| /* |
| * Copyright (c) 2006-2008 Intel Corporation |
| * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> |
| * Copyright (c) 2008 Red Hat Inc. |
| * |
| * DRM core CRTC related functions |
| * |
| * Permission to use, copy, modify, distribute, and sell this software and its |
| * documentation for any purpose is hereby granted without fee, provided that |
| * the above copyright notice appear in all copies and that both that copyright |
| * notice and this permission notice appear in supporting documentation, and |
| * that the name of the copyright holders not be used in advertising or |
| * publicity pertaining to distribution of the software without specific, |
| * written prior permission. The copyright holders make no representations |
| * about the suitability of this software for any purpose. It is provided "as |
| * is" without express or implied warranty. |
| * |
| * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, |
| * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO |
| * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR |
| * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, |
| * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE |
| * OF THIS SOFTWARE. |
| * |
| * Authors: |
| * Keith Packard |
| * Eric Anholt <eric@anholt.net> |
| * Dave Airlie <airlied@linux.ie> |
| * Jesse Barnes <jesse.barnes@intel.com> |
| */ |
| #include <linux/ctype.h> |
| #include <linux/list.h> |
| #include <linux/slab.h> |
| #include <linux/export.h> |
| #include <linux/dma-fence.h> |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_modeset_lock.h> |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_auth.h> |
| #include <drm/drm_debugfs_crc.h> |
| |
| #include "drm_crtc_internal.h" |
| #include "drm_internal.h" |
| |
| /** |
| * DOC: overview |
| * |
| * A CRTC represents the overall display pipeline. It receives pixel data from |
| * &drm_plane and blends them together. The &drm_display_mode is also attached |
| * to the CRTC, specifying display timings. On the output side the data is fed |
| * to one or more &drm_encoder, which are then each connected to one |
| * &drm_connector. |
| * |
| * To create a CRTC, a KMS drivers allocates and zeroes an instances of |
| * &struct drm_crtc (possibly as part of a larger structure) and registers it |
| * with a call to drm_crtc_init_with_planes(). |
| * |
| * The CRTC is also the entry point for legacy modeset operations, see |
| * &drm_crtc_funcs.set_config, legacy plane operations, see |
| * &drm_crtc_funcs.page_flip and &drm_crtc_funcs.cursor_set2, and other legacy |
| * operations like &drm_crtc_funcs.gamma_set. For atomic drivers all these |
| * features are controlled through &drm_property and |
| * &drm_mode_config_funcs.atomic_check and &drm_mode_config_funcs.atomic_check. |
| */ |
| |
| /** |
| * drm_crtc_from_index - find the registered CRTC at an index |
| * @dev: DRM device |
| * @idx: index of registered CRTC to find for |
| * |
| * Given a CRTC index, return the registered CRTC from DRM device's |
| * list of CRTCs with matching index. This is the inverse of drm_crtc_index(). |
| * It's useful in the vblank callbacks (like &drm_driver.enable_vblank or |
| * &drm_driver.disable_vblank), since that still deals with indices instead |
| * of pointers to &struct drm_crtc." |
| */ |
| struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx) |
| { |
| struct drm_crtc *crtc; |
| |
| drm_for_each_crtc(crtc, dev) |
| if (idx == crtc->index) |
| return crtc; |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(drm_crtc_from_index); |
| |
| /** |
| * drm_crtc_force_disable - Forcibly turn off a CRTC |
| * @crtc: CRTC to turn off |
| * |
| * Note: This should only be used by non-atomic legacy drivers. |
| * |
| * Returns: |
| * Zero on success, error code on failure. |
| */ |
| int drm_crtc_force_disable(struct drm_crtc *crtc) |
| { |
| struct drm_mode_set set = { |
| .crtc = crtc, |
| }; |
| |
| WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev)); |
| |
| return drm_mode_set_config_internal(&set); |
| } |
| EXPORT_SYMBOL(drm_crtc_force_disable); |
| |
| /** |
| * drm_crtc_force_disable_all - Forcibly turn off all enabled CRTCs |
| * @dev: DRM device whose CRTCs to turn off |
| * |
| * Drivers may want to call this on unload to ensure that all displays are |
| * unlit and the GPU is in a consistent, low power state. Takes modeset locks. |
| * |
| * Note: This should only be used by non-atomic legacy drivers. For an atomic |
| * version look at drm_atomic_helper_shutdown(). |
| * |
| * Returns: |
| * Zero on success, error code on failure. |
| */ |
| int drm_crtc_force_disable_all(struct drm_device *dev) |
| { |
| struct drm_crtc *crtc; |
| int ret = 0; |
| |
| drm_modeset_lock_all(dev); |
| drm_for_each_crtc(crtc, dev) |
| if (crtc->enabled) { |
| ret = drm_crtc_force_disable(crtc); |
| if (ret) |
| goto out; |
| } |
| out: |
| drm_modeset_unlock_all(dev); |
| return ret; |
| } |
| EXPORT_SYMBOL(drm_crtc_force_disable_all); |
| |
| static unsigned int drm_num_crtcs(struct drm_device *dev) |
| { |
| unsigned int num = 0; |
| struct drm_crtc *tmp; |
| |
| drm_for_each_crtc(tmp, dev) { |
| num++; |
| } |
| |
| return num; |
| } |
| |
| int drm_crtc_register_all(struct drm_device *dev) |
| { |
| struct drm_crtc *crtc; |
| int ret = 0; |
| |
| drm_for_each_crtc(crtc, dev) { |
| if (drm_debugfs_crtc_add(crtc)) |
| DRM_ERROR("Failed to initialize debugfs entry for CRTC '%s'.\n", |
| crtc->name); |
| |
| if (crtc->funcs->late_register) |
| ret = crtc->funcs->late_register(crtc); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| void drm_crtc_unregister_all(struct drm_device *dev) |
| { |
| struct drm_crtc *crtc; |
| |
| drm_for_each_crtc(crtc, dev) { |
| if (crtc->funcs->early_unregister) |
| crtc->funcs->early_unregister(crtc); |
| drm_debugfs_crtc_remove(crtc); |
| } |
| } |
| |
| static int drm_crtc_crc_init(struct drm_crtc *crtc) |
| { |
| #ifdef CONFIG_DEBUG_FS |
| spin_lock_init(&crtc->crc.lock); |
| init_waitqueue_head(&crtc->crc.wq); |
| crtc->crc.source = kstrdup("auto", GFP_KERNEL); |
| if (!crtc->crc.source) |
| return -ENOMEM; |
| #endif |
| return 0; |
| } |
| |
| static void drm_crtc_crc_fini(struct drm_crtc *crtc) |
| { |
| #ifdef CONFIG_DEBUG_FS |
| kfree(crtc->crc.source); |
| #endif |
| } |
| |
| static const struct dma_fence_ops drm_crtc_fence_ops; |
| |
| static struct drm_crtc *fence_to_crtc(struct dma_fence *fence) |
| { |
| BUG_ON(fence->ops != &drm_crtc_fence_ops); |
| return container_of(fence->lock, struct drm_crtc, fence_lock); |
| } |
| |
| static const char *drm_crtc_fence_get_driver_name(struct dma_fence *fence) |
| { |
| struct drm_crtc *crtc = fence_to_crtc(fence); |
| |
| return crtc->dev->driver->name; |
| } |
| |
| static const char *drm_crtc_fence_get_timeline_name(struct dma_fence *fence) |
| { |
| struct drm_crtc *crtc = fence_to_crtc(fence); |
| |
| return crtc->timeline_name; |
| } |
| |
| static bool drm_crtc_fence_enable_signaling(struct dma_fence *fence) |
| { |
| return true; |
| } |
| |
| static const struct dma_fence_ops drm_crtc_fence_ops = { |
| .get_driver_name = drm_crtc_fence_get_driver_name, |
| .get_timeline_name = drm_crtc_fence_get_timeline_name, |
| .enable_signaling = drm_crtc_fence_enable_signaling, |
| .wait = dma_fence_default_wait, |
| }; |
| |
| struct dma_fence *drm_crtc_create_fence(struct drm_crtc *crtc) |
| { |
| struct dma_fence *fence; |
| |
| fence = kzalloc(sizeof(*fence), GFP_KERNEL); |
| if (!fence) |
| return NULL; |
| |
| dma_fence_init(fence, &drm_crtc_fence_ops, &crtc->fence_lock, |
| crtc->fence_context, ++crtc->fence_seqno); |
| |
| return fence; |
| } |
| |
| /** |
| * drm_crtc_init_with_planes - Initialise a new CRTC object with |
| * specified primary and cursor planes. |
| * @dev: DRM device |
| * @crtc: CRTC object to init |
| * @primary: Primary plane for CRTC |
| * @cursor: Cursor plane for CRTC |
| * @funcs: callbacks for the new CRTC |
| * @name: printf style format string for the CRTC name, or NULL for default name |
| * |
| * Inits a new object created as base part of a driver crtc object. Drivers |
| * should use this function instead of drm_crtc_init(), which is only provided |
| * for backwards compatibility with drivers which do not yet support universal |
| * planes). For really simple hardware which has only 1 plane look at |
| * drm_simple_display_pipe_init() instead. |
| * |
| * Returns: |
| * Zero on success, error code on failure. |
| */ |
| int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, |
| struct drm_plane *primary, |
| struct drm_plane *cursor, |
| const struct drm_crtc_funcs *funcs, |
| const char *name, ...) |
| { |
| struct drm_mode_config *config = &dev->mode_config; |
| int ret; |
| |
| WARN_ON(primary && primary->type != DRM_PLANE_TYPE_PRIMARY); |
| WARN_ON(cursor && cursor->type != DRM_PLANE_TYPE_CURSOR); |
| |
| /* crtc index is used with 32bit bitmasks */ |
| if (WARN_ON(config->num_crtc >= 32)) |
| return -EINVAL; |
| |
| crtc->dev = dev; |
| crtc->funcs = funcs; |
| |
| INIT_LIST_HEAD(&crtc->commit_list); |
| spin_lock_init(&crtc->commit_lock); |
| |
| drm_modeset_lock_init(&crtc->mutex); |
| ret = drm_mode_object_add(dev, &crtc->base, DRM_MODE_OBJECT_CRTC); |
| if (ret) |
| return ret; |
| |
| if (name) { |
| va_list ap; |
| |
| va_start(ap, name); |
| crtc->name = kvasprintf(GFP_KERNEL, name, ap); |
| va_end(ap); |
| } else { |
| crtc->name = kasprintf(GFP_KERNEL, "crtc-%d", |
| drm_num_crtcs(dev)); |
| } |
| if (!crtc->name) { |
| drm_mode_object_unregister(dev, &crtc->base); |
| return -ENOMEM; |
| } |
| |
| crtc->fence_context = dma_fence_context_alloc(1); |
| spin_lock_init(&crtc->fence_lock); |
| snprintf(crtc->timeline_name, sizeof(crtc->timeline_name), |
| "CRTC:%d-%s", crtc->base.id, crtc->name); |
| |
| crtc->base.properties = &crtc->properties; |
| |
| list_add_tail(&crtc->head, &config->crtc_list); |
| crtc->index = config->num_crtc++; |
| |
| crtc->primary = primary; |
| crtc->cursor = cursor; |
| if (primary && !primary->possible_crtcs) |
| primary->possible_crtcs = 1 << drm_crtc_index(crtc); |
| if (cursor && !cursor->possible_crtcs) |
| cursor->possible_crtcs = 1 << drm_crtc_index(crtc); |
| |
| ret = drm_crtc_crc_init(crtc); |
| if (ret) { |
| drm_mode_object_unregister(dev, &crtc->base); |
| return ret; |
| } |
| |
| if (drm_core_check_feature(dev, DRIVER_ATOMIC)) { |
| drm_object_attach_property(&crtc->base, config->prop_active, 0); |
| drm_object_attach_property(&crtc->base, config->prop_mode_id, 0); |
| drm_object_attach_property(&crtc->base, |
| config->prop_out_fence_ptr, 0); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(drm_crtc_init_with_planes); |
| |
| /** |
| * drm_crtc_cleanup - Clean up the core crtc usage |
| * @crtc: CRTC to cleanup |
| * |
| * This function cleans up @crtc and removes it from the DRM mode setting |
| * core. Note that the function does *not* free the crtc structure itself, |
| * this is the responsibility of the caller. |
| */ |
| void drm_crtc_cleanup(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| |
| /* Note that the crtc_list is considered to be static; should we |
| * remove the drm_crtc at runtime we would have to decrement all |
| * the indices on the drm_crtc after us in the crtc_list. |
| */ |
| |
| drm_crtc_crc_fini(crtc); |
| |
| kfree(crtc->gamma_store); |
| crtc->gamma_store = NULL; |
| |
| drm_modeset_lock_fini(&crtc->mutex); |
| |
| drm_mode_object_unregister(dev, &crtc->base); |
| list_del(&crtc->head); |
| dev->mode_config.num_crtc--; |
| |
| WARN_ON(crtc->state && !crtc->funcs->atomic_destroy_state); |
| if (crtc->state && crtc->funcs->atomic_destroy_state) |
| crtc->funcs->atomic_destroy_state(crtc, crtc->state); |
| |
| kfree(crtc->name); |
| |
| memset(crtc, 0, sizeof(*crtc)); |
| } |
| EXPORT_SYMBOL(drm_crtc_cleanup); |
| |
| /** |
| * drm_mode_getcrtc - get CRTC configuration |
| * @dev: drm device for the ioctl |
| * @data: data pointer for the ioctl |
| * @file_priv: drm file for the ioctl call |
| * |
| * Construct a CRTC configuration structure to return to the user. |
| * |
| * Called by the user via ioctl. |
| * |
| * Returns: |
| * Zero on success, negative errno on failure. |
| */ |
| int drm_mode_getcrtc(struct drm_device *dev, |
| void *data, struct drm_file *file_priv) |
| { |
| struct drm_mode_crtc *crtc_resp = data; |
| struct drm_crtc *crtc; |
| struct drm_plane *plane; |
| |
| if (!drm_core_check_feature(dev, DRIVER_MODESET)) |
| return -EINVAL; |
| |
| crtc = drm_crtc_find(dev, file_priv, crtc_resp->crtc_id); |
| if (!crtc) |
| return -ENOENT; |
| |
| plane = crtc->primary; |
| |
| crtc_resp->gamma_size = crtc->gamma_size; |
| |
| drm_modeset_lock(&plane->mutex, NULL); |
| if (plane->state && plane->state->fb) |
| crtc_resp->fb_id = plane->state->fb->base.id; |
| else if (!plane->state && plane->fb) |
| crtc_resp->fb_id = plane->fb->base.id; |
| else |
| crtc_resp->fb_id = 0; |
| |
| if (plane->state) { |
| crtc_resp->x = plane->state->src_x >> 16; |
| crtc_resp->y = plane->state->src_y >> 16; |
| } |
| drm_modeset_unlock(&plane->mutex); |
| |
| drm_modeset_lock(&crtc->mutex, NULL); |
| if (crtc->state) { |
| if (crtc->state->enable) { |
| drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->state->mode); |
| crtc_resp->mode_valid = 1; |
| } else { |
| crtc_resp->mode_valid = 0; |
| } |
| } else { |
| crtc_resp->x = crtc->x; |
| crtc_resp->y = crtc->y; |
| |
| if (crtc->enabled) { |
| drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->mode); |
| crtc_resp->mode_valid = 1; |
| |
| } else { |
| crtc_resp->mode_valid = 0; |
| } |
| } |
| if (!file_priv->aspect_ratio_allowed) |
| crtc_resp->mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK; |
| drm_modeset_unlock(&crtc->mutex); |
| |
| return 0; |
| } |
| |
| static int __drm_mode_set_config_internal(struct drm_mode_set *set, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct drm_crtc *crtc = set->crtc; |
| struct drm_framebuffer *fb; |
| struct drm_crtc *tmp; |
| int ret; |
| |
| /* |
| * NOTE: ->set_config can also disable other crtcs (if we steal all |
| * connectors from it), hence we need to refcount the fbs across all |
| * crtcs. Atomic modeset will have saner semantics ... |
| */ |
| drm_for_each_crtc(tmp, crtc->dev) |
| tmp->primary->old_fb = tmp->primary->fb; |
| |
| fb = set->fb; |
| |
| ret = crtc->funcs->set_config(set, ctx); |
| if (ret == 0) { |
| crtc->primary->crtc = fb ? crtc : NULL; |
| crtc->primary->fb = fb; |
| } |
| |
| drm_for_each_crtc(tmp, crtc->dev) { |
| if (tmp->primary->fb) |
| drm_framebuffer_get(tmp->primary->fb); |
| if (tmp->primary->old_fb) |
| drm_framebuffer_put(tmp->primary->old_fb); |
| tmp->primary->old_fb = NULL; |
| } |
| |
| return ret; |
| } |
| /** |
| * drm_mode_set_config_internal - helper to call &drm_mode_config_funcs.set_config |
| * @set: modeset config to set |
| * |
| * This is a little helper to wrap internal calls to the |
| * &drm_mode_config_funcs.set_config driver interface. The only thing it adds is |
| * correct refcounting dance. |
| * |
| * This should only be used by non-atomic legacy drivers. |
| * |
| * Returns: |
| * Zero on success, negative errno on failure. |
| */ |
| int drm_mode_set_config_internal(struct drm_mode_set *set) |
| { |
| WARN_ON(drm_drv_uses_atomic_modeset(set->crtc->dev)); |
| |
| return __drm_mode_set_config_internal(set, NULL); |
| } |
| EXPORT_SYMBOL(drm_mode_set_config_internal); |
| |
| /** |
| * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the |
| * CRTC viewport |
| * @crtc: CRTC that framebuffer will be displayed on |
| * @x: x panning |
| * @y: y panning |
| * @mode: mode that framebuffer will be displayed under |
| * @fb: framebuffer to check size of |
| */ |
| int drm_crtc_check_viewport(const struct drm_crtc *crtc, |
| int x, int y, |
| const struct drm_display_mode *mode, |
| const struct drm_framebuffer *fb) |
| |
| { |
| int hdisplay, vdisplay; |
| |
| drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay); |
| |
| if (crtc->state && |
| drm_rotation_90_or_270(crtc->primary->state->rotation)) |
| swap(hdisplay, vdisplay); |
| |
| return drm_framebuffer_check_src_coords(x << 16, y << 16, |
| hdisplay << 16, vdisplay << 16, |
| fb); |
| } |
| EXPORT_SYMBOL(drm_crtc_check_viewport); |
| |
| /** |
| * drm_mode_setcrtc - set CRTC configuration |
| * @dev: drm device for the ioctl |
| * @data: data pointer for the ioctl |
| * @file_priv: drm file for the ioctl call |
| * |
| * Build a new CRTC configuration based on user request. |
| * |
| * Called by the user via ioctl. |
| * |
| * Returns: |
| * Zero on success, negative errno on failure. |
| */ |
| int drm_mode_setcrtc(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_mode_config *config = &dev->mode_config; |
| struct drm_mode_crtc *crtc_req = data; |
| struct drm_crtc *crtc; |
| struct drm_plane *plane; |
| struct drm_connector **connector_set = NULL, *connector; |
| struct drm_framebuffer *fb = NULL; |
| struct drm_display_mode *mode = NULL; |
| struct drm_mode_set set; |
| uint32_t __user *set_connectors_ptr; |
| struct drm_modeset_acquire_ctx ctx; |
| int ret; |
| int i; |
| |
| if (!drm_core_check_feature(dev, DRIVER_MODESET)) |
| return -EINVAL; |
| |
| /* |
| * Universal plane src offsets are only 16.16, prevent havoc for |
| * drivers using universal plane code internally. |
| */ |
| if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000) |
| return -ERANGE; |
| |
| crtc = drm_crtc_find(dev, file_priv, crtc_req->crtc_id); |
| if (!crtc) { |
| DRM_DEBUG_KMS("Unknown CRTC ID %d\n", crtc_req->crtc_id); |
| return -ENOENT; |
| } |
| DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name); |
| |
| plane = crtc->primary; |
| |
| mutex_lock(&crtc->dev->mode_config.mutex); |
| drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE); |
| retry: |
| ret = drm_modeset_lock_all_ctx(crtc->dev, &ctx); |
| if (ret) |
| goto out; |
| |
| if (crtc_req->mode_valid) { |
| /* If we have a mode we need a framebuffer. */ |
| /* If we pass -1, set the mode with the currently bound fb */ |
| if (crtc_req->fb_id == -1) { |
| struct drm_framebuffer *old_fb; |
| |
| if (plane->state) |
| old_fb = plane->state->fb; |
| else |
| old_fb = plane->fb; |
| |
| if (!old_fb) { |
| DRM_DEBUG_KMS("CRTC doesn't have current FB\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| fb = old_fb; |
| /* Make refcounting symmetric with the lookup path. */ |
| drm_framebuffer_get(fb); |
| } else { |
| fb = drm_framebuffer_lookup(dev, file_priv, crtc_req->fb_id); |
| if (!fb) { |
| DRM_DEBUG_KMS("Unknown FB ID%d\n", |
| crtc_req->fb_id); |
| ret = -ENOENT; |
| goto out; |
| } |
| } |
| |
| mode = drm_mode_create(dev); |
| if (!mode) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| if (!file_priv->aspect_ratio_allowed && |
| (crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) != DRM_MODE_FLAG_PIC_AR_NONE) { |
| DRM_DEBUG_KMS("Unexpected aspect-ratio flag bits\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| |
| ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode); |
| if (ret) { |
| DRM_DEBUG_KMS("Invalid mode\n"); |
| goto out; |
| } |
| |
| /* |
| * Check whether the primary plane supports the fb pixel format. |
| * Drivers not implementing the universal planes API use a |
| * default formats list provided by the DRM core which doesn't |
| * match real hardware capabilities. Skip the check in that |
| * case. |
| */ |
| if (!plane->format_default) { |
| ret = drm_plane_check_pixel_format(plane, |
| fb->format->format, |
| fb->modifier); |
| if (ret) { |
| struct drm_format_name_buf format_name; |
| DRM_DEBUG_KMS("Invalid pixel format %s, modifier 0x%llx\n", |
| drm_get_format_name(fb->format->format, |
| &format_name), |
| fb->modifier); |
| goto out; |
| } |
| } |
| |
| ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y, |
| mode, fb); |
| if (ret) |
| goto out; |
| |
| } |
| |
| if (crtc_req->count_connectors == 0 && mode) { |
| DRM_DEBUG_KMS("Count connectors is 0 but mode set\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (crtc_req->count_connectors > 0 && (!mode || !fb)) { |
| DRM_DEBUG_KMS("Count connectors is %d but no mode or fb set\n", |
| crtc_req->count_connectors); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (crtc_req->count_connectors > 0) { |
| u32 out_id; |
| |
| /* Avoid unbounded kernel memory allocation */ |
| if (crtc_req->count_connectors > config->num_connector) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| connector_set = kmalloc_array(crtc_req->count_connectors, |
| sizeof(struct drm_connector *), |
| GFP_KERNEL); |
| if (!connector_set) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| for (i = 0; i < crtc_req->count_connectors; i++) { |
| connector_set[i] = NULL; |
| set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr; |
| if (get_user(out_id, &set_connectors_ptr[i])) { |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| connector = drm_connector_lookup(dev, file_priv, out_id); |
| if (!connector) { |
| DRM_DEBUG_KMS("Connector id %d unknown\n", |
| out_id); |
| ret = -ENOENT; |
| goto out; |
| } |
| DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", |
| connector->base.id, |
| connector->name); |
| |
| connector_set[i] = connector; |
| } |
| } |
| |
| set.crtc = crtc; |
| set.x = crtc_req->x; |
| set.y = crtc_req->y; |
| set.mode = mode; |
| set.connectors = connector_set; |
| set.num_connectors = crtc_req->count_connectors; |
| set.fb = fb; |
| ret = __drm_mode_set_config_internal(&set, &ctx); |
| |
| out: |
| if (fb) |
| drm_framebuffer_put(fb); |
| |
| if (connector_set) { |
| for (i = 0; i < crtc_req->count_connectors; i++) { |
| if (connector_set[i]) |
| drm_connector_put(connector_set[i]); |
| } |
| } |
| kfree(connector_set); |
| drm_mode_destroy(dev, mode); |
| if (ret == -EDEADLK) { |
| ret = drm_modeset_backoff(&ctx); |
| if (!ret) |
| goto retry; |
| } |
| drm_modeset_drop_locks(&ctx); |
| drm_modeset_acquire_fini(&ctx); |
| mutex_unlock(&crtc->dev->mode_config.mutex); |
| |
| return ret; |
| } |
| |
| int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj, |
| struct drm_property *property, |
| uint64_t value) |
| { |
| int ret = -EINVAL; |
| struct drm_crtc *crtc = obj_to_crtc(obj); |
| |
| if (crtc->funcs->set_property) |
| ret = crtc->funcs->set_property(crtc, property, value); |
| if (!ret) |
| drm_object_property_set_value(obj, property, value); |
| |
| return ret; |
| } |