| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org> |
| * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl> |
| * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl> |
| */ |
| |
| #ifndef MT76X0U_H |
| #define MT76X0U_H |
| |
| #include <linux/bitfield.h> |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/mutex.h> |
| #include <linux/usb.h> |
| #include <linux/completion.h> |
| #include <net/mac80211.h> |
| #include <linux/debugfs.h> |
| |
| #include "../mt76x02.h" |
| #include "eeprom.h" |
| |
| #define MT7610E_FIRMWARE "mediatek/mt7610e.bin" |
| #define MT7650E_FIRMWARE "mediatek/mt7650e.bin" |
| |
| #define MT7610U_FIRMWARE "mediatek/mt7610u.bin" |
| |
| #define MT_USB_AGGR_SIZE_LIMIT 21 /* * 1024B */ |
| #define MT_USB_AGGR_TIMEOUT 0x80 /* * 33ns */ |
| |
| static inline bool is_mt7610e(struct mt76x02_dev *dev) |
| { |
| if (!mt76_is_mmio(&dev->mt76)) |
| return false; |
| |
| return mt76_chip(&dev->mt76) == 0x7610; |
| } |
| |
| static inline bool is_mt7630(struct mt76x02_dev *dev) |
| { |
| return mt76_chip(&dev->mt76) == 0x7630; |
| } |
| |
| /* Init */ |
| int mt76x0_init_hardware(struct mt76x02_dev *dev); |
| int mt76x0_register_device(struct mt76x02_dev *dev); |
| void mt76x0_chip_onoff(struct mt76x02_dev *dev, bool enable, bool reset); |
| |
| void mt76x0_mac_stop(struct mt76x02_dev *dev); |
| |
| int mt76x0_config(struct ieee80211_hw *hw, u32 changed); |
| |
| /* PHY */ |
| void mt76x0_phy_init(struct mt76x02_dev *dev); |
| int mt76x0_phy_wait_bbp_ready(struct mt76x02_dev *dev); |
| void mt76x0_phy_set_channel(struct mt76x02_dev *dev, |
| struct cfg80211_chan_def *chandef); |
| void mt76x0_phy_set_txpower(struct mt76x02_dev *dev); |
| void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on); |
| #endif |
