|  | /* | 
|  | * This file is part of UBIFS. | 
|  | * | 
|  | * Copyright (C) 2006-2008 Nokia Corporation. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of the GNU General Public License version 2 as published by | 
|  | * the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., 51 | 
|  | * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | 
|  | * | 
|  | * Authors: Artem Bityutskiy (Битюцкий Артём) | 
|  | *          Adrian Hunter | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * This file implements UBIFS initialization and VFS superblock operations. Some | 
|  | * initialization stuff which is rather large and complex is placed at | 
|  | * corresponding subsystems, but most of it is here. | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <linux/parser.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/mount.h> | 
|  | #include <linux/math64.h> | 
|  | #include <linux/writeback.h> | 
|  | #include "ubifs.h" | 
|  |  | 
|  | /* | 
|  | * Maximum amount of memory we may 'kmalloc()' without worrying that we are | 
|  | * allocating too much. | 
|  | */ | 
|  | #define UBIFS_KMALLOC_OK (128*1024) | 
|  |  | 
|  | /* Slab cache for UBIFS inodes */ | 
|  | struct kmem_cache *ubifs_inode_slab; | 
|  |  | 
|  | /* UBIFS TNC shrinker description */ | 
|  | static struct shrinker ubifs_shrinker_info = { | 
|  | .shrink = ubifs_shrinker, | 
|  | .seeks = DEFAULT_SEEKS, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * validate_inode - validate inode. | 
|  | * @c: UBIFS file-system description object | 
|  | * @inode: the inode to validate | 
|  | * | 
|  | * This is a helper function for 'ubifs_iget()' which validates various fields | 
|  | * of a newly built inode to make sure they contain sane values and prevent | 
|  | * possible vulnerabilities. Returns zero if the inode is all right and | 
|  | * a non-zero error code if not. | 
|  | */ | 
|  | static int validate_inode(struct ubifs_info *c, const struct inode *inode) | 
|  | { | 
|  | int err; | 
|  | const struct ubifs_inode *ui = ubifs_inode(inode); | 
|  |  | 
|  | if (inode->i_size > c->max_inode_sz) { | 
|  | ubifs_err("inode is too large (%lld)", | 
|  | (long long)inode->i_size); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (ui->compr_type < 0 || ui->compr_type >= UBIFS_COMPR_TYPES_CNT) { | 
|  | ubifs_err("unknown compression type %d", ui->compr_type); | 
|  | return 2; | 
|  | } | 
|  |  | 
|  | if (ui->xattr_names + ui->xattr_cnt > XATTR_LIST_MAX) | 
|  | return 3; | 
|  |  | 
|  | if (ui->data_len < 0 || ui->data_len > UBIFS_MAX_INO_DATA) | 
|  | return 4; | 
|  |  | 
|  | if (ui->xattr && (inode->i_mode & S_IFMT) != S_IFREG) | 
|  | return 5; | 
|  |  | 
|  | if (!ubifs_compr_present(ui->compr_type)) { | 
|  | ubifs_warn("inode %lu uses '%s' compression, but it was not " | 
|  | "compiled in", inode->i_ino, | 
|  | ubifs_compr_name(ui->compr_type)); | 
|  | } | 
|  |  | 
|  | err = dbg_check_dir_size(c, inode); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | struct inode *ubifs_iget(struct super_block *sb, unsigned long inum) | 
|  | { | 
|  | int err; | 
|  | union ubifs_key key; | 
|  | struct ubifs_ino_node *ino; | 
|  | struct ubifs_info *c = sb->s_fs_info; | 
|  | struct inode *inode; | 
|  | struct ubifs_inode *ui; | 
|  |  | 
|  | dbg_gen("inode %lu", inum); | 
|  |  | 
|  | inode = iget_locked(sb, inum); | 
|  | if (!inode) | 
|  | return ERR_PTR(-ENOMEM); | 
|  | if (!(inode->i_state & I_NEW)) | 
|  | return inode; | 
|  | ui = ubifs_inode(inode); | 
|  |  | 
|  | ino = kmalloc(UBIFS_MAX_INO_NODE_SZ, GFP_NOFS); | 
|  | if (!ino) { | 
|  | err = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ino_key_init(c, &key, inode->i_ino); | 
|  |  | 
|  | err = ubifs_tnc_lookup(c, &key, ino); | 
|  | if (err) | 
|  | goto out_ino; | 
|  |  | 
|  | inode->i_flags |= (S_NOCMTIME | S_NOATIME); | 
|  | inode->i_nlink = le32_to_cpu(ino->nlink); | 
|  | inode->i_uid   = le32_to_cpu(ino->uid); | 
|  | inode->i_gid   = le32_to_cpu(ino->gid); | 
|  | inode->i_atime.tv_sec  = (int64_t)le64_to_cpu(ino->atime_sec); | 
|  | inode->i_atime.tv_nsec = le32_to_cpu(ino->atime_nsec); | 
|  | inode->i_mtime.tv_sec  = (int64_t)le64_to_cpu(ino->mtime_sec); | 
|  | inode->i_mtime.tv_nsec = le32_to_cpu(ino->mtime_nsec); | 
|  | inode->i_ctime.tv_sec  = (int64_t)le64_to_cpu(ino->ctime_sec); | 
|  | inode->i_ctime.tv_nsec = le32_to_cpu(ino->ctime_nsec); | 
|  | inode->i_mode = le32_to_cpu(ino->mode); | 
|  | inode->i_size = le64_to_cpu(ino->size); | 
|  |  | 
|  | ui->data_len    = le32_to_cpu(ino->data_len); | 
|  | ui->flags       = le32_to_cpu(ino->flags); | 
|  | ui->compr_type  = le16_to_cpu(ino->compr_type); | 
|  | ui->creat_sqnum = le64_to_cpu(ino->creat_sqnum); | 
|  | ui->xattr_cnt   = le32_to_cpu(ino->xattr_cnt); | 
|  | ui->xattr_size  = le32_to_cpu(ino->xattr_size); | 
|  | ui->xattr_names = le32_to_cpu(ino->xattr_names); | 
|  | ui->synced_i_size = ui->ui_size = inode->i_size; | 
|  |  | 
|  | ui->xattr = (ui->flags & UBIFS_XATTR_FL) ? 1 : 0; | 
|  |  | 
|  | err = validate_inode(c, inode); | 
|  | if (err) | 
|  | goto out_invalid; | 
|  |  | 
|  | /* Disable read-ahead */ | 
|  | inode->i_mapping->backing_dev_info = &c->bdi; | 
|  |  | 
|  | switch (inode->i_mode & S_IFMT) { | 
|  | case S_IFREG: | 
|  | inode->i_mapping->a_ops = &ubifs_file_address_operations; | 
|  | inode->i_op = &ubifs_file_inode_operations; | 
|  | inode->i_fop = &ubifs_file_operations; | 
|  | if (ui->xattr) { | 
|  | ui->data = kmalloc(ui->data_len + 1, GFP_NOFS); | 
|  | if (!ui->data) { | 
|  | err = -ENOMEM; | 
|  | goto out_ino; | 
|  | } | 
|  | memcpy(ui->data, ino->data, ui->data_len); | 
|  | ((char *)ui->data)[ui->data_len] = '\0'; | 
|  | } else if (ui->data_len != 0) { | 
|  | err = 10; | 
|  | goto out_invalid; | 
|  | } | 
|  | break; | 
|  | case S_IFDIR: | 
|  | inode->i_op  = &ubifs_dir_inode_operations; | 
|  | inode->i_fop = &ubifs_dir_operations; | 
|  | if (ui->data_len != 0) { | 
|  | err = 11; | 
|  | goto out_invalid; | 
|  | } | 
|  | break; | 
|  | case S_IFLNK: | 
|  | inode->i_op = &ubifs_symlink_inode_operations; | 
|  | if (ui->data_len <= 0 || ui->data_len > UBIFS_MAX_INO_DATA) { | 
|  | err = 12; | 
|  | goto out_invalid; | 
|  | } | 
|  | ui->data = kmalloc(ui->data_len + 1, GFP_NOFS); | 
|  | if (!ui->data) { | 
|  | err = -ENOMEM; | 
|  | goto out_ino; | 
|  | } | 
|  | memcpy(ui->data, ino->data, ui->data_len); | 
|  | ((char *)ui->data)[ui->data_len] = '\0'; | 
|  | break; | 
|  | case S_IFBLK: | 
|  | case S_IFCHR: | 
|  | { | 
|  | dev_t rdev; | 
|  | union ubifs_dev_desc *dev; | 
|  |  | 
|  | ui->data = kmalloc(sizeof(union ubifs_dev_desc), GFP_NOFS); | 
|  | if (!ui->data) { | 
|  | err = -ENOMEM; | 
|  | goto out_ino; | 
|  | } | 
|  |  | 
|  | dev = (union ubifs_dev_desc *)ino->data; | 
|  | if (ui->data_len == sizeof(dev->new)) | 
|  | rdev = new_decode_dev(le32_to_cpu(dev->new)); | 
|  | else if (ui->data_len == sizeof(dev->huge)) | 
|  | rdev = huge_decode_dev(le64_to_cpu(dev->huge)); | 
|  | else { | 
|  | err = 13; | 
|  | goto out_invalid; | 
|  | } | 
|  | memcpy(ui->data, ino->data, ui->data_len); | 
|  | inode->i_op = &ubifs_file_inode_operations; | 
|  | init_special_inode(inode, inode->i_mode, rdev); | 
|  | break; | 
|  | } | 
|  | case S_IFSOCK: | 
|  | case S_IFIFO: | 
|  | inode->i_op = &ubifs_file_inode_operations; | 
|  | init_special_inode(inode, inode->i_mode, 0); | 
|  | if (ui->data_len != 0) { | 
|  | err = 14; | 
|  | goto out_invalid; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | err = 15; | 
|  | goto out_invalid; | 
|  | } | 
|  |  | 
|  | kfree(ino); | 
|  | ubifs_set_inode_flags(inode); | 
|  | unlock_new_inode(inode); | 
|  | return inode; | 
|  |  | 
|  | out_invalid: | 
|  | ubifs_err("inode %lu validation failed, error %d", inode->i_ino, err); | 
|  | dbg_dump_node(c, ino); | 
|  | dbg_dump_inode(c, inode); | 
|  | err = -EINVAL; | 
|  | out_ino: | 
|  | kfree(ino); | 
|  | out: | 
|  | ubifs_err("failed to read inode %lu, error %d", inode->i_ino, err); | 
|  | iget_failed(inode); | 
|  | return ERR_PTR(err); | 
|  | } | 
|  |  | 
|  | static struct inode *ubifs_alloc_inode(struct super_block *sb) | 
|  | { | 
|  | struct ubifs_inode *ui; | 
|  |  | 
|  | ui = kmem_cache_alloc(ubifs_inode_slab, GFP_NOFS); | 
|  | if (!ui) | 
|  | return NULL; | 
|  |  | 
|  | memset((void *)ui + sizeof(struct inode), 0, | 
|  | sizeof(struct ubifs_inode) - sizeof(struct inode)); | 
|  | mutex_init(&ui->ui_mutex); | 
|  | spin_lock_init(&ui->ui_lock); | 
|  | return &ui->vfs_inode; | 
|  | }; | 
|  |  | 
|  | static void ubifs_destroy_inode(struct inode *inode) | 
|  | { | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  |  | 
|  | kfree(ui->data); | 
|  | kmem_cache_free(ubifs_inode_slab, inode); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Note, Linux write-back code calls this without 'i_mutex'. | 
|  | */ | 
|  | static int ubifs_write_inode(struct inode *inode, struct writeback_control *wbc) | 
|  | { | 
|  | int err = 0; | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  |  | 
|  | ubifs_assert(!ui->xattr); | 
|  | if (is_bad_inode(inode)) | 
|  | return 0; | 
|  |  | 
|  | mutex_lock(&ui->ui_mutex); | 
|  | /* | 
|  | * Due to races between write-back forced by budgeting | 
|  | * (see 'sync_some_inodes()') and pdflush write-back, the inode may | 
|  | * have already been synchronized, do not do this again. This might | 
|  | * also happen if it was synchronized in an VFS operation, e.g. | 
|  | * 'ubifs_link()'. | 
|  | */ | 
|  | if (!ui->dirty) { | 
|  | mutex_unlock(&ui->ui_mutex); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * As an optimization, do not write orphan inodes to the media just | 
|  | * because this is not needed. | 
|  | */ | 
|  | dbg_gen("inode %lu, mode %#x, nlink %u", | 
|  | inode->i_ino, (int)inode->i_mode, inode->i_nlink); | 
|  | if (inode->i_nlink) { | 
|  | err = ubifs_jnl_write_inode(c, inode); | 
|  | if (err) | 
|  | ubifs_err("can't write inode %lu, error %d", | 
|  | inode->i_ino, err); | 
|  | else | 
|  | err = dbg_check_inode_size(c, inode, ui->ui_size); | 
|  | } | 
|  |  | 
|  | ui->dirty = 0; | 
|  | mutex_unlock(&ui->ui_mutex); | 
|  | ubifs_release_dirty_inode_budget(c, ui); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void ubifs_evict_inode(struct inode *inode) | 
|  | { | 
|  | int err; | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  |  | 
|  | if (ui->xattr) | 
|  | /* | 
|  | * Extended attribute inode deletions are fully handled in | 
|  | * 'ubifs_removexattr()'. These inodes are special and have | 
|  | * limited usage, so there is nothing to do here. | 
|  | */ | 
|  | goto out; | 
|  |  | 
|  | dbg_gen("inode %lu, mode %#x", inode->i_ino, (int)inode->i_mode); | 
|  | ubifs_assert(!atomic_read(&inode->i_count)); | 
|  |  | 
|  | truncate_inode_pages(&inode->i_data, 0); | 
|  |  | 
|  | if (inode->i_nlink) | 
|  | goto done; | 
|  |  | 
|  | if (is_bad_inode(inode)) | 
|  | goto out; | 
|  |  | 
|  | ui->ui_size = inode->i_size = 0; | 
|  | err = ubifs_jnl_delete_inode(c, inode); | 
|  | if (err) | 
|  | /* | 
|  | * Worst case we have a lost orphan inode wasting space, so a | 
|  | * simple error message is OK here. | 
|  | */ | 
|  | ubifs_err("can't delete inode %lu, error %d", | 
|  | inode->i_ino, err); | 
|  |  | 
|  | out: | 
|  | if (ui->dirty) | 
|  | ubifs_release_dirty_inode_budget(c, ui); | 
|  | else { | 
|  | /* We've deleted something - clean the "no space" flags */ | 
|  | c->nospace = c->nospace_rp = 0; | 
|  | smp_wmb(); | 
|  | } | 
|  | done: | 
|  | end_writeback(inode); | 
|  | } | 
|  |  | 
|  | static void ubifs_dirty_inode(struct inode *inode) | 
|  | { | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  |  | 
|  | ubifs_assert(mutex_is_locked(&ui->ui_mutex)); | 
|  | if (!ui->dirty) { | 
|  | ui->dirty = 1; | 
|  | dbg_gen("inode %lu",  inode->i_ino); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ubifs_statfs(struct dentry *dentry, struct kstatfs *buf) | 
|  | { | 
|  | struct ubifs_info *c = dentry->d_sb->s_fs_info; | 
|  | unsigned long long free; | 
|  | __le32 *uuid = (__le32 *)c->uuid; | 
|  |  | 
|  | free = ubifs_get_free_space(c); | 
|  | dbg_gen("free space %lld bytes (%lld blocks)", | 
|  | free, free >> UBIFS_BLOCK_SHIFT); | 
|  |  | 
|  | buf->f_type = UBIFS_SUPER_MAGIC; | 
|  | buf->f_bsize = UBIFS_BLOCK_SIZE; | 
|  | buf->f_blocks = c->block_cnt; | 
|  | buf->f_bfree = free >> UBIFS_BLOCK_SHIFT; | 
|  | if (free > c->report_rp_size) | 
|  | buf->f_bavail = (free - c->report_rp_size) >> UBIFS_BLOCK_SHIFT; | 
|  | else | 
|  | buf->f_bavail = 0; | 
|  | buf->f_files = 0; | 
|  | buf->f_ffree = 0; | 
|  | buf->f_namelen = UBIFS_MAX_NLEN; | 
|  | buf->f_fsid.val[0] = le32_to_cpu(uuid[0]) ^ le32_to_cpu(uuid[2]); | 
|  | buf->f_fsid.val[1] = le32_to_cpu(uuid[1]) ^ le32_to_cpu(uuid[3]); | 
|  | ubifs_assert(buf->f_bfree <= c->block_cnt); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ubifs_show_options(struct seq_file *s, struct vfsmount *mnt) | 
|  | { | 
|  | struct ubifs_info *c = mnt->mnt_sb->s_fs_info; | 
|  |  | 
|  | if (c->mount_opts.unmount_mode == 2) | 
|  | seq_printf(s, ",fast_unmount"); | 
|  | else if (c->mount_opts.unmount_mode == 1) | 
|  | seq_printf(s, ",norm_unmount"); | 
|  |  | 
|  | if (c->mount_opts.bulk_read == 2) | 
|  | seq_printf(s, ",bulk_read"); | 
|  | else if (c->mount_opts.bulk_read == 1) | 
|  | seq_printf(s, ",no_bulk_read"); | 
|  |  | 
|  | if (c->mount_opts.chk_data_crc == 2) | 
|  | seq_printf(s, ",chk_data_crc"); | 
|  | else if (c->mount_opts.chk_data_crc == 1) | 
|  | seq_printf(s, ",no_chk_data_crc"); | 
|  |  | 
|  | if (c->mount_opts.override_compr) { | 
|  | seq_printf(s, ",compr=%s", | 
|  | ubifs_compr_name(c->mount_opts.compr_type)); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ubifs_sync_fs(struct super_block *sb, int wait) | 
|  | { | 
|  | int i, err; | 
|  | struct ubifs_info *c = sb->s_fs_info; | 
|  |  | 
|  | /* | 
|  | * Zero @wait is just an advisory thing to help the file system shove | 
|  | * lots of data into the queues, and there will be the second | 
|  | * '->sync_fs()' call, with non-zero @wait. | 
|  | */ | 
|  | if (!wait) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * Synchronize write buffers, because 'ubifs_run_commit()' does not | 
|  | * do this if it waits for an already running commit. | 
|  | */ | 
|  | for (i = 0; i < c->jhead_cnt; i++) { | 
|  | err = ubifs_wbuf_sync(&c->jheads[i].wbuf); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Strictly speaking, it is not necessary to commit the journal here, | 
|  | * synchronizing write-buffers would be enough. But committing makes | 
|  | * UBIFS free space predictions much more accurate, so we want to let | 
|  | * the user be able to get more accurate results of 'statfs()' after | 
|  | * they synchronize the file system. | 
|  | */ | 
|  | err = ubifs_run_commit(c); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return ubi_sync(c->vi.ubi_num); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * init_constants_early - initialize UBIFS constants. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * This function initialize UBIFS constants which do not need the superblock to | 
|  | * be read. It also checks that the UBI volume satisfies basic UBIFS | 
|  | * requirements. Returns zero in case of success and a negative error code in | 
|  | * case of failure. | 
|  | */ | 
|  | static int init_constants_early(struct ubifs_info *c) | 
|  | { | 
|  | if (c->vi.corrupted) { | 
|  | ubifs_warn("UBI volume is corrupted - read-only mode"); | 
|  | c->ro_media = 1; | 
|  | } | 
|  |  | 
|  | if (c->di.ro_mode) { | 
|  | ubifs_msg("read-only UBI device"); | 
|  | c->ro_media = 1; | 
|  | } | 
|  |  | 
|  | if (c->vi.vol_type == UBI_STATIC_VOLUME) { | 
|  | ubifs_msg("static UBI volume - read-only mode"); | 
|  | c->ro_media = 1; | 
|  | } | 
|  |  | 
|  | c->leb_cnt = c->vi.size; | 
|  | c->leb_size = c->vi.usable_leb_size; | 
|  | c->half_leb_size = c->leb_size / 2; | 
|  | c->min_io_size = c->di.min_io_size; | 
|  | c->min_io_shift = fls(c->min_io_size) - 1; | 
|  |  | 
|  | if (c->leb_size < UBIFS_MIN_LEB_SZ) { | 
|  | ubifs_err("too small LEBs (%d bytes), min. is %d bytes", | 
|  | c->leb_size, UBIFS_MIN_LEB_SZ); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (c->leb_cnt < UBIFS_MIN_LEB_CNT) { | 
|  | ubifs_err("too few LEBs (%d), min. is %d", | 
|  | c->leb_cnt, UBIFS_MIN_LEB_CNT); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!is_power_of_2(c->min_io_size)) { | 
|  | ubifs_err("bad min. I/O size %d", c->min_io_size); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * UBIFS aligns all node to 8-byte boundary, so to make function in | 
|  | * io.c simpler, assume minimum I/O unit size to be 8 bytes if it is | 
|  | * less than 8. | 
|  | */ | 
|  | if (c->min_io_size < 8) { | 
|  | c->min_io_size = 8; | 
|  | c->min_io_shift = 3; | 
|  | } | 
|  |  | 
|  | c->ref_node_alsz = ALIGN(UBIFS_REF_NODE_SZ, c->min_io_size); | 
|  | c->mst_node_alsz = ALIGN(UBIFS_MST_NODE_SZ, c->min_io_size); | 
|  |  | 
|  | /* | 
|  | * Initialize node length ranges which are mostly needed for node | 
|  | * length validation. | 
|  | */ | 
|  | c->ranges[UBIFS_PAD_NODE].len  = UBIFS_PAD_NODE_SZ; | 
|  | c->ranges[UBIFS_SB_NODE].len   = UBIFS_SB_NODE_SZ; | 
|  | c->ranges[UBIFS_MST_NODE].len  = UBIFS_MST_NODE_SZ; | 
|  | c->ranges[UBIFS_REF_NODE].len  = UBIFS_REF_NODE_SZ; | 
|  | c->ranges[UBIFS_TRUN_NODE].len = UBIFS_TRUN_NODE_SZ; | 
|  | c->ranges[UBIFS_CS_NODE].len   = UBIFS_CS_NODE_SZ; | 
|  |  | 
|  | c->ranges[UBIFS_INO_NODE].min_len  = UBIFS_INO_NODE_SZ; | 
|  | c->ranges[UBIFS_INO_NODE].max_len  = UBIFS_MAX_INO_NODE_SZ; | 
|  | c->ranges[UBIFS_ORPH_NODE].min_len = | 
|  | UBIFS_ORPH_NODE_SZ + sizeof(__le64); | 
|  | c->ranges[UBIFS_ORPH_NODE].max_len = c->leb_size; | 
|  | c->ranges[UBIFS_DENT_NODE].min_len = UBIFS_DENT_NODE_SZ; | 
|  | c->ranges[UBIFS_DENT_NODE].max_len = UBIFS_MAX_DENT_NODE_SZ; | 
|  | c->ranges[UBIFS_XENT_NODE].min_len = UBIFS_XENT_NODE_SZ; | 
|  | c->ranges[UBIFS_XENT_NODE].max_len = UBIFS_MAX_XENT_NODE_SZ; | 
|  | c->ranges[UBIFS_DATA_NODE].min_len = UBIFS_DATA_NODE_SZ; | 
|  | c->ranges[UBIFS_DATA_NODE].max_len = UBIFS_MAX_DATA_NODE_SZ; | 
|  | /* | 
|  | * Minimum indexing node size is amended later when superblock is | 
|  | * read and the key length is known. | 
|  | */ | 
|  | c->ranges[UBIFS_IDX_NODE].min_len = UBIFS_IDX_NODE_SZ + UBIFS_BRANCH_SZ; | 
|  | /* | 
|  | * Maximum indexing node size is amended later when superblock is | 
|  | * read and the fanout is known. | 
|  | */ | 
|  | c->ranges[UBIFS_IDX_NODE].max_len = INT_MAX; | 
|  |  | 
|  | /* | 
|  | * Initialize dead and dark LEB space watermarks. See gc.c for comments | 
|  | * about these values. | 
|  | */ | 
|  | c->dead_wm = ALIGN(MIN_WRITE_SZ, c->min_io_size); | 
|  | c->dark_wm = ALIGN(UBIFS_MAX_NODE_SZ, c->min_io_size); | 
|  |  | 
|  | /* | 
|  | * Calculate how many bytes would be wasted at the end of LEB if it was | 
|  | * fully filled with data nodes of maximum size. This is used in | 
|  | * calculations when reporting free space. | 
|  | */ | 
|  | c->leb_overhead = c->leb_size % UBIFS_MAX_DATA_NODE_SZ; | 
|  |  | 
|  | /* Buffer size for bulk-reads */ | 
|  | c->max_bu_buf_len = UBIFS_MAX_BULK_READ * UBIFS_MAX_DATA_NODE_SZ; | 
|  | if (c->max_bu_buf_len > c->leb_size) | 
|  | c->max_bu_buf_len = c->leb_size; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bud_wbuf_callback - bud LEB write-buffer synchronization call-back. | 
|  | * @c: UBIFS file-system description object | 
|  | * @lnum: LEB the write-buffer was synchronized to | 
|  | * @free: how many free bytes left in this LEB | 
|  | * @pad: how many bytes were padded | 
|  | * | 
|  | * This is a callback function which is called by the I/O unit when the | 
|  | * write-buffer is synchronized. We need this to correctly maintain space | 
|  | * accounting in bud logical eraseblocks. This function returns zero in case of | 
|  | * success and a negative error code in case of failure. | 
|  | * | 
|  | * This function actually belongs to the journal, but we keep it here because | 
|  | * we want to keep it static. | 
|  | */ | 
|  | static int bud_wbuf_callback(struct ubifs_info *c, int lnum, int free, int pad) | 
|  | { | 
|  | return ubifs_update_one_lp(c, lnum, free, pad, 0, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * init_constants_sb - initialize UBIFS constants. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * This is a helper function which initializes various UBIFS constants after | 
|  | * the superblock has been read. It also checks various UBIFS parameters and | 
|  | * makes sure they are all right. Returns zero in case of success and a | 
|  | * negative error code in case of failure. | 
|  | */ | 
|  | static int init_constants_sb(struct ubifs_info *c) | 
|  | { | 
|  | int tmp, err; | 
|  | long long tmp64; | 
|  |  | 
|  | c->main_bytes = (long long)c->main_lebs * c->leb_size; | 
|  | c->max_znode_sz = sizeof(struct ubifs_znode) + | 
|  | c->fanout * sizeof(struct ubifs_zbranch); | 
|  |  | 
|  | tmp = ubifs_idx_node_sz(c, 1); | 
|  | c->ranges[UBIFS_IDX_NODE].min_len = tmp; | 
|  | c->min_idx_node_sz = ALIGN(tmp, 8); | 
|  |  | 
|  | tmp = ubifs_idx_node_sz(c, c->fanout); | 
|  | c->ranges[UBIFS_IDX_NODE].max_len = tmp; | 
|  | c->max_idx_node_sz = ALIGN(tmp, 8); | 
|  |  | 
|  | /* Make sure LEB size is large enough to fit full commit */ | 
|  | tmp = UBIFS_CS_NODE_SZ + UBIFS_REF_NODE_SZ * c->jhead_cnt; | 
|  | tmp = ALIGN(tmp, c->min_io_size); | 
|  | if (tmp > c->leb_size) { | 
|  | dbg_err("too small LEB size %d, at least %d needed", | 
|  | c->leb_size, tmp); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Make sure that the log is large enough to fit reference nodes for | 
|  | * all buds plus one reserved LEB. | 
|  | */ | 
|  | tmp64 = c->max_bud_bytes + c->leb_size - 1; | 
|  | c->max_bud_cnt = div_u64(tmp64, c->leb_size); | 
|  | tmp = (c->ref_node_alsz * c->max_bud_cnt + c->leb_size - 1); | 
|  | tmp /= c->leb_size; | 
|  | tmp += 1; | 
|  | if (c->log_lebs < tmp) { | 
|  | dbg_err("too small log %d LEBs, required min. %d LEBs", | 
|  | c->log_lebs, tmp); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * When budgeting we assume worst-case scenarios when the pages are not | 
|  | * be compressed and direntries are of the maximum size. | 
|  | * | 
|  | * Note, data, which may be stored in inodes is budgeted separately, so | 
|  | * it is not included into 'c->inode_budget'. | 
|  | */ | 
|  | c->page_budget = UBIFS_MAX_DATA_NODE_SZ * UBIFS_BLOCKS_PER_PAGE; | 
|  | c->inode_budget = UBIFS_INO_NODE_SZ; | 
|  | c->dent_budget = UBIFS_MAX_DENT_NODE_SZ; | 
|  |  | 
|  | /* | 
|  | * When the amount of flash space used by buds becomes | 
|  | * 'c->max_bud_bytes', UBIFS just blocks all writers and starts commit. | 
|  | * The writers are unblocked when the commit is finished. To avoid | 
|  | * writers to be blocked UBIFS initiates background commit in advance, | 
|  | * when number of bud bytes becomes above the limit defined below. | 
|  | */ | 
|  | c->bg_bud_bytes = (c->max_bud_bytes * 13) >> 4; | 
|  |  | 
|  | /* | 
|  | * Ensure minimum journal size. All the bytes in the journal heads are | 
|  | * considered to be used, when calculating the current journal usage. | 
|  | * Consequently, if the journal is too small, UBIFS will treat it as | 
|  | * always full. | 
|  | */ | 
|  | tmp64 = (long long)(c->jhead_cnt + 1) * c->leb_size + 1; | 
|  | if (c->bg_bud_bytes < tmp64) | 
|  | c->bg_bud_bytes = tmp64; | 
|  | if (c->max_bud_bytes < tmp64 + c->leb_size) | 
|  | c->max_bud_bytes = tmp64 + c->leb_size; | 
|  |  | 
|  | err = ubifs_calc_lpt_geom(c); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | /* Initialize effective LEB size used in budgeting calculations */ | 
|  | c->idx_leb_size = c->leb_size - c->max_idx_node_sz; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * init_constants_master - initialize UBIFS constants. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * This is a helper function which initializes various UBIFS constants after | 
|  | * the master node has been read. It also checks various UBIFS parameters and | 
|  | * makes sure they are all right. | 
|  | */ | 
|  | static void init_constants_master(struct ubifs_info *c) | 
|  | { | 
|  | long long tmp64; | 
|  |  | 
|  | c->min_idx_lebs = ubifs_calc_min_idx_lebs(c); | 
|  | c->report_rp_size = ubifs_reported_space(c, c->rp_size); | 
|  |  | 
|  | /* | 
|  | * Calculate total amount of FS blocks. This number is not used | 
|  | * internally because it does not make much sense for UBIFS, but it is | 
|  | * necessary to report something for the 'statfs()' call. | 
|  | * | 
|  | * Subtract the LEB reserved for GC, the LEB which is reserved for | 
|  | * deletions, minimum LEBs for the index, and assume only one journal | 
|  | * head is available. | 
|  | */ | 
|  | tmp64 = c->main_lebs - 1 - 1 - MIN_INDEX_LEBS - c->jhead_cnt + 1; | 
|  | tmp64 *= (long long)c->leb_size - c->leb_overhead; | 
|  | tmp64 = ubifs_reported_space(c, tmp64); | 
|  | c->block_cnt = tmp64 >> UBIFS_BLOCK_SHIFT; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * take_gc_lnum - reserve GC LEB. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * This function ensures that the LEB reserved for garbage collection is marked | 
|  | * as "taken" in lprops. We also have to set free space to LEB size and dirty | 
|  | * space to zero, because lprops may contain out-of-date information if the | 
|  | * file-system was un-mounted before it has been committed. This function | 
|  | * returns zero in case of success and a negative error code in case of | 
|  | * failure. | 
|  | */ | 
|  | static int take_gc_lnum(struct ubifs_info *c) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if (c->gc_lnum == -1) { | 
|  | ubifs_err("no LEB for GC"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* And we have to tell lprops that this LEB is taken */ | 
|  | err = ubifs_change_one_lp(c, c->gc_lnum, c->leb_size, 0, | 
|  | LPROPS_TAKEN, 0, 0); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * alloc_wbufs - allocate write-buffers. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * This helper function allocates and initializes UBIFS write-buffers. Returns | 
|  | * zero in case of success and %-ENOMEM in case of failure. | 
|  | */ | 
|  | static int alloc_wbufs(struct ubifs_info *c) | 
|  | { | 
|  | int i, err; | 
|  |  | 
|  | c->jheads = kzalloc(c->jhead_cnt * sizeof(struct ubifs_jhead), | 
|  | GFP_KERNEL); | 
|  | if (!c->jheads) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* Initialize journal heads */ | 
|  | for (i = 0; i < c->jhead_cnt; i++) { | 
|  | INIT_LIST_HEAD(&c->jheads[i].buds_list); | 
|  | err = ubifs_wbuf_init(c, &c->jheads[i].wbuf); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | c->jheads[i].wbuf.sync_callback = &bud_wbuf_callback; | 
|  | c->jheads[i].wbuf.jhead = i; | 
|  | } | 
|  |  | 
|  | c->jheads[BASEHD].wbuf.dtype = UBI_SHORTTERM; | 
|  | /* | 
|  | * Garbage Collector head likely contains long-term data and | 
|  | * does not need to be synchronized by timer. | 
|  | */ | 
|  | c->jheads[GCHD].wbuf.dtype = UBI_LONGTERM; | 
|  | c->jheads[GCHD].wbuf.no_timer = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * free_wbufs - free write-buffers. | 
|  | * @c: UBIFS file-system description object | 
|  | */ | 
|  | static void free_wbufs(struct ubifs_info *c) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (c->jheads) { | 
|  | for (i = 0; i < c->jhead_cnt; i++) { | 
|  | kfree(c->jheads[i].wbuf.buf); | 
|  | kfree(c->jheads[i].wbuf.inodes); | 
|  | } | 
|  | kfree(c->jheads); | 
|  | c->jheads = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * free_orphans - free orphans. | 
|  | * @c: UBIFS file-system description object | 
|  | */ | 
|  | static void free_orphans(struct ubifs_info *c) | 
|  | { | 
|  | struct ubifs_orphan *orph; | 
|  |  | 
|  | while (c->orph_dnext) { | 
|  | orph = c->orph_dnext; | 
|  | c->orph_dnext = orph->dnext; | 
|  | list_del(&orph->list); | 
|  | kfree(orph); | 
|  | } | 
|  |  | 
|  | while (!list_empty(&c->orph_list)) { | 
|  | orph = list_entry(c->orph_list.next, struct ubifs_orphan, list); | 
|  | list_del(&orph->list); | 
|  | kfree(orph); | 
|  | dbg_err("orphan list not empty at unmount"); | 
|  | } | 
|  |  | 
|  | vfree(c->orph_buf); | 
|  | c->orph_buf = NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * free_buds - free per-bud objects. | 
|  | * @c: UBIFS file-system description object | 
|  | */ | 
|  | static void free_buds(struct ubifs_info *c) | 
|  | { | 
|  | struct rb_node *this = c->buds.rb_node; | 
|  | struct ubifs_bud *bud; | 
|  |  | 
|  | while (this) { | 
|  | if (this->rb_left) | 
|  | this = this->rb_left; | 
|  | else if (this->rb_right) | 
|  | this = this->rb_right; | 
|  | else { | 
|  | bud = rb_entry(this, struct ubifs_bud, rb); | 
|  | this = rb_parent(this); | 
|  | if (this) { | 
|  | if (this->rb_left == &bud->rb) | 
|  | this->rb_left = NULL; | 
|  | else | 
|  | this->rb_right = NULL; | 
|  | } | 
|  | kfree(bud); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * check_volume_empty - check if the UBI volume is empty. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * This function checks if the UBIFS volume is empty by looking if its LEBs are | 
|  | * mapped or not. The result of checking is stored in the @c->empty variable. | 
|  | * Returns zero in case of success and a negative error code in case of | 
|  | * failure. | 
|  | */ | 
|  | static int check_volume_empty(struct ubifs_info *c) | 
|  | { | 
|  | int lnum, err; | 
|  |  | 
|  | c->empty = 1; | 
|  | for (lnum = 0; lnum < c->leb_cnt; lnum++) { | 
|  | err = ubi_is_mapped(c->ubi, lnum); | 
|  | if (unlikely(err < 0)) | 
|  | return err; | 
|  | if (err == 1) { | 
|  | c->empty = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | cond_resched(); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * UBIFS mount options. | 
|  | * | 
|  | * Opt_fast_unmount: do not run a journal commit before un-mounting | 
|  | * Opt_norm_unmount: run a journal commit before un-mounting | 
|  | * Opt_bulk_read: enable bulk-reads | 
|  | * Opt_no_bulk_read: disable bulk-reads | 
|  | * Opt_chk_data_crc: check CRCs when reading data nodes | 
|  | * Opt_no_chk_data_crc: do not check CRCs when reading data nodes | 
|  | * Opt_override_compr: override default compressor | 
|  | * Opt_err: just end of array marker | 
|  | */ | 
|  | enum { | 
|  | Opt_fast_unmount, | 
|  | Opt_norm_unmount, | 
|  | Opt_bulk_read, | 
|  | Opt_no_bulk_read, | 
|  | Opt_chk_data_crc, | 
|  | Opt_no_chk_data_crc, | 
|  | Opt_override_compr, | 
|  | Opt_err, | 
|  | }; | 
|  |  | 
|  | static const match_table_t tokens = { | 
|  | {Opt_fast_unmount, "fast_unmount"}, | 
|  | {Opt_norm_unmount, "norm_unmount"}, | 
|  | {Opt_bulk_read, "bulk_read"}, | 
|  | {Opt_no_bulk_read, "no_bulk_read"}, | 
|  | {Opt_chk_data_crc, "chk_data_crc"}, | 
|  | {Opt_no_chk_data_crc, "no_chk_data_crc"}, | 
|  | {Opt_override_compr, "compr=%s"}, | 
|  | {Opt_err, NULL}, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * parse_standard_option - parse a standard mount option. | 
|  | * @option: the option to parse | 
|  | * | 
|  | * Normally, standard mount options like "sync" are passed to file-systems as | 
|  | * flags. However, when a "rootflags=" kernel boot parameter is used, they may | 
|  | * be present in the options string. This function tries to deal with this | 
|  | * situation and parse standard options. Returns 0 if the option was not | 
|  | * recognized, and the corresponding integer flag if it was. | 
|  | * | 
|  | * UBIFS is only interested in the "sync" option, so do not check for anything | 
|  | * else. | 
|  | */ | 
|  | static int parse_standard_option(const char *option) | 
|  | { | 
|  | ubifs_msg("parse %s", option); | 
|  | if (!strcmp(option, "sync")) | 
|  | return MS_SYNCHRONOUS; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ubifs_parse_options - parse mount parameters. | 
|  | * @c: UBIFS file-system description object | 
|  | * @options: parameters to parse | 
|  | * @is_remount: non-zero if this is FS re-mount | 
|  | * | 
|  | * This function parses UBIFS mount options and returns zero in case success | 
|  | * and a negative error code in case of failure. | 
|  | */ | 
|  | static int ubifs_parse_options(struct ubifs_info *c, char *options, | 
|  | int is_remount) | 
|  | { | 
|  | char *p; | 
|  | substring_t args[MAX_OPT_ARGS]; | 
|  |  | 
|  | if (!options) | 
|  | return 0; | 
|  |  | 
|  | while ((p = strsep(&options, ","))) { | 
|  | int token; | 
|  |  | 
|  | if (!*p) | 
|  | continue; | 
|  |  | 
|  | token = match_token(p, tokens, args); | 
|  | switch (token) { | 
|  | /* | 
|  | * %Opt_fast_unmount and %Opt_norm_unmount options are ignored. | 
|  | * We accept them in order to be backward-compatible. But this | 
|  | * should be removed at some point. | 
|  | */ | 
|  | case Opt_fast_unmount: | 
|  | c->mount_opts.unmount_mode = 2; | 
|  | break; | 
|  | case Opt_norm_unmount: | 
|  | c->mount_opts.unmount_mode = 1; | 
|  | break; | 
|  | case Opt_bulk_read: | 
|  | c->mount_opts.bulk_read = 2; | 
|  | c->bulk_read = 1; | 
|  | break; | 
|  | case Opt_no_bulk_read: | 
|  | c->mount_opts.bulk_read = 1; | 
|  | c->bulk_read = 0; | 
|  | break; | 
|  | case Opt_chk_data_crc: | 
|  | c->mount_opts.chk_data_crc = 2; | 
|  | c->no_chk_data_crc = 0; | 
|  | break; | 
|  | case Opt_no_chk_data_crc: | 
|  | c->mount_opts.chk_data_crc = 1; | 
|  | c->no_chk_data_crc = 1; | 
|  | break; | 
|  | case Opt_override_compr: | 
|  | { | 
|  | char *name = match_strdup(&args[0]); | 
|  |  | 
|  | if (!name) | 
|  | return -ENOMEM; | 
|  | if (!strcmp(name, "none")) | 
|  | c->mount_opts.compr_type = UBIFS_COMPR_NONE; | 
|  | else if (!strcmp(name, "lzo")) | 
|  | c->mount_opts.compr_type = UBIFS_COMPR_LZO; | 
|  | else if (!strcmp(name, "zlib")) | 
|  | c->mount_opts.compr_type = UBIFS_COMPR_ZLIB; | 
|  | else { | 
|  | ubifs_err("unknown compressor \"%s\"", name); | 
|  | kfree(name); | 
|  | return -EINVAL; | 
|  | } | 
|  | kfree(name); | 
|  | c->mount_opts.override_compr = 1; | 
|  | c->default_compr = c->mount_opts.compr_type; | 
|  | break; | 
|  | } | 
|  | default: | 
|  | { | 
|  | unsigned long flag; | 
|  | struct super_block *sb = c->vfs_sb; | 
|  |  | 
|  | flag = parse_standard_option(p); | 
|  | if (!flag) { | 
|  | ubifs_err("unrecognized mount option \"%s\" " | 
|  | "or missing value", p); | 
|  | return -EINVAL; | 
|  | } | 
|  | sb->s_flags |= flag; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * destroy_journal - destroy journal data structures. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * This function destroys journal data structures including those that may have | 
|  | * been created by recovery functions. | 
|  | */ | 
|  | static void destroy_journal(struct ubifs_info *c) | 
|  | { | 
|  | while (!list_empty(&c->unclean_leb_list)) { | 
|  | struct ubifs_unclean_leb *ucleb; | 
|  |  | 
|  | ucleb = list_entry(c->unclean_leb_list.next, | 
|  | struct ubifs_unclean_leb, list); | 
|  | list_del(&ucleb->list); | 
|  | kfree(ucleb); | 
|  | } | 
|  | while (!list_empty(&c->old_buds)) { | 
|  | struct ubifs_bud *bud; | 
|  |  | 
|  | bud = list_entry(c->old_buds.next, struct ubifs_bud, list); | 
|  | list_del(&bud->list); | 
|  | kfree(bud); | 
|  | } | 
|  | ubifs_destroy_idx_gc(c); | 
|  | ubifs_destroy_size_tree(c); | 
|  | ubifs_tnc_close(c); | 
|  | free_buds(c); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bu_init - initialize bulk-read information. | 
|  | * @c: UBIFS file-system description object | 
|  | */ | 
|  | static void bu_init(struct ubifs_info *c) | 
|  | { | 
|  | ubifs_assert(c->bulk_read == 1); | 
|  |  | 
|  | if (c->bu.buf) | 
|  | return; /* Already initialized */ | 
|  |  | 
|  | again: | 
|  | c->bu.buf = kmalloc(c->max_bu_buf_len, GFP_KERNEL | __GFP_NOWARN); | 
|  | if (!c->bu.buf) { | 
|  | if (c->max_bu_buf_len > UBIFS_KMALLOC_OK) { | 
|  | c->max_bu_buf_len = UBIFS_KMALLOC_OK; | 
|  | goto again; | 
|  | } | 
|  |  | 
|  | /* Just disable bulk-read */ | 
|  | ubifs_warn("Cannot allocate %d bytes of memory for bulk-read, " | 
|  | "disabling it", c->max_bu_buf_len); | 
|  | c->mount_opts.bulk_read = 1; | 
|  | c->bulk_read = 0; | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * check_free_space - check if there is enough free space to mount. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * This function makes sure UBIFS has enough free space to be mounted in | 
|  | * read/write mode. UBIFS must always have some free space to allow deletions. | 
|  | */ | 
|  | static int check_free_space(struct ubifs_info *c) | 
|  | { | 
|  | ubifs_assert(c->dark_wm > 0); | 
|  | if (c->lst.total_free + c->lst.total_dirty < c->dark_wm) { | 
|  | ubifs_err("insufficient free space to mount in read/write mode"); | 
|  | dbg_dump_budg(c); | 
|  | dbg_dump_lprops(c); | 
|  | return -ENOSPC; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mount_ubifs - mount UBIFS file-system. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * This function mounts UBIFS file system. Returns zero in case of success and | 
|  | * a negative error code in case of failure. | 
|  | * | 
|  | * Note, the function does not de-allocate resources it it fails half way | 
|  | * through, and the caller has to do this instead. | 
|  | */ | 
|  | static int mount_ubifs(struct ubifs_info *c) | 
|  | { | 
|  | struct super_block *sb = c->vfs_sb; | 
|  | int err, mounted_read_only = (sb->s_flags & MS_RDONLY); | 
|  | long long x; | 
|  | size_t sz; | 
|  |  | 
|  | err = init_constants_early(c); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = ubifs_debugging_init(c); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = check_volume_empty(c); | 
|  | if (err) | 
|  | goto out_free; | 
|  |  | 
|  | if (c->empty && (mounted_read_only || c->ro_media)) { | 
|  | /* | 
|  | * This UBI volume is empty, and read-only, or the file system | 
|  | * is mounted read-only - we cannot format it. | 
|  | */ | 
|  | ubifs_err("can't format empty UBI volume: read-only %s", | 
|  | c->ro_media ? "UBI volume" : "mount"); | 
|  | err = -EROFS; | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | if (c->ro_media && !mounted_read_only) { | 
|  | ubifs_err("cannot mount read-write - read-only media"); | 
|  | err = -EROFS; | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The requirement for the buffer is that it should fit indexing B-tree | 
|  | * height amount of integers. We assume the height if the TNC tree will | 
|  | * never exceed 64. | 
|  | */ | 
|  | err = -ENOMEM; | 
|  | c->bottom_up_buf = kmalloc(BOTTOM_UP_HEIGHT * sizeof(int), GFP_KERNEL); | 
|  | if (!c->bottom_up_buf) | 
|  | goto out_free; | 
|  |  | 
|  | c->sbuf = vmalloc(c->leb_size); | 
|  | if (!c->sbuf) | 
|  | goto out_free; | 
|  |  | 
|  | if (!mounted_read_only) { | 
|  | c->ileb_buf = vmalloc(c->leb_size); | 
|  | if (!c->ileb_buf) | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | if (c->bulk_read == 1) | 
|  | bu_init(c); | 
|  |  | 
|  | /* | 
|  | * We have to check all CRCs, even for data nodes, when we mount the FS | 
|  | * (specifically, when we are replaying). | 
|  | */ | 
|  | c->always_chk_crc = 1; | 
|  |  | 
|  | err = ubifs_read_superblock(c); | 
|  | if (err) | 
|  | goto out_free; | 
|  |  | 
|  | /* | 
|  | * Make sure the compressor which is set as default in the superblock | 
|  | * or overridden by mount options is actually compiled in. | 
|  | */ | 
|  | if (!ubifs_compr_present(c->default_compr)) { | 
|  | ubifs_err("'compressor \"%s\" is not compiled in", | 
|  | ubifs_compr_name(c->default_compr)); | 
|  | err = -ENOTSUPP; | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | err = init_constants_sb(c); | 
|  | if (err) | 
|  | goto out_free; | 
|  |  | 
|  | sz = ALIGN(c->max_idx_node_sz, c->min_io_size); | 
|  | sz = ALIGN(sz + c->max_idx_node_sz, c->min_io_size); | 
|  | c->cbuf = kmalloc(sz, GFP_NOFS); | 
|  | if (!c->cbuf) { | 
|  | err = -ENOMEM; | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num, c->vi.vol_id); | 
|  | if (!mounted_read_only) { | 
|  | err = alloc_wbufs(c); | 
|  | if (err) | 
|  | goto out_cbuf; | 
|  |  | 
|  | /* Create background thread */ | 
|  | c->bgt = kthread_create(ubifs_bg_thread, c, "%s", c->bgt_name); | 
|  | if (IS_ERR(c->bgt)) { | 
|  | err = PTR_ERR(c->bgt); | 
|  | c->bgt = NULL; | 
|  | ubifs_err("cannot spawn \"%s\", error %d", | 
|  | c->bgt_name, err); | 
|  | goto out_wbufs; | 
|  | } | 
|  | wake_up_process(c->bgt); | 
|  | } | 
|  |  | 
|  | err = ubifs_read_master(c); | 
|  | if (err) | 
|  | goto out_master; | 
|  |  | 
|  | init_constants_master(c); | 
|  |  | 
|  | if ((c->mst_node->flags & cpu_to_le32(UBIFS_MST_DIRTY)) != 0) { | 
|  | ubifs_msg("recovery needed"); | 
|  | c->need_recovery = 1; | 
|  | if (!mounted_read_only) { | 
|  | err = ubifs_recover_inl_heads(c, c->sbuf); | 
|  | if (err) | 
|  | goto out_master; | 
|  | } | 
|  | } else if (!mounted_read_only) { | 
|  | /* | 
|  | * Set the "dirty" flag so that if we reboot uncleanly we | 
|  | * will notice this immediately on the next mount. | 
|  | */ | 
|  | c->mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY); | 
|  | err = ubifs_write_master(c); | 
|  | if (err) | 
|  | goto out_master; | 
|  | } | 
|  |  | 
|  | err = ubifs_lpt_init(c, 1, !mounted_read_only); | 
|  | if (err) | 
|  | goto out_lpt; | 
|  |  | 
|  | err = dbg_check_idx_size(c, c->old_idx_sz); | 
|  | if (err) | 
|  | goto out_lpt; | 
|  |  | 
|  | err = ubifs_replay_journal(c); | 
|  | if (err) | 
|  | goto out_journal; | 
|  |  | 
|  | /* Calculate 'min_idx_lebs' after journal replay */ | 
|  | c->min_idx_lebs = ubifs_calc_min_idx_lebs(c); | 
|  |  | 
|  | err = ubifs_mount_orphans(c, c->need_recovery, mounted_read_only); | 
|  | if (err) | 
|  | goto out_orphans; | 
|  |  | 
|  | if (!mounted_read_only) { | 
|  | int lnum; | 
|  |  | 
|  | err = check_free_space(c); | 
|  | if (err) | 
|  | goto out_orphans; | 
|  |  | 
|  | /* Check for enough log space */ | 
|  | lnum = c->lhead_lnum + 1; | 
|  | if (lnum >= UBIFS_LOG_LNUM + c->log_lebs) | 
|  | lnum = UBIFS_LOG_LNUM; | 
|  | if (lnum == c->ltail_lnum) { | 
|  | err = ubifs_consolidate_log(c); | 
|  | if (err) | 
|  | goto out_orphans; | 
|  | } | 
|  |  | 
|  | if (c->need_recovery) { | 
|  | err = ubifs_recover_size(c); | 
|  | if (err) | 
|  | goto out_orphans; | 
|  | err = ubifs_rcvry_gc_commit(c); | 
|  | if (err) | 
|  | goto out_orphans; | 
|  | } else { | 
|  | err = take_gc_lnum(c); | 
|  | if (err) | 
|  | goto out_orphans; | 
|  |  | 
|  | /* | 
|  | * GC LEB may contain garbage if there was an unclean | 
|  | * reboot, and it should be un-mapped. | 
|  | */ | 
|  | err = ubifs_leb_unmap(c, c->gc_lnum); | 
|  | if (err) | 
|  | goto out_orphans; | 
|  | } | 
|  |  | 
|  | err = dbg_check_lprops(c); | 
|  | if (err) | 
|  | goto out_orphans; | 
|  | } else if (c->need_recovery) { | 
|  | err = ubifs_recover_size(c); | 
|  | if (err) | 
|  | goto out_orphans; | 
|  | } else { | 
|  | /* | 
|  | * Even if we mount read-only, we have to set space in GC LEB | 
|  | * to proper value because this affects UBIFS free space | 
|  | * reporting. We do not want to have a situation when | 
|  | * re-mounting from R/O to R/W changes amount of free space. | 
|  | */ | 
|  | err = take_gc_lnum(c); | 
|  | if (err) | 
|  | goto out_orphans; | 
|  | } | 
|  |  | 
|  | spin_lock(&ubifs_infos_lock); | 
|  | list_add_tail(&c->infos_list, &ubifs_infos); | 
|  | spin_unlock(&ubifs_infos_lock); | 
|  |  | 
|  | if (c->need_recovery) { | 
|  | if (mounted_read_only) | 
|  | ubifs_msg("recovery deferred"); | 
|  | else { | 
|  | c->need_recovery = 0; | 
|  | ubifs_msg("recovery completed"); | 
|  | /* | 
|  | * GC LEB has to be empty and taken at this point. But | 
|  | * the journal head LEBs may also be accounted as | 
|  | * "empty taken" if they are empty. | 
|  | */ | 
|  | ubifs_assert(c->lst.taken_empty_lebs > 0); | 
|  | } | 
|  | } else | 
|  | ubifs_assert(c->lst.taken_empty_lebs > 0); | 
|  |  | 
|  | err = dbg_check_filesystem(c); | 
|  | if (err) | 
|  | goto out_infos; | 
|  |  | 
|  | err = dbg_debugfs_init_fs(c); | 
|  | if (err) | 
|  | goto out_infos; | 
|  |  | 
|  | c->always_chk_crc = 0; | 
|  |  | 
|  | ubifs_msg("mounted UBI device %d, volume %d, name \"%s\"", | 
|  | c->vi.ubi_num, c->vi.vol_id, c->vi.name); | 
|  | if (mounted_read_only) | 
|  | ubifs_msg("mounted read-only"); | 
|  | x = (long long)c->main_lebs * c->leb_size; | 
|  | ubifs_msg("file system size:   %lld bytes (%lld KiB, %lld MiB, %d " | 
|  | "LEBs)", x, x >> 10, x >> 20, c->main_lebs); | 
|  | x = (long long)c->log_lebs * c->leb_size + c->max_bud_bytes; | 
|  | ubifs_msg("journal size:       %lld bytes (%lld KiB, %lld MiB, %d " | 
|  | "LEBs)", x, x >> 10, x >> 20, c->log_lebs + c->max_bud_cnt); | 
|  | ubifs_msg("media format:       w%d/r%d (latest is w%d/r%d)", | 
|  | c->fmt_version, c->ro_compat_version, | 
|  | UBIFS_FORMAT_VERSION, UBIFS_RO_COMPAT_VERSION); | 
|  | ubifs_msg("default compressor: %s", ubifs_compr_name(c->default_compr)); | 
|  | ubifs_msg("reserved for root:  %llu bytes (%llu KiB)", | 
|  | c->report_rp_size, c->report_rp_size >> 10); | 
|  |  | 
|  | dbg_msg("compiled on:         " __DATE__ " at " __TIME__); | 
|  | dbg_msg("min. I/O unit size:  %d bytes", c->min_io_size); | 
|  | dbg_msg("LEB size:            %d bytes (%d KiB)", | 
|  | c->leb_size, c->leb_size >> 10); | 
|  | dbg_msg("data journal heads:  %d", | 
|  | c->jhead_cnt - NONDATA_JHEADS_CNT); | 
|  | dbg_msg("UUID:                %pUB", c->uuid); | 
|  | dbg_msg("big_lpt              %d", c->big_lpt); | 
|  | dbg_msg("log LEBs:            %d (%d - %d)", | 
|  | c->log_lebs, UBIFS_LOG_LNUM, c->log_last); | 
|  | dbg_msg("LPT area LEBs:       %d (%d - %d)", | 
|  | c->lpt_lebs, c->lpt_first, c->lpt_last); | 
|  | dbg_msg("orphan area LEBs:    %d (%d - %d)", | 
|  | c->orph_lebs, c->orph_first, c->orph_last); | 
|  | dbg_msg("main area LEBs:      %d (%d - %d)", | 
|  | c->main_lebs, c->main_first, c->leb_cnt - 1); | 
|  | dbg_msg("index LEBs:          %d", c->lst.idx_lebs); | 
|  | dbg_msg("total index bytes:   %lld (%lld KiB, %lld MiB)", | 
|  | c->old_idx_sz, c->old_idx_sz >> 10, c->old_idx_sz >> 20); | 
|  | dbg_msg("key hash type:       %d", c->key_hash_type); | 
|  | dbg_msg("tree fanout:         %d", c->fanout); | 
|  | dbg_msg("reserved GC LEB:     %d", c->gc_lnum); | 
|  | dbg_msg("first main LEB:      %d", c->main_first); | 
|  | dbg_msg("max. znode size      %d", c->max_znode_sz); | 
|  | dbg_msg("max. index node size %d", c->max_idx_node_sz); | 
|  | dbg_msg("node sizes:          data %zu, inode %zu, dentry %zu", | 
|  | UBIFS_DATA_NODE_SZ, UBIFS_INO_NODE_SZ, UBIFS_DENT_NODE_SZ); | 
|  | dbg_msg("node sizes:          trun %zu, sb %zu, master %zu", | 
|  | UBIFS_TRUN_NODE_SZ, UBIFS_SB_NODE_SZ, UBIFS_MST_NODE_SZ); | 
|  | dbg_msg("node sizes:          ref %zu, cmt. start %zu, orph %zu", | 
|  | UBIFS_REF_NODE_SZ, UBIFS_CS_NODE_SZ, UBIFS_ORPH_NODE_SZ); | 
|  | dbg_msg("max. node sizes:     data %zu, inode %zu dentry %zu", | 
|  | UBIFS_MAX_DATA_NODE_SZ, UBIFS_MAX_INO_NODE_SZ, | 
|  | UBIFS_MAX_DENT_NODE_SZ); | 
|  | dbg_msg("dead watermark:      %d", c->dead_wm); | 
|  | dbg_msg("dark watermark:      %d", c->dark_wm); | 
|  | dbg_msg("LEB overhead:        %d", c->leb_overhead); | 
|  | x = (long long)c->main_lebs * c->dark_wm; | 
|  | dbg_msg("max. dark space:     %lld (%lld KiB, %lld MiB)", | 
|  | x, x >> 10, x >> 20); | 
|  | dbg_msg("maximum bud bytes:   %lld (%lld KiB, %lld MiB)", | 
|  | c->max_bud_bytes, c->max_bud_bytes >> 10, | 
|  | c->max_bud_bytes >> 20); | 
|  | dbg_msg("BG commit bud bytes: %lld (%lld KiB, %lld MiB)", | 
|  | c->bg_bud_bytes, c->bg_bud_bytes >> 10, | 
|  | c->bg_bud_bytes >> 20); | 
|  | dbg_msg("current bud bytes    %lld (%lld KiB, %lld MiB)", | 
|  | c->bud_bytes, c->bud_bytes >> 10, c->bud_bytes >> 20); | 
|  | dbg_msg("max. seq. number:    %llu", c->max_sqnum); | 
|  | dbg_msg("commit number:       %llu", c->cmt_no); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_infos: | 
|  | spin_lock(&ubifs_infos_lock); | 
|  | list_del(&c->infos_list); | 
|  | spin_unlock(&ubifs_infos_lock); | 
|  | out_orphans: | 
|  | free_orphans(c); | 
|  | out_journal: | 
|  | destroy_journal(c); | 
|  | out_lpt: | 
|  | ubifs_lpt_free(c, 0); | 
|  | out_master: | 
|  | kfree(c->mst_node); | 
|  | kfree(c->rcvrd_mst_node); | 
|  | if (c->bgt) | 
|  | kthread_stop(c->bgt); | 
|  | out_wbufs: | 
|  | free_wbufs(c); | 
|  | out_cbuf: | 
|  | kfree(c->cbuf); | 
|  | out_free: | 
|  | kfree(c->bu.buf); | 
|  | vfree(c->ileb_buf); | 
|  | vfree(c->sbuf); | 
|  | kfree(c->bottom_up_buf); | 
|  | ubifs_debugging_exit(c); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ubifs_umount - un-mount UBIFS file-system. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * Note, this function is called to free allocated resourced when un-mounting, | 
|  | * as well as free resources when an error occurred while we were half way | 
|  | * through mounting (error path cleanup function). So it has to make sure the | 
|  | * resource was actually allocated before freeing it. | 
|  | */ | 
|  | static void ubifs_umount(struct ubifs_info *c) | 
|  | { | 
|  | dbg_gen("un-mounting UBI device %d, volume %d", c->vi.ubi_num, | 
|  | c->vi.vol_id); | 
|  |  | 
|  | dbg_debugfs_exit_fs(c); | 
|  | spin_lock(&ubifs_infos_lock); | 
|  | list_del(&c->infos_list); | 
|  | spin_unlock(&ubifs_infos_lock); | 
|  |  | 
|  | if (c->bgt) | 
|  | kthread_stop(c->bgt); | 
|  |  | 
|  | destroy_journal(c); | 
|  | free_wbufs(c); | 
|  | free_orphans(c); | 
|  | ubifs_lpt_free(c, 0); | 
|  |  | 
|  | kfree(c->cbuf); | 
|  | kfree(c->rcvrd_mst_node); | 
|  | kfree(c->mst_node); | 
|  | kfree(c->bu.buf); | 
|  | vfree(c->ileb_buf); | 
|  | vfree(c->sbuf); | 
|  | kfree(c->bottom_up_buf); | 
|  | ubifs_debugging_exit(c); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ubifs_remount_rw - re-mount in read-write mode. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * UBIFS avoids allocating many unnecessary resources when mounted in read-only | 
|  | * mode. This function allocates the needed resources and re-mounts UBIFS in | 
|  | * read-write mode. | 
|  | */ | 
|  | static int ubifs_remount_rw(struct ubifs_info *c) | 
|  | { | 
|  | int err, lnum; | 
|  |  | 
|  | if (c->rw_incompat) { | 
|  | ubifs_err("the file-system is not R/W-compatible"); | 
|  | ubifs_msg("on-flash format version is w%d/r%d, but software " | 
|  | "only supports up to version w%d/r%d", c->fmt_version, | 
|  | c->ro_compat_version, UBIFS_FORMAT_VERSION, | 
|  | UBIFS_RO_COMPAT_VERSION); | 
|  | return -EROFS; | 
|  | } | 
|  |  | 
|  | mutex_lock(&c->umount_mutex); | 
|  | dbg_save_space_info(c); | 
|  | c->remounting_rw = 1; | 
|  | c->always_chk_crc = 1; | 
|  |  | 
|  | err = check_free_space(c); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | if (c->old_leb_cnt != c->leb_cnt) { | 
|  | struct ubifs_sb_node *sup; | 
|  |  | 
|  | sup = ubifs_read_sb_node(c); | 
|  | if (IS_ERR(sup)) { | 
|  | err = PTR_ERR(sup); | 
|  | goto out; | 
|  | } | 
|  | sup->leb_cnt = cpu_to_le32(c->leb_cnt); | 
|  | err = ubifs_write_sb_node(c, sup); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (c->need_recovery) { | 
|  | ubifs_msg("completing deferred recovery"); | 
|  | err = ubifs_write_rcvrd_mst_node(c); | 
|  | if (err) | 
|  | goto out; | 
|  | err = ubifs_recover_size(c); | 
|  | if (err) | 
|  | goto out; | 
|  | err = ubifs_clean_lebs(c, c->sbuf); | 
|  | if (err) | 
|  | goto out; | 
|  | err = ubifs_recover_inl_heads(c, c->sbuf); | 
|  | if (err) | 
|  | goto out; | 
|  | } else { | 
|  | /* A readonly mount is not allowed to have orphans */ | 
|  | ubifs_assert(c->tot_orphans == 0); | 
|  | err = ubifs_clear_orphans(c); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!(c->mst_node->flags & cpu_to_le32(UBIFS_MST_DIRTY))) { | 
|  | c->mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY); | 
|  | err = ubifs_write_master(c); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | c->ileb_buf = vmalloc(c->leb_size); | 
|  | if (!c->ileb_buf) { | 
|  | err = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | err = ubifs_lpt_init(c, 0, 1); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | err = alloc_wbufs(c); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | ubifs_create_buds_lists(c); | 
|  |  | 
|  | /* Create background thread */ | 
|  | c->bgt = kthread_create(ubifs_bg_thread, c, "%s", c->bgt_name); | 
|  | if (IS_ERR(c->bgt)) { | 
|  | err = PTR_ERR(c->bgt); | 
|  | c->bgt = NULL; | 
|  | ubifs_err("cannot spawn \"%s\", error %d", | 
|  | c->bgt_name, err); | 
|  | goto out; | 
|  | } | 
|  | wake_up_process(c->bgt); | 
|  |  | 
|  | c->orph_buf = vmalloc(c->leb_size); | 
|  | if (!c->orph_buf) { | 
|  | err = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Check for enough log space */ | 
|  | lnum = c->lhead_lnum + 1; | 
|  | if (lnum >= UBIFS_LOG_LNUM + c->log_lebs) | 
|  | lnum = UBIFS_LOG_LNUM; | 
|  | if (lnum == c->ltail_lnum) { | 
|  | err = ubifs_consolidate_log(c); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (c->need_recovery) | 
|  | err = ubifs_rcvry_gc_commit(c); | 
|  | else | 
|  | err = ubifs_leb_unmap(c, c->gc_lnum); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | if (c->need_recovery) { | 
|  | c->need_recovery = 0; | 
|  | ubifs_msg("deferred recovery completed"); | 
|  | } | 
|  |  | 
|  | dbg_gen("re-mounted read-write"); | 
|  | c->vfs_sb->s_flags &= ~MS_RDONLY; | 
|  | c->remounting_rw = 0; | 
|  | c->always_chk_crc = 0; | 
|  | err = dbg_check_space_info(c); | 
|  | mutex_unlock(&c->umount_mutex); | 
|  | return err; | 
|  |  | 
|  | out: | 
|  | vfree(c->orph_buf); | 
|  | c->orph_buf = NULL; | 
|  | if (c->bgt) { | 
|  | kthread_stop(c->bgt); | 
|  | c->bgt = NULL; | 
|  | } | 
|  | free_wbufs(c); | 
|  | vfree(c->ileb_buf); | 
|  | c->ileb_buf = NULL; | 
|  | ubifs_lpt_free(c, 1); | 
|  | c->remounting_rw = 0; | 
|  | c->always_chk_crc = 0; | 
|  | mutex_unlock(&c->umount_mutex); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ubifs_remount_ro - re-mount in read-only mode. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * We assume VFS has stopped writing. Possibly the background thread could be | 
|  | * running a commit, however kthread_stop will wait in that case. | 
|  | */ | 
|  | static void ubifs_remount_ro(struct ubifs_info *c) | 
|  | { | 
|  | int i, err; | 
|  |  | 
|  | ubifs_assert(!c->need_recovery); | 
|  | ubifs_assert(!(c->vfs_sb->s_flags & MS_RDONLY)); | 
|  |  | 
|  | mutex_lock(&c->umount_mutex); | 
|  | if (c->bgt) { | 
|  | kthread_stop(c->bgt); | 
|  | c->bgt = NULL; | 
|  | } | 
|  |  | 
|  | dbg_save_space_info(c); | 
|  |  | 
|  | for (i = 0; i < c->jhead_cnt; i++) { | 
|  | ubifs_wbuf_sync(&c->jheads[i].wbuf); | 
|  | hrtimer_cancel(&c->jheads[i].wbuf.timer); | 
|  | } | 
|  |  | 
|  | c->mst_node->flags &= ~cpu_to_le32(UBIFS_MST_DIRTY); | 
|  | c->mst_node->flags |= cpu_to_le32(UBIFS_MST_NO_ORPHS); | 
|  | c->mst_node->gc_lnum = cpu_to_le32(c->gc_lnum); | 
|  | err = ubifs_write_master(c); | 
|  | if (err) | 
|  | ubifs_ro_mode(c, err); | 
|  |  | 
|  | free_wbufs(c); | 
|  | vfree(c->orph_buf); | 
|  | c->orph_buf = NULL; | 
|  | vfree(c->ileb_buf); | 
|  | c->ileb_buf = NULL; | 
|  | ubifs_lpt_free(c, 1); | 
|  | err = dbg_check_space_info(c); | 
|  | if (err) | 
|  | ubifs_ro_mode(c, err); | 
|  | mutex_unlock(&c->umount_mutex); | 
|  | } | 
|  |  | 
|  | static void ubifs_put_super(struct super_block *sb) | 
|  | { | 
|  | int i; | 
|  | struct ubifs_info *c = sb->s_fs_info; | 
|  |  | 
|  | ubifs_msg("un-mount UBI device %d, volume %d", c->vi.ubi_num, | 
|  | c->vi.vol_id); | 
|  |  | 
|  | /* | 
|  | * The following asserts are only valid if there has not been a failure | 
|  | * of the media. For example, there will be dirty inodes if we failed | 
|  | * to write them back because of I/O errors. | 
|  | */ | 
|  | ubifs_assert(atomic_long_read(&c->dirty_pg_cnt) == 0); | 
|  | ubifs_assert(c->budg_idx_growth == 0); | 
|  | ubifs_assert(c->budg_dd_growth == 0); | 
|  | ubifs_assert(c->budg_data_growth == 0); | 
|  |  | 
|  | /* | 
|  | * The 'c->umount_lock' prevents races between UBIFS memory shrinker | 
|  | * and file system un-mount. Namely, it prevents the shrinker from | 
|  | * picking this superblock for shrinking - it will be just skipped if | 
|  | * the mutex is locked. | 
|  | */ | 
|  | mutex_lock(&c->umount_mutex); | 
|  | if (!(c->vfs_sb->s_flags & MS_RDONLY)) { | 
|  | /* | 
|  | * First of all kill the background thread to make sure it does | 
|  | * not interfere with un-mounting and freeing resources. | 
|  | */ | 
|  | if (c->bgt) { | 
|  | kthread_stop(c->bgt); | 
|  | c->bgt = NULL; | 
|  | } | 
|  |  | 
|  | /* Synchronize write-buffers */ | 
|  | if (c->jheads) | 
|  | for (i = 0; i < c->jhead_cnt; i++) | 
|  | ubifs_wbuf_sync(&c->jheads[i].wbuf); | 
|  |  | 
|  | /* | 
|  | * On fatal errors c->ro_media is set to 1, in which case we do | 
|  | * not write the master node. | 
|  | */ | 
|  | if (!c->ro_media) { | 
|  | /* | 
|  | * We are being cleanly unmounted which means the | 
|  | * orphans were killed - indicate this in the master | 
|  | * node. Also save the reserved GC LEB number. | 
|  | */ | 
|  | int err; | 
|  |  | 
|  | c->mst_node->flags &= ~cpu_to_le32(UBIFS_MST_DIRTY); | 
|  | c->mst_node->flags |= cpu_to_le32(UBIFS_MST_NO_ORPHS); | 
|  | c->mst_node->gc_lnum = cpu_to_le32(c->gc_lnum); | 
|  | err = ubifs_write_master(c); | 
|  | if (err) | 
|  | /* | 
|  | * Recovery will attempt to fix the master area | 
|  | * next mount, so we just print a message and | 
|  | * continue to unmount normally. | 
|  | */ | 
|  | ubifs_err("failed to write master node, " | 
|  | "error %d", err); | 
|  | } | 
|  | } | 
|  |  | 
|  | ubifs_umount(c); | 
|  | bdi_destroy(&c->bdi); | 
|  | ubi_close_volume(c->ubi); | 
|  | mutex_unlock(&c->umount_mutex); | 
|  | kfree(c); | 
|  | } | 
|  |  | 
|  | static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data) | 
|  | { | 
|  | int err; | 
|  | struct ubifs_info *c = sb->s_fs_info; | 
|  |  | 
|  | dbg_gen("old flags %#lx, new flags %#x", sb->s_flags, *flags); | 
|  |  | 
|  | err = ubifs_parse_options(c, data, 1); | 
|  | if (err) { | 
|  | ubifs_err("invalid or unknown remount parameter"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if ((sb->s_flags & MS_RDONLY) && !(*flags & MS_RDONLY)) { | 
|  | if (c->ro_media) { | 
|  | ubifs_msg("cannot re-mount due to prior errors"); | 
|  | return -EROFS; | 
|  | } | 
|  | err = ubifs_remount_rw(c); | 
|  | if (err) | 
|  | return err; | 
|  | } else if (!(sb->s_flags & MS_RDONLY) && (*flags & MS_RDONLY)) { | 
|  | if (c->ro_media) { | 
|  | ubifs_msg("cannot re-mount due to prior errors"); | 
|  | return -EROFS; | 
|  | } | 
|  | ubifs_remount_ro(c); | 
|  | } | 
|  |  | 
|  | if (c->bulk_read == 1) | 
|  | bu_init(c); | 
|  | else { | 
|  | dbg_gen("disable bulk-read"); | 
|  | kfree(c->bu.buf); | 
|  | c->bu.buf = NULL; | 
|  | } | 
|  |  | 
|  | ubifs_assert(c->lst.taken_empty_lebs > 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | const struct super_operations ubifs_super_operations = { | 
|  | .alloc_inode   = ubifs_alloc_inode, | 
|  | .destroy_inode = ubifs_destroy_inode, | 
|  | .put_super     = ubifs_put_super, | 
|  | .write_inode   = ubifs_write_inode, | 
|  | .evict_inode   = ubifs_evict_inode, | 
|  | .statfs        = ubifs_statfs, | 
|  | .dirty_inode   = ubifs_dirty_inode, | 
|  | .remount_fs    = ubifs_remount_fs, | 
|  | .show_options  = ubifs_show_options, | 
|  | .sync_fs       = ubifs_sync_fs, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * open_ubi - parse UBI device name string and open the UBI device. | 
|  | * @name: UBI volume name | 
|  | * @mode: UBI volume open mode | 
|  | * | 
|  | * The primary method of mounting UBIFS is by specifying the UBI volume | 
|  | * character device node path. However, UBIFS may also be mounted withoug any | 
|  | * character device node using one of the following methods: | 
|  | * | 
|  | * o ubiX_Y    - mount UBI device number X, volume Y; | 
|  | * o ubiY      - mount UBI device number 0, volume Y; | 
|  | * o ubiX:NAME - mount UBI device X, volume with name NAME; | 
|  | * o ubi:NAME  - mount UBI device 0, volume with name NAME. | 
|  | * | 
|  | * Alternative '!' separator may be used instead of ':' (because some shells | 
|  | * like busybox may interpret ':' as an NFS host name separator). This function | 
|  | * returns UBI volume description object in case of success and a negative | 
|  | * error code in case of failure. | 
|  | */ | 
|  | static struct ubi_volume_desc *open_ubi(const char *name, int mode) | 
|  | { | 
|  | struct ubi_volume_desc *ubi; | 
|  | int dev, vol; | 
|  | char *endptr; | 
|  |  | 
|  | /* First, try to open using the device node path method */ | 
|  | ubi = ubi_open_volume_path(name, mode); | 
|  | if (!IS_ERR(ubi)) | 
|  | return ubi; | 
|  |  | 
|  | /* Try the "nodev" method */ | 
|  | if (name[0] != 'u' || name[1] != 'b' || name[2] != 'i') | 
|  | return ERR_PTR(-EINVAL); | 
|  |  | 
|  | /* ubi:NAME method */ | 
|  | if ((name[3] == ':' || name[3] == '!') && name[4] != '\0') | 
|  | return ubi_open_volume_nm(0, name + 4, mode); | 
|  |  | 
|  | if (!isdigit(name[3])) | 
|  | return ERR_PTR(-EINVAL); | 
|  |  | 
|  | dev = simple_strtoul(name + 3, &endptr, 0); | 
|  |  | 
|  | /* ubiY method */ | 
|  | if (*endptr == '\0') | 
|  | return ubi_open_volume(0, dev, mode); | 
|  |  | 
|  | /* ubiX_Y method */ | 
|  | if (*endptr == '_' && isdigit(endptr[1])) { | 
|  | vol = simple_strtoul(endptr + 1, &endptr, 0); | 
|  | if (*endptr != '\0') | 
|  | return ERR_PTR(-EINVAL); | 
|  | return ubi_open_volume(dev, vol, mode); | 
|  | } | 
|  |  | 
|  | /* ubiX:NAME method */ | 
|  | if ((*endptr == ':' || *endptr == '!') && endptr[1] != '\0') | 
|  | return ubi_open_volume_nm(dev, ++endptr, mode); | 
|  |  | 
|  | return ERR_PTR(-EINVAL); | 
|  | } | 
|  |  | 
|  | static int ubifs_fill_super(struct super_block *sb, void *data, int silent) | 
|  | { | 
|  | struct ubi_volume_desc *ubi = sb->s_fs_info; | 
|  | struct ubifs_info *c; | 
|  | struct inode *root; | 
|  | int err; | 
|  |  | 
|  | c = kzalloc(sizeof(struct ubifs_info), GFP_KERNEL); | 
|  | if (!c) | 
|  | return -ENOMEM; | 
|  |  | 
|  | spin_lock_init(&c->cnt_lock); | 
|  | spin_lock_init(&c->cs_lock); | 
|  | spin_lock_init(&c->buds_lock); | 
|  | spin_lock_init(&c->space_lock); | 
|  | spin_lock_init(&c->orphan_lock); | 
|  | init_rwsem(&c->commit_sem); | 
|  | mutex_init(&c->lp_mutex); | 
|  | mutex_init(&c->tnc_mutex); | 
|  | mutex_init(&c->log_mutex); | 
|  | mutex_init(&c->mst_mutex); | 
|  | mutex_init(&c->umount_mutex); | 
|  | mutex_init(&c->bu_mutex); | 
|  | init_waitqueue_head(&c->cmt_wq); | 
|  | c->buds = RB_ROOT; | 
|  | c->old_idx = RB_ROOT; | 
|  | c->size_tree = RB_ROOT; | 
|  | c->orph_tree = RB_ROOT; | 
|  | INIT_LIST_HEAD(&c->infos_list); | 
|  | INIT_LIST_HEAD(&c->idx_gc); | 
|  | INIT_LIST_HEAD(&c->replay_list); | 
|  | INIT_LIST_HEAD(&c->replay_buds); | 
|  | INIT_LIST_HEAD(&c->uncat_list); | 
|  | INIT_LIST_HEAD(&c->empty_list); | 
|  | INIT_LIST_HEAD(&c->freeable_list); | 
|  | INIT_LIST_HEAD(&c->frdi_idx_list); | 
|  | INIT_LIST_HEAD(&c->unclean_leb_list); | 
|  | INIT_LIST_HEAD(&c->old_buds); | 
|  | INIT_LIST_HEAD(&c->orph_list); | 
|  | INIT_LIST_HEAD(&c->orph_new); | 
|  |  | 
|  | c->vfs_sb = sb; | 
|  | c->highest_inum = UBIFS_FIRST_INO; | 
|  | c->lhead_lnum = c->ltail_lnum = UBIFS_LOG_LNUM; | 
|  |  | 
|  | ubi_get_volume_info(ubi, &c->vi); | 
|  | ubi_get_device_info(c->vi.ubi_num, &c->di); | 
|  |  | 
|  | /* Re-open the UBI device in read-write mode */ | 
|  | c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READWRITE); | 
|  | if (IS_ERR(c->ubi)) { | 
|  | err = PTR_ERR(c->ubi); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * UBIFS provides 'backing_dev_info' in order to disable read-ahead. For | 
|  | * UBIFS, I/O is not deferred, it is done immediately in readpage, | 
|  | * which means the user would have to wait not just for their own I/O | 
|  | * but the read-ahead I/O as well i.e. completely pointless. | 
|  | * | 
|  | * Read-ahead will be disabled because @c->bdi.ra_pages is 0. | 
|  | */ | 
|  | c->bdi.name = "ubifs", | 
|  | c->bdi.capabilities = BDI_CAP_MAP_COPY; | 
|  | c->bdi.unplug_io_fn = default_unplug_io_fn; | 
|  | err  = bdi_init(&c->bdi); | 
|  | if (err) | 
|  | goto out_close; | 
|  | err = bdi_register(&c->bdi, NULL, "ubifs_%d_%d", | 
|  | c->vi.ubi_num, c->vi.vol_id); | 
|  | if (err) | 
|  | goto out_bdi; | 
|  |  | 
|  | err = ubifs_parse_options(c, data, 0); | 
|  | if (err) | 
|  | goto out_bdi; | 
|  |  | 
|  | sb->s_bdi = &c->bdi; | 
|  | sb->s_fs_info = c; | 
|  | sb->s_magic = UBIFS_SUPER_MAGIC; | 
|  | sb->s_blocksize = UBIFS_BLOCK_SIZE; | 
|  | sb->s_blocksize_bits = UBIFS_BLOCK_SHIFT; | 
|  | sb->s_maxbytes = c->max_inode_sz = key_max_inode_size(c); | 
|  | if (c->max_inode_sz > MAX_LFS_FILESIZE) | 
|  | sb->s_maxbytes = c->max_inode_sz = MAX_LFS_FILESIZE; | 
|  | sb->s_op = &ubifs_super_operations; | 
|  |  | 
|  | mutex_lock(&c->umount_mutex); | 
|  | err = mount_ubifs(c); | 
|  | if (err) { | 
|  | ubifs_assert(err < 0); | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | /* Read the root inode */ | 
|  | root = ubifs_iget(sb, UBIFS_ROOT_INO); | 
|  | if (IS_ERR(root)) { | 
|  | err = PTR_ERR(root); | 
|  | goto out_umount; | 
|  | } | 
|  |  | 
|  | sb->s_root = d_alloc_root(root); | 
|  | if (!sb->s_root) | 
|  | goto out_iput; | 
|  |  | 
|  | mutex_unlock(&c->umount_mutex); | 
|  | return 0; | 
|  |  | 
|  | out_iput: | 
|  | iput(root); | 
|  | out_umount: | 
|  | ubifs_umount(c); | 
|  | out_unlock: | 
|  | mutex_unlock(&c->umount_mutex); | 
|  | out_bdi: | 
|  | bdi_destroy(&c->bdi); | 
|  | out_close: | 
|  | ubi_close_volume(c->ubi); | 
|  | out_free: | 
|  | kfree(c); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int sb_test(struct super_block *sb, void *data) | 
|  | { | 
|  | dev_t *dev = data; | 
|  | struct ubifs_info *c = sb->s_fs_info; | 
|  |  | 
|  | return c->vi.cdev == *dev; | 
|  | } | 
|  |  | 
|  | static int ubifs_get_sb(struct file_system_type *fs_type, int flags, | 
|  | const char *name, void *data, struct vfsmount *mnt) | 
|  | { | 
|  | struct ubi_volume_desc *ubi; | 
|  | struct ubi_volume_info vi; | 
|  | struct super_block *sb; | 
|  | int err; | 
|  |  | 
|  | dbg_gen("name %s, flags %#x", name, flags); | 
|  |  | 
|  | /* | 
|  | * Get UBI device number and volume ID. Mount it read-only so far | 
|  | * because this might be a new mount point, and UBI allows only one | 
|  | * read-write user at a time. | 
|  | */ | 
|  | ubi = open_ubi(name, UBI_READONLY); | 
|  | if (IS_ERR(ubi)) { | 
|  | ubifs_err("cannot open \"%s\", error %d", | 
|  | name, (int)PTR_ERR(ubi)); | 
|  | return PTR_ERR(ubi); | 
|  | } | 
|  | ubi_get_volume_info(ubi, &vi); | 
|  |  | 
|  | dbg_gen("opened ubi%d_%d", vi.ubi_num, vi.vol_id); | 
|  |  | 
|  | sb = sget(fs_type, &sb_test, &set_anon_super, &vi.cdev); | 
|  | if (IS_ERR(sb)) { | 
|  | err = PTR_ERR(sb); | 
|  | goto out_close; | 
|  | } | 
|  |  | 
|  | if (sb->s_root) { | 
|  | /* A new mount point for already mounted UBIFS */ | 
|  | dbg_gen("this ubi volume is already mounted"); | 
|  | if ((flags ^ sb->s_flags) & MS_RDONLY) { | 
|  | err = -EBUSY; | 
|  | goto out_deact; | 
|  | } | 
|  | } else { | 
|  | sb->s_flags = flags; | 
|  | /* | 
|  | * Pass 'ubi' to 'fill_super()' in sb->s_fs_info where it is | 
|  | * replaced by 'c'. | 
|  | */ | 
|  | sb->s_fs_info = ubi; | 
|  | err = ubifs_fill_super(sb, data, flags & MS_SILENT ? 1 : 0); | 
|  | if (err) | 
|  | goto out_deact; | 
|  | /* We do not support atime */ | 
|  | sb->s_flags |= MS_ACTIVE | MS_NOATIME; | 
|  | } | 
|  |  | 
|  | /* 'fill_super()' opens ubi again so we must close it here */ | 
|  | ubi_close_volume(ubi); | 
|  |  | 
|  | simple_set_mnt(mnt, sb); | 
|  | return 0; | 
|  |  | 
|  | out_deact: | 
|  | deactivate_locked_super(sb); | 
|  | out_close: | 
|  | ubi_close_volume(ubi); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static struct file_system_type ubifs_fs_type = { | 
|  | .name    = "ubifs", | 
|  | .owner   = THIS_MODULE, | 
|  | .get_sb  = ubifs_get_sb, | 
|  | .kill_sb = kill_anon_super, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Inode slab cache constructor. | 
|  | */ | 
|  | static void inode_slab_ctor(void *obj) | 
|  | { | 
|  | struct ubifs_inode *ui = obj; | 
|  | inode_init_once(&ui->vfs_inode); | 
|  | } | 
|  |  | 
|  | static int __init ubifs_init(void) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | BUILD_BUG_ON(sizeof(struct ubifs_ch) != 24); | 
|  |  | 
|  | /* Make sure node sizes are 8-byte aligned */ | 
|  | BUILD_BUG_ON(UBIFS_CH_SZ        & 7); | 
|  | BUILD_BUG_ON(UBIFS_INO_NODE_SZ  & 7); | 
|  | BUILD_BUG_ON(UBIFS_DENT_NODE_SZ & 7); | 
|  | BUILD_BUG_ON(UBIFS_XENT_NODE_SZ & 7); | 
|  | BUILD_BUG_ON(UBIFS_DATA_NODE_SZ & 7); | 
|  | BUILD_BUG_ON(UBIFS_TRUN_NODE_SZ & 7); | 
|  | BUILD_BUG_ON(UBIFS_SB_NODE_SZ   & 7); | 
|  | BUILD_BUG_ON(UBIFS_MST_NODE_SZ  & 7); | 
|  | BUILD_BUG_ON(UBIFS_REF_NODE_SZ  & 7); | 
|  | BUILD_BUG_ON(UBIFS_CS_NODE_SZ   & 7); | 
|  | BUILD_BUG_ON(UBIFS_ORPH_NODE_SZ & 7); | 
|  |  | 
|  | BUILD_BUG_ON(UBIFS_MAX_DENT_NODE_SZ & 7); | 
|  | BUILD_BUG_ON(UBIFS_MAX_XENT_NODE_SZ & 7); | 
|  | BUILD_BUG_ON(UBIFS_MAX_DATA_NODE_SZ & 7); | 
|  | BUILD_BUG_ON(UBIFS_MAX_INO_NODE_SZ  & 7); | 
|  | BUILD_BUG_ON(UBIFS_MAX_NODE_SZ      & 7); | 
|  | BUILD_BUG_ON(MIN_WRITE_SZ           & 7); | 
|  |  | 
|  | /* Check min. node size */ | 
|  | BUILD_BUG_ON(UBIFS_INO_NODE_SZ  < MIN_WRITE_SZ); | 
|  | BUILD_BUG_ON(UBIFS_DENT_NODE_SZ < MIN_WRITE_SZ); | 
|  | BUILD_BUG_ON(UBIFS_XENT_NODE_SZ < MIN_WRITE_SZ); | 
|  | BUILD_BUG_ON(UBIFS_TRUN_NODE_SZ < MIN_WRITE_SZ); | 
|  |  | 
|  | BUILD_BUG_ON(UBIFS_MAX_DENT_NODE_SZ > UBIFS_MAX_NODE_SZ); | 
|  | BUILD_BUG_ON(UBIFS_MAX_XENT_NODE_SZ > UBIFS_MAX_NODE_SZ); | 
|  | BUILD_BUG_ON(UBIFS_MAX_DATA_NODE_SZ > UBIFS_MAX_NODE_SZ); | 
|  | BUILD_BUG_ON(UBIFS_MAX_INO_NODE_SZ  > UBIFS_MAX_NODE_SZ); | 
|  |  | 
|  | /* Defined node sizes */ | 
|  | BUILD_BUG_ON(UBIFS_SB_NODE_SZ  != 4096); | 
|  | BUILD_BUG_ON(UBIFS_MST_NODE_SZ != 512); | 
|  | BUILD_BUG_ON(UBIFS_INO_NODE_SZ != 160); | 
|  | BUILD_BUG_ON(UBIFS_REF_NODE_SZ != 64); | 
|  |  | 
|  | /* | 
|  | * We use 2 bit wide bit-fields to store compression type, which should | 
|  | * be amended if more compressors are added. The bit-fields are: | 
|  | * @compr_type in 'struct ubifs_inode', @default_compr in | 
|  | * 'struct ubifs_info' and @compr_type in 'struct ubifs_mount_opts'. | 
|  | */ | 
|  | BUILD_BUG_ON(UBIFS_COMPR_TYPES_CNT > 4); | 
|  |  | 
|  | /* | 
|  | * We require that PAGE_CACHE_SIZE is greater-than-or-equal-to | 
|  | * UBIFS_BLOCK_SIZE. It is assumed that both are powers of 2. | 
|  | */ | 
|  | if (PAGE_CACHE_SIZE < UBIFS_BLOCK_SIZE) { | 
|  | ubifs_err("VFS page cache size is %u bytes, but UBIFS requires" | 
|  | " at least 4096 bytes", | 
|  | (unsigned int)PAGE_CACHE_SIZE); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | err = register_filesystem(&ubifs_fs_type); | 
|  | if (err) { | 
|  | ubifs_err("cannot register file system, error %d", err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | err = -ENOMEM; | 
|  | ubifs_inode_slab = kmem_cache_create("ubifs_inode_slab", | 
|  | sizeof(struct ubifs_inode), 0, | 
|  | SLAB_MEM_SPREAD | SLAB_RECLAIM_ACCOUNT, | 
|  | &inode_slab_ctor); | 
|  | if (!ubifs_inode_slab) | 
|  | goto out_reg; | 
|  |  | 
|  | register_shrinker(&ubifs_shrinker_info); | 
|  |  | 
|  | err = ubifs_compressors_init(); | 
|  | if (err) | 
|  | goto out_shrinker; | 
|  |  | 
|  | err = dbg_debugfs_init(); | 
|  | if (err) | 
|  | goto out_compr; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_compr: | 
|  | ubifs_compressors_exit(); | 
|  | out_shrinker: | 
|  | unregister_shrinker(&ubifs_shrinker_info); | 
|  | kmem_cache_destroy(ubifs_inode_slab); | 
|  | out_reg: | 
|  | unregister_filesystem(&ubifs_fs_type); | 
|  | return err; | 
|  | } | 
|  | /* late_initcall to let compressors initialize first */ | 
|  | late_initcall(ubifs_init); | 
|  |  | 
|  | static void __exit ubifs_exit(void) | 
|  | { | 
|  | ubifs_assert(list_empty(&ubifs_infos)); | 
|  | ubifs_assert(atomic_long_read(&ubifs_clean_zn_cnt) == 0); | 
|  |  | 
|  | dbg_debugfs_exit(); | 
|  | ubifs_compressors_exit(); | 
|  | unregister_shrinker(&ubifs_shrinker_info); | 
|  | kmem_cache_destroy(ubifs_inode_slab); | 
|  | unregister_filesystem(&ubifs_fs_type); | 
|  | } | 
|  | module_exit(ubifs_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(__stringify(UBIFS_VERSION)); | 
|  | MODULE_AUTHOR("Artem Bityutskiy, Adrian Hunter"); | 
|  | MODULE_DESCRIPTION("UBIFS - UBI File System"); |