blob: 4f33dbc6734824142968b1062119b50a83475557 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/* Copyright (c) 2017 Microsemi Corporation */
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mscc,ocelot";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "mips,mips24KEc";
device_type = "cpu";
clocks = <&cpu_clk>;
reg = <0>;
};
};
aliases {
serial0 = &uart0;
};
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
cpu_clk: cpu-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <500000000>;
};
ahb_clk: ahb-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clocks = <&cpu_clk>;
clock-div = <2>;
clock-mult = <1>;
};
ahb@70000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x70000000 0x2000000>;
interrupt-parent = <&intc>;
cpu_ctrl: syscon@0 {
compatible = "mscc,ocelot-cpu-syscon", "syscon";
reg = <0x0 0x2c>;
};
intc: interrupt-controller@70 {
compatible = "mscc,ocelot-icpu-intr";
reg = <0x70 0x70>;
#interrupt-cells = <1>;
interrupt-controller;
interrupt-parent = <&cpuintc>;
interrupts = <2>;
};
uart0: serial@100000 {
pinctrl-0 = <&uart_pins>;
pinctrl-names = "default";
compatible = "ns16550a";
reg = <0x100000 0x20>;
interrupts = <6>;
clocks = <&ahb_clk>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
uart2: serial@100800 {
pinctrl-0 = <&uart2_pins>;
pinctrl-names = "default";
compatible = "ns16550a";
reg = <0x100800 0x20>;
interrupts = <7>;
clocks = <&ahb_clk>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
switch@1010000 {
compatible = "mscc,vsc7514-switch";
reg = <0x1010000 0x10000>,
<0x1030000 0x10000>,
<0x1080000 0x100>,
<0x10d0000 0x10000>,
<0x11e0000 0x100>,
<0x11f0000 0x100>,
<0x1200000 0x100>,
<0x1210000 0x100>,
<0x1220000 0x100>,
<0x1230000 0x100>,
<0x1240000 0x100>,
<0x1250000 0x100>,
<0x1260000 0x100>,
<0x1270000 0x100>,
<0x1280000 0x100>,
<0x1800000 0x80000>,
<0x1880000 0x10000>;
reg-names = "sys", "rew", "qs", "hsio", "port0",
"port1", "port2", "port3", "port4", "port5",
"port6", "port7", "port8", "port9", "port10",
"qsys", "ana";
interrupts = <21 22>;
interrupt-names = "xtr", "inj";
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port0: port@0 {
reg = <0>;
};
port1: port@1 {
reg = <1>;
};
port2: port@2 {
reg = <2>;
};
port3: port@3 {
reg = <3>;
};
port4: port@4 {
reg = <4>;
};
port5: port@5 {
reg = <5>;
};
port6: port@6 {
reg = <6>;
};
port7: port@7 {
reg = <7>;
};
port8: port@8 {
reg = <8>;
};
port9: port@9 {
reg = <9>;
};
port10: port@10 {
reg = <10>;
};
};
};
reset@1070008 {
compatible = "mscc,ocelot-chip-reset";
reg = <0x1070008 0x4>;
};
gpio: pinctrl@1070034 {
compatible = "mscc,ocelot-pinctrl";
reg = <0x1070034 0x68>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&gpio 0 0 22>;
uart_pins: uart-pins {
pins = "GPIO_6", "GPIO_7";
function = "uart";
};
uart2_pins: uart2-pins {
pins = "GPIO_12", "GPIO_13";
function = "uart2";
};
};
mdio0: mdio@107009c {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mscc,ocelot-miim";
reg = <0x107009c 0x36>, <0x10700f0 0x8>;
interrupts = <14>;
status = "disabled";
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
phy2: ethernet-phy@2 {
reg = <2>;
};
phy3: ethernet-phy@3 {
reg = <3>;
};
};
};
};