| # SPDX-License-Identifier: GPL-2.0 |
| obj-$(CONFIG_PCIE_CADENCE) += pcie-cadence.o |
| obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host.o |
| obj-$(CONFIG_PCIE_CADENCE_EP) += pcie-cadence-ep.o |
| obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o |
| obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o |
| obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o |
| obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o |
| obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o |
| obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o |
| obj-$(CONFIG_PCIE_RCAR) += pcie-rcar.o |
| obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o |
| obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o |
| obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o |
| obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o |
| obj-$(CONFIG_PCI_V3_SEMI) += pci-v3-semi.o |
| obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o |
| obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o |
| obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o |
| obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o |
| obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o |
| obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o |
| obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o |
| obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o |
| obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o |
| obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o |
| obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o |
| obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o |
| obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o |
| obj-$(CONFIG_VMD) += vmd.o |
| # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW |
| obj-y += dwc/ |
| |
| |
| # The following drivers are for devices that use the generic ACPI |
| # pci_root.c driver but don't support standard ECAM config access. |
| # They contain MCFG quirks to replace the generic ECAM accessors with |
| # device-specific ones that are shared with the DT driver. |
| |
| # The ACPI driver is generic and should not require driver-specific |
| # config options to be enabled, so we always build these drivers on |
| # ARM64 and use internal ifdefs to only build the pieces we need |
| # depending on whether ACPI, the DT driver, or both are enabled. |
| |
| ifdef CONFIG_PCI |
| obj-$(CONFIG_ARM64) += pci-thunder-ecam.o |
| obj-$(CONFIG_ARM64) += pci-thunder-pem.o |
| obj-$(CONFIG_ARM64) += pci-xgene.o |
| endif |