blob: a654a9b4b77c072e3ab06a82264c6b1c3eed1714 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* TSC frequency enumeration via MSR
*
* Copyright (C) 2013, 2018 Intel Corporation
* Author: Bin Gao <bin.gao@intel.com>
*/
#include <linux/kernel.h>
#include <asm/apic.h>
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
#include <asm/msr.h>
#include <asm/param.h>
#include <asm/tsc.h>
#define MAX_NUM_FREQS 16 /* 4 bits to select the frequency */
/*
* The frequency numbers in the SDM are e.g. 83.3 MHz, which does not contain a
* lot of accuracy which leads to clock drift. As far as we know Bay Trail SoCs
* use a 25 MHz crystal and Cherry Trail uses a 19.2 MHz crystal, the crystal
* is the source clk for a root PLL which outputs 1600 and 100 MHz. It is
* unclear if the root PLL outputs are used directly by the CPU clock PLL or
* if there is another PLL in between.
* This does not matter though, we can model the chain of PLLs as a single PLL
* with a quotient equal to the quotients of all PLLs in the chain multiplied.
* So we can create a simplified model of the CPU clock setup using a reference
* clock of 100 MHz plus a quotient which gets us as close to the frequency
* from the SDM as possible.
* For the 83.3 MHz example from above this would give us 100 MHz * 5 / 6 =
* 83 and 1/3 MHz, which matches exactly what has been measured on actual hw.
*/
#define TSC_REFERENCE_KHZ 100000
struct muldiv {
u32 multiplier;
u32 divider;
};
/*
* If MSR_PERF_STAT[31] is set, the maximum resolved bus ratio can be
* read in MSR_PLATFORM_ID[12:8], otherwise in MSR_PERF_STAT[44:40].
* Unfortunately some Intel Atom SoCs aren't quite compliant to this,
* so we need manually differentiate SoC families. This is what the
* field use_msr_plat does.
*/
struct freq_desc {
bool use_msr_plat;
struct muldiv muldiv[MAX_NUM_FREQS];
/*
* Some CPU frequencies in the SDM do not map to known PLL freqs, in
* that case the muldiv array is empty and the freqs array is used.
*/
u32 freqs[MAX_NUM_FREQS];
u32 mask;
};
/*
* Penwell and Clovertrail use spread spectrum clock,
* so the freq number is not exactly the same as reported
* by MSR based on SDM.
*/
static const struct freq_desc freq_desc_pnw = {
.use_msr_plat = false,
.freqs = { 0, 0, 0, 0, 0, 99840, 0, 83200 },
.mask = 0x07,
};
static const struct freq_desc freq_desc_clv = {
.use_msr_plat = false,
.freqs = { 0, 133200, 0, 0, 0, 99840, 0, 83200 },
.mask = 0x07,
};
/*
* Bay Trail SDM MSR_FSB_FREQ frequencies simplified PLL model:
* 000: 100 * 5 / 6 = 83.3333 MHz
* 001: 100 * 1 / 1 = 100.0000 MHz
* 010: 100 * 4 / 3 = 133.3333 MHz
* 011: 100 * 7 / 6 = 116.6667 MHz
* 100: 100 * 4 / 5 = 80.0000 MHz
*/
static const struct freq_desc freq_desc_byt = {
.use_msr_plat = true,
.muldiv = { { 5, 6 }, { 1, 1 }, { 4, 3 }, { 7, 6 },
{ 4, 5 } },
.mask = 0x07,
};
/*
* Cherry Trail SDM MSR_FSB_FREQ frequencies simplified PLL model:
* 0000: 100 * 5 / 6 = 83.3333 MHz
* 0001: 100 * 1 / 1 = 100.0000 MHz
* 0010: 100 * 4 / 3 = 133.3333 MHz
* 0011: 100 * 7 / 6 = 116.6667 MHz
* 0100: 100 * 4 / 5 = 80.0000 MHz
* 0101: 100 * 14 / 15 = 93.3333 MHz
* 0110: 100 * 9 / 10 = 90.0000 MHz
* 0111: 100 * 8 / 9 = 88.8889 MHz
* 1000: 100 * 7 / 8 = 87.5000 MHz
*/
static const struct freq_desc freq_desc_cht = {
.use_msr_plat = true,
.muldiv = { { 5, 6 }, { 1, 1 }, { 4, 3 }, { 7, 6 },
{ 4, 5 }, { 14, 15 }, { 9, 10 }, { 8, 9 },
{ 7, 8 } },
.mask = 0x0f,
};
/*
* Merriefield SDM MSR_FSB_FREQ frequencies simplified PLL model:
* 0001: 100 * 1 / 1 = 100.0000 MHz
* 0010: 100 * 4 / 3 = 133.3333 MHz
*/
static const struct freq_desc freq_desc_tng = {
.use_msr_plat = true,
.muldiv = { { 0, 0 }, { 1, 1 }, { 4, 3 } },
.mask = 0x07,
};
/*
* Moorefield SDM MSR_FSB_FREQ frequencies simplified PLL model:
* 0000: 100 * 5 / 6 = 83.3333 MHz
* 0001: 100 * 1 / 1 = 100.0000 MHz
* 0010: 100 * 4 / 3 = 133.3333 MHz
* 0011: 100 * 1 / 1 = 100.0000 MHz
*/
static const struct freq_desc freq_desc_ann = {
.use_msr_plat = true,
.muldiv = { { 5, 6 }, { 1, 1 }, { 4, 3 }, { 1, 1 } },
.mask = 0x0f,
};
/*
* 24 MHz crystal? : 24 * 13 / 4 = 78 MHz
* Frequency step for Lightning Mountain SoC is fixed to 78 MHz,
* so all the frequency entries are 78000.
*/
static const struct freq_desc freq_desc_lgm = {
.use_msr_plat = true,
.freqs = { 78000, 78000, 78000, 78000, 78000, 78000, 78000, 78000,
78000, 78000, 78000, 78000, 78000, 78000, 78000, 78000 },
.mask = 0x0f,
};
static const struct x86_cpu_id tsc_msr_cpu_ids[] = {
X86_MATCH_INTEL_FAM6_MODEL(ATOM_SALTWELL_MID, &freq_desc_pnw),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_SALTWELL_TABLET,&freq_desc_clv),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT, &freq_desc_byt),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID, &freq_desc_tng),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT, &freq_desc_cht),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT_MID, &freq_desc_ann),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT_NP, &freq_desc_lgm),
{}
};
/*
* MSR-based CPU/TSC frequency discovery for certain CPUs.
*
* Set global "lapic_timer_period" to bus_clock_cycles/jiffy
* Return processor base frequency in KHz, or 0 on failure.
*/
unsigned long cpu_khz_from_msr(void)
{
u32 lo, hi, ratio, freq, tscref;
const struct freq_desc *freq_desc;
const struct x86_cpu_id *id;
const struct muldiv *md;
unsigned long res;
int index;
id = x86_match_cpu(tsc_msr_cpu_ids);
if (!id)
return 0;
freq_desc = (struct freq_desc *)id->driver_data;
if (freq_desc->use_msr_plat) {
rdmsr(MSR_PLATFORM_INFO, lo, hi);
ratio = (lo >> 8) & 0xff;
} else {
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
ratio = (hi >> 8) & 0x1f;
}
/* Get FSB FREQ ID */
rdmsr(MSR_FSB_FREQ, lo, hi);
index = lo & freq_desc->mask;
md = &freq_desc->muldiv[index];
/*
* Note this also catches cases where the index points to an unpopulated
* part of muldiv, in that case the else will set freq and res to 0.
*/
if (md->divider) {
tscref = TSC_REFERENCE_KHZ * md->multiplier;
freq = DIV_ROUND_CLOSEST(tscref, md->divider);
/*
* Multiplying by ratio before the division has better
* accuracy than just calculating freq * ratio.
*/
res = DIV_ROUND_CLOSEST(tscref * ratio, md->divider);
} else {
freq = freq_desc->freqs[index];
res = freq * ratio;
}
if (freq == 0)
pr_err("Error MSR_FSB_FREQ index %d is unknown\n", index);
#ifdef CONFIG_X86_LOCAL_APIC
lapic_timer_period = (freq * 1000) / HZ;
#endif
/*
* TSC frequency determined by MSR is always considered "known"
* because it is reported by HW.
* Another fact is that on MSR capable platforms, PIT/HPET is
* generally not available so calibration won't work at all.
*/
setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
/*
* Unfortunately there is no way for hardware to tell whether the
* TSC is reliable. We were told by silicon design team that TSC
* on Atom SoCs are always "reliable". TSC is also the only
* reliable clocksource on these SoCs (HPET is either not present
* or not functional) so mark TSC reliable which removes the
* requirement for a watchdog clocksource.
*/
setup_force_cpu_cap(X86_FEATURE_TSC_RELIABLE);
return res;
}