| /* | |
| * rcar_du_crtc.c -- R-Car Display Unit CRTCs | |
| * | |
| * Copyright (C) 2016 Laurent Pinchart | |
| * Copyright (C) 2016 Renesas Electronics Corporation | |
| * | |
| * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| */ | |
| #include <linux/backlight.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/module.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/slab.h> | |
| #include <drm/drmP.h> | |
| #include <drm/drm_crtc.h> | |
| #include <drm/drm_panel.h> | |
| #include <video/display_timing.h> | |
| #include <video/of_display_timing.h> | |
| #include <video/videomode.h> | |
| struct panel_lvds { | |
| struct drm_panel panel; | |
| struct device *dev; | |
| const char *label; | |
| unsigned int width; | |
| unsigned int height; | |
| struct videomode video_mode; | |
| unsigned int bus_format; | |
| bool data_mirror; | |
| struct backlight_device *backlight; | |
| struct gpio_desc *enable_gpio; | |
| struct gpio_desc *reset_gpio; | |
| }; | |
| static inline struct panel_lvds *to_panel_lvds(struct drm_panel *panel) | |
| { | |
| return container_of(panel, struct panel_lvds, panel); | |
| } | |
| static int panel_lvds_disable(struct drm_panel *panel) | |
| { | |
| struct panel_lvds *lvds = to_panel_lvds(panel); | |
| if (lvds->backlight) { | |
| lvds->backlight->props.power = FB_BLANK_POWERDOWN; | |
| lvds->backlight->props.state |= BL_CORE_FBBLANK; | |
| backlight_update_status(lvds->backlight); | |
| } | |
| return 0; | |
| } | |
| static int panel_lvds_unprepare(struct drm_panel *panel) | |
| { | |
| struct panel_lvds *lvds = to_panel_lvds(panel); | |
| if (lvds->enable_gpio) | |
| gpiod_set_value_cansleep(lvds->enable_gpio, 0); | |
| return 0; | |
| } | |
| static int panel_lvds_prepare(struct drm_panel *panel) | |
| { | |
| struct panel_lvds *lvds = to_panel_lvds(panel); | |
| if (lvds->enable_gpio) | |
| gpiod_set_value_cansleep(lvds->enable_gpio, 1); | |
| return 0; | |
| } | |
| static int panel_lvds_enable(struct drm_panel *panel) | |
| { | |
| struct panel_lvds *lvds = to_panel_lvds(panel); | |
| if (lvds->backlight) { | |
| lvds->backlight->props.state &= ~BL_CORE_FBBLANK; | |
| lvds->backlight->props.power = FB_BLANK_UNBLANK; | |
| backlight_update_status(lvds->backlight); | |
| } | |
| return 0; | |
| } | |
| static int panel_lvds_get_modes(struct drm_panel *panel) | |
| { | |
| struct panel_lvds *lvds = to_panel_lvds(panel); | |
| struct drm_connector *connector = lvds->panel.connector; | |
| struct drm_display_mode *mode; | |
| mode = drm_mode_create(lvds->panel.drm); | |
| if (!mode) | |
| return 0; | |
| drm_display_mode_from_videomode(&lvds->video_mode, mode); | |
| mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; | |
| drm_mode_probed_add(connector, mode); | |
| connector->display_info.width_mm = lvds->width; | |
| connector->display_info.height_mm = lvds->height; | |
| drm_display_info_set_bus_formats(&connector->display_info, | |
| &lvds->bus_format, 1); | |
| connector->display_info.bus_flags = lvds->data_mirror | |
| ? DRM_BUS_FLAG_DATA_LSB_TO_MSB | |
| : DRM_BUS_FLAG_DATA_MSB_TO_LSB; | |
| return 1; | |
| } | |
| static const struct drm_panel_funcs panel_lvds_funcs = { | |
| .disable = panel_lvds_disable, | |
| .unprepare = panel_lvds_unprepare, | |
| .prepare = panel_lvds_prepare, | |
| .enable = panel_lvds_enable, | |
| .get_modes = panel_lvds_get_modes, | |
| }; | |
| static int panel_lvds_parse_dt(struct panel_lvds *lvds) | |
| { | |
| struct device_node *np = lvds->dev->of_node; | |
| struct display_timing timing; | |
| const char *mapping; | |
| int ret; | |
| ret = of_get_display_timing(np, "panel-timing", &timing); | |
| if (ret < 0) | |
| return ret; | |
| videomode_from_timing(&timing, &lvds->video_mode); | |
| ret = of_property_read_u32(np, "width-mm", &lvds->width); | |
| if (ret < 0) { | |
| dev_err(lvds->dev, "%pOF: invalid or missing %s DT property\n", | |
| np, "width-mm"); | |
| return -ENODEV; | |
| } | |
| ret = of_property_read_u32(np, "height-mm", &lvds->height); | |
| if (ret < 0) { | |
| dev_err(lvds->dev, "%pOF: invalid or missing %s DT property\n", | |
| np, "height-mm"); | |
| return -ENODEV; | |
| } | |
| of_property_read_string(np, "label", &lvds->label); | |
| ret = of_property_read_string(np, "data-mapping", &mapping); | |
| if (ret < 0) { | |
| dev_err(lvds->dev, "%pOF: invalid or missing %s DT property\n", | |
| np, "data-mapping"); | |
| return -ENODEV; | |
| } | |
| if (!strcmp(mapping, "jeida-18")) { | |
| lvds->bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG; | |
| } else if (!strcmp(mapping, "jeida-24")) { | |
| lvds->bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; | |
| } else if (!strcmp(mapping, "vesa-24")) { | |
| lvds->bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG; | |
| } else { | |
| dev_err(lvds->dev, "%pOF: invalid or missing %s DT property\n", | |
| np, "data-mapping"); | |
| return -EINVAL; | |
| } | |
| lvds->data_mirror = of_property_read_bool(np, "data-mirror"); | |
| return 0; | |
| } | |
| static int panel_lvds_probe(struct platform_device *pdev) | |
| { | |
| struct panel_lvds *lvds; | |
| struct device_node *np; | |
| int ret; | |
| lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL); | |
| if (!lvds) | |
| return -ENOMEM; | |
| lvds->dev = &pdev->dev; | |
| ret = panel_lvds_parse_dt(lvds); | |
| if (ret < 0) | |
| return ret; | |
| /* Get GPIOs and backlight controller. */ | |
| lvds->enable_gpio = devm_gpiod_get_optional(lvds->dev, "enable", | |
| GPIOD_OUT_LOW); | |
| if (IS_ERR(lvds->enable_gpio)) { | |
| ret = PTR_ERR(lvds->enable_gpio); | |
| dev_err(lvds->dev, "failed to request %s GPIO: %d\n", | |
| "enable", ret); | |
| return ret; | |
| } | |
| lvds->reset_gpio = devm_gpiod_get_optional(lvds->dev, "reset", | |
| GPIOD_OUT_HIGH); | |
| if (IS_ERR(lvds->reset_gpio)) { | |
| ret = PTR_ERR(lvds->reset_gpio); | |
| dev_err(lvds->dev, "failed to request %s GPIO: %d\n", | |
| "reset", ret); | |
| return ret; | |
| } | |
| np = of_parse_phandle(lvds->dev->of_node, "backlight", 0); | |
| if (np) { | |
| lvds->backlight = of_find_backlight_by_node(np); | |
| of_node_put(np); | |
| if (!lvds->backlight) | |
| return -EPROBE_DEFER; | |
| } | |
| /* | |
| * TODO: Handle all power supplies specified in the DT node in a generic | |
| * way for panels that don't care about power supply ordering. LVDS | |
| * panels that require a specific power sequence will need a dedicated | |
| * driver. | |
| */ | |
| /* Register the panel. */ | |
| drm_panel_init(&lvds->panel); | |
| lvds->panel.dev = lvds->dev; | |
| lvds->panel.funcs = &panel_lvds_funcs; | |
| ret = drm_panel_add(&lvds->panel); | |
| if (ret < 0) | |
| goto error; | |
| dev_set_drvdata(lvds->dev, lvds); | |
| return 0; | |
| error: | |
| put_device(&lvds->backlight->dev); | |
| return ret; | |
| } | |
| static int panel_lvds_remove(struct platform_device *pdev) | |
| { | |
| struct panel_lvds *lvds = dev_get_drvdata(&pdev->dev); | |
| drm_panel_detach(&lvds->panel); | |
| drm_panel_remove(&lvds->panel); | |
| panel_lvds_disable(&lvds->panel); | |
| if (lvds->backlight) | |
| put_device(&lvds->backlight->dev); | |
| return 0; | |
| } | |
| static const struct of_device_id panel_lvds_of_table[] = { | |
| { .compatible = "panel-lvds", }, | |
| { /* Sentinel */ }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, panel_lvds_of_table); | |
| static struct platform_driver panel_lvds_driver = { | |
| .probe = panel_lvds_probe, | |
| .remove = panel_lvds_remove, | |
| .driver = { | |
| .name = "panel-lvds", | |
| .of_match_table = panel_lvds_of_table, | |
| }, | |
| }; | |
| module_platform_driver(panel_lvds_driver); | |
| MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); | |
| MODULE_DESCRIPTION("LVDS Panel Driver"); | |
| MODULE_LICENSE("GPL"); |