| /* | |
| * Copyright 2002-2005, Instant802 Networks, Inc. | |
| * Copyright 2005-2006, Devicescape Software, Inc. | |
| * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> | |
| * Copyright 2008-2011 Luis R. Rodriguez <mcgrof@qca.qualcomm.com> | |
| * Copyright 2013-2014 Intel Mobile Communications GmbH | |
| * Copyright 2017 Intel Deutschland GmbH | |
| * | |
| * Permission to use, copy, modify, and/or distribute this software for any | |
| * purpose with or without fee is hereby granted, provided that the above | |
| * copyright notice and this permission notice appear in all copies. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
| */ | |
| /** | |
| * DOC: Wireless regulatory infrastructure | |
| * | |
| * The usual implementation is for a driver to read a device EEPROM to | |
| * determine which regulatory domain it should be operating under, then | |
| * looking up the allowable channels in a driver-local table and finally | |
| * registering those channels in the wiphy structure. | |
| * | |
| * Another set of compliance enforcement is for drivers to use their | |
| * own compliance limits which can be stored on the EEPROM. The host | |
| * driver or firmware may ensure these are used. | |
| * | |
| * In addition to all this we provide an extra layer of regulatory | |
| * conformance. For drivers which do not have any regulatory | |
| * information CRDA provides the complete regulatory solution. | |
| * For others it provides a community effort on further restrictions | |
| * to enhance compliance. | |
| * | |
| * Note: When number of rules --> infinity we will not be able to | |
| * index on alpha2 any more, instead we'll probably have to | |
| * rely on some SHA1 checksum of the regdomain for example. | |
| * | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/kernel.h> | |
| #include <linux/export.h> | |
| #include <linux/slab.h> | |
| #include <linux/list.h> | |
| #include <linux/ctype.h> | |
| #include <linux/nl80211.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/moduleparam.h> | |
| #include <net/cfg80211.h> | |
| #include "core.h" | |
| #include "reg.h" | |
| #include "rdev-ops.h" | |
| #include "regdb.h" | |
| #include "nl80211.h" | |
| /* | |
| * Grace period we give before making sure all current interfaces reside on | |
| * channels allowed by the current regulatory domain. | |
| */ | |
| #define REG_ENFORCE_GRACE_MS 60000 | |
| /** | |
| * enum reg_request_treatment - regulatory request treatment | |
| * | |
| * @REG_REQ_OK: continue processing the regulatory request | |
| * @REG_REQ_IGNORE: ignore the regulatory request | |
| * @REG_REQ_INTERSECT: the regulatory domain resulting from this request should | |
| * be intersected with the current one. | |
| * @REG_REQ_ALREADY_SET: the regulatory request will not change the current | |
| * regulatory settings, and no further processing is required. | |
| */ | |
| enum reg_request_treatment { | |
| REG_REQ_OK, | |
| REG_REQ_IGNORE, | |
| REG_REQ_INTERSECT, | |
| REG_REQ_ALREADY_SET, | |
| }; | |
| static struct regulatory_request core_request_world = { | |
| .initiator = NL80211_REGDOM_SET_BY_CORE, | |
| .alpha2[0] = '0', | |
| .alpha2[1] = '0', | |
| .intersect = false, | |
| .processed = true, | |
| .country_ie_env = ENVIRON_ANY, | |
| }; | |
| /* | |
| * Receipt of information from last regulatory request, | |
| * protected by RTNL (and can be accessed with RCU protection) | |
| */ | |
| static struct regulatory_request __rcu *last_request = | |
| (void __force __rcu *)&core_request_world; | |
| /* To trigger userspace events */ | |
| static struct platform_device *reg_pdev; | |
| /* | |
| * Central wireless core regulatory domains, we only need two, | |
| * the current one and a world regulatory domain in case we have no | |
| * information to give us an alpha2. | |
| * (protected by RTNL, can be read under RCU) | |
| */ | |
| const struct ieee80211_regdomain __rcu *cfg80211_regdomain; | |
| /* | |
| * Number of devices that registered to the core | |
| * that support cellular base station regulatory hints | |
| * (protected by RTNL) | |
| */ | |
| static int reg_num_devs_support_basehint; | |
| /* | |
| * State variable indicating if the platform on which the devices | |
| * are attached is operating in an indoor environment. The state variable | |
| * is relevant for all registered devices. | |
| */ | |
| static bool reg_is_indoor; | |
| static spinlock_t reg_indoor_lock; | |
| /* Used to track the userspace process controlling the indoor setting */ | |
| static u32 reg_is_indoor_portid; | |
| static void restore_regulatory_settings(bool reset_user); | |
| static const struct ieee80211_regdomain *get_cfg80211_regdom(void) | |
| { | |
| return rtnl_dereference(cfg80211_regdomain); | |
| } | |
| const struct ieee80211_regdomain *get_wiphy_regdom(struct wiphy *wiphy) | |
| { | |
| return rtnl_dereference(wiphy->regd); | |
| } | |
| static const char *reg_dfs_region_str(enum nl80211_dfs_regions dfs_region) | |
| { | |
| switch (dfs_region) { | |
| case NL80211_DFS_UNSET: | |
| return "unset"; | |
| case NL80211_DFS_FCC: | |
| return "FCC"; | |
| case NL80211_DFS_ETSI: | |
| return "ETSI"; | |
| case NL80211_DFS_JP: | |
| return "JP"; | |
| } | |
| return "Unknown"; | |
| } | |
| enum nl80211_dfs_regions reg_get_dfs_region(struct wiphy *wiphy) | |
| { | |
| const struct ieee80211_regdomain *regd = NULL; | |
| const struct ieee80211_regdomain *wiphy_regd = NULL; | |
| regd = get_cfg80211_regdom(); | |
| if (!wiphy) | |
| goto out; | |
| wiphy_regd = get_wiphy_regdom(wiphy); | |
| if (!wiphy_regd) | |
| goto out; | |
| if (wiphy_regd->dfs_region == regd->dfs_region) | |
| goto out; | |
| pr_debug("%s: device specific dfs_region (%s) disagrees with cfg80211's central dfs_region (%s)\n", | |
| dev_name(&wiphy->dev), | |
| reg_dfs_region_str(wiphy_regd->dfs_region), | |
| reg_dfs_region_str(regd->dfs_region)); | |
| out: | |
| return regd->dfs_region; | |
| } | |
| static void rcu_free_regdom(const struct ieee80211_regdomain *r) | |
| { | |
| if (!r) | |
| return; | |
| kfree_rcu((struct ieee80211_regdomain *)r, rcu_head); | |
| } | |
| static struct regulatory_request *get_last_request(void) | |
| { | |
| return rcu_dereference_rtnl(last_request); | |
| } | |
| /* Used to queue up regulatory hints */ | |
| static LIST_HEAD(reg_requests_list); | |
| static spinlock_t reg_requests_lock; | |
| /* Used to queue up beacon hints for review */ | |
| static LIST_HEAD(reg_pending_beacons); | |
| static spinlock_t reg_pending_beacons_lock; | |
| /* Used to keep track of processed beacon hints */ | |
| static LIST_HEAD(reg_beacon_list); | |
| struct reg_beacon { | |
| struct list_head list; | |
| struct ieee80211_channel chan; | |
| }; | |
| static void reg_check_chans_work(struct work_struct *work); | |
| static DECLARE_DELAYED_WORK(reg_check_chans, reg_check_chans_work); | |
| static void reg_todo(struct work_struct *work); | |
| static DECLARE_WORK(reg_work, reg_todo); | |
| /* We keep a static world regulatory domain in case of the absence of CRDA */ | |
| static const struct ieee80211_regdomain world_regdom = { | |
| .n_reg_rules = 8, | |
| .alpha2 = "00", | |
| .reg_rules = { | |
| /* IEEE 802.11b/g, channels 1..11 */ | |
| REG_RULE(2412-10, 2462+10, 40, 6, 20, 0), | |
| /* IEEE 802.11b/g, channels 12..13. */ | |
| REG_RULE(2467-10, 2472+10, 20, 6, 20, | |
| NL80211_RRF_NO_IR | NL80211_RRF_AUTO_BW), | |
| /* IEEE 802.11 channel 14 - Only JP enables | |
| * this and for 802.11b only */ | |
| REG_RULE(2484-10, 2484+10, 20, 6, 20, | |
| NL80211_RRF_NO_IR | | |
| NL80211_RRF_NO_OFDM), | |
| /* IEEE 802.11a, channel 36..48 */ | |
| REG_RULE(5180-10, 5240+10, 80, 6, 20, | |
| NL80211_RRF_NO_IR | | |
| NL80211_RRF_AUTO_BW), | |
| /* IEEE 802.11a, channel 52..64 - DFS required */ | |
| REG_RULE(5260-10, 5320+10, 80, 6, 20, | |
| NL80211_RRF_NO_IR | | |
| NL80211_RRF_AUTO_BW | | |
| NL80211_RRF_DFS), | |
| /* IEEE 802.11a, channel 100..144 - DFS required */ | |
| REG_RULE(5500-10, 5720+10, 160, 6, 20, | |
| NL80211_RRF_NO_IR | | |
| NL80211_RRF_DFS), | |
| /* IEEE 802.11a, channel 149..165 */ | |
| REG_RULE(5745-10, 5825+10, 80, 6, 20, | |
| NL80211_RRF_NO_IR), | |
| /* IEEE 802.11ad (60GHz), channels 1..3 */ | |
| REG_RULE(56160+2160*1-1080, 56160+2160*3+1080, 2160, 0, 0, 0), | |
| } | |
| }; | |
| /* protected by RTNL */ | |
| static const struct ieee80211_regdomain *cfg80211_world_regdom = | |
| &world_regdom; | |
| static char *ieee80211_regdom = "00"; | |
| static char user_alpha2[2]; | |
| module_param(ieee80211_regdom, charp, 0444); | |
| MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); | |
| static void reg_free_request(struct regulatory_request *request) | |
| { | |
| if (request == &core_request_world) | |
| return; | |
| if (request != get_last_request()) | |
| kfree(request); | |
| } | |
| static void reg_free_last_request(void) | |
| { | |
| struct regulatory_request *lr = get_last_request(); | |
| if (lr != &core_request_world && lr) | |
| kfree_rcu(lr, rcu_head); | |
| } | |
| static void reg_update_last_request(struct regulatory_request *request) | |
| { | |
| struct regulatory_request *lr; | |
| lr = get_last_request(); | |
| if (lr == request) | |
| return; | |
| reg_free_last_request(); | |
| rcu_assign_pointer(last_request, request); | |
| } | |
| static void reset_regdomains(bool full_reset, | |
| const struct ieee80211_regdomain *new_regdom) | |
| { | |
| const struct ieee80211_regdomain *r; | |
| ASSERT_RTNL(); | |
| r = get_cfg80211_regdom(); | |
| /* avoid freeing static information or freeing something twice */ | |
| if (r == cfg80211_world_regdom) | |
| r = NULL; | |
| if (cfg80211_world_regdom == &world_regdom) | |
| cfg80211_world_regdom = NULL; | |
| if (r == &world_regdom) | |
| r = NULL; | |
| rcu_free_regdom(r); | |
| rcu_free_regdom(cfg80211_world_regdom); | |
| cfg80211_world_regdom = &world_regdom; | |
| rcu_assign_pointer(cfg80211_regdomain, new_regdom); | |
| if (!full_reset) | |
| return; | |
| reg_update_last_request(&core_request_world); | |
| } | |
| /* | |
| * Dynamic world regulatory domain requested by the wireless | |
| * core upon initialization | |
| */ | |
| static void update_world_regdomain(const struct ieee80211_regdomain *rd) | |
| { | |
| struct regulatory_request *lr; | |
| lr = get_last_request(); | |
| WARN_ON(!lr); | |
| reset_regdomains(false, rd); | |
| cfg80211_world_regdom = rd; | |
| } | |
| bool is_world_regdom(const char *alpha2) | |
| { | |
| if (!alpha2) | |
| return false; | |
| return alpha2[0] == '0' && alpha2[1] == '0'; | |
| } | |
| static bool is_alpha2_set(const char *alpha2) | |
| { | |
| if (!alpha2) | |
| return false; | |
| return alpha2[0] && alpha2[1]; | |
| } | |
| static bool is_unknown_alpha2(const char *alpha2) | |
| { | |
| if (!alpha2) | |
| return false; | |
| /* | |
| * Special case where regulatory domain was built by driver | |
| * but a specific alpha2 cannot be determined | |
| */ | |
| return alpha2[0] == '9' && alpha2[1] == '9'; | |
| } | |
| static bool is_intersected_alpha2(const char *alpha2) | |
| { | |
| if (!alpha2) | |
| return false; | |
| /* | |
| * Special case where regulatory domain is the | |
| * result of an intersection between two regulatory domain | |
| * structures | |
| */ | |
| return alpha2[0] == '9' && alpha2[1] == '8'; | |
| } | |
| static bool is_an_alpha2(const char *alpha2) | |
| { | |
| if (!alpha2) | |
| return false; | |
| return isalpha(alpha2[0]) && isalpha(alpha2[1]); | |
| } | |
| static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y) | |
| { | |
| if (!alpha2_x || !alpha2_y) | |
| return false; | |
| return alpha2_x[0] == alpha2_y[0] && alpha2_x[1] == alpha2_y[1]; | |
| } | |
| static bool regdom_changes(const char *alpha2) | |
| { | |
| const struct ieee80211_regdomain *r = get_cfg80211_regdom(); | |
| if (!r) | |
| return true; | |
| return !alpha2_equal(r->alpha2, alpha2); | |
| } | |
| /* | |
| * The NL80211_REGDOM_SET_BY_USER regdom alpha2 is cached, this lets | |
| * you know if a valid regulatory hint with NL80211_REGDOM_SET_BY_USER | |
| * has ever been issued. | |
| */ | |
| static bool is_user_regdom_saved(void) | |
| { | |
| if (user_alpha2[0] == '9' && user_alpha2[1] == '7') | |
| return false; | |
| /* This would indicate a mistake on the design */ | |
| if (WARN(!is_world_regdom(user_alpha2) && !is_an_alpha2(user_alpha2), | |
| "Unexpected user alpha2: %c%c\n", | |
| user_alpha2[0], user_alpha2[1])) | |
| return false; | |
| return true; | |
| } | |
| static const struct ieee80211_regdomain * | |
| reg_copy_regd(const struct ieee80211_regdomain *src_regd) | |
| { | |
| struct ieee80211_regdomain *regd; | |
| int size_of_regd; | |
| unsigned int i; | |
| size_of_regd = | |
| sizeof(struct ieee80211_regdomain) + | |
| src_regd->n_reg_rules * sizeof(struct ieee80211_reg_rule); | |
| regd = kzalloc(size_of_regd, GFP_KERNEL); | |
| if (!regd) | |
| return ERR_PTR(-ENOMEM); | |
| memcpy(regd, src_regd, sizeof(struct ieee80211_regdomain)); | |
| for (i = 0; i < src_regd->n_reg_rules; i++) | |
| memcpy(®d->reg_rules[i], &src_regd->reg_rules[i], | |
| sizeof(struct ieee80211_reg_rule)); | |
| return regd; | |
| } | |
| #ifdef CONFIG_CFG80211_INTERNAL_REGDB | |
| struct reg_regdb_apply_request { | |
| struct list_head list; | |
| const struct ieee80211_regdomain *regdom; | |
| }; | |
| static LIST_HEAD(reg_regdb_apply_list); | |
| static DEFINE_MUTEX(reg_regdb_apply_mutex); | |
| static void reg_regdb_apply(struct work_struct *work) | |
| { | |
| struct reg_regdb_apply_request *request; | |
| rtnl_lock(); | |
| mutex_lock(®_regdb_apply_mutex); | |
| while (!list_empty(®_regdb_apply_list)) { | |
| request = list_first_entry(®_regdb_apply_list, | |
| struct reg_regdb_apply_request, | |
| list); | |
| list_del(&request->list); | |
| set_regdom(request->regdom, REGD_SOURCE_INTERNAL_DB); | |
| kfree(request); | |
| } | |
| mutex_unlock(®_regdb_apply_mutex); | |
| rtnl_unlock(); | |
| } | |
| static DECLARE_WORK(reg_regdb_work, reg_regdb_apply); | |
| static int reg_query_builtin(const char *alpha2) | |
| { | |
| const struct ieee80211_regdomain *regdom = NULL; | |
| struct reg_regdb_apply_request *request; | |
| unsigned int i; | |
| for (i = 0; i < reg_regdb_size; i++) { | |
| if (alpha2_equal(alpha2, reg_regdb[i]->alpha2)) { | |
| regdom = reg_regdb[i]; | |
| break; | |
| } | |
| } | |
| if (!regdom) | |
| return -ENODATA; | |
| request = kzalloc(sizeof(struct reg_regdb_apply_request), GFP_KERNEL); | |
| if (!request) | |
| return -ENOMEM; | |
| request->regdom = reg_copy_regd(regdom); | |
| if (IS_ERR_OR_NULL(request->regdom)) { | |
| kfree(request); | |
| return -ENOMEM; | |
| } | |
| mutex_lock(®_regdb_apply_mutex); | |
| list_add_tail(&request->list, ®_regdb_apply_list); | |
| mutex_unlock(®_regdb_apply_mutex); | |
| schedule_work(®_regdb_work); | |
| return 0; | |
| } | |
| /* Feel free to add any other sanity checks here */ | |
| static void reg_regdb_size_check(void) | |
| { | |
| /* We should ideally BUILD_BUG_ON() but then random builds would fail */ | |
| WARN_ONCE(!reg_regdb_size, "db.txt is empty, you should update it..."); | |
| } | |
| #else | |
| static inline void reg_regdb_size_check(void) {} | |
| static inline int reg_query_builtin(const char *alpha2) | |
| { | |
| return -ENODATA; | |
| } | |
| #endif /* CONFIG_CFG80211_INTERNAL_REGDB */ | |
| #ifdef CONFIG_CFG80211_CRDA_SUPPORT | |
| /* Max number of consecutive attempts to communicate with CRDA */ | |
| #define REG_MAX_CRDA_TIMEOUTS 10 | |
| static u32 reg_crda_timeouts; | |
| static void crda_timeout_work(struct work_struct *work); | |
| static DECLARE_DELAYED_WORK(crda_timeout, crda_timeout_work); | |
| static void crda_timeout_work(struct work_struct *work) | |
| { | |
| pr_debug("Timeout while waiting for CRDA to reply, restoring regulatory settings\n"); | |
| rtnl_lock(); | |
| reg_crda_timeouts++; | |
| restore_regulatory_settings(true); | |
| rtnl_unlock(); | |
| } | |
| static void cancel_crda_timeout(void) | |
| { | |
| cancel_delayed_work(&crda_timeout); | |
| } | |
| static void cancel_crda_timeout_sync(void) | |
| { | |
| cancel_delayed_work_sync(&crda_timeout); | |
| } | |
| static void reset_crda_timeouts(void) | |
| { | |
| reg_crda_timeouts = 0; | |
| } | |
| /* | |
| * This lets us keep regulatory code which is updated on a regulatory | |
| * basis in userspace. | |
| */ | |
| static int call_crda(const char *alpha2) | |
| { | |
| char country[12]; | |
| char *env[] = { country, NULL }; | |
| int ret; | |
| snprintf(country, sizeof(country), "COUNTRY=%c%c", | |
| alpha2[0], alpha2[1]); | |
| if (reg_crda_timeouts > REG_MAX_CRDA_TIMEOUTS) { | |
| pr_debug("Exceeded CRDA call max attempts. Not calling CRDA\n"); | |
| return -EINVAL; | |
| } | |
| if (!is_world_regdom((char *) alpha2)) | |
| pr_debug("Calling CRDA for country: %c%c\n", | |
| alpha2[0], alpha2[1]); | |
| else | |
| pr_debug("Calling CRDA to update world regulatory domain\n"); | |
| ret = kobject_uevent_env(®_pdev->dev.kobj, KOBJ_CHANGE, env); | |
| if (ret) | |
| return ret; | |
| queue_delayed_work(system_power_efficient_wq, | |
| &crda_timeout, msecs_to_jiffies(3142)); | |
| return 0; | |
| } | |
| #else | |
| static inline void cancel_crda_timeout(void) {} | |
| static inline void cancel_crda_timeout_sync(void) {} | |
| static inline void reset_crda_timeouts(void) {} | |
| static inline int call_crda(const char *alpha2) | |
| { | |
| return -ENODATA; | |
| } | |
| #endif /* CONFIG_CFG80211_CRDA_SUPPORT */ | |
| static bool reg_query_database(struct regulatory_request *request) | |
| { | |
| /* query internal regulatory database (if it exists) */ | |
| if (reg_query_builtin(request->alpha2) == 0) | |
| return true; | |
| if (call_crda(request->alpha2) == 0) | |
| return true; | |
| return false; | |
| } | |
| bool reg_is_valid_request(const char *alpha2) | |
| { | |
| struct regulatory_request *lr = get_last_request(); | |
| if (!lr || lr->processed) | |
| return false; | |
| return alpha2_equal(lr->alpha2, alpha2); | |
| } | |
| static const struct ieee80211_regdomain *reg_get_regdomain(struct wiphy *wiphy) | |
| { | |
| struct regulatory_request *lr = get_last_request(); | |
| /* | |
| * Follow the driver's regulatory domain, if present, unless a country | |
| * IE has been processed or a user wants to help complaince further | |
| */ | |
| if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && | |
| lr->initiator != NL80211_REGDOM_SET_BY_USER && | |
| wiphy->regd) | |
| return get_wiphy_regdom(wiphy); | |
| return get_cfg80211_regdom(); | |
| } | |
| static unsigned int | |
| reg_get_max_bandwidth_from_range(const struct ieee80211_regdomain *rd, | |
| const struct ieee80211_reg_rule *rule) | |
| { | |
| const struct ieee80211_freq_range *freq_range = &rule->freq_range; | |
| const struct ieee80211_freq_range *freq_range_tmp; | |
| const struct ieee80211_reg_rule *tmp; | |
| u32 start_freq, end_freq, idx, no; | |
| for (idx = 0; idx < rd->n_reg_rules; idx++) | |
| if (rule == &rd->reg_rules[idx]) | |
| break; | |
| if (idx == rd->n_reg_rules) | |
| return 0; | |
| /* get start_freq */ | |
| no = idx; | |
| while (no) { | |
| tmp = &rd->reg_rules[--no]; | |
| freq_range_tmp = &tmp->freq_range; | |
| if (freq_range_tmp->end_freq_khz < freq_range->start_freq_khz) | |
| break; | |
| freq_range = freq_range_tmp; | |
| } | |
| start_freq = freq_range->start_freq_khz; | |
| /* get end_freq */ | |
| freq_range = &rule->freq_range; | |
| no = idx; | |
| while (no < rd->n_reg_rules - 1) { | |
| tmp = &rd->reg_rules[++no]; | |
| freq_range_tmp = &tmp->freq_range; | |
| if (freq_range_tmp->start_freq_khz > freq_range->end_freq_khz) | |
| break; | |
| freq_range = freq_range_tmp; | |
| } | |
| end_freq = freq_range->end_freq_khz; | |
| return end_freq - start_freq; | |
| } | |
| unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd, | |
| const struct ieee80211_reg_rule *rule) | |
| { | |
| unsigned int bw = reg_get_max_bandwidth_from_range(rd, rule); | |
| if (rule->flags & NL80211_RRF_NO_160MHZ) | |
| bw = min_t(unsigned int, bw, MHZ_TO_KHZ(80)); | |
| if (rule->flags & NL80211_RRF_NO_80MHZ) | |
| bw = min_t(unsigned int, bw, MHZ_TO_KHZ(40)); | |
| /* | |
| * HT40+/HT40- limits are handled per-channel. Only limit BW if both | |
| * are not allowed. | |
| */ | |
| if (rule->flags & NL80211_RRF_NO_HT40MINUS && | |
| rule->flags & NL80211_RRF_NO_HT40PLUS) | |
| bw = min_t(unsigned int, bw, MHZ_TO_KHZ(20)); | |
| return bw; | |
| } | |
| /* Sanity check on a regulatory rule */ | |
| static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule) | |
| { | |
| const struct ieee80211_freq_range *freq_range = &rule->freq_range; | |
| u32 freq_diff; | |
| if (freq_range->start_freq_khz <= 0 || freq_range->end_freq_khz <= 0) | |
| return false; | |
| if (freq_range->start_freq_khz > freq_range->end_freq_khz) | |
| return false; | |
| freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; | |
| if (freq_range->end_freq_khz <= freq_range->start_freq_khz || | |
| freq_range->max_bandwidth_khz > freq_diff) | |
| return false; | |
| return true; | |
| } | |
| static bool is_valid_rd(const struct ieee80211_regdomain *rd) | |
| { | |
| const struct ieee80211_reg_rule *reg_rule = NULL; | |
| unsigned int i; | |
| if (!rd->n_reg_rules) | |
| return false; | |
| if (WARN_ON(rd->n_reg_rules > NL80211_MAX_SUPP_REG_RULES)) | |
| return false; | |
| for (i = 0; i < rd->n_reg_rules; i++) { | |
| reg_rule = &rd->reg_rules[i]; | |
| if (!is_valid_reg_rule(reg_rule)) | |
| return false; | |
| } | |
| return true; | |
| } | |
| /** | |
| * freq_in_rule_band - tells us if a frequency is in a frequency band | |
| * @freq_range: frequency rule we want to query | |
| * @freq_khz: frequency we are inquiring about | |
| * | |
| * This lets us know if a specific frequency rule is or is not relevant to | |
| * a specific frequency's band. Bands are device specific and artificial | |
| * definitions (the "2.4 GHz band", the "5 GHz band" and the "60GHz band"), | |
| * however it is safe for now to assume that a frequency rule should not be | |
| * part of a frequency's band if the start freq or end freq are off by more | |
| * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 20 GHz for the | |
| * 60 GHz band. | |
| * This resolution can be lowered and should be considered as we add | |
| * regulatory rule support for other "bands". | |
| **/ | |
| static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range, | |
| u32 freq_khz) | |
| { | |
| #define ONE_GHZ_IN_KHZ 1000000 | |
| /* | |
| * From 802.11ad: directional multi-gigabit (DMG): | |
| * Pertaining to operation in a frequency band containing a channel | |
| * with the Channel starting frequency above 45 GHz. | |
| */ | |
| u32 limit = freq_khz > 45 * ONE_GHZ_IN_KHZ ? | |
| 20 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ; | |
| if (abs(freq_khz - freq_range->start_freq_khz) <= limit) | |
| return true; | |
| if (abs(freq_khz - freq_range->end_freq_khz) <= limit) | |
| return true; | |
| return false; | |
| #undef ONE_GHZ_IN_KHZ | |
| } | |
| /* | |
| * Later on we can perhaps use the more restrictive DFS | |
| * region but we don't have information for that yet so | |
| * for now simply disallow conflicts. | |
| */ | |
| static enum nl80211_dfs_regions | |
| reg_intersect_dfs_region(const enum nl80211_dfs_regions dfs_region1, | |
| const enum nl80211_dfs_regions dfs_region2) | |
| { | |
| if (dfs_region1 != dfs_region2) | |
| return NL80211_DFS_UNSET; | |
| return dfs_region1; | |
| } | |
| /* | |
| * Helper for regdom_intersect(), this does the real | |
| * mathematical intersection fun | |
| */ | |
| static int reg_rules_intersect(const struct ieee80211_regdomain *rd1, | |
| const struct ieee80211_regdomain *rd2, | |
| const struct ieee80211_reg_rule *rule1, | |
| const struct ieee80211_reg_rule *rule2, | |
| struct ieee80211_reg_rule *intersected_rule) | |
| { | |
| const struct ieee80211_freq_range *freq_range1, *freq_range2; | |
| struct ieee80211_freq_range *freq_range; | |
| const struct ieee80211_power_rule *power_rule1, *power_rule2; | |
| struct ieee80211_power_rule *power_rule; | |
| u32 freq_diff, max_bandwidth1, max_bandwidth2; | |
| freq_range1 = &rule1->freq_range; | |
| freq_range2 = &rule2->freq_range; | |
| freq_range = &intersected_rule->freq_range; | |
| power_rule1 = &rule1->power_rule; | |
| power_rule2 = &rule2->power_rule; | |
| power_rule = &intersected_rule->power_rule; | |
| freq_range->start_freq_khz = max(freq_range1->start_freq_khz, | |
| freq_range2->start_freq_khz); | |
| freq_range->end_freq_khz = min(freq_range1->end_freq_khz, | |
| freq_range2->end_freq_khz); | |
| max_bandwidth1 = freq_range1->max_bandwidth_khz; | |
| max_bandwidth2 = freq_range2->max_bandwidth_khz; | |
| if (rule1->flags & NL80211_RRF_AUTO_BW) | |
| max_bandwidth1 = reg_get_max_bandwidth(rd1, rule1); | |
| if (rule2->flags & NL80211_RRF_AUTO_BW) | |
| max_bandwidth2 = reg_get_max_bandwidth(rd2, rule2); | |
| freq_range->max_bandwidth_khz = min(max_bandwidth1, max_bandwidth2); | |
| intersected_rule->flags = rule1->flags | rule2->flags; | |
| /* | |
| * In case NL80211_RRF_AUTO_BW requested for both rules | |
| * set AUTO_BW in intersected rule also. Next we will | |
| * calculate BW correctly in handle_channel function. | |
| * In other case remove AUTO_BW flag while we calculate | |
| * maximum bandwidth correctly and auto calculation is | |
| * not required. | |
| */ | |
| if ((rule1->flags & NL80211_RRF_AUTO_BW) && | |
| (rule2->flags & NL80211_RRF_AUTO_BW)) | |
| intersected_rule->flags |= NL80211_RRF_AUTO_BW; | |
| else | |
| intersected_rule->flags &= ~NL80211_RRF_AUTO_BW; | |
| freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; | |
| if (freq_range->max_bandwidth_khz > freq_diff) | |
| freq_range->max_bandwidth_khz = freq_diff; | |
| power_rule->max_eirp = min(power_rule1->max_eirp, | |
| power_rule2->max_eirp); | |
| power_rule->max_antenna_gain = min(power_rule1->max_antenna_gain, | |
| power_rule2->max_antenna_gain); | |
| intersected_rule->dfs_cac_ms = max(rule1->dfs_cac_ms, | |
| rule2->dfs_cac_ms); | |
| if (!is_valid_reg_rule(intersected_rule)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| /* check whether old rule contains new rule */ | |
| static bool rule_contains(struct ieee80211_reg_rule *r1, | |
| struct ieee80211_reg_rule *r2) | |
| { | |
| /* for simplicity, currently consider only same flags */ | |
| if (r1->flags != r2->flags) | |
| return false; | |
| /* verify r1 is more restrictive */ | |
| if ((r1->power_rule.max_antenna_gain > | |
| r2->power_rule.max_antenna_gain) || | |
| r1->power_rule.max_eirp > r2->power_rule.max_eirp) | |
| return false; | |
| /* make sure r2's range is contained within r1 */ | |
| if (r1->freq_range.start_freq_khz > r2->freq_range.start_freq_khz || | |
| r1->freq_range.end_freq_khz < r2->freq_range.end_freq_khz) | |
| return false; | |
| /* and finally verify that r1.max_bw >= r2.max_bw */ | |
| if (r1->freq_range.max_bandwidth_khz < | |
| r2->freq_range.max_bandwidth_khz) | |
| return false; | |
| return true; | |
| } | |
| /* add or extend current rules. do nothing if rule is already contained */ | |
| static void add_rule(struct ieee80211_reg_rule *rule, | |
| struct ieee80211_reg_rule *reg_rules, u32 *n_rules) | |
| { | |
| struct ieee80211_reg_rule *tmp_rule; | |
| int i; | |
| for (i = 0; i < *n_rules; i++) { | |
| tmp_rule = ®_rules[i]; | |
| /* rule is already contained - do nothing */ | |
| if (rule_contains(tmp_rule, rule)) | |
| return; | |
| /* extend rule if possible */ | |
| if (rule_contains(rule, tmp_rule)) { | |
| memcpy(tmp_rule, rule, sizeof(*rule)); | |
| return; | |
| } | |
| } | |
| memcpy(®_rules[*n_rules], rule, sizeof(*rule)); | |
| (*n_rules)++; | |
| } | |
| /** | |
| * regdom_intersect - do the intersection between two regulatory domains | |
| * @rd1: first regulatory domain | |
| * @rd2: second regulatory domain | |
| * | |
| * Use this function to get the intersection between two regulatory domains. | |
| * Once completed we will mark the alpha2 for the rd as intersected, "98", | |
| * as no one single alpha2 can represent this regulatory domain. | |
| * | |
| * Returns a pointer to the regulatory domain structure which will hold the | |
| * resulting intersection of rules between rd1 and rd2. We will | |
| * kzalloc() this structure for you. | |
| */ | |
| static struct ieee80211_regdomain * | |
| regdom_intersect(const struct ieee80211_regdomain *rd1, | |
| const struct ieee80211_regdomain *rd2) | |
| { | |
| int r, size_of_regd; | |
| unsigned int x, y; | |
| unsigned int num_rules = 0; | |
| const struct ieee80211_reg_rule *rule1, *rule2; | |
| struct ieee80211_reg_rule intersected_rule; | |
| struct ieee80211_regdomain *rd; | |
| if (!rd1 || !rd2) | |
| return NULL; | |
| /* | |
| * First we get a count of the rules we'll need, then we actually | |
| * build them. This is to so we can malloc() and free() a | |
| * regdomain once. The reason we use reg_rules_intersect() here | |
| * is it will return -EINVAL if the rule computed makes no sense. | |
| * All rules that do check out OK are valid. | |
| */ | |
| for (x = 0; x < rd1->n_reg_rules; x++) { | |
| rule1 = &rd1->reg_rules[x]; | |
| for (y = 0; y < rd2->n_reg_rules; y++) { | |
| rule2 = &rd2->reg_rules[y]; | |
| if (!reg_rules_intersect(rd1, rd2, rule1, rule2, | |
| &intersected_rule)) | |
| num_rules++; | |
| } | |
| } | |
| if (!num_rules) | |
| return NULL; | |
| size_of_regd = sizeof(struct ieee80211_regdomain) + | |
| num_rules * sizeof(struct ieee80211_reg_rule); | |
| rd = kzalloc(size_of_regd, GFP_KERNEL); | |
| if (!rd) | |
| return NULL; | |
| for (x = 0; x < rd1->n_reg_rules; x++) { | |
| rule1 = &rd1->reg_rules[x]; | |
| for (y = 0; y < rd2->n_reg_rules; y++) { | |
| rule2 = &rd2->reg_rules[y]; | |
| r = reg_rules_intersect(rd1, rd2, rule1, rule2, | |
| &intersected_rule); | |
| /* | |
| * No need to memset here the intersected rule here as | |
| * we're not using the stack anymore | |
| */ | |
| if (r) | |
| continue; | |
| add_rule(&intersected_rule, rd->reg_rules, | |
| &rd->n_reg_rules); | |
| } | |
| } | |
| rd->alpha2[0] = '9'; | |
| rd->alpha2[1] = '8'; | |
| rd->dfs_region = reg_intersect_dfs_region(rd1->dfs_region, | |
| rd2->dfs_region); | |
| return rd; | |
| } | |
| /* | |
| * XXX: add support for the rest of enum nl80211_reg_rule_flags, we may | |
| * want to just have the channel structure use these | |
| */ | |
| static u32 map_regdom_flags(u32 rd_flags) | |
| { | |
| u32 channel_flags = 0; | |
| if (rd_flags & NL80211_RRF_NO_IR_ALL) | |
| channel_flags |= IEEE80211_CHAN_NO_IR; | |
| if (rd_flags & NL80211_RRF_DFS) | |
| channel_flags |= IEEE80211_CHAN_RADAR; | |
| if (rd_flags & NL80211_RRF_NO_OFDM) | |
| channel_flags |= IEEE80211_CHAN_NO_OFDM; | |
| if (rd_flags & NL80211_RRF_NO_OUTDOOR) | |
| channel_flags |= IEEE80211_CHAN_INDOOR_ONLY; | |
| if (rd_flags & NL80211_RRF_IR_CONCURRENT) | |
| channel_flags |= IEEE80211_CHAN_IR_CONCURRENT; | |
| if (rd_flags & NL80211_RRF_NO_HT40MINUS) | |
| channel_flags |= IEEE80211_CHAN_NO_HT40MINUS; | |
| if (rd_flags & NL80211_RRF_NO_HT40PLUS) | |
| channel_flags |= IEEE80211_CHAN_NO_HT40PLUS; | |
| if (rd_flags & NL80211_RRF_NO_80MHZ) | |
| channel_flags |= IEEE80211_CHAN_NO_80MHZ; | |
| if (rd_flags & NL80211_RRF_NO_160MHZ) | |
| channel_flags |= IEEE80211_CHAN_NO_160MHZ; | |
| return channel_flags; | |
| } | |
| static const struct ieee80211_reg_rule * | |
| freq_reg_info_regd(u32 center_freq, | |
| const struct ieee80211_regdomain *regd, u32 bw) | |
| { | |
| int i; | |
| bool band_rule_found = false; | |
| bool bw_fits = false; | |
| if (!regd) | |
| return ERR_PTR(-EINVAL); | |
| for (i = 0; i < regd->n_reg_rules; i++) { | |
| const struct ieee80211_reg_rule *rr; | |
| const struct ieee80211_freq_range *fr = NULL; | |
| rr = ®d->reg_rules[i]; | |
| fr = &rr->freq_range; | |
| /* | |
| * We only need to know if one frequency rule was | |
| * was in center_freq's band, that's enough, so lets | |
| * not overwrite it once found | |
| */ | |
| if (!band_rule_found) | |
| band_rule_found = freq_in_rule_band(fr, center_freq); | |
| bw_fits = cfg80211_does_bw_fit_range(fr, center_freq, bw); | |
| if (band_rule_found && bw_fits) | |
| return rr; | |
| } | |
| if (!band_rule_found) | |
| return ERR_PTR(-ERANGE); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| static const struct ieee80211_reg_rule * | |
| __freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 min_bw) | |
| { | |
| const struct ieee80211_regdomain *regd = reg_get_regdomain(wiphy); | |
| const struct ieee80211_reg_rule *reg_rule = NULL; | |
| u32 bw; | |
| for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) { | |
| reg_rule = freq_reg_info_regd(center_freq, regd, bw); | |
| if (!IS_ERR(reg_rule)) | |
| return reg_rule; | |
| } | |
| return reg_rule; | |
| } | |
| const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, | |
| u32 center_freq) | |
| { | |
| return __freq_reg_info(wiphy, center_freq, MHZ_TO_KHZ(20)); | |
| } | |
| EXPORT_SYMBOL(freq_reg_info); | |
| const char *reg_initiator_name(enum nl80211_reg_initiator initiator) | |
| { | |
| switch (initiator) { | |
| case NL80211_REGDOM_SET_BY_CORE: | |
| return "core"; | |
| case NL80211_REGDOM_SET_BY_USER: | |
| return "user"; | |
| case NL80211_REGDOM_SET_BY_DRIVER: | |
| return "driver"; | |
| case NL80211_REGDOM_SET_BY_COUNTRY_IE: | |
| return "country IE"; | |
| default: | |
| WARN_ON(1); | |
| return "bug"; | |
| } | |
| } | |
| EXPORT_SYMBOL(reg_initiator_name); | |
| static uint32_t reg_rule_to_chan_bw_flags(const struct ieee80211_regdomain *regd, | |
| const struct ieee80211_reg_rule *reg_rule, | |
| const struct ieee80211_channel *chan) | |
| { | |
| const struct ieee80211_freq_range *freq_range = NULL; | |
| u32 max_bandwidth_khz, bw_flags = 0; | |
| freq_range = ®_rule->freq_range; | |
| max_bandwidth_khz = freq_range->max_bandwidth_khz; | |
| /* Check if auto calculation requested */ | |
| if (reg_rule->flags & NL80211_RRF_AUTO_BW) | |
| max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule); | |
| /* If we get a reg_rule we can assume that at least 5Mhz fit */ | |
| if (!cfg80211_does_bw_fit_range(freq_range, | |
| MHZ_TO_KHZ(chan->center_freq), | |
| MHZ_TO_KHZ(10))) | |
| bw_flags |= IEEE80211_CHAN_NO_10MHZ; | |
| if (!cfg80211_does_bw_fit_range(freq_range, | |
| MHZ_TO_KHZ(chan->center_freq), | |
| MHZ_TO_KHZ(20))) | |
| bw_flags |= IEEE80211_CHAN_NO_20MHZ; | |
| if (max_bandwidth_khz < MHZ_TO_KHZ(10)) | |
| bw_flags |= IEEE80211_CHAN_NO_10MHZ; | |
| if (max_bandwidth_khz < MHZ_TO_KHZ(20)) | |
| bw_flags |= IEEE80211_CHAN_NO_20MHZ; | |
| if (max_bandwidth_khz < MHZ_TO_KHZ(40)) | |
| bw_flags |= IEEE80211_CHAN_NO_HT40; | |
| if (max_bandwidth_khz < MHZ_TO_KHZ(80)) | |
| bw_flags |= IEEE80211_CHAN_NO_80MHZ; | |
| if (max_bandwidth_khz < MHZ_TO_KHZ(160)) | |
| bw_flags |= IEEE80211_CHAN_NO_160MHZ; | |
| return bw_flags; | |
| } | |
| /* | |
| * Note that right now we assume the desired channel bandwidth | |
| * is always 20 MHz for each individual channel (HT40 uses 20 MHz | |
| * per channel, the primary and the extension channel). | |
| */ | |
| static void handle_channel(struct wiphy *wiphy, | |
| enum nl80211_reg_initiator initiator, | |
| struct ieee80211_channel *chan) | |
| { | |
| u32 flags, bw_flags = 0; | |
| const struct ieee80211_reg_rule *reg_rule = NULL; | |
| const struct ieee80211_power_rule *power_rule = NULL; | |
| struct wiphy *request_wiphy = NULL; | |
| struct regulatory_request *lr = get_last_request(); | |
| const struct ieee80211_regdomain *regd; | |
| request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); | |
| flags = chan->orig_flags; | |
| reg_rule = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq)); | |
| if (IS_ERR(reg_rule)) { | |
| /* | |
| * We will disable all channels that do not match our | |
| * received regulatory rule unless the hint is coming | |
| * from a Country IE and the Country IE had no information | |
| * about a band. The IEEE 802.11 spec allows for an AP | |
| * to send only a subset of the regulatory rules allowed, | |
| * so an AP in the US that only supports 2.4 GHz may only send | |
| * a country IE with information for the 2.4 GHz band | |
| * while 5 GHz is still supported. | |
| */ | |
| if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && | |
| PTR_ERR(reg_rule) == -ERANGE) | |
| return; | |
| if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && | |
| request_wiphy && request_wiphy == wiphy && | |
| request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) { | |
| pr_debug("Disabling freq %d MHz for good\n", | |
| chan->center_freq); | |
| chan->orig_flags |= IEEE80211_CHAN_DISABLED; | |
| chan->flags = chan->orig_flags; | |
| } else { | |
| pr_debug("Disabling freq %d MHz\n", | |
| chan->center_freq); | |
| chan->flags |= IEEE80211_CHAN_DISABLED; | |
| } | |
| return; | |
| } | |
| regd = reg_get_regdomain(wiphy); | |
| power_rule = ®_rule->power_rule; | |
| bw_flags = reg_rule_to_chan_bw_flags(regd, reg_rule, chan); | |
| if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && | |
| request_wiphy && request_wiphy == wiphy && | |
| request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) { | |
| /* | |
| * This guarantees the driver's requested regulatory domain | |
| * will always be used as a base for further regulatory | |
| * settings | |
| */ | |
| chan->flags = chan->orig_flags = | |
| map_regdom_flags(reg_rule->flags) | bw_flags; | |
| chan->max_antenna_gain = chan->orig_mag = | |
| (int) MBI_TO_DBI(power_rule->max_antenna_gain); | |
| chan->max_reg_power = chan->max_power = chan->orig_mpwr = | |
| (int) MBM_TO_DBM(power_rule->max_eirp); | |
| if (chan->flags & IEEE80211_CHAN_RADAR) { | |
| chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS; | |
| if (reg_rule->dfs_cac_ms) | |
| chan->dfs_cac_ms = reg_rule->dfs_cac_ms; | |
| } | |
| return; | |
| } | |
| chan->dfs_state = NL80211_DFS_USABLE; | |
| chan->dfs_state_entered = jiffies; | |
| chan->beacon_found = false; | |
| chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags); | |
| chan->max_antenna_gain = | |
| min_t(int, chan->orig_mag, | |
| MBI_TO_DBI(power_rule->max_antenna_gain)); | |
| chan->max_reg_power = (int) MBM_TO_DBM(power_rule->max_eirp); | |
| if (chan->flags & IEEE80211_CHAN_RADAR) { | |
| if (reg_rule->dfs_cac_ms) | |
| chan->dfs_cac_ms = reg_rule->dfs_cac_ms; | |
| else | |
| chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS; | |
| } | |
| if (chan->orig_mpwr) { | |
| /* | |
| * Devices that use REGULATORY_COUNTRY_IE_FOLLOW_POWER | |
| * will always follow the passed country IE power settings. | |
| */ | |
| if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && | |
| wiphy->regulatory_flags & REGULATORY_COUNTRY_IE_FOLLOW_POWER) | |
| chan->max_power = chan->max_reg_power; | |
| else | |
| chan->max_power = min(chan->orig_mpwr, | |
| chan->max_reg_power); | |
| } else | |
| chan->max_power = chan->max_reg_power; | |
| } | |
| static void handle_band(struct wiphy *wiphy, | |
| enum nl80211_reg_initiator initiator, | |
| struct ieee80211_supported_band *sband) | |
| { | |
| unsigned int i; | |
| if (!sband) | |
| return; | |
| for (i = 0; i < sband->n_channels; i++) | |
| handle_channel(wiphy, initiator, &sband->channels[i]); | |
| } | |
| static bool reg_request_cell_base(struct regulatory_request *request) | |
| { | |
| if (request->initiator != NL80211_REGDOM_SET_BY_USER) | |
| return false; | |
| return request->user_reg_hint_type == NL80211_USER_REG_HINT_CELL_BASE; | |
| } | |
| bool reg_last_request_cell_base(void) | |
| { | |
| return reg_request_cell_base(get_last_request()); | |
| } | |
| #ifdef CONFIG_CFG80211_REG_CELLULAR_HINTS | |
| /* Core specific check */ | |
| static enum reg_request_treatment | |
| reg_ignore_cell_hint(struct regulatory_request *pending_request) | |
| { | |
| struct regulatory_request *lr = get_last_request(); | |
| if (!reg_num_devs_support_basehint) | |
| return REG_REQ_IGNORE; | |
| if (reg_request_cell_base(lr) && | |
| !regdom_changes(pending_request->alpha2)) | |
| return REG_REQ_ALREADY_SET; | |
| return REG_REQ_OK; | |
| } | |
| /* Device specific check */ | |
| static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) | |
| { | |
| return !(wiphy->features & NL80211_FEATURE_CELL_BASE_REG_HINTS); | |
| } | |
| #else | |
| static enum reg_request_treatment | |
| reg_ignore_cell_hint(struct regulatory_request *pending_request) | |
| { | |
| return REG_REQ_IGNORE; | |
| } | |
| static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) | |
| { | |
| return true; | |
| } | |
| #endif | |
| static bool wiphy_strict_alpha2_regd(struct wiphy *wiphy) | |
| { | |
| if (wiphy->regulatory_flags & REGULATORY_STRICT_REG && | |
| !(wiphy->regulatory_flags & REGULATORY_CUSTOM_REG)) | |
| return true; | |
| return false; | |
| } | |
| static bool ignore_reg_update(struct wiphy *wiphy, | |
| enum nl80211_reg_initiator initiator) | |
| { | |
| struct regulatory_request *lr = get_last_request(); | |
| if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) | |
| return true; | |
| if (!lr) { | |
| pr_debug("Ignoring regulatory request set by %s since last_request is not set\n", | |
| reg_initiator_name(initiator)); | |
| return true; | |
| } | |
| if (initiator == NL80211_REGDOM_SET_BY_CORE && | |
| wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) { | |
| pr_debug("Ignoring regulatory request set by %s since the driver uses its own custom regulatory domain\n", | |
| reg_initiator_name(initiator)); | |
| return true; | |
| } | |
| /* | |
| * wiphy->regd will be set once the device has its own | |
| * desired regulatory domain set | |
| */ | |
| if (wiphy_strict_alpha2_regd(wiphy) && !wiphy->regd && | |
| initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && | |
| !is_world_regdom(lr->alpha2)) { | |
| pr_debug("Ignoring regulatory request set by %s since the driver requires its own regulatory domain to be set first\n", | |
| reg_initiator_name(initiator)); | |
| return true; | |
| } | |
| if (reg_request_cell_base(lr)) | |
| return reg_dev_ignore_cell_hint(wiphy); | |
| return false; | |
| } | |
| static bool reg_is_world_roaming(struct wiphy *wiphy) | |
| { | |
| const struct ieee80211_regdomain *cr = get_cfg80211_regdom(); | |
| const struct ieee80211_regdomain *wr = get_wiphy_regdom(wiphy); | |
| struct regulatory_request *lr = get_last_request(); | |
| if (is_world_regdom(cr->alpha2) || (wr && is_world_regdom(wr->alpha2))) | |
| return true; | |
| if (lr && lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && | |
| wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) | |
| return true; | |
| return false; | |
| } | |
| static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx, | |
| struct reg_beacon *reg_beacon) | |
| { | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_channel *chan; | |
| bool channel_changed = false; | |
| struct ieee80211_channel chan_before; | |
| sband = wiphy->bands[reg_beacon->chan.band]; | |
| chan = &sband->channels[chan_idx]; | |
| if (likely(chan->center_freq != reg_beacon->chan.center_freq)) | |
| return; | |
| if (chan->beacon_found) | |
| return; | |
| chan->beacon_found = true; | |
| if (!reg_is_world_roaming(wiphy)) | |
| return; | |
| if (wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS) | |
| return; | |
| chan_before.center_freq = chan->center_freq; | |
| chan_before.flags = chan->flags; | |
| if (chan->flags & IEEE80211_CHAN_NO_IR) { | |
| chan->flags &= ~IEEE80211_CHAN_NO_IR; | |
| channel_changed = true; | |
| } | |
| if (channel_changed) | |
| nl80211_send_beacon_hint_event(wiphy, &chan_before, chan); | |
| } | |
| /* | |
| * Called when a scan on a wiphy finds a beacon on | |
| * new channel | |
| */ | |
| static void wiphy_update_new_beacon(struct wiphy *wiphy, | |
| struct reg_beacon *reg_beacon) | |
| { | |
| unsigned int i; | |
| struct ieee80211_supported_band *sband; | |
| if (!wiphy->bands[reg_beacon->chan.band]) | |
| return; | |
| sband = wiphy->bands[reg_beacon->chan.band]; | |
| for (i = 0; i < sband->n_channels; i++) | |
| handle_reg_beacon(wiphy, i, reg_beacon); | |
| } | |
| /* | |
| * Called upon reg changes or a new wiphy is added | |
| */ | |
| static void wiphy_update_beacon_reg(struct wiphy *wiphy) | |
| { | |
| unsigned int i; | |
| struct ieee80211_supported_band *sband; | |
| struct reg_beacon *reg_beacon; | |
| list_for_each_entry(reg_beacon, ®_beacon_list, list) { | |
| if (!wiphy->bands[reg_beacon->chan.band]) | |
| continue; | |
| sband = wiphy->bands[reg_beacon->chan.band]; | |
| for (i = 0; i < sband->n_channels; i++) | |
| handle_reg_beacon(wiphy, i, reg_beacon); | |
| } | |
| } | |
| /* Reap the advantages of previously found beacons */ | |
| static void reg_process_beacons(struct wiphy *wiphy) | |
| { | |
| /* | |
| * Means we are just firing up cfg80211, so no beacons would | |
| * have been processed yet. | |
| */ | |
| if (!last_request) | |
| return; | |
| wiphy_update_beacon_reg(wiphy); | |
| } | |
| static bool is_ht40_allowed(struct ieee80211_channel *chan) | |
| { | |
| if (!chan) | |
| return false; | |
| if (chan->flags & IEEE80211_CHAN_DISABLED) | |
| return false; | |
| /* This would happen when regulatory rules disallow HT40 completely */ | |
| if ((chan->flags & IEEE80211_CHAN_NO_HT40) == IEEE80211_CHAN_NO_HT40) | |
| return false; | |
| return true; | |
| } | |
| static void reg_process_ht_flags_channel(struct wiphy *wiphy, | |
| struct ieee80211_channel *channel) | |
| { | |
| struct ieee80211_supported_band *sband = wiphy->bands[channel->band]; | |
| struct ieee80211_channel *channel_before = NULL, *channel_after = NULL; | |
| const struct ieee80211_regdomain *regd; | |
| unsigned int i; | |
| u32 flags; | |
| if (!is_ht40_allowed(channel)) { | |
| channel->flags |= IEEE80211_CHAN_NO_HT40; | |
| return; | |
| } | |
| /* | |
| * We need to ensure the extension channels exist to | |
| * be able to use HT40- or HT40+, this finds them (or not) | |
| */ | |
| for (i = 0; i < sband->n_channels; i++) { | |
| struct ieee80211_channel *c = &sband->channels[i]; | |
| if (c->center_freq == (channel->center_freq - 20)) | |
| channel_before = c; | |
| if (c->center_freq == (channel->center_freq + 20)) | |
| channel_after = c; | |
| } | |
| flags = 0; | |
| regd = get_wiphy_regdom(wiphy); | |
| if (regd) { | |
| const struct ieee80211_reg_rule *reg_rule = | |
| freq_reg_info_regd(MHZ_TO_KHZ(channel->center_freq), | |
| regd, MHZ_TO_KHZ(20)); | |
| if (!IS_ERR(reg_rule)) | |
| flags = reg_rule->flags; | |
| } | |
| /* | |
| * Please note that this assumes target bandwidth is 20 MHz, | |
| * if that ever changes we also need to change the below logic | |
| * to include that as well. | |
| */ | |
| if (!is_ht40_allowed(channel_before) || | |
| flags & NL80211_RRF_NO_HT40MINUS) | |
| channel->flags |= IEEE80211_CHAN_NO_HT40MINUS; | |
| else | |
| channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS; | |
| if (!is_ht40_allowed(channel_after) || | |
| flags & NL80211_RRF_NO_HT40PLUS) | |
| channel->flags |= IEEE80211_CHAN_NO_HT40PLUS; | |
| else | |
| channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS; | |
| } | |
| static void reg_process_ht_flags_band(struct wiphy *wiphy, | |
| struct ieee80211_supported_band *sband) | |
| { | |
| unsigned int i; | |
| if (!sband) | |
| return; | |
| for (i = 0; i < sband->n_channels; i++) | |
| reg_process_ht_flags_channel(wiphy, &sband->channels[i]); | |
| } | |
| static void reg_process_ht_flags(struct wiphy *wiphy) | |
| { | |
| enum nl80211_band band; | |
| if (!wiphy) | |
| return; | |
| for (band = 0; band < NUM_NL80211_BANDS; band++) | |
| reg_process_ht_flags_band(wiphy, wiphy->bands[band]); | |
| } | |
| static void reg_call_notifier(struct wiphy *wiphy, | |
| struct regulatory_request *request) | |
| { | |
| if (wiphy->reg_notifier) | |
| wiphy->reg_notifier(wiphy, request); | |
| } | |
| static bool reg_wdev_chan_valid(struct wiphy *wiphy, struct wireless_dev *wdev) | |
| { | |
| struct cfg80211_chan_def chandef; | |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | |
| enum nl80211_iftype iftype; | |
| wdev_lock(wdev); | |
| iftype = wdev->iftype; | |
| /* make sure the interface is active */ | |
| if (!wdev->netdev || !netif_running(wdev->netdev)) | |
| goto wdev_inactive_unlock; | |
| switch (iftype) { | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_P2P_GO: | |
| if (!wdev->beacon_interval) | |
| goto wdev_inactive_unlock; | |
| chandef = wdev->chandef; | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| if (!wdev->ssid_len) | |
| goto wdev_inactive_unlock; | |
| chandef = wdev->chandef; | |
| break; | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| if (!wdev->current_bss || | |
| !wdev->current_bss->pub.channel) | |
| goto wdev_inactive_unlock; | |
| if (!rdev->ops->get_channel || | |
| rdev_get_channel(rdev, wdev, &chandef)) | |
| cfg80211_chandef_create(&chandef, | |
| wdev->current_bss->pub.channel, | |
| NL80211_CHAN_NO_HT); | |
| break; | |
| case NL80211_IFTYPE_MONITOR: | |
| case NL80211_IFTYPE_AP_VLAN: | |
| case NL80211_IFTYPE_P2P_DEVICE: | |
| /* no enforcement required */ | |
| break; | |
| default: | |
| /* others not implemented for now */ | |
| WARN_ON(1); | |
| break; | |
| } | |
| wdev_unlock(wdev); | |
| switch (iftype) { | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_P2P_GO: | |
| case NL80211_IFTYPE_ADHOC: | |
| return cfg80211_reg_can_beacon_relax(wiphy, &chandef, iftype); | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| return cfg80211_chandef_usable(wiphy, &chandef, | |
| IEEE80211_CHAN_DISABLED); | |
| default: | |
| break; | |
| } | |
| return true; | |
| wdev_inactive_unlock: | |
| wdev_unlock(wdev); | |
| return true; | |
| } | |
| static void reg_leave_invalid_chans(struct wiphy *wiphy) | |
| { | |
| struct wireless_dev *wdev; | |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | |
| ASSERT_RTNL(); | |
| list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) | |
| if (!reg_wdev_chan_valid(wiphy, wdev)) | |
| cfg80211_leave(rdev, wdev); | |
| } | |
| static void reg_check_chans_work(struct work_struct *work) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| pr_debug("Verifying active interfaces after reg change\n"); | |
| rtnl_lock(); | |
| list_for_each_entry(rdev, &cfg80211_rdev_list, list) | |
| if (!(rdev->wiphy.regulatory_flags & | |
| REGULATORY_IGNORE_STALE_KICKOFF)) | |
| reg_leave_invalid_chans(&rdev->wiphy); | |
| rtnl_unlock(); | |
| } | |
| static void reg_check_channels(void) | |
| { | |
| /* | |
| * Give usermode a chance to do something nicer (move to another | |
| * channel, orderly disconnection), before forcing a disconnection. | |
| */ | |
| mod_delayed_work(system_power_efficient_wq, | |
| ®_check_chans, | |
| msecs_to_jiffies(REG_ENFORCE_GRACE_MS)); | |
| } | |
| static void wiphy_update_regulatory(struct wiphy *wiphy, | |
| enum nl80211_reg_initiator initiator) | |
| { | |
| enum nl80211_band band; | |
| struct regulatory_request *lr = get_last_request(); | |
| if (ignore_reg_update(wiphy, initiator)) { | |
| /* | |
| * Regulatory updates set by CORE are ignored for custom | |
| * regulatory cards. Let us notify the changes to the driver, | |
| * as some drivers used this to restore its orig_* reg domain. | |
| */ | |
| if (initiator == NL80211_REGDOM_SET_BY_CORE && | |
| wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) | |
| reg_call_notifier(wiphy, lr); | |
| return; | |
| } | |
| lr->dfs_region = get_cfg80211_regdom()->dfs_region; | |
| for (band = 0; band < NUM_NL80211_BANDS; band++) | |
| handle_band(wiphy, initiator, wiphy->bands[band]); | |
| reg_process_beacons(wiphy); | |
| reg_process_ht_flags(wiphy); | |
| reg_call_notifier(wiphy, lr); | |
| } | |
| static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| struct wiphy *wiphy; | |
| ASSERT_RTNL(); | |
| list_for_each_entry(rdev, &cfg80211_rdev_list, list) { | |
| wiphy = &rdev->wiphy; | |
| wiphy_update_regulatory(wiphy, initiator); | |
| } | |
| reg_check_channels(); | |
| } | |
| static void handle_channel_custom(struct wiphy *wiphy, | |
| struct ieee80211_channel *chan, | |
| const struct ieee80211_regdomain *regd) | |
| { | |
| u32 bw_flags = 0; | |
| const struct ieee80211_reg_rule *reg_rule = NULL; | |
| const struct ieee80211_power_rule *power_rule = NULL; | |
| u32 bw; | |
| for (bw = MHZ_TO_KHZ(20); bw >= MHZ_TO_KHZ(5); bw = bw / 2) { | |
| reg_rule = freq_reg_info_regd(MHZ_TO_KHZ(chan->center_freq), | |
| regd, bw); | |
| if (!IS_ERR(reg_rule)) | |
| break; | |
| } | |
| if (IS_ERR(reg_rule)) { | |
| pr_debug("Disabling freq %d MHz as custom regd has no rule that fits it\n", | |
| chan->center_freq); | |
| if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) { | |
| chan->flags |= IEEE80211_CHAN_DISABLED; | |
| } else { | |
| chan->orig_flags |= IEEE80211_CHAN_DISABLED; | |
| chan->flags = chan->orig_flags; | |
| } | |
| return; | |
| } | |
| power_rule = ®_rule->power_rule; | |
| bw_flags = reg_rule_to_chan_bw_flags(regd, reg_rule, chan); | |
| chan->dfs_state_entered = jiffies; | |
| chan->dfs_state = NL80211_DFS_USABLE; | |
| chan->beacon_found = false; | |
| if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) | |
| chan->flags = chan->orig_flags | bw_flags | | |
| map_regdom_flags(reg_rule->flags); | |
| else | |
| chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags; | |
| chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain); | |
| chan->max_reg_power = chan->max_power = | |
| (int) MBM_TO_DBM(power_rule->max_eirp); | |
| if (chan->flags & IEEE80211_CHAN_RADAR) { | |
| if (reg_rule->dfs_cac_ms) | |
| chan->dfs_cac_ms = reg_rule->dfs_cac_ms; | |
| else | |
| chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS; | |
| } | |
| chan->max_power = chan->max_reg_power; | |
| } | |
| static void handle_band_custom(struct wiphy *wiphy, | |
| struct ieee80211_supported_band *sband, | |
| const struct ieee80211_regdomain *regd) | |
| { | |
| unsigned int i; | |
| if (!sband) | |
| return; | |
| for (i = 0; i < sband->n_channels; i++) | |
| handle_channel_custom(wiphy, &sband->channels[i], regd); | |
| } | |
| /* Used by drivers prior to wiphy registration */ | |
| void wiphy_apply_custom_regulatory(struct wiphy *wiphy, | |
| const struct ieee80211_regdomain *regd) | |
| { | |
| enum nl80211_band band; | |
| unsigned int bands_set = 0; | |
| WARN(!(wiphy->regulatory_flags & REGULATORY_CUSTOM_REG), | |
| "wiphy should have REGULATORY_CUSTOM_REG\n"); | |
| wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG; | |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { | |
| if (!wiphy->bands[band]) | |
| continue; | |
| handle_band_custom(wiphy, wiphy->bands[band], regd); | |
| bands_set++; | |
| } | |
| /* | |
| * no point in calling this if it won't have any effect | |
| * on your device's supported bands. | |
| */ | |
| WARN_ON(!bands_set); | |
| } | |
| EXPORT_SYMBOL(wiphy_apply_custom_regulatory); | |
| static void reg_set_request_processed(void) | |
| { | |
| bool need_more_processing = false; | |
| struct regulatory_request *lr = get_last_request(); | |
| lr->processed = true; | |
| spin_lock(®_requests_lock); | |
| if (!list_empty(®_requests_list)) | |
| need_more_processing = true; | |
| spin_unlock(®_requests_lock); | |
| cancel_crda_timeout(); | |
| if (need_more_processing) | |
| schedule_work(®_work); | |
| } | |
| /** | |
| * reg_process_hint_core - process core regulatory requests | |
| * @pending_request: a pending core regulatory request | |
| * | |
| * The wireless subsystem can use this function to process | |
| * a regulatory request issued by the regulatory core. | |
| */ | |
| static enum reg_request_treatment | |
| reg_process_hint_core(struct regulatory_request *core_request) | |
| { | |
| if (reg_query_database(core_request)) { | |
| core_request->intersect = false; | |
| core_request->processed = false; | |
| reg_update_last_request(core_request); | |
| return REG_REQ_OK; | |
| } | |
| return REG_REQ_IGNORE; | |
| } | |
| static enum reg_request_treatment | |
| __reg_process_hint_user(struct regulatory_request *user_request) | |
| { | |
| struct regulatory_request *lr = get_last_request(); | |
| if (reg_request_cell_base(user_request)) | |
| return reg_ignore_cell_hint(user_request); | |
| if (reg_request_cell_base(lr)) | |
| return REG_REQ_IGNORE; | |
| if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) | |
| return REG_REQ_INTERSECT; | |
| /* | |
| * If the user knows better the user should set the regdom | |
| * to their country before the IE is picked up | |
| */ | |
| if (lr->initiator == NL80211_REGDOM_SET_BY_USER && | |
| lr->intersect) | |
| return REG_REQ_IGNORE; | |
| /* | |
| * Process user requests only after previous user/driver/core | |
| * requests have been processed | |
| */ | |
| if ((lr->initiator == NL80211_REGDOM_SET_BY_CORE || | |
| lr->initiator == NL80211_REGDOM_SET_BY_DRIVER || | |
| lr->initiator == NL80211_REGDOM_SET_BY_USER) && | |
| regdom_changes(lr->alpha2)) | |
| return REG_REQ_IGNORE; | |
| if (!regdom_changes(user_request->alpha2)) | |
| return REG_REQ_ALREADY_SET; | |
| return REG_REQ_OK; | |
| } | |
| /** | |
| * reg_process_hint_user - process user regulatory requests | |
| * @user_request: a pending user regulatory request | |
| * | |
| * The wireless subsystem can use this function to process | |
| * a regulatory request initiated by userspace. | |
| */ | |
| static enum reg_request_treatment | |
| reg_process_hint_user(struct regulatory_request *user_request) | |
| { | |
| enum reg_request_treatment treatment; | |
| treatment = __reg_process_hint_user(user_request); | |
| if (treatment == REG_REQ_IGNORE || | |
| treatment == REG_REQ_ALREADY_SET) | |
| return REG_REQ_IGNORE; | |
| user_request->intersect = treatment == REG_REQ_INTERSECT; | |
| user_request->processed = false; | |
| if (reg_query_database(user_request)) { | |
| reg_update_last_request(user_request); | |
| user_alpha2[0] = user_request->alpha2[0]; | |
| user_alpha2[1] = user_request->alpha2[1]; | |
| return REG_REQ_OK; | |
| } | |
| return REG_REQ_IGNORE; | |
| } | |
| static enum reg_request_treatment | |
| __reg_process_hint_driver(struct regulatory_request *driver_request) | |
| { | |
| struct regulatory_request *lr = get_last_request(); | |
| if (lr->initiator == NL80211_REGDOM_SET_BY_CORE) { | |
| if (regdom_changes(driver_request->alpha2)) | |
| return REG_REQ_OK; | |
| return REG_REQ_ALREADY_SET; | |
| } | |
| /* | |
| * This would happen if you unplug and plug your card | |
| * back in or if you add a new device for which the previously | |
| * loaded card also agrees on the regulatory domain. | |
| */ | |
| if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && | |
| !regdom_changes(driver_request->alpha2)) | |
| return REG_REQ_ALREADY_SET; | |
| return REG_REQ_INTERSECT; | |
| } | |
| /** | |
| * reg_process_hint_driver - process driver regulatory requests | |
| * @driver_request: a pending driver regulatory request | |
| * | |
| * The wireless subsystem can use this function to process | |
| * a regulatory request issued by an 802.11 driver. | |
| * | |
| * Returns one of the different reg request treatment values. | |
| */ | |
| static enum reg_request_treatment | |
| reg_process_hint_driver(struct wiphy *wiphy, | |
| struct regulatory_request *driver_request) | |
| { | |
| const struct ieee80211_regdomain *regd, *tmp; | |
| enum reg_request_treatment treatment; | |
| treatment = __reg_process_hint_driver(driver_request); | |
| switch (treatment) { | |
| case REG_REQ_OK: | |
| break; | |
| case REG_REQ_IGNORE: | |
| return REG_REQ_IGNORE; | |
| case REG_REQ_INTERSECT: | |
| case REG_REQ_ALREADY_SET: | |
| regd = reg_copy_regd(get_cfg80211_regdom()); | |
| if (IS_ERR(regd)) | |
| return REG_REQ_IGNORE; | |
| tmp = get_wiphy_regdom(wiphy); | |
| rcu_assign_pointer(wiphy->regd, regd); | |
| rcu_free_regdom(tmp); | |
| } | |
| driver_request->intersect = treatment == REG_REQ_INTERSECT; | |
| driver_request->processed = false; | |
| /* | |
| * Since CRDA will not be called in this case as we already | |
| * have applied the requested regulatory domain before we just | |
| * inform userspace we have processed the request | |
| */ | |
| if (treatment == REG_REQ_ALREADY_SET) { | |
| nl80211_send_reg_change_event(driver_request); | |
| reg_update_last_request(driver_request); | |
| reg_set_request_processed(); | |
| return REG_REQ_ALREADY_SET; | |
| } | |
| if (reg_query_database(driver_request)) { | |
| reg_update_last_request(driver_request); | |
| return REG_REQ_OK; | |
| } | |
| return REG_REQ_IGNORE; | |
| } | |
| static enum reg_request_treatment | |
| __reg_process_hint_country_ie(struct wiphy *wiphy, | |
| struct regulatory_request *country_ie_request) | |
| { | |
| struct wiphy *last_wiphy = NULL; | |
| struct regulatory_request *lr = get_last_request(); | |
| if (reg_request_cell_base(lr)) { | |
| /* Trust a Cell base station over the AP's country IE */ | |
| if (regdom_changes(country_ie_request->alpha2)) | |
| return REG_REQ_IGNORE; | |
| return REG_REQ_ALREADY_SET; | |
| } else { | |
| if (wiphy->regulatory_flags & REGULATORY_COUNTRY_IE_IGNORE) | |
| return REG_REQ_IGNORE; | |
| } | |
| if (unlikely(!is_an_alpha2(country_ie_request->alpha2))) | |
| return -EINVAL; | |
| if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) | |
| return REG_REQ_OK; | |
| last_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); | |
| if (last_wiphy != wiphy) { | |
| /* | |
| * Two cards with two APs claiming different | |
| * Country IE alpha2s. We could | |
| * intersect them, but that seems unlikely | |
| * to be correct. Reject second one for now. | |
| */ | |
| if (regdom_changes(country_ie_request->alpha2)) | |
| return REG_REQ_IGNORE; | |
| return REG_REQ_ALREADY_SET; | |
| } | |
| if (regdom_changes(country_ie_request->alpha2)) | |
| return REG_REQ_OK; | |
| return REG_REQ_ALREADY_SET; | |
| } | |
| /** | |
| * reg_process_hint_country_ie - process regulatory requests from country IEs | |
| * @country_ie_request: a regulatory request from a country IE | |
| * | |
| * The wireless subsystem can use this function to process | |
| * a regulatory request issued by a country Information Element. | |
| * | |
| * Returns one of the different reg request treatment values. | |
| */ | |
| static enum reg_request_treatment | |
| reg_process_hint_country_ie(struct wiphy *wiphy, | |
| struct regulatory_request *country_ie_request) | |
| { | |
| enum reg_request_treatment treatment; | |
| treatment = __reg_process_hint_country_ie(wiphy, country_ie_request); | |
| switch (treatment) { | |
| case REG_REQ_OK: | |
| break; | |
| case REG_REQ_IGNORE: | |
| return REG_REQ_IGNORE; | |
| case REG_REQ_ALREADY_SET: | |
| reg_free_request(country_ie_request); | |
| return REG_REQ_ALREADY_SET; | |
| case REG_REQ_INTERSECT: | |
| /* | |
| * This doesn't happen yet, not sure we | |
| * ever want to support it for this case. | |
| */ | |
| WARN_ONCE(1, "Unexpected intersection for country IEs"); | |
| return REG_REQ_IGNORE; | |
| } | |
| country_ie_request->intersect = false; | |
| country_ie_request->processed = false; | |
| if (reg_query_database(country_ie_request)) { | |
| reg_update_last_request(country_ie_request); | |
| return REG_REQ_OK; | |
| } | |
| return REG_REQ_IGNORE; | |
| } | |
| bool reg_dfs_domain_same(struct wiphy *wiphy1, struct wiphy *wiphy2) | |
| { | |
| const struct ieee80211_regdomain *wiphy1_regd = NULL; | |
| const struct ieee80211_regdomain *wiphy2_regd = NULL; | |
| const struct ieee80211_regdomain *cfg80211_regd = NULL; | |
| bool dfs_domain_same; | |
| rcu_read_lock(); | |
| cfg80211_regd = rcu_dereference(cfg80211_regdomain); | |
| wiphy1_regd = rcu_dereference(wiphy1->regd); | |
| if (!wiphy1_regd) | |
| wiphy1_regd = cfg80211_regd; | |
| wiphy2_regd = rcu_dereference(wiphy2->regd); | |
| if (!wiphy2_regd) | |
| wiphy2_regd = cfg80211_regd; | |
| dfs_domain_same = wiphy1_regd->dfs_region == wiphy2_regd->dfs_region; | |
| rcu_read_unlock(); | |
| return dfs_domain_same; | |
| } | |
| static void reg_copy_dfs_chan_state(struct ieee80211_channel *dst_chan, | |
| struct ieee80211_channel *src_chan) | |
| { | |
| if (!(dst_chan->flags & IEEE80211_CHAN_RADAR) || | |
| !(src_chan->flags & IEEE80211_CHAN_RADAR)) | |
| return; | |
| if (dst_chan->flags & IEEE80211_CHAN_DISABLED || | |
| src_chan->flags & IEEE80211_CHAN_DISABLED) | |
| return; | |
| if (src_chan->center_freq == dst_chan->center_freq && | |
| dst_chan->dfs_state == NL80211_DFS_USABLE) { | |
| dst_chan->dfs_state = src_chan->dfs_state; | |
| dst_chan->dfs_state_entered = src_chan->dfs_state_entered; | |
| } | |
| } | |
| static void wiphy_share_dfs_chan_state(struct wiphy *dst_wiphy, | |
| struct wiphy *src_wiphy) | |
| { | |
| struct ieee80211_supported_band *src_sband, *dst_sband; | |
| struct ieee80211_channel *src_chan, *dst_chan; | |
| int i, j, band; | |
| if (!reg_dfs_domain_same(dst_wiphy, src_wiphy)) | |
| return; | |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { | |
| dst_sband = dst_wiphy->bands[band]; | |
| src_sband = src_wiphy->bands[band]; | |
| if (!dst_sband || !src_sband) | |
| continue; | |
| for (i = 0; i < dst_sband->n_channels; i++) { | |
| dst_chan = &dst_sband->channels[i]; | |
| for (j = 0; j < src_sband->n_channels; j++) { | |
| src_chan = &src_sband->channels[j]; | |
| reg_copy_dfs_chan_state(dst_chan, src_chan); | |
| } | |
| } | |
| } | |
| } | |
| static void wiphy_all_share_dfs_chan_state(struct wiphy *wiphy) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| ASSERT_RTNL(); | |
| list_for_each_entry(rdev, &cfg80211_rdev_list, list) { | |
| if (wiphy == &rdev->wiphy) | |
| continue; | |
| wiphy_share_dfs_chan_state(wiphy, &rdev->wiphy); | |
| } | |
| } | |
| /* This processes *all* regulatory hints */ | |
| static void reg_process_hint(struct regulatory_request *reg_request) | |
| { | |
| struct wiphy *wiphy = NULL; | |
| enum reg_request_treatment treatment; | |
| enum nl80211_reg_initiator initiator = reg_request->initiator; | |
| if (reg_request->wiphy_idx != WIPHY_IDX_INVALID) | |
| wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx); | |
| switch (initiator) { | |
| case NL80211_REGDOM_SET_BY_CORE: | |
| treatment = reg_process_hint_core(reg_request); | |
| break; | |
| case NL80211_REGDOM_SET_BY_USER: | |
| treatment = reg_process_hint_user(reg_request); | |
| break; | |
| case NL80211_REGDOM_SET_BY_DRIVER: | |
| if (!wiphy) | |
| goto out_free; | |
| treatment = reg_process_hint_driver(wiphy, reg_request); | |
| break; | |
| case NL80211_REGDOM_SET_BY_COUNTRY_IE: | |
| if (!wiphy) | |
| goto out_free; | |
| treatment = reg_process_hint_country_ie(wiphy, reg_request); | |
| break; | |
| default: | |
| WARN(1, "invalid initiator %d\n", initiator); | |
| goto out_free; | |
| } | |
| if (treatment == REG_REQ_IGNORE) | |
| goto out_free; | |
| WARN(treatment != REG_REQ_OK && treatment != REG_REQ_ALREADY_SET, | |
| "unexpected treatment value %d\n", treatment); | |
| /* This is required so that the orig_* parameters are saved. | |
| * NOTE: treatment must be set for any case that reaches here! | |
| */ | |
| if (treatment == REG_REQ_ALREADY_SET && wiphy && | |
| wiphy->regulatory_flags & REGULATORY_STRICT_REG) { | |
| wiphy_update_regulatory(wiphy, initiator); | |
| wiphy_all_share_dfs_chan_state(wiphy); | |
| reg_check_channels(); | |
| } | |
| return; | |
| out_free: | |
| reg_free_request(reg_request); | |
| } | |
| static bool reg_only_self_managed_wiphys(void) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| struct wiphy *wiphy; | |
| bool self_managed_found = false; | |
| ASSERT_RTNL(); | |
| list_for_each_entry(rdev, &cfg80211_rdev_list, list) { | |
| wiphy = &rdev->wiphy; | |
| if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) | |
| self_managed_found = true; | |
| else | |
| return false; | |
| } | |
| /* make sure at least one self-managed wiphy exists */ | |
| return self_managed_found; | |
| } | |
| /* | |
| * Processes regulatory hints, this is all the NL80211_REGDOM_SET_BY_* | |
| * Regulatory hints come on a first come first serve basis and we | |
| * must process each one atomically. | |
| */ | |
| static void reg_process_pending_hints(void) | |
| { | |
| struct regulatory_request *reg_request, *lr; | |
| lr = get_last_request(); | |
| /* When last_request->processed becomes true this will be rescheduled */ | |
| if (lr && !lr->processed) { | |
| reg_process_hint(lr); | |
| return; | |
| } | |
| spin_lock(®_requests_lock); | |
| if (list_empty(®_requests_list)) { | |
| spin_unlock(®_requests_lock); | |
| return; | |
| } | |
| reg_request = list_first_entry(®_requests_list, | |
| struct regulatory_request, | |
| list); | |
| list_del_init(®_request->list); | |
| spin_unlock(®_requests_lock); | |
| if (reg_only_self_managed_wiphys()) { | |
| reg_free_request(reg_request); | |
| return; | |
| } | |
| reg_process_hint(reg_request); | |
| lr = get_last_request(); | |
| spin_lock(®_requests_lock); | |
| if (!list_empty(®_requests_list) && lr && lr->processed) | |
| schedule_work(®_work); | |
| spin_unlock(®_requests_lock); | |
| } | |
| /* Processes beacon hints -- this has nothing to do with country IEs */ | |
| static void reg_process_pending_beacon_hints(void) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| struct reg_beacon *pending_beacon, *tmp; | |
| /* This goes through the _pending_ beacon list */ | |
| spin_lock_bh(®_pending_beacons_lock); | |
| list_for_each_entry_safe(pending_beacon, tmp, | |
| ®_pending_beacons, list) { | |
| list_del_init(&pending_beacon->list); | |
| /* Applies the beacon hint to current wiphys */ | |
| list_for_each_entry(rdev, &cfg80211_rdev_list, list) | |
| wiphy_update_new_beacon(&rdev->wiphy, pending_beacon); | |
| /* Remembers the beacon hint for new wiphys or reg changes */ | |
| list_add_tail(&pending_beacon->list, ®_beacon_list); | |
| } | |
| spin_unlock_bh(®_pending_beacons_lock); | |
| } | |
| static void reg_process_self_managed_hints(void) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| struct wiphy *wiphy; | |
| const struct ieee80211_regdomain *tmp; | |
| const struct ieee80211_regdomain *regd; | |
| enum nl80211_band band; | |
| struct regulatory_request request = {}; | |
| list_for_each_entry(rdev, &cfg80211_rdev_list, list) { | |
| wiphy = &rdev->wiphy; | |
| spin_lock(®_requests_lock); | |
| regd = rdev->requested_regd; | |
| rdev->requested_regd = NULL; | |
| spin_unlock(®_requests_lock); | |
| if (regd == NULL) | |
| continue; | |
| tmp = get_wiphy_regdom(wiphy); | |
| rcu_assign_pointer(wiphy->regd, regd); | |
| rcu_free_regdom(tmp); | |
| for (band = 0; band < NUM_NL80211_BANDS; band++) | |
| handle_band_custom(wiphy, wiphy->bands[band], regd); | |
| reg_process_ht_flags(wiphy); | |
| request.wiphy_idx = get_wiphy_idx(wiphy); | |
| request.alpha2[0] = regd->alpha2[0]; | |
| request.alpha2[1] = regd->alpha2[1]; | |
| request.initiator = NL80211_REGDOM_SET_BY_DRIVER; | |
| nl80211_send_wiphy_reg_change_event(&request); | |
| } | |
| reg_check_channels(); | |
| } | |
| static void reg_todo(struct work_struct *work) | |
| { | |
| rtnl_lock(); | |
| reg_process_pending_hints(); | |
| reg_process_pending_beacon_hints(); | |
| reg_process_self_managed_hints(); | |
| rtnl_unlock(); | |
| } | |
| static void queue_regulatory_request(struct regulatory_request *request) | |
| { | |
| request->alpha2[0] = toupper(request->alpha2[0]); | |
| request->alpha2[1] = toupper(request->alpha2[1]); | |
| spin_lock(®_requests_lock); | |
| list_add_tail(&request->list, ®_requests_list); | |
| spin_unlock(®_requests_lock); | |
| schedule_work(®_work); | |
| } | |
| /* | |
| * Core regulatory hint -- happens during cfg80211_init() | |
| * and when we restore regulatory settings. | |
| */ | |
| static int regulatory_hint_core(const char *alpha2) | |
| { | |
| struct regulatory_request *request; | |
| request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); | |
| if (!request) | |
| return -ENOMEM; | |
| request->alpha2[0] = alpha2[0]; | |
| request->alpha2[1] = alpha2[1]; | |
| request->initiator = NL80211_REGDOM_SET_BY_CORE; | |
| request->wiphy_idx = WIPHY_IDX_INVALID; | |
| queue_regulatory_request(request); | |
| return 0; | |
| } | |
| /* User hints */ | |
| int regulatory_hint_user(const char *alpha2, | |
| enum nl80211_user_reg_hint_type user_reg_hint_type) | |
| { | |
| struct regulatory_request *request; | |
| if (WARN_ON(!alpha2)) | |
| return -EINVAL; | |
| request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); | |
| if (!request) | |
| return -ENOMEM; | |
| request->wiphy_idx = WIPHY_IDX_INVALID; | |
| request->alpha2[0] = alpha2[0]; | |
| request->alpha2[1] = alpha2[1]; | |
| request->initiator = NL80211_REGDOM_SET_BY_USER; | |
| request->user_reg_hint_type = user_reg_hint_type; | |
| /* Allow calling CRDA again */ | |
| reset_crda_timeouts(); | |
| queue_regulatory_request(request); | |
| return 0; | |
| } | |
| int regulatory_hint_indoor(bool is_indoor, u32 portid) | |
| { | |
| spin_lock(®_indoor_lock); | |
| /* It is possible that more than one user space process is trying to | |
| * configure the indoor setting. To handle such cases, clear the indoor | |
| * setting in case that some process does not think that the device | |
| * is operating in an indoor environment. In addition, if a user space | |
| * process indicates that it is controlling the indoor setting, save its | |
| * portid, i.e., make it the owner. | |
| */ | |
| reg_is_indoor = is_indoor; | |
| if (reg_is_indoor) { | |
| if (!reg_is_indoor_portid) | |
| reg_is_indoor_portid = portid; | |
| } else { | |
| reg_is_indoor_portid = 0; | |
| } | |
| spin_unlock(®_indoor_lock); | |
| if (!is_indoor) | |
| reg_check_channels(); | |
| return 0; | |
| } | |
| void regulatory_netlink_notify(u32 portid) | |
| { | |
| spin_lock(®_indoor_lock); | |
| if (reg_is_indoor_portid != portid) { | |
| spin_unlock(®_indoor_lock); | |
| return; | |
| } | |
| reg_is_indoor = false; | |
| reg_is_indoor_portid = 0; | |
| spin_unlock(®_indoor_lock); | |
| reg_check_channels(); | |
| } | |
| /* Driver hints */ | |
| int regulatory_hint(struct wiphy *wiphy, const char *alpha2) | |
| { | |
| struct regulatory_request *request; | |
| if (WARN_ON(!alpha2 || !wiphy)) | |
| return -EINVAL; | |
| wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG; | |
| request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); | |
| if (!request) | |
| return -ENOMEM; | |
| request->wiphy_idx = get_wiphy_idx(wiphy); | |
| request->alpha2[0] = alpha2[0]; | |
| request->alpha2[1] = alpha2[1]; | |
| request->initiator = NL80211_REGDOM_SET_BY_DRIVER; | |
| /* Allow calling CRDA again */ | |
| reset_crda_timeouts(); | |
| queue_regulatory_request(request); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(regulatory_hint); | |
| void regulatory_hint_country_ie(struct wiphy *wiphy, enum nl80211_band band, | |
| const u8 *country_ie, u8 country_ie_len) | |
| { | |
| char alpha2[2]; | |
| enum environment_cap env = ENVIRON_ANY; | |
| struct regulatory_request *request = NULL, *lr; | |
| /* IE len must be evenly divisible by 2 */ | |
| if (country_ie_len & 0x01) | |
| return; | |
| if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) | |
| return; | |
| request = kzalloc(sizeof(*request), GFP_KERNEL); | |
| if (!request) | |
| return; | |
| alpha2[0] = country_ie[0]; | |
| alpha2[1] = country_ie[1]; | |
| if (country_ie[2] == 'I') | |
| env = ENVIRON_INDOOR; | |
| else if (country_ie[2] == 'O') | |
| env = ENVIRON_OUTDOOR; | |
| rcu_read_lock(); | |
| lr = get_last_request(); | |
| if (unlikely(!lr)) | |
| goto out; | |
| /* | |
| * We will run this only upon a successful connection on cfg80211. | |
| * We leave conflict resolution to the workqueue, where can hold | |
| * the RTNL. | |
| */ | |
| if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && | |
| lr->wiphy_idx != WIPHY_IDX_INVALID) | |
| goto out; | |
| request->wiphy_idx = get_wiphy_idx(wiphy); | |
| request->alpha2[0] = alpha2[0]; | |
| request->alpha2[1] = alpha2[1]; | |
| request->initiator = NL80211_REGDOM_SET_BY_COUNTRY_IE; | |
| request->country_ie_env = env; | |
| /* Allow calling CRDA again */ | |
| reset_crda_timeouts(); | |
| queue_regulatory_request(request); | |
| request = NULL; | |
| out: | |
| kfree(request); | |
| rcu_read_unlock(); | |
| } | |
| static void restore_alpha2(char *alpha2, bool reset_user) | |
| { | |
| /* indicates there is no alpha2 to consider for restoration */ | |
| alpha2[0] = '9'; | |
| alpha2[1] = '7'; | |
| /* The user setting has precedence over the module parameter */ | |
| if (is_user_regdom_saved()) { | |
| /* Unless we're asked to ignore it and reset it */ | |
| if (reset_user) { | |
| pr_debug("Restoring regulatory settings including user preference\n"); | |
| user_alpha2[0] = '9'; | |
| user_alpha2[1] = '7'; | |
| /* | |
| * If we're ignoring user settings, we still need to | |
| * check the module parameter to ensure we put things | |
| * back as they were for a full restore. | |
| */ | |
| if (!is_world_regdom(ieee80211_regdom)) { | |
| pr_debug("Keeping preference on module parameter ieee80211_regdom: %c%c\n", | |
| ieee80211_regdom[0], ieee80211_regdom[1]); | |
| alpha2[0] = ieee80211_regdom[0]; | |
| alpha2[1] = ieee80211_regdom[1]; | |
| } | |
| } else { | |
| pr_debug("Restoring regulatory settings while preserving user preference for: %c%c\n", | |
| user_alpha2[0], user_alpha2[1]); | |
| alpha2[0] = user_alpha2[0]; | |
| alpha2[1] = user_alpha2[1]; | |
| } | |
| } else if (!is_world_regdom(ieee80211_regdom)) { | |
| pr_debug("Keeping preference on module parameter ieee80211_regdom: %c%c\n", | |
| ieee80211_regdom[0], ieee80211_regdom[1]); | |
| alpha2[0] = ieee80211_regdom[0]; | |
| alpha2[1] = ieee80211_regdom[1]; | |
| } else | |
| pr_debug("Restoring regulatory settings\n"); | |
| } | |
| static void restore_custom_reg_settings(struct wiphy *wiphy) | |
| { | |
| struct ieee80211_supported_band *sband; | |
| enum nl80211_band band; | |
| struct ieee80211_channel *chan; | |
| int i; | |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { | |
| sband = wiphy->bands[band]; | |
| if (!sband) | |
| continue; | |
| for (i = 0; i < sband->n_channels; i++) { | |
| chan = &sband->channels[i]; | |
| chan->flags = chan->orig_flags; | |
| chan->max_antenna_gain = chan->orig_mag; | |
| chan->max_power = chan->orig_mpwr; | |
| chan->beacon_found = false; | |
| } | |
| } | |
| } | |
| /* | |
| * Restoring regulatory settings involves ingoring any | |
| * possibly stale country IE information and user regulatory | |
| * settings if so desired, this includes any beacon hints | |
| * learned as we could have traveled outside to another country | |
| * after disconnection. To restore regulatory settings we do | |
| * exactly what we did at bootup: | |
| * | |
| * - send a core regulatory hint | |
| * - send a user regulatory hint if applicable | |
| * | |
| * Device drivers that send a regulatory hint for a specific country | |
| * keep their own regulatory domain on wiphy->regd so that does does | |
| * not need to be remembered. | |
| */ | |
| static void restore_regulatory_settings(bool reset_user) | |
| { | |
| char alpha2[2]; | |
| char world_alpha2[2]; | |
| struct reg_beacon *reg_beacon, *btmp; | |
| LIST_HEAD(tmp_reg_req_list); | |
| struct cfg80211_registered_device *rdev; | |
| ASSERT_RTNL(); | |
| /* | |
| * Clear the indoor setting in case that it is not controlled by user | |
| * space, as otherwise there is no guarantee that the device is still | |
| * operating in an indoor environment. | |
| */ | |
| spin_lock(®_indoor_lock); | |
| if (reg_is_indoor && !reg_is_indoor_portid) { | |
| reg_is_indoor = false; | |
| reg_check_channels(); | |
| } | |
| spin_unlock(®_indoor_lock); | |
| reset_regdomains(true, &world_regdom); | |
| restore_alpha2(alpha2, reset_user); | |
| /* | |
| * If there's any pending requests we simply | |
| * stash them to a temporary pending queue and | |
| * add then after we've restored regulatory | |
| * settings. | |
| */ | |
| spin_lock(®_requests_lock); | |
| list_splice_tail_init(®_requests_list, &tmp_reg_req_list); | |
| spin_unlock(®_requests_lock); | |
| /* Clear beacon hints */ | |
| spin_lock_bh(®_pending_beacons_lock); | |
| list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) { | |
| list_del(®_beacon->list); | |
| kfree(reg_beacon); | |
| } | |
| spin_unlock_bh(®_pending_beacons_lock); | |
| list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) { | |
| list_del(®_beacon->list); | |
| kfree(reg_beacon); | |
| } | |
| /* First restore to the basic regulatory settings */ | |
| world_alpha2[0] = cfg80211_world_regdom->alpha2[0]; | |
| world_alpha2[1] = cfg80211_world_regdom->alpha2[1]; | |
| list_for_each_entry(rdev, &cfg80211_rdev_list, list) { | |
| if (rdev->wiphy.regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) | |
| continue; | |
| if (rdev->wiphy.regulatory_flags & REGULATORY_CUSTOM_REG) | |
| restore_custom_reg_settings(&rdev->wiphy); | |
| } | |
| regulatory_hint_core(world_alpha2); | |
| /* | |
| * This restores the ieee80211_regdom module parameter | |
| * preference or the last user requested regulatory | |
| * settings, user regulatory settings takes precedence. | |
| */ | |
| if (is_an_alpha2(alpha2)) | |
| regulatory_hint_user(alpha2, NL80211_USER_REG_HINT_USER); | |
| spin_lock(®_requests_lock); | |
| list_splice_tail_init(&tmp_reg_req_list, ®_requests_list); | |
| spin_unlock(®_requests_lock); | |
| pr_debug("Kicking the queue\n"); | |
| schedule_work(®_work); | |
| } | |
| void regulatory_hint_disconnect(void) | |
| { | |
| pr_debug("All devices are disconnected, going to restore regulatory settings\n"); | |
| restore_regulatory_settings(false); | |
| } | |
| static bool freq_is_chan_12_13_14(u16 freq) | |
| { | |
| if (freq == ieee80211_channel_to_frequency(12, NL80211_BAND_2GHZ) || | |
| freq == ieee80211_channel_to_frequency(13, NL80211_BAND_2GHZ) || | |
| freq == ieee80211_channel_to_frequency(14, NL80211_BAND_2GHZ)) | |
| return true; | |
| return false; | |
| } | |
| static bool pending_reg_beacon(struct ieee80211_channel *beacon_chan) | |
| { | |
| struct reg_beacon *pending_beacon; | |
| list_for_each_entry(pending_beacon, ®_pending_beacons, list) | |
| if (beacon_chan->center_freq == | |
| pending_beacon->chan.center_freq) | |
| return true; | |
| return false; | |
| } | |
| int regulatory_hint_found_beacon(struct wiphy *wiphy, | |
| struct ieee80211_channel *beacon_chan, | |
| gfp_t gfp) | |
| { | |
| struct reg_beacon *reg_beacon; | |
| bool processing; | |
| if (beacon_chan->beacon_found || | |
| beacon_chan->flags & IEEE80211_CHAN_RADAR || | |
| (beacon_chan->band == NL80211_BAND_2GHZ && | |
| !freq_is_chan_12_13_14(beacon_chan->center_freq))) | |
| return 0; | |
| spin_lock_bh(®_pending_beacons_lock); | |
| processing = pending_reg_beacon(beacon_chan); | |
| spin_unlock_bh(®_pending_beacons_lock); | |
| if (processing) | |
| return 0; | |
| reg_beacon = kzalloc(sizeof(struct reg_beacon), gfp); | |
| if (!reg_beacon) | |
| return -ENOMEM; | |
| pr_debug("Found new beacon on frequency: %d MHz (Ch %d) on %s\n", | |
| beacon_chan->center_freq, | |
| ieee80211_frequency_to_channel(beacon_chan->center_freq), | |
| wiphy_name(wiphy)); | |
| memcpy(®_beacon->chan, beacon_chan, | |
| sizeof(struct ieee80211_channel)); | |
| /* | |
| * Since we can be called from BH or and non-BH context | |
| * we must use spin_lock_bh() | |
| */ | |
| spin_lock_bh(®_pending_beacons_lock); | |
| list_add_tail(®_beacon->list, ®_pending_beacons); | |
| spin_unlock_bh(®_pending_beacons_lock); | |
| schedule_work(®_work); | |
| return 0; | |
| } | |
| static void print_rd_rules(const struct ieee80211_regdomain *rd) | |
| { | |
| unsigned int i; | |
| const struct ieee80211_reg_rule *reg_rule = NULL; | |
| const struct ieee80211_freq_range *freq_range = NULL; | |
| const struct ieee80211_power_rule *power_rule = NULL; | |
| char bw[32], cac_time[32]; | |
| pr_debug(" (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)\n"); | |
| for (i = 0; i < rd->n_reg_rules; i++) { | |
| reg_rule = &rd->reg_rules[i]; | |
| freq_range = ®_rule->freq_range; | |
| power_rule = ®_rule->power_rule; | |
| if (reg_rule->flags & NL80211_RRF_AUTO_BW) | |
| snprintf(bw, sizeof(bw), "%d KHz, %d KHz AUTO", | |
| freq_range->max_bandwidth_khz, | |
| reg_get_max_bandwidth(rd, reg_rule)); | |
| else | |
| snprintf(bw, sizeof(bw), "%d KHz", | |
| freq_range->max_bandwidth_khz); | |
| if (reg_rule->flags & NL80211_RRF_DFS) | |
| scnprintf(cac_time, sizeof(cac_time), "%u s", | |
| reg_rule->dfs_cac_ms/1000); | |
| else | |
| scnprintf(cac_time, sizeof(cac_time), "N/A"); | |
| /* | |
| * There may not be documentation for max antenna gain | |
| * in certain regions | |
| */ | |
| if (power_rule->max_antenna_gain) | |
| pr_debug(" (%d KHz - %d KHz @ %s), (%d mBi, %d mBm), (%s)\n", | |
| freq_range->start_freq_khz, | |
| freq_range->end_freq_khz, | |
| bw, | |
| power_rule->max_antenna_gain, | |
| power_rule->max_eirp, | |
| cac_time); | |
| else | |
| pr_debug(" (%d KHz - %d KHz @ %s), (N/A, %d mBm), (%s)\n", | |
| freq_range->start_freq_khz, | |
| freq_range->end_freq_khz, | |
| bw, | |
| power_rule->max_eirp, | |
| cac_time); | |
| } | |
| } | |
| bool reg_supported_dfs_region(enum nl80211_dfs_regions dfs_region) | |
| { | |
| switch (dfs_region) { | |
| case NL80211_DFS_UNSET: | |
| case NL80211_DFS_FCC: | |
| case NL80211_DFS_ETSI: | |
| case NL80211_DFS_JP: | |
| return true; | |
| default: | |
| pr_debug("Ignoring uknown DFS master region: %d\n", dfs_region); | |
| return false; | |
| } | |
| } | |
| static void print_regdomain(const struct ieee80211_regdomain *rd) | |
| { | |
| struct regulatory_request *lr = get_last_request(); | |
| if (is_intersected_alpha2(rd->alpha2)) { | |
| if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { | |
| struct cfg80211_registered_device *rdev; | |
| rdev = cfg80211_rdev_by_wiphy_idx(lr->wiphy_idx); | |
| if (rdev) { | |
| pr_debug("Current regulatory domain updated by AP to: %c%c\n", | |
| rdev->country_ie_alpha2[0], | |
| rdev->country_ie_alpha2[1]); | |
| } else | |
| pr_debug("Current regulatory domain intersected:\n"); | |
| } else | |
| pr_debug("Current regulatory domain intersected:\n"); | |
| } else if (is_world_regdom(rd->alpha2)) { | |
| pr_debug("World regulatory domain updated:\n"); | |
| } else { | |
| if (is_unknown_alpha2(rd->alpha2)) | |
| pr_debug("Regulatory domain changed to driver built-in settings (unknown country)\n"); | |
| else { | |
| if (reg_request_cell_base(lr)) | |
| pr_debug("Regulatory domain changed to country: %c%c by Cell Station\n", | |
| rd->alpha2[0], rd->alpha2[1]); | |
| else | |
| pr_debug("Regulatory domain changed to country: %c%c\n", | |
| rd->alpha2[0], rd->alpha2[1]); | |
| } | |
| } | |
| pr_debug(" DFS Master region: %s", reg_dfs_region_str(rd->dfs_region)); | |
| print_rd_rules(rd); | |
| } | |
| static void print_regdomain_info(const struct ieee80211_regdomain *rd) | |
| { | |
| pr_debug("Regulatory domain: %c%c\n", rd->alpha2[0], rd->alpha2[1]); | |
| print_rd_rules(rd); | |
| } | |
| static int reg_set_rd_core(const struct ieee80211_regdomain *rd) | |
| { | |
| if (!is_world_regdom(rd->alpha2)) | |
| return -EINVAL; | |
| update_world_regdomain(rd); | |
| return 0; | |
| } | |
| static int reg_set_rd_user(const struct ieee80211_regdomain *rd, | |
| struct regulatory_request *user_request) | |
| { | |
| const struct ieee80211_regdomain *intersected_rd = NULL; | |
| if (!regdom_changes(rd->alpha2)) | |
| return -EALREADY; | |
| if (!is_valid_rd(rd)) { | |
| pr_err("Invalid regulatory domain detected: %c%c\n", | |
| rd->alpha2[0], rd->alpha2[1]); | |
| print_regdomain_info(rd); | |
| return -EINVAL; | |
| } | |
| if (!user_request->intersect) { | |
| reset_regdomains(false, rd); | |
| return 0; | |
| } | |
| intersected_rd = regdom_intersect(rd, get_cfg80211_regdom()); | |
| if (!intersected_rd) | |
| return -EINVAL; | |
| kfree(rd); | |
| rd = NULL; | |
| reset_regdomains(false, intersected_rd); | |
| return 0; | |
| } | |
| static int reg_set_rd_driver(const struct ieee80211_regdomain *rd, | |
| struct regulatory_request *driver_request) | |
| { | |
| const struct ieee80211_regdomain *regd; | |
| const struct ieee80211_regdomain *intersected_rd = NULL; | |
| const struct ieee80211_regdomain *tmp; | |
| struct wiphy *request_wiphy; | |
| if (is_world_regdom(rd->alpha2)) | |
| return -EINVAL; | |
| if (!regdom_changes(rd->alpha2)) | |
| return -EALREADY; | |
| if (!is_valid_rd(rd)) { | |
| pr_err("Invalid regulatory domain detected: %c%c\n", | |
| rd->alpha2[0], rd->alpha2[1]); | |
| print_regdomain_info(rd); | |
| return -EINVAL; | |
| } | |
| request_wiphy = wiphy_idx_to_wiphy(driver_request->wiphy_idx); | |
| if (!request_wiphy) | |
| return -ENODEV; | |
| if (!driver_request->intersect) { | |
| if (request_wiphy->regd) | |
| return -EALREADY; | |
| regd = reg_copy_regd(rd); | |
| if (IS_ERR(regd)) | |
| return PTR_ERR(regd); | |
| rcu_assign_pointer(request_wiphy->regd, regd); | |
| reset_regdomains(false, rd); | |
| return 0; | |
| } | |
| intersected_rd = regdom_intersect(rd, get_cfg80211_regdom()); | |
| if (!intersected_rd) | |
| return -EINVAL; | |
| /* | |
| * We can trash what CRDA provided now. | |
| * However if a driver requested this specific regulatory | |
| * domain we keep it for its private use | |
| */ | |
| tmp = get_wiphy_regdom(request_wiphy); | |
| rcu_assign_pointer(request_wiphy->regd, rd); | |
| rcu_free_regdom(tmp); | |
| rd = NULL; | |
| reset_regdomains(false, intersected_rd); | |
| return 0; | |
| } | |
| static int reg_set_rd_country_ie(const struct ieee80211_regdomain *rd, | |
| struct regulatory_request *country_ie_request) | |
| { | |
| struct wiphy *request_wiphy; | |
| if (!is_alpha2_set(rd->alpha2) && !is_an_alpha2(rd->alpha2) && | |
| !is_unknown_alpha2(rd->alpha2)) | |
| return -EINVAL; | |
| /* | |
| * Lets only bother proceeding on the same alpha2 if the current | |
| * rd is non static (it means CRDA was present and was used last) | |
| * and the pending request came in from a country IE | |
| */ | |
| if (!is_valid_rd(rd)) { | |
| pr_err("Invalid regulatory domain detected: %c%c\n", | |
| rd->alpha2[0], rd->alpha2[1]); | |
| print_regdomain_info(rd); | |
| return -EINVAL; | |
| } | |
| request_wiphy = wiphy_idx_to_wiphy(country_ie_request->wiphy_idx); | |
| if (!request_wiphy) | |
| return -ENODEV; | |
| if (country_ie_request->intersect) | |
| return -EINVAL; | |
| reset_regdomains(false, rd); | |
| return 0; | |
| } | |
| /* | |
| * Use this call to set the current regulatory domain. Conflicts with | |
| * multiple drivers can be ironed out later. Caller must've already | |
| * kmalloc'd the rd structure. | |
| */ | |
| int set_regdom(const struct ieee80211_regdomain *rd, | |
| enum ieee80211_regd_source regd_src) | |
| { | |
| struct regulatory_request *lr; | |
| bool user_reset = false; | |
| int r; | |
| if (!reg_is_valid_request(rd->alpha2)) { | |
| kfree(rd); | |
| return -EINVAL; | |
| } | |
| if (regd_src == REGD_SOURCE_CRDA) | |
| reset_crda_timeouts(); | |
| lr = get_last_request(); | |
| /* Note that this doesn't update the wiphys, this is done below */ | |
| switch (lr->initiator) { | |
| case NL80211_REGDOM_SET_BY_CORE: | |
| r = reg_set_rd_core(rd); | |
| break; | |
| case NL80211_REGDOM_SET_BY_USER: | |
| r = reg_set_rd_user(rd, lr); | |
| user_reset = true; | |
| break; | |
| case NL80211_REGDOM_SET_BY_DRIVER: | |
| r = reg_set_rd_driver(rd, lr); | |
| break; | |
| case NL80211_REGDOM_SET_BY_COUNTRY_IE: | |
| r = reg_set_rd_country_ie(rd, lr); | |
| break; | |
| default: | |
| WARN(1, "invalid initiator %d\n", lr->initiator); | |
| kfree(rd); | |
| return -EINVAL; | |
| } | |
| if (r) { | |
| switch (r) { | |
| case -EALREADY: | |
| reg_set_request_processed(); | |
| break; | |
| default: | |
| /* Back to world regulatory in case of errors */ | |
| restore_regulatory_settings(user_reset); | |
| } | |
| kfree(rd); | |
| return r; | |
| } | |
| /* This would make this whole thing pointless */ | |
| if (WARN_ON(!lr->intersect && rd != get_cfg80211_regdom())) | |
| return -EINVAL; | |
| /* update all wiphys now with the new established regulatory domain */ | |
| update_all_wiphy_regulatory(lr->initiator); | |
| print_regdomain(get_cfg80211_regdom()); | |
| nl80211_send_reg_change_event(lr); | |
| reg_set_request_processed(); | |
| return 0; | |
| } | |
| static int __regulatory_set_wiphy_regd(struct wiphy *wiphy, | |
| struct ieee80211_regdomain *rd) | |
| { | |
| const struct ieee80211_regdomain *regd; | |
| const struct ieee80211_regdomain *prev_regd; | |
| struct cfg80211_registered_device *rdev; | |
| if (WARN_ON(!wiphy || !rd)) | |
| return -EINVAL; | |
| if (WARN(!(wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED), | |
| "wiphy should have REGULATORY_WIPHY_SELF_MANAGED\n")) | |
| return -EPERM; | |
| if (WARN(!is_valid_rd(rd), "Invalid regulatory domain detected\n")) { | |
| print_regdomain_info(rd); | |
| return -EINVAL; | |
| } | |
| regd = reg_copy_regd(rd); | |
| if (IS_ERR(regd)) | |
| return PTR_ERR(regd); | |
| rdev = wiphy_to_rdev(wiphy); | |
| spin_lock(®_requests_lock); | |
| prev_regd = rdev->requested_regd; | |
| rdev->requested_regd = regd; | |
| spin_unlock(®_requests_lock); | |
| kfree(prev_regd); | |
| return 0; | |
| } | |
| int regulatory_set_wiphy_regd(struct wiphy *wiphy, | |
| struct ieee80211_regdomain *rd) | |
| { | |
| int ret = __regulatory_set_wiphy_regd(wiphy, rd); | |
| if (ret) | |
| return ret; | |
| schedule_work(®_work); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(regulatory_set_wiphy_regd); | |
| int regulatory_set_wiphy_regd_sync_rtnl(struct wiphy *wiphy, | |
| struct ieee80211_regdomain *rd) | |
| { | |
| int ret; | |
| ASSERT_RTNL(); | |
| ret = __regulatory_set_wiphy_regd(wiphy, rd); | |
| if (ret) | |
| return ret; | |
| /* process the request immediately */ | |
| reg_process_self_managed_hints(); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(regulatory_set_wiphy_regd_sync_rtnl); | |
| void wiphy_regulatory_register(struct wiphy *wiphy) | |
| { | |
| struct regulatory_request *lr; | |
| /* self-managed devices ignore external hints */ | |
| if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) | |
| wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS | | |
| REGULATORY_COUNTRY_IE_IGNORE; | |
| if (!reg_dev_ignore_cell_hint(wiphy)) | |
| reg_num_devs_support_basehint++; | |
| lr = get_last_request(); | |
| wiphy_update_regulatory(wiphy, lr->initiator); | |
| wiphy_all_share_dfs_chan_state(wiphy); | |
| } | |
| void wiphy_regulatory_deregister(struct wiphy *wiphy) | |
| { | |
| struct wiphy *request_wiphy = NULL; | |
| struct regulatory_request *lr; | |
| lr = get_last_request(); | |
| if (!reg_dev_ignore_cell_hint(wiphy)) | |
| reg_num_devs_support_basehint--; | |
| rcu_free_regdom(get_wiphy_regdom(wiphy)); | |
| RCU_INIT_POINTER(wiphy->regd, NULL); | |
| if (lr) | |
| request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); | |
| if (!request_wiphy || request_wiphy != wiphy) | |
| return; | |
| lr->wiphy_idx = WIPHY_IDX_INVALID; | |
| lr->country_ie_env = ENVIRON_ANY; | |
| } | |
| /* | |
| * See http://www.fcc.gov/document/5-ghz-unlicensed-spectrum-unii, for | |
| * UNII band definitions | |
| */ | |
| int cfg80211_get_unii(int freq) | |
| { | |
| /* UNII-1 */ | |
| if (freq >= 5150 && freq <= 5250) | |
| return 0; | |
| /* UNII-2A */ | |
| if (freq > 5250 && freq <= 5350) | |
| return 1; | |
| /* UNII-2B */ | |
| if (freq > 5350 && freq <= 5470) | |
| return 2; | |
| /* UNII-2C */ | |
| if (freq > 5470 && freq <= 5725) | |
| return 3; | |
| /* UNII-3 */ | |
| if (freq > 5725 && freq <= 5825) | |
| return 4; | |
| return -EINVAL; | |
| } | |
| bool regulatory_indoor_allowed(void) | |
| { | |
| return reg_is_indoor; | |
| } | |
| bool regulatory_pre_cac_allowed(struct wiphy *wiphy) | |
| { | |
| const struct ieee80211_regdomain *regd = NULL; | |
| const struct ieee80211_regdomain *wiphy_regd = NULL; | |
| bool pre_cac_allowed = false; | |
| rcu_read_lock(); | |
| regd = rcu_dereference(cfg80211_regdomain); | |
| wiphy_regd = rcu_dereference(wiphy->regd); | |
| if (!wiphy_regd) { | |
| if (regd->dfs_region == NL80211_DFS_ETSI) | |
| pre_cac_allowed = true; | |
| rcu_read_unlock(); | |
| return pre_cac_allowed; | |
| } | |
| if (regd->dfs_region == wiphy_regd->dfs_region && | |
| wiphy_regd->dfs_region == NL80211_DFS_ETSI) | |
| pre_cac_allowed = true; | |
| rcu_read_unlock(); | |
| return pre_cac_allowed; | |
| } | |
| void regulatory_propagate_dfs_state(struct wiphy *wiphy, | |
| struct cfg80211_chan_def *chandef, | |
| enum nl80211_dfs_state dfs_state, | |
| enum nl80211_radar_event event) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| ASSERT_RTNL(); | |
| if (WARN_ON(!cfg80211_chandef_valid(chandef))) | |
| return; | |
| list_for_each_entry(rdev, &cfg80211_rdev_list, list) { | |
| if (wiphy == &rdev->wiphy) | |
| continue; | |
| if (!reg_dfs_domain_same(wiphy, &rdev->wiphy)) | |
| continue; | |
| if (!ieee80211_get_channel(&rdev->wiphy, | |
| chandef->chan->center_freq)) | |
| continue; | |
| cfg80211_set_dfs_state(&rdev->wiphy, chandef, dfs_state); | |
| if (event == NL80211_RADAR_DETECTED || | |
| event == NL80211_RADAR_CAC_FINISHED) | |
| cfg80211_sched_dfs_chan_update(rdev); | |
| nl80211_radar_notify(rdev, chandef, event, NULL, GFP_KERNEL); | |
| } | |
| } | |
| int __init regulatory_init(void) | |
| { | |
| int err = 0; | |
| reg_pdev = platform_device_register_simple("regulatory", 0, NULL, 0); | |
| if (IS_ERR(reg_pdev)) | |
| return PTR_ERR(reg_pdev); | |
| spin_lock_init(®_requests_lock); | |
| spin_lock_init(®_pending_beacons_lock); | |
| spin_lock_init(®_indoor_lock); | |
| reg_regdb_size_check(); | |
| rcu_assign_pointer(cfg80211_regdomain, cfg80211_world_regdom); | |
| user_alpha2[0] = '9'; | |
| user_alpha2[1] = '7'; | |
| /* We always try to get an update for the static regdomain */ | |
| err = regulatory_hint_core(cfg80211_world_regdom->alpha2); | |
| if (err) { | |
| if (err == -ENOMEM) { | |
| platform_device_unregister(reg_pdev); | |
| return err; | |
| } | |
| /* | |
| * N.B. kobject_uevent_env() can fail mainly for when we're out | |
| * memory which is handled and propagated appropriately above | |
| * but it can also fail during a netlink_broadcast() or during | |
| * early boot for call_usermodehelper(). For now treat these | |
| * errors as non-fatal. | |
| */ | |
| pr_err("kobject_uevent_env() was unable to call CRDA during init\n"); | |
| } | |
| /* | |
| * Finally, if the user set the module parameter treat it | |
| * as a user hint. | |
| */ | |
| if (!is_world_regdom(ieee80211_regdom)) | |
| regulatory_hint_user(ieee80211_regdom, | |
| NL80211_USER_REG_HINT_USER); | |
| return 0; | |
| } | |
| void regulatory_exit(void) | |
| { | |
| struct regulatory_request *reg_request, *tmp; | |
| struct reg_beacon *reg_beacon, *btmp; | |
| cancel_work_sync(®_work); | |
| cancel_crda_timeout_sync(); | |
| cancel_delayed_work_sync(®_check_chans); | |
| /* Lock to suppress warnings */ | |
| rtnl_lock(); | |
| reset_regdomains(true, NULL); | |
| rtnl_unlock(); | |
| dev_set_uevent_suppress(®_pdev->dev, true); | |
| platform_device_unregister(reg_pdev); | |
| list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) { | |
| list_del(®_beacon->list); | |
| kfree(reg_beacon); | |
| } | |
| list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) { | |
| list_del(®_beacon->list); | |
| kfree(reg_beacon); | |
| } | |
| list_for_each_entry_safe(reg_request, tmp, ®_requests_list, list) { | |
| list_del(®_request->list); | |
| kfree(reg_request); | |
| } | |
| } |