| /* | |
| * ISP1704 USB Charger Detection driver | |
| * | |
| * Copyright (C) 2010 Nokia Corporation | |
| * Copyright (C) 2012 - 2013 Pali Rohár <pali.rohar@gmail.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/err.h> | |
| #include <linux/init.h> | |
| #include <linux/types.h> | |
| #include <linux/device.h> | |
| #include <linux/sysfs.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/power_supply.h> | |
| #include <linux/delay.h> | |
| #include <linux/of.h> | |
| #include <linux/of_gpio.h> | |
| #include <linux/usb/otg.h> | |
| #include <linux/usb/ulpi.h> | |
| #include <linux/usb/ch9.h> | |
| #include <linux/usb/gadget.h> | |
| #include <linux/power/isp1704_charger.h> | |
| /* Vendor specific Power Control register */ | |
| #define ISP1704_PWR_CTRL 0x3d | |
| #define ISP1704_PWR_CTRL_SWCTRL (1 << 0) | |
| #define ISP1704_PWR_CTRL_DET_COMP (1 << 1) | |
| #define ISP1704_PWR_CTRL_BVALID_RISE (1 << 2) | |
| #define ISP1704_PWR_CTRL_BVALID_FALL (1 << 3) | |
| #define ISP1704_PWR_CTRL_DP_WKPU_EN (1 << 4) | |
| #define ISP1704_PWR_CTRL_VDAT_DET (1 << 5) | |
| #define ISP1704_PWR_CTRL_DPVSRC_EN (1 << 6) | |
| #define ISP1704_PWR_CTRL_HWDETECT (1 << 7) | |
| #define NXP_VENDOR_ID 0x04cc | |
| static u16 isp170x_id[] = { | |
| 0x1704, | |
| 0x1707, | |
| }; | |
| struct isp1704_charger { | |
| struct device *dev; | |
| struct power_supply *psy; | |
| struct power_supply_desc psy_desc; | |
| struct usb_phy *phy; | |
| struct notifier_block nb; | |
| struct work_struct work; | |
| /* properties */ | |
| char model[8]; | |
| unsigned present:1; | |
| unsigned online:1; | |
| unsigned current_max; | |
| }; | |
| static inline int isp1704_read(struct isp1704_charger *isp, u32 reg) | |
| { | |
| return usb_phy_io_read(isp->phy, reg); | |
| } | |
| static inline int isp1704_write(struct isp1704_charger *isp, u32 reg, u32 val) | |
| { | |
| return usb_phy_io_write(isp->phy, val, reg); | |
| } | |
| /* | |
| * Disable/enable the power from the isp1704 if a function for it | |
| * has been provided with platform data. | |
| */ | |
| static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on) | |
| { | |
| struct isp1704_charger_data *board = isp->dev->platform_data; | |
| if (board && board->set_power) | |
| board->set_power(on); | |
| else if (board) | |
| gpio_set_value(board->enable_gpio, on); | |
| } | |
| /* | |
| * Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB | |
| * chargers). | |
| * | |
| * REVISIT: The method is defined in Battery Charging Specification and is | |
| * applicable to any ULPI transceiver. Nothing isp170x specific here. | |
| */ | |
| static inline int isp1704_charger_type(struct isp1704_charger *isp) | |
| { | |
| u8 reg; | |
| u8 func_ctrl; | |
| u8 otg_ctrl; | |
| int type = POWER_SUPPLY_TYPE_USB_DCP; | |
| func_ctrl = isp1704_read(isp, ULPI_FUNC_CTRL); | |
| otg_ctrl = isp1704_read(isp, ULPI_OTG_CTRL); | |
| /* disable pulldowns */ | |
| reg = ULPI_OTG_CTRL_DM_PULLDOWN | ULPI_OTG_CTRL_DP_PULLDOWN; | |
| isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), reg); | |
| /* full speed */ | |
| isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL), | |
| ULPI_FUNC_CTRL_XCVRSEL_MASK); | |
| isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), | |
| ULPI_FUNC_CTRL_FULL_SPEED); | |
| /* Enable strong pull-up on DP (1.5K) and reset */ | |
| reg = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET; | |
| isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), reg); | |
| usleep_range(1000, 2000); | |
| reg = isp1704_read(isp, ULPI_DEBUG); | |
| if ((reg & 3) != 3) | |
| type = POWER_SUPPLY_TYPE_USB_CDP; | |
| /* recover original state */ | |
| isp1704_write(isp, ULPI_FUNC_CTRL, func_ctrl); | |
| isp1704_write(isp, ULPI_OTG_CTRL, otg_ctrl); | |
| return type; | |
| } | |
| /* | |
| * ISP1704 detects PS/2 adapters as charger. To make sure the detected charger | |
| * is actually a dedicated charger, the following steps need to be taken. | |
| */ | |
| static inline int isp1704_charger_verify(struct isp1704_charger *isp) | |
| { | |
| int ret = 0; | |
| u8 r; | |
| /* Reset the transceiver */ | |
| r = isp1704_read(isp, ULPI_FUNC_CTRL); | |
| r |= ULPI_FUNC_CTRL_RESET; | |
| isp1704_write(isp, ULPI_FUNC_CTRL, r); | |
| usleep_range(1000, 2000); | |
| /* Set normal mode */ | |
| r &= ~(ULPI_FUNC_CTRL_RESET | ULPI_FUNC_CTRL_OPMODE_MASK); | |
| isp1704_write(isp, ULPI_FUNC_CTRL, r); | |
| /* Clear the DP and DM pull-down bits */ | |
| r = ULPI_OTG_CTRL_DP_PULLDOWN | ULPI_OTG_CTRL_DM_PULLDOWN; | |
| isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), r); | |
| /* Enable strong pull-up on DP (1.5K) and reset */ | |
| r = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET; | |
| isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), r); | |
| usleep_range(1000, 2000); | |
| /* Read the line state */ | |
| if (!isp1704_read(isp, ULPI_DEBUG)) { | |
| /* Disable strong pull-up on DP (1.5K) */ | |
| isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL), | |
| ULPI_FUNC_CTRL_TERMSELECT); | |
| return 1; | |
| } | |
| /* Is it a charger or PS/2 connection */ | |
| /* Enable weak pull-up resistor on DP */ | |
| isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL), | |
| ISP1704_PWR_CTRL_DP_WKPU_EN); | |
| /* Disable strong pull-up on DP (1.5K) */ | |
| isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL), | |
| ULPI_FUNC_CTRL_TERMSELECT); | |
| /* Enable weak pull-down resistor on DM */ | |
| isp1704_write(isp, ULPI_SET(ULPI_OTG_CTRL), | |
| ULPI_OTG_CTRL_DM_PULLDOWN); | |
| /* It's a charger if the line states are clear */ | |
| if (!(isp1704_read(isp, ULPI_DEBUG))) | |
| ret = 1; | |
| /* Disable weak pull-up resistor on DP */ | |
| isp1704_write(isp, ULPI_CLR(ISP1704_PWR_CTRL), | |
| ISP1704_PWR_CTRL_DP_WKPU_EN); | |
| return ret; | |
| } | |
| static inline int isp1704_charger_detect(struct isp1704_charger *isp) | |
| { | |
| unsigned long timeout; | |
| u8 pwr_ctrl; | |
| int ret = 0; | |
| pwr_ctrl = isp1704_read(isp, ISP1704_PWR_CTRL); | |
| /* set SW control bit in PWR_CTRL register */ | |
| isp1704_write(isp, ISP1704_PWR_CTRL, | |
| ISP1704_PWR_CTRL_SWCTRL); | |
| /* enable manual charger detection */ | |
| isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL), | |
| ISP1704_PWR_CTRL_SWCTRL | |
| | ISP1704_PWR_CTRL_DPVSRC_EN); | |
| usleep_range(1000, 2000); | |
| timeout = jiffies + msecs_to_jiffies(300); | |
| do { | |
| /* Check if there is a charger */ | |
| if (isp1704_read(isp, ISP1704_PWR_CTRL) | |
| & ISP1704_PWR_CTRL_VDAT_DET) { | |
| ret = isp1704_charger_verify(isp); | |
| break; | |
| } | |
| } while (!time_after(jiffies, timeout) && isp->online); | |
| /* recover original state */ | |
| isp1704_write(isp, ISP1704_PWR_CTRL, pwr_ctrl); | |
| return ret; | |
| } | |
| static inline int isp1704_charger_detect_dcp(struct isp1704_charger *isp) | |
| { | |
| if (isp1704_charger_detect(isp) && | |
| isp1704_charger_type(isp) == POWER_SUPPLY_TYPE_USB_DCP) | |
| return true; | |
| else | |
| return false; | |
| } | |
| static void isp1704_charger_work(struct work_struct *data) | |
| { | |
| struct isp1704_charger *isp = | |
| container_of(data, struct isp1704_charger, work); | |
| static DEFINE_MUTEX(lock); | |
| mutex_lock(&lock); | |
| switch (isp->phy->last_event) { | |
| case USB_EVENT_VBUS: | |
| /* do not call wall charger detection more times */ | |
| if (!isp->present) { | |
| isp->online = true; | |
| isp->present = 1; | |
| isp1704_charger_set_power(isp, 1); | |
| /* detect wall charger */ | |
| if (isp1704_charger_detect_dcp(isp)) { | |
| isp->psy_desc.type = POWER_SUPPLY_TYPE_USB_DCP; | |
| isp->current_max = 1800; | |
| } else { | |
| isp->psy_desc.type = POWER_SUPPLY_TYPE_USB; | |
| isp->current_max = 500; | |
| } | |
| /* enable data pullups */ | |
| if (isp->phy->otg->gadget) | |
| usb_gadget_connect(isp->phy->otg->gadget); | |
| } | |
| if (isp->psy_desc.type != POWER_SUPPLY_TYPE_USB_DCP) { | |
| /* | |
| * Only 500mA here or high speed chirp | |
| * handshaking may break | |
| */ | |
| if (isp->current_max > 500) | |
| isp->current_max = 500; | |
| if (isp->current_max > 100) | |
| isp->psy_desc.type = POWER_SUPPLY_TYPE_USB_CDP; | |
| } | |
| break; | |
| case USB_EVENT_NONE: | |
| isp->online = false; | |
| isp->present = 0; | |
| isp->current_max = 0; | |
| isp->psy_desc.type = POWER_SUPPLY_TYPE_USB; | |
| /* | |
| * Disable data pullups. We need to prevent the controller from | |
| * enumerating. | |
| * | |
| * FIXME: This is here to allow charger detection with Host/HUB | |
| * chargers. The pullups may be enabled elsewhere, so this can | |
| * not be the final solution. | |
| */ | |
| if (isp->phy->otg->gadget) | |
| usb_gadget_disconnect(isp->phy->otg->gadget); | |
| isp1704_charger_set_power(isp, 0); | |
| break; | |
| default: | |
| goto out; | |
| } | |
| power_supply_changed(isp->psy); | |
| out: | |
| mutex_unlock(&lock); | |
| } | |
| static int isp1704_notifier_call(struct notifier_block *nb, | |
| unsigned long val, void *v) | |
| { | |
| struct isp1704_charger *isp = | |
| container_of(nb, struct isp1704_charger, nb); | |
| schedule_work(&isp->work); | |
| return NOTIFY_OK; | |
| } | |
| static int isp1704_charger_get_property(struct power_supply *psy, | |
| enum power_supply_property psp, | |
| union power_supply_propval *val) | |
| { | |
| struct isp1704_charger *isp = power_supply_get_drvdata(psy); | |
| switch (psp) { | |
| case POWER_SUPPLY_PROP_PRESENT: | |
| val->intval = isp->present; | |
| break; | |
| case POWER_SUPPLY_PROP_ONLINE: | |
| val->intval = isp->online; | |
| break; | |
| case POWER_SUPPLY_PROP_CURRENT_MAX: | |
| val->intval = isp->current_max; | |
| break; | |
| case POWER_SUPPLY_PROP_MODEL_NAME: | |
| val->strval = isp->model; | |
| break; | |
| case POWER_SUPPLY_PROP_MANUFACTURER: | |
| val->strval = "NXP"; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static enum power_supply_property power_props[] = { | |
| POWER_SUPPLY_PROP_PRESENT, | |
| POWER_SUPPLY_PROP_ONLINE, | |
| POWER_SUPPLY_PROP_CURRENT_MAX, | |
| POWER_SUPPLY_PROP_MODEL_NAME, | |
| POWER_SUPPLY_PROP_MANUFACTURER, | |
| }; | |
| static inline int isp1704_test_ulpi(struct isp1704_charger *isp) | |
| { | |
| int vendor; | |
| int product; | |
| int i; | |
| int ret = -ENODEV; | |
| /* Test ULPI interface */ | |
| ret = isp1704_write(isp, ULPI_SCRATCH, 0xaa); | |
| if (ret < 0) | |
| return ret; | |
| ret = isp1704_read(isp, ULPI_SCRATCH); | |
| if (ret < 0) | |
| return ret; | |
| if (ret != 0xaa) | |
| return -ENODEV; | |
| /* Verify the product and vendor id matches */ | |
| vendor = isp1704_read(isp, ULPI_VENDOR_ID_LOW); | |
| vendor |= isp1704_read(isp, ULPI_VENDOR_ID_HIGH) << 8; | |
| if (vendor != NXP_VENDOR_ID) | |
| return -ENODEV; | |
| product = isp1704_read(isp, ULPI_PRODUCT_ID_LOW); | |
| product |= isp1704_read(isp, ULPI_PRODUCT_ID_HIGH) << 8; | |
| for (i = 0; i < ARRAY_SIZE(isp170x_id); i++) { | |
| if (product == isp170x_id[i]) { | |
| sprintf(isp->model, "isp%x", product); | |
| return product; | |
| } | |
| } | |
| dev_err(isp->dev, "product id %x not matching known ids", product); | |
| return -ENODEV; | |
| } | |
| static int isp1704_charger_probe(struct platform_device *pdev) | |
| { | |
| struct isp1704_charger *isp; | |
| int ret = -ENODEV; | |
| struct power_supply_config psy_cfg = {}; | |
| struct isp1704_charger_data *pdata = dev_get_platdata(&pdev->dev); | |
| struct device_node *np = pdev->dev.of_node; | |
| if (np) { | |
| int gpio = of_get_named_gpio(np, "nxp,enable-gpio", 0); | |
| if (gpio < 0) { | |
| dev_err(&pdev->dev, "missing DT GPIO nxp,enable-gpio\n"); | |
| return gpio; | |
| } | |
| pdata = devm_kzalloc(&pdev->dev, | |
| sizeof(struct isp1704_charger_data), GFP_KERNEL); | |
| if (!pdata) { | |
| ret = -ENOMEM; | |
| goto fail0; | |
| } | |
| pdata->enable_gpio = gpio; | |
| dev_info(&pdev->dev, "init gpio %d\n", pdata->enable_gpio); | |
| ret = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio, | |
| GPIOF_OUT_INIT_HIGH, "isp1704_reset"); | |
| if (ret) { | |
| dev_err(&pdev->dev, "gpio request failed\n"); | |
| goto fail0; | |
| } | |
| } | |
| if (!pdata) { | |
| dev_err(&pdev->dev, "missing platform data!\n"); | |
| return -ENODEV; | |
| } | |
| isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL); | |
| if (!isp) | |
| return -ENOMEM; | |
| if (np) | |
| isp->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); | |
| else | |
| isp->phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); | |
| if (IS_ERR(isp->phy)) { | |
| ret = PTR_ERR(isp->phy); | |
| dev_err(&pdev->dev, "usb_get_phy failed\n"); | |
| goto fail0; | |
| } | |
| isp->dev = &pdev->dev; | |
| platform_set_drvdata(pdev, isp); | |
| isp1704_charger_set_power(isp, 1); | |
| ret = isp1704_test_ulpi(isp); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "isp1704_test_ulpi failed\n"); | |
| goto fail1; | |
| } | |
| isp->psy_desc.name = "isp1704"; | |
| isp->psy_desc.type = POWER_SUPPLY_TYPE_USB; | |
| isp->psy_desc.properties = power_props; | |
| isp->psy_desc.num_properties = ARRAY_SIZE(power_props); | |
| isp->psy_desc.get_property = isp1704_charger_get_property; | |
| psy_cfg.drv_data = isp; | |
| isp->psy = power_supply_register(isp->dev, &isp->psy_desc, &psy_cfg); | |
| if (IS_ERR(isp->psy)) { | |
| ret = PTR_ERR(isp->psy); | |
| dev_err(&pdev->dev, "power_supply_register failed\n"); | |
| goto fail1; | |
| } | |
| /* | |
| * REVISIT: using work in order to allow the usb notifications to be | |
| * made atomically in the future. | |
| */ | |
| INIT_WORK(&isp->work, isp1704_charger_work); | |
| isp->nb.notifier_call = isp1704_notifier_call; | |
| ret = usb_register_notifier(isp->phy, &isp->nb); | |
| if (ret) { | |
| dev_err(&pdev->dev, "usb_register_notifier failed\n"); | |
| goto fail2; | |
| } | |
| dev_info(isp->dev, "registered with product id %s\n", isp->model); | |
| /* | |
| * Taking over the D+ pullup. | |
| * | |
| * FIXME: The device will be disconnected if it was already | |
| * enumerated. The charger driver should be always loaded before any | |
| * gadget is loaded. | |
| */ | |
| if (isp->phy->otg->gadget) | |
| usb_gadget_disconnect(isp->phy->otg->gadget); | |
| if (isp->phy->last_event == USB_EVENT_NONE) | |
| isp1704_charger_set_power(isp, 0); | |
| /* Detect charger if VBUS is valid (the cable was already plugged). */ | |
| if (isp->phy->last_event == USB_EVENT_VBUS && | |
| !isp->phy->otg->default_a) | |
| schedule_work(&isp->work); | |
| return 0; | |
| fail2: | |
| power_supply_unregister(isp->psy); | |
| fail1: | |
| isp1704_charger_set_power(isp, 0); | |
| fail0: | |
| dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret); | |
| return ret; | |
| } | |
| static int isp1704_charger_remove(struct platform_device *pdev) | |
| { | |
| struct isp1704_charger *isp = platform_get_drvdata(pdev); | |
| usb_unregister_notifier(isp->phy, &isp->nb); | |
| power_supply_unregister(isp->psy); | |
| isp1704_charger_set_power(isp, 0); | |
| return 0; | |
| } | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id omap_isp1704_of_match[] = { | |
| { .compatible = "nxp,isp1704", }, | |
| { .compatible = "nxp,isp1707", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, omap_isp1704_of_match); | |
| #endif | |
| static struct platform_driver isp1704_charger_driver = { | |
| .driver = { | |
| .name = "isp1704_charger", | |
| .of_match_table = of_match_ptr(omap_isp1704_of_match), | |
| }, | |
| .probe = isp1704_charger_probe, | |
| .remove = isp1704_charger_remove, | |
| }; | |
| module_platform_driver(isp1704_charger_driver); | |
| MODULE_ALIAS("platform:isp1704_charger"); | |
| MODULE_AUTHOR("Nokia Corporation"); | |
| MODULE_DESCRIPTION("ISP170x USB Charger driver"); | |
| MODULE_LICENSE("GPL"); |