drivers/media/i2c/bt819.c - third_party/linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  *  bt819 - BT819A VideoStream Decoder (Rockwell Part)
  *
  * Copyright (C) 1999 Mike Bernson <mike@mlb.org>
  * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
  *
  * Modifications for LML33/DC10plus unified driver
  * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
  *
  * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
  *    - moved over to linux>=2.4.x i2c protocol (9/9/2002)
  *
  * This code was modify/ported from the saa7111 driver written
  * by Dave Perks.
  */

 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/ioctl.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <linux/slab.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ctrls.h>
 #include <media/i2c/bt819.h>

 MODULE_DESCRIPTION("Brooktree-819 video decoder driver");
 MODULE_AUTHOR("Mike Bernson & Dave Perks");
 MODULE_LICENSE("GPL");

 static int debug;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0-1)");


 /* ----------------------------------------------------------------------- */

 struct bt819 {
 	struct v4l2_subdev sd;
 	struct v4l2_ctrl_handler hdl;
 	unsigned char reg[32];

 	v4l2_std_id norm;
 	int input;
 	int enable;
 };

 static inline struct bt819 *to_bt819(struct v4l2_subdev *sd)
 {
 	return container_of(sd, struct bt819, sd);
 }

 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
 {
 	return &container_of(ctrl->handler, struct bt819, hdl)->sd;
 }

 struct timing {
 	int hactive;
 	int hdelay;
 	int vactive;
 	int vdelay;
 	int hscale;
 	int vscale;
 };

 /* for values, see the bt819 datasheet */
 static struct timing timing_data[] = {
 	{864 - 24, 20, 625 - 2, 1, 0x0504, 0x0000},
 	{858 - 24, 20, 525 - 2, 1, 0x00f8, 0x0000},
 };

 /* ----------------------------------------------------------------------- */

 static inline int bt819_write(struct bt819 *decoder, u8 reg, u8 value)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd);

 	decoder->reg[reg] = value;
 	return i2c_smbus_write_byte_data(client, reg, value);
 }

 static inline int bt819_setbit(struct bt819 *decoder, u8 reg, u8 bit, u8 value)
 {
 	return bt819_write(decoder, reg,
 		(decoder->reg[reg] & ~(1 << bit)) | (value ? (1 << bit) : 0));
 }

 static int bt819_write_block(struct bt819 *decoder, const u8 *data, unsigned int len)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd);
 	int ret = -1;
 	u8 reg;

 	/* the bt819 has an autoincrement function, use it if
 	 * the adapter understands raw I2C */
 	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 		/* do raw I2C, not smbus compatible */
 		u8 block_data[32];
 		int block_len;

 		while (len >= 2) {
 			block_len = 0;
 			block_data[block_len++] = reg = data[0];
 			do {
 				block_data[block_len++] =
 				    decoder->reg[reg++] = data[1];
 				len -= 2;
 				data += 2;
 			} while (len >= 2 && data[0] == reg && block_len < 32);
 			ret = i2c_master_send(client, block_data, block_len);
 			if (ret < 0)
 				break;
 		}
 	} else {
 		/* do some slow I2C emulation kind of thing */
 		while (len >= 2) {
 			reg = *data++;
 			ret = bt819_write(decoder, reg, *data++);
 			if (ret < 0)
 				break;
 			len -= 2;
 		}
 	}

 	return ret;
 }

 static inline int bt819_read(struct bt819 *decoder, u8 reg)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd);

 	return i2c_smbus_read_byte_data(client, reg);
 }

 static int bt819_init(struct v4l2_subdev *sd)
 {
 	static unsigned char init[] = {
 		/*0x1f, 0x00,*/     /* Reset */
 		0x01, 0x59,	/* 0x01 input format */
 		0x02, 0x00,	/* 0x02 temporal decimation */
 		0x03, 0x12,	/* 0x03 Cropping msb */
 		0x04, 0x16,	/* 0x04 Vertical Delay, lsb */
 		0x05, 0xe0,	/* 0x05 Vertical Active lsb */
 		0x06, 0x80,	/* 0x06 Horizontal Delay lsb */
 		0x07, 0xd0,	/* 0x07 Horizontal Active lsb */
 		0x08, 0x00,	/* 0x08 Horizontal Scaling msb */
 		0x09, 0xf8,	/* 0x09 Horizontal Scaling lsb */
 		0x0a, 0x00,	/* 0x0a Brightness control */
 		0x0b, 0x30,	/* 0x0b Miscellaneous control */
 		0x0c, 0xd8,	/* 0x0c Luma Gain lsb */
 		0x0d, 0xfe,	/* 0x0d Chroma Gain (U) lsb */
 		0x0e, 0xb4,	/* 0x0e Chroma Gain (V) msb */
 		0x0f, 0x00,	/* 0x0f Hue control */
 		0x12, 0x04,	/* 0x12 Output Format */
 		0x13, 0x20,	/* 0x13 Vertical Scaling msb 0x00
 					   chroma comb OFF, line drop scaling, interlace scaling
 					   BUG? Why does turning the chroma comb on fuck up color?
 					   Bug in the bt819 stepping on my board?
 					*/
 		0x14, 0x00,	/* 0x14 Vertical Scaling lsb */
 		0x16, 0x07,	/* 0x16 Video Timing Polarity
 					   ACTIVE=active low
 					   FIELD: high=odd,
 					   vreset=active high,
 					   hreset=active high */
 		0x18, 0x68,	/* 0x18 AGC Delay */
 		0x19, 0x5d,	/* 0x19 Burst Gate Delay */
 		0x1a, 0x80,	/* 0x1a ADC Interface */
 	};

 	struct bt819 *decoder = to_bt819(sd);
 	struct timing *timing = &timing_data[(decoder->norm & V4L2_STD_525_60) ? 1 : 0];

 	init[0x03 * 2 - 1] =
 	    (((timing->vdelay >> 8) & 0x03) << 6) |
 	    (((timing->vactive >> 8) & 0x03) << 4) |
 	    (((timing->hdelay >> 8) & 0x03) << 2) |
 	    ((timing->hactive >> 8) & 0x03);
 	init[0x04 * 2 - 1] = timing->vdelay & 0xff;
 	init[0x05 * 2 - 1] = timing->vactive & 0xff;
 	init[0x06 * 2 - 1] = timing->hdelay & 0xff;
 	init[0x07 * 2 - 1] = timing->hactive & 0xff;
 	init[0x08 * 2 - 1] = timing->hscale >> 8;
 	init[0x09 * 2 - 1] = timing->hscale & 0xff;
 	/* 0x15 in array is address 0x19 */
 	init[0x15 * 2 - 1] = (decoder->norm & V4L2_STD_625_50) ? 115 : 93;	/* Chroma burst delay */
 	/* reset */
 	bt819_write(decoder, 0x1f, 0x00);
 	mdelay(1);

 	/* init */
 	return bt819_write_block(decoder, init, sizeof(init));
 }

 /* ----------------------------------------------------------------------- */

 static int bt819_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd)
 {
 	struct bt819 *decoder = to_bt819(sd);
 	int status = bt819_read(decoder, 0x00);
 	int res = V4L2_IN_ST_NO_SIGNAL;
 	v4l2_std_id std = pstd ? *pstd : V4L2_STD_ALL;

 	if ((status & 0x80))
 		res = 0;
 	else
 		std = V4L2_STD_UNKNOWN;

 	if ((status & 0x10))
 		std &= V4L2_STD_PAL;
 	else
 		std &= V4L2_STD_NTSC;
 	if (pstd)
 		*pstd = std;
 	if (pstatus)
 		*pstatus = res;

 	v4l2_dbg(1, debug, sd, "get status %x\n", status);
 	return 0;
 }

 static int bt819_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
 {
 	return bt819_status(sd, NULL, std);
 }

 static int bt819_g_input_status(struct v4l2_subdev *sd, u32 *status)
 {
 	return bt819_status(sd, status, NULL);
 }

 static int bt819_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 {
 	struct bt819 *decoder = to_bt819(sd);
 	struct timing *timing = NULL;

 	v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std);

 	if (sd->v4l2_dev == NULL || sd->v4l2_dev->notify == NULL)
 		v4l2_err(sd, "no notify found!\n");

 	if (std & V4L2_STD_NTSC) {
 		v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
 		bt819_setbit(decoder, 0x01, 0, 1);
 		bt819_setbit(decoder, 0x01, 1, 0);
 		bt819_setbit(decoder, 0x01, 5, 0);
 		bt819_write(decoder, 0x18, 0x68);
 		bt819_write(decoder, 0x19, 0x5d);
 		/* bt819_setbit(decoder, 0x1a,  5, 1); */
 		timing = &timing_data[1];
 	} else if (std & V4L2_STD_PAL) {
 		v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
 		bt819_setbit(decoder, 0x01, 0, 1);
 		bt819_setbit(decoder, 0x01, 1, 1);
 		bt819_setbit(decoder, 0x01, 5, 1);
 		bt819_write(decoder, 0x18, 0x7f);
 		bt819_write(decoder, 0x19, 0x72);
 		/* bt819_setbit(decoder, 0x1a,  5, 0); */
 		timing = &timing_data[0];
 	} else {
 		v4l2_dbg(1, debug, sd, "unsupported norm %llx\n",
 				(unsigned long long)std);
 		return -EINVAL;
 	}
 	bt819_write(decoder, 0x03,
 			(((timing->vdelay >> 8) & 0x03) << 6) |
 			(((timing->vactive >> 8) & 0x03) << 4) |
 			(((timing->hdelay >> 8) & 0x03) << 2) |
 			((timing->hactive >> 8) & 0x03));
 	bt819_write(decoder, 0x04, timing->vdelay & 0xff);
 	bt819_write(decoder, 0x05, timing->vactive & 0xff);
 	bt819_write(decoder, 0x06, timing->hdelay & 0xff);
 	bt819_write(decoder, 0x07, timing->hactive & 0xff);
 	bt819_write(decoder, 0x08, (timing->hscale >> 8) & 0xff);
 	bt819_write(decoder, 0x09, timing->hscale & 0xff);
 	decoder->norm = std;
 	v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL);
 	return 0;
 }

 static int bt819_s_routing(struct v4l2_subdev *sd,
 			   u32 input, u32 output, u32 config)
 {
 	struct bt819 *decoder = to_bt819(sd);

 	v4l2_dbg(1, debug, sd, "set input %x\n", input);

 	if (input > 7)
 		return -EINVAL;

 	if (sd->v4l2_dev == NULL || sd->v4l2_dev->notify == NULL)
 		v4l2_err(sd, "no notify found!\n");

 	if (decoder->input != input) {
 		v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
 		decoder->input = input;
 		/* select mode */
 		if (decoder->input == 0) {
 			bt819_setbit(decoder, 0x0b, 6, 0);
 			bt819_setbit(decoder, 0x1a, 1, 1);
 		} else {
 			bt819_setbit(decoder, 0x0b, 6, 1);
 			bt819_setbit(decoder, 0x1a, 1, 0);
 		}
 		v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL);
 	}
 	return 0;
 }

 static int bt819_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct bt819 *decoder = to_bt819(sd);

 	v4l2_dbg(1, debug, sd, "enable output %x\n", enable);

 	if (decoder->enable != enable) {
 		decoder->enable = enable;
 		bt819_setbit(decoder, 0x16, 7, !enable);
 	}
 	return 0;
 }

 static int bt819_s_ctrl(struct v4l2_ctrl *ctrl)
 {
 	struct v4l2_subdev *sd = to_sd(ctrl);
 	struct bt819 *decoder = to_bt819(sd);
 	int temp;

 	switch (ctrl->id) {
 	case V4L2_CID_BRIGHTNESS:
 		bt819_write(decoder, 0x0a, ctrl->val);
 		break;

 	case V4L2_CID_CONTRAST:
 		bt819_write(decoder, 0x0c, ctrl->val & 0xff);
 		bt819_setbit(decoder, 0x0b, 2, ((ctrl->val >> 8) & 0x01));
 		break;

 	case V4L2_CID_SATURATION:
 		bt819_write(decoder, 0x0d, (ctrl->val >> 7) & 0xff);
 		bt819_setbit(decoder, 0x0b, 1, ((ctrl->val >> 15) & 0x01));

 		/* Ratio between U gain and V gain must stay the same as
 		   the ratio between the default U and V gain values. */
 		temp = (ctrl->val * 180) / 254;
 		bt819_write(decoder, 0x0e, (temp >> 7) & 0xff);
 		bt819_setbit(decoder, 0x0b, 0, (temp >> 15) & 0x01);
 		break;

 	case V4L2_CID_HUE:
 		bt819_write(decoder, 0x0f, ctrl->val);
 		break;

 	default:
 		return -EINVAL;
 	}
 	return 0;
 }

 /* ----------------------------------------------------------------------- */

 static const struct v4l2_ctrl_ops bt819_ctrl_ops = {
 	.s_ctrl = bt819_s_ctrl,
 };

 static const struct v4l2_subdev_video_ops bt819_video_ops = {
 	.s_std = bt819_s_std,
 	.s_routing = bt819_s_routing,
 	.s_stream = bt819_s_stream,
 	.querystd = bt819_querystd,
 	.g_input_status = bt819_g_input_status,
 };

 static const struct v4l2_subdev_ops bt819_ops = {
 	.video = &bt819_video_ops,
 };

 /* ----------------------------------------------------------------------- */

 static int bt819_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	int i, ver;
 	struct bt819 *decoder;
 	struct v4l2_subdev *sd;
 	const char *name;

 	/* Check if the adapter supports the needed features */
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;

 	decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL);
 	if (decoder == NULL)
 		return -ENOMEM;
 	sd = &decoder->sd;
 	v4l2_i2c_subdev_init(sd, client, &bt819_ops);

 	ver = bt819_read(decoder, 0x17);
 	switch (ver & 0xf0) {
 	case 0x70:
 		name = "bt819a";
 		break;
 	case 0x60:
 		name = "bt817a";
 		break;
 	case 0x20:
 		name = "bt815a";
 		break;
 	default:
 		v4l2_dbg(1, debug, sd,
 			"unknown chip version 0x%02x\n", ver);
 		return -ENODEV;
 	}

 	v4l_info(client, "%s found @ 0x%x (%s)\n", name,
 			client->addr << 1, client->adapter->name);

 	decoder->norm = V4L2_STD_NTSC;
 	decoder->input = 0;
 	decoder->enable = 1;

 	i = bt819_init(sd);
 	if (i < 0)
 		v4l2_dbg(1, debug, sd, "init status %d\n", i);

 	v4l2_ctrl_handler_init(&decoder->hdl, 4);
 	v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops,
 			V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
 	v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops,
 			V4L2_CID_CONTRAST, 0, 511, 1, 0xd8);
 	v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops,
 			V4L2_CID_SATURATION, 0, 511, 1, 0xfe);
 	v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops,
 			V4L2_CID_HUE, -128, 127, 1, 0);
 	sd->ctrl_handler = &decoder->hdl;
 	if (decoder->hdl.error) {
 		int err = decoder->hdl.error;

 		v4l2_ctrl_handler_free(&decoder->hdl);
 		return err;
 	}
 	v4l2_ctrl_handler_setup(&decoder->hdl);
 	return 0;
 }

 static int bt819_remove(struct i2c_client *client)
 {
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct bt819 *decoder = to_bt819(sd);

 	v4l2_device_unregister_subdev(sd);
 	v4l2_ctrl_handler_free(&decoder->hdl);
 	return 0;
 }

 /* ----------------------------------------------------------------------- */

 static const struct i2c_device_id bt819_id[] = {
 	{ "bt819a", 0 },
 	{ "bt817a", 0 },
 	{ "bt815a", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, bt819_id);

 static struct i2c_driver bt819_driver = {
 	.driver = {
 		.name	= "bt819",
 	},
 	.probe		= bt819_probe,
 	.remove		= bt819_remove,
 	.id_table	= bt819_id,
 };

 module_i2c_driver(bt819_driver);
	// SPDX-License-Identifier: GPL-2.0-or-later
	/*
	* bt819 - BT819A VideoStream Decoder (Rockwell Part)
	*
	* Copyright (C) 1999 Mike Bernson <mike@mlb.org>
	* Copyright (C) 1998 Dave Perks <dperks@ibm.net>
	*
	* Modifications for LML33/DC10plus unified driver
	* Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
	*
	* Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
	* - moved over to linux>=2.4.x i2c protocol (9/9/2002)
	*
	* This code was modify/ported from the saa7111 driver written
	* by Dave Perks.
	*/

	#include <linux/module.h>
	#include <linux/types.h>
	#include <linux/ioctl.h>
	#include <linux/delay.h>
	#include <linux/i2c.h>
	#include <linux/videodev2.h>
	#include <linux/slab.h>
	#include <media/v4l2-device.h>
	#include <media/v4l2-ctrls.h>
	#include <media/i2c/bt819.h>

	MODULE_DESCRIPTION("Brooktree-819 video decoder driver");
	MODULE_AUTHOR("Mike Bernson & Dave Perks");
	MODULE_LICENSE("GPL");

	static int debug;
	module_param(debug, int, 0);
	MODULE_PARM_DESC(debug, "Debug level (0-1)");


	/* ----------------------------------------------------------------------- */

	struct bt819 {
	struct v4l2_subdev sd;
	struct v4l2_ctrl_handler hdl;
	unsigned char reg[32];

	v4l2_std_id norm;
	int input;
	int enable;
	};

	static inline struct bt819 to_bt819(struct v4l2_subdev sd)
	{
	return container_of(sd, struct bt819, sd);
	}

	static inline struct v4l2_subdev to_sd(struct v4l2_ctrl ctrl)
	{
	return &container_of(ctrl->handler, struct bt819, hdl)->sd;
	}

	struct timing {
	int hactive;
	int hdelay;
	int vactive;
	int vdelay;
	int hscale;
	int vscale;
	};

	/* for values, see the bt819 datasheet */
	static struct timing timing_data[] = {
	{864 - 24, 20, 625 - 2, 1, 0x0504, 0x0000},
	{858 - 24, 20, 525 - 2, 1, 0x00f8, 0x0000},
	};

	/* ----------------------------------------------------------------------- */

	static inline int bt819_write(struct bt819 *decoder, u8 reg, u8 value)
	{
	struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd);

	decoder->reg[reg] = value;
	return i2c_smbus_write_byte_data(client, reg, value);
	}

	static inline int bt819_setbit(struct bt819 *decoder, u8 reg, u8 bit, u8 value)
	{
	return bt819_write(decoder, reg,
	(decoder->reg[reg] & ~(1 << bit)) \| (value ? (1 << bit) : 0));
	}

	static int bt819_write_block(struct bt819 decoder, const u8 data, unsigned int len)
	{
	struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd);
	int ret = -1;
	u8 reg;

	/* the bt819 has an autoincrement function, use it if
	* the adapter understands raw I2C */
	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
	/* do raw I2C, not smbus compatible */
	u8 block_data[32];
	int block_len;

	while (len >= 2) {
	block_len = 0;
	block_data[block_len++] = reg = data[0];
	do {
	block_data[block_len++] =
	decoder->reg[reg++] = data[1];
	len -= 2;
	data += 2;
	} while (len >= 2 && data[0] == reg && block_len < 32);
	ret = i2c_master_send(client, block_data, block_len);
	if (ret < 0)
	break;
	}
	} else {
	/* do some slow I2C emulation kind of thing */
	while (len >= 2) {
	reg = *data++;
	ret = bt819_write(decoder, reg, *data++);
	if (ret < 0)
	break;
	len -= 2;
	}
	}

	return ret;
	}

	static inline int bt819_read(struct bt819 *decoder, u8 reg)
	{
	struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd);

	return i2c_smbus_read_byte_data(client, reg);
	}

	static int bt819_init(struct v4l2_subdev *sd)
	{
	static unsigned char init[] = {
	/0x1f, 0x00,/ /* Reset */
	0x01, 0x59, /* 0x01 input format */
	0x02, 0x00, /* 0x02 temporal decimation */
	0x03, 0x12, /* 0x03 Cropping msb */
	0x04, 0x16, /* 0x04 Vertical Delay, lsb */
	0x05, 0xe0, /* 0x05 Vertical Active lsb */
	0x06, 0x80, /* 0x06 Horizontal Delay lsb */
	0x07, 0xd0, /* 0x07 Horizontal Active lsb */
	0x08, 0x00, /* 0x08 Horizontal Scaling msb */
	0x09, 0xf8, /* 0x09 Horizontal Scaling lsb */
	0x0a, 0x00, /* 0x0a Brightness control */
	0x0b, 0x30, /* 0x0b Miscellaneous control */
	0x0c, 0xd8, /* 0x0c Luma Gain lsb */
	0x0d, 0xfe, /* 0x0d Chroma Gain (U) lsb */
	0x0e, 0xb4, /* 0x0e Chroma Gain (V) msb */
	0x0f, 0x00, /* 0x0f Hue control */
	0x12, 0x04, /* 0x12 Output Format */
	0x13, 0x20, /* 0x13 Vertical Scaling msb 0x00
	chroma comb OFF, line drop scaling, interlace scaling
	BUG? Why does turning the chroma comb on fuck up color?
	Bug in the bt819 stepping on my board?
	*/
	0x14, 0x00, /* 0x14 Vertical Scaling lsb */
	0x16, 0x07, /* 0x16 Video Timing Polarity
	ACTIVE=active low
	FIELD: high=odd,
	vreset=active high,
	hreset=active high */
	0x18, 0x68, /* 0x18 AGC Delay */
	0x19, 0x5d, /* 0x19 Burst Gate Delay */
	0x1a, 0x80, /* 0x1a ADC Interface */
	};

	struct bt819 *decoder = to_bt819(sd);
	struct timing *timing = &timing_data[(decoder->norm & V4L2_STD_525_60) ? 1 : 0];

	init[0x03 * 2 - 1] =
	(((timing->vdelay >> 8) & 0x03) << 6) \|
	(((timing->vactive >> 8) & 0x03) << 4) \|
	(((timing->hdelay >> 8) & 0x03) << 2) \|
	((timing->hactive >> 8) & 0x03);
	init[0x04 * 2 - 1] = timing->vdelay & 0xff;
	init[0x05 * 2 - 1] = timing->vactive & 0xff;
	init[0x06 * 2 - 1] = timing->hdelay & 0xff;
	init[0x07 * 2 - 1] = timing->hactive & 0xff;
	init[0x08 * 2 - 1] = timing->hscale >> 8;
	init[0x09 * 2 - 1] = timing->hscale & 0xff;
	/* 0x15 in array is address 0x19 */
	init[0x15 * 2 - 1] = (decoder->norm & V4L2_STD_625_50) ? 115 : 93; /* Chroma burst delay */
	/* reset */
	bt819_write(decoder, 0x1f, 0x00);
	mdelay(1);

	/* init */
	return bt819_write_block(decoder, init, sizeof(init));
	}

	/* ----------------------------------------------------------------------- */

	static int bt819_status(struct v4l2_subdev sd, u32 pstatus, v4l2_std_id *pstd)
	{
	struct bt819 *decoder = to_bt819(sd);
	int status = bt819_read(decoder, 0x00);
	int res = V4L2_IN_ST_NO_SIGNAL;
	v4l2_std_id std = pstd ? *pstd : V4L2_STD_ALL;

	if ((status & 0x80))
	res = 0;
	else
	std = V4L2_STD_UNKNOWN;

	if ((status & 0x10))
	std &= V4L2_STD_PAL;
	else
	std &= V4L2_STD_NTSC;
	if (pstd)
	*pstd = std;
	if (pstatus)
	*pstatus = res;

	v4l2_dbg(1, debug, sd, "get status %x\n", status);
	return 0;
	}

	static int bt819_querystd(struct v4l2_subdev sd, v4l2_std_id std)
	{
	return bt819_status(sd, NULL, std);
	}

	static int bt819_g_input_status(struct v4l2_subdev sd, u32 status)
	{
	return bt819_status(sd, status, NULL);
	}

	static int bt819_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
	{
	struct bt819 *decoder = to_bt819(sd);
	struct timing *timing = NULL;

	v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std);

	if (sd->v4l2_dev == NULL \|\| sd->v4l2_dev->notify == NULL)
	v4l2_err(sd, "no notify found!\n");

	if (std & V4L2_STD_NTSC) {
	v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
	bt819_setbit(decoder, 0x01, 0, 1);
	bt819_setbit(decoder, 0x01, 1, 0);
	bt819_setbit(decoder, 0x01, 5, 0);
	bt819_write(decoder, 0x18, 0x68);
	bt819_write(decoder, 0x19, 0x5d);
	/* bt819_setbit(decoder, 0x1a, 5, 1); */
	timing = &timing_data[1];
	} else if (std & V4L2_STD_PAL) {
	v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
	bt819_setbit(decoder, 0x01, 0, 1);
	bt819_setbit(decoder, 0x01, 1, 1);
	bt819_setbit(decoder, 0x01, 5, 1);
	bt819_write(decoder, 0x18, 0x7f);
	bt819_write(decoder, 0x19, 0x72);
	/* bt819_setbit(decoder, 0x1a, 5, 0); */
	timing = &timing_data[0];
	} else {
	v4l2_dbg(1, debug, sd, "unsupported norm %llx\n",
	(unsigned long long)std);
	return -EINVAL;
	}
	bt819_write(decoder, 0x03,
	(((timing->vdelay >> 8) & 0x03) << 6) \|
	(((timing->vactive >> 8) & 0x03) << 4) \|
	(((timing->hdelay >> 8) & 0x03) << 2) \|
	((timing->hactive >> 8) & 0x03));
	bt819_write(decoder, 0x04, timing->vdelay & 0xff);
	bt819_write(decoder, 0x05, timing->vactive & 0xff);
	bt819_write(decoder, 0x06, timing->hdelay & 0xff);
	bt819_write(decoder, 0x07, timing->hactive & 0xff);
	bt819_write(decoder, 0x08, (timing->hscale >> 8) & 0xff);
	bt819_write(decoder, 0x09, timing->hscale & 0xff);
	decoder->norm = std;
	v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL);
	return 0;
	}

	static int bt819_s_routing(struct v4l2_subdev *sd,
	u32 input, u32 output, u32 config)
	{
	struct bt819 *decoder = to_bt819(sd);

	v4l2_dbg(1, debug, sd, "set input %x\n", input);

	if (input > 7)
	return -EINVAL;

	if (sd->v4l2_dev == NULL \|\| sd->v4l2_dev->notify == NULL)
	v4l2_err(sd, "no notify found!\n");

	if (decoder->input != input) {
	v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
	decoder->input = input;
	/* select mode */
	if (decoder->input == 0) {
	bt819_setbit(decoder, 0x0b, 6, 0);
	bt819_setbit(decoder, 0x1a, 1, 1);
	} else {
	bt819_setbit(decoder, 0x0b, 6, 1);
	bt819_setbit(decoder, 0x1a, 1, 0);
	}
	v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL);
	}
	return 0;
	}

	static int bt819_s_stream(struct v4l2_subdev *sd, int enable)
	{
	struct bt819 *decoder = to_bt819(sd);

	v4l2_dbg(1, debug, sd, "enable output %x\n", enable);

	if (decoder->enable != enable) {
	decoder->enable = enable;
	bt819_setbit(decoder, 0x16, 7, !enable);
	}
	return 0;
	}

	static int bt819_s_ctrl(struct v4l2_ctrl *ctrl)
	{
	struct v4l2_subdev *sd = to_sd(ctrl);
	struct bt819 *decoder = to_bt819(sd);
	int temp;

	switch (ctrl->id) {
	case V4L2_CID_BRIGHTNESS:
	bt819_write(decoder, 0x0a, ctrl->val);
	break;

	case V4L2_CID_CONTRAST:
	bt819_write(decoder, 0x0c, ctrl->val & 0xff);
	bt819_setbit(decoder, 0x0b, 2, ((ctrl->val >> 8) & 0x01));
	break;

	case V4L2_CID_SATURATION:
	bt819_write(decoder, 0x0d, (ctrl->val >> 7) & 0xff);
	bt819_setbit(decoder, 0x0b, 1, ((ctrl->val >> 15) & 0x01));

	/* Ratio between U gain and V gain must stay the same as
	the ratio between the default U and V gain values. */
	temp = (ctrl->val * 180) / 254;
	bt819_write(decoder, 0x0e, (temp >> 7) & 0xff);
	bt819_setbit(decoder, 0x0b, 0, (temp >> 15) & 0x01);
	break;

	case V4L2_CID_HUE:
	bt819_write(decoder, 0x0f, ctrl->val);
	break;

	default:
	return -EINVAL;
	}
	return 0;
	}

	/* ----------------------------------------------------------------------- */

	static const struct v4l2_ctrl_ops bt819_ctrl_ops = {
	.s_ctrl = bt819_s_ctrl,
	};

	static const struct v4l2_subdev_video_ops bt819_video_ops = {
	.s_std = bt819_s_std,
	.s_routing = bt819_s_routing,
	.s_stream = bt819_s_stream,
	.querystd = bt819_querystd,
	.g_input_status = bt819_g_input_status,
	};

	static const struct v4l2_subdev_ops bt819_ops = {
	.video = &bt819_video_ops,
	};

	/* ----------------------------------------------------------------------- */

	static int bt819_probe(struct i2c_client *client,
	const struct i2c_device_id *id)
	{
	int i, ver;
	struct bt819 *decoder;
	struct v4l2_subdev *sd;
	const char *name;

	/* Check if the adapter supports the needed features */
	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
	return -ENODEV;

	decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL);
	if (decoder == NULL)
	return -ENOMEM;
	sd = &decoder->sd;
	v4l2_i2c_subdev_init(sd, client, &bt819_ops);

	ver = bt819_read(decoder, 0x17);
	switch (ver & 0xf0) {
	case 0x70:
	name = "bt819a";
	break;
	case 0x60:
	name = "bt817a";
	break;
	case 0x20:
	name = "bt815a";
	break;
	default:
	v4l2_dbg(1, debug, sd,
	"unknown chip version 0x%02x\n", ver);
	return -ENODEV;
	}

	v4l_info(client, "%s found @ 0x%x (%s)\n", name,
	client->addr << 1, client->adapter->name);

	decoder->norm = V4L2_STD_NTSC;
	decoder->input = 0;
	decoder->enable = 1;

	i = bt819_init(sd);
	if (i < 0)
	v4l2_dbg(1, debug, sd, "init status %d\n", i);

	v4l2_ctrl_handler_init(&decoder->hdl, 4);
	v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops,
	V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
	v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops,
	V4L2_CID_CONTRAST, 0, 511, 1, 0xd8);
	v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops,
	V4L2_CID_SATURATION, 0, 511, 1, 0xfe);
	v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops,
	V4L2_CID_HUE, -128, 127, 1, 0);
	sd->ctrl_handler = &decoder->hdl;
	if (decoder->hdl.error) {
	int err = decoder->hdl.error;

	v4l2_ctrl_handler_free(&decoder->hdl);
	return err;
	}
	v4l2_ctrl_handler_setup(&decoder->hdl);
	return 0;
	}

	static int bt819_remove(struct i2c_client *client)
	{
	struct v4l2_subdev *sd = i2c_get_clientdata(client);
	struct bt819 *decoder = to_bt819(sd);

	v4l2_device_unregister_subdev(sd);
	v4l2_ctrl_handler_free(&decoder->hdl);
	return 0;
	}

	/* ----------------------------------------------------------------------- */

	static const struct i2c_device_id bt819_id[] = {
	{ "bt819a", 0 },
	{ "bt817a", 0 },
	{ "bt815a", 0 },
	{ }
	};
	MODULE_DEVICE_TABLE(i2c, bt819_id);

	static struct i2c_driver bt819_driver = {
	.driver = {
	.name = "bt819",
	},
	.probe = bt819_probe,
	.remove = bt819_remove,
	.id_table = bt819_id,
	};

	module_i2c_driver(bt819_driver);