| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2015 MediaTek Inc. |
| * Author: |
| * Zhigang.Wei <zhigang.wei@mediatek.com> |
| * Chunfeng.Yun <chunfeng.yun@mediatek.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| |
| #include "xhci.h" |
| #include "xhci-mtk.h" |
| |
| #define SS_BW_BOUNDARY 51000 |
| /* table 5-5. High-speed Isoc Transaction Limits in usb_20 spec */ |
| #define HS_BW_BOUNDARY 6144 |
| /* usb2 spec section11.18.1: at most 188 FS bytes per microframe */ |
| #define FS_PAYLOAD_MAX 188 |
| |
| /* mtk scheduler bitmasks */ |
| #define EP_BPKTS(p) ((p) & 0x3f) |
| #define EP_BCSCOUNT(p) (((p) & 0x7) << 8) |
| #define EP_BBM(p) ((p) << 11) |
| #define EP_BOFFSET(p) ((p) & 0x3fff) |
| #define EP_BREPEAT(p) (((p) & 0x7fff) << 16) |
| |
| static int is_fs_or_ls(enum usb_device_speed speed) |
| { |
| return speed == USB_SPEED_FULL || speed == USB_SPEED_LOW; |
| } |
| |
| /* |
| * get the index of bandwidth domains array which @ep belongs to. |
| * |
| * the bandwidth domain array is saved to @sch_array of struct xhci_hcd_mtk, |
| * each HS root port is treated as a single bandwidth domain, |
| * but each SS root port is treated as two bandwidth domains, one for IN eps, |
| * one for OUT eps. |
| * @real_port value is defined as follow according to xHCI spec: |
| * 1 for SSport0, ..., N+1 for SSportN, N+2 for HSport0, N+3 for HSport1, etc |
| * so the bandwidth domain array is organized as follow for simplification: |
| * SSport0-OUT, SSport0-IN, ..., SSportX-OUT, SSportX-IN, HSport0, ..., HSportY |
| */ |
| static int get_bw_index(struct xhci_hcd *xhci, struct usb_device *udev, |
| struct usb_host_endpoint *ep) |
| { |
| struct xhci_virt_device *virt_dev; |
| int bw_index; |
| |
| virt_dev = xhci->devs[udev->slot_id]; |
| |
| if (udev->speed == USB_SPEED_SUPER) { |
| if (usb_endpoint_dir_out(&ep->desc)) |
| bw_index = (virt_dev->real_port - 1) * 2; |
| else |
| bw_index = (virt_dev->real_port - 1) * 2 + 1; |
| } else { |
| /* add one more for each SS port */ |
| bw_index = virt_dev->real_port + xhci->usb3_rhub.num_ports - 1; |
| } |
| |
| return bw_index; |
| } |
| |
| static void setup_sch_info(struct usb_device *udev, |
| struct xhci_ep_ctx *ep_ctx, struct mu3h_sch_ep_info *sch_ep) |
| { |
| u32 ep_type; |
| u32 ep_interval; |
| u32 max_packet_size; |
| u32 max_burst; |
| u32 mult; |
| u32 esit_pkts; |
| |
| ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2)); |
| ep_interval = CTX_TO_EP_INTERVAL(le32_to_cpu(ep_ctx->ep_info)); |
| max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2)); |
| max_burst = CTX_TO_MAX_BURST(le32_to_cpu(ep_ctx->ep_info2)); |
| mult = CTX_TO_EP_MULT(le32_to_cpu(ep_ctx->ep_info)); |
| |
| sch_ep->esit = 1 << ep_interval; |
| sch_ep->offset = 0; |
| sch_ep->burst_mode = 0; |
| |
| if (udev->speed == USB_SPEED_HIGH) { |
| sch_ep->cs_count = 0; |
| |
| /* |
| * usb_20 spec section5.9 |
| * a single microframe is enough for HS synchromous endpoints |
| * in a interval |
| */ |
| sch_ep->num_budget_microframes = 1; |
| sch_ep->repeat = 0; |
| |
| /* |
| * xHCI spec section6.2.3.4 |
| * @max_burst is the number of additional transactions |
| * opportunities per microframe |
| */ |
| sch_ep->pkts = max_burst + 1; |
| sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts; |
| } else if (udev->speed == USB_SPEED_SUPER) { |
| /* usb3_r1 spec section4.4.7 & 4.4.8 */ |
| sch_ep->cs_count = 0; |
| esit_pkts = (mult + 1) * (max_burst + 1); |
| if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { |
| sch_ep->pkts = esit_pkts; |
| sch_ep->num_budget_microframes = 1; |
| sch_ep->repeat = 0; |
| } |
| |
| if (ep_type == ISOC_IN_EP || ep_type == ISOC_OUT_EP) { |
| if (esit_pkts <= sch_ep->esit) |
| sch_ep->pkts = 1; |
| else |
| sch_ep->pkts = roundup_pow_of_two(esit_pkts) |
| / sch_ep->esit; |
| |
| sch_ep->num_budget_microframes = |
| DIV_ROUND_UP(esit_pkts, sch_ep->pkts); |
| |
| if (sch_ep->num_budget_microframes > 1) |
| sch_ep->repeat = 1; |
| else |
| sch_ep->repeat = 0; |
| } |
| sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts; |
| } else if (is_fs_or_ls(udev->speed)) { |
| |
| /* |
| * usb_20 spec section11.18.4 |
| * assume worst cases |
| */ |
| sch_ep->repeat = 0; |
| sch_ep->pkts = 1; /* at most one packet for each microframe */ |
| if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { |
| sch_ep->cs_count = 3; /* at most need 3 CS*/ |
| /* one for SS and one for budgeted transaction */ |
| sch_ep->num_budget_microframes = sch_ep->cs_count + 2; |
| sch_ep->bw_cost_per_microframe = max_packet_size; |
| } |
| if (ep_type == ISOC_OUT_EP) { |
| |
| /* |
| * the best case FS budget assumes that 188 FS bytes |
| * occur in each microframe |
| */ |
| sch_ep->num_budget_microframes = DIV_ROUND_UP( |
| max_packet_size, FS_PAYLOAD_MAX); |
| sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX; |
| sch_ep->cs_count = sch_ep->num_budget_microframes; |
| } |
| if (ep_type == ISOC_IN_EP) { |
| /* at most need additional two CS. */ |
| sch_ep->cs_count = DIV_ROUND_UP( |
| max_packet_size, FS_PAYLOAD_MAX) + 2; |
| sch_ep->num_budget_microframes = sch_ep->cs_count + 2; |
| sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX; |
| } |
| } |
| } |
| |
| /* Get maximum bandwidth when we schedule at offset slot. */ |
| static u32 get_max_bw(struct mu3h_sch_bw_info *sch_bw, |
| struct mu3h_sch_ep_info *sch_ep, u32 offset) |
| { |
| u32 num_esit; |
| u32 max_bw = 0; |
| int i; |
| int j; |
| |
| num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; |
| for (i = 0; i < num_esit; i++) { |
| u32 base = offset + i * sch_ep->esit; |
| |
| for (j = 0; j < sch_ep->num_budget_microframes; j++) { |
| if (sch_bw->bus_bw[base + j] > max_bw) |
| max_bw = sch_bw->bus_bw[base + j]; |
| } |
| } |
| return max_bw; |
| } |
| |
| static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw, |
| struct mu3h_sch_ep_info *sch_ep, int bw_cost) |
| { |
| u32 num_esit; |
| u32 base; |
| int i; |
| int j; |
| |
| num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; |
| for (i = 0; i < num_esit; i++) { |
| base = sch_ep->offset + i * sch_ep->esit; |
| for (j = 0; j < sch_ep->num_budget_microframes; j++) |
| sch_bw->bus_bw[base + j] += bw_cost; |
| } |
| } |
| |
| static int check_sch_bw(struct usb_device *udev, |
| struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep) |
| { |
| u32 offset; |
| u32 esit; |
| u32 num_budget_microframes; |
| u32 min_bw; |
| u32 min_index; |
| u32 worst_bw; |
| u32 bw_boundary; |
| |
| if (sch_ep->esit > XHCI_MTK_MAX_ESIT) |
| sch_ep->esit = XHCI_MTK_MAX_ESIT; |
| |
| esit = sch_ep->esit; |
| num_budget_microframes = sch_ep->num_budget_microframes; |
| |
| /* |
| * Search through all possible schedule microframes. |
| * and find a microframe where its worst bandwidth is minimum. |
| */ |
| min_bw = ~0; |
| min_index = 0; |
| for (offset = 0; offset < esit; offset++) { |
| if ((offset + num_budget_microframes) > sch_ep->esit) |
| break; |
| |
| /* |
| * usb_20 spec section11.18: |
| * must never schedule Start-Split in Y6 |
| */ |
| if (is_fs_or_ls(udev->speed) && (offset % 8 == 6)) |
| continue; |
| |
| worst_bw = get_max_bw(sch_bw, sch_ep, offset); |
| if (min_bw > worst_bw) { |
| min_bw = worst_bw; |
| min_index = offset; |
| } |
| if (min_bw == 0) |
| break; |
| } |
| sch_ep->offset = min_index; |
| |
| bw_boundary = (udev->speed == USB_SPEED_SUPER) |
| ? SS_BW_BOUNDARY : HS_BW_BOUNDARY; |
| |
| /* check bandwidth */ |
| if (min_bw + sch_ep->bw_cost_per_microframe > bw_boundary) |
| return -ERANGE; |
| |
| /* update bus bandwidth info */ |
| update_bus_bw(sch_bw, sch_ep, sch_ep->bw_cost_per_microframe); |
| |
| return 0; |
| } |
| |
| static bool need_bw_sch(struct usb_host_endpoint *ep, |
| enum usb_device_speed speed, int has_tt) |
| { |
| /* only for periodic endpoints */ |
| if (usb_endpoint_xfer_control(&ep->desc) |
| || usb_endpoint_xfer_bulk(&ep->desc)) |
| return false; |
| |
| /* |
| * for LS & FS periodic endpoints which its device is not behind |
| * a TT are also ignored, root-hub will schedule them directly, |
| * but need set @bpkts field of endpoint context to 1. |
| */ |
| if (is_fs_or_ls(speed) && !has_tt) |
| return false; |
| |
| return true; |
| } |
| |
| int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk) |
| { |
| struct xhci_hcd *xhci = hcd_to_xhci(mtk->hcd); |
| struct mu3h_sch_bw_info *sch_array; |
| int num_usb_bus; |
| int i; |
| |
| /* ss IN and OUT are separated */ |
| num_usb_bus = xhci->usb3_rhub.num_ports * 2 + xhci->usb2_rhub.num_ports; |
| |
| sch_array = kcalloc(num_usb_bus, sizeof(*sch_array), GFP_KERNEL); |
| if (sch_array == NULL) |
| return -ENOMEM; |
| |
| for (i = 0; i < num_usb_bus; i++) |
| INIT_LIST_HEAD(&sch_array[i].bw_ep_list); |
| |
| mtk->sch_array = sch_array; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(xhci_mtk_sch_init); |
| |
| void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk) |
| { |
| kfree(mtk->sch_array); |
| } |
| EXPORT_SYMBOL_GPL(xhci_mtk_sch_exit); |
| |
| int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, |
| struct usb_host_endpoint *ep) |
| { |
| struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd); |
| struct xhci_hcd *xhci; |
| struct xhci_ep_ctx *ep_ctx; |
| struct xhci_slot_ctx *slot_ctx; |
| struct xhci_virt_device *virt_dev; |
| struct mu3h_sch_bw_info *sch_bw; |
| struct mu3h_sch_ep_info *sch_ep; |
| struct mu3h_sch_bw_info *sch_array; |
| unsigned int ep_index; |
| int bw_index; |
| int ret = 0; |
| |
| xhci = hcd_to_xhci(hcd); |
| virt_dev = xhci->devs[udev->slot_id]; |
| ep_index = xhci_get_endpoint_index(&ep->desc); |
| slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); |
| ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); |
| sch_array = mtk->sch_array; |
| |
| xhci_dbg(xhci, "%s() type:%d, speed:%d, mpkt:%d, dir:%d, ep:%p\n", |
| __func__, usb_endpoint_type(&ep->desc), udev->speed, |
| usb_endpoint_maxp(&ep->desc), |
| usb_endpoint_dir_in(&ep->desc), ep); |
| |
| if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) { |
| /* |
| * set @bpkts to 1 if it is LS or FS periodic endpoint, and its |
| * device does not connected through an external HS hub |
| */ |
| if (usb_endpoint_xfer_int(&ep->desc) |
| || usb_endpoint_xfer_isoc(&ep->desc)) |
| ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(1)); |
| |
| return 0; |
| } |
| |
| bw_index = get_bw_index(xhci, udev, ep); |
| sch_bw = &sch_array[bw_index]; |
| |
| sch_ep = kzalloc(sizeof(struct mu3h_sch_ep_info), GFP_NOIO); |
| if (!sch_ep) |
| return -ENOMEM; |
| |
| setup_sch_info(udev, ep_ctx, sch_ep); |
| |
| ret = check_sch_bw(udev, sch_bw, sch_ep); |
| if (ret) { |
| xhci_err(xhci, "Not enough bandwidth!\n"); |
| kfree(sch_ep); |
| return -ENOSPC; |
| } |
| |
| list_add_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list); |
| sch_ep->ep = ep; |
| |
| ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts) |
| | EP_BCSCOUNT(sch_ep->cs_count) | EP_BBM(sch_ep->burst_mode)); |
| ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset) |
| | EP_BREPEAT(sch_ep->repeat)); |
| |
| xhci_dbg(xhci, " PKTS:%x, CSCOUNT:%x, BM:%x, OFFSET:%x, REPEAT:%x\n", |
| sch_ep->pkts, sch_ep->cs_count, sch_ep->burst_mode, |
| sch_ep->offset, sch_ep->repeat); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(xhci_mtk_add_ep_quirk); |
| |
| void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, |
| struct usb_host_endpoint *ep) |
| { |
| struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd); |
| struct xhci_hcd *xhci; |
| struct xhci_slot_ctx *slot_ctx; |
| struct xhci_virt_device *virt_dev; |
| struct mu3h_sch_bw_info *sch_array; |
| struct mu3h_sch_bw_info *sch_bw; |
| struct mu3h_sch_ep_info *sch_ep; |
| int bw_index; |
| |
| xhci = hcd_to_xhci(hcd); |
| virt_dev = xhci->devs[udev->slot_id]; |
| slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); |
| sch_array = mtk->sch_array; |
| |
| xhci_dbg(xhci, "%s() type:%d, speed:%d, mpks:%d, dir:%d, ep:%p\n", |
| __func__, usb_endpoint_type(&ep->desc), udev->speed, |
| usb_endpoint_maxp(&ep->desc), |
| usb_endpoint_dir_in(&ep->desc), ep); |
| |
| if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) |
| return; |
| |
| bw_index = get_bw_index(xhci, udev, ep); |
| sch_bw = &sch_array[bw_index]; |
| |
| list_for_each_entry(sch_ep, &sch_bw->bw_ep_list, endpoint) { |
| if (sch_ep->ep == ep) { |
| update_bus_bw(sch_bw, sch_ep, |
| -sch_ep->bw_cost_per_microframe); |
| list_del(&sch_ep->endpoint); |
| kfree(sch_ep); |
| break; |
| } |
| } |
| } |
| EXPORT_SYMBOL_GPL(xhci_mtk_drop_ep_quirk); |