| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * linux/drivers/rtc/rtc-pl030.c |
| * |
| * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. |
| */ |
| #include <linux/module.h> |
| #include <linux/rtc.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/amba/bus.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| |
| #define RTC_DR (0) |
| #define RTC_MR (4) |
| #define RTC_STAT (8) |
| #define RTC_EOI (8) |
| #define RTC_LR (12) |
| #define RTC_CR (16) |
| #define RTC_CR_MIE (1 << 0) |
| |
| struct pl030_rtc { |
| struct rtc_device *rtc; |
| void __iomem *base; |
| }; |
| |
| static irqreturn_t pl030_interrupt(int irq, void *dev_id) |
| { |
| struct pl030_rtc *rtc = dev_id; |
| writel(0, rtc->base + RTC_EOI); |
| return IRQ_HANDLED; |
| } |
| |
| static int pl030_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct pl030_rtc *rtc = dev_get_drvdata(dev); |
| |
| rtc_time_to_tm(readl(rtc->base + RTC_MR), &alrm->time); |
| return 0; |
| } |
| |
| static int pl030_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct pl030_rtc *rtc = dev_get_drvdata(dev); |
| unsigned long time; |
| int ret; |
| |
| /* |
| * At the moment, we can only deal with non-wildcarded alarm times. |
| */ |
| ret = rtc_valid_tm(&alrm->time); |
| if (ret == 0) |
| ret = rtc_tm_to_time(&alrm->time, &time); |
| if (ret == 0) |
| writel(time, rtc->base + RTC_MR); |
| return ret; |
| } |
| |
| static int pl030_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct pl030_rtc *rtc = dev_get_drvdata(dev); |
| |
| rtc_time_to_tm(readl(rtc->base + RTC_DR), tm); |
| |
| return 0; |
| } |
| |
| /* |
| * Set the RTC time. Unfortunately, we can't accurately set |
| * the point at which the counter updates. |
| * |
| * Also, since RTC_LR is transferred to RTC_CR on next rising |
| * edge of the 1Hz clock, we must write the time one second |
| * in advance. |
| */ |
| static int pl030_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct pl030_rtc *rtc = dev_get_drvdata(dev); |
| unsigned long time; |
| int ret; |
| |
| ret = rtc_tm_to_time(tm, &time); |
| if (ret == 0) |
| writel(time + 1, rtc->base + RTC_LR); |
| |
| return ret; |
| } |
| |
| static const struct rtc_class_ops pl030_ops = { |
| .read_time = pl030_read_time, |
| .set_time = pl030_set_time, |
| .read_alarm = pl030_read_alarm, |
| .set_alarm = pl030_set_alarm, |
| }; |
| |
| static int pl030_probe(struct amba_device *dev, const struct amba_id *id) |
| { |
| struct pl030_rtc *rtc; |
| int ret; |
| |
| ret = amba_request_regions(dev, NULL); |
| if (ret) |
| goto err_req; |
| |
| rtc = devm_kzalloc(&dev->dev, sizeof(*rtc), GFP_KERNEL); |
| if (!rtc) { |
| ret = -ENOMEM; |
| goto err_rtc; |
| } |
| |
| rtc->rtc = devm_rtc_allocate_device(&dev->dev); |
| if (IS_ERR(rtc->rtc)) { |
| ret = PTR_ERR(rtc->rtc); |
| goto err_rtc; |
| } |
| |
| rtc->rtc->ops = &pl030_ops; |
| rtc->base = ioremap(dev->res.start, resource_size(&dev->res)); |
| if (!rtc->base) { |
| ret = -ENOMEM; |
| goto err_rtc; |
| } |
| |
| __raw_writel(0, rtc->base + RTC_CR); |
| __raw_writel(0, rtc->base + RTC_EOI); |
| |
| amba_set_drvdata(dev, rtc); |
| |
| ret = request_irq(dev->irq[0], pl030_interrupt, 0, |
| "rtc-pl030", rtc); |
| if (ret) |
| goto err_irq; |
| |
| ret = rtc_register_device(rtc->rtc); |
| if (ret) |
| goto err_reg; |
| |
| return 0; |
| |
| err_reg: |
| free_irq(dev->irq[0], rtc); |
| err_irq: |
| iounmap(rtc->base); |
| err_rtc: |
| amba_release_regions(dev); |
| err_req: |
| return ret; |
| } |
| |
| static int pl030_remove(struct amba_device *dev) |
| { |
| struct pl030_rtc *rtc = amba_get_drvdata(dev); |
| |
| writel(0, rtc->base + RTC_CR); |
| |
| free_irq(dev->irq[0], rtc); |
| iounmap(rtc->base); |
| amba_release_regions(dev); |
| |
| return 0; |
| } |
| |
| static struct amba_id pl030_ids[] = { |
| { |
| .id = 0x00041030, |
| .mask = 0x000fffff, |
| }, |
| { 0, 0 }, |
| }; |
| |
| MODULE_DEVICE_TABLE(amba, pl030_ids); |
| |
| static struct amba_driver pl030_driver = { |
| .drv = { |
| .name = "rtc-pl030", |
| }, |
| .probe = pl030_probe, |
| .remove = pl030_remove, |
| .id_table = pl030_ids, |
| }; |
| |
| module_amba_driver(pl030_driver); |
| |
| MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); |
| MODULE_DESCRIPTION("ARM AMBA PL030 RTC Driver"); |
| MODULE_LICENSE("GPL"); |