|  | /* | 
|  | * Copyright 2002-2005, Instant802 Networks, Inc. | 
|  | * Copyright 2005-2006, Devicescape Software, Inc. | 
|  | * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
|  | * Copyright 2007	Johannes Berg <johannes@sipsolutions.net> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/rcupdate.h> | 
|  | #include <net/mac80211.h> | 
|  | #include <net/ieee80211_radiotap.h> | 
|  |  | 
|  | #include "ieee80211_i.h" | 
|  | #include "ieee80211_led.h" | 
|  | #include "wep.h" | 
|  | #include "wpa.h" | 
|  | #include "tkip.h" | 
|  | #include "wme.h" | 
|  |  | 
|  | u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, | 
|  | struct tid_ampdu_rx *tid_agg_rx, | 
|  | struct sk_buff *skb, u16 mpdu_seq_num, | 
|  | int bar_req); | 
|  | /* | 
|  | * monitor mode reception | 
|  | * | 
|  | * This function cleans up the SKB, i.e. it removes all the stuff | 
|  | * only useful for monitoring. | 
|  | */ | 
|  | static struct sk_buff *remove_monitor_info(struct ieee80211_local *local, | 
|  | struct sk_buff *skb, | 
|  | int rtap_len) | 
|  | { | 
|  | skb_pull(skb, rtap_len); | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) { | 
|  | if (likely(skb->len > FCS_LEN)) | 
|  | skb_trim(skb, skb->len - FCS_LEN); | 
|  | else { | 
|  | /* driver bug */ | 
|  | WARN_ON(1); | 
|  | dev_kfree_skb(skb); | 
|  | skb = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | static inline int should_drop_frame(struct ieee80211_rx_status *status, | 
|  | struct sk_buff *skb, | 
|  | int present_fcs_len, | 
|  | int radiotap_len) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
|  |  | 
|  | if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC)) | 
|  | return 1; | 
|  | if (unlikely(skb->len < 16 + present_fcs_len + radiotap_len)) | 
|  | return 1; | 
|  | if (((hdr->frame_control & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == | 
|  | cpu_to_le16(IEEE80211_FTYPE_CTL)) && | 
|  | ((hdr->frame_control & cpu_to_le16(IEEE80211_FCTL_STYPE)) != | 
|  | cpu_to_le16(IEEE80211_STYPE_PSPOLL)) && | 
|  | ((hdr->frame_control & cpu_to_le16(IEEE80211_FCTL_STYPE)) != | 
|  | cpu_to_le16(IEEE80211_STYPE_BACK_REQ))) | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function copies a received frame to all monitor interfaces and | 
|  | * returns a cleaned-up SKB that no longer includes the FCS nor the | 
|  | * radiotap header the driver might have added. | 
|  | */ | 
|  | static struct sk_buff * | 
|  | ieee80211_rx_monitor(struct ieee80211_local *local, struct sk_buff *origskb, | 
|  | struct ieee80211_rx_status *status) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct ieee80211_rate *rate; | 
|  | int needed_headroom = 0; | 
|  | struct ieee80211_radiotap_header *rthdr; | 
|  | __le64 *rttsft = NULL; | 
|  | struct ieee80211_rtap_fixed_data { | 
|  | u8 flags; | 
|  | u8 rate; | 
|  | __le16 chan_freq; | 
|  | __le16 chan_flags; | 
|  | u8 antsignal; | 
|  | u8 padding_for_rxflags; | 
|  | __le16 rx_flags; | 
|  | } __attribute__ ((packed)) *rtfixed; | 
|  | struct sk_buff *skb, *skb2; | 
|  | struct net_device *prev_dev = NULL; | 
|  | int present_fcs_len = 0; | 
|  | int rtap_len = 0; | 
|  |  | 
|  | /* | 
|  | * First, we may need to make a copy of the skb because | 
|  | *  (1) we need to modify it for radiotap (if not present), and | 
|  | *  (2) the other RX handlers will modify the skb we got. | 
|  | * | 
|  | * We don't need to, of course, if we aren't going to return | 
|  | * the SKB because it has a bad FCS/PLCP checksum. | 
|  | */ | 
|  | if (status->flag & RX_FLAG_RADIOTAP) | 
|  | rtap_len = ieee80211_get_radiotap_len(origskb->data); | 
|  | else | 
|  | /* room for radiotap header, always present fields and TSFT */ | 
|  | needed_headroom = sizeof(*rthdr) + sizeof(*rtfixed) + 8; | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) | 
|  | present_fcs_len = FCS_LEN; | 
|  |  | 
|  | if (!local->monitors) { | 
|  | if (should_drop_frame(status, origskb, present_fcs_len, | 
|  | rtap_len)) { | 
|  | dev_kfree_skb(origskb); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return remove_monitor_info(local, origskb, rtap_len); | 
|  | } | 
|  |  | 
|  | if (should_drop_frame(status, origskb, present_fcs_len, rtap_len)) { | 
|  | /* only need to expand headroom if necessary */ | 
|  | skb = origskb; | 
|  | origskb = NULL; | 
|  |  | 
|  | /* | 
|  | * This shouldn't trigger often because most devices have an | 
|  | * RX header they pull before we get here, and that should | 
|  | * be big enough for our radiotap information. We should | 
|  | * probably export the length to drivers so that we can have | 
|  | * them allocate enough headroom to start with. | 
|  | */ | 
|  | if (skb_headroom(skb) < needed_headroom && | 
|  | pskb_expand_head(skb, needed_headroom, 0, GFP_ATOMIC)) { | 
|  | dev_kfree_skb(skb); | 
|  | return NULL; | 
|  | } | 
|  | } else { | 
|  | /* | 
|  | * Need to make a copy and possibly remove radiotap header | 
|  | * and FCS from the original. | 
|  | */ | 
|  | skb = skb_copy_expand(origskb, needed_headroom, 0, GFP_ATOMIC); | 
|  |  | 
|  | origskb = remove_monitor_info(local, origskb, rtap_len); | 
|  |  | 
|  | if (!skb) | 
|  | return origskb; | 
|  | } | 
|  |  | 
|  | /* if necessary, prepend radiotap information */ | 
|  | if (!(status->flag & RX_FLAG_RADIOTAP)) { | 
|  | rtfixed = (void *) skb_push(skb, sizeof(*rtfixed)); | 
|  | rtap_len = sizeof(*rthdr) + sizeof(*rtfixed); | 
|  | if (status->flag & RX_FLAG_TSFT) { | 
|  | rttsft = (void *) skb_push(skb, sizeof(*rttsft)); | 
|  | rtap_len += 8; | 
|  | } | 
|  | rthdr = (void *) skb_push(skb, sizeof(*rthdr)); | 
|  | memset(rthdr, 0, sizeof(*rthdr)); | 
|  | memset(rtfixed, 0, sizeof(*rtfixed)); | 
|  | rthdr->it_present = | 
|  | cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) | | 
|  | (1 << IEEE80211_RADIOTAP_RATE) | | 
|  | (1 << IEEE80211_RADIOTAP_CHANNEL) | | 
|  | (1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL) | | 
|  | (1 << IEEE80211_RADIOTAP_RX_FLAGS)); | 
|  | rtfixed->flags = 0; | 
|  | if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) | 
|  | rtfixed->flags |= IEEE80211_RADIOTAP_F_FCS; | 
|  |  | 
|  | if (rttsft) { | 
|  | *rttsft = cpu_to_le64(status->mactime); | 
|  | rthdr->it_present |= | 
|  | cpu_to_le32(1 << IEEE80211_RADIOTAP_TSFT); | 
|  | } | 
|  |  | 
|  | /* FIXME: when radiotap gets a 'bad PLCP' flag use it here */ | 
|  | rtfixed->rx_flags = 0; | 
|  | if (status->flag & | 
|  | (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC)) | 
|  | rtfixed->rx_flags |= | 
|  | cpu_to_le16(IEEE80211_RADIOTAP_F_RX_BADFCS); | 
|  |  | 
|  | rate = ieee80211_get_rate(local, status->phymode, | 
|  | status->rate); | 
|  | if (rate) | 
|  | rtfixed->rate = rate->rate / 5; | 
|  |  | 
|  | rtfixed->chan_freq = cpu_to_le16(status->freq); | 
|  |  | 
|  | if (status->phymode == MODE_IEEE80211A) | 
|  | rtfixed->chan_flags = | 
|  | cpu_to_le16(IEEE80211_CHAN_OFDM | | 
|  | IEEE80211_CHAN_5GHZ); | 
|  | else | 
|  | rtfixed->chan_flags = | 
|  | cpu_to_le16(IEEE80211_CHAN_DYN | | 
|  | IEEE80211_CHAN_2GHZ); | 
|  |  | 
|  | rtfixed->antsignal = status->ssi; | 
|  | rthdr->it_len = cpu_to_le16(rtap_len); | 
|  | } | 
|  |  | 
|  | skb_reset_mac_header(skb); | 
|  | skb->ip_summed = CHECKSUM_UNNECESSARY; | 
|  | skb->pkt_type = PACKET_OTHERHOST; | 
|  | skb->protocol = htons(ETH_P_802_2); | 
|  |  | 
|  | list_for_each_entry_rcu(sdata, &local->interfaces, list) { | 
|  | if (!netif_running(sdata->dev)) | 
|  | continue; | 
|  |  | 
|  | if (sdata->vif.type != IEEE80211_IF_TYPE_MNTR) | 
|  | continue; | 
|  |  | 
|  | if (prev_dev) { | 
|  | skb2 = skb_clone(skb, GFP_ATOMIC); | 
|  | if (skb2) { | 
|  | skb2->dev = prev_dev; | 
|  | netif_rx(skb2); | 
|  | } | 
|  | } | 
|  |  | 
|  | prev_dev = sdata->dev; | 
|  | sdata->dev->stats.rx_packets++; | 
|  | sdata->dev->stats.rx_bytes += skb->len; | 
|  | } | 
|  |  | 
|  | if (prev_dev) { | 
|  | skb->dev = prev_dev; | 
|  | netif_rx(skb); | 
|  | } else | 
|  | dev_kfree_skb(skb); | 
|  |  | 
|  | return origskb; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* pre-rx handlers | 
|  | * | 
|  | * these don't have dev/sdata fields in the rx data | 
|  | * The sta value should also not be used because it may | 
|  | * be NULL even though a STA (in IBSS mode) will be added. | 
|  | */ | 
|  |  | 
|  | static ieee80211_txrx_result | 
|  | ieee80211_rx_h_parse_qos(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | u8 *data = rx->skb->data; | 
|  | int tid; | 
|  |  | 
|  | /* does the frame have a qos control field? */ | 
|  | if (WLAN_FC_IS_QOS_DATA(rx->fc)) { | 
|  | u8 *qc = data + ieee80211_get_hdrlen(rx->fc) - QOS_CONTROL_LEN; | 
|  | /* frame has qos control */ | 
|  | tid = qc[0] & QOS_CONTROL_TID_MASK; | 
|  | if (qc[0] & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT) | 
|  | rx->flags |= IEEE80211_TXRXD_RX_AMSDU; | 
|  | else | 
|  | rx->flags &= ~IEEE80211_TXRXD_RX_AMSDU; | 
|  | } else { | 
|  | if (unlikely((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)) { | 
|  | /* Separate TID for management frames */ | 
|  | tid = NUM_RX_DATA_QUEUES - 1; | 
|  | } else { | 
|  | /* no qos control present */ | 
|  | tid = 0; /* 802.1d - Best Effort */ | 
|  | } | 
|  | } | 
|  |  | 
|  | I802_DEBUG_INC(rx->local->wme_rx_queue[tid]); | 
|  | /* only a debug counter, sta might not be assigned properly yet */ | 
|  | if (rx->sta) | 
|  | I802_DEBUG_INC(rx->sta->wme_rx_queue[tid]); | 
|  |  | 
|  | rx->u.rx.queue = tid; | 
|  | /* Set skb->priority to 1d tag if highest order bit of TID is not set. | 
|  | * For now, set skb->priority to 0 for other cases. */ | 
|  | rx->skb->priority = (tid > 7) ? 0 : tid; | 
|  |  | 
|  | return TXRX_CONTINUE; | 
|  | } | 
|  |  | 
|  |  | 
|  | static u32 ieee80211_rx_load_stats(struct ieee80211_local *local, | 
|  | struct sk_buff *skb, | 
|  | struct ieee80211_rx_status *status) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
|  | u32 load = 0, hdrtime; | 
|  | struct ieee80211_rate *rate; | 
|  | struct ieee80211_hw_mode *mode = local->hw.conf.mode; | 
|  | int i; | 
|  |  | 
|  | /* Estimate total channel use caused by this frame */ | 
|  |  | 
|  | if (unlikely(mode->num_rates < 0)) | 
|  | return TXRX_CONTINUE; | 
|  |  | 
|  | rate = &mode->rates[0]; | 
|  | for (i = 0; i < mode->num_rates; i++) { | 
|  | if (mode->rates[i].val == status->rate) { | 
|  | rate = &mode->rates[i]; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* 1 bit at 1 Mbit/s takes 1 usec; in channel_use values, | 
|  | * 1 usec = 1/8 * (1080 / 10) = 13.5 */ | 
|  |  | 
|  | if (mode->mode == MODE_IEEE80211A || | 
|  | (mode->mode == MODE_IEEE80211G && | 
|  | rate->flags & IEEE80211_RATE_ERP)) | 
|  | hdrtime = CHAN_UTIL_HDR_SHORT; | 
|  | else | 
|  | hdrtime = CHAN_UTIL_HDR_LONG; | 
|  |  | 
|  | load = hdrtime; | 
|  | if (!is_multicast_ether_addr(hdr->addr1)) | 
|  | load += hdrtime; | 
|  |  | 
|  | load += skb->len * rate->rate_inv; | 
|  |  | 
|  | /* Divide channel_use by 8 to avoid wrapping around the counter */ | 
|  | load >>= CHAN_UTIL_SHIFT; | 
|  |  | 
|  | return load; | 
|  | } | 
|  |  | 
|  | ieee80211_rx_handler ieee80211_rx_pre_handlers[] = | 
|  | { | 
|  | ieee80211_rx_h_parse_qos, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | /* rx handlers */ | 
|  |  | 
|  | static ieee80211_txrx_result | 
|  | ieee80211_rx_h_if_stats(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | if (rx->sta) | 
|  | rx->sta->channel_use_raw += rx->u.rx.load; | 
|  | rx->sdata->channel_use_raw += rx->u.rx.load; | 
|  | return TXRX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static ieee80211_txrx_result | 
|  | ieee80211_rx_h_passive_scan(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | struct ieee80211_local *local = rx->local; | 
|  | struct sk_buff *skb = rx->skb; | 
|  |  | 
|  | if (unlikely(local->sta_hw_scanning)) | 
|  | return ieee80211_sta_rx_scan(rx->dev, skb, rx->u.rx.status); | 
|  |  | 
|  | if (unlikely(local->sta_sw_scanning)) { | 
|  | /* drop all the other packets during a software scan anyway */ | 
|  | if (ieee80211_sta_rx_scan(rx->dev, skb, rx->u.rx.status) | 
|  | != TXRX_QUEUED) | 
|  | dev_kfree_skb(skb); | 
|  | return TXRX_QUEUED; | 
|  | } | 
|  |  | 
|  | if (unlikely(rx->flags & IEEE80211_TXRXD_RXIN_SCAN)) { | 
|  | /* scanning finished during invoking of handlers */ | 
|  | I802_DEBUG_INC(local->rx_handlers_drop_passive_scan); | 
|  | return TXRX_DROP; | 
|  | } | 
|  |  | 
|  | return TXRX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static ieee80211_txrx_result | 
|  | ieee80211_rx_h_check(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | struct ieee80211_hdr *hdr; | 
|  | hdr = (struct ieee80211_hdr *) rx->skb->data; | 
|  |  | 
|  | /* Drop duplicate 802.11 retransmissions (IEEE 802.11 Chap. 9.2.9) */ | 
|  | if (rx->sta && !is_multicast_ether_addr(hdr->addr1)) { | 
|  | if (unlikely(rx->fc & IEEE80211_FCTL_RETRY && | 
|  | rx->sta->last_seq_ctrl[rx->u.rx.queue] == | 
|  | hdr->seq_ctrl)) { | 
|  | if (rx->flags & IEEE80211_TXRXD_RXRA_MATCH) { | 
|  | rx->local->dot11FrameDuplicateCount++; | 
|  | rx->sta->num_duplicates++; | 
|  | } | 
|  | return TXRX_DROP; | 
|  | } else | 
|  | rx->sta->last_seq_ctrl[rx->u.rx.queue] = hdr->seq_ctrl; | 
|  | } | 
|  |  | 
|  | if (unlikely(rx->skb->len < 16)) { | 
|  | I802_DEBUG_INC(rx->local->rx_handlers_drop_short); | 
|  | return TXRX_DROP; | 
|  | } | 
|  |  | 
|  | /* Drop disallowed frame classes based on STA auth/assoc state; | 
|  | * IEEE 802.11, Chap 5.5. | 
|  | * | 
|  | * 80211.o does filtering only based on association state, i.e., it | 
|  | * drops Class 3 frames from not associated stations. hostapd sends | 
|  | * deauth/disassoc frames when needed. In addition, hostapd is | 
|  | * responsible for filtering on both auth and assoc states. | 
|  | */ | 
|  | if (unlikely(((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA || | 
|  | ((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL && | 
|  | (rx->fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PSPOLL)) && | 
|  | rx->sdata->vif.type != IEEE80211_IF_TYPE_IBSS && | 
|  | (!rx->sta || !(rx->sta->flags & WLAN_STA_ASSOC)))) { | 
|  | if ((!(rx->fc & IEEE80211_FCTL_FROMDS) && | 
|  | !(rx->fc & IEEE80211_FCTL_TODS) && | 
|  | (rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) | 
|  | || !(rx->flags & IEEE80211_TXRXD_RXRA_MATCH)) { | 
|  | /* Drop IBSS frames and frames for other hosts | 
|  | * silently. */ | 
|  | return TXRX_DROP; | 
|  | } | 
|  |  | 
|  | return TXRX_DROP; | 
|  | } | 
|  |  | 
|  | return TXRX_CONTINUE; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ieee80211_txrx_result | 
|  | ieee80211_rx_h_decrypt(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) rx->skb->data; | 
|  | int keyidx; | 
|  | int hdrlen; | 
|  | ieee80211_txrx_result result = TXRX_DROP; | 
|  | struct ieee80211_key *stakey = NULL; | 
|  |  | 
|  | /* | 
|  | * Key selection 101 | 
|  | * | 
|  | * There are three types of keys: | 
|  | *  - GTK (group keys) | 
|  | *  - PTK (pairwise keys) | 
|  | *  - STK (station-to-station pairwise keys) | 
|  | * | 
|  | * When selecting a key, we have to distinguish between multicast | 
|  | * (including broadcast) and unicast frames, the latter can only | 
|  | * use PTKs and STKs while the former always use GTKs. Unless, of | 
|  | * course, actual WEP keys ("pre-RSNA") are used, then unicast | 
|  | * frames can also use key indizes like GTKs. Hence, if we don't | 
|  | * have a PTK/STK we check the key index for a WEP key. | 
|  | * | 
|  | * Note that in a regular BSS, multicast frames are sent by the | 
|  | * AP only, associated stations unicast the frame to the AP first | 
|  | * which then multicasts it on their behalf. | 
|  | * | 
|  | * There is also a slight problem in IBSS mode: GTKs are negotiated | 
|  | * with each station, that is something we don't currently handle. | 
|  | * The spec seems to expect that one negotiates the same key with | 
|  | * every station but there's no such requirement; VLANs could be | 
|  | * possible. | 
|  | */ | 
|  |  | 
|  | if (!(rx->fc & IEEE80211_FCTL_PROTECTED)) | 
|  | return TXRX_CONTINUE; | 
|  |  | 
|  | /* | 
|  | * No point in finding a key and decrypting if the frame is neither | 
|  | * addressed to us nor a multicast frame. | 
|  | */ | 
|  | if (!(rx->flags & IEEE80211_TXRXD_RXRA_MATCH)) | 
|  | return TXRX_CONTINUE; | 
|  |  | 
|  | if (rx->sta) | 
|  | stakey = rcu_dereference(rx->sta->key); | 
|  |  | 
|  | if (!is_multicast_ether_addr(hdr->addr1) && stakey) { | 
|  | rx->key = stakey; | 
|  | } else { | 
|  | /* | 
|  | * The device doesn't give us the IV so we won't be | 
|  | * able to look up the key. That's ok though, we | 
|  | * don't need to decrypt the frame, we just won't | 
|  | * be able to keep statistics accurate. | 
|  | * Except for key threshold notifications, should | 
|  | * we somehow allow the driver to tell us which key | 
|  | * the hardware used if this flag is set? | 
|  | */ | 
|  | if ((rx->u.rx.status->flag & RX_FLAG_DECRYPTED) && | 
|  | (rx->u.rx.status->flag & RX_FLAG_IV_STRIPPED)) | 
|  | return TXRX_CONTINUE; | 
|  |  | 
|  | hdrlen = ieee80211_get_hdrlen(rx->fc); | 
|  |  | 
|  | if (rx->skb->len < 8 + hdrlen) | 
|  | return TXRX_DROP; /* TODO: count this? */ | 
|  |  | 
|  | /* | 
|  | * no need to call ieee80211_wep_get_keyidx, | 
|  | * it verifies a bunch of things we've done already | 
|  | */ | 
|  | keyidx = rx->skb->data[hdrlen + 3] >> 6; | 
|  |  | 
|  | rx->key = rcu_dereference(rx->sdata->keys[keyidx]); | 
|  |  | 
|  | /* | 
|  | * RSNA-protected unicast frames should always be sent with | 
|  | * pairwise or station-to-station keys, but for WEP we allow | 
|  | * using a key index as well. | 
|  | */ | 
|  | if (rx->key && rx->key->conf.alg != ALG_WEP && | 
|  | !is_multicast_ether_addr(hdr->addr1)) | 
|  | rx->key = NULL; | 
|  | } | 
|  |  | 
|  | if (rx->key) { | 
|  | rx->key->tx_rx_count++; | 
|  | /* TODO: add threshold stuff again */ | 
|  | } else { | 
|  | #ifdef CONFIG_MAC80211_DEBUG | 
|  | if (net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: RX protected frame," | 
|  | " but have no key\n", rx->dev->name); | 
|  | #endif /* CONFIG_MAC80211_DEBUG */ | 
|  | return TXRX_DROP; | 
|  | } | 
|  |  | 
|  | /* Check for weak IVs if possible */ | 
|  | if (rx->sta && rx->key->conf.alg == ALG_WEP && | 
|  | ((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) && | 
|  | (!(rx->u.rx.status->flag & RX_FLAG_IV_STRIPPED) || | 
|  | !(rx->u.rx.status->flag & RX_FLAG_DECRYPTED)) && | 
|  | ieee80211_wep_is_weak_iv(rx->skb, rx->key)) | 
|  | rx->sta->wep_weak_iv_count++; | 
|  |  | 
|  | switch (rx->key->conf.alg) { | 
|  | case ALG_WEP: | 
|  | result = ieee80211_crypto_wep_decrypt(rx); | 
|  | break; | 
|  | case ALG_TKIP: | 
|  | result = ieee80211_crypto_tkip_decrypt(rx); | 
|  | break; | 
|  | case ALG_CCMP: | 
|  | result = ieee80211_crypto_ccmp_decrypt(rx); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* either the frame has been decrypted or will be dropped */ | 
|  | rx->u.rx.status->flag |= RX_FLAG_DECRYPTED; | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static void ap_sta_ps_start(struct net_device *dev, struct sta_info *sta) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | DECLARE_MAC_BUF(mac); | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev); | 
|  |  | 
|  | if (sdata->bss) | 
|  | atomic_inc(&sdata->bss->num_sta_ps); | 
|  | sta->flags |= WLAN_STA_PS; | 
|  | sta->pspoll = 0; | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | 
|  | printk(KERN_DEBUG "%s: STA %s aid %d enters power save mode\n", | 
|  | dev->name, print_mac(mac, sta->addr), sta->aid); | 
|  | #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | 
|  | } | 
|  |  | 
|  | static int ap_sta_ps_end(struct net_device *dev, struct sta_info *sta) | 
|  | { | 
|  | struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
|  | struct sk_buff *skb; | 
|  | int sent = 0; | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct ieee80211_tx_packet_data *pkt_data; | 
|  | DECLARE_MAC_BUF(mac); | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev); | 
|  | if (sdata->bss) | 
|  | atomic_dec(&sdata->bss->num_sta_ps); | 
|  | sta->flags &= ~(WLAN_STA_PS | WLAN_STA_TIM); | 
|  | sta->pspoll = 0; | 
|  | if (!skb_queue_empty(&sta->ps_tx_buf)) { | 
|  | if (local->ops->set_tim) | 
|  | local->ops->set_tim(local_to_hw(local), sta->aid, 0); | 
|  | if (sdata->bss) | 
|  | bss_tim_clear(local, sdata->bss, sta->aid); | 
|  | } | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | 
|  | printk(KERN_DEBUG "%s: STA %s aid %d exits power save mode\n", | 
|  | dev->name, print_mac(mac, sta->addr), sta->aid); | 
|  | #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | 
|  | /* Send all buffered frames to the station */ | 
|  | while ((skb = skb_dequeue(&sta->tx_filtered)) != NULL) { | 
|  | pkt_data = (struct ieee80211_tx_packet_data *) skb->cb; | 
|  | sent++; | 
|  | pkt_data->flags |= IEEE80211_TXPD_REQUEUE; | 
|  | dev_queue_xmit(skb); | 
|  | } | 
|  | while ((skb = skb_dequeue(&sta->ps_tx_buf)) != NULL) { | 
|  | pkt_data = (struct ieee80211_tx_packet_data *) skb->cb; | 
|  | local->total_ps_buffered--; | 
|  | sent++; | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | 
|  | printk(KERN_DEBUG "%s: STA %s aid %d send PS frame " | 
|  | "since STA not sleeping anymore\n", dev->name, | 
|  | print_mac(mac, sta->addr), sta->aid); | 
|  | #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | 
|  | pkt_data->flags |= IEEE80211_TXPD_REQUEUE; | 
|  | dev_queue_xmit(skb); | 
|  | } | 
|  |  | 
|  | return sent; | 
|  | } | 
|  |  | 
|  | static ieee80211_txrx_result | 
|  | ieee80211_rx_h_sta_process(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | struct sta_info *sta = rx->sta; | 
|  | struct net_device *dev = rx->dev; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) rx->skb->data; | 
|  |  | 
|  | if (!sta) | 
|  | return TXRX_CONTINUE; | 
|  |  | 
|  | /* Update last_rx only for IBSS packets which are for the current | 
|  | * BSSID to avoid keeping the current IBSS network alive in cases where | 
|  | * other STAs are using different BSSID. */ | 
|  | if (rx->sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { | 
|  | u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len, | 
|  | IEEE80211_IF_TYPE_IBSS); | 
|  | if (compare_ether_addr(bssid, rx->sdata->u.sta.bssid) == 0) | 
|  | sta->last_rx = jiffies; | 
|  | } else | 
|  | if (!is_multicast_ether_addr(hdr->addr1) || | 
|  | rx->sdata->vif.type == IEEE80211_IF_TYPE_STA) { | 
|  | /* Update last_rx only for unicast frames in order to prevent | 
|  | * the Probe Request frames (the only broadcast frames from a | 
|  | * STA in infrastructure mode) from keeping a connection alive. | 
|  | */ | 
|  | sta->last_rx = jiffies; | 
|  | } | 
|  |  | 
|  | if (!(rx->flags & IEEE80211_TXRXD_RXRA_MATCH)) | 
|  | return TXRX_CONTINUE; | 
|  |  | 
|  | sta->rx_fragments++; | 
|  | sta->rx_bytes += rx->skb->len; | 
|  | sta->last_rssi = rx->u.rx.status->ssi; | 
|  | sta->last_signal = rx->u.rx.status->signal; | 
|  | sta->last_noise = rx->u.rx.status->noise; | 
|  |  | 
|  | if (!(rx->fc & IEEE80211_FCTL_MOREFRAGS)) { | 
|  | /* Change STA power saving mode only in the end of a frame | 
|  | * exchange sequence */ | 
|  | if ((sta->flags & WLAN_STA_PS) && !(rx->fc & IEEE80211_FCTL_PM)) | 
|  | rx->u.rx.sent_ps_buffered += ap_sta_ps_end(dev, sta); | 
|  | else if (!(sta->flags & WLAN_STA_PS) && | 
|  | (rx->fc & IEEE80211_FCTL_PM)) | 
|  | ap_sta_ps_start(dev, sta); | 
|  | } | 
|  |  | 
|  | /* Drop data::nullfunc frames silently, since they are used only to | 
|  | * control station power saving mode. */ | 
|  | if ((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA && | 
|  | (rx->fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_NULLFUNC) { | 
|  | I802_DEBUG_INC(rx->local->rx_handlers_drop_nullfunc); | 
|  | /* Update counter and free packet here to avoid counting this | 
|  | * as a dropped packed. */ | 
|  | sta->rx_packets++; | 
|  | dev_kfree_skb(rx->skb); | 
|  | return TXRX_QUEUED; | 
|  | } | 
|  |  | 
|  | return TXRX_CONTINUE; | 
|  | } /* ieee80211_rx_h_sta_process */ | 
|  |  | 
|  | static inline struct ieee80211_fragment_entry * | 
|  | ieee80211_reassemble_add(struct ieee80211_sub_if_data *sdata, | 
|  | unsigned int frag, unsigned int seq, int rx_queue, | 
|  | struct sk_buff **skb) | 
|  | { | 
|  | struct ieee80211_fragment_entry *entry; | 
|  | int idx; | 
|  |  | 
|  | idx = sdata->fragment_next; | 
|  | entry = &sdata->fragments[sdata->fragment_next++]; | 
|  | if (sdata->fragment_next >= IEEE80211_FRAGMENT_MAX) | 
|  | sdata->fragment_next = 0; | 
|  |  | 
|  | if (!skb_queue_empty(&entry->skb_list)) { | 
|  | #ifdef CONFIG_MAC80211_DEBUG | 
|  | struct ieee80211_hdr *hdr = | 
|  | (struct ieee80211_hdr *) entry->skb_list.next->data; | 
|  | DECLARE_MAC_BUF(mac); | 
|  | DECLARE_MAC_BUF(mac2); | 
|  | printk(KERN_DEBUG "%s: RX reassembly removed oldest " | 
|  | "fragment entry (idx=%d age=%lu seq=%d last_frag=%d " | 
|  | "addr1=%s addr2=%s\n", | 
|  | sdata->dev->name, idx, | 
|  | jiffies - entry->first_frag_time, entry->seq, | 
|  | entry->last_frag, print_mac(mac, hdr->addr1), | 
|  | print_mac(mac2, hdr->addr2)); | 
|  | #endif /* CONFIG_MAC80211_DEBUG */ | 
|  | __skb_queue_purge(&entry->skb_list); | 
|  | } | 
|  |  | 
|  | __skb_queue_tail(&entry->skb_list, *skb); /* no need for locking */ | 
|  | *skb = NULL; | 
|  | entry->first_frag_time = jiffies; | 
|  | entry->seq = seq; | 
|  | entry->rx_queue = rx_queue; | 
|  | entry->last_frag = frag; | 
|  | entry->ccmp = 0; | 
|  | entry->extra_len = 0; | 
|  |  | 
|  | return entry; | 
|  | } | 
|  |  | 
|  | static inline struct ieee80211_fragment_entry * | 
|  | ieee80211_reassemble_find(struct ieee80211_sub_if_data *sdata, | 
|  | u16 fc, unsigned int frag, unsigned int seq, | 
|  | int rx_queue, struct ieee80211_hdr *hdr) | 
|  | { | 
|  | struct ieee80211_fragment_entry *entry; | 
|  | int i, idx; | 
|  |  | 
|  | idx = sdata->fragment_next; | 
|  | for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) { | 
|  | struct ieee80211_hdr *f_hdr; | 
|  | u16 f_fc; | 
|  |  | 
|  | idx--; | 
|  | if (idx < 0) | 
|  | idx = IEEE80211_FRAGMENT_MAX - 1; | 
|  |  | 
|  | entry = &sdata->fragments[idx]; | 
|  | if (skb_queue_empty(&entry->skb_list) || entry->seq != seq || | 
|  | entry->rx_queue != rx_queue || | 
|  | entry->last_frag + 1 != frag) | 
|  | continue; | 
|  |  | 
|  | f_hdr = (struct ieee80211_hdr *) entry->skb_list.next->data; | 
|  | f_fc = le16_to_cpu(f_hdr->frame_control); | 
|  |  | 
|  | if ((fc & IEEE80211_FCTL_FTYPE) != (f_fc & IEEE80211_FCTL_FTYPE) || | 
|  | compare_ether_addr(hdr->addr1, f_hdr->addr1) != 0 || | 
|  | compare_ether_addr(hdr->addr2, f_hdr->addr2) != 0) | 
|  | continue; | 
|  |  | 
|  | if (entry->first_frag_time + 2 * HZ < jiffies) { | 
|  | __skb_queue_purge(&entry->skb_list); | 
|  | continue; | 
|  | } | 
|  | return entry; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static ieee80211_txrx_result | 
|  | ieee80211_rx_h_defragment(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | struct ieee80211_hdr *hdr; | 
|  | u16 sc; | 
|  | unsigned int frag, seq; | 
|  | struct ieee80211_fragment_entry *entry; | 
|  | struct sk_buff *skb; | 
|  | DECLARE_MAC_BUF(mac); | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *) rx->skb->data; | 
|  | sc = le16_to_cpu(hdr->seq_ctrl); | 
|  | frag = sc & IEEE80211_SCTL_FRAG; | 
|  |  | 
|  | if (likely((!(rx->fc & IEEE80211_FCTL_MOREFRAGS) && frag == 0) || | 
|  | (rx->skb)->len < 24 || | 
|  | is_multicast_ether_addr(hdr->addr1))) { | 
|  | /* not fragmented */ | 
|  | goto out; | 
|  | } | 
|  | I802_DEBUG_INC(rx->local->rx_handlers_fragments); | 
|  |  | 
|  | seq = (sc & IEEE80211_SCTL_SEQ) >> 4; | 
|  |  | 
|  | if (frag == 0) { | 
|  | /* This is the first fragment of a new frame. */ | 
|  | entry = ieee80211_reassemble_add(rx->sdata, frag, seq, | 
|  | rx->u.rx.queue, &(rx->skb)); | 
|  | if (rx->key && rx->key->conf.alg == ALG_CCMP && | 
|  | (rx->fc & IEEE80211_FCTL_PROTECTED)) { | 
|  | /* Store CCMP PN so that we can verify that the next | 
|  | * fragment has a sequential PN value. */ | 
|  | entry->ccmp = 1; | 
|  | memcpy(entry->last_pn, | 
|  | rx->key->u.ccmp.rx_pn[rx->u.rx.queue], | 
|  | CCMP_PN_LEN); | 
|  | } | 
|  | return TXRX_QUEUED; | 
|  | } | 
|  |  | 
|  | /* This is a fragment for a frame that should already be pending in | 
|  | * fragment cache. Add this fragment to the end of the pending entry. | 
|  | */ | 
|  | entry = ieee80211_reassemble_find(rx->sdata, rx->fc, frag, seq, | 
|  | rx->u.rx.queue, hdr); | 
|  | if (!entry) { | 
|  | I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag); | 
|  | return TXRX_DROP; | 
|  | } | 
|  |  | 
|  | /* Verify that MPDUs within one MSDU have sequential PN values. | 
|  | * (IEEE 802.11i, 8.3.3.4.5) */ | 
|  | if (entry->ccmp) { | 
|  | int i; | 
|  | u8 pn[CCMP_PN_LEN], *rpn; | 
|  | if (!rx->key || rx->key->conf.alg != ALG_CCMP) | 
|  | return TXRX_DROP; | 
|  | memcpy(pn, entry->last_pn, CCMP_PN_LEN); | 
|  | for (i = CCMP_PN_LEN - 1; i >= 0; i--) { | 
|  | pn[i]++; | 
|  | if (pn[i]) | 
|  | break; | 
|  | } | 
|  | rpn = rx->key->u.ccmp.rx_pn[rx->u.rx.queue]; | 
|  | if (memcmp(pn, rpn, CCMP_PN_LEN) != 0) { | 
|  | if (net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: defrag: CCMP PN not " | 
|  | "sequential A2=%s" | 
|  | " PN=%02x%02x%02x%02x%02x%02x " | 
|  | "(expected %02x%02x%02x%02x%02x%02x)\n", | 
|  | rx->dev->name, print_mac(mac, hdr->addr2), | 
|  | rpn[0], rpn[1], rpn[2], rpn[3], rpn[4], | 
|  | rpn[5], pn[0], pn[1], pn[2], pn[3], | 
|  | pn[4], pn[5]); | 
|  | return TXRX_DROP; | 
|  | } | 
|  | memcpy(entry->last_pn, pn, CCMP_PN_LEN); | 
|  | } | 
|  |  | 
|  | skb_pull(rx->skb, ieee80211_get_hdrlen(rx->fc)); | 
|  | __skb_queue_tail(&entry->skb_list, rx->skb); | 
|  | entry->last_frag = frag; | 
|  | entry->extra_len += rx->skb->len; | 
|  | if (rx->fc & IEEE80211_FCTL_MOREFRAGS) { | 
|  | rx->skb = NULL; | 
|  | return TXRX_QUEUED; | 
|  | } | 
|  |  | 
|  | rx->skb = __skb_dequeue(&entry->skb_list); | 
|  | if (skb_tailroom(rx->skb) < entry->extra_len) { | 
|  | I802_DEBUG_INC(rx->local->rx_expand_skb_head2); | 
|  | if (unlikely(pskb_expand_head(rx->skb, 0, entry->extra_len, | 
|  | GFP_ATOMIC))) { | 
|  | I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag); | 
|  | __skb_queue_purge(&entry->skb_list); | 
|  | return TXRX_DROP; | 
|  | } | 
|  | } | 
|  | while ((skb = __skb_dequeue(&entry->skb_list))) { | 
|  | memcpy(skb_put(rx->skb, skb->len), skb->data, skb->len); | 
|  | dev_kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | /* Complete frame has been reassembled - process it now */ | 
|  | rx->flags |= IEEE80211_TXRXD_FRAGMENTED; | 
|  |  | 
|  | out: | 
|  | if (rx->sta) | 
|  | rx->sta->rx_packets++; | 
|  | if (is_multicast_ether_addr(hdr->addr1)) | 
|  | rx->local->dot11MulticastReceivedFrameCount++; | 
|  | else | 
|  | ieee80211_led_rx(rx->local); | 
|  | return TXRX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static ieee80211_txrx_result | 
|  | ieee80211_rx_h_ps_poll(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev); | 
|  | struct sk_buff *skb; | 
|  | int no_pending_pkts; | 
|  | DECLARE_MAC_BUF(mac); | 
|  |  | 
|  | if (likely(!rx->sta || | 
|  | (rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_CTL || | 
|  | (rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_PSPOLL || | 
|  | !(rx->flags & IEEE80211_TXRXD_RXRA_MATCH))) | 
|  | return TXRX_CONTINUE; | 
|  |  | 
|  | if ((sdata->vif.type != IEEE80211_IF_TYPE_AP) && | 
|  | (sdata->vif.type != IEEE80211_IF_TYPE_VLAN)) | 
|  | return TXRX_DROP; | 
|  |  | 
|  | skb = skb_dequeue(&rx->sta->tx_filtered); | 
|  | if (!skb) { | 
|  | skb = skb_dequeue(&rx->sta->ps_tx_buf); | 
|  | if (skb) | 
|  | rx->local->total_ps_buffered--; | 
|  | } | 
|  | no_pending_pkts = skb_queue_empty(&rx->sta->tx_filtered) && | 
|  | skb_queue_empty(&rx->sta->ps_tx_buf); | 
|  |  | 
|  | if (skb) { | 
|  | struct ieee80211_hdr *hdr = | 
|  | (struct ieee80211_hdr *) skb->data; | 
|  |  | 
|  | /* tell TX path to send one frame even though the STA may | 
|  | * still remain is PS mode after this frame exchange */ | 
|  | rx->sta->pspoll = 1; | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | 
|  | printk(KERN_DEBUG "STA %s aid %d: PS Poll (entries after %d)\n", | 
|  | print_mac(mac, rx->sta->addr), rx->sta->aid, | 
|  | skb_queue_len(&rx->sta->ps_tx_buf)); | 
|  | #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | 
|  |  | 
|  | /* Use MoreData flag to indicate whether there are more | 
|  | * buffered frames for this STA */ | 
|  | if (no_pending_pkts) { | 
|  | hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREDATA); | 
|  | rx->sta->flags &= ~WLAN_STA_TIM; | 
|  | } else | 
|  | hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA); | 
|  |  | 
|  | dev_queue_xmit(skb); | 
|  |  | 
|  | if (no_pending_pkts) { | 
|  | if (rx->local->ops->set_tim) | 
|  | rx->local->ops->set_tim(local_to_hw(rx->local), | 
|  | rx->sta->aid, 0); | 
|  | if (rx->sdata->bss) | 
|  | bss_tim_clear(rx->local, rx->sdata->bss, rx->sta->aid); | 
|  | } | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | 
|  | } else if (!rx->u.rx.sent_ps_buffered) { | 
|  | printk(KERN_DEBUG "%s: STA %s sent PS Poll even " | 
|  | "though there is no buffered frames for it\n", | 
|  | rx->dev->name, print_mac(mac, rx->sta->addr)); | 
|  | #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | 
|  |  | 
|  | } | 
|  |  | 
|  | /* Free PS Poll skb here instead of returning TXRX_DROP that would | 
|  | * count as an dropped frame. */ | 
|  | dev_kfree_skb(rx->skb); | 
|  |  | 
|  | return TXRX_QUEUED; | 
|  | } | 
|  |  | 
|  | static ieee80211_txrx_result | 
|  | ieee80211_rx_h_remove_qos_control(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | u16 fc = rx->fc; | 
|  | u8 *data = rx->skb->data; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) data; | 
|  |  | 
|  | if (!WLAN_FC_IS_QOS_DATA(fc)) | 
|  | return TXRX_CONTINUE; | 
|  |  | 
|  | /* remove the qos control field, update frame type and meta-data */ | 
|  | memmove(data + 2, data, ieee80211_get_hdrlen(fc) - 2); | 
|  | hdr = (struct ieee80211_hdr *) skb_pull(rx->skb, 2); | 
|  | /* change frame type to non QOS */ | 
|  | rx->fc = fc &= ~IEEE80211_STYPE_QOS_DATA; | 
|  | hdr->frame_control = cpu_to_le16(fc); | 
|  |  | 
|  | return TXRX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static int | 
|  | ieee80211_802_1x_port_control(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | if (unlikely(rx->sdata->ieee802_1x_pac && | 
|  | (!rx->sta || !(rx->sta->flags & WLAN_STA_AUTHORIZED)))) { | 
|  | #ifdef CONFIG_MAC80211_DEBUG | 
|  | printk(KERN_DEBUG "%s: dropped frame " | 
|  | "(unauthorized port)\n", rx->dev->name); | 
|  | #endif /* CONFIG_MAC80211_DEBUG */ | 
|  | return -EACCES; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | ieee80211_drop_unencrypted(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | /* | 
|  | * Pass through unencrypted frames if the hardware has | 
|  | * decrypted them already. | 
|  | */ | 
|  | if (rx->u.rx.status->flag & RX_FLAG_DECRYPTED) | 
|  | return 0; | 
|  |  | 
|  | /* Drop unencrypted frames if key is set. */ | 
|  | if (unlikely(!(rx->fc & IEEE80211_FCTL_PROTECTED) && | 
|  | (rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA && | 
|  | (rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_NULLFUNC && | 
|  | (rx->key || rx->sdata->drop_unencrypted))) { | 
|  | if (net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: RX non-WEP frame, but expected " | 
|  | "encryption\n", rx->dev->name); | 
|  | return -EACCES; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | ieee80211_data_to_8023(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | struct net_device *dev = rx->dev; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) rx->skb->data; | 
|  | u16 fc, hdrlen, ethertype; | 
|  | u8 *payload; | 
|  | u8 dst[ETH_ALEN]; | 
|  | u8 src[ETH_ALEN]; | 
|  | struct sk_buff *skb = rx->skb; | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | DECLARE_MAC_BUF(mac); | 
|  | DECLARE_MAC_BUF(mac2); | 
|  | DECLARE_MAC_BUF(mac3); | 
|  | DECLARE_MAC_BUF(mac4); | 
|  |  | 
|  | fc = rx->fc; | 
|  |  | 
|  | if (unlikely(!WLAN_FC_DATA_PRESENT(fc))) | 
|  | return -1; | 
|  |  | 
|  | hdrlen = ieee80211_get_hdrlen(fc); | 
|  |  | 
|  | /* convert IEEE 802.11 header + possible LLC headers into Ethernet | 
|  | * header | 
|  | * IEEE 802.11 address fields: | 
|  | * ToDS FromDS Addr1 Addr2 Addr3 Addr4 | 
|  | *   0     0   DA    SA    BSSID n/a | 
|  | *   0     1   DA    BSSID SA    n/a | 
|  | *   1     0   BSSID SA    DA    n/a | 
|  | *   1     1   RA    TA    DA    SA | 
|  | */ | 
|  |  | 
|  | switch (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) { | 
|  | case IEEE80211_FCTL_TODS: | 
|  | /* BSSID SA DA */ | 
|  | memcpy(dst, hdr->addr3, ETH_ALEN); | 
|  | memcpy(src, hdr->addr2, ETH_ALEN); | 
|  |  | 
|  | if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_AP && | 
|  | sdata->vif.type != IEEE80211_IF_TYPE_VLAN)) { | 
|  | if (net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: dropped ToDS frame " | 
|  | "(BSSID=%s SA=%s DA=%s)\n", | 
|  | dev->name, | 
|  | print_mac(mac, hdr->addr1), | 
|  | print_mac(mac2, hdr->addr2), | 
|  | print_mac(mac3, hdr->addr3)); | 
|  | return -1; | 
|  | } | 
|  | break; | 
|  | case (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS): | 
|  | /* RA TA DA SA */ | 
|  | memcpy(dst, hdr->addr3, ETH_ALEN); | 
|  | memcpy(src, hdr->addr4, ETH_ALEN); | 
|  |  | 
|  | if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_WDS)) { | 
|  | if (net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: dropped FromDS&ToDS " | 
|  | "frame (RA=%s TA=%s DA=%s SA=%s)\n", | 
|  | rx->dev->name, | 
|  | print_mac(mac, hdr->addr1), | 
|  | print_mac(mac2, hdr->addr2), | 
|  | print_mac(mac3, hdr->addr3), | 
|  | print_mac(mac4, hdr->addr4)); | 
|  | return -1; | 
|  | } | 
|  | break; | 
|  | case IEEE80211_FCTL_FROMDS: | 
|  | /* DA BSSID SA */ | 
|  | memcpy(dst, hdr->addr1, ETH_ALEN); | 
|  | memcpy(src, hdr->addr3, ETH_ALEN); | 
|  |  | 
|  | if (sdata->vif.type != IEEE80211_IF_TYPE_STA || | 
|  | (is_multicast_ether_addr(dst) && | 
|  | !compare_ether_addr(src, dev->dev_addr))) | 
|  | return -1; | 
|  | break; | 
|  | case 0: | 
|  | /* DA SA BSSID */ | 
|  | memcpy(dst, hdr->addr1, ETH_ALEN); | 
|  | memcpy(src, hdr->addr2, ETH_ALEN); | 
|  |  | 
|  | if (sdata->vif.type != IEEE80211_IF_TYPE_IBSS) { | 
|  | if (net_ratelimit()) { | 
|  | printk(KERN_DEBUG "%s: dropped IBSS frame " | 
|  | "(DA=%s SA=%s BSSID=%s)\n", | 
|  | dev->name, | 
|  | print_mac(mac, hdr->addr1), | 
|  | print_mac(mac2, hdr->addr2), | 
|  | print_mac(mac3, hdr->addr3)); | 
|  | } | 
|  | return -1; | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (unlikely(skb->len - hdrlen < 8)) { | 
|  | if (net_ratelimit()) { | 
|  | printk(KERN_DEBUG "%s: RX too short data frame " | 
|  | "payload\n", dev->name); | 
|  | } | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | payload = skb->data + hdrlen; | 
|  | ethertype = (payload[6] << 8) | payload[7]; | 
|  |  | 
|  | if (likely((compare_ether_addr(payload, rfc1042_header) == 0 && | 
|  | ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || | 
|  | compare_ether_addr(payload, bridge_tunnel_header) == 0)) { | 
|  | /* remove RFC1042 or Bridge-Tunnel encapsulation and | 
|  | * replace EtherType */ | 
|  | skb_pull(skb, hdrlen + 6); | 
|  | memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN); | 
|  | memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN); | 
|  | } else { | 
|  | struct ethhdr *ehdr; | 
|  | __be16 len; | 
|  |  | 
|  | skb_pull(skb, hdrlen); | 
|  | len = htons(skb->len); | 
|  | ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr)); | 
|  | memcpy(ehdr->h_dest, dst, ETH_ALEN); | 
|  | memcpy(ehdr->h_source, src, ETH_ALEN); | 
|  | ehdr->h_proto = len; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * requires that rx->skb is a frame with ethernet header | 
|  | */ | 
|  | static bool ieee80211_frame_allowed(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | static const u8 pae_group_addr[ETH_ALEN] | 
|  | = { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 }; | 
|  | struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data; | 
|  |  | 
|  | /* | 
|  | * Allow EAPOL frames to us/the PAE group address regardless | 
|  | * of whether the frame was encrypted or not. | 
|  | */ | 
|  | if (ehdr->h_proto == htons(ETH_P_PAE) && | 
|  | (compare_ether_addr(ehdr->h_dest, rx->dev->dev_addr) == 0 || | 
|  | compare_ether_addr(ehdr->h_dest, pae_group_addr) == 0)) | 
|  | return true; | 
|  |  | 
|  | if (ieee80211_802_1x_port_control(rx) || | 
|  | ieee80211_drop_unencrypted(rx)) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * requires that rx->skb is a frame with ethernet header | 
|  | */ | 
|  | static void | 
|  | ieee80211_deliver_skb(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | struct net_device *dev = rx->dev; | 
|  | struct ieee80211_local *local = rx->local; | 
|  | struct sk_buff *skb, *xmit_skb; | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data; | 
|  | struct sta_info *dsta; | 
|  |  | 
|  | skb = rx->skb; | 
|  | xmit_skb = NULL; | 
|  |  | 
|  | if (local->bridge_packets && (sdata->vif.type == IEEE80211_IF_TYPE_AP || | 
|  | sdata->vif.type == IEEE80211_IF_TYPE_VLAN) && | 
|  | (rx->flags & IEEE80211_TXRXD_RXRA_MATCH)) { | 
|  | if (is_multicast_ether_addr(ehdr->h_dest)) { | 
|  | /* | 
|  | * send multicast frames both to higher layers in | 
|  | * local net stack and back to the wireless medium | 
|  | */ | 
|  | xmit_skb = skb_copy(skb, GFP_ATOMIC); | 
|  | if (!xmit_skb && net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: failed to clone " | 
|  | "multicast frame\n", dev->name); | 
|  | } else { | 
|  | dsta = sta_info_get(local, skb->data); | 
|  | if (dsta && dsta->dev == dev) { | 
|  | /* | 
|  | * The destination station is associated to | 
|  | * this AP (in this VLAN), so send the frame | 
|  | * directly to it and do not pass it to local | 
|  | * net stack. | 
|  | */ | 
|  | xmit_skb = skb; | 
|  | skb = NULL; | 
|  | } | 
|  | if (dsta) | 
|  | sta_info_put(dsta); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (skb) { | 
|  | /* deliver to local stack */ | 
|  | skb->protocol = eth_type_trans(skb, dev); | 
|  | memset(skb->cb, 0, sizeof(skb->cb)); | 
|  | netif_rx(skb); | 
|  | } | 
|  |  | 
|  | if (xmit_skb) { | 
|  | /* send to wireless media */ | 
|  | xmit_skb->protocol = htons(ETH_P_802_3); | 
|  | skb_reset_network_header(xmit_skb); | 
|  | skb_reset_mac_header(xmit_skb); | 
|  | dev_queue_xmit(xmit_skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | static ieee80211_txrx_result | 
|  | ieee80211_rx_h_amsdu(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | struct net_device *dev = rx->dev; | 
|  | struct ieee80211_local *local = rx->local; | 
|  | u16 fc, ethertype; | 
|  | u8 *payload; | 
|  | struct sk_buff *skb = rx->skb, *frame = NULL; | 
|  | const struct ethhdr *eth; | 
|  | int remaining, err; | 
|  | u8 dst[ETH_ALEN]; | 
|  | u8 src[ETH_ALEN]; | 
|  | DECLARE_MAC_BUF(mac); | 
|  |  | 
|  | fc = rx->fc; | 
|  | if (unlikely((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA)) | 
|  | return TXRX_CONTINUE; | 
|  |  | 
|  | if (unlikely(!WLAN_FC_DATA_PRESENT(fc))) | 
|  | return TXRX_DROP; | 
|  |  | 
|  | if (!(rx->flags & IEEE80211_TXRXD_RX_AMSDU)) | 
|  | return TXRX_CONTINUE; | 
|  |  | 
|  | err = ieee80211_data_to_8023(rx); | 
|  | if (unlikely(err)) | 
|  | return TXRX_DROP; | 
|  |  | 
|  | skb->dev = dev; | 
|  |  | 
|  | dev->stats.rx_packets++; | 
|  | dev->stats.rx_bytes += skb->len; | 
|  |  | 
|  | /* skip the wrapping header */ | 
|  | eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr)); | 
|  | if (!eth) | 
|  | return TXRX_DROP; | 
|  |  | 
|  | while (skb != frame) { | 
|  | u8 padding; | 
|  | __be16 len = eth->h_proto; | 
|  | unsigned int subframe_len = sizeof(struct ethhdr) + ntohs(len); | 
|  |  | 
|  | remaining = skb->len; | 
|  | memcpy(dst, eth->h_dest, ETH_ALEN); | 
|  | memcpy(src, eth->h_source, ETH_ALEN); | 
|  |  | 
|  | padding = ((4 - subframe_len) & 0x3); | 
|  | /* the last MSDU has no padding */ | 
|  | if (subframe_len > remaining) { | 
|  | printk(KERN_DEBUG "%s: wrong buffer size", dev->name); | 
|  | return TXRX_DROP; | 
|  | } | 
|  |  | 
|  | skb_pull(skb, sizeof(struct ethhdr)); | 
|  | /* if last subframe reuse skb */ | 
|  | if (remaining <= subframe_len + padding) | 
|  | frame = skb; | 
|  | else { | 
|  | frame = dev_alloc_skb(local->hw.extra_tx_headroom + | 
|  | subframe_len); | 
|  |  | 
|  | if (frame == NULL) | 
|  | return TXRX_DROP; | 
|  |  | 
|  | skb_reserve(frame, local->hw.extra_tx_headroom + | 
|  | sizeof(struct ethhdr)); | 
|  | memcpy(skb_put(frame, ntohs(len)), skb->data, | 
|  | ntohs(len)); | 
|  |  | 
|  | eth = (struct ethhdr *) skb_pull(skb, ntohs(len) + | 
|  | padding); | 
|  | if (!eth) { | 
|  | printk(KERN_DEBUG "%s: wrong buffer size ", | 
|  | dev->name); | 
|  | dev_kfree_skb(frame); | 
|  | return TXRX_DROP; | 
|  | } | 
|  | } | 
|  |  | 
|  | skb_reset_network_header(frame); | 
|  | frame->dev = dev; | 
|  | frame->priority = skb->priority; | 
|  | rx->skb = frame; | 
|  |  | 
|  | payload = frame->data; | 
|  | ethertype = (payload[6] << 8) | payload[7]; | 
|  |  | 
|  | if (likely((compare_ether_addr(payload, rfc1042_header) == 0 && | 
|  | ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || | 
|  | compare_ether_addr(payload, | 
|  | bridge_tunnel_header) == 0)) { | 
|  | /* remove RFC1042 or Bridge-Tunnel | 
|  | * encapsulation and replace EtherType */ | 
|  | skb_pull(frame, 6); | 
|  | memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN); | 
|  | memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN); | 
|  | } else { | 
|  | memcpy(skb_push(frame, sizeof(__be16)), | 
|  | &len, sizeof(__be16)); | 
|  | memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN); | 
|  | memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN); | 
|  | } | 
|  |  | 
|  | if (!ieee80211_frame_allowed(rx)) { | 
|  | if (skb == frame) /* last frame */ | 
|  | return TXRX_DROP; | 
|  | dev_kfree_skb(frame); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | ieee80211_deliver_skb(rx); | 
|  | } | 
|  |  | 
|  | return TXRX_QUEUED; | 
|  | } | 
|  |  | 
|  | static ieee80211_txrx_result | 
|  | ieee80211_rx_h_data(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | struct net_device *dev = rx->dev; | 
|  | u16 fc; | 
|  | int err; | 
|  |  | 
|  | fc = rx->fc; | 
|  | if (unlikely((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA)) | 
|  | return TXRX_CONTINUE; | 
|  |  | 
|  | if (unlikely(!WLAN_FC_DATA_PRESENT(fc))) | 
|  | return TXRX_DROP; | 
|  |  | 
|  | err = ieee80211_data_to_8023(rx); | 
|  | if (unlikely(err)) | 
|  | return TXRX_DROP; | 
|  |  | 
|  | if (!ieee80211_frame_allowed(rx)) | 
|  | return TXRX_DROP; | 
|  |  | 
|  | rx->skb->dev = dev; | 
|  |  | 
|  | dev->stats.rx_packets++; | 
|  | dev->stats.rx_bytes += rx->skb->len; | 
|  |  | 
|  | ieee80211_deliver_skb(rx); | 
|  |  | 
|  | return TXRX_QUEUED; | 
|  | } | 
|  |  | 
|  | static ieee80211_txrx_result | 
|  | ieee80211_rx_h_ctrl(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | struct ieee80211_local *local = rx->local; | 
|  | struct ieee80211_hw *hw = &local->hw; | 
|  | struct sk_buff *skb = rx->skb; | 
|  | struct ieee80211_bar *bar = (struct ieee80211_bar *) skb->data; | 
|  | struct tid_ampdu_rx *tid_agg_rx; | 
|  | u16 start_seq_num; | 
|  | u16 tid; | 
|  |  | 
|  | if (likely((rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_CTL)) | 
|  | return TXRX_CONTINUE; | 
|  |  | 
|  | if ((rx->fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BACK_REQ) { | 
|  | if (!rx->sta) | 
|  | return TXRX_CONTINUE; | 
|  | tid = le16_to_cpu(bar->control) >> 12; | 
|  | tid_agg_rx = &(rx->sta->ampdu_mlme.tid_rx[tid]); | 
|  | if (tid_agg_rx->state != HT_AGG_STATE_OPERATIONAL) | 
|  | return TXRX_CONTINUE; | 
|  |  | 
|  | start_seq_num = le16_to_cpu(bar->start_seq_num) >> 4; | 
|  |  | 
|  | /* reset session timer */ | 
|  | if (tid_agg_rx->timeout) { | 
|  | unsigned long expires = | 
|  | jiffies + (tid_agg_rx->timeout / 1000) * HZ; | 
|  | mod_timer(&tid_agg_rx->session_timer, expires); | 
|  | } | 
|  |  | 
|  | /* manage reordering buffer according to requested */ | 
|  | /* sequence number */ | 
|  | rcu_read_lock(); | 
|  | ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL, | 
|  | start_seq_num, 1); | 
|  | rcu_read_unlock(); | 
|  | return TXRX_DROP; | 
|  | } | 
|  |  | 
|  | return TXRX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static ieee80211_txrx_result | 
|  | ieee80211_rx_h_mgmt(struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  |  | 
|  | if (!(rx->flags & IEEE80211_TXRXD_RXRA_MATCH)) | 
|  | return TXRX_DROP; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev); | 
|  | if ((sdata->vif.type == IEEE80211_IF_TYPE_STA || | 
|  | sdata->vif.type == IEEE80211_IF_TYPE_IBSS) && | 
|  | !(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME)) | 
|  | ieee80211_sta_rx_mgmt(rx->dev, rx->skb, rx->u.rx.status); | 
|  | else | 
|  | return TXRX_DROP; | 
|  |  | 
|  | return TXRX_QUEUED; | 
|  | } | 
|  |  | 
|  | static inline ieee80211_txrx_result __ieee80211_invoke_rx_handlers( | 
|  | struct ieee80211_local *local, | 
|  | ieee80211_rx_handler *handlers, | 
|  | struct ieee80211_txrx_data *rx, | 
|  | struct sta_info *sta) | 
|  | { | 
|  | ieee80211_rx_handler *handler; | 
|  | ieee80211_txrx_result res = TXRX_DROP; | 
|  |  | 
|  | for (handler = handlers; *handler != NULL; handler++) { | 
|  | res = (*handler)(rx); | 
|  |  | 
|  | switch (res) { | 
|  | case TXRX_CONTINUE: | 
|  | continue; | 
|  | case TXRX_DROP: | 
|  | I802_DEBUG_INC(local->rx_handlers_drop); | 
|  | if (sta) | 
|  | sta->rx_dropped++; | 
|  | break; | 
|  | case TXRX_QUEUED: | 
|  | I802_DEBUG_INC(local->rx_handlers_queued); | 
|  | break; | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (res == TXRX_DROP) | 
|  | dev_kfree_skb(rx->skb); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static inline void ieee80211_invoke_rx_handlers(struct ieee80211_local *local, | 
|  | ieee80211_rx_handler *handlers, | 
|  | struct ieee80211_txrx_data *rx, | 
|  | struct sta_info *sta) | 
|  | { | 
|  | if (__ieee80211_invoke_rx_handlers(local, handlers, rx, sta) == | 
|  | TXRX_CONTINUE) | 
|  | dev_kfree_skb(rx->skb); | 
|  | } | 
|  |  | 
|  | static void ieee80211_rx_michael_mic_report(struct net_device *dev, | 
|  | struct ieee80211_hdr *hdr, | 
|  | struct sta_info *sta, | 
|  | struct ieee80211_txrx_data *rx) | 
|  | { | 
|  | int keyidx, hdrlen; | 
|  | DECLARE_MAC_BUF(mac); | 
|  | DECLARE_MAC_BUF(mac2); | 
|  |  | 
|  | hdrlen = ieee80211_get_hdrlen_from_skb(rx->skb); | 
|  | if (rx->skb->len >= hdrlen + 4) | 
|  | keyidx = rx->skb->data[hdrlen + 3] >> 6; | 
|  | else | 
|  | keyidx = -1; | 
|  |  | 
|  | if (net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: TKIP hwaccel reported Michael MIC " | 
|  | "failure from %s to %s keyidx=%d\n", | 
|  | dev->name, print_mac(mac, hdr->addr2), | 
|  | print_mac(mac2, hdr->addr1), keyidx); | 
|  |  | 
|  | if (!sta) { | 
|  | /* | 
|  | * Some hardware seem to generate incorrect Michael MIC | 
|  | * reports; ignore them to avoid triggering countermeasures. | 
|  | */ | 
|  | if (net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: ignored spurious Michael MIC " | 
|  | "error for unknown address %s\n", | 
|  | dev->name, print_mac(mac, hdr->addr2)); | 
|  | goto ignore; | 
|  | } | 
|  |  | 
|  | if (!(rx->fc & IEEE80211_FCTL_PROTECTED)) { | 
|  | if (net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: ignored spurious Michael MIC " | 
|  | "error for a frame with no PROTECTED flag (src " | 
|  | "%s)\n", dev->name, print_mac(mac, hdr->addr2)); | 
|  | goto ignore; | 
|  | } | 
|  |  | 
|  | if (rx->sdata->vif.type == IEEE80211_IF_TYPE_AP && keyidx) { | 
|  | /* | 
|  | * APs with pairwise keys should never receive Michael MIC | 
|  | * errors for non-zero keyidx because these are reserved for | 
|  | * group keys and only the AP is sending real multicast | 
|  | * frames in the BSS. | 
|  | */ | 
|  | if (net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: ignored Michael MIC error for " | 
|  | "a frame with non-zero keyidx (%d)" | 
|  | " (src %s)\n", dev->name, keyidx, | 
|  | print_mac(mac, hdr->addr2)); | 
|  | goto ignore; | 
|  | } | 
|  |  | 
|  | if ((rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA && | 
|  | ((rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_MGMT || | 
|  | (rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_AUTH)) { | 
|  | if (net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: ignored spurious Michael MIC " | 
|  | "error for a frame that cannot be encrypted " | 
|  | "(fc=0x%04x) (src %s)\n", | 
|  | dev->name, rx->fc, print_mac(mac, hdr->addr2)); | 
|  | goto ignore; | 
|  | } | 
|  |  | 
|  | mac80211_ev_michael_mic_failure(rx->dev, keyidx, hdr); | 
|  | ignore: | 
|  | dev_kfree_skb(rx->skb); | 
|  | rx->skb = NULL; | 
|  | } | 
|  |  | 
|  | ieee80211_rx_handler ieee80211_rx_handlers[] = | 
|  | { | 
|  | ieee80211_rx_h_if_stats, | 
|  | ieee80211_rx_h_passive_scan, | 
|  | ieee80211_rx_h_check, | 
|  | ieee80211_rx_h_decrypt, | 
|  | ieee80211_rx_h_sta_process, | 
|  | ieee80211_rx_h_defragment, | 
|  | ieee80211_rx_h_ps_poll, | 
|  | ieee80211_rx_h_michael_mic_verify, | 
|  | /* this must be after decryption - so header is counted in MPDU mic | 
|  | * must be before pae and data, so QOS_DATA format frames | 
|  | * are not passed to user space by these functions | 
|  | */ | 
|  | ieee80211_rx_h_remove_qos_control, | 
|  | ieee80211_rx_h_amsdu, | 
|  | ieee80211_rx_h_data, | 
|  | ieee80211_rx_h_ctrl, | 
|  | ieee80211_rx_h_mgmt, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | /* main receive path */ | 
|  |  | 
|  | static int prepare_for_handlers(struct ieee80211_sub_if_data *sdata, | 
|  | u8 *bssid, struct ieee80211_txrx_data *rx, | 
|  | struct ieee80211_hdr *hdr) | 
|  | { | 
|  | int multicast = is_multicast_ether_addr(hdr->addr1); | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case IEEE80211_IF_TYPE_STA: | 
|  | if (!bssid) | 
|  | return 0; | 
|  | if (!ieee80211_bssid_match(bssid, sdata->u.sta.bssid)) { | 
|  | if (!(rx->flags & IEEE80211_TXRXD_RXIN_SCAN)) | 
|  | return 0; | 
|  | rx->flags &= ~IEEE80211_TXRXD_RXRA_MATCH; | 
|  | } else if (!multicast && | 
|  | compare_ether_addr(sdata->dev->dev_addr, | 
|  | hdr->addr1) != 0) { | 
|  | if (!(sdata->dev->flags & IFF_PROMISC)) | 
|  | return 0; | 
|  | rx->flags &= ~IEEE80211_TXRXD_RXRA_MATCH; | 
|  | } | 
|  | break; | 
|  | case IEEE80211_IF_TYPE_IBSS: | 
|  | if (!bssid) | 
|  | return 0; | 
|  | if (!ieee80211_bssid_match(bssid, sdata->u.sta.bssid)) { | 
|  | if (!(rx->flags & IEEE80211_TXRXD_RXIN_SCAN)) | 
|  | return 0; | 
|  | rx->flags &= ~IEEE80211_TXRXD_RXRA_MATCH; | 
|  | } else if (!multicast && | 
|  | compare_ether_addr(sdata->dev->dev_addr, | 
|  | hdr->addr1) != 0) { | 
|  | if (!(sdata->dev->flags & IFF_PROMISC)) | 
|  | return 0; | 
|  | rx->flags &= ~IEEE80211_TXRXD_RXRA_MATCH; | 
|  | } else if (!rx->sta) | 
|  | rx->sta = ieee80211_ibss_add_sta(sdata->dev, rx->skb, | 
|  | bssid, hdr->addr2); | 
|  | break; | 
|  | case IEEE80211_IF_TYPE_VLAN: | 
|  | case IEEE80211_IF_TYPE_AP: | 
|  | if (!bssid) { | 
|  | if (compare_ether_addr(sdata->dev->dev_addr, | 
|  | hdr->addr1)) | 
|  | return 0; | 
|  | } else if (!ieee80211_bssid_match(bssid, | 
|  | sdata->dev->dev_addr)) { | 
|  | if (!(rx->flags & IEEE80211_TXRXD_RXIN_SCAN)) | 
|  | return 0; | 
|  | rx->flags &= ~IEEE80211_TXRXD_RXRA_MATCH; | 
|  | } | 
|  | if (sdata->dev == sdata->local->mdev && | 
|  | !(rx->flags & IEEE80211_TXRXD_RXIN_SCAN)) | 
|  | /* do not receive anything via | 
|  | * master device when not scanning */ | 
|  | return 0; | 
|  | break; | 
|  | case IEEE80211_IF_TYPE_WDS: | 
|  | if (bssid || | 
|  | (rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) | 
|  | return 0; | 
|  | if (compare_ether_addr(sdata->u.wds.remote_addr, hdr->addr2)) | 
|  | return 0; | 
|  | break; | 
|  | case IEEE80211_IF_TYPE_MNTR: | 
|  | /* take everything */ | 
|  | break; | 
|  | case IEEE80211_IF_TYPE_INVALID: | 
|  | /* should never get here */ | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is the actual Rx frames handler. as it blongs to Rx path it must | 
|  | * be called with rcu_read_lock protection. | 
|  | */ | 
|  | static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw, | 
|  | struct sk_buff *skb, | 
|  | struct ieee80211_rx_status *status, | 
|  | u32 load) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct sta_info *sta; | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct ieee80211_txrx_data rx; | 
|  | u16 type; | 
|  | int prepares; | 
|  | struct ieee80211_sub_if_data *prev = NULL; | 
|  | struct sk_buff *skb_new; | 
|  | u8 *bssid; | 
|  | int hdrlen; | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *) skb->data; | 
|  | memset(&rx, 0, sizeof(rx)); | 
|  | rx.skb = skb; | 
|  | rx.local = local; | 
|  |  | 
|  | rx.u.rx.status = status; | 
|  | rx.u.rx.load = load; | 
|  | rx.fc = le16_to_cpu(hdr->frame_control); | 
|  | type = rx.fc & IEEE80211_FCTL_FTYPE; | 
|  |  | 
|  | /* | 
|  | * Drivers are required to align the payload data to a four-byte | 
|  | * boundary, so the last two bits of the address where it starts | 
|  | * may not be set. The header is required to be directly before | 
|  | * the payload data, padding like atheros hardware adds which is | 
|  | * inbetween the 802.11 header and the payload is not supported, | 
|  | * the driver is required to move the 802.11 header further back | 
|  | * in that case. | 
|  | */ | 
|  | hdrlen = ieee80211_get_hdrlen(rx.fc); | 
|  | WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3); | 
|  |  | 
|  | if (type == IEEE80211_FTYPE_DATA || type == IEEE80211_FTYPE_MGMT) | 
|  | local->dot11ReceivedFragmentCount++; | 
|  |  | 
|  | sta = rx.sta = sta_info_get(local, hdr->addr2); | 
|  | if (sta) { | 
|  | rx.dev = rx.sta->dev; | 
|  | rx.sdata = IEEE80211_DEV_TO_SUB_IF(rx.dev); | 
|  | } | 
|  |  | 
|  | if ((status->flag & RX_FLAG_MMIC_ERROR)) { | 
|  | ieee80211_rx_michael_mic_report(local->mdev, hdr, sta, &rx); | 
|  | goto end; | 
|  | } | 
|  |  | 
|  | if (unlikely(local->sta_sw_scanning || local->sta_hw_scanning)) | 
|  | rx.flags |= IEEE80211_TXRXD_RXIN_SCAN; | 
|  |  | 
|  | if (__ieee80211_invoke_rx_handlers(local, local->rx_pre_handlers, &rx, | 
|  | sta) != TXRX_CONTINUE) | 
|  | goto end; | 
|  | skb = rx.skb; | 
|  |  | 
|  | if (sta && !(sta->flags & (WLAN_STA_WDS | WLAN_STA_ASSOC_AP)) && | 
|  | !atomic_read(&local->iff_promiscs) && | 
|  | !is_multicast_ether_addr(hdr->addr1)) { | 
|  | rx.flags |= IEEE80211_TXRXD_RXRA_MATCH; | 
|  | ieee80211_invoke_rx_handlers(local, local->rx_handlers, &rx, | 
|  | rx.sta); | 
|  | sta_info_put(sta); | 
|  | return; | 
|  | } | 
|  |  | 
|  | list_for_each_entry_rcu(sdata, &local->interfaces, list) { | 
|  | if (!netif_running(sdata->dev)) | 
|  | continue; | 
|  |  | 
|  | if (sdata->vif.type == IEEE80211_IF_TYPE_MNTR) | 
|  | continue; | 
|  |  | 
|  | bssid = ieee80211_get_bssid(hdr, skb->len, sdata->vif.type); | 
|  | rx.flags |= IEEE80211_TXRXD_RXRA_MATCH; | 
|  | prepares = prepare_for_handlers(sdata, bssid, &rx, hdr); | 
|  | /* prepare_for_handlers can change sta */ | 
|  | sta = rx.sta; | 
|  |  | 
|  | if (!prepares) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * frame is destined for this interface, but if it's not | 
|  | * also for the previous one we handle that after the | 
|  | * loop to avoid copying the SKB once too much | 
|  | */ | 
|  |  | 
|  | if (!prev) { | 
|  | prev = sdata; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * frame was destined for the previous interface | 
|  | * so invoke RX handlers for it | 
|  | */ | 
|  |  | 
|  | skb_new = skb_copy(skb, GFP_ATOMIC); | 
|  | if (!skb_new) { | 
|  | if (net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: failed to copy " | 
|  | "multicast frame for %s", | 
|  | wiphy_name(local->hw.wiphy), | 
|  | prev->dev->name); | 
|  | continue; | 
|  | } | 
|  | rx.fc = le16_to_cpu(hdr->frame_control); | 
|  | rx.skb = skb_new; | 
|  | rx.dev = prev->dev; | 
|  | rx.sdata = prev; | 
|  | ieee80211_invoke_rx_handlers(local, local->rx_handlers, | 
|  | &rx, sta); | 
|  | prev = sdata; | 
|  | } | 
|  | if (prev) { | 
|  | rx.fc = le16_to_cpu(hdr->frame_control); | 
|  | rx.skb = skb; | 
|  | rx.dev = prev->dev; | 
|  | rx.sdata = prev; | 
|  | ieee80211_invoke_rx_handlers(local, local->rx_handlers, | 
|  | &rx, sta); | 
|  | } else | 
|  | dev_kfree_skb(skb); | 
|  |  | 
|  | end: | 
|  | if (sta) | 
|  | sta_info_put(sta); | 
|  | } | 
|  |  | 
|  | #define SEQ_MODULO 0x1000 | 
|  | #define SEQ_MASK   0xfff | 
|  |  | 
|  | static inline int seq_less(u16 sq1, u16 sq2) | 
|  | { | 
|  | return (((sq1 - sq2) & SEQ_MASK) > (SEQ_MODULO >> 1)); | 
|  | } | 
|  |  | 
|  | static inline u16 seq_inc(u16 sq) | 
|  | { | 
|  | return ((sq + 1) & SEQ_MASK); | 
|  | } | 
|  |  | 
|  | static inline u16 seq_sub(u16 sq1, u16 sq2) | 
|  | { | 
|  | return ((sq1 - sq2) & SEQ_MASK); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * As it function blongs to Rx path it must be called with | 
|  | * the proper rcu_read_lock protection for its flow. | 
|  | */ | 
|  | u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, | 
|  | struct tid_ampdu_rx *tid_agg_rx, | 
|  | struct sk_buff *skb, u16 mpdu_seq_num, | 
|  | int bar_req) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct ieee80211_rx_status status; | 
|  | u16 head_seq_num, buf_size; | 
|  | int index; | 
|  | u32 pkt_load; | 
|  |  | 
|  | buf_size = tid_agg_rx->buf_size; | 
|  | head_seq_num = tid_agg_rx->head_seq_num; | 
|  |  | 
|  | /* frame with out of date sequence number */ | 
|  | if (seq_less(mpdu_seq_num, head_seq_num)) { | 
|  | dev_kfree_skb(skb); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* if frame sequence number exceeds our buffering window size or | 
|  | * block Ack Request arrived - release stored frames */ | 
|  | if ((!seq_less(mpdu_seq_num, head_seq_num + buf_size)) || (bar_req)) { | 
|  | /* new head to the ordering buffer */ | 
|  | if (bar_req) | 
|  | head_seq_num = mpdu_seq_num; | 
|  | else | 
|  | head_seq_num = | 
|  | seq_inc(seq_sub(mpdu_seq_num, buf_size)); | 
|  | /* release stored frames up to new head to stack */ | 
|  | while (seq_less(tid_agg_rx->head_seq_num, head_seq_num)) { | 
|  | index = seq_sub(tid_agg_rx->head_seq_num, | 
|  | tid_agg_rx->ssn) | 
|  | % tid_agg_rx->buf_size; | 
|  |  | 
|  | if (tid_agg_rx->reorder_buf[index]) { | 
|  | /* release the reordered frames to stack */ | 
|  | memcpy(&status, | 
|  | tid_agg_rx->reorder_buf[index]->cb, | 
|  | sizeof(status)); | 
|  | pkt_load = ieee80211_rx_load_stats(local, | 
|  | tid_agg_rx->reorder_buf[index], | 
|  | &status); | 
|  | __ieee80211_rx_handle_packet(hw, | 
|  | tid_agg_rx->reorder_buf[index], | 
|  | &status, pkt_load); | 
|  | tid_agg_rx->stored_mpdu_num--; | 
|  | tid_agg_rx->reorder_buf[index] = NULL; | 
|  | } | 
|  | tid_agg_rx->head_seq_num = | 
|  | seq_inc(tid_agg_rx->head_seq_num); | 
|  | } | 
|  | if (bar_req) | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* now the new frame is always in the range of the reordering */ | 
|  | /* buffer window */ | 
|  | index = seq_sub(mpdu_seq_num, tid_agg_rx->ssn) | 
|  | % tid_agg_rx->buf_size; | 
|  | /* check if we already stored this frame */ | 
|  | if (tid_agg_rx->reorder_buf[index]) { | 
|  | dev_kfree_skb(skb); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* if arrived mpdu is in the right order and nothing else stored */ | 
|  | /* release it immediately */ | 
|  | if (mpdu_seq_num == tid_agg_rx->head_seq_num && | 
|  | tid_agg_rx->stored_mpdu_num == 0) { | 
|  | tid_agg_rx->head_seq_num = | 
|  | seq_inc(tid_agg_rx->head_seq_num); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* put the frame in the reordering buffer */ | 
|  | tid_agg_rx->reorder_buf[index] = skb; | 
|  | tid_agg_rx->stored_mpdu_num++; | 
|  | /* release the buffer until next missing frame */ | 
|  | index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) | 
|  | % tid_agg_rx->buf_size; | 
|  | while (tid_agg_rx->reorder_buf[index]) { | 
|  | /* release the reordered frame back to stack */ | 
|  | memcpy(&status, tid_agg_rx->reorder_buf[index]->cb, | 
|  | sizeof(status)); | 
|  | pkt_load = ieee80211_rx_load_stats(local, | 
|  | tid_agg_rx->reorder_buf[index], | 
|  | &status); | 
|  | __ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index], | 
|  | &status, pkt_load); | 
|  | tid_agg_rx->stored_mpdu_num--; | 
|  | tid_agg_rx->reorder_buf[index] = NULL; | 
|  | tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num); | 
|  | index =	seq_sub(tid_agg_rx->head_seq_num, | 
|  | tid_agg_rx->ssn) % tid_agg_rx->buf_size; | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_hw *hw = &local->hw; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
|  | struct sta_info *sta; | 
|  | struct tid_ampdu_rx *tid_agg_rx; | 
|  | u16 fc, sc; | 
|  | u16 mpdu_seq_num; | 
|  | u8 ret = 0, *qc; | 
|  | int tid; | 
|  |  | 
|  | sta = sta_info_get(local, hdr->addr2); | 
|  | if (!sta) | 
|  | return ret; | 
|  |  | 
|  | fc = le16_to_cpu(hdr->frame_control); | 
|  |  | 
|  | /* filter the QoS data rx stream according to | 
|  | * STA/TID and check if this STA/TID is on aggregation */ | 
|  | if (!WLAN_FC_IS_QOS_DATA(fc)) | 
|  | goto end_reorder; | 
|  |  | 
|  | qc = skb->data + ieee80211_get_hdrlen(fc) - QOS_CONTROL_LEN; | 
|  | tid = qc[0] & QOS_CONTROL_TID_MASK; | 
|  | tid_agg_rx = &(sta->ampdu_mlme.tid_rx[tid]); | 
|  |  | 
|  | if (tid_agg_rx->state != HT_AGG_STATE_OPERATIONAL) | 
|  | goto end_reorder; | 
|  |  | 
|  | /* null data frames are excluded */ | 
|  | if (unlikely(fc & IEEE80211_STYPE_QOS_NULLFUNC)) | 
|  | goto end_reorder; | 
|  |  | 
|  | /* new un-ordered ampdu frame - process it */ | 
|  |  | 
|  | /* reset session timer */ | 
|  | if (tid_agg_rx->timeout) { | 
|  | unsigned long expires = | 
|  | jiffies + (tid_agg_rx->timeout / 1000) * HZ; | 
|  | mod_timer(&tid_agg_rx->session_timer, expires); | 
|  | } | 
|  |  | 
|  | /* if this mpdu is fragmented - terminate rx aggregation session */ | 
|  | sc = le16_to_cpu(hdr->seq_ctrl); | 
|  | if (sc & IEEE80211_SCTL_FRAG) { | 
|  | ieee80211_sta_stop_rx_ba_session(sta->dev, sta->addr, | 
|  | tid, 0, WLAN_REASON_QSTA_REQUIRE_SETUP); | 
|  | ret = 1; | 
|  | goto end_reorder; | 
|  | } | 
|  |  | 
|  | /* according to mpdu sequence number deal with reordering buffer */ | 
|  | mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4; | 
|  | ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, | 
|  | mpdu_seq_num, 0); | 
|  | end_reorder: | 
|  | if (sta) | 
|  | sta_info_put(sta); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is the receive path handler. It is called by a low level driver when an | 
|  | * 802.11 MPDU is received from the hardware. | 
|  | */ | 
|  | void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, | 
|  | struct ieee80211_rx_status *status) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | u32 pkt_load; | 
|  |  | 
|  | /* | 
|  | * key references and virtual interfaces are protected using RCU | 
|  | * and this requires that we are in a read-side RCU section during | 
|  | * receive processing | 
|  | */ | 
|  | rcu_read_lock(); | 
|  |  | 
|  | /* | 
|  | * Frames with failed FCS/PLCP checksum are not returned, | 
|  | * all other frames are returned without radiotap header | 
|  | * if it was previously present. | 
|  | * Also, frames with less than 16 bytes are dropped. | 
|  | */ | 
|  | skb = ieee80211_rx_monitor(local, skb, status); | 
|  | if (!skb) { | 
|  | rcu_read_unlock(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | pkt_load = ieee80211_rx_load_stats(local, skb, status); | 
|  | local->channel_use_raw += pkt_load; | 
|  |  | 
|  | if (!ieee80211_rx_reorder_ampdu(local, skb)) | 
|  | __ieee80211_rx_handle_packet(hw, skb, status, pkt_load); | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | } | 
|  | EXPORT_SYMBOL(__ieee80211_rx); | 
|  |  | 
|  | /* This is a version of the rx handler that can be called from hard irq | 
|  | * context. Post the skb on the queue and schedule the tasklet */ | 
|  | void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb, | 
|  | struct ieee80211_rx_status *status) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  |  | 
|  | BUILD_BUG_ON(sizeof(struct ieee80211_rx_status) > sizeof(skb->cb)); | 
|  |  | 
|  | skb->dev = local->mdev; | 
|  | /* copy status into skb->cb for use by tasklet */ | 
|  | memcpy(skb->cb, status, sizeof(*status)); | 
|  | skb->pkt_type = IEEE80211_RX_MSG; | 
|  | skb_queue_tail(&local->skb_queue, skb); | 
|  | tasklet_schedule(&local->tasklet); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_rx_irqsafe); |