| /* | 
 |  * linux/driver/usb/host/ehci-w90x900.c | 
 |  * | 
 |  * Copyright (c) 2008 Nuvoton technology corporation. | 
 |  * | 
 |  * Wan ZongShun <mcuos.com@gmail.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation;version 2 of the License. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/platform_device.h> | 
 |  | 
 | /*ebable phy0 and phy1 for w90p910*/ | 
 | #define	ENPHY		(0x01<<8) | 
 | #define PHY0_CTR	(0xA4) | 
 | #define PHY1_CTR	(0xA8) | 
 |  | 
 | static int __devinit usb_w90x900_probe(const struct hc_driver *driver, | 
 | 		      struct platform_device *pdev) | 
 | { | 
 | 	struct usb_hcd *hcd; | 
 | 	struct ehci_hcd *ehci; | 
 | 	struct resource *res; | 
 | 	int retval = 0, irq; | 
 | 	unsigned long val; | 
 |  | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	if (!res) { | 
 | 		retval = -ENXIO; | 
 | 		goto err1; | 
 | 	} | 
 |  | 
 | 	hcd = usb_create_hcd(driver, &pdev->dev, "w90x900 EHCI"); | 
 | 	if (!hcd) { | 
 | 		retval = -ENOMEM; | 
 | 		goto err1; | 
 | 	} | 
 |  | 
 | 	hcd->rsrc_start = res->start; | 
 | 	hcd->rsrc_len = res->end - res->start + 1; | 
 |  | 
 | 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { | 
 | 		retval = -EBUSY; | 
 | 		goto err2; | 
 | 	} | 
 |  | 
 | 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); | 
 | 	if (hcd->regs == NULL) { | 
 | 		retval = -EFAULT; | 
 | 		goto err3; | 
 | 	} | 
 |  | 
 | 	ehci = hcd_to_ehci(hcd); | 
 | 	ehci->caps = hcd->regs; | 
 | 	ehci->regs = hcd->regs + | 
 | 		 HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); | 
 |  | 
 | 	/* enable PHY 0,1,the regs only apply to w90p910 | 
 | 	*  0xA4,0xA8 were offsets of PHY0 and PHY1 controller of | 
 | 	*  w90p910 IC relative to ehci->regs. | 
 | 	*/ | 
 | 	val = __raw_readl(ehci->regs+PHY0_CTR); | 
 | 	val |= ENPHY; | 
 | 	__raw_writel(val, ehci->regs+PHY0_CTR); | 
 |  | 
 | 	val = __raw_readl(ehci->regs+PHY1_CTR); | 
 | 	val |= ENPHY; | 
 | 	__raw_writel(val, ehci->regs+PHY1_CTR); | 
 |  | 
 | 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); | 
 | 	ehci->sbrn = 0x20; | 
 |  | 
 | 	irq = platform_get_irq(pdev, 0); | 
 | 	if (irq < 0) | 
 | 		goto err4; | 
 |  | 
 | 	retval = usb_add_hcd(hcd, irq, IRQF_SHARED); | 
 | 	if (retval != 0) | 
 | 		goto err4; | 
 |  | 
 | 	ehci_writel(ehci, 1, &ehci->regs->configured_flag); | 
 |  | 
 | 	return retval; | 
 | err4: | 
 | 	iounmap(hcd->regs); | 
 | err3: | 
 | 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | 
 | err2: | 
 | 	usb_put_hcd(hcd); | 
 | err1: | 
 | 	return retval; | 
 | } | 
 |  | 
 | static | 
 | void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev) | 
 | { | 
 | 	usb_remove_hcd(hcd); | 
 | 	iounmap(hcd->regs); | 
 | 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | 
 | 	usb_put_hcd(hcd); | 
 | } | 
 |  | 
 | static const struct hc_driver ehci_w90x900_hc_driver = { | 
 | 	.description = hcd_name, | 
 | 	.product_desc = "Nuvoton w90x900 EHCI Host Controller", | 
 | 	.hcd_priv_size = sizeof(struct ehci_hcd), | 
 |  | 
 | 	/* | 
 | 	 * generic hardware linkage | 
 | 	 */ | 
 | 	.irq = ehci_irq, | 
 | 	.flags = HCD_USB2|HCD_MEMORY, | 
 |  | 
 | 	/* | 
 | 	 * basic lifecycle operations | 
 | 	 */ | 
 | 	.reset = ehci_init, | 
 | 	.start = ehci_run, | 
 |  | 
 | 	.stop = ehci_stop, | 
 | 	.shutdown = ehci_shutdown, | 
 |  | 
 | 	/* | 
 | 	 * managing i/o requests and associated device resources | 
 | 	 */ | 
 | 	.urb_enqueue = ehci_urb_enqueue, | 
 | 	.urb_dequeue = ehci_urb_dequeue, | 
 | 	.endpoint_disable = ehci_endpoint_disable, | 
 | 	.endpoint_reset = ehci_endpoint_reset, | 
 |  | 
 | 	/* | 
 | 	 * scheduling support | 
 | 	 */ | 
 | 	.get_frame_number = ehci_get_frame, | 
 |  | 
 | 	/* | 
 | 	 * root hub support | 
 | 	 */ | 
 | 	.hub_status_data = ehci_hub_status_data, | 
 | 	.hub_control = ehci_hub_control, | 
 | #ifdef	CONFIG_PM | 
 | 	.bus_suspend = ehci_bus_suspend, | 
 | 	.bus_resume = ehci_bus_resume, | 
 | #endif | 
 | 	.relinquish_port	= ehci_relinquish_port, | 
 | 	.port_handed_over	= ehci_port_handed_over, | 
 |  | 
 | 	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, | 
 | }; | 
 |  | 
 | static int __devinit ehci_w90x900_probe(struct platform_device *pdev) | 
 | { | 
 | 	if (usb_disabled()) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return usb_w90x900_probe(&ehci_w90x900_hc_driver, pdev); | 
 | } | 
 |  | 
 | static int __devexit ehci_w90x900_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct usb_hcd *hcd = platform_get_drvdata(pdev); | 
 |  | 
 | 	usb_w90x900_remove(hcd, pdev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver ehci_hcd_w90x900_driver = { | 
 | 	.probe  = ehci_w90x900_probe, | 
 | 	.remove = __devexit_p(ehci_w90x900_remove), | 
 | 	.driver = { | 
 | 		.name = "w90x900-ehci", | 
 | 		.owner = THIS_MODULE, | 
 | 	}, | 
 | }; | 
 |  | 
 | MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); | 
 | MODULE_DESCRIPTION("w90p910 usb ehci driver!"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS("platform:w90p910-ehci"); |