| /* | |
| * tps62360.c -- TI tps62360 | |
| * | |
| * Driver for processor core supply tps62360, tps62361B, tps62362 and tps62363. | |
| * | |
| * Copyright (c) 2012, NVIDIA Corporation. | |
| * | |
| * Author: Laxman Dewangan <ldewangan@nvidia.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation version 2. | |
| * | |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, | |
| * whether express or implied; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA | |
| * 02111-1307, USA | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/err.h> | |
| #include <linux/of.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of_gpio.h> | |
| #include <linux/regulator/of_regulator.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regulator/driver.h> | |
| #include <linux/regulator/machine.h> | |
| #include <linux/regulator/tps62360.h> | |
| #include <linux/gpio.h> | |
| #include <linux/i2c.h> | |
| #include <linux/slab.h> | |
| #include <linux/regmap.h> | |
| /* Register definitions */ | |
| #define REG_VSET0 0 | |
| #define REG_VSET1 1 | |
| #define REG_VSET2 2 | |
| #define REG_VSET3 3 | |
| #define REG_CONTROL 4 | |
| #define REG_TEMP 5 | |
| #define REG_RAMPCTRL 6 | |
| #define REG_CHIPID 8 | |
| #define FORCE_PWM_ENABLE BIT(7) | |
| enum chips {TPS62360, TPS62361, TPS62362, TPS62363}; | |
| #define TPS62360_BASE_VOLTAGE 770000 | |
| #define TPS62360_N_VOLTAGES 64 | |
| #define TPS62361_BASE_VOLTAGE 500000 | |
| #define TPS62361_N_VOLTAGES 128 | |
| /* tps 62360 chip information */ | |
| struct tps62360_chip { | |
| struct device *dev; | |
| struct regulator_desc desc; | |
| struct regulator_dev *rdev; | |
| struct regmap *regmap; | |
| int vsel0_gpio; | |
| int vsel1_gpio; | |
| u8 voltage_reg_mask; | |
| bool en_internal_pulldn; | |
| bool en_discharge; | |
| bool valid_gpios; | |
| int lru_index[4]; | |
| int curr_vset_vsel[4]; | |
| int curr_vset_id; | |
| }; | |
| /* | |
| * find_voltage_set_register: Find new voltage configuration register | |
| * (VSET) id. | |
| * The finding of the new VSET register will be based on the LRU mechanism. | |
| * Each VSET register will have different voltage configured . This | |
| * Function will look if any of the VSET register have requested voltage set | |
| * or not. | |
| * - If it is already there then it will make that register as most | |
| * recently used and return as found so that caller need not to set | |
| * the VSET register but need to set the proper gpios to select this | |
| * VSET register. | |
| * - If requested voltage is not found then it will use the least | |
| * recently mechanism to get new VSET register for new configuration | |
| * and will return not_found so that caller need to set new VSET | |
| * register and then gpios (both). | |
| */ | |
| static bool find_voltage_set_register(struct tps62360_chip *tps, | |
| int req_vsel, int *vset_reg_id) | |
| { | |
| int i; | |
| bool found = false; | |
| int new_vset_reg = tps->lru_index[3]; | |
| int found_index = 3; | |
| for (i = 0; i < 4; ++i) { | |
| if (tps->curr_vset_vsel[tps->lru_index[i]] == req_vsel) { | |
| new_vset_reg = tps->lru_index[i]; | |
| found_index = i; | |
| found = true; | |
| goto update_lru_index; | |
| } | |
| } | |
| update_lru_index: | |
| for (i = found_index; i > 0; i--) | |
| tps->lru_index[i] = tps->lru_index[i - 1]; | |
| tps->lru_index[0] = new_vset_reg; | |
| *vset_reg_id = new_vset_reg; | |
| return found; | |
| } | |
| static int tps62360_dcdc_get_voltage_sel(struct regulator_dev *dev) | |
| { | |
| struct tps62360_chip *tps = rdev_get_drvdata(dev); | |
| int vsel; | |
| unsigned int data; | |
| int ret; | |
| ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data); | |
| if (ret < 0) { | |
| dev_err(tps->dev, "%s(): register %d read failed with err %d\n", | |
| __func__, REG_VSET0 + tps->curr_vset_id, ret); | |
| return ret; | |
| } | |
| vsel = (int)data & tps->voltage_reg_mask; | |
| return vsel; | |
| } | |
| static int tps62360_dcdc_set_voltage_sel(struct regulator_dev *dev, | |
| unsigned selector) | |
| { | |
| struct tps62360_chip *tps = rdev_get_drvdata(dev); | |
| int ret; | |
| bool found = false; | |
| int new_vset_id = tps->curr_vset_id; | |
| /* | |
| * If gpios are available to select the VSET register then least | |
| * recently used register for new configuration. | |
| */ | |
| if (tps->valid_gpios) | |
| found = find_voltage_set_register(tps, selector, &new_vset_id); | |
| if (!found) { | |
| ret = regmap_update_bits(tps->regmap, REG_VSET0 + new_vset_id, | |
| tps->voltage_reg_mask, selector); | |
| if (ret < 0) { | |
| dev_err(tps->dev, | |
| "%s(): register %d update failed with err %d\n", | |
| __func__, REG_VSET0 + new_vset_id, ret); | |
| return ret; | |
| } | |
| tps->curr_vset_id = new_vset_id; | |
| tps->curr_vset_vsel[new_vset_id] = selector; | |
| } | |
| /* Select proper VSET register vio gpios */ | |
| if (tps->valid_gpios) { | |
| gpio_set_value_cansleep(tps->vsel0_gpio, new_vset_id & 0x1); | |
| gpio_set_value_cansleep(tps->vsel1_gpio, | |
| (new_vset_id >> 1) & 0x1); | |
| } | |
| return 0; | |
| } | |
| static int tps62360_set_mode(struct regulator_dev *rdev, unsigned int mode) | |
| { | |
| struct tps62360_chip *tps = rdev_get_drvdata(rdev); | |
| int i; | |
| int val; | |
| int ret; | |
| /* Enable force PWM mode in FAST mode only. */ | |
| switch (mode) { | |
| case REGULATOR_MODE_FAST: | |
| val = FORCE_PWM_ENABLE; | |
| break; | |
| case REGULATOR_MODE_NORMAL: | |
| val = 0; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (!tps->valid_gpios) { | |
| ret = regmap_update_bits(tps->regmap, | |
| REG_VSET0 + tps->curr_vset_id, FORCE_PWM_ENABLE, val); | |
| if (ret < 0) | |
| dev_err(tps->dev, | |
| "%s(): register %d update failed with err %d\n", | |
| __func__, REG_VSET0 + tps->curr_vset_id, ret); | |
| return ret; | |
| } | |
| /* If gpios are valid then all register set need to be control */ | |
| for (i = 0; i < 4; ++i) { | |
| ret = regmap_update_bits(tps->regmap, | |
| REG_VSET0 + i, FORCE_PWM_ENABLE, val); | |
| if (ret < 0) { | |
| dev_err(tps->dev, | |
| "%s(): register %d update failed with err %d\n", | |
| __func__, REG_VSET0 + i, ret); | |
| return ret; | |
| } | |
| } | |
| return ret; | |
| } | |
| static unsigned int tps62360_get_mode(struct regulator_dev *rdev) | |
| { | |
| struct tps62360_chip *tps = rdev_get_drvdata(rdev); | |
| unsigned int data; | |
| int ret; | |
| ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data); | |
| if (ret < 0) { | |
| dev_err(tps->dev, "%s(): register %d read failed with err %d\n", | |
| __func__, REG_VSET0 + tps->curr_vset_id, ret); | |
| return ret; | |
| } | |
| return (data & FORCE_PWM_ENABLE) ? | |
| REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL; | |
| } | |
| static struct regulator_ops tps62360_dcdc_ops = { | |
| .get_voltage_sel = tps62360_dcdc_get_voltage_sel, | |
| .set_voltage_sel = tps62360_dcdc_set_voltage_sel, | |
| .list_voltage = regulator_list_voltage_linear, | |
| .map_voltage = regulator_map_voltage_linear, | |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, | |
| .set_mode = tps62360_set_mode, | |
| .get_mode = tps62360_get_mode, | |
| }; | |
| static int tps62360_init_dcdc(struct tps62360_chip *tps, | |
| struct tps62360_regulator_platform_data *pdata) | |
| { | |
| int ret; | |
| unsigned int ramp_ctrl; | |
| /* Initialize internal pull up/down control */ | |
| if (tps->en_internal_pulldn) | |
| ret = regmap_write(tps->regmap, REG_CONTROL, 0xE0); | |
| else | |
| ret = regmap_write(tps->regmap, REG_CONTROL, 0x0); | |
| if (ret < 0) { | |
| dev_err(tps->dev, | |
| "%s(): register %d write failed with err %d\n", | |
| __func__, REG_CONTROL, ret); | |
| return ret; | |
| } | |
| /* Reset output discharge path to reduce power consumption */ | |
| ret = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), 0); | |
| if (ret < 0) { | |
| dev_err(tps->dev, | |
| "%s(): register %d update failed with err %d\n", | |
| __func__, REG_RAMPCTRL, ret); | |
| return ret; | |
| } | |
| /* Get ramp value from ramp control register */ | |
| ret = regmap_read(tps->regmap, REG_RAMPCTRL, &ramp_ctrl); | |
| if (ret < 0) { | |
| dev_err(tps->dev, | |
| "%s(): register %d read failed with err %d\n", | |
| __func__, REG_RAMPCTRL, ret); | |
| return ret; | |
| } | |
| ramp_ctrl = (ramp_ctrl >> 5) & 0x7; | |
| /* ramp mV/us = 32/(2^ramp_ctrl) */ | |
| tps->desc.ramp_delay = DIV_ROUND_UP(32000, BIT(ramp_ctrl)); | |
| return ret; | |
| } | |
| static const struct regmap_config tps62360_regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .max_register = REG_CHIPID, | |
| .cache_type = REGCACHE_RBTREE, | |
| }; | |
| static struct tps62360_regulator_platform_data * | |
| of_get_tps62360_platform_data(struct device *dev, | |
| const struct regulator_desc *desc) | |
| { | |
| struct tps62360_regulator_platform_data *pdata; | |
| struct device_node *np = dev->of_node; | |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); | |
| if (!pdata) | |
| return NULL; | |
| pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node, | |
| desc); | |
| if (!pdata->reg_init_data) { | |
| dev_err(dev, "Not able to get OF regulator init data\n"); | |
| return NULL; | |
| } | |
| pdata->vsel0_gpio = of_get_named_gpio(np, "vsel0-gpio", 0); | |
| pdata->vsel1_gpio = of_get_named_gpio(np, "vsel1-gpio", 0); | |
| if (of_find_property(np, "ti,vsel0-state-high", NULL)) | |
| pdata->vsel0_def_state = 1; | |
| if (of_find_property(np, "ti,vsel1-state-high", NULL)) | |
| pdata->vsel1_def_state = 1; | |
| if (of_find_property(np, "ti,enable-pull-down", NULL)) | |
| pdata->en_internal_pulldn = true; | |
| if (of_find_property(np, "ti,enable-vout-discharge", NULL)) | |
| pdata->en_discharge = true; | |
| return pdata; | |
| } | |
| #if defined(CONFIG_OF) | |
| static const struct of_device_id tps62360_of_match[] = { | |
| { .compatible = "ti,tps62360", .data = (void *)TPS62360}, | |
| { .compatible = "ti,tps62361", .data = (void *)TPS62361}, | |
| { .compatible = "ti,tps62362", .data = (void *)TPS62362}, | |
| { .compatible = "ti,tps62363", .data = (void *)TPS62363}, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, tps62360_of_match); | |
| #endif | |
| static int tps62360_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct regulator_config config = { }; | |
| struct tps62360_regulator_platform_data *pdata; | |
| struct regulator_dev *rdev; | |
| struct tps62360_chip *tps; | |
| int ret; | |
| int i; | |
| int chip_id; | |
| pdata = dev_get_platdata(&client->dev); | |
| tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); | |
| if (!tps) | |
| return -ENOMEM; | |
| tps->desc.name = client->name; | |
| tps->desc.id = 0; | |
| tps->desc.ops = &tps62360_dcdc_ops; | |
| tps->desc.type = REGULATOR_VOLTAGE; | |
| tps->desc.owner = THIS_MODULE; | |
| tps->desc.uV_step = 10000; | |
| if (client->dev.of_node) { | |
| const struct of_device_id *match; | |
| match = of_match_device(of_match_ptr(tps62360_of_match), | |
| &client->dev); | |
| if (!match) { | |
| dev_err(&client->dev, "Error: No device match found\n"); | |
| return -ENODEV; | |
| } | |
| chip_id = (int)(long)match->data; | |
| if (!pdata) | |
| pdata = of_get_tps62360_platform_data(&client->dev, | |
| &tps->desc); | |
| } else if (id) { | |
| chip_id = id->driver_data; | |
| } else { | |
| dev_err(&client->dev, "No device tree match or id table match found\n"); | |
| return -ENODEV; | |
| } | |
| if (!pdata) { | |
| dev_err(&client->dev, "%s(): Platform data not found\n", | |
| __func__); | |
| return -EIO; | |
| } | |
| tps->en_discharge = pdata->en_discharge; | |
| tps->en_internal_pulldn = pdata->en_internal_pulldn; | |
| tps->vsel0_gpio = pdata->vsel0_gpio; | |
| tps->vsel1_gpio = pdata->vsel1_gpio; | |
| tps->dev = &client->dev; | |
| switch (chip_id) { | |
| case TPS62360: | |
| case TPS62362: | |
| tps->desc.min_uV = TPS62360_BASE_VOLTAGE; | |
| tps->voltage_reg_mask = 0x3F; | |
| tps->desc.n_voltages = TPS62360_N_VOLTAGES; | |
| break; | |
| case TPS62361: | |
| case TPS62363: | |
| tps->desc.min_uV = TPS62361_BASE_VOLTAGE; | |
| tps->voltage_reg_mask = 0x7F; | |
| tps->desc.n_voltages = TPS62361_N_VOLTAGES; | |
| break; | |
| default: | |
| return -ENODEV; | |
| } | |
| tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config); | |
| if (IS_ERR(tps->regmap)) { | |
| ret = PTR_ERR(tps->regmap); | |
| dev_err(&client->dev, | |
| "%s(): regmap allocation failed with err %d\n", | |
| __func__, ret); | |
| return ret; | |
| } | |
| i2c_set_clientdata(client, tps); | |
| tps->curr_vset_id = (pdata->vsel1_def_state & 1) * 2 + | |
| (pdata->vsel0_def_state & 1); | |
| tps->lru_index[0] = tps->curr_vset_id; | |
| tps->valid_gpios = false; | |
| if (gpio_is_valid(tps->vsel0_gpio) && gpio_is_valid(tps->vsel1_gpio)) { | |
| int gpio_flags; | |
| gpio_flags = (pdata->vsel0_def_state) ? | |
| GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; | |
| ret = devm_gpio_request_one(&client->dev, tps->vsel0_gpio, | |
| gpio_flags, "tps62360-vsel0"); | |
| if (ret) { | |
| dev_err(&client->dev, | |
| "%s(): Could not obtain vsel0 GPIO %d: %d\n", | |
| __func__, tps->vsel0_gpio, ret); | |
| return ret; | |
| } | |
| gpio_flags = (pdata->vsel1_def_state) ? | |
| GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; | |
| ret = devm_gpio_request_one(&client->dev, tps->vsel1_gpio, | |
| gpio_flags, "tps62360-vsel1"); | |
| if (ret) { | |
| dev_err(&client->dev, | |
| "%s(): Could not obtain vsel1 GPIO %d: %d\n", | |
| __func__, tps->vsel1_gpio, ret); | |
| return ret; | |
| } | |
| tps->valid_gpios = true; | |
| /* | |
| * Initialize the lru index with vset_reg id | |
| * The index 0 will be most recently used and | |
| * set with the tps->curr_vset_id */ | |
| for (i = 0; i < 4; ++i) | |
| tps->lru_index[i] = i; | |
| tps->lru_index[0] = tps->curr_vset_id; | |
| tps->lru_index[tps->curr_vset_id] = 0; | |
| } | |
| ret = tps62360_init_dcdc(tps, pdata); | |
| if (ret < 0) { | |
| dev_err(tps->dev, "%s(): Init failed with err = %d\n", | |
| __func__, ret); | |
| return ret; | |
| } | |
| config.dev = &client->dev; | |
| config.init_data = pdata->reg_init_data; | |
| config.driver_data = tps; | |
| config.of_node = client->dev.of_node; | |
| /* Register the regulators */ | |
| rdev = devm_regulator_register(&client->dev, &tps->desc, &config); | |
| if (IS_ERR(rdev)) { | |
| dev_err(tps->dev, | |
| "%s(): regulator register failed with err %s\n", | |
| __func__, id->name); | |
| return PTR_ERR(rdev); | |
| } | |
| tps->rdev = rdev; | |
| return 0; | |
| } | |
| static void tps62360_shutdown(struct i2c_client *client) | |
| { | |
| struct tps62360_chip *tps = i2c_get_clientdata(client); | |
| int st; | |
| if (!tps->en_discharge) | |
| return; | |
| /* Configure the output discharge path */ | |
| st = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), BIT(2)); | |
| if (st < 0) | |
| dev_err(tps->dev, | |
| "%s(): register %d update failed with err %d\n", | |
| __func__, REG_RAMPCTRL, st); | |
| } | |
| static const struct i2c_device_id tps62360_id[] = { | |
| {.name = "tps62360", .driver_data = TPS62360}, | |
| {.name = "tps62361", .driver_data = TPS62361}, | |
| {.name = "tps62362", .driver_data = TPS62362}, | |
| {.name = "tps62363", .driver_data = TPS62363}, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, tps62360_id); | |
| static struct i2c_driver tps62360_i2c_driver = { | |
| .driver = { | |
| .name = "tps62360", | |
| .of_match_table = of_match_ptr(tps62360_of_match), | |
| }, | |
| .probe = tps62360_probe, | |
| .shutdown = tps62360_shutdown, | |
| .id_table = tps62360_id, | |
| }; | |
| static int __init tps62360_init(void) | |
| { | |
| return i2c_add_driver(&tps62360_i2c_driver); | |
| } | |
| subsys_initcall(tps62360_init); | |
| static void __exit tps62360_cleanup(void) | |
| { | |
| i2c_del_driver(&tps62360_i2c_driver); | |
| } | |
| module_exit(tps62360_cleanup); | |
| MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); | |
| MODULE_DESCRIPTION("TPS6236x voltage regulator driver"); | |
| MODULE_LICENSE("GPL v2"); |