| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // Copyright (C) 2014 Freescale Semiconductor, Inc. |
| |
| /dts-v1/; |
| |
| #include "imx6sx.dtsi" |
| |
| / { |
| model = "Freescale i.MX6 SoloX Sabre Auto Board"; |
| compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx"; |
| |
| memory@80000000 { |
| reg = <0x80000000 0x80000000>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_led>; |
| |
| user { |
| label = "debug"; |
| gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| |
| vcc_sd3: regulator-vcc-sd3 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_vcc_sd3>; |
| regulator-name = "VCC_SD3"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| }; |
| |
| &anaclk2 { |
| clock-frequency = <24576000>; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet1>; |
| phy-mode = "rgmii"; |
| phy-handle = <ðphy1>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0>; |
| }; |
| |
| ethphy1: ethernet-phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| &fec2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet2>; |
| phy-mode = "rgmii"; |
| phy-handle = <ðphy0>; |
| fsl,magic-packet; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| bus-width = <8>; |
| cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; |
| keep-power-in-suspend; |
| wakeup-source; |
| vmmc-supply = <&vcc_sd3>; |
| status = "okay"; |
| }; |
| |
| &usdhc4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc4>; |
| bus-width = <8>; |
| cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; |
| no-1-8-v; |
| keep-power-in-suspend; |
| wakeup-source; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_egalax_int: egalax-intgrp { |
| fsl,pins = < |
| MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22 0x10b0 |
| >; |
| }; |
| |
| pinctrl_enet1: enet1grp { |
| fsl,pins = < |
| MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 |
| MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 |
| MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b9 |
| MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 |
| MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 |
| MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 |
| MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 |
| MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 |
| MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 |
| MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 |
| MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 |
| MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 |
| MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 |
| MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 |
| >; |
| }; |
| |
| pinctrl_enet2: enet2grp { |
| fsl,pins = < |
| MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 |
| MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 |
| MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 |
| MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 |
| MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 |
| MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 |
| MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 |
| MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 |
| MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 |
| MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 |
| MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 |
| MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1 |
| MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1 |
| MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_led: ledgrp { |
| fsl,pins = < |
| MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 |
| MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 |
| MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 |
| MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 |
| MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 |
| MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 |
| MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 |
| MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 |
| MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 |
| MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 |
| MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 |
| MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ |
| MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { |
| fsl,pins = < |
| MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 |
| MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 |
| MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 |
| MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 |
| MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 |
| MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 |
| MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 |
| MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 |
| MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 |
| MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { |
| fsl,pins = < |
| MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 |
| MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 |
| MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 |
| MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 |
| MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 |
| MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 |
| MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 |
| MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 |
| MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 |
| MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 |
| >; |
| }; |
| |
| pinctrl_usdhc4: usdhc4grp { |
| fsl,pins = < |
| MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 |
| MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 |
| MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 |
| MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 |
| MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 |
| MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 |
| MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ |
| MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ |
| >; |
| }; |
| |
| pinctrl_vcc_sd3: vccsd3grp { |
| fsl,pins = < |
| MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0 |
| >; |
| }; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| |
| touchscreen@4 { |
| compatible = "eeti,egalax_ts"; |
| reg = <0x04>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_egalax_int>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <22 IRQ_TYPE_EDGE_FALLING>; |
| wakeup-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| pfuze100: pmic@8 { |
| compatible = "fsl,pfuze100"; |
| reg = <0x08>; |
| |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw1c_reg: sw1c { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3a { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3b_reg: sw3b { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw4_reg: sw4 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vgen1 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| regulator-always-on; |
| }; |
| |
| vgen2_reg: vgen2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen3_reg: vgen3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| max7322: gpio@68 { |
| compatible = "maxim,max7322"; |
| reg = <0x68>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| |
| max7310_a: gpio@30 { |
| compatible = "maxim,max7310"; |
| reg = <0x30>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| max7310_b: gpio@32 { |
| compatible = "maxim,max7310"; |
| reg = <0x32>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| }; |
