| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * simple driver for PWM (Pulse Width Modulator) controller |
| * |
| * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com> |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| #include <linux/slab.h> |
| |
| #define MX1_PWMC 0x00 /* PWM Control Register */ |
| #define MX1_PWMS 0x04 /* PWM Sample Register */ |
| #define MX1_PWMP 0x08 /* PWM Period Register */ |
| |
| #define MX1_PWMC_EN BIT(4) |
| |
| struct pwm_imx1_chip { |
| struct clk *clk_ipg; |
| struct clk *clk_per; |
| void __iomem *mmio_base; |
| struct pwm_chip chip; |
| }; |
| |
| #define to_pwm_imx1_chip(chip) container_of(chip, struct pwm_imx1_chip, chip) |
| |
| static int pwm_imx1_clk_prepare_enable(struct pwm_chip *chip) |
| { |
| struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip); |
| int ret; |
| |
| ret = clk_prepare_enable(imx->clk_ipg); |
| if (ret) |
| return ret; |
| |
| ret = clk_prepare_enable(imx->clk_per); |
| if (ret) { |
| clk_disable_unprepare(imx->clk_ipg); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void pwm_imx1_clk_disable_unprepare(struct pwm_chip *chip) |
| { |
| struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip); |
| |
| clk_disable_unprepare(imx->clk_per); |
| clk_disable_unprepare(imx->clk_ipg); |
| } |
| |
| static int pwm_imx1_config(struct pwm_chip *chip, |
| struct pwm_device *pwm, int duty_ns, int period_ns) |
| { |
| struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip); |
| u32 max, p; |
| |
| /* |
| * The PWM subsystem allows for exact frequencies. However, |
| * I cannot connect a scope on my device to the PWM line and |
| * thus cannot provide the program the PWM controller |
| * exactly. Instead, I'm relying on the fact that the |
| * Bootloader (u-boot or WinCE+haret) has programmed the PWM |
| * function group already. So I'll just modify the PWM sample |
| * register to follow the ratio of duty_ns vs. period_ns |
| * accordingly. |
| * |
| * This is good enough for programming the brightness of |
| * the LCD backlight. |
| * |
| * The real implementation would divide PERCLK[0] first by |
| * both the prescaler (/1 .. /128) and then by CLKSEL |
| * (/2 .. /16). |
| */ |
| max = readl(imx->mmio_base + MX1_PWMP); |
| p = max * duty_ns / period_ns; |
| |
| writel(max - p, imx->mmio_base + MX1_PWMS); |
| |
| return 0; |
| } |
| |
| static int pwm_imx1_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip); |
| u32 value; |
| int ret; |
| |
| ret = pwm_imx1_clk_prepare_enable(chip); |
| if (ret < 0) |
| return ret; |
| |
| value = readl(imx->mmio_base + MX1_PWMC); |
| value |= MX1_PWMC_EN; |
| writel(value, imx->mmio_base + MX1_PWMC); |
| |
| return 0; |
| } |
| |
| static void pwm_imx1_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip); |
| u32 value; |
| |
| value = readl(imx->mmio_base + MX1_PWMC); |
| value &= ~MX1_PWMC_EN; |
| writel(value, imx->mmio_base + MX1_PWMC); |
| |
| pwm_imx1_clk_disable_unprepare(chip); |
| } |
| |
| static const struct pwm_ops pwm_imx1_ops = { |
| .enable = pwm_imx1_enable, |
| .disable = pwm_imx1_disable, |
| .config = pwm_imx1_config, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct of_device_id pwm_imx1_dt_ids[] = { |
| { .compatible = "fsl,imx1-pwm", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, pwm_imx1_dt_ids); |
| |
| static int pwm_imx1_probe(struct platform_device *pdev) |
| { |
| struct pwm_imx1_chip *imx; |
| struct resource *r; |
| |
| imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL); |
| if (!imx) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, imx); |
| |
| imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); |
| if (IS_ERR(imx->clk_ipg)) { |
| dev_err(&pdev->dev, "getting ipg clock failed with %ld\n", |
| PTR_ERR(imx->clk_ipg)); |
| return PTR_ERR(imx->clk_ipg); |
| } |
| |
| imx->clk_per = devm_clk_get(&pdev->dev, "per"); |
| if (IS_ERR(imx->clk_per)) { |
| int ret = PTR_ERR(imx->clk_per); |
| |
| if (ret != -EPROBE_DEFER) |
| dev_err(&pdev->dev, |
| "failed to get peripheral clock: %d\n", |
| ret); |
| |
| return ret; |
| } |
| |
| imx->chip.ops = &pwm_imx1_ops; |
| imx->chip.dev = &pdev->dev; |
| imx->chip.base = -1; |
| imx->chip.npwm = 1; |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| imx->mmio_base = devm_ioremap_resource(&pdev->dev, r); |
| if (IS_ERR(imx->mmio_base)) |
| return PTR_ERR(imx->mmio_base); |
| |
| return pwmchip_add(&imx->chip); |
| } |
| |
| static int pwm_imx1_remove(struct platform_device *pdev) |
| { |
| struct pwm_imx1_chip *imx = platform_get_drvdata(pdev); |
| |
| return pwmchip_remove(&imx->chip); |
| } |
| |
| static struct platform_driver pwm_imx1_driver = { |
| .driver = { |
| .name = "pwm-imx1", |
| .of_match_table = pwm_imx1_dt_ids, |
| }, |
| .probe = pwm_imx1_probe, |
| .remove = pwm_imx1_remove, |
| }; |
| module_platform_driver(pwm_imx1_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); |