blob: c4d06473747af5fa091aa19a61c129acdffe781a [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2019, The Linux Foundation. All rights reserved.
*/
#include <linux/clk-provider.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
#include "clk-alpha-pll.h"
#include "clk-branch.h"
#include "clk-rcg.h"
#include "clk-regmap.h"
#include "common.h"
#include "gdsc.h"
#define CX_GMU_CBCR_SLEEP_MASK 0xF
#define CX_GMU_CBCR_SLEEP_SHIFT 4
#define CX_GMU_CBCR_WAKE_MASK 0xF
#define CX_GMU_CBCR_WAKE_SHIFT 8
enum {
P_BI_TCXO,
P_CORE_BI_PLL_TEST_SE,
P_GPLL0_OUT_MAIN,
P_GPLL0_OUT_MAIN_DIV,
P_GPU_CC_PLL1_OUT_EVEN,
P_GPU_CC_PLL1_OUT_MAIN,
P_GPU_CC_PLL1_OUT_ODD,
};
static const struct pll_vco fabia_vco[] = {
{ 249600000, 2000000000, 0 },
};
static struct clk_alpha_pll gpu_cc_pll1 = {
.offset = 0x100,
.vco_table = fabia_vco,
.num_vco = ARRAY_SIZE(fabia_vco),
.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
.clkr = {
.hw.init = &(struct clk_init_data){
.name = "gpu_cc_pll1",
.parent_data = &(const struct clk_parent_data){
.fw_name = "bi_tcxo",
},
.num_parents = 1,
.ops = &clk_alpha_pll_fabia_ops,
},
},
};
static const struct parent_map gpu_cc_parent_map_0[] = {
{ P_BI_TCXO, 0 },
{ P_GPU_CC_PLL1_OUT_MAIN, 3 },
{ P_GPLL0_OUT_MAIN, 5 },
{ P_GPLL0_OUT_MAIN_DIV, 6 },
};
static const struct clk_parent_data gpu_cc_parent_data_0[] = {
{ .fw_name = "bi_tcxo" },
{ .hw = &gpu_cc_pll1.clkr.hw },
{ .fw_name = "gcc_gpu_gpll0_clk_src" },
{ .fw_name = "gcc_gpu_gpll0_div_clk_src" },
};
static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
F(19200000, P_BI_TCXO, 1, 0, 0),
F(200000000, P_GPLL0_OUT_MAIN_DIV, 1.5, 0, 0),
{ }
};
static struct clk_rcg2 gpu_cc_gmu_clk_src = {
.cmd_rcgr = 0x1120,
.mnd_width = 0,
.hid_width = 5,
.parent_map = gpu_cc_parent_map_0,
.freq_tbl = ftbl_gpu_cc_gmu_clk_src,
.clkr.hw.init = &(struct clk_init_data){
.name = "gpu_cc_gmu_clk_src",
.parent_data = gpu_cc_parent_data_0,
.num_parents = ARRAY_SIZE(gpu_cc_parent_data_0),
.flags = CLK_SET_RATE_PARENT,
.ops = &clk_rcg2_shared_ops,
},
};
static struct clk_branch gpu_cc_crc_ahb_clk = {
.halt_reg = 0x107c,
.halt_check = BRANCH_HALT_DELAY,
.clkr = {
.enable_reg = 0x107c,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gpu_cc_crc_ahb_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch gpu_cc_cx_gmu_clk = {
.halt_reg = 0x1098,
.halt_check = BRANCH_HALT,
.clkr = {
.enable_reg = 0x1098,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gpu_cc_cx_gmu_clk",
.parent_data = &(const struct clk_parent_data){
.hw = &gpu_cc_gmu_clk_src.clkr.hw,
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch gpu_cc_cx_snoc_dvm_clk = {
.halt_reg = 0x108c,
.halt_check = BRANCH_HALT_DELAY,
.clkr = {
.enable_reg = 0x108c,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gpu_cc_cx_snoc_dvm_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch gpu_cc_cxo_aon_clk = {
.halt_reg = 0x1004,
.halt_check = BRANCH_HALT_DELAY,
.clkr = {
.enable_reg = 0x1004,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gpu_cc_cxo_aon_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch gpu_cc_cxo_clk = {
.halt_reg = 0x109c,
.halt_check = BRANCH_HALT,
.clkr = {
.enable_reg = 0x109c,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gpu_cc_cxo_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct gdsc cx_gdsc = {
.gdscr = 0x106c,
.gds_hw_ctrl = 0x1540,
.clk_dis_wait_val = 8,
.pd = {
.name = "cx_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
.flags = VOTABLE,
};
/*
* On SC7180 the GPU GX domain is *almost* entirely controlled by the GMU
* running in the CX domain so the CPU doesn't need to know anything about the
* GX domain EXCEPT....
*
* Hardware constraints dictate that the GX be powered down before the CX. If
* the GMU crashes it could leave the GX on. In order to successfully bring back
* the device the CPU needs to disable the GX headswitch. There being no sane
* way to reach in and touch that register from deep inside the GPU driver we
* need to set up the infrastructure to be able to ensure that the GPU can
* ensure that the GX is off during this super special case. We do this by
* defining a GX gdsc with a dummy enable function and a "default" disable
* function.
*
* This allows us to attach with genpd_dev_pm_attach_by_name() in the GPU
* driver. During power up, nothing will happen from the CPU (and the GMU will
* power up normally but during power down this will ensure that the GX domain
* is *really* off - this gives us a semi standard way of doing what we need.
*/
static int gx_gdsc_enable(struct generic_pm_domain *domain)
{
/* Do nothing but give genpd the impression that we were successful */
return 0;
}
static struct gdsc gx_gdsc = {
.gdscr = 0x100c,
.clamp_io_ctrl = 0x1508,
.pd = {
.name = "gx_gdsc",
.power_on = gx_gdsc_enable,
},
.pwrsts = PWRSTS_OFF_ON,
.flags = CLAMP_IO,
};
static struct gdsc *gpu_cc_sc7180_gdscs[] = {
[CX_GDSC] = &cx_gdsc,
[GX_GDSC] = &gx_gdsc,
};
static struct clk_regmap *gpu_cc_sc7180_clocks[] = {
[GPU_CC_CXO_CLK] = &gpu_cc_cxo_clk.clkr,
[GPU_CC_CRC_AHB_CLK] = &gpu_cc_crc_ahb_clk.clkr,
[GPU_CC_CX_GMU_CLK] = &gpu_cc_cx_gmu_clk.clkr,
[GPU_CC_CX_SNOC_DVM_CLK] = &gpu_cc_cx_snoc_dvm_clk.clkr,
[GPU_CC_CXO_AON_CLK] = &gpu_cc_cxo_aon_clk.clkr,
[GPU_CC_GMU_CLK_SRC] = &gpu_cc_gmu_clk_src.clkr,
[GPU_CC_PLL1] = &gpu_cc_pll1.clkr,
};
static const struct regmap_config gpu_cc_sc7180_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.max_register = 0x8008,
.fast_io = true,
};
static const struct qcom_cc_desc gpu_cc_sc7180_desc = {
.config = &gpu_cc_sc7180_regmap_config,
.clks = gpu_cc_sc7180_clocks,
.num_clks = ARRAY_SIZE(gpu_cc_sc7180_clocks),
.gdscs = gpu_cc_sc7180_gdscs,
.num_gdscs = ARRAY_SIZE(gpu_cc_sc7180_gdscs),
};
static const struct of_device_id gpu_cc_sc7180_match_table[] = {
{ .compatible = "qcom,sc7180-gpucc" },
{ }
};
MODULE_DEVICE_TABLE(of, gpu_cc_sc7180_match_table);
static int gpu_cc_sc7180_probe(struct platform_device *pdev)
{
struct regmap *regmap;
struct alpha_pll_config gpu_cc_pll_config = {};
unsigned int value, mask;
regmap = qcom_cc_map(pdev, &gpu_cc_sc7180_desc);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
/* 360MHz Configuration */
gpu_cc_pll_config.l = 0x12;
gpu_cc_pll_config.alpha = 0xc000;
gpu_cc_pll_config.config_ctl_val = 0x20485699;
gpu_cc_pll_config.config_ctl_hi_val = 0x00002067;
gpu_cc_pll_config.user_ctl_val = 0x00000001;
gpu_cc_pll_config.user_ctl_hi_val = 0x00004805;
gpu_cc_pll_config.test_ctl_hi_val = 0x40000000;
clk_fabia_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll_config);
/* Recommended WAKEUP/SLEEP settings for the gpu_cc_cx_gmu_clk */
mask = CX_GMU_CBCR_WAKE_MASK << CX_GMU_CBCR_WAKE_SHIFT;
mask |= CX_GMU_CBCR_SLEEP_MASK << CX_GMU_CBCR_SLEEP_SHIFT;
value = 0xF << CX_GMU_CBCR_WAKE_SHIFT | 0xF << CX_GMU_CBCR_SLEEP_SHIFT;
regmap_update_bits(regmap, 0x1098, mask, value);
return qcom_cc_really_probe(pdev, &gpu_cc_sc7180_desc, regmap);
}
static struct platform_driver gpu_cc_sc7180_driver = {
.probe = gpu_cc_sc7180_probe,
.driver = {
.name = "sc7180-gpucc",
.of_match_table = gpu_cc_sc7180_match_table,
},
};
static int __init gpu_cc_sc7180_init(void)
{
return platform_driver_register(&gpu_cc_sc7180_driver);
}
subsys_initcall(gpu_cc_sc7180_init);
static void __exit gpu_cc_sc7180_exit(void)
{
platform_driver_unregister(&gpu_cc_sc7180_driver);
}
module_exit(gpu_cc_sc7180_exit);
MODULE_DESCRIPTION("QTI GPU_CC SC7180 Driver");
MODULE_LICENSE("GPL v2");