| /******************************************************************************* | |
| Intel 10 Gigabit PCI Express Linux driver | |
| Copyright(c) 1999 - 2016 Intel Corporation. | |
| This program is free software; you can redistribute it and/or modify it | |
| under the terms and conditions of the GNU General Public License, | |
| version 2, as published by the Free Software Foundation. | |
| This program is distributed in the hope it will be useful, but WITHOUT | |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| more details. | |
| You should have received a copy of the GNU General Public License along with | |
| this program; if not, write to the Free Software Foundation, Inc., | |
| 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
| The full GNU General Public License is included in this distribution in | |
| the file called "COPYING". | |
| Contact Information: | |
| Linux NICS <linux.nics@intel.com> | |
| e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
| *******************************************************************************/ | |
| #include "ixgbe.h" | |
| #include "ixgbe_sriov.h" | |
| #ifdef CONFIG_IXGBE_DCB | |
| /** | |
| * ixgbe_cache_ring_dcb_sriov - Descriptor ring to register mapping for SR-IOV | |
| * @adapter: board private structure to initialize | |
| * | |
| * Cache the descriptor ring offsets for SR-IOV to the assigned rings. It | |
| * will also try to cache the proper offsets if RSS/FCoE are enabled along | |
| * with VMDq. | |
| * | |
| **/ | |
| static bool ixgbe_cache_ring_dcb_sriov(struct ixgbe_adapter *adapter) | |
| { | |
| #ifdef IXGBE_FCOE | |
| struct ixgbe_ring_feature *fcoe = &adapter->ring_feature[RING_F_FCOE]; | |
| #endif /* IXGBE_FCOE */ | |
| struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ]; | |
| int i; | |
| u16 reg_idx; | |
| u8 tcs = netdev_get_num_tc(adapter->netdev); | |
| /* verify we have DCB queueing enabled before proceeding */ | |
| if (tcs <= 1) | |
| return false; | |
| /* verify we have VMDq enabled before proceeding */ | |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) | |
| return false; | |
| /* start at VMDq register offset for SR-IOV enabled setups */ | |
| reg_idx = vmdq->offset * __ALIGN_MASK(1, ~vmdq->mask); | |
| for (i = 0; i < adapter->num_rx_queues; i++, reg_idx++) { | |
| /* If we are greater than indices move to next pool */ | |
| if ((reg_idx & ~vmdq->mask) >= tcs) | |
| reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask); | |
| adapter->rx_ring[i]->reg_idx = reg_idx; | |
| } | |
| reg_idx = vmdq->offset * __ALIGN_MASK(1, ~vmdq->mask); | |
| for (i = 0; i < adapter->num_tx_queues; i++, reg_idx++) { | |
| /* If we are greater than indices move to next pool */ | |
| if ((reg_idx & ~vmdq->mask) >= tcs) | |
| reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask); | |
| adapter->tx_ring[i]->reg_idx = reg_idx; | |
| } | |
| #ifdef IXGBE_FCOE | |
| /* nothing to do if FCoE is disabled */ | |
| if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) | |
| return true; | |
| /* The work is already done if the FCoE ring is shared */ | |
| if (fcoe->offset < tcs) | |
| return true; | |
| /* The FCoE rings exist separately, we need to move their reg_idx */ | |
| if (fcoe->indices) { | |
| u16 queues_per_pool = __ALIGN_MASK(1, ~vmdq->mask); | |
| u8 fcoe_tc = ixgbe_fcoe_get_tc(adapter); | |
| reg_idx = (vmdq->offset + vmdq->indices) * queues_per_pool; | |
| for (i = fcoe->offset; i < adapter->num_rx_queues; i++) { | |
| reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask) + fcoe_tc; | |
| adapter->rx_ring[i]->reg_idx = reg_idx; | |
| reg_idx++; | |
| } | |
| reg_idx = (vmdq->offset + vmdq->indices) * queues_per_pool; | |
| for (i = fcoe->offset; i < adapter->num_tx_queues; i++) { | |
| reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask) + fcoe_tc; | |
| adapter->tx_ring[i]->reg_idx = reg_idx; | |
| reg_idx++; | |
| } | |
| } | |
| #endif /* IXGBE_FCOE */ | |
| return true; | |
| } | |
| /* ixgbe_get_first_reg_idx - Return first register index associated with ring */ | |
| static void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc, | |
| unsigned int *tx, unsigned int *rx) | |
| { | |
| struct net_device *dev = adapter->netdev; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u8 num_tcs = netdev_get_num_tc(dev); | |
| *tx = 0; | |
| *rx = 0; | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| /* TxQs/TC: 4 RxQs/TC: 8 */ | |
| *tx = tc << 2; /* 0, 4, 8, 12, 16, 20, 24, 28 */ | |
| *rx = tc << 3; /* 0, 8, 16, 24, 32, 40, 48, 56 */ | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| if (num_tcs > 4) { | |
| /* | |
| * TCs : TC0/1 TC2/3 TC4-7 | |
| * TxQs/TC: 32 16 8 | |
| * RxQs/TC: 16 16 16 | |
| */ | |
| *rx = tc << 4; | |
| if (tc < 3) | |
| *tx = tc << 5; /* 0, 32, 64 */ | |
| else if (tc < 5) | |
| *tx = (tc + 2) << 4; /* 80, 96 */ | |
| else | |
| *tx = (tc + 8) << 3; /* 104, 112, 120 */ | |
| } else { | |
| /* | |
| * TCs : TC0 TC1 TC2/3 | |
| * TxQs/TC: 64 32 16 | |
| * RxQs/TC: 32 32 32 | |
| */ | |
| *rx = tc << 5; | |
| if (tc < 2) | |
| *tx = tc << 6; /* 0, 64 */ | |
| else | |
| *tx = (tc + 4) << 4; /* 96, 112 */ | |
| } | |
| default: | |
| break; | |
| } | |
| } | |
| /** | |
| * ixgbe_cache_ring_dcb - Descriptor ring to register mapping for DCB | |
| * @adapter: board private structure to initialize | |
| * | |
| * Cache the descriptor ring offsets for DCB to the assigned rings. | |
| * | |
| **/ | |
| static bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter) | |
| { | |
| struct net_device *dev = adapter->netdev; | |
| unsigned int tx_idx, rx_idx; | |
| int tc, offset, rss_i, i; | |
| u8 num_tcs = netdev_get_num_tc(dev); | |
| /* verify we have DCB queueing enabled before proceeding */ | |
| if (num_tcs <= 1) | |
| return false; | |
| rss_i = adapter->ring_feature[RING_F_RSS].indices; | |
| for (tc = 0, offset = 0; tc < num_tcs; tc++, offset += rss_i) { | |
| ixgbe_get_first_reg_idx(adapter, tc, &tx_idx, &rx_idx); | |
| for (i = 0; i < rss_i; i++, tx_idx++, rx_idx++) { | |
| adapter->tx_ring[offset + i]->reg_idx = tx_idx; | |
| adapter->rx_ring[offset + i]->reg_idx = rx_idx; | |
| adapter->tx_ring[offset + i]->dcb_tc = tc; | |
| adapter->rx_ring[offset + i]->dcb_tc = tc; | |
| } | |
| } | |
| return true; | |
| } | |
| #endif | |
| /** | |
| * ixgbe_cache_ring_sriov - Descriptor ring to register mapping for sriov | |
| * @adapter: board private structure to initialize | |
| * | |
| * SR-IOV doesn't use any descriptor rings but changes the default if | |
| * no other mapping is used. | |
| * | |
| */ | |
| static bool ixgbe_cache_ring_sriov(struct ixgbe_adapter *adapter) | |
| { | |
| #ifdef IXGBE_FCOE | |
| struct ixgbe_ring_feature *fcoe = &adapter->ring_feature[RING_F_FCOE]; | |
| #endif /* IXGBE_FCOE */ | |
| struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ]; | |
| struct ixgbe_ring_feature *rss = &adapter->ring_feature[RING_F_RSS]; | |
| int i; | |
| u16 reg_idx; | |
| /* only proceed if VMDq is enabled */ | |
| if (!(adapter->flags & IXGBE_FLAG_VMDQ_ENABLED)) | |
| return false; | |
| /* start at VMDq register offset for SR-IOV enabled setups */ | |
| reg_idx = vmdq->offset * __ALIGN_MASK(1, ~vmdq->mask); | |
| for (i = 0; i < adapter->num_rx_queues; i++, reg_idx++) { | |
| #ifdef IXGBE_FCOE | |
| /* Allow first FCoE queue to be mapped as RSS */ | |
| if (fcoe->offset && (i > fcoe->offset)) | |
| break; | |
| #endif | |
| /* If we are greater than indices move to next pool */ | |
| if ((reg_idx & ~vmdq->mask) >= rss->indices) | |
| reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask); | |
| adapter->rx_ring[i]->reg_idx = reg_idx; | |
| } | |
| #ifdef IXGBE_FCOE | |
| /* FCoE uses a linear block of queues so just assigning 1:1 */ | |
| for (; i < adapter->num_rx_queues; i++, reg_idx++) | |
| adapter->rx_ring[i]->reg_idx = reg_idx; | |
| #endif | |
| reg_idx = vmdq->offset * __ALIGN_MASK(1, ~vmdq->mask); | |
| for (i = 0; i < adapter->num_tx_queues; i++, reg_idx++) { | |
| #ifdef IXGBE_FCOE | |
| /* Allow first FCoE queue to be mapped as RSS */ | |
| if (fcoe->offset && (i > fcoe->offset)) | |
| break; | |
| #endif | |
| /* If we are greater than indices move to next pool */ | |
| if ((reg_idx & rss->mask) >= rss->indices) | |
| reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask); | |
| adapter->tx_ring[i]->reg_idx = reg_idx; | |
| } | |
| #ifdef IXGBE_FCOE | |
| /* FCoE uses a linear block of queues so just assigning 1:1 */ | |
| for (; i < adapter->num_tx_queues; i++, reg_idx++) | |
| adapter->tx_ring[i]->reg_idx = reg_idx; | |
| #endif | |
| return true; | |
| } | |
| /** | |
| * ixgbe_cache_ring_rss - Descriptor ring to register mapping for RSS | |
| * @adapter: board private structure to initialize | |
| * | |
| * Cache the descriptor ring offsets for RSS to the assigned rings. | |
| * | |
| **/ | |
| static bool ixgbe_cache_ring_rss(struct ixgbe_adapter *adapter) | |
| { | |
| int i, reg_idx; | |
| for (i = 0; i < adapter->num_rx_queues; i++) | |
| adapter->rx_ring[i]->reg_idx = i; | |
| for (i = 0, reg_idx = 0; i < adapter->num_tx_queues; i++, reg_idx++) | |
| adapter->tx_ring[i]->reg_idx = reg_idx; | |
| for (i = 0; i < adapter->num_xdp_queues; i++, reg_idx++) | |
| adapter->xdp_ring[i]->reg_idx = reg_idx; | |
| return true; | |
| } | |
| /** | |
| * ixgbe_cache_ring_register - Descriptor ring to register mapping | |
| * @adapter: board private structure to initialize | |
| * | |
| * Once we know the feature-set enabled for the device, we'll cache | |
| * the register offset the descriptor ring is assigned to. | |
| * | |
| * Note, the order the various feature calls is important. It must start with | |
| * the "most" features enabled at the same time, then trickle down to the | |
| * least amount of features turned on at once. | |
| **/ | |
| static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) | |
| { | |
| /* start with default case */ | |
| adapter->rx_ring[0]->reg_idx = 0; | |
| adapter->tx_ring[0]->reg_idx = 0; | |
| #ifdef CONFIG_IXGBE_DCB | |
| if (ixgbe_cache_ring_dcb_sriov(adapter)) | |
| return; | |
| if (ixgbe_cache_ring_dcb(adapter)) | |
| return; | |
| #endif | |
| if (ixgbe_cache_ring_sriov(adapter)) | |
| return; | |
| ixgbe_cache_ring_rss(adapter); | |
| } | |
| static int ixgbe_xdp_queues(struct ixgbe_adapter *adapter) | |
| { | |
| return adapter->xdp_prog ? nr_cpu_ids : 0; | |
| } | |
| #define IXGBE_RSS_64Q_MASK 0x3F | |
| #define IXGBE_RSS_16Q_MASK 0xF | |
| #define IXGBE_RSS_8Q_MASK 0x7 | |
| #define IXGBE_RSS_4Q_MASK 0x3 | |
| #define IXGBE_RSS_2Q_MASK 0x1 | |
| #define IXGBE_RSS_DISABLED_MASK 0x0 | |
| #ifdef CONFIG_IXGBE_DCB | |
| /** | |
| * ixgbe_set_dcb_sriov_queues: Allocate queues for SR-IOV devices w/ DCB | |
| * @adapter: board private structure to initialize | |
| * | |
| * When SR-IOV (Single Root IO Virtualiztion) is enabled, allocate queues | |
| * and VM pools where appropriate. Also assign queues based on DCB | |
| * priorities and map accordingly.. | |
| * | |
| **/ | |
| static bool ixgbe_set_dcb_sriov_queues(struct ixgbe_adapter *adapter) | |
| { | |
| int i; | |
| u16 vmdq_i = adapter->ring_feature[RING_F_VMDQ].limit; | |
| u16 vmdq_m = 0; | |
| #ifdef IXGBE_FCOE | |
| u16 fcoe_i = 0; | |
| #endif | |
| u8 tcs = netdev_get_num_tc(adapter->netdev); | |
| /* verify we have DCB queueing enabled before proceeding */ | |
| if (tcs <= 1) | |
| return false; | |
| /* verify we have VMDq enabled before proceeding */ | |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) | |
| return false; | |
| /* Add starting offset to total pool count */ | |
| vmdq_i += adapter->ring_feature[RING_F_VMDQ].offset; | |
| /* 16 pools w/ 8 TC per pool */ | |
| if (tcs > 4) { | |
| vmdq_i = min_t(u16, vmdq_i, 16); | |
| vmdq_m = IXGBE_82599_VMDQ_8Q_MASK; | |
| /* 32 pools w/ 4 TC per pool */ | |
| } else { | |
| vmdq_i = min_t(u16, vmdq_i, 32); | |
| vmdq_m = IXGBE_82599_VMDQ_4Q_MASK; | |
| } | |
| #ifdef IXGBE_FCOE | |
| /* queues in the remaining pools are available for FCoE */ | |
| fcoe_i = (128 / __ALIGN_MASK(1, ~vmdq_m)) - vmdq_i; | |
| #endif | |
| /* remove the starting offset from the pool count */ | |
| vmdq_i -= adapter->ring_feature[RING_F_VMDQ].offset; | |
| /* save features for later use */ | |
| adapter->ring_feature[RING_F_VMDQ].indices = vmdq_i; | |
| adapter->ring_feature[RING_F_VMDQ].mask = vmdq_m; | |
| /* | |
| * We do not support DCB, VMDq, and RSS all simultaneously | |
| * so we will disable RSS since it is the lowest priority | |
| */ | |
| adapter->ring_feature[RING_F_RSS].indices = 1; | |
| adapter->ring_feature[RING_F_RSS].mask = IXGBE_RSS_DISABLED_MASK; | |
| /* disable ATR as it is not supported when VMDq is enabled */ | |
| adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; | |
| adapter->num_rx_pools = vmdq_i; | |
| adapter->num_rx_queues_per_pool = tcs; | |
| adapter->num_tx_queues = vmdq_i * tcs; | |
| adapter->num_xdp_queues = 0; | |
| adapter->num_rx_queues = vmdq_i * tcs; | |
| #ifdef IXGBE_FCOE | |
| if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { | |
| struct ixgbe_ring_feature *fcoe; | |
| fcoe = &adapter->ring_feature[RING_F_FCOE]; | |
| /* limit ourselves based on feature limits */ | |
| fcoe_i = min_t(u16, fcoe_i, fcoe->limit); | |
| if (fcoe_i) { | |
| /* alloc queues for FCoE separately */ | |
| fcoe->indices = fcoe_i; | |
| fcoe->offset = vmdq_i * tcs; | |
| /* add queues to adapter */ | |
| adapter->num_tx_queues += fcoe_i; | |
| adapter->num_rx_queues += fcoe_i; | |
| } else if (tcs > 1) { | |
| /* use queue belonging to FcoE TC */ | |
| fcoe->indices = 1; | |
| fcoe->offset = ixgbe_fcoe_get_tc(adapter); | |
| } else { | |
| adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; | |
| fcoe->indices = 0; | |
| fcoe->offset = 0; | |
| } | |
| } | |
| #endif /* IXGBE_FCOE */ | |
| /* configure TC to queue mapping */ | |
| for (i = 0; i < tcs; i++) | |
| netdev_set_tc_queue(adapter->netdev, i, 1, i); | |
| return true; | |
| } | |
| static bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter) | |
| { | |
| struct net_device *dev = adapter->netdev; | |
| struct ixgbe_ring_feature *f; | |
| int rss_i, rss_m, i; | |
| int tcs; | |
| /* Map queue offset and counts onto allocated tx queues */ | |
| tcs = netdev_get_num_tc(dev); | |
| /* verify we have DCB queueing enabled before proceeding */ | |
| if (tcs <= 1) | |
| return false; | |
| /* determine the upper limit for our current DCB mode */ | |
| rss_i = dev->num_tx_queues / tcs; | |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) { | |
| /* 8 TC w/ 4 queues per TC */ | |
| rss_i = min_t(u16, rss_i, 4); | |
| rss_m = IXGBE_RSS_4Q_MASK; | |
| } else if (tcs > 4) { | |
| /* 8 TC w/ 8 queues per TC */ | |
| rss_i = min_t(u16, rss_i, 8); | |
| rss_m = IXGBE_RSS_8Q_MASK; | |
| } else { | |
| /* 4 TC w/ 16 queues per TC */ | |
| rss_i = min_t(u16, rss_i, 16); | |
| rss_m = IXGBE_RSS_16Q_MASK; | |
| } | |
| /* set RSS mask and indices */ | |
| f = &adapter->ring_feature[RING_F_RSS]; | |
| rss_i = min_t(int, rss_i, f->limit); | |
| f->indices = rss_i; | |
| f->mask = rss_m; | |
| /* disable ATR as it is not supported when multiple TCs are enabled */ | |
| adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; | |
| #ifdef IXGBE_FCOE | |
| /* FCoE enabled queues require special configuration indexed | |
| * by feature specific indices and offset. Here we map FCoE | |
| * indices onto the DCB queue pairs allowing FCoE to own | |
| * configuration later. | |
| */ | |
| if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { | |
| u8 tc = ixgbe_fcoe_get_tc(adapter); | |
| f = &adapter->ring_feature[RING_F_FCOE]; | |
| f->indices = min_t(u16, rss_i, f->limit); | |
| f->offset = rss_i * tc; | |
| } | |
| #endif /* IXGBE_FCOE */ | |
| for (i = 0; i < tcs; i++) | |
| netdev_set_tc_queue(dev, i, rss_i, rss_i * i); | |
| adapter->num_tx_queues = rss_i * tcs; | |
| adapter->num_xdp_queues = 0; | |
| adapter->num_rx_queues = rss_i * tcs; | |
| return true; | |
| } | |
| #endif | |
| /** | |
| * ixgbe_set_sriov_queues - Allocate queues for SR-IOV devices | |
| * @adapter: board private structure to initialize | |
| * | |
| * When SR-IOV (Single Root IO Virtualiztion) is enabled, allocate queues | |
| * and VM pools where appropriate. If RSS is available, then also try and | |
| * enable RSS and map accordingly. | |
| * | |
| **/ | |
| static bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter) | |
| { | |
| u16 vmdq_i = adapter->ring_feature[RING_F_VMDQ].limit; | |
| u16 vmdq_m = 0; | |
| u16 rss_i = adapter->ring_feature[RING_F_RSS].limit; | |
| u16 rss_m = IXGBE_RSS_DISABLED_MASK; | |
| #ifdef IXGBE_FCOE | |
| u16 fcoe_i = 0; | |
| #endif | |
| bool pools = (find_first_zero_bit(&adapter->fwd_bitmask, 32) > 1); | |
| /* only proceed if SR-IOV is enabled */ | |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) | |
| return false; | |
| /* Add starting offset to total pool count */ | |
| vmdq_i += adapter->ring_feature[RING_F_VMDQ].offset; | |
| /* double check we are limited to maximum pools */ | |
| vmdq_i = min_t(u16, IXGBE_MAX_VMDQ_INDICES, vmdq_i); | |
| /* 64 pool mode with 2 queues per pool */ | |
| if ((vmdq_i > 32) || (vmdq_i > 16 && pools)) { | |
| vmdq_m = IXGBE_82599_VMDQ_2Q_MASK; | |
| rss_m = IXGBE_RSS_2Q_MASK; | |
| rss_i = min_t(u16, rss_i, 2); | |
| /* 32 pool mode with up to 4 queues per pool */ | |
| } else { | |
| vmdq_m = IXGBE_82599_VMDQ_4Q_MASK; | |
| rss_m = IXGBE_RSS_4Q_MASK; | |
| /* We can support 4, 2, or 1 queues */ | |
| rss_i = (rss_i > 3) ? 4 : (rss_i > 1) ? 2 : 1; | |
| } | |
| #ifdef IXGBE_FCOE | |
| /* queues in the remaining pools are available for FCoE */ | |
| fcoe_i = 128 - (vmdq_i * __ALIGN_MASK(1, ~vmdq_m)); | |
| #endif | |
| /* remove the starting offset from the pool count */ | |
| vmdq_i -= adapter->ring_feature[RING_F_VMDQ].offset; | |
| /* save features for later use */ | |
| adapter->ring_feature[RING_F_VMDQ].indices = vmdq_i; | |
| adapter->ring_feature[RING_F_VMDQ].mask = vmdq_m; | |
| /* limit RSS based on user input and save for later use */ | |
| adapter->ring_feature[RING_F_RSS].indices = rss_i; | |
| adapter->ring_feature[RING_F_RSS].mask = rss_m; | |
| adapter->num_rx_pools = vmdq_i; | |
| adapter->num_rx_queues_per_pool = rss_i; | |
| adapter->num_rx_queues = vmdq_i * rss_i; | |
| adapter->num_tx_queues = vmdq_i * rss_i; | |
| adapter->num_xdp_queues = 0; | |
| /* disable ATR as it is not supported when VMDq is enabled */ | |
| adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; | |
| #ifdef IXGBE_FCOE | |
| /* | |
| * FCoE can use rings from adjacent buffers to allow RSS | |
| * like behavior. To account for this we need to add the | |
| * FCoE indices to the total ring count. | |
| */ | |
| if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { | |
| struct ixgbe_ring_feature *fcoe; | |
| fcoe = &adapter->ring_feature[RING_F_FCOE]; | |
| /* limit ourselves based on feature limits */ | |
| fcoe_i = min_t(u16, fcoe_i, fcoe->limit); | |
| if (vmdq_i > 1 && fcoe_i) { | |
| /* alloc queues for FCoE separately */ | |
| fcoe->indices = fcoe_i; | |
| fcoe->offset = vmdq_i * rss_i; | |
| } else { | |
| /* merge FCoE queues with RSS queues */ | |
| fcoe_i = min_t(u16, fcoe_i + rss_i, num_online_cpus()); | |
| /* limit indices to rss_i if MSI-X is disabled */ | |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) | |
| fcoe_i = rss_i; | |
| /* attempt to reserve some queues for just FCoE */ | |
| fcoe->indices = min_t(u16, fcoe_i, fcoe->limit); | |
| fcoe->offset = fcoe_i - fcoe->indices; | |
| fcoe_i -= rss_i; | |
| } | |
| /* add queues to adapter */ | |
| adapter->num_tx_queues += fcoe_i; | |
| adapter->num_rx_queues += fcoe_i; | |
| } | |
| #endif | |
| return true; | |
| } | |
| /** | |
| * ixgbe_set_rss_queues - Allocate queues for RSS | |
| * @adapter: board private structure to initialize | |
| * | |
| * This is our "base" multiqueue mode. RSS (Receive Side Scaling) will try | |
| * to allocate one Rx queue per CPU, and if available, one Tx queue per CPU. | |
| * | |
| **/ | |
| static bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct ixgbe_ring_feature *f; | |
| u16 rss_i; | |
| /* set mask for 16 queue limit of RSS */ | |
| f = &adapter->ring_feature[RING_F_RSS]; | |
| rss_i = f->limit; | |
| f->indices = rss_i; | |
| if (hw->mac.type < ixgbe_mac_X550) | |
| f->mask = IXGBE_RSS_16Q_MASK; | |
| else | |
| f->mask = IXGBE_RSS_64Q_MASK; | |
| /* disable ATR by default, it will be configured below */ | |
| adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; | |
| /* | |
| * Use Flow Director in addition to RSS to ensure the best | |
| * distribution of flows across cores, even when an FDIR flow | |
| * isn't matched. | |
| */ | |
| if (rss_i > 1 && adapter->atr_sample_rate) { | |
| f = &adapter->ring_feature[RING_F_FDIR]; | |
| rss_i = f->indices = f->limit; | |
| if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) | |
| adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; | |
| } | |
| #ifdef IXGBE_FCOE | |
| /* | |
| * FCoE can exist on the same rings as standard network traffic | |
| * however it is preferred to avoid that if possible. In order | |
| * to get the best performance we allocate as many FCoE queues | |
| * as we can and we place them at the end of the ring array to | |
| * avoid sharing queues with standard RSS on systems with 24 or | |
| * more CPUs. | |
| */ | |
| if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { | |
| struct net_device *dev = adapter->netdev; | |
| u16 fcoe_i; | |
| f = &adapter->ring_feature[RING_F_FCOE]; | |
| /* merge FCoE queues with RSS queues */ | |
| fcoe_i = min_t(u16, f->limit + rss_i, num_online_cpus()); | |
| fcoe_i = min_t(u16, fcoe_i, dev->num_tx_queues); | |
| /* limit indices to rss_i if MSI-X is disabled */ | |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) | |
| fcoe_i = rss_i; | |
| /* attempt to reserve some queues for just FCoE */ | |
| f->indices = min_t(u16, fcoe_i, f->limit); | |
| f->offset = fcoe_i - f->indices; | |
| rss_i = max_t(u16, fcoe_i, rss_i); | |
| } | |
| #endif /* IXGBE_FCOE */ | |
| adapter->num_rx_queues = rss_i; | |
| adapter->num_tx_queues = rss_i; | |
| adapter->num_xdp_queues = ixgbe_xdp_queues(adapter); | |
| return true; | |
| } | |
| /** | |
| * ixgbe_set_num_queues - Allocate queues for device, feature dependent | |
| * @adapter: board private structure to initialize | |
| * | |
| * This is the top level queue allocation routine. The order here is very | |
| * important, starting with the "most" number of features turned on at once, | |
| * and ending with the smallest set of features. This way large combinations | |
| * can be allocated if they're turned on, and smaller combinations are the | |
| * fallthrough conditions. | |
| * | |
| **/ | |
| static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter) | |
| { | |
| /* Start with base case */ | |
| adapter->num_rx_queues = 1; | |
| adapter->num_tx_queues = 1; | |
| adapter->num_xdp_queues = 0; | |
| adapter->num_rx_pools = adapter->num_rx_queues; | |
| adapter->num_rx_queues_per_pool = 1; | |
| #ifdef CONFIG_IXGBE_DCB | |
| if (ixgbe_set_dcb_sriov_queues(adapter)) | |
| return; | |
| if (ixgbe_set_dcb_queues(adapter)) | |
| return; | |
| #endif | |
| if (ixgbe_set_sriov_queues(adapter)) | |
| return; | |
| ixgbe_set_rss_queues(adapter); | |
| } | |
| /** | |
| * ixgbe_acquire_msix_vectors - acquire MSI-X vectors | |
| * @adapter: board private structure | |
| * | |
| * Attempts to acquire a suitable range of MSI-X vector interrupts. Will | |
| * return a negative error code if unable to acquire MSI-X vectors for any | |
| * reason. | |
| */ | |
| static int ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int i, vectors, vector_threshold; | |
| /* We start by asking for one vector per queue pair with XDP queues | |
| * being stacked with TX queues. | |
| */ | |
| vectors = max(adapter->num_rx_queues, adapter->num_tx_queues); | |
| vectors = max(vectors, adapter->num_xdp_queues); | |
| /* It is easy to be greedy for MSI-X vectors. However, it really | |
| * doesn't do much good if we have a lot more vectors than CPUs. We'll | |
| * be somewhat conservative and only ask for (roughly) the same number | |
| * of vectors as there are CPUs. | |
| */ | |
| vectors = min_t(int, vectors, num_online_cpus()); | |
| /* Some vectors are necessary for non-queue interrupts */ | |
| vectors += NON_Q_VECTORS; | |
| /* Hardware can only support a maximum of hw.mac->max_msix_vectors. | |
| * With features such as RSS and VMDq, we can easily surpass the | |
| * number of Rx and Tx descriptor queues supported by our device. | |
| * Thus, we cap the maximum in the rare cases where the CPU count also | |
| * exceeds our vector limit | |
| */ | |
| vectors = min_t(int, vectors, hw->mac.max_msix_vectors); | |
| /* We want a minimum of two MSI-X vectors for (1) a TxQ[0] + RxQ[0] | |
| * handler, and (2) an Other (Link Status Change, etc.) handler. | |
| */ | |
| vector_threshold = MIN_MSIX_COUNT; | |
| adapter->msix_entries = kcalloc(vectors, | |
| sizeof(struct msix_entry), | |
| GFP_KERNEL); | |
| if (!adapter->msix_entries) | |
| return -ENOMEM; | |
| for (i = 0; i < vectors; i++) | |
| adapter->msix_entries[i].entry = i; | |
| vectors = pci_enable_msix_range(adapter->pdev, adapter->msix_entries, | |
| vector_threshold, vectors); | |
| if (vectors < 0) { | |
| /* A negative count of allocated vectors indicates an error in | |
| * acquiring within the specified range of MSI-X vectors | |
| */ | |
| e_dev_warn("Failed to allocate MSI-X interrupts. Err: %d\n", | |
| vectors); | |
| adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; | |
| kfree(adapter->msix_entries); | |
| adapter->msix_entries = NULL; | |
| return vectors; | |
| } | |
| /* we successfully allocated some number of vectors within our | |
| * requested range. | |
| */ | |
| adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; | |
| /* Adjust for only the vectors we'll use, which is minimum | |
| * of max_q_vectors, or the number of vectors we were allocated. | |
| */ | |
| vectors -= NON_Q_VECTORS; | |
| adapter->num_q_vectors = min_t(int, vectors, adapter->max_q_vectors); | |
| return 0; | |
| } | |
| static void ixgbe_add_ring(struct ixgbe_ring *ring, | |
| struct ixgbe_ring_container *head) | |
| { | |
| ring->next = head->ring; | |
| head->ring = ring; | |
| head->count++; | |
| } | |
| /** | |
| * ixgbe_alloc_q_vector - Allocate memory for a single interrupt vector | |
| * @adapter: board private structure to initialize | |
| * @v_count: q_vectors allocated on adapter, used for ring interleaving | |
| * @v_idx: index of vector in adapter struct | |
| * @txr_count: total number of Tx rings to allocate | |
| * @txr_idx: index of first Tx ring to allocate | |
| * @xdp_count: total number of XDP rings to allocate | |
| * @xdp_idx: index of first XDP ring to allocate | |
| * @rxr_count: total number of Rx rings to allocate | |
| * @rxr_idx: index of first Rx ring to allocate | |
| * | |
| * We allocate one q_vector. If allocation fails we return -ENOMEM. | |
| **/ | |
| static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, | |
| int v_count, int v_idx, | |
| int txr_count, int txr_idx, | |
| int xdp_count, int xdp_idx, | |
| int rxr_count, int rxr_idx) | |
| { | |
| struct ixgbe_q_vector *q_vector; | |
| struct ixgbe_ring *ring; | |
| int node = NUMA_NO_NODE; | |
| int cpu = -1; | |
| int ring_count, size; | |
| u8 tcs = netdev_get_num_tc(adapter->netdev); | |
| ring_count = txr_count + rxr_count + xdp_count; | |
| size = sizeof(struct ixgbe_q_vector) + | |
| (sizeof(struct ixgbe_ring) * ring_count); | |
| /* customize cpu for Flow Director mapping */ | |
| if ((tcs <= 1) && !(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) { | |
| u16 rss_i = adapter->ring_feature[RING_F_RSS].indices; | |
| if (rss_i > 1 && adapter->atr_sample_rate) { | |
| if (cpu_online(v_idx)) { | |
| cpu = v_idx; | |
| node = cpu_to_node(cpu); | |
| } | |
| } | |
| } | |
| /* allocate q_vector and rings */ | |
| q_vector = kzalloc_node(size, GFP_KERNEL, node); | |
| if (!q_vector) | |
| q_vector = kzalloc(size, GFP_KERNEL); | |
| if (!q_vector) | |
| return -ENOMEM; | |
| /* setup affinity mask and node */ | |
| if (cpu != -1) | |
| cpumask_set_cpu(cpu, &q_vector->affinity_mask); | |
| q_vector->numa_node = node; | |
| #ifdef CONFIG_IXGBE_DCA | |
| /* initialize CPU for DCA */ | |
| q_vector->cpu = -1; | |
| #endif | |
| /* initialize NAPI */ | |
| netif_napi_add(adapter->netdev, &q_vector->napi, | |
| ixgbe_poll, 64); | |
| /* tie q_vector and adapter together */ | |
| adapter->q_vector[v_idx] = q_vector; | |
| q_vector->adapter = adapter; | |
| q_vector->v_idx = v_idx; | |
| /* initialize work limits */ | |
| q_vector->tx.work_limit = adapter->tx_work_limit; | |
| /* initialize pointer to rings */ | |
| ring = q_vector->ring; | |
| /* intialize ITR */ | |
| if (txr_count && !rxr_count) { | |
| /* tx only vector */ | |
| if (adapter->tx_itr_setting == 1) | |
| q_vector->itr = IXGBE_12K_ITR; | |
| else | |
| q_vector->itr = adapter->tx_itr_setting; | |
| } else { | |
| /* rx or rx/tx vector */ | |
| if (adapter->rx_itr_setting == 1) | |
| q_vector->itr = IXGBE_20K_ITR; | |
| else | |
| q_vector->itr = adapter->rx_itr_setting; | |
| } | |
| while (txr_count) { | |
| /* assign generic ring traits */ | |
| ring->dev = &adapter->pdev->dev; | |
| ring->netdev = adapter->netdev; | |
| /* configure backlink on ring */ | |
| ring->q_vector = q_vector; | |
| /* update q_vector Tx values */ | |
| ixgbe_add_ring(ring, &q_vector->tx); | |
| /* apply Tx specific ring traits */ | |
| ring->count = adapter->tx_ring_count; | |
| if (adapter->num_rx_pools > 1) | |
| ring->queue_index = | |
| txr_idx % adapter->num_rx_queues_per_pool; | |
| else | |
| ring->queue_index = txr_idx; | |
| /* assign ring to adapter */ | |
| adapter->tx_ring[txr_idx] = ring; | |
| /* update count and index */ | |
| txr_count--; | |
| txr_idx += v_count; | |
| /* push pointer to next ring */ | |
| ring++; | |
| } | |
| while (xdp_count) { | |
| /* assign generic ring traits */ | |
| ring->dev = &adapter->pdev->dev; | |
| ring->netdev = adapter->netdev; | |
| /* configure backlink on ring */ | |
| ring->q_vector = q_vector; | |
| /* update q_vector Tx values */ | |
| ixgbe_add_ring(ring, &q_vector->tx); | |
| /* apply Tx specific ring traits */ | |
| ring->count = adapter->tx_ring_count; | |
| ring->queue_index = xdp_idx; | |
| set_ring_xdp(ring); | |
| /* assign ring to adapter */ | |
| adapter->xdp_ring[xdp_idx] = ring; | |
| /* update count and index */ | |
| xdp_count--; | |
| xdp_idx++; | |
| /* push pointer to next ring */ | |
| ring++; | |
| } | |
| while (rxr_count) { | |
| /* assign generic ring traits */ | |
| ring->dev = &adapter->pdev->dev; | |
| ring->netdev = adapter->netdev; | |
| /* configure backlink on ring */ | |
| ring->q_vector = q_vector; | |
| /* update q_vector Rx values */ | |
| ixgbe_add_ring(ring, &q_vector->rx); | |
| /* | |
| * 82599 errata, UDP frames with a 0 checksum | |
| * can be marked as checksum errors. | |
| */ | |
| if (adapter->hw.mac.type == ixgbe_mac_82599EB) | |
| set_bit(__IXGBE_RX_CSUM_UDP_ZERO_ERR, &ring->state); | |
| #ifdef IXGBE_FCOE | |
| if (adapter->netdev->features & NETIF_F_FCOE_MTU) { | |
| struct ixgbe_ring_feature *f; | |
| f = &adapter->ring_feature[RING_F_FCOE]; | |
| if ((rxr_idx >= f->offset) && | |
| (rxr_idx < f->offset + f->indices)) | |
| set_bit(__IXGBE_RX_FCOE, &ring->state); | |
| } | |
| #endif /* IXGBE_FCOE */ | |
| /* apply Rx specific ring traits */ | |
| ring->count = adapter->rx_ring_count; | |
| if (adapter->num_rx_pools > 1) | |
| ring->queue_index = | |
| rxr_idx % adapter->num_rx_queues_per_pool; | |
| else | |
| ring->queue_index = rxr_idx; | |
| /* assign ring to adapter */ | |
| adapter->rx_ring[rxr_idx] = ring; | |
| /* update count and index */ | |
| rxr_count--; | |
| rxr_idx += v_count; | |
| /* push pointer to next ring */ | |
| ring++; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_free_q_vector - Free memory allocated for specific interrupt vector | |
| * @adapter: board private structure to initialize | |
| * @v_idx: Index of vector to be freed | |
| * | |
| * This function frees the memory allocated to the q_vector. In addition if | |
| * NAPI is enabled it will delete any references to the NAPI struct prior | |
| * to freeing the q_vector. | |
| **/ | |
| static void ixgbe_free_q_vector(struct ixgbe_adapter *adapter, int v_idx) | |
| { | |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[v_idx]; | |
| struct ixgbe_ring *ring; | |
| ixgbe_for_each_ring(ring, q_vector->tx) { | |
| if (ring_is_xdp(ring)) | |
| adapter->xdp_ring[ring->queue_index] = NULL; | |
| else | |
| adapter->tx_ring[ring->queue_index] = NULL; | |
| } | |
| ixgbe_for_each_ring(ring, q_vector->rx) | |
| adapter->rx_ring[ring->queue_index] = NULL; | |
| adapter->q_vector[v_idx] = NULL; | |
| napi_hash_del(&q_vector->napi); | |
| netif_napi_del(&q_vector->napi); | |
| /* | |
| * ixgbe_get_stats64() might access the rings on this vector, | |
| * we must wait a grace period before freeing it. | |
| */ | |
| kfree_rcu(q_vector, rcu); | |
| } | |
| /** | |
| * ixgbe_alloc_q_vectors - Allocate memory for interrupt vectors | |
| * @adapter: board private structure to initialize | |
| * | |
| * We allocate one q_vector per queue interrupt. If allocation fails we | |
| * return -ENOMEM. | |
| **/ | |
| static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter) | |
| { | |
| int q_vectors = adapter->num_q_vectors; | |
| int rxr_remaining = adapter->num_rx_queues; | |
| int txr_remaining = adapter->num_tx_queues; | |
| int xdp_remaining = adapter->num_xdp_queues; | |
| int rxr_idx = 0, txr_idx = 0, xdp_idx = 0, v_idx = 0; | |
| int err; | |
| /* only one q_vector if MSI-X is disabled. */ | |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) | |
| q_vectors = 1; | |
| if (q_vectors >= (rxr_remaining + txr_remaining + xdp_remaining)) { | |
| for (; rxr_remaining; v_idx++) { | |
| err = ixgbe_alloc_q_vector(adapter, q_vectors, v_idx, | |
| 0, 0, 0, 0, 1, rxr_idx); | |
| if (err) | |
| goto err_out; | |
| /* update counts and index */ | |
| rxr_remaining--; | |
| rxr_idx++; | |
| } | |
| } | |
| for (; v_idx < q_vectors; v_idx++) { | |
| int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx); | |
| int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx); | |
| int xqpv = DIV_ROUND_UP(xdp_remaining, q_vectors - v_idx); | |
| err = ixgbe_alloc_q_vector(adapter, q_vectors, v_idx, | |
| tqpv, txr_idx, | |
| xqpv, xdp_idx, | |
| rqpv, rxr_idx); | |
| if (err) | |
| goto err_out; | |
| /* update counts and index */ | |
| rxr_remaining -= rqpv; | |
| txr_remaining -= tqpv; | |
| xdp_remaining -= xqpv; | |
| rxr_idx++; | |
| txr_idx++; | |
| xdp_idx += xqpv; | |
| } | |
| return 0; | |
| err_out: | |
| adapter->num_tx_queues = 0; | |
| adapter->num_xdp_queues = 0; | |
| adapter->num_rx_queues = 0; | |
| adapter->num_q_vectors = 0; | |
| while (v_idx--) | |
| ixgbe_free_q_vector(adapter, v_idx); | |
| return -ENOMEM; | |
| } | |
| /** | |
| * ixgbe_free_q_vectors - Free memory allocated for interrupt vectors | |
| * @adapter: board private structure to initialize | |
| * | |
| * This function frees the memory allocated to the q_vectors. In addition if | |
| * NAPI is enabled it will delete any references to the NAPI struct prior | |
| * to freeing the q_vector. | |
| **/ | |
| static void ixgbe_free_q_vectors(struct ixgbe_adapter *adapter) | |
| { | |
| int v_idx = adapter->num_q_vectors; | |
| adapter->num_tx_queues = 0; | |
| adapter->num_xdp_queues = 0; | |
| adapter->num_rx_queues = 0; | |
| adapter->num_q_vectors = 0; | |
| while (v_idx--) | |
| ixgbe_free_q_vector(adapter, v_idx); | |
| } | |
| static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter) | |
| { | |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { | |
| adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; | |
| pci_disable_msix(adapter->pdev); | |
| kfree(adapter->msix_entries); | |
| adapter->msix_entries = NULL; | |
| } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { | |
| adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED; | |
| pci_disable_msi(adapter->pdev); | |
| } | |
| } | |
| /** | |
| * ixgbe_set_interrupt_capability - set MSI-X or MSI if supported | |
| * @adapter: board private structure to initialize | |
| * | |
| * Attempt to configure the interrupts using the best available | |
| * capabilities of the hardware and the kernel. | |
| **/ | |
| static void ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter) | |
| { | |
| int err; | |
| /* We will try to get MSI-X interrupts first */ | |
| if (!ixgbe_acquire_msix_vectors(adapter)) | |
| return; | |
| /* At this point, we do not have MSI-X capabilities. We need to | |
| * reconfigure or disable various features which require MSI-X | |
| * capability. | |
| */ | |
| /* Disable DCB unless we only have a single traffic class */ | |
| if (netdev_get_num_tc(adapter->netdev) > 1) { | |
| e_dev_warn("Number of DCB TCs exceeds number of available queues. Disabling DCB support.\n"); | |
| netdev_reset_tc(adapter->netdev); | |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) | |
| adapter->hw.fc.requested_mode = adapter->last_lfc_mode; | |
| adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED; | |
| adapter->temp_dcb_cfg.pfc_mode_enable = false; | |
| adapter->dcb_cfg.pfc_mode_enable = false; | |
| } | |
| adapter->dcb_cfg.num_tcs.pg_tcs = 1; | |
| adapter->dcb_cfg.num_tcs.pfc_tcs = 1; | |
| /* Disable SR-IOV support */ | |
| e_dev_warn("Disabling SR-IOV support\n"); | |
| ixgbe_disable_sriov(adapter); | |
| /* Disable RSS */ | |
| e_dev_warn("Disabling RSS support\n"); | |
| adapter->ring_feature[RING_F_RSS].limit = 1; | |
| /* recalculate number of queues now that many features have been | |
| * changed or disabled. | |
| */ | |
| ixgbe_set_num_queues(adapter); | |
| adapter->num_q_vectors = 1; | |
| err = pci_enable_msi(adapter->pdev); | |
| if (err) | |
| e_dev_warn("Failed to allocate MSI interrupt, falling back to legacy. Error: %d\n", | |
| err); | |
| else | |
| adapter->flags |= IXGBE_FLAG_MSI_ENABLED; | |
| } | |
| /** | |
| * ixgbe_init_interrupt_scheme - Determine proper interrupt scheme | |
| * @adapter: board private structure to initialize | |
| * | |
| * We determine which interrupt scheme to use based on... | |
| * - Kernel support (MSI, MSI-X) | |
| * - which can be user-defined (via MODULE_PARAM) | |
| * - Hardware queue count (num_*_queues) | |
| * - defined by miscellaneous hardware support/features (RSS, etc.) | |
| **/ | |
| int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) | |
| { | |
| int err; | |
| /* Number of supported queues */ | |
| ixgbe_set_num_queues(adapter); | |
| /* Set interrupt mode */ | |
| ixgbe_set_interrupt_capability(adapter); | |
| err = ixgbe_alloc_q_vectors(adapter); | |
| if (err) { | |
| e_dev_err("Unable to allocate memory for queue vectors\n"); | |
| goto err_alloc_q_vectors; | |
| } | |
| ixgbe_cache_ring_register(adapter); | |
| e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u XDP Queue count = %u\n", | |
| (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled", | |
| adapter->num_rx_queues, adapter->num_tx_queues, | |
| adapter->num_xdp_queues); | |
| set_bit(__IXGBE_DOWN, &adapter->state); | |
| return 0; | |
| err_alloc_q_vectors: | |
| ixgbe_reset_interrupt_capability(adapter); | |
| return err; | |
| } | |
| /** | |
| * ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings | |
| * @adapter: board private structure to clear interrupt scheme on | |
| * | |
| * We go through and clear interrupt specific resources and reset the structure | |
| * to pre-load conditions | |
| **/ | |
| void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter) | |
| { | |
| adapter->num_tx_queues = 0; | |
| adapter->num_xdp_queues = 0; | |
| adapter->num_rx_queues = 0; | |
| ixgbe_free_q_vectors(adapter); | |
| ixgbe_reset_interrupt_capability(adapter); | |
| } | |
| void ixgbe_tx_ctxtdesc(struct ixgbe_ring *tx_ring, u32 vlan_macip_lens, | |
| u32 fcoe_sof_eof, u32 type_tucmd, u32 mss_l4len_idx) | |
| { | |
| struct ixgbe_adv_tx_context_desc *context_desc; | |
| u16 i = tx_ring->next_to_use; | |
| context_desc = IXGBE_TX_CTXTDESC(tx_ring, i); | |
| i++; | |
| tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; | |
| /* set bits to identify this as an advanced context descriptor */ | |
| type_tucmd |= IXGBE_TXD_CMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT; | |
| context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens); | |
| context_desc->seqnum_seed = cpu_to_le32(fcoe_sof_eof); | |
| context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd); | |
| context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); | |
| } | |