| /* | |
| * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved. | |
| * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved. | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public | |
| * License as published by the Free Software Foundation; | |
| * either version 2, or (at your option) any later version. | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even | |
| * the implied warranty of MERCHANTABILITY or FITNESS FOR | |
| * A PARTICULAR PURPOSE.See the GNU General Public License | |
| * for more details. | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., | |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| */ | |
| #include <linux/compiler.h> | |
| #include <linux/module.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/slab.h> | |
| #include <linux/stat.h> | |
| #include <linux/via-core.h> | |
| #include <linux/via_i2c.h> | |
| #include <asm/olpc.h> | |
| #define _MASTER_FILE | |
| #include "global.h" | |
| static char *viafb_name = "Via"; | |
| static u32 pseudo_pal[17]; | |
| /* video mode */ | |
| static char *viafb_mode; | |
| static char *viafb_mode1; | |
| static int viafb_bpp = 32; | |
| static int viafb_bpp1 = 32; | |
| static unsigned int viafb_second_offset; | |
| static int viafb_second_size; | |
| static int viafb_accel = 1; | |
| /* Added for specifying active devices.*/ | |
| static char *viafb_active_dev; | |
| /*Added for specify lcd output port*/ | |
| static char *viafb_lcd_port = ""; | |
| static char *viafb_dvi_port = ""; | |
| static void retrieve_device_setting(struct viafb_ioctl_setting | |
| *setting_info); | |
| static int viafb_pan_display(struct fb_var_screeninfo *var, | |
| struct fb_info *info); | |
| static struct fb_ops viafb_ops; | |
| /* supported output devices on each IGP | |
| * only CX700, VX800, VX855, VX900 were documented | |
| * VIA_CRT should be everywhere | |
| * VIA_6C can be onle pre-CX700 (probably only on CLE266) as 6C is used for PLL | |
| * source selection on CX700 and later | |
| * K400 seems to support VIA_96, VIA_DVP1, VIA_LVDS{1,2} as in viamode.c | |
| */ | |
| static const u32 supported_odev_map[] = { | |
| [UNICHROME_CLE266] = VIA_CRT | VIA_LDVP0 | VIA_LDVP1, | |
| [UNICHROME_K400] = VIA_CRT | VIA_DVP0 | VIA_DVP1 | VIA_LVDS1 | |
| | VIA_LVDS2, | |
| [UNICHROME_K800] = VIA_CRT | VIA_DVP0 | VIA_DVP1 | VIA_LVDS1 | |
| | VIA_LVDS2, | |
| [UNICHROME_PM800] = VIA_CRT | VIA_DVP0 | VIA_DVP1 | VIA_LVDS1 | |
| | VIA_LVDS2, | |
| [UNICHROME_CN700] = VIA_CRT | VIA_DVP0 | VIA_DVP1 | VIA_LVDS1 | |
| | VIA_LVDS2, | |
| [UNICHROME_CX700] = VIA_CRT | VIA_DVP1 | VIA_LVDS1 | VIA_LVDS2, | |
| [UNICHROME_CN750] = VIA_CRT | VIA_DVP1 | VIA_LVDS1 | VIA_LVDS2, | |
| [UNICHROME_K8M890] = VIA_CRT | VIA_DVP1 | VIA_LVDS1 | VIA_LVDS2, | |
| [UNICHROME_P4M890] = VIA_CRT | VIA_DVP1 | VIA_LVDS1 | VIA_LVDS2, | |
| [UNICHROME_P4M900] = VIA_CRT | VIA_DVP1 | VIA_LVDS1 | VIA_LVDS2, | |
| [UNICHROME_VX800] = VIA_CRT | VIA_DVP1 | VIA_LVDS1 | VIA_LVDS2, | |
| [UNICHROME_VX855] = VIA_CRT | VIA_DVP1 | VIA_LVDS1 | VIA_LVDS2, | |
| [UNICHROME_VX900] = VIA_CRT | VIA_DVP1 | VIA_LVDS1 | VIA_LVDS2, | |
| }; | |
| static void viafb_fill_var_color_info(struct fb_var_screeninfo *var, u8 depth) | |
| { | |
| var->grayscale = 0; | |
| var->red.msb_right = 0; | |
| var->green.msb_right = 0; | |
| var->blue.msb_right = 0; | |
| var->transp.offset = 0; | |
| var->transp.length = 0; | |
| var->transp.msb_right = 0; | |
| var->nonstd = 0; | |
| switch (depth) { | |
| case 8: | |
| var->bits_per_pixel = 8; | |
| var->red.offset = 0; | |
| var->green.offset = 0; | |
| var->blue.offset = 0; | |
| var->red.length = 8; | |
| var->green.length = 8; | |
| var->blue.length = 8; | |
| break; | |
| case 15: | |
| var->bits_per_pixel = 16; | |
| var->red.offset = 10; | |
| var->green.offset = 5; | |
| var->blue.offset = 0; | |
| var->red.length = 5; | |
| var->green.length = 5; | |
| var->blue.length = 5; | |
| break; | |
| case 16: | |
| var->bits_per_pixel = 16; | |
| var->red.offset = 11; | |
| var->green.offset = 5; | |
| var->blue.offset = 0; | |
| var->red.length = 5; | |
| var->green.length = 6; | |
| var->blue.length = 5; | |
| break; | |
| case 24: | |
| var->bits_per_pixel = 32; | |
| var->red.offset = 16; | |
| var->green.offset = 8; | |
| var->blue.offset = 0; | |
| var->red.length = 8; | |
| var->green.length = 8; | |
| var->blue.length = 8; | |
| break; | |
| case 30: | |
| var->bits_per_pixel = 32; | |
| var->red.offset = 20; | |
| var->green.offset = 10; | |
| var->blue.offset = 0; | |
| var->red.length = 10; | |
| var->green.length = 10; | |
| var->blue.length = 10; | |
| break; | |
| } | |
| } | |
| static void viafb_update_fix(struct fb_info *info) | |
| { | |
| u32 bpp = info->var.bits_per_pixel; | |
| info->fix.visual = | |
| bpp == 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; | |
| info->fix.line_length = ALIGN(info->var.xres_virtual * bpp / 8, | |
| VIA_PITCH_SIZE); | |
| } | |
| static void viafb_setup_fixinfo(struct fb_fix_screeninfo *fix, | |
| struct viafb_par *viaparinfo) | |
| { | |
| memset(fix, 0, sizeof(struct fb_fix_screeninfo)); | |
| strcpy(fix->id, viafb_name); | |
| fix->smem_start = viaparinfo->fbmem; | |
| fix->smem_len = viaparinfo->fbmem_free; | |
| fix->type = FB_TYPE_PACKED_PIXELS; | |
| fix->type_aux = 0; | |
| fix->visual = FB_VISUAL_TRUECOLOR; | |
| fix->xpanstep = fix->ywrapstep = 0; | |
| fix->ypanstep = 1; | |
| /* Just tell the accel name */ | |
| viafbinfo->fix.accel = FB_ACCEL_VIA_UNICHROME; | |
| } | |
| static int viafb_open(struct fb_info *info, int user) | |
| { | |
| DEBUG_MSG(KERN_INFO "viafb_open!\n"); | |
| return 0; | |
| } | |
| static int viafb_release(struct fb_info *info, int user) | |
| { | |
| DEBUG_MSG(KERN_INFO "viafb_release!\n"); | |
| return 0; | |
| } | |
| static inline int get_var_refresh(struct fb_var_screeninfo *var) | |
| { | |
| u32 htotal, vtotal; | |
| htotal = var->left_margin + var->xres + var->right_margin | |
| + var->hsync_len; | |
| vtotal = var->upper_margin + var->yres + var->lower_margin | |
| + var->vsync_len; | |
| return PICOS2KHZ(var->pixclock) * 1000 / (htotal * vtotal); | |
| } | |
| static int viafb_check_var(struct fb_var_screeninfo *var, | |
| struct fb_info *info) | |
| { | |
| int depth, refresh; | |
| struct viafb_par *ppar = info->par; | |
| u32 line; | |
| DEBUG_MSG(KERN_INFO "viafb_check_var!\n"); | |
| /* Sanity check */ | |
| /* HW neither support interlacte nor double-scaned mode */ | |
| if (var->vmode & FB_VMODE_INTERLACED || var->vmode & FB_VMODE_DOUBLE) | |
| return -EINVAL; | |
| /* the refresh rate is not important here, as we only want to know | |
| * whether the resolution exists | |
| */ | |
| if (!viafb_get_best_mode(var->xres, var->yres, 60)) { | |
| DEBUG_MSG(KERN_INFO | |
| "viafb: Mode %dx%dx%d not supported!!\n", | |
| var->xres, var->yres, var->bits_per_pixel); | |
| return -EINVAL; | |
| } | |
| depth = fb_get_color_depth(var, &info->fix); | |
| if (!depth) | |
| depth = var->bits_per_pixel; | |
| if (depth < 0 || depth > 32) | |
| return -EINVAL; | |
| else if (!depth) | |
| depth = 24; | |
| else if (depth == 15 && viafb_dual_fb && ppar->iga_path == IGA1) | |
| depth = 15; | |
| else if (depth == 30) | |
| depth = 30; | |
| else if (depth <= 8) | |
| depth = 8; | |
| else if (depth <= 16) | |
| depth = 16; | |
| else | |
| depth = 24; | |
| viafb_fill_var_color_info(var, depth); | |
| if (var->xres_virtual < var->xres) | |
| var->xres_virtual = var->xres; | |
| line = ALIGN(var->xres_virtual * var->bits_per_pixel / 8, | |
| VIA_PITCH_SIZE); | |
| if (line > VIA_PITCH_MAX || line * var->yres_virtual > ppar->memsize) | |
| return -EINVAL; | |
| /* Based on var passed in to calculate the refresh, | |
| * because our driver use some modes special. | |
| */ | |
| refresh = viafb_get_refresh(var->xres, var->yres, | |
| get_var_refresh(var)); | |
| /* Adjust var according to our driver's own table */ | |
| viafb_fill_var_timing_info(var, | |
| viafb_get_best_mode(var->xres, var->yres, refresh)); | |
| if (var->accel_flags & FB_ACCELF_TEXT && | |
| !ppar->shared->vdev->engine_mmio) | |
| var->accel_flags = 0; | |
| return 0; | |
| } | |
| static int viafb_set_par(struct fb_info *info) | |
| { | |
| struct viafb_par *viapar = info->par; | |
| int refresh; | |
| DEBUG_MSG(KERN_INFO "viafb_set_par!\n"); | |
| viafb_update_fix(info); | |
| viapar->depth = fb_get_color_depth(&info->var, &info->fix); | |
| viafb_update_device_setting(viafbinfo->var.xres, viafbinfo->var.yres, | |
| viafbinfo->var.bits_per_pixel, 0); | |
| if (viafb_dual_fb) { | |
| viafb_update_device_setting(viafbinfo1->var.xres, | |
| viafbinfo1->var.yres, viafbinfo1->var.bits_per_pixel, | |
| 1); | |
| } else if (viafb_SAMM_ON == 1) { | |
| DEBUG_MSG(KERN_INFO | |
| "viafb_second_xres = %d, viafb_second_yres = %d, bpp = %d\n", | |
| viafb_second_xres, viafb_second_yres, viafb_bpp1); | |
| viafb_update_device_setting(viafb_second_xres, | |
| viafb_second_yres, viafb_bpp1, 1); | |
| } | |
| refresh = get_var_refresh(&info->var); | |
| if (viafb_dual_fb && viapar->iga_path == IGA2) { | |
| viafb_bpp1 = info->var.bits_per_pixel; | |
| viafb_refresh1 = refresh; | |
| } else { | |
| viafb_bpp = info->var.bits_per_pixel; | |
| viafb_refresh = refresh; | |
| } | |
| if (info->var.accel_flags & FB_ACCELF_TEXT) | |
| info->flags &= ~FBINFO_HWACCEL_DISABLED; | |
| else | |
| info->flags |= FBINFO_HWACCEL_DISABLED; | |
| viafb_setmode(); | |
| viafb_pan_display(&info->var, info); | |
| return 0; | |
| } | |
| /* Set one color register */ | |
| static int viafb_setcolreg(unsigned regno, unsigned red, unsigned green, | |
| unsigned blue, unsigned transp, struct fb_info *info) | |
| { | |
| struct viafb_par *viapar = info->par; | |
| u32 r, g, b; | |
| if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR) { | |
| if (regno > 255) | |
| return -EINVAL; | |
| if (!viafb_dual_fb || viapar->iga_path == IGA1) | |
| viafb_set_primary_color_register(regno, red >> 8, | |
| green >> 8, blue >> 8); | |
| if (!viafb_dual_fb || viapar->iga_path == IGA2) | |
| viafb_set_secondary_color_register(regno, red >> 8, | |
| green >> 8, blue >> 8); | |
| } else { | |
| if (regno > 15) | |
| return -EINVAL; | |
| r = (red >> (16 - info->var.red.length)) | |
| << info->var.red.offset; | |
| b = (blue >> (16 - info->var.blue.length)) | |
| << info->var.blue.offset; | |
| g = (green >> (16 - info->var.green.length)) | |
| << info->var.green.offset; | |
| ((u32 *) info->pseudo_palette)[regno] = r | g | b; | |
| } | |
| return 0; | |
| } | |
| static int viafb_pan_display(struct fb_var_screeninfo *var, | |
| struct fb_info *info) | |
| { | |
| struct viafb_par *viapar = info->par; | |
| u32 vram_addr = viapar->vram_addr | |
| + var->yoffset * info->fix.line_length | |
| + var->xoffset * info->var.bits_per_pixel / 8; | |
| DEBUG_MSG(KERN_DEBUG "viafb_pan_display, address = %d\n", vram_addr); | |
| if (!viafb_dual_fb) { | |
| via_set_primary_address(vram_addr); | |
| via_set_secondary_address(vram_addr); | |
| } else if (viapar->iga_path == IGA1) | |
| via_set_primary_address(vram_addr); | |
| else | |
| via_set_secondary_address(vram_addr); | |
| return 0; | |
| } | |
| static int viafb_blank(int blank_mode, struct fb_info *info) | |
| { | |
| DEBUG_MSG(KERN_INFO "viafb_blank!\n"); | |
| /* clear DPMS setting */ | |
| switch (blank_mode) { | |
| case FB_BLANK_UNBLANK: | |
| /* Screen: On, HSync: On, VSync: On */ | |
| /* control CRT monitor power management */ | |
| via_set_state(VIA_CRT, VIA_STATE_ON); | |
| break; | |
| case FB_BLANK_HSYNC_SUSPEND: | |
| /* Screen: Off, HSync: Off, VSync: On */ | |
| /* control CRT monitor power management */ | |
| via_set_state(VIA_CRT, VIA_STATE_STANDBY); | |
| break; | |
| case FB_BLANK_VSYNC_SUSPEND: | |
| /* Screen: Off, HSync: On, VSync: Off */ | |
| /* control CRT monitor power management */ | |
| via_set_state(VIA_CRT, VIA_STATE_SUSPEND); | |
| break; | |
| case FB_BLANK_POWERDOWN: | |
| /* Screen: Off, HSync: Off, VSync: Off */ | |
| /* control CRT monitor power management */ | |
| via_set_state(VIA_CRT, VIA_STATE_OFF); | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg) | |
| { | |
| union { | |
| struct viafb_ioctl_mode viamode; | |
| struct viafb_ioctl_samm viasamm; | |
| struct viafb_driver_version driver_version; | |
| struct fb_var_screeninfo sec_var; | |
| struct _panel_size_pos_info panel_pos_size_para; | |
| struct viafb_ioctl_setting viafb_setting; | |
| struct device_t active_dev; | |
| } u; | |
| u32 state_info = 0; | |
| u32 *viafb_gamma_table; | |
| char driver_name[] = "viafb"; | |
| u32 __user *argp = (u32 __user *) arg; | |
| u32 gpu32; | |
| DEBUG_MSG(KERN_INFO "viafb_ioctl: 0x%X !!\n", cmd); | |
| printk(KERN_WARNING "viafb_ioctl: Please avoid this interface as it is unstable and might change or vanish at any time!\n"); | |
| memset(&u, 0, sizeof(u)); | |
| switch (cmd) { | |
| case VIAFB_GET_CHIP_INFO: | |
| if (copy_to_user(argp, viaparinfo->chip_info, | |
| sizeof(struct chip_information))) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_GET_INFO_SIZE: | |
| return put_user((u32)sizeof(struct viafb_ioctl_info), argp); | |
| case VIAFB_GET_INFO: | |
| return viafb_ioctl_get_viafb_info(arg); | |
| case VIAFB_HOTPLUG: | |
| return put_user(viafb_ioctl_hotplug(info->var.xres, | |
| info->var.yres, | |
| info->var.bits_per_pixel), argp); | |
| case VIAFB_SET_HOTPLUG_FLAG: | |
| if (copy_from_user(&gpu32, argp, sizeof(gpu32))) | |
| return -EFAULT; | |
| viafb_hotplug = (gpu32) ? 1 : 0; | |
| break; | |
| case VIAFB_GET_RESOLUTION: | |
| u.viamode.xres = (u32) viafb_hotplug_Xres; | |
| u.viamode.yres = (u32) viafb_hotplug_Yres; | |
| u.viamode.refresh = (u32) viafb_hotplug_refresh; | |
| u.viamode.bpp = (u32) viafb_hotplug_bpp; | |
| if (viafb_SAMM_ON == 1) { | |
| u.viamode.xres_sec = viafb_second_xres; | |
| u.viamode.yres_sec = viafb_second_yres; | |
| u.viamode.virtual_xres_sec = viafb_dual_fb ? viafbinfo1->var.xres_virtual : viafbinfo->var.xres_virtual; | |
| u.viamode.virtual_yres_sec = viafb_dual_fb ? viafbinfo1->var.yres_virtual : viafbinfo->var.yres_virtual; | |
| u.viamode.refresh_sec = viafb_refresh1; | |
| u.viamode.bpp_sec = viafb_bpp1; | |
| } else { | |
| u.viamode.xres_sec = 0; | |
| u.viamode.yres_sec = 0; | |
| u.viamode.virtual_xres_sec = 0; | |
| u.viamode.virtual_yres_sec = 0; | |
| u.viamode.refresh_sec = 0; | |
| u.viamode.bpp_sec = 0; | |
| } | |
| if (copy_to_user(argp, &u.viamode, sizeof(u.viamode))) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_GET_SAMM_INFO: | |
| u.viasamm.samm_status = viafb_SAMM_ON; | |
| if (viafb_SAMM_ON == 1) { | |
| if (viafb_dual_fb) { | |
| u.viasamm.size_prim = viaparinfo->fbmem_free; | |
| u.viasamm.size_sec = viaparinfo1->fbmem_free; | |
| } else { | |
| if (viafb_second_size) { | |
| u.viasamm.size_prim = | |
| viaparinfo->fbmem_free - | |
| viafb_second_size * 1024 * 1024; | |
| u.viasamm.size_sec = | |
| viafb_second_size * 1024 * 1024; | |
| } else { | |
| u.viasamm.size_prim = | |
| viaparinfo->fbmem_free >> 1; | |
| u.viasamm.size_sec = | |
| (viaparinfo->fbmem_free >> 1); | |
| } | |
| } | |
| u.viasamm.mem_base = viaparinfo->fbmem; | |
| u.viasamm.offset_sec = viafb_second_offset; | |
| } else { | |
| u.viasamm.size_prim = | |
| viaparinfo->memsize - viaparinfo->fbmem_used; | |
| u.viasamm.size_sec = 0; | |
| u.viasamm.mem_base = viaparinfo->fbmem; | |
| u.viasamm.offset_sec = 0; | |
| } | |
| if (copy_to_user(argp, &u.viasamm, sizeof(u.viasamm))) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_TURN_ON_OUTPUT_DEVICE: | |
| if (copy_from_user(&gpu32, argp, sizeof(gpu32))) | |
| return -EFAULT; | |
| if (gpu32 & CRT_Device) | |
| via_set_state(VIA_CRT, VIA_STATE_ON); | |
| if (gpu32 & DVI_Device) | |
| viafb_dvi_enable(); | |
| if (gpu32 & LCD_Device) | |
| viafb_lcd_enable(); | |
| break; | |
| case VIAFB_TURN_OFF_OUTPUT_DEVICE: | |
| if (copy_from_user(&gpu32, argp, sizeof(gpu32))) | |
| return -EFAULT; | |
| if (gpu32 & CRT_Device) | |
| via_set_state(VIA_CRT, VIA_STATE_OFF); | |
| if (gpu32 & DVI_Device) | |
| viafb_dvi_disable(); | |
| if (gpu32 & LCD_Device) | |
| viafb_lcd_disable(); | |
| break; | |
| case VIAFB_GET_DEVICE: | |
| u.active_dev.crt = viafb_CRT_ON; | |
| u.active_dev.dvi = viafb_DVI_ON; | |
| u.active_dev.lcd = viafb_LCD_ON; | |
| u.active_dev.samm = viafb_SAMM_ON; | |
| u.active_dev.primary_dev = viafb_primary_dev; | |
| u.active_dev.lcd_dsp_cent = viafb_lcd_dsp_method; | |
| u.active_dev.lcd_panel_id = viafb_lcd_panel_id; | |
| u.active_dev.lcd_mode = viafb_lcd_mode; | |
| u.active_dev.xres = viafb_hotplug_Xres; | |
| u.active_dev.yres = viafb_hotplug_Yres; | |
| u.active_dev.xres1 = viafb_second_xres; | |
| u.active_dev.yres1 = viafb_second_yres; | |
| u.active_dev.bpp = viafb_bpp; | |
| u.active_dev.bpp1 = viafb_bpp1; | |
| u.active_dev.refresh = viafb_refresh; | |
| u.active_dev.refresh1 = viafb_refresh1; | |
| u.active_dev.epia_dvi = viafb_platform_epia_dvi; | |
| u.active_dev.lcd_dual_edge = viafb_device_lcd_dualedge; | |
| u.active_dev.bus_width = viafb_bus_width; | |
| if (copy_to_user(argp, &u.active_dev, sizeof(u.active_dev))) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_GET_DRIVER_VERSION: | |
| u.driver_version.iMajorNum = VERSION_MAJOR; | |
| u.driver_version.iKernelNum = VERSION_KERNEL; | |
| u.driver_version.iOSNum = VERSION_OS; | |
| u.driver_version.iMinorNum = VERSION_MINOR; | |
| if (copy_to_user(argp, &u.driver_version, | |
| sizeof(u.driver_version))) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_GET_DEVICE_INFO: | |
| retrieve_device_setting(&u.viafb_setting); | |
| if (copy_to_user(argp, &u.viafb_setting, | |
| sizeof(u.viafb_setting))) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_GET_DEVICE_SUPPORT: | |
| viafb_get_device_support_state(&state_info); | |
| if (put_user(state_info, argp)) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_GET_DEVICE_CONNECT: | |
| viafb_get_device_connect_state(&state_info); | |
| if (put_user(state_info, argp)) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_GET_PANEL_SUPPORT_EXPAND: | |
| state_info = | |
| viafb_lcd_get_support_expand_state(info->var.xres, | |
| info->var.yres); | |
| if (put_user(state_info, argp)) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_GET_DRIVER_NAME: | |
| if (copy_to_user(argp, driver_name, sizeof(driver_name))) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_SET_GAMMA_LUT: | |
| viafb_gamma_table = memdup_user(argp, 256 * sizeof(u32)); | |
| if (IS_ERR(viafb_gamma_table)) | |
| return PTR_ERR(viafb_gamma_table); | |
| viafb_set_gamma_table(viafb_bpp, viafb_gamma_table); | |
| kfree(viafb_gamma_table); | |
| break; | |
| case VIAFB_GET_GAMMA_LUT: | |
| viafb_gamma_table = kmalloc(256 * sizeof(u32), GFP_KERNEL); | |
| if (!viafb_gamma_table) | |
| return -ENOMEM; | |
| viafb_get_gamma_table(viafb_gamma_table); | |
| if (copy_to_user(argp, viafb_gamma_table, | |
| 256 * sizeof(u32))) { | |
| kfree(viafb_gamma_table); | |
| return -EFAULT; | |
| } | |
| kfree(viafb_gamma_table); | |
| break; | |
| case VIAFB_GET_GAMMA_SUPPORT_STATE: | |
| viafb_get_gamma_support_state(viafb_bpp, &state_info); | |
| if (put_user(state_info, argp)) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_SYNC_SURFACE: | |
| DEBUG_MSG(KERN_INFO "lobo VIAFB_SYNC_SURFACE\n"); | |
| break; | |
| case VIAFB_GET_DRIVER_CAPS: | |
| break; | |
| case VIAFB_GET_PANEL_MAX_SIZE: | |
| if (copy_from_user(&u.panel_pos_size_para, argp, | |
| sizeof(u.panel_pos_size_para))) | |
| return -EFAULT; | |
| u.panel_pos_size_para.x = u.panel_pos_size_para.y = 0; | |
| if (copy_to_user(argp, &u.panel_pos_size_para, | |
| sizeof(u.panel_pos_size_para))) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_GET_PANEL_MAX_POSITION: | |
| if (copy_from_user(&u.panel_pos_size_para, argp, | |
| sizeof(u.panel_pos_size_para))) | |
| return -EFAULT; | |
| u.panel_pos_size_para.x = u.panel_pos_size_para.y = 0; | |
| if (copy_to_user(argp, &u.panel_pos_size_para, | |
| sizeof(u.panel_pos_size_para))) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_GET_PANEL_POSITION: | |
| if (copy_from_user(&u.panel_pos_size_para, argp, | |
| sizeof(u.panel_pos_size_para))) | |
| return -EFAULT; | |
| u.panel_pos_size_para.x = u.panel_pos_size_para.y = 0; | |
| if (copy_to_user(argp, &u.panel_pos_size_para, | |
| sizeof(u.panel_pos_size_para))) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_GET_PANEL_SIZE: | |
| if (copy_from_user(&u.panel_pos_size_para, argp, | |
| sizeof(u.panel_pos_size_para))) | |
| return -EFAULT; | |
| u.panel_pos_size_para.x = u.panel_pos_size_para.y = 0; | |
| if (copy_to_user(argp, &u.panel_pos_size_para, | |
| sizeof(u.panel_pos_size_para))) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_SET_PANEL_POSITION: | |
| if (copy_from_user(&u.panel_pos_size_para, argp, | |
| sizeof(u.panel_pos_size_para))) | |
| return -EFAULT; | |
| break; | |
| case VIAFB_SET_PANEL_SIZE: | |
| if (copy_from_user(&u.panel_pos_size_para, argp, | |
| sizeof(u.panel_pos_size_para))) | |
| return -EFAULT; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static void viafb_fillrect(struct fb_info *info, | |
| const struct fb_fillrect *rect) | |
| { | |
| struct viafb_par *viapar = info->par; | |
| struct viafb_shared *shared = viapar->shared; | |
| u32 fg_color; | |
| u8 rop; | |
| if (info->flags & FBINFO_HWACCEL_DISABLED || !shared->hw_bitblt) { | |
| cfb_fillrect(info, rect); | |
| return; | |
| } | |
| if (!rect->width || !rect->height) | |
| return; | |
| if (info->fix.visual == FB_VISUAL_TRUECOLOR) | |
| fg_color = ((u32 *)info->pseudo_palette)[rect->color]; | |
| else | |
| fg_color = rect->color; | |
| if (rect->rop == ROP_XOR) | |
| rop = 0x5A; | |
| else | |
| rop = 0xF0; | |
| DEBUG_MSG(KERN_DEBUG "viafb 2D engine: fillrect\n"); | |
| if (shared->hw_bitblt(shared->vdev->engine_mmio, VIA_BITBLT_FILL, | |
| rect->width, rect->height, info->var.bits_per_pixel, | |
| viapar->vram_addr, info->fix.line_length, rect->dx, rect->dy, | |
| NULL, 0, 0, 0, 0, fg_color, 0, rop)) | |
| cfb_fillrect(info, rect); | |
| } | |
| static void viafb_copyarea(struct fb_info *info, | |
| const struct fb_copyarea *area) | |
| { | |
| struct viafb_par *viapar = info->par; | |
| struct viafb_shared *shared = viapar->shared; | |
| if (info->flags & FBINFO_HWACCEL_DISABLED || !shared->hw_bitblt) { | |
| cfb_copyarea(info, area); | |
| return; | |
| } | |
| if (!area->width || !area->height) | |
| return; | |
| DEBUG_MSG(KERN_DEBUG "viafb 2D engine: copyarea\n"); | |
| if (shared->hw_bitblt(shared->vdev->engine_mmio, VIA_BITBLT_COLOR, | |
| area->width, area->height, info->var.bits_per_pixel, | |
| viapar->vram_addr, info->fix.line_length, area->dx, area->dy, | |
| NULL, viapar->vram_addr, info->fix.line_length, | |
| area->sx, area->sy, 0, 0, 0)) | |
| cfb_copyarea(info, area); | |
| } | |
| static void viafb_imageblit(struct fb_info *info, | |
| const struct fb_image *image) | |
| { | |
| struct viafb_par *viapar = info->par; | |
| struct viafb_shared *shared = viapar->shared; | |
| u32 fg_color = 0, bg_color = 0; | |
| u8 op; | |
| if (info->flags & FBINFO_HWACCEL_DISABLED || !shared->hw_bitblt || | |
| (image->depth != 1 && image->depth != viapar->depth)) { | |
| cfb_imageblit(info, image); | |
| return; | |
| } | |
| if (image->depth == 1) { | |
| op = VIA_BITBLT_MONO; | |
| if (info->fix.visual == FB_VISUAL_TRUECOLOR) { | |
| fg_color = | |
| ((u32 *)info->pseudo_palette)[image->fg_color]; | |
| bg_color = | |
| ((u32 *)info->pseudo_palette)[image->bg_color]; | |
| } else { | |
| fg_color = image->fg_color; | |
| bg_color = image->bg_color; | |
| } | |
| } else | |
| op = VIA_BITBLT_COLOR; | |
| DEBUG_MSG(KERN_DEBUG "viafb 2D engine: imageblit\n"); | |
| if (shared->hw_bitblt(shared->vdev->engine_mmio, op, | |
| image->width, image->height, info->var.bits_per_pixel, | |
| viapar->vram_addr, info->fix.line_length, image->dx, image->dy, | |
| (u32 *)image->data, 0, 0, 0, 0, fg_color, bg_color, 0)) | |
| cfb_imageblit(info, image); | |
| } | |
| static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor) | |
| { | |
| struct viafb_par *viapar = info->par; | |
| void __iomem *engine = viapar->shared->vdev->engine_mmio; | |
| u32 temp, xx, yy, bg_color = 0, fg_color = 0, | |
| chip_name = viapar->shared->chip_info.gfx_chip_name; | |
| int i, j = 0, cur_size = 64; | |
| if (info->flags & FBINFO_HWACCEL_DISABLED || info != viafbinfo) | |
| return -ENODEV; | |
| /* LCD ouput does not support hw cursors (at least on VN896) */ | |
| if ((chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2) || | |
| viafb_LCD_ON) | |
| return -ENODEV; | |
| viafb_show_hw_cursor(info, HW_Cursor_OFF); | |
| if (cursor->set & FB_CUR_SETHOT) { | |
| temp = (cursor->hot.x << 16) + cursor->hot.y; | |
| writel(temp, engine + VIA_REG_CURSOR_ORG); | |
| } | |
| if (cursor->set & FB_CUR_SETPOS) { | |
| yy = cursor->image.dy - info->var.yoffset; | |
| xx = cursor->image.dx - info->var.xoffset; | |
| temp = yy & 0xFFFF; | |
| temp |= (xx << 16); | |
| writel(temp, engine + VIA_REG_CURSOR_POS); | |
| } | |
| if (cursor->image.width <= 32 && cursor->image.height <= 32) | |
| cur_size = 32; | |
| else if (cursor->image.width <= 64 && cursor->image.height <= 64) | |
| cur_size = 64; | |
| else { | |
| printk(KERN_WARNING "viafb_cursor: The cursor is too large " | |
| "%dx%d", cursor->image.width, cursor->image.height); | |
| return -ENXIO; | |
| } | |
| if (cursor->set & FB_CUR_SETSIZE) { | |
| temp = readl(engine + VIA_REG_CURSOR_MODE); | |
| if (cur_size == 32) | |
| temp |= 0x2; | |
| else | |
| temp &= ~0x2; | |
| writel(temp, engine + VIA_REG_CURSOR_MODE); | |
| } | |
| if (cursor->set & FB_CUR_SETCMAP) { | |
| fg_color = cursor->image.fg_color; | |
| bg_color = cursor->image.bg_color; | |
| if (chip_name == UNICHROME_CX700 || | |
| chip_name == UNICHROME_VX800 || | |
| chip_name == UNICHROME_VX855 || | |
| chip_name == UNICHROME_VX900) { | |
| fg_color = | |
| ((info->cmap.red[fg_color] & 0xFFC0) << 14) | | |
| ((info->cmap.green[fg_color] & 0xFFC0) << 4) | | |
| ((info->cmap.blue[fg_color] & 0xFFC0) >> 6); | |
| bg_color = | |
| ((info->cmap.red[bg_color] & 0xFFC0) << 14) | | |
| ((info->cmap.green[bg_color] & 0xFFC0) << 4) | | |
| ((info->cmap.blue[bg_color] & 0xFFC0) >> 6); | |
| } else { | |
| fg_color = | |
| ((info->cmap.red[fg_color] & 0xFF00) << 8) | | |
| (info->cmap.green[fg_color] & 0xFF00) | | |
| ((info->cmap.blue[fg_color] & 0xFF00) >> 8); | |
| bg_color = | |
| ((info->cmap.red[bg_color] & 0xFF00) << 8) | | |
| (info->cmap.green[bg_color] & 0xFF00) | | |
| ((info->cmap.blue[bg_color] & 0xFF00) >> 8); | |
| } | |
| writel(bg_color, engine + VIA_REG_CURSOR_BG); | |
| writel(fg_color, engine + VIA_REG_CURSOR_FG); | |
| } | |
| if (cursor->set & FB_CUR_SETSHAPE) { | |
| struct { | |
| u8 data[CURSOR_SIZE]; | |
| u32 bak[CURSOR_SIZE / 4]; | |
| } *cr_data = kzalloc(sizeof(*cr_data), GFP_ATOMIC); | |
| int size = ((cursor->image.width + 7) >> 3) * | |
| cursor->image.height; | |
| if (!cr_data) | |
| return -ENOMEM; | |
| if (cur_size == 32) { | |
| for (i = 0; i < (CURSOR_SIZE / 4); i++) { | |
| cr_data->bak[i] = 0x0; | |
| cr_data->bak[i + 1] = 0xFFFFFFFF; | |
| i += 1; | |
| } | |
| } else { | |
| for (i = 0; i < (CURSOR_SIZE / 4); i++) { | |
| cr_data->bak[i] = 0x0; | |
| cr_data->bak[i + 1] = 0x0; | |
| cr_data->bak[i + 2] = 0xFFFFFFFF; | |
| cr_data->bak[i + 3] = 0xFFFFFFFF; | |
| i += 3; | |
| } | |
| } | |
| switch (cursor->rop) { | |
| case ROP_XOR: | |
| for (i = 0; i < size; i++) | |
| cr_data->data[i] = cursor->mask[i]; | |
| break; | |
| case ROP_COPY: | |
| for (i = 0; i < size; i++) | |
| cr_data->data[i] = cursor->mask[i]; | |
| break; | |
| default: | |
| break; | |
| } | |
| if (cur_size == 32) { | |
| for (i = 0; i < size; i++) { | |
| cr_data->bak[j] = (u32) cr_data->data[i]; | |
| cr_data->bak[j + 1] = ~cr_data->bak[j]; | |
| j += 2; | |
| } | |
| } else { | |
| for (i = 0; i < size; i++) { | |
| cr_data->bak[j] = (u32) cr_data->data[i]; | |
| cr_data->bak[j + 1] = 0x0; | |
| cr_data->bak[j + 2] = ~cr_data->bak[j]; | |
| cr_data->bak[j + 3] = ~cr_data->bak[j + 1]; | |
| j += 4; | |
| } | |
| } | |
| memcpy_toio(viafbinfo->screen_base + viapar->shared-> | |
| cursor_vram_addr, cr_data->bak, CURSOR_SIZE); | |
| kfree(cr_data); | |
| } | |
| if (cursor->enable) | |
| viafb_show_hw_cursor(info, HW_Cursor_ON); | |
| return 0; | |
| } | |
| static int viafb_sync(struct fb_info *info) | |
| { | |
| if (!(info->flags & FBINFO_HWACCEL_DISABLED)) | |
| viafb_wait_engine_idle(info); | |
| return 0; | |
| } | |
| static int get_primary_device(void) | |
| { | |
| int primary_device = 0; | |
| /* Rule: device on iga1 path are the primary device. */ | |
| if (viafb_SAMM_ON) { | |
| if (viafb_CRT_ON) { | |
| if (viaparinfo->shared->iga1_devices & VIA_CRT) { | |
| DEBUG_MSG(KERN_INFO "CRT IGA Path:%d\n", IGA1); | |
| primary_device = CRT_Device; | |
| } | |
| } | |
| if (viafb_DVI_ON) { | |
| if (viaparinfo->tmds_setting_info->iga_path == IGA1) { | |
| DEBUG_MSG(KERN_INFO "DVI IGA Path:%d\n", | |
| viaparinfo-> | |
| tmds_setting_info->iga_path); | |
| primary_device = DVI_Device; | |
| } | |
| } | |
| if (viafb_LCD_ON) { | |
| if (viaparinfo->lvds_setting_info->iga_path == IGA1) { | |
| DEBUG_MSG(KERN_INFO "LCD IGA Path:%d\n", | |
| viaparinfo-> | |
| lvds_setting_info->iga_path); | |
| primary_device = LCD_Device; | |
| } | |
| } | |
| if (viafb_LCD2_ON) { | |
| if (viaparinfo->lvds_setting_info2->iga_path == IGA1) { | |
| DEBUG_MSG(KERN_INFO "LCD2 IGA Path:%d\n", | |
| viaparinfo-> | |
| lvds_setting_info2->iga_path); | |
| primary_device = LCD2_Device; | |
| } | |
| } | |
| } | |
| return primary_device; | |
| } | |
| static void retrieve_device_setting(struct viafb_ioctl_setting | |
| *setting_info) | |
| { | |
| /* get device status */ | |
| if (viafb_CRT_ON == 1) | |
| setting_info->device_status = CRT_Device; | |
| if (viafb_DVI_ON == 1) | |
| setting_info->device_status |= DVI_Device; | |
| if (viafb_LCD_ON == 1) | |
| setting_info->device_status |= LCD_Device; | |
| if (viafb_LCD2_ON == 1) | |
| setting_info->device_status |= LCD2_Device; | |
| setting_info->samm_status = viafb_SAMM_ON; | |
| setting_info->primary_device = get_primary_device(); | |
| setting_info->first_dev_bpp = viafb_bpp; | |
| setting_info->second_dev_bpp = viafb_bpp1; | |
| setting_info->first_dev_refresh = viafb_refresh; | |
| setting_info->second_dev_refresh = viafb_refresh1; | |
| setting_info->first_dev_hor_res = viafb_hotplug_Xres; | |
| setting_info->first_dev_ver_res = viafb_hotplug_Yres; | |
| setting_info->second_dev_hor_res = viafb_second_xres; | |
| setting_info->second_dev_ver_res = viafb_second_yres; | |
| /* Get lcd attributes */ | |
| setting_info->lcd_attributes.display_center = viafb_lcd_dsp_method; | |
| setting_info->lcd_attributes.panel_id = viafb_lcd_panel_id; | |
| setting_info->lcd_attributes.lcd_mode = viafb_lcd_mode; | |
| } | |
| static int __init parse_active_dev(void) | |
| { | |
| viafb_CRT_ON = STATE_OFF; | |
| viafb_DVI_ON = STATE_OFF; | |
| viafb_LCD_ON = STATE_OFF; | |
| viafb_LCD2_ON = STATE_OFF; | |
| /* 1. Modify the active status of devices. */ | |
| /* 2. Keep the order of devices, so we can set corresponding | |
| IGA path to devices in SAMM case. */ | |
| /* Note: The previous of active_dev is primary device, | |
| and the following is secondary device. */ | |
| if (!viafb_active_dev) { | |
| if (machine_is_olpc()) { /* LCD only */ | |
| viafb_LCD_ON = STATE_ON; | |
| viafb_SAMM_ON = STATE_OFF; | |
| } else { | |
| viafb_CRT_ON = STATE_ON; | |
| viafb_SAMM_ON = STATE_OFF; | |
| } | |
| } else if (!strcmp(viafb_active_dev, "CRT+DVI")) { | |
| /* CRT+DVI */ | |
| viafb_CRT_ON = STATE_ON; | |
| viafb_DVI_ON = STATE_ON; | |
| viafb_primary_dev = CRT_Device; | |
| } else if (!strcmp(viafb_active_dev, "DVI+CRT")) { | |
| /* DVI+CRT */ | |
| viafb_CRT_ON = STATE_ON; | |
| viafb_DVI_ON = STATE_ON; | |
| viafb_primary_dev = DVI_Device; | |
| } else if (!strcmp(viafb_active_dev, "CRT+LCD")) { | |
| /* CRT+LCD */ | |
| viafb_CRT_ON = STATE_ON; | |
| viafb_LCD_ON = STATE_ON; | |
| viafb_primary_dev = CRT_Device; | |
| } else if (!strcmp(viafb_active_dev, "LCD+CRT")) { | |
| /* LCD+CRT */ | |
| viafb_CRT_ON = STATE_ON; | |
| viafb_LCD_ON = STATE_ON; | |
| viafb_primary_dev = LCD_Device; | |
| } else if (!strcmp(viafb_active_dev, "DVI+LCD")) { | |
| /* DVI+LCD */ | |
| viafb_DVI_ON = STATE_ON; | |
| viafb_LCD_ON = STATE_ON; | |
| viafb_primary_dev = DVI_Device; | |
| } else if (!strcmp(viafb_active_dev, "LCD+DVI")) { | |
| /* LCD+DVI */ | |
| viafb_DVI_ON = STATE_ON; | |
| viafb_LCD_ON = STATE_ON; | |
| viafb_primary_dev = LCD_Device; | |
| } else if (!strcmp(viafb_active_dev, "LCD+LCD2")) { | |
| viafb_LCD_ON = STATE_ON; | |
| viafb_LCD2_ON = STATE_ON; | |
| viafb_primary_dev = LCD_Device; | |
| } else if (!strcmp(viafb_active_dev, "LCD2+LCD")) { | |
| viafb_LCD_ON = STATE_ON; | |
| viafb_LCD2_ON = STATE_ON; | |
| viafb_primary_dev = LCD2_Device; | |
| } else if (!strcmp(viafb_active_dev, "CRT")) { | |
| /* CRT only */ | |
| viafb_CRT_ON = STATE_ON; | |
| viafb_SAMM_ON = STATE_OFF; | |
| } else if (!strcmp(viafb_active_dev, "DVI")) { | |
| /* DVI only */ | |
| viafb_DVI_ON = STATE_ON; | |
| viafb_SAMM_ON = STATE_OFF; | |
| } else if (!strcmp(viafb_active_dev, "LCD")) { | |
| /* LCD only */ | |
| viafb_LCD_ON = STATE_ON; | |
| viafb_SAMM_ON = STATE_OFF; | |
| } else | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int parse_port(char *opt_str, int *output_interface) | |
| { | |
| if (!strncmp(opt_str, "DVP0", 4)) | |
| *output_interface = INTERFACE_DVP0; | |
| else if (!strncmp(opt_str, "DVP1", 4)) | |
| *output_interface = INTERFACE_DVP1; | |
| else if (!strncmp(opt_str, "DFP_HIGHLOW", 11)) | |
| *output_interface = INTERFACE_DFP; | |
| else if (!strncmp(opt_str, "DFP_HIGH", 8)) | |
| *output_interface = INTERFACE_DFP_HIGH; | |
| else if (!strncmp(opt_str, "DFP_LOW", 7)) | |
| *output_interface = INTERFACE_DFP_LOW; | |
| else | |
| *output_interface = INTERFACE_NONE; | |
| return 0; | |
| } | |
| static void parse_lcd_port(void) | |
| { | |
| parse_port(viafb_lcd_port, &viaparinfo->chip_info->lvds_chip_info. | |
| output_interface); | |
| /*Initialize to avoid unexpected behavior */ | |
| viaparinfo->chip_info->lvds_chip_info2.output_interface = | |
| INTERFACE_NONE; | |
| DEBUG_MSG(KERN_INFO "parse_lcd_port: viafb_lcd_port:%s,interface:%d\n", | |
| viafb_lcd_port, viaparinfo->chip_info->lvds_chip_info. | |
| output_interface); | |
| } | |
| static void parse_dvi_port(void) | |
| { | |
| parse_port(viafb_dvi_port, &viaparinfo->chip_info->tmds_chip_info. | |
| output_interface); | |
| DEBUG_MSG(KERN_INFO "parse_dvi_port: viafb_dvi_port:%s,interface:%d\n", | |
| viafb_dvi_port, viaparinfo->chip_info->tmds_chip_info. | |
| output_interface); | |
| } | |
| #ifdef CONFIG_FB_VIA_DIRECT_PROCFS | |
| /* | |
| * The proc filesystem read/write function, a simple proc implement to | |
| * get/set the value of DPA DVP0, DVP0DataDriving, DVP0ClockDriving, DVP1, | |
| * DVP1Driving, DFPHigh, DFPLow CR96, SR2A[5], SR1B[1], SR2A[4], SR1E[2], | |
| * CR9B, SR65, CR97, CR99 | |
| */ | |
| static int viafb_dvp0_proc_show(struct seq_file *m, void *v) | |
| { | |
| u8 dvp0_data_dri = 0, dvp0_clk_dri = 0, dvp0 = 0; | |
| dvp0_data_dri = | |
| (viafb_read_reg(VIASR, SR2A) & BIT5) >> 4 | | |
| (viafb_read_reg(VIASR, SR1B) & BIT1) >> 1; | |
| dvp0_clk_dri = | |
| (viafb_read_reg(VIASR, SR2A) & BIT4) >> 3 | | |
| (viafb_read_reg(VIASR, SR1E) & BIT2) >> 2; | |
| dvp0 = viafb_read_reg(VIACR, CR96) & 0x0f; | |
| seq_printf(m, "%x %x %x\n", dvp0, dvp0_data_dri, dvp0_clk_dri); | |
| return 0; | |
| } | |
| static int viafb_dvp0_proc_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, viafb_dvp0_proc_show, NULL); | |
| } | |
| static ssize_t viafb_dvp0_proc_write(struct file *file, | |
| const char __user *buffer, size_t count, loff_t *pos) | |
| { | |
| char buf[20], *value, *pbuf; | |
| u8 reg_val = 0; | |
| unsigned long length, i; | |
| if (count < 1) | |
| return -EINVAL; | |
| length = count > 20 ? 20 : count; | |
| if (copy_from_user(&buf[0], buffer, length)) | |
| return -EFAULT; | |
| buf[length - 1] = '\0'; /*Ensure end string */ | |
| pbuf = &buf[0]; | |
| for (i = 0; i < 3; i++) { | |
| value = strsep(&pbuf, " "); | |
| if (value != NULL) { | |
| if (kstrtou8(value, 0, ®_val) < 0) | |
| return -EINVAL; | |
| DEBUG_MSG(KERN_INFO "DVP0:reg_val[%l]=:%x\n", i, | |
| reg_val); | |
| switch (i) { | |
| case 0: | |
| viafb_write_reg_mask(CR96, VIACR, | |
| reg_val, 0x0f); | |
| break; | |
| case 1: | |
| viafb_write_reg_mask(SR2A, VIASR, | |
| reg_val << 4, BIT5); | |
| viafb_write_reg_mask(SR1B, VIASR, | |
| reg_val << 1, BIT1); | |
| break; | |
| case 2: | |
| viafb_write_reg_mask(SR2A, VIASR, | |
| reg_val << 3, BIT4); | |
| viafb_write_reg_mask(SR1E, VIASR, | |
| reg_val << 2, BIT2); | |
| break; | |
| default: | |
| break; | |
| } | |
| } else { | |
| break; | |
| } | |
| } | |
| return count; | |
| } | |
| static const struct file_operations viafb_dvp0_proc_fops = { | |
| .owner = THIS_MODULE, | |
| .open = viafb_dvp0_proc_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| .write = viafb_dvp0_proc_write, | |
| }; | |
| static int viafb_dvp1_proc_show(struct seq_file *m, void *v) | |
| { | |
| u8 dvp1 = 0, dvp1_data_dri = 0, dvp1_clk_dri = 0; | |
| dvp1 = viafb_read_reg(VIACR, CR9B) & 0x0f; | |
| dvp1_data_dri = (viafb_read_reg(VIASR, SR65) & 0x0c) >> 2; | |
| dvp1_clk_dri = viafb_read_reg(VIASR, SR65) & 0x03; | |
| seq_printf(m, "%x %x %x\n", dvp1, dvp1_data_dri, dvp1_clk_dri); | |
| return 0; | |
| } | |
| static int viafb_dvp1_proc_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, viafb_dvp1_proc_show, NULL); | |
| } | |
| static ssize_t viafb_dvp1_proc_write(struct file *file, | |
| const char __user *buffer, size_t count, loff_t *pos) | |
| { | |
| char buf[20], *value, *pbuf; | |
| u8 reg_val = 0; | |
| unsigned long length, i; | |
| if (count < 1) | |
| return -EINVAL; | |
| length = count > 20 ? 20 : count; | |
| if (copy_from_user(&buf[0], buffer, length)) | |
| return -EFAULT; | |
| buf[length - 1] = '\0'; /*Ensure end string */ | |
| pbuf = &buf[0]; | |
| for (i = 0; i < 3; i++) { | |
| value = strsep(&pbuf, " "); | |
| if (value != NULL) { | |
| if (kstrtou8(value, 0, ®_val) < 0) | |
| return -EINVAL; | |
| switch (i) { | |
| case 0: | |
| viafb_write_reg_mask(CR9B, VIACR, | |
| reg_val, 0x0f); | |
| break; | |
| case 1: | |
| viafb_write_reg_mask(SR65, VIASR, | |
| reg_val << 2, 0x0c); | |
| break; | |
| case 2: | |
| viafb_write_reg_mask(SR65, VIASR, | |
| reg_val, 0x03); | |
| break; | |
| default: | |
| break; | |
| } | |
| } else { | |
| break; | |
| } | |
| } | |
| return count; | |
| } | |
| static const struct file_operations viafb_dvp1_proc_fops = { | |
| .owner = THIS_MODULE, | |
| .open = viafb_dvp1_proc_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| .write = viafb_dvp1_proc_write, | |
| }; | |
| static int viafb_dfph_proc_show(struct seq_file *m, void *v) | |
| { | |
| u8 dfp_high = 0; | |
| dfp_high = viafb_read_reg(VIACR, CR97) & 0x0f; | |
| seq_printf(m, "%x\n", dfp_high); | |
| return 0; | |
| } | |
| static int viafb_dfph_proc_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, viafb_dfph_proc_show, NULL); | |
| } | |
| static ssize_t viafb_dfph_proc_write(struct file *file, | |
| const char __user *buffer, size_t count, loff_t *pos) | |
| { | |
| int err; | |
| u8 reg_val; | |
| err = kstrtou8_from_user(buffer, count, 0, ®_val); | |
| if (err) | |
| return err; | |
| viafb_write_reg_mask(CR97, VIACR, reg_val, 0x0f); | |
| return count; | |
| } | |
| static const struct file_operations viafb_dfph_proc_fops = { | |
| .owner = THIS_MODULE, | |
| .open = viafb_dfph_proc_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| .write = viafb_dfph_proc_write, | |
| }; | |
| static int viafb_dfpl_proc_show(struct seq_file *m, void *v) | |
| { | |
| u8 dfp_low = 0; | |
| dfp_low = viafb_read_reg(VIACR, CR99) & 0x0f; | |
| seq_printf(m, "%x\n", dfp_low); | |
| return 0; | |
| } | |
| static int viafb_dfpl_proc_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, viafb_dfpl_proc_show, NULL); | |
| } | |
| static ssize_t viafb_dfpl_proc_write(struct file *file, | |
| const char __user *buffer, size_t count, loff_t *pos) | |
| { | |
| int err; | |
| u8 reg_val; | |
| err = kstrtou8_from_user(buffer, count, 0, ®_val); | |
| if (err) | |
| return err; | |
| viafb_write_reg_mask(CR99, VIACR, reg_val, 0x0f); | |
| return count; | |
| } | |
| static const struct file_operations viafb_dfpl_proc_fops = { | |
| .owner = THIS_MODULE, | |
| .open = viafb_dfpl_proc_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| .write = viafb_dfpl_proc_write, | |
| }; | |
| static int viafb_vt1636_proc_show(struct seq_file *m, void *v) | |
| { | |
| u8 vt1636_08 = 0, vt1636_09 = 0; | |
| switch (viaparinfo->chip_info->lvds_chip_info.lvds_chip_name) { | |
| case VT1636_LVDS: | |
| vt1636_08 = | |
| viafb_gpio_i2c_read_lvds(viaparinfo->lvds_setting_info, | |
| &viaparinfo->chip_info->lvds_chip_info, 0x08) & 0x0f; | |
| vt1636_09 = | |
| viafb_gpio_i2c_read_lvds(viaparinfo->lvds_setting_info, | |
| &viaparinfo->chip_info->lvds_chip_info, 0x09) & 0x1f; | |
| seq_printf(m, "%x %x\n", vt1636_08, vt1636_09); | |
| break; | |
| default: | |
| break; | |
| } | |
| switch (viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name) { | |
| case VT1636_LVDS: | |
| vt1636_08 = | |
| viafb_gpio_i2c_read_lvds(viaparinfo->lvds_setting_info2, | |
| &viaparinfo->chip_info->lvds_chip_info2, 0x08) & 0x0f; | |
| vt1636_09 = | |
| viafb_gpio_i2c_read_lvds(viaparinfo->lvds_setting_info2, | |
| &viaparinfo->chip_info->lvds_chip_info2, 0x09) & 0x1f; | |
| seq_printf(m, " %x %x\n", vt1636_08, vt1636_09); | |
| break; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int viafb_vt1636_proc_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, viafb_vt1636_proc_show, NULL); | |
| } | |
| static ssize_t viafb_vt1636_proc_write(struct file *file, | |
| const char __user *buffer, size_t count, loff_t *pos) | |
| { | |
| char buf[30], *value, *pbuf; | |
| struct IODATA reg_val; | |
| unsigned long length, i; | |
| if (count < 1) | |
| return -EINVAL; | |
| length = count > 30 ? 30 : count; | |
| if (copy_from_user(&buf[0], buffer, length)) | |
| return -EFAULT; | |
| buf[length - 1] = '\0'; /*Ensure end string */ | |
| pbuf = &buf[0]; | |
| switch (viaparinfo->chip_info->lvds_chip_info.lvds_chip_name) { | |
| case VT1636_LVDS: | |
| for (i = 0; i < 2; i++) { | |
| value = strsep(&pbuf, " "); | |
| if (value != NULL) { | |
| if (kstrtou8(value, 0, ®_val.Data) < 0) | |
| return -EINVAL; | |
| switch (i) { | |
| case 0: | |
| reg_val.Index = 0x08; | |
| reg_val.Mask = 0x0f; | |
| viafb_gpio_i2c_write_mask_lvds | |
| (viaparinfo->lvds_setting_info, | |
| &viaparinfo-> | |
| chip_info->lvds_chip_info, | |
| reg_val); | |
| break; | |
| case 1: | |
| reg_val.Index = 0x09; | |
| reg_val.Mask = 0x1f; | |
| viafb_gpio_i2c_write_mask_lvds | |
| (viaparinfo->lvds_setting_info, | |
| &viaparinfo-> | |
| chip_info->lvds_chip_info, | |
| reg_val); | |
| break; | |
| default: | |
| break; | |
| } | |
| } else { | |
| break; | |
| } | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| switch (viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name) { | |
| case VT1636_LVDS: | |
| for (i = 0; i < 2; i++) { | |
| value = strsep(&pbuf, " "); | |
| if (value != NULL) { | |
| if (kstrtou8(value, 0, ®_val.Data) < 0) | |
| return -EINVAL; | |
| switch (i) { | |
| case 0: | |
| reg_val.Index = 0x08; | |
| reg_val.Mask = 0x0f; | |
| viafb_gpio_i2c_write_mask_lvds | |
| (viaparinfo->lvds_setting_info2, | |
| &viaparinfo-> | |
| chip_info->lvds_chip_info2, | |
| reg_val); | |
| break; | |
| case 1: | |
| reg_val.Index = 0x09; | |
| reg_val.Mask = 0x1f; | |
| viafb_gpio_i2c_write_mask_lvds | |
| (viaparinfo->lvds_setting_info2, | |
| &viaparinfo-> | |
| chip_info->lvds_chip_info2, | |
| reg_val); | |
| break; | |
| default: | |
| break; | |
| } | |
| } else { | |
| break; | |
| } | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| return count; | |
| } | |
| static const struct file_operations viafb_vt1636_proc_fops = { | |
| .owner = THIS_MODULE, | |
| .open = viafb_vt1636_proc_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| .write = viafb_vt1636_proc_write, | |
| }; | |
| #endif /* CONFIG_FB_VIA_DIRECT_PROCFS */ | |
| static int __maybe_unused viafb_sup_odev_proc_show(struct seq_file *m, void *v) | |
| { | |
| via_odev_to_seq(m, supported_odev_map[ | |
| viaparinfo->shared->chip_info.gfx_chip_name]); | |
| return 0; | |
| } | |
| static int viafb_sup_odev_proc_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, viafb_sup_odev_proc_show, NULL); | |
| } | |
| static const struct file_operations viafb_sup_odev_proc_fops = { | |
| .owner = THIS_MODULE, | |
| .open = viafb_sup_odev_proc_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| }; | |
| static ssize_t odev_update(const char __user *buffer, size_t count, u32 *odev) | |
| { | |
| char buf[64], *ptr = buf; | |
| u32 devices; | |
| bool add, sub; | |
| if (count < 1 || count > 63) | |
| return -EINVAL; | |
| if (copy_from_user(&buf[0], buffer, count)) | |
| return -EFAULT; | |
| buf[count] = '\0'; | |
| add = buf[0] == '+'; | |
| sub = buf[0] == '-'; | |
| if (add || sub) | |
| ptr++; | |
| devices = via_parse_odev(ptr, &ptr); | |
| if (*ptr == '\n') | |
| ptr++; | |
| if (*ptr != 0) | |
| return -EINVAL; | |
| if (add) | |
| *odev |= devices; | |
| else if (sub) | |
| *odev &= ~devices; | |
| else | |
| *odev = devices; | |
| return count; | |
| } | |
| static int viafb_iga1_odev_proc_show(struct seq_file *m, void *v) | |
| { | |
| via_odev_to_seq(m, viaparinfo->shared->iga1_devices); | |
| return 0; | |
| } | |
| static int viafb_iga1_odev_proc_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, viafb_iga1_odev_proc_show, NULL); | |
| } | |
| static ssize_t viafb_iga1_odev_proc_write(struct file *file, | |
| const char __user *buffer, size_t count, loff_t *pos) | |
| { | |
| u32 dev_on, dev_off, dev_old, dev_new; | |
| ssize_t res; | |
| dev_old = dev_new = viaparinfo->shared->iga1_devices; | |
| res = odev_update(buffer, count, &dev_new); | |
| if (res != count) | |
| return res; | |
| dev_off = dev_old & ~dev_new; | |
| dev_on = dev_new & ~dev_old; | |
| viaparinfo->shared->iga1_devices = dev_new; | |
| viaparinfo->shared->iga2_devices &= ~dev_new; | |
| via_set_state(dev_off, VIA_STATE_OFF); | |
| via_set_source(dev_new, IGA1); | |
| via_set_state(dev_on, VIA_STATE_ON); | |
| return res; | |
| } | |
| static const struct file_operations viafb_iga1_odev_proc_fops = { | |
| .owner = THIS_MODULE, | |
| .open = viafb_iga1_odev_proc_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| .write = viafb_iga1_odev_proc_write, | |
| }; | |
| static int viafb_iga2_odev_proc_show(struct seq_file *m, void *v) | |
| { | |
| via_odev_to_seq(m, viaparinfo->shared->iga2_devices); | |
| return 0; | |
| } | |
| static int viafb_iga2_odev_proc_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, viafb_iga2_odev_proc_show, NULL); | |
| } | |
| static ssize_t viafb_iga2_odev_proc_write(struct file *file, | |
| const char __user *buffer, size_t count, loff_t *pos) | |
| { | |
| u32 dev_on, dev_off, dev_old, dev_new; | |
| ssize_t res; | |
| dev_old = dev_new = viaparinfo->shared->iga2_devices; | |
| res = odev_update(buffer, count, &dev_new); | |
| if (res != count) | |
| return res; | |
| dev_off = dev_old & ~dev_new; | |
| dev_on = dev_new & ~dev_old; | |
| viaparinfo->shared->iga2_devices = dev_new; | |
| viaparinfo->shared->iga1_devices &= ~dev_new; | |
| via_set_state(dev_off, VIA_STATE_OFF); | |
| via_set_source(dev_new, IGA2); | |
| via_set_state(dev_on, VIA_STATE_ON); | |
| return res; | |
| } | |
| static const struct file_operations viafb_iga2_odev_proc_fops = { | |
| .owner = THIS_MODULE, | |
| .open = viafb_iga2_odev_proc_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| .write = viafb_iga2_odev_proc_write, | |
| }; | |
| #define IS_VT1636(lvds_chip) ((lvds_chip).lvds_chip_name == VT1636_LVDS) | |
| static void viafb_init_proc(struct viafb_shared *shared) | |
| { | |
| struct proc_dir_entry *iga1_entry, *iga2_entry, | |
| *viafb_entry = proc_mkdir("viafb", NULL); | |
| shared->proc_entry = viafb_entry; | |
| if (viafb_entry) { | |
| #ifdef CONFIG_FB_VIA_DIRECT_PROCFS | |
| proc_create("dvp0", 0, viafb_entry, &viafb_dvp0_proc_fops); | |
| proc_create("dvp1", 0, viafb_entry, &viafb_dvp1_proc_fops); | |
| proc_create("dfph", 0, viafb_entry, &viafb_dfph_proc_fops); | |
| proc_create("dfpl", 0, viafb_entry, &viafb_dfpl_proc_fops); | |
| if (IS_VT1636(shared->chip_info.lvds_chip_info) | |
| || IS_VT1636(shared->chip_info.lvds_chip_info2)) | |
| proc_create("vt1636", 0, viafb_entry, | |
| &viafb_vt1636_proc_fops); | |
| #endif /* CONFIG_FB_VIA_DIRECT_PROCFS */ | |
| proc_create("supported_output_devices", 0, viafb_entry, | |
| &viafb_sup_odev_proc_fops); | |
| iga1_entry = proc_mkdir("iga1", viafb_entry); | |
| shared->iga1_proc_entry = iga1_entry; | |
| proc_create("output_devices", 0, iga1_entry, | |
| &viafb_iga1_odev_proc_fops); | |
| iga2_entry = proc_mkdir("iga2", viafb_entry); | |
| shared->iga2_proc_entry = iga2_entry; | |
| proc_create("output_devices", 0, iga2_entry, | |
| &viafb_iga2_odev_proc_fops); | |
| } | |
| } | |
| static void viafb_remove_proc(struct viafb_shared *shared) | |
| { | |
| struct proc_dir_entry *viafb_entry = shared->proc_entry; | |
| if (!viafb_entry) | |
| return; | |
| remove_proc_entry("output_devices", shared->iga2_proc_entry); | |
| remove_proc_entry("iga2", viafb_entry); | |
| remove_proc_entry("output_devices", shared->iga1_proc_entry); | |
| remove_proc_entry("iga1", viafb_entry); | |
| remove_proc_entry("supported_output_devices", viafb_entry); | |
| #ifdef CONFIG_FB_VIA_DIRECT_PROCFS | |
| remove_proc_entry("dvp0", viafb_entry);/* parent dir */ | |
| remove_proc_entry("dvp1", viafb_entry); | |
| remove_proc_entry("dfph", viafb_entry); | |
| remove_proc_entry("dfpl", viafb_entry); | |
| if (IS_VT1636(shared->chip_info.lvds_chip_info) | |
| || IS_VT1636(shared->chip_info.lvds_chip_info2)) | |
| remove_proc_entry("vt1636", viafb_entry); | |
| #endif /* CONFIG_FB_VIA_DIRECT_PROCFS */ | |
| remove_proc_entry("viafb", NULL); | |
| } | |
| #undef IS_VT1636 | |
| static int parse_mode(const char *str, u32 devices, u32 *xres, u32 *yres) | |
| { | |
| const struct fb_videomode *mode = NULL; | |
| char *ptr; | |
| if (!str) { | |
| if (devices == VIA_CRT) | |
| mode = via_aux_get_preferred_mode( | |
| viaparinfo->shared->i2c_26); | |
| else if (devices == VIA_DVP1) | |
| mode = via_aux_get_preferred_mode( | |
| viaparinfo->shared->i2c_31); | |
| if (mode) { | |
| *xres = mode->xres; | |
| *yres = mode->yres; | |
| } else if (machine_is_olpc()) { | |
| *xres = 1200; | |
| *yres = 900; | |
| } else { | |
| *xres = 640; | |
| *yres = 480; | |
| } | |
| return 0; | |
| } | |
| *xres = simple_strtoul(str, &ptr, 10); | |
| if (ptr[0] != 'x') | |
| return -EINVAL; | |
| *yres = simple_strtoul(&ptr[1], &ptr, 10); | |
| if (ptr[0]) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int viafb_suspend(void *unused) | |
| { | |
| console_lock(); | |
| fb_set_suspend(viafbinfo, 1); | |
| viafb_sync(viafbinfo); | |
| console_unlock(); | |
| return 0; | |
| } | |
| static int viafb_resume(void *unused) | |
| { | |
| console_lock(); | |
| if (viaparinfo->shared->vdev->engine_mmio) | |
| viafb_reset_engine(viaparinfo); | |
| viafb_set_par(viafbinfo); | |
| if (viafb_dual_fb) | |
| viafb_set_par(viafbinfo1); | |
| fb_set_suspend(viafbinfo, 0); | |
| console_unlock(); | |
| return 0; | |
| } | |
| static struct viafb_pm_hooks viafb_fb_pm_hooks = { | |
| .suspend = viafb_suspend, | |
| .resume = viafb_resume | |
| }; | |
| #endif | |
| static void i2c_bus_probe(struct viafb_shared *shared) | |
| { | |
| /* should be always CRT */ | |
| printk(KERN_INFO "viafb: Probing I2C bus 0x26\n"); | |
| shared->i2c_26 = via_aux_probe(viafb_find_i2c_adapter(VIA_PORT_26)); | |
| /* seems to be usually DVP1 */ | |
| printk(KERN_INFO "viafb: Probing I2C bus 0x31\n"); | |
| shared->i2c_31 = via_aux_probe(viafb_find_i2c_adapter(VIA_PORT_31)); | |
| /* FIXME: what is this? */ | |
| if (!machine_is_olpc()) { | |
| printk(KERN_INFO "viafb: Probing I2C bus 0x2C\n"); | |
| shared->i2c_2C = via_aux_probe(viafb_find_i2c_adapter(VIA_PORT_2C)); | |
| } | |
| printk(KERN_INFO "viafb: Finished I2C bus probing"); | |
| } | |
| static void i2c_bus_free(struct viafb_shared *shared) | |
| { | |
| via_aux_free(shared->i2c_26); | |
| via_aux_free(shared->i2c_31); | |
| via_aux_free(shared->i2c_2C); | |
| } | |
| int via_fb_pci_probe(struct viafb_dev *vdev) | |
| { | |
| u32 default_xres, default_yres; | |
| struct fb_var_screeninfo default_var; | |
| int rc; | |
| u32 viafb_par_length; | |
| DEBUG_MSG(KERN_INFO "VIAFB PCI Probe!!\n"); | |
| memset(&default_var, 0, sizeof(default_var)); | |
| viafb_par_length = ALIGN(sizeof(struct viafb_par), BITS_PER_LONG/8); | |
| /* Allocate fb_info and ***_par here, also including some other needed | |
| * variables | |
| */ | |
| viafbinfo = framebuffer_alloc(viafb_par_length + | |
| ALIGN(sizeof(struct viafb_shared), BITS_PER_LONG/8), | |
| &vdev->pdev->dev); | |
| if (!viafbinfo) { | |
| printk(KERN_ERR"Could not allocate memory for viafb_info.\n"); | |
| return -ENOMEM; | |
| } | |
| viaparinfo = (struct viafb_par *)viafbinfo->par; | |
| viaparinfo->shared = viafbinfo->par + viafb_par_length; | |
| viaparinfo->shared->vdev = vdev; | |
| viaparinfo->vram_addr = 0; | |
| viaparinfo->tmds_setting_info = &viaparinfo->shared->tmds_setting_info; | |
| viaparinfo->lvds_setting_info = &viaparinfo->shared->lvds_setting_info; | |
| viaparinfo->lvds_setting_info2 = | |
| &viaparinfo->shared->lvds_setting_info2; | |
| viaparinfo->chip_info = &viaparinfo->shared->chip_info; | |
| i2c_bus_probe(viaparinfo->shared); | |
| if (viafb_dual_fb) | |
| viafb_SAMM_ON = 1; | |
| parse_lcd_port(); | |
| parse_dvi_port(); | |
| viafb_init_chip_info(vdev->chip_type); | |
| /* | |
| * The framebuffer will have been successfully mapped by | |
| * the core (or we'd not be here), but we still need to | |
| * set up our own accounting. | |
| */ | |
| viaparinfo->fbmem = vdev->fbmem_start; | |
| viaparinfo->memsize = vdev->fbmem_len; | |
| viaparinfo->fbmem_free = viaparinfo->memsize; | |
| viaparinfo->fbmem_used = 0; | |
| viafbinfo->screen_base = vdev->fbmem; | |
| viafbinfo->fix.mmio_start = vdev->engine_start; | |
| viafbinfo->fix.mmio_len = vdev->engine_len; | |
| viafbinfo->node = 0; | |
| viafbinfo->fbops = &viafb_ops; | |
| viafbinfo->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; | |
| viafbinfo->pseudo_palette = pseudo_pal; | |
| if (viafb_accel && !viafb_setup_engine(viafbinfo)) { | |
| viafbinfo->flags |= FBINFO_HWACCEL_COPYAREA | | |
| FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_IMAGEBLIT; | |
| default_var.accel_flags = FB_ACCELF_TEXT; | |
| } else { | |
| viafbinfo->flags |= FBINFO_HWACCEL_DISABLED; | |
| default_var.accel_flags = 0; | |
| } | |
| if (viafb_second_size && (viafb_second_size < 8)) { | |
| viafb_second_offset = viaparinfo->fbmem_free - | |
| viafb_second_size * 1024 * 1024; | |
| } else { | |
| viafb_second_size = 8; | |
| viafb_second_offset = viaparinfo->fbmem_free - | |
| viafb_second_size * 1024 * 1024; | |
| } | |
| parse_mode(viafb_mode, viaparinfo->shared->iga1_devices, | |
| &default_xres, &default_yres); | |
| if (viafb_SAMM_ON == 1) | |
| parse_mode(viafb_mode1, viaparinfo->shared->iga2_devices, | |
| &viafb_second_xres, &viafb_second_yres); | |
| default_var.xres = default_xres; | |
| default_var.yres = default_yres; | |
| default_var.xres_virtual = default_xres; | |
| default_var.yres_virtual = default_yres; | |
| default_var.bits_per_pixel = viafb_bpp; | |
| viafb_fill_var_timing_info(&default_var, viafb_get_best_mode( | |
| default_var.xres, default_var.yres, viafb_refresh)); | |
| viafb_setup_fixinfo(&viafbinfo->fix, viaparinfo); | |
| viafbinfo->var = default_var; | |
| if (viafb_dual_fb) { | |
| viafbinfo1 = framebuffer_alloc(viafb_par_length, | |
| &vdev->pdev->dev); | |
| if (!viafbinfo1) { | |
| printk(KERN_ERR | |
| "allocate the second framebuffer struct error\n"); | |
| rc = -ENOMEM; | |
| goto out_fb_release; | |
| } | |
| viaparinfo1 = viafbinfo1->par; | |
| memcpy(viaparinfo1, viaparinfo, viafb_par_length); | |
| viaparinfo1->vram_addr = viafb_second_offset; | |
| viaparinfo1->memsize = viaparinfo->memsize - | |
| viafb_second_offset; | |
| viaparinfo->memsize = viafb_second_offset; | |
| viaparinfo1->fbmem = viaparinfo->fbmem + viafb_second_offset; | |
| viaparinfo1->fbmem_used = viaparinfo->fbmem_used; | |
| viaparinfo1->fbmem_free = viaparinfo1->memsize - | |
| viaparinfo1->fbmem_used; | |
| viaparinfo->fbmem_free = viaparinfo->memsize; | |
| viaparinfo->fbmem_used = 0; | |
| viaparinfo->iga_path = IGA1; | |
| viaparinfo1->iga_path = IGA2; | |
| memcpy(viafbinfo1, viafbinfo, sizeof(struct fb_info)); | |
| viafbinfo1->par = viaparinfo1; | |
| viafbinfo1->screen_base = viafbinfo->screen_base + | |
| viafb_second_offset; | |
| default_var.xres = viafb_second_xres; | |
| default_var.yres = viafb_second_yres; | |
| default_var.xres_virtual = viafb_second_xres; | |
| default_var.yres_virtual = viafb_second_yres; | |
| default_var.bits_per_pixel = viafb_bpp1; | |
| viafb_fill_var_timing_info(&default_var, viafb_get_best_mode( | |
| default_var.xres, default_var.yres, viafb_refresh1)); | |
| viafb_setup_fixinfo(&viafbinfo1->fix, viaparinfo1); | |
| viafb_check_var(&default_var, viafbinfo1); | |
| viafbinfo1->var = default_var; | |
| viafb_update_fix(viafbinfo1); | |
| viaparinfo1->depth = fb_get_color_depth(&viafbinfo1->var, | |
| &viafbinfo1->fix); | |
| } | |
| viafb_check_var(&viafbinfo->var, viafbinfo); | |
| viafb_update_fix(viafbinfo); | |
| viaparinfo->depth = fb_get_color_depth(&viafbinfo->var, | |
| &viafbinfo->fix); | |
| default_var.activate = FB_ACTIVATE_NOW; | |
| rc = fb_alloc_cmap(&viafbinfo->cmap, 256, 0); | |
| if (rc) | |
| goto out_fb1_release; | |
| if (viafb_dual_fb && (viafb_primary_dev == LCD_Device) | |
| && (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)) { | |
| rc = register_framebuffer(viafbinfo1); | |
| if (rc) | |
| goto out_dealloc_cmap; | |
| } | |
| rc = register_framebuffer(viafbinfo); | |
| if (rc) | |
| goto out_fb1_unreg_lcd_cle266; | |
| if (viafb_dual_fb && ((viafb_primary_dev != LCD_Device) | |
| || (viaparinfo->chip_info->gfx_chip_name != | |
| UNICHROME_CLE266))) { | |
| rc = register_framebuffer(viafbinfo1); | |
| if (rc) | |
| goto out_fb_unreg; | |
| } | |
| DEBUG_MSG(KERN_INFO "fb%d: %s frame buffer device %dx%d-%dbpp\n", | |
| viafbinfo->node, viafbinfo->fix.id, default_var.xres, | |
| default_var.yres, default_var.bits_per_pixel); | |
| viafb_init_proc(viaparinfo->shared); | |
| viafb_init_dac(IGA2); | |
| #ifdef CONFIG_PM | |
| viafb_pm_register(&viafb_fb_pm_hooks); | |
| #endif | |
| return 0; | |
| out_fb_unreg: | |
| unregister_framebuffer(viafbinfo); | |
| out_fb1_unreg_lcd_cle266: | |
| if (viafb_dual_fb && (viafb_primary_dev == LCD_Device) | |
| && (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)) | |
| unregister_framebuffer(viafbinfo1); | |
| out_dealloc_cmap: | |
| fb_dealloc_cmap(&viafbinfo->cmap); | |
| out_fb1_release: | |
| framebuffer_release(viafbinfo1); | |
| out_fb_release: | |
| i2c_bus_free(viaparinfo->shared); | |
| framebuffer_release(viafbinfo); | |
| return rc; | |
| } | |
| void via_fb_pci_remove(struct pci_dev *pdev) | |
| { | |
| DEBUG_MSG(KERN_INFO "via_pci_remove!\n"); | |
| fb_dealloc_cmap(&viafbinfo->cmap); | |
| unregister_framebuffer(viafbinfo); | |
| if (viafb_dual_fb) | |
| unregister_framebuffer(viafbinfo1); | |
| viafb_remove_proc(viaparinfo->shared); | |
| i2c_bus_free(viaparinfo->shared); | |
| framebuffer_release(viafbinfo); | |
| if (viafb_dual_fb) | |
| framebuffer_release(viafbinfo1); | |
| } | |
| #ifndef MODULE | |
| static int __init viafb_setup(void) | |
| { | |
| char *this_opt; | |
| char *options; | |
| DEBUG_MSG(KERN_INFO "viafb_setup!\n"); | |
| if (fb_get_options("viafb", &options)) | |
| return -ENODEV; | |
| if (!options || !*options) | |
| return 0; | |
| while ((this_opt = strsep(&options, ",")) != NULL) { | |
| if (!*this_opt) | |
| continue; | |
| if (!strncmp(this_opt, "viafb_mode1=", 12)) { | |
| viafb_mode1 = kstrdup(this_opt + 12, GFP_KERNEL); | |
| } else if (!strncmp(this_opt, "viafb_mode=", 11)) { | |
| viafb_mode = kstrdup(this_opt + 11, GFP_KERNEL); | |
| } else if (!strncmp(this_opt, "viafb_bpp1=", 11)) { | |
| if (kstrtouint(this_opt + 11, 0, &viafb_bpp1) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, "viafb_bpp=", 10)) { | |
| if (kstrtouint(this_opt + 10, 0, &viafb_bpp) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, "viafb_refresh1=", 15)) { | |
| if (kstrtoint(this_opt + 15, 0, &viafb_refresh1) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, "viafb_refresh=", 14)) { | |
| if (kstrtoint(this_opt + 14, 0, &viafb_refresh) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, "viafb_lcd_dsp_method=", 21)) { | |
| if (kstrtoint(this_opt + 21, 0, | |
| &viafb_lcd_dsp_method) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, "viafb_lcd_panel_id=", 19)) { | |
| if (kstrtoint(this_opt + 19, 0, | |
| &viafb_lcd_panel_id) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, "viafb_accel=", 12)) { | |
| if (kstrtoint(this_opt + 12, 0, &viafb_accel) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, "viafb_SAMM_ON=", 14)) { | |
| if (kstrtoint(this_opt + 14, 0, &viafb_SAMM_ON) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, "viafb_active_dev=", 17)) { | |
| viafb_active_dev = kstrdup(this_opt + 17, GFP_KERNEL); | |
| } else if (!strncmp(this_opt, | |
| "viafb_display_hardware_layout=", 30)) { | |
| if (kstrtoint(this_opt + 30, 0, | |
| &viafb_display_hardware_layout) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, "viafb_second_size=", 18)) { | |
| if (kstrtoint(this_opt + 18, 0, &viafb_second_size) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, | |
| "viafb_platform_epia_dvi=", 24)) { | |
| if (kstrtoint(this_opt + 24, 0, | |
| &viafb_platform_epia_dvi) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, | |
| "viafb_device_lcd_dualedge=", 26)) { | |
| if (kstrtoint(this_opt + 26, 0, | |
| &viafb_device_lcd_dualedge) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, "viafb_bus_width=", 16)) { | |
| if (kstrtoint(this_opt + 16, 0, &viafb_bus_width) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, "viafb_lcd_mode=", 15)) { | |
| if (kstrtoint(this_opt + 15, 0, &viafb_lcd_mode) < 0) | |
| return -EINVAL; | |
| } else if (!strncmp(this_opt, "viafb_lcd_port=", 15)) { | |
| viafb_lcd_port = kstrdup(this_opt + 15, GFP_KERNEL); | |
| } else if (!strncmp(this_opt, "viafb_dvi_port=", 15)) { | |
| viafb_dvi_port = kstrdup(this_opt + 15, GFP_KERNEL); | |
| } | |
| } | |
| return 0; | |
| } | |
| #endif | |
| /* | |
| * These are called out of via-core for now. | |
| */ | |
| int __init viafb_init(void) | |
| { | |
| u32 dummy_x, dummy_y; | |
| int r = 0; | |
| if (machine_is_olpc()) | |
| /* Apply XO-1.5-specific configuration. */ | |
| viafb_lcd_panel_id = 23; | |
| #ifndef MODULE | |
| r = viafb_setup(); | |
| if (r < 0) | |
| return r; | |
| #endif | |
| if (parse_mode(viafb_mode, 0, &dummy_x, &dummy_y) | |
| || !viafb_get_best_mode(dummy_x, dummy_y, viafb_refresh) | |
| || parse_mode(viafb_mode1, 0, &dummy_x, &dummy_y) | |
| || !viafb_get_best_mode(dummy_x, dummy_y, viafb_refresh1) | |
| || viafb_bpp < 0 || viafb_bpp > 32 | |
| || viafb_bpp1 < 0 || viafb_bpp1 > 32 | |
| || parse_active_dev()) | |
| return -EINVAL; | |
| printk(KERN_INFO | |
| "VIA Graphics Integration Chipset framebuffer %d.%d initializing\n", | |
| VERSION_MAJOR, VERSION_MINOR); | |
| return r; | |
| } | |
| void __exit viafb_exit(void) | |
| { | |
| DEBUG_MSG(KERN_INFO "viafb_exit!\n"); | |
| } | |
| static struct fb_ops viafb_ops = { | |
| .owner = THIS_MODULE, | |
| .fb_open = viafb_open, | |
| .fb_release = viafb_release, | |
| .fb_check_var = viafb_check_var, | |
| .fb_set_par = viafb_set_par, | |
| .fb_setcolreg = viafb_setcolreg, | |
| .fb_pan_display = viafb_pan_display, | |
| .fb_blank = viafb_blank, | |
| .fb_fillrect = viafb_fillrect, | |
| .fb_copyarea = viafb_copyarea, | |
| .fb_imageblit = viafb_imageblit, | |
| .fb_cursor = viafb_cursor, | |
| .fb_ioctl = viafb_ioctl, | |
| .fb_sync = viafb_sync, | |
| }; | |
| #ifdef MODULE | |
| module_param(viafb_mode, charp, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_mode, "Set resolution (default=640x480)"); | |
| module_param(viafb_mode1, charp, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_mode1, "Set resolution (default=640x480)"); | |
| module_param(viafb_bpp, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_bpp, "Set color depth (default=32bpp)"); | |
| module_param(viafb_bpp1, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_bpp1, "Set color depth (default=32bpp)"); | |
| module_param(viafb_refresh, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_refresh, | |
| "Set CRT viafb_refresh rate (default = 60)"); | |
| module_param(viafb_refresh1, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_refresh1, | |
| "Set CRT refresh rate (default = 60)"); | |
| module_param(viafb_lcd_panel_id, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_lcd_panel_id, | |
| "Set Flat Panel type(Default=1024x768)"); | |
| module_param(viafb_lcd_dsp_method, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_lcd_dsp_method, | |
| "Set Flat Panel display scaling method.(Default=Expandsion)"); | |
| module_param(viafb_SAMM_ON, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_SAMM_ON, | |
| "Turn on/off flag of SAMM(Default=OFF)"); | |
| module_param(viafb_accel, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_accel, | |
| "Set 2D Hardware Acceleration: 0 = OFF, 1 = ON (default)"); | |
| module_param(viafb_active_dev, charp, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_active_dev, "Specify active devices."); | |
| module_param(viafb_display_hardware_layout, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_display_hardware_layout, | |
| "Display Hardware Layout (LCD Only, DVI Only...,etc)"); | |
| module_param(viafb_second_size, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_second_size, | |
| "Set secondary device memory size"); | |
| module_param(viafb_dual_fb, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_dual_fb, | |
| "Turn on/off flag of dual framebuffer devices.(Default = OFF)"); | |
| module_param(viafb_platform_epia_dvi, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_platform_epia_dvi, | |
| "Turn on/off flag of DVI devices on EPIA board.(Default = OFF)"); | |
| module_param(viafb_device_lcd_dualedge, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_device_lcd_dualedge, | |
| "Turn on/off flag of dual edge panel.(Default = OFF)"); | |
| module_param(viafb_bus_width, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_bus_width, | |
| "Set bus width of panel.(Default = 12)"); | |
| module_param(viafb_lcd_mode, int, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_lcd_mode, | |
| "Set Flat Panel mode(Default=OPENLDI)"); | |
| module_param(viafb_lcd_port, charp, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_lcd_port, "Specify LCD output port."); | |
| module_param(viafb_dvi_port, charp, S_IRUSR); | |
| MODULE_PARM_DESC(viafb_dvi_port, "Specify DVI output port."); | |
| MODULE_LICENSE("GPL"); | |
| #endif |