| /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ |
| /* |
| * Copyright (C) 2012-2014, 2018, 2020-2023 Intel Corporation |
| * Copyright (C) 2013-2015 Intel Mobile Communications GmbH |
| * Copyright (C) 2016-2017 Intel Deutschland GmbH |
| */ |
| #ifndef __iwl_fw_api_phy_ctxt_h__ |
| #define __iwl_fw_api_phy_ctxt_h__ |
| |
| /* Supported bands */ |
| #define PHY_BAND_5 (0) |
| #define PHY_BAND_24 (1) |
| #define PHY_BAND_6 (2) |
| |
| /* Supported channel width, vary if there is VHT support */ |
| #define IWL_PHY_CHANNEL_MODE20 0x0 |
| #define IWL_PHY_CHANNEL_MODE40 0x1 |
| #define IWL_PHY_CHANNEL_MODE80 0x2 |
| #define IWL_PHY_CHANNEL_MODE160 0x3 |
| /* and 320 MHz for EHT */ |
| #define IWL_PHY_CHANNEL_MODE320 0x4 |
| |
| /* |
| * Control channel position: |
| * For legacy set bit means upper channel, otherwise lower. |
| * For VHT - bit-2 marks if the control is lower/upper relative to center-freq |
| * bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0. |
| * For EHT - bit-3 is used for extended distance |
| * center_freq |
| * | |
| * 40Mhz |____|____| |
| * 80Mhz |____|____|____|____| |
| * 160Mhz |____|____|____|____|____|____|____|____| |
| * 320MHz |____|____|____|____|____|____|____|____|____|____|____|____|____|____|____|____| |
| * code 1011 1010 1001 1000 0011 0010 0001 0000 0100 0101 0110 0111 1100 1101 1110 1111 |
| */ |
| #define IWL_PHY_CTRL_POS_ABOVE 0x4 |
| #define IWL_PHY_CTRL_POS_OFFS_EXT 0x8 |
| #define IWL_PHY_CTRL_POS_OFFS_MSK 0x3 |
| |
| /* |
| * struct iwl_fw_channel_info_v1 - channel information |
| * |
| * @band: PHY_BAND_* |
| * @channel: channel number |
| * @width: PHY_[VHT|LEGACY]_CHANNEL_* |
| * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_* |
| */ |
| struct iwl_fw_channel_info_v1 { |
| u8 band; |
| u8 channel; |
| u8 width; |
| u8 ctrl_pos; |
| } __packed; /* CHANNEL_CONFIG_API_S_VER_1 */ |
| |
| /* |
| * struct iwl_fw_channel_info - channel information |
| * |
| * @channel: channel number |
| * @band: PHY_BAND_* |
| * @width: PHY_[VHT|LEGACY]_CHANNEL_* |
| * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_* |
| * @reserved: for future use and alignment |
| */ |
| struct iwl_fw_channel_info { |
| __le32 channel; |
| u8 band; |
| u8 width; |
| u8 ctrl_pos; |
| u8 reserved; |
| } __packed; /*CHANNEL_CONFIG_API_S_VER_2 */ |
| |
| #define PHY_RX_CHAIN_DRIVER_FORCE_POS (0) |
| #define PHY_RX_CHAIN_DRIVER_FORCE_MSK \ |
| (0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS) |
| #define PHY_RX_CHAIN_VALID_POS (1) |
| #define PHY_RX_CHAIN_VALID_MSK \ |
| (0x7 << PHY_RX_CHAIN_VALID_POS) |
| #define PHY_RX_CHAIN_FORCE_SEL_POS (4) |
| #define PHY_RX_CHAIN_FORCE_SEL_MSK \ |
| (0x7 << PHY_RX_CHAIN_FORCE_SEL_POS) |
| #define PHY_RX_CHAIN_FORCE_MIMO_SEL_POS (7) |
| #define PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \ |
| (0x7 << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS) |
| #define PHY_RX_CHAIN_CNT_POS (10) |
| #define PHY_RX_CHAIN_CNT_MSK \ |
| (0x3 << PHY_RX_CHAIN_CNT_POS) |
| #define PHY_RX_CHAIN_MIMO_CNT_POS (12) |
| #define PHY_RX_CHAIN_MIMO_CNT_MSK \ |
| (0x3 << PHY_RX_CHAIN_MIMO_CNT_POS) |
| #define PHY_RX_CHAIN_MIMO_FORCE_POS (14) |
| #define PHY_RX_CHAIN_MIMO_FORCE_MSK \ |
| (0x1 << PHY_RX_CHAIN_MIMO_FORCE_POS) |
| |
| /* TODO: fix the value, make it depend on firmware at runtime? */ |
| #define NUM_PHY_CTX 3 |
| |
| /* TODO: complete missing documentation */ |
| /** |
| * struct iwl_phy_context_cmd_tail - tail of iwl_phy_ctx_cmd for alignment with |
| * various channel structures. |
| * |
| * @txchain_info: ??? |
| * @rxchain_info: ??? |
| * @acquisition_data: ??? |
| * @dsp_cfg_flags: set to 0 |
| */ |
| struct iwl_phy_context_cmd_tail { |
| __le32 txchain_info; |
| __le32 rxchain_info; |
| __le32 acquisition_data; |
| __le32 dsp_cfg_flags; |
| } __packed; |
| |
| /** |
| * struct iwl_phy_context_cmd - config of the PHY context |
| * ( PHY_CONTEXT_CMD = 0x8 ) |
| * @id_and_color: ID and color of the relevant Binding |
| * @action: action to perform, see &enum iwl_ctxt_action |
| * @apply_time: 0 means immediate apply and context switch. |
| * other value means apply new params after X usecs |
| * @tx_param_color: ??? |
| * @ci: channel info |
| * @tail: command tail |
| */ |
| struct iwl_phy_context_cmd_v1 { |
| /* COMMON_INDEX_HDR_API_S_VER_1 */ |
| __le32 id_and_color; |
| __le32 action; |
| /* PHY_CONTEXT_DATA_API_S_VER_3 */ |
| __le32 apply_time; |
| __le32 tx_param_color; |
| struct iwl_fw_channel_info ci; |
| struct iwl_phy_context_cmd_tail tail; |
| } __packed; /* PHY_CONTEXT_CMD_API_VER_1 */ |
| |
| /** |
| * struct iwl_phy_context_cmd - config of the PHY context |
| * ( PHY_CONTEXT_CMD = 0x8 ) |
| * @id_and_color: ID and color of the relevant Binding |
| * @action: action to perform, see &enum iwl_ctxt_action |
| * @lmac_id: the lmac id the phy context belongs to |
| * @ci: channel info |
| * @rxchain_info: ??? |
| * @sbb_bandwidth: 0 disabled, 1 - 40Mhz ... 4 - 320MHz |
| * @sbb_ctrl_channel_loc: location of the control channel |
| * @dsp_cfg_flags: set to 0 |
| * @reserved: reserved to align to 64 bit |
| */ |
| struct iwl_phy_context_cmd { |
| /* COMMON_INDEX_HDR_API_S_VER_1 */ |
| __le32 id_and_color; |
| __le32 action; |
| /* PHY_CONTEXT_DATA_API_S_VER_3, PHY_CONTEXT_DATA_API_S_VER_4 */ |
| struct iwl_fw_channel_info ci; |
| __le32 lmac_id; |
| union { |
| __le32 rxchain_info; /* reserved in _VER_4 */ |
| struct { /* used for _VER_5/_VER_6 */ |
| u8 sbb_bandwidth; |
| u8 sbb_ctrl_channel_loc; |
| __le16 puncture_mask; /* added in VER_6 */ |
| }; |
| }; |
| __le32 dsp_cfg_flags; |
| __le32 reserved; |
| } __packed; /* PHY_CONTEXT_CMD_API_VER_3, |
| * PHY_CONTEXT_CMD_API_VER_4, |
| * PHY_CONTEXT_CMD_API_VER_5, |
| * PHY_CONTEXT_CMD_API_VER_6 |
| */ |
| |
| #endif /* __iwl_fw_api_phy_ctxt_h__ */ |