| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * CPU frequency scaling support for Armada 37xx platform. |
| * |
| * Copyright (C) 2017 Marvell |
| * |
| * Gregory CLEMENT <gregory.clement@free-electrons.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/cpu.h> |
| #include <linux/cpufreq.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_opp.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| #include "cpufreq-dt.h" |
| |
| /* Power management in North Bridge register set */ |
| #define ARMADA_37XX_NB_L0L1 0x18 |
| #define ARMADA_37XX_NB_L2L3 0x1C |
| #define ARMADA_37XX_NB_TBG_DIV_OFF 13 |
| #define ARMADA_37XX_NB_TBG_DIV_MASK 0x7 |
| #define ARMADA_37XX_NB_CLK_SEL_OFF 11 |
| #define ARMADA_37XX_NB_CLK_SEL_MASK 0x1 |
| #define ARMADA_37XX_NB_CLK_SEL_TBG 0x1 |
| #define ARMADA_37XX_NB_TBG_SEL_OFF 9 |
| #define ARMADA_37XX_NB_TBG_SEL_MASK 0x3 |
| #define ARMADA_37XX_NB_VDD_SEL_OFF 6 |
| #define ARMADA_37XX_NB_VDD_SEL_MASK 0x3 |
| #define ARMADA_37XX_NB_CONFIG_SHIFT 16 |
| #define ARMADA_37XX_NB_DYN_MOD 0x24 |
| #define ARMADA_37XX_NB_CLK_SEL_EN BIT(26) |
| #define ARMADA_37XX_NB_TBG_EN BIT(28) |
| #define ARMADA_37XX_NB_DIV_EN BIT(29) |
| #define ARMADA_37XX_NB_VDD_EN BIT(30) |
| #define ARMADA_37XX_NB_DFS_EN BIT(31) |
| #define ARMADA_37XX_NB_CPU_LOAD 0x30 |
| #define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3 |
| #define ARMADA_37XX_DVFS_LOAD_0 0 |
| #define ARMADA_37XX_DVFS_LOAD_1 1 |
| #define ARMADA_37XX_DVFS_LOAD_2 2 |
| #define ARMADA_37XX_DVFS_LOAD_3 3 |
| |
| /* |
| * On Armada 37xx the Power management manages 4 level of CPU load, |
| * each level can be associated with a CPU clock source, a CPU |
| * divider, a VDD level, etc... |
| */ |
| #define LOAD_LEVEL_NR 4 |
| |
| struct armada37xx_cpufreq_state { |
| struct regmap *regmap; |
| u32 nb_l0l1; |
| u32 nb_l2l3; |
| u32 nb_dyn_mod; |
| u32 nb_cpu_load; |
| }; |
| |
| static struct armada37xx_cpufreq_state *armada37xx_cpufreq_state; |
| |
| struct armada_37xx_dvfs { |
| u32 cpu_freq_max; |
| u8 divider[LOAD_LEVEL_NR]; |
| }; |
| |
| static struct armada_37xx_dvfs armada_37xx_dvfs[] = { |
| {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} }, |
| {.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} }, |
| {.cpu_freq_max = 800*1000*1000, .divider = {1, 2, 3, 4} }, |
| {.cpu_freq_max = 600*1000*1000, .divider = {2, 4, 5, 6} }, |
| }; |
| |
| static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(armada_37xx_dvfs); i++) { |
| if (freq == armada_37xx_dvfs[i].cpu_freq_max) |
| return &armada_37xx_dvfs[i]; |
| } |
| |
| pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000); |
| return NULL; |
| } |
| |
| /* |
| * Setup the four level managed by the hardware. Once the four level |
| * will be configured then the DVFS will be enabled. |
| */ |
| static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base, |
| struct clk *clk, u8 *divider) |
| { |
| int load_lvl; |
| struct clk *parent; |
| |
| for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) { |
| unsigned int reg, mask, val, offset = 0; |
| |
| if (load_lvl <= ARMADA_37XX_DVFS_LOAD_1) |
| reg = ARMADA_37XX_NB_L0L1; |
| else |
| reg = ARMADA_37XX_NB_L2L3; |
| |
| if (load_lvl == ARMADA_37XX_DVFS_LOAD_0 || |
| load_lvl == ARMADA_37XX_DVFS_LOAD_2) |
| offset += ARMADA_37XX_NB_CONFIG_SHIFT; |
| |
| /* Set cpu clock source, for all the level we use TBG */ |
| val = ARMADA_37XX_NB_CLK_SEL_TBG << ARMADA_37XX_NB_CLK_SEL_OFF; |
| mask = (ARMADA_37XX_NB_CLK_SEL_MASK |
| << ARMADA_37XX_NB_CLK_SEL_OFF); |
| |
| /* |
| * Set cpu divider based on the pre-computed array in |
| * order to have balanced step. |
| */ |
| val |= divider[load_lvl] << ARMADA_37XX_NB_TBG_DIV_OFF; |
| mask |= (ARMADA_37XX_NB_TBG_DIV_MASK |
| << ARMADA_37XX_NB_TBG_DIV_OFF); |
| |
| /* Set VDD divider which is actually the load level. */ |
| val |= load_lvl << ARMADA_37XX_NB_VDD_SEL_OFF; |
| mask |= (ARMADA_37XX_NB_VDD_SEL_MASK |
| << ARMADA_37XX_NB_VDD_SEL_OFF); |
| |
| val <<= offset; |
| mask <<= offset; |
| |
| regmap_update_bits(base, reg, mask, val); |
| } |
| |
| /* |
| * Set cpu clock source, for all the level we keep the same |
| * clock source that the one already configured. For this one |
| * we need to use the clock framework |
| */ |
| parent = clk_get_parent(clk); |
| clk_set_parent(clk, parent); |
| } |
| |
| static void armada37xx_cpufreq_disable_dvfs(struct regmap *base) |
| { |
| unsigned int reg = ARMADA_37XX_NB_DYN_MOD, |
| mask = ARMADA_37XX_NB_DFS_EN; |
| |
| regmap_update_bits(base, reg, mask, 0); |
| } |
| |
| static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base) |
| { |
| unsigned int val, reg = ARMADA_37XX_NB_CPU_LOAD, |
| mask = ARMADA_37XX_NB_CPU_LOAD_MASK; |
| |
| /* Start with the highest load (0) */ |
| val = ARMADA_37XX_DVFS_LOAD_0; |
| regmap_update_bits(base, reg, mask, val); |
| |
| /* Now enable DVFS for the CPUs */ |
| reg = ARMADA_37XX_NB_DYN_MOD; |
| mask = ARMADA_37XX_NB_CLK_SEL_EN | ARMADA_37XX_NB_TBG_EN | |
| ARMADA_37XX_NB_DIV_EN | ARMADA_37XX_NB_VDD_EN | |
| ARMADA_37XX_NB_DFS_EN; |
| |
| regmap_update_bits(base, reg, mask, mask); |
| } |
| |
| static int armada37xx_cpufreq_suspend(struct cpufreq_policy *policy) |
| { |
| struct armada37xx_cpufreq_state *state = armada37xx_cpufreq_state; |
| |
| regmap_read(state->regmap, ARMADA_37XX_NB_L0L1, &state->nb_l0l1); |
| regmap_read(state->regmap, ARMADA_37XX_NB_L2L3, &state->nb_l2l3); |
| regmap_read(state->regmap, ARMADA_37XX_NB_CPU_LOAD, |
| &state->nb_cpu_load); |
| regmap_read(state->regmap, ARMADA_37XX_NB_DYN_MOD, &state->nb_dyn_mod); |
| |
| return 0; |
| } |
| |
| static int armada37xx_cpufreq_resume(struct cpufreq_policy *policy) |
| { |
| struct armada37xx_cpufreq_state *state = armada37xx_cpufreq_state; |
| |
| /* Ensure DVFS is disabled otherwise the following registers are RO */ |
| armada37xx_cpufreq_disable_dvfs(state->regmap); |
| |
| regmap_write(state->regmap, ARMADA_37XX_NB_L0L1, state->nb_l0l1); |
| regmap_write(state->regmap, ARMADA_37XX_NB_L2L3, state->nb_l2l3); |
| regmap_write(state->regmap, ARMADA_37XX_NB_CPU_LOAD, |
| state->nb_cpu_load); |
| |
| /* |
| * NB_DYN_MOD register is the one that actually enable back DVFS if it |
| * was enabled before the suspend operation. This must be done last |
| * otherwise other registers are not writable. |
| */ |
| regmap_write(state->regmap, ARMADA_37XX_NB_DYN_MOD, state->nb_dyn_mod); |
| |
| return 0; |
| } |
| |
| static int __init armada37xx_cpufreq_driver_init(void) |
| { |
| struct cpufreq_dt_platform_data pdata; |
| struct armada_37xx_dvfs *dvfs; |
| struct platform_device *pdev; |
| unsigned long freq; |
| unsigned int cur_frequency; |
| struct regmap *nb_pm_base; |
| struct device *cpu_dev; |
| int load_lvl, ret; |
| struct clk *clk; |
| |
| nb_pm_base = |
| syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm"); |
| |
| if (IS_ERR(nb_pm_base)) |
| return -ENODEV; |
| |
| /* Before doing any configuration on the DVFS first, disable it */ |
| armada37xx_cpufreq_disable_dvfs(nb_pm_base); |
| |
| /* |
| * On CPU 0 register the operating points supported (which are |
| * the nominal CPU frequency and full integer divisions of |
| * it). |
| */ |
| cpu_dev = get_cpu_device(0); |
| if (!cpu_dev) { |
| dev_err(cpu_dev, "Cannot get CPU\n"); |
| return -ENODEV; |
| } |
| |
| clk = clk_get(cpu_dev, 0); |
| if (IS_ERR(clk)) { |
| dev_err(cpu_dev, "Cannot get clock for CPU0\n"); |
| return PTR_ERR(clk); |
| } |
| |
| /* Get nominal (current) CPU frequency */ |
| cur_frequency = clk_get_rate(clk); |
| if (!cur_frequency) { |
| dev_err(cpu_dev, "Failed to get clock rate for CPU\n"); |
| clk_put(clk); |
| return -EINVAL; |
| } |
| |
| dvfs = armada_37xx_cpu_freq_info_get(cur_frequency); |
| if (!dvfs) { |
| clk_put(clk); |
| return -EINVAL; |
| } |
| |
| armada37xx_cpufreq_state = kmalloc(sizeof(*armada37xx_cpufreq_state), |
| GFP_KERNEL); |
| if (!armada37xx_cpufreq_state) { |
| clk_put(clk); |
| return -ENOMEM; |
| } |
| |
| armada37xx_cpufreq_state->regmap = nb_pm_base; |
| |
| armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider); |
| clk_put(clk); |
| |
| for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR; |
| load_lvl++) { |
| freq = cur_frequency / dvfs->divider[load_lvl]; |
| |
| ret = dev_pm_opp_add(cpu_dev, freq, 0); |
| if (ret) |
| goto remove_opp; |
| } |
| |
| /* Now that everything is setup, enable the DVFS at hardware level */ |
| armada37xx_cpufreq_enable_dvfs(nb_pm_base); |
| |
| pdata.suspend = armada37xx_cpufreq_suspend; |
| pdata.resume = armada37xx_cpufreq_resume; |
| |
| pdev = platform_device_register_data(NULL, "cpufreq-dt", -1, &pdata, |
| sizeof(pdata)); |
| ret = PTR_ERR_OR_ZERO(pdev); |
| if (ret) |
| goto disable_dvfs; |
| |
| return 0; |
| |
| disable_dvfs: |
| armada37xx_cpufreq_disable_dvfs(nb_pm_base); |
| remove_opp: |
| /* clean-up the already added opp before leaving */ |
| while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) { |
| freq = cur_frequency / dvfs->divider[load_lvl]; |
| dev_pm_opp_remove(cpu_dev, freq); |
| } |
| |
| kfree(armada37xx_cpufreq_state); |
| |
| return ret; |
| } |
| /* late_initcall, to guarantee the driver is loaded after A37xx clock driver */ |
| late_initcall(armada37xx_cpufreq_driver_init); |
| |
| MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>"); |
| MODULE_DESCRIPTION("Armada 37xx cpufreq driver"); |
| MODULE_LICENSE("GPL"); |