arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts - third_party/linux - Git at Google

 /*
  * Copyright (c) 2017 MediaTek Inc.
  * Author: Ming Huang <ming.huang@mediatek.com>
  *	   Sean Wang <sean.wang@mediatek.com>
  *
  * SPDX-License-Identifier: (GPL-2.0 OR MIT)
  */

 /dts-v1/;
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>

 #include "mt7622.dtsi"
 #include "mt6380.dtsi"

 / {
 	model = "MediaTek MT7622 RFB1 board";
 	compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";

 	chosen {
 		bootargs = "console=ttyS0,115200n1 swiotlb=512";
 	};

 	cpus {
 		cpu@0 {
 			proc-supply = <&mt6380_vcpu_reg>;
 			sram-supply = <&mt6380_vm_reg>;
 		};

 		cpu@1 {
 			proc-supply = <&mt6380_vcpu_reg>;
 			sram-supply = <&mt6380_vm_reg>;
 		};
 	};

 	gpio-keys {
 		compatible = "gpio-keys-polled";
 		poll-interval = <100>;

 		factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 0 0>;
 		};

 		wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 102 0>;
 		};
 	};

 	memory {
 		reg = <0 0x40000000 0 0x3F000000>;
 	};

 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
 	};

 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;
 		regulator-always-on;
 	};

 	reg_5v: regulator-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-5V";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-boot-on;
 		regulator-always-on;
 	};
 };

 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie0_pins>;
 	status = "okay";

 	pcie@0,0 {
 		status = "okay";
 	};
 };

 &pio {
 	/* eMMC is shared pin with parallel NAND */
 	emmc_pins_default: emmc-pins-default {
 		mux {
 			function = "emmc", "emmc_rst";
 			groups = "emmc";
 		};

 		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
 		 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
 		 * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
 		 */
 		conf-cmd-dat {
 			pins = "NDL0", "NDL1", "NDL2",
 			       "NDL3", "NDL4", "NDL5",
 			       "NDL6", "NDL7", "NRB";
 			input-enable;
 			bias-pull-up;
 		};

 		conf-clk {
 			pins = "NCLE";
 			bias-pull-down;
 		};
 	};

 	emmc_pins_uhs: emmc-pins-uhs {
 		mux {
 			function = "emmc";
 			groups = "emmc";
 		};

 		conf-cmd-dat {
 			pins = "NDL0", "NDL1", "NDL2",
 			       "NDL3", "NDL4", "NDL5",
 			       "NDL6", "NDL7", "NRB";
 			input-enable;
 			drive-strength = <4>;
 			bias-pull-up;
 		};

 		conf-clk {
 			pins = "NCLE";
 			drive-strength = <4>;
 			bias-pull-down;
 		};
 	};

 	eth_pins: eth-pins {
 		mux {
 			function = "eth";
 			groups = "mdc_mdio", "rgmii_via_gmac2";
 		};
 	};

 	i2c1_pins: i2c1-pins {
 		mux {
 			function = "i2c";
 			groups =  "i2c1_0";
 		};
 	};

 	i2c2_pins: i2c2-pins {
 		mux {
 			function = "i2c";
 			groups =  "i2c2_0";
 		};
 	};

 	i2s1_pins: i2s1-pins {
 		mux {
 			function = "i2s";
 			groups =  "i2s_out_mclk_bclk_ws",
 				  "i2s1_in_data",
 				  "i2s1_out_data";
 		};

 		conf {
 			pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
 			       "I2S_WS", "I2S_MCLK";
 			drive-strength = <12>;
 			bias-pull-down;
 		};
 	};

 	irrx_pins: irrx-pins {
 		mux {
 			function = "ir";
 			groups =  "ir_1_rx";
 		};
 	};

 	irtx_pins: irtx-pins {
 		mux {
 			function = "ir";
 			groups =  "ir_1_tx";
 		};
 	};

 	/* Parallel nand is shared pin with eMMC */
 	parallel_nand_pins: parallel-nand-pins {
 		mux {
 			function = "flash";
 			groups = "par_nand";
 		};
 	};

 	pcie0_pins: pcie0-pins {
 		mux {
 			function = "pcie";
 			groups = "pcie0_pad_perst",
 				 "pcie0_1_waken",
 				 "pcie0_1_clkreq";
 		};
 	};

 	pcie1_pins: pcie1-pins {
 		mux {
 			function = "pcie";
 			groups = "pcie1_pad_perst",
 				 "pcie1_0_waken",
 				 "pcie1_0_clkreq";
 		};
 	};

 	pmic_bus_pins: pmic-bus-pins {
 		mux {
 			function = "pmic";
 			groups = "pmic_bus";
 		};
 	};

 	pwm7_pins: pwm1-2-pins {
 		mux {
 			function = "pwm";
 			groups = "pwm_ch7_2";
 		};
 	};

 	wled_pins: wled-pins {
 		mux {
 			function = "led";
 			groups = "wled";
 		};
 	};

 	sd0_pins_default: sd0-pins-default {
 		mux {
 			function = "sd";
 			groups = "sd_0";
 		};

 		/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
 		 *  "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
 		 *  DAT2, DAT3, CMD, CLK for SD respectively.
 		 */
 		conf-cmd-data {
 			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
 			       "I2S2_IN","I2S4_OUT";
 			input-enable;
 			drive-strength = <8>;
 			bias-pull-up;
 		};
 		conf-clk {
 			pins = "I2S3_OUT";
 			drive-strength = <12>;
 			bias-pull-down;
 		};
 		conf-cd {
 			pins = "TXD3";
 			bias-pull-up;
 		};
 	};

 	sd0_pins_uhs: sd0-pins-uhs {
 		mux {
 			function = "sd";
 			groups = "sd_0";
 		};

 		conf-cmd-data {
 			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
 			       "I2S2_IN","I2S4_OUT";
 			input-enable;
 			bias-pull-up;
 		};

 		conf-clk {
 			pins = "I2S3_OUT";
 			bias-pull-down;
 		};
 	};

 	/* Serial NAND is shared pin with SPI-NOR */
 	serial_nand_pins: serial-nand-pins {
 		mux {
 			function = "flash";
 			groups = "snfi";
 		};
 	};

 	spic0_pins: spic0-pins {
 		mux {
 			function = "spi";
 			groups = "spic0_0";
 		};
 	};

 	spic1_pins: spic1-pins {
 		mux {
 			function = "spi";
 			groups = "spic1_0";
 		};
 	};

 	/* SPI-NOR is shared pin with serial NAND */
 	spi_nor_pins: spi-nor-pins {
 		mux {
 			function = "flash";
 			groups = "spi_nor";
 		};
 	};

 	/* serial NAND is shared pin with SPI-NOR */
 	serial_nand_pins: serial-nand-pins {
 		mux {
 			function = "flash";
 			groups = "snfi";
 		};
 	};

 	uart0_pins: uart0-pins {
 		mux {
 			function = "uart";
 			groups = "uart0_0_tx_rx" ;
 		};
 	};

 	uart2_pins: uart2-pins {
 		mux {
 			function = "uart";
 			groups = "uart2_1_tx_rx" ;
 		};
 	};

 	watchdog_pins: watchdog-pins {
 		mux {
 			function = "watchdog";
 			groups = "watchdog";
 		};
 	};
 };

 &bch {
 	status = "disabled";
 };

 &btif {
 	status = "okay";
 };

 &cir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&irrx_pins>;
 	status = "okay";
 };

 &eth {
 	pinctrl-names = "default";
 	pinctrl-0 = <&eth_pins>;
 	status = "okay";

 	gmac1: mac@1 {
 		compatible = "mediatek,eth-mac";
 		reg = <1>;
 		phy-handle = <&phy5>;
 	};

 	mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;

 		phy5: ethernet-phy@5 {
 			reg = <5>;
 			phy-mode = "sgmii";
 		};
 	};
 };

 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };

 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 };

 &mmc0 {
 	pinctrl-names = "default", "state_uhs";
 	pinctrl-0 = <&emmc_pins_default>;
 	pinctrl-1 = <&emmc_pins_uhs>;
 	status = "okay";
 	bus-width = <8>;
 	max-frequency = <50000000>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_1p8v>;
 	assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
 	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
 	non-removable;
 };

 &mmc1 {
 	pinctrl-names = "default", "state_uhs";
 	pinctrl-0 = <&sd0_pins_default>;
 	pinctrl-1 = <&sd0_pins_uhs>;
 	status = "okay";
 	bus-width = <4>;
 	max-frequency = <50000000>;
 	cap-sd-highspeed;
 	r_smpl = <1>;
 	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_3p3v>;
 	assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
 	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
 };

 &nandc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&parallel_nand_pins>;
 	status = "disabled";
 };

 &nor_flash {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi_nor_pins>;
 	status = "disabled";

 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 	};
 };

 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm7_pins>;
 	status = "okay";
 };

 &pwrap {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pmic_bus_pins>;

 	status = "okay";
 };

 &sata {
 	status = "okay";
 };

 &sata_phy {
 	status = "okay";
 };

 &spi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spic0_pins>;
 	status = "okay";
 };

 &spi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spic1_pins>;
 	status = "okay";
 };

 &ssusb {
 	vusb33-supply = <&reg_3p3v>;
 	vbus-supply = <&reg_5v>;
 	status = "okay";
 };

 &u3phy {
 	status = "okay";
 };

 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };

 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
 	status = "okay";
 };

 &watchdog {
 	pinctrl-names = "default";
 	pinctrl-0 = <&watchdog_pins>;
 	status = "okay";
 };
	/*
	* Copyright (c) 2017 MediaTek Inc.
	* Author: Ming Huang <ming.huang@mediatek.com>
	* Sean Wang <sean.wang@mediatek.com>
	*
	* SPDX-License-Identifier: (GPL-2.0 OR MIT)
	*/

	/dts-v1/;
	#include <dt-bindings/input/input.h>
	#include <dt-bindings/gpio/gpio.h>

	#include "mt7622.dtsi"
	#include "mt6380.dtsi"

	/ {
	model = "MediaTek MT7622 RFB1 board";
	compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";

	chosen {
	bootargs = "console=ttyS0,115200n1 swiotlb=512";
	};

	cpus {
	cpu@0 {
	proc-supply = <&mt6380_vcpu_reg>;
	sram-supply = <&mt6380_vm_reg>;
	};

	cpu@1 {
	proc-supply = <&mt6380_vcpu_reg>;
	sram-supply = <&mt6380_vm_reg>;
	};
	};

	gpio-keys {
	compatible = "gpio-keys-polled";
	poll-interval = <100>;

	factory {
	label = "factory";
	linux,code = <BTN_0>;
	gpios = <&pio 0 0>;
	};

	wps {
	label = "wps";
	linux,code = <KEY_WPS_BUTTON>;
	gpios = <&pio 102 0>;
	};
	};

	memory {
	reg = <0 0x40000000 0 0x3F000000>;
	};

	reg_1p8v: regulator-1p8v {
	compatible = "regulator-fixed";
	regulator-name = "fixed-1.8V";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	};

	reg_3p3v: regulator-3p3v {
	compatible = "regulator-fixed";
	regulator-name = "fixed-3.3V";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-boot-on;
	regulator-always-on;
	};

	reg_5v: regulator-5v {
	compatible = "regulator-fixed";
	regulator-name = "fixed-5V";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	regulator-boot-on;
	regulator-always-on;
	};
	};

	&pcie {
	pinctrl-names = "default";
	pinctrl-0 = <&pcie0_pins>;
	status = "okay";

	pcie@0,0 {
	status = "okay";
	};
	};

	&pio {
	/* eMMC is shared pin with parallel NAND */
	emmc_pins_default: emmc-pins-default {
	mux {
	function = "emmc", "emmc_rst";
	groups = "emmc";
	};

	/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
	* "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
	* DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
	*/
	conf-cmd-dat {
	pins = "NDL0", "NDL1", "NDL2",
	"NDL3", "NDL4", "NDL5",
	"NDL6", "NDL7", "NRB";
	input-enable;
	bias-pull-up;
	};

	conf-clk {
	pins = "NCLE";
	bias-pull-down;
	};
	};

	emmc_pins_uhs: emmc-pins-uhs {
	mux {
	function = "emmc";
	groups = "emmc";
	};

	conf-cmd-dat {
	pins = "NDL0", "NDL1", "NDL2",
	"NDL3", "NDL4", "NDL5",
	"NDL6", "NDL7", "NRB";
	input-enable;
	drive-strength = <4>;
	bias-pull-up;
	};

	conf-clk {
	pins = "NCLE";
	drive-strength = <4>;
	bias-pull-down;
	};
	};

	eth_pins: eth-pins {
	mux {
	function = "eth";
	groups = "mdc_mdio", "rgmii_via_gmac2";
	};
	};

	i2c1_pins: i2c1-pins {
	mux {
	function = "i2c";
	groups = "i2c1_0";
	};
	};

	i2c2_pins: i2c2-pins {
	mux {
	function = "i2c";
	groups = "i2c2_0";
	};
	};

	i2s1_pins: i2s1-pins {
	mux {
	function = "i2s";
	groups = "i2s_out_mclk_bclk_ws",
	"i2s1_in_data",
	"i2s1_out_data";
	};

	conf {
	pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
	"I2S_WS", "I2S_MCLK";
	drive-strength = <12>;
	bias-pull-down;
	};
	};

	irrx_pins: irrx-pins {
	mux {
	function = "ir";
	groups = "ir_1_rx";
	};
	};

	irtx_pins: irtx-pins {
	mux {
	function = "ir";
	groups = "ir_1_tx";
	};
	};

	/* Parallel nand is shared pin with eMMC */
	parallel_nand_pins: parallel-nand-pins {
	mux {
	function = "flash";
	groups = "par_nand";
	};
	};

	pcie0_pins: pcie0-pins {
	mux {
	function = "pcie";
	groups = "pcie0_pad_perst",
	"pcie0_1_waken",
	"pcie0_1_clkreq";
	};
	};

	pcie1_pins: pcie1-pins {
	mux {
	function = "pcie";
	groups = "pcie1_pad_perst",
	"pcie1_0_waken",
	"pcie1_0_clkreq";
	};
	};

	pmic_bus_pins: pmic-bus-pins {
	mux {
	function = "pmic";
	groups = "pmic_bus";
	};
	};

	pwm7_pins: pwm1-2-pins {
	mux {
	function = "pwm";
	groups = "pwm_ch7_2";
	};
	};

	wled_pins: wled-pins {
	mux {
	function = "led";
	groups = "wled";
	};
	};

	sd0_pins_default: sd0-pins-default {
	mux {
	function = "sd";
	groups = "sd_0";
	};

	/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
	* "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
	* DAT2, DAT3, CMD, CLK for SD respectively.
	*/
	conf-cmd-data {
	pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
	"I2S2_IN","I2S4_OUT";
	input-enable;
	drive-strength = <8>;
	bias-pull-up;
	};
	conf-clk {
	pins = "I2S3_OUT";
	drive-strength = <12>;
	bias-pull-down;
	};
	conf-cd {
	pins = "TXD3";
	bias-pull-up;
	};
	};

	sd0_pins_uhs: sd0-pins-uhs {
	mux {
	function = "sd";
	groups = "sd_0";
	};

	conf-cmd-data {
	pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
	"I2S2_IN","I2S4_OUT";
	input-enable;
	bias-pull-up;
	};

	conf-clk {
	pins = "I2S3_OUT";
	bias-pull-down;
	};
	};

	/* Serial NAND is shared pin with SPI-NOR */
	serial_nand_pins: serial-nand-pins {
	mux {
	function = "flash";
	groups = "snfi";
	};
	};

	spic0_pins: spic0-pins {
	mux {
	function = "spi";
	groups = "spic0_0";
	};
	};

	spic1_pins: spic1-pins {
	mux {
	function = "spi";
	groups = "spic1_0";
	};
	};

	/* SPI-NOR is shared pin with serial NAND */
	spi_nor_pins: spi-nor-pins {
	mux {
	function = "flash";
	groups = "spi_nor";
	};
	};

	/* serial NAND is shared pin with SPI-NOR */
	serial_nand_pins: serial-nand-pins {
	mux {
	function = "flash";
	groups = "snfi";
	};
	};

	uart0_pins: uart0-pins {
	mux {
	function = "uart";
	groups = "uart0_0_tx_rx" ;
	};
	};

	uart2_pins: uart2-pins {
	mux {
	function = "uart";
	groups = "uart2_1_tx_rx" ;
	};
	};

	watchdog_pins: watchdog-pins {
	mux {
	function = "watchdog";
	groups = "watchdog";
	};
	};
	};

	&bch {
	status = "disabled";
	};

	&btif {
	status = "okay";
	};

	&cir {
	pinctrl-names = "default";
	pinctrl-0 = <&irrx_pins>;
	status = "okay";
	};

	&eth {
	pinctrl-names = "default";
	pinctrl-0 = <&eth_pins>;
	status = "okay";

	gmac1: mac@1 {
	compatible = "mediatek,eth-mac";
	reg = <1>;
	phy-handle = <&phy5>;
	};

	mdio-bus {
	#address-cells = <1>;
	#size-cells = <0>;

	phy5: ethernet-phy@5 {
	reg = <5>;
	phy-mode = "sgmii";
	};
	};
	};

	&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;
	status = "okay";
	};

	&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;
	status = "okay";
	};

	&mmc0 {
	pinctrl-names = "default", "state_uhs";
	pinctrl-0 = <&emmc_pins_default>;
	pinctrl-1 = <&emmc_pins_uhs>;
	status = "okay";
	bus-width = <8>;
	max-frequency = <50000000>;
	cap-mmc-highspeed;
	mmc-hs200-1_8v;
	vmmc-supply = <&reg_3p3v>;
	vqmmc-supply = <&reg_1p8v>;
	assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
	non-removable;
	};

	&mmc1 {
	pinctrl-names = "default", "state_uhs";
	pinctrl-0 = <&sd0_pins_default>;
	pinctrl-1 = <&sd0_pins_uhs>;
	status = "okay";
	bus-width = <4>;
	max-frequency = <50000000>;
	cap-sd-highspeed;
	r_smpl = <1>;
	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
	vmmc-supply = <&reg_3p3v>;
	vqmmc-supply = <&reg_3p3v>;
	assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
	};

	&nandc {
	pinctrl-names = "default";
	pinctrl-0 = <&parallel_nand_pins>;
	status = "disabled";
	};

	&nor_flash {
	pinctrl-names = "default";
	pinctrl-0 = <&spi_nor_pins>;
	status = "disabled";

	flash@0 {
	compatible = "jedec,spi-nor";
	reg = <0>;
	};
	};

	&pwm {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm7_pins>;
	status = "okay";
	};

	&pwrap {
	pinctrl-names = "default";
	pinctrl-0 = <&pmic_bus_pins>;

	status = "okay";
	};

	&sata {
	status = "okay";
	};

	&sata_phy {
	status = "okay";
	};

	&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&spic0_pins>;
	status = "okay";
	};

	&spi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&spic1_pins>;
	status = "okay";
	};

	&ssusb {
	vusb33-supply = <&reg_3p3v>;
	vbus-supply = <&reg_5v>;
	status = "okay";
	};

	&u3phy {
	status = "okay";
	};

	&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pins>;
	status = "okay";
	};

	&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
	status = "okay";
	};

	&watchdog {
	pinctrl-names = "default";
	pinctrl-0 = <&watchdog_pins>;
	status = "okay";
	};