| /* | |
| * GHES/EDAC Linux driver | |
| * | |
| * This file may be distributed under the terms of the GNU General Public | |
| * License version 2. | |
| * | |
| * Copyright (c) 2013 by Mauro Carvalho Chehab | |
| * | |
| * Red Hat Inc. http://www.redhat.com | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <acpi/ghes.h> | |
| #include <linux/edac.h> | |
| #include <linux/dmi.h> | |
| #include "edac_module.h" | |
| #include <ras/ras_event.h> | |
| struct ghes_edac_pvt { | |
| struct list_head list; | |
| struct ghes *ghes; | |
| struct mem_ctl_info *mci; | |
| /* Buffers for the error handling routine */ | |
| char detail_location[240]; | |
| char other_detail[160]; | |
| char msg[80]; | |
| }; | |
| static LIST_HEAD(ghes_reglist); | |
| static DEFINE_MUTEX(ghes_edac_lock); | |
| static int ghes_edac_mc_num; | |
| /* Memory Device - Type 17 of SMBIOS spec */ | |
| struct memdev_dmi_entry { | |
| u8 type; | |
| u8 length; | |
| u16 handle; | |
| u16 phys_mem_array_handle; | |
| u16 mem_err_info_handle; | |
| u16 total_width; | |
| u16 data_width; | |
| u16 size; | |
| u8 form_factor; | |
| u8 device_set; | |
| u8 device_locator; | |
| u8 bank_locator; | |
| u8 memory_type; | |
| u16 type_detail; | |
| u16 speed; | |
| u8 manufacturer; | |
| u8 serial_number; | |
| u8 asset_tag; | |
| u8 part_number; | |
| u8 attributes; | |
| u32 extended_size; | |
| u16 conf_mem_clk_speed; | |
| } __attribute__((__packed__)); | |
| struct ghes_edac_dimm_fill { | |
| struct mem_ctl_info *mci; | |
| unsigned count; | |
| }; | |
| static void ghes_edac_count_dimms(const struct dmi_header *dh, void *arg) | |
| { | |
| int *num_dimm = arg; | |
| if (dh->type == DMI_ENTRY_MEM_DEVICE) | |
| (*num_dimm)++; | |
| } | |
| static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg) | |
| { | |
| struct ghes_edac_dimm_fill *dimm_fill = arg; | |
| struct mem_ctl_info *mci = dimm_fill->mci; | |
| if (dh->type == DMI_ENTRY_MEM_DEVICE) { | |
| struct memdev_dmi_entry *entry = (struct memdev_dmi_entry *)dh; | |
| struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, | |
| mci->n_layers, | |
| dimm_fill->count, 0, 0); | |
| if (entry->size == 0xffff) { | |
| pr_info("Can't get DIMM%i size\n", | |
| dimm_fill->count); | |
| dimm->nr_pages = MiB_TO_PAGES(32);/* Unknown */ | |
| } else if (entry->size == 0x7fff) { | |
| dimm->nr_pages = MiB_TO_PAGES(entry->extended_size); | |
| } else { | |
| if (entry->size & 1 << 15) | |
| dimm->nr_pages = MiB_TO_PAGES((entry->size & | |
| 0x7fff) << 10); | |
| else | |
| dimm->nr_pages = MiB_TO_PAGES(entry->size); | |
| } | |
| switch (entry->memory_type) { | |
| case 0x12: | |
| if (entry->type_detail & 1 << 13) | |
| dimm->mtype = MEM_RDDR; | |
| else | |
| dimm->mtype = MEM_DDR; | |
| break; | |
| case 0x13: | |
| if (entry->type_detail & 1 << 13) | |
| dimm->mtype = MEM_RDDR2; | |
| else | |
| dimm->mtype = MEM_DDR2; | |
| break; | |
| case 0x14: | |
| dimm->mtype = MEM_FB_DDR2; | |
| break; | |
| case 0x18: | |
| if (entry->type_detail & 1 << 13) | |
| dimm->mtype = MEM_RDDR3; | |
| else | |
| dimm->mtype = MEM_DDR3; | |
| break; | |
| default: | |
| if (entry->type_detail & 1 << 6) | |
| dimm->mtype = MEM_RMBS; | |
| else if ((entry->type_detail & ((1 << 7) | (1 << 13))) | |
| == ((1 << 7) | (1 << 13))) | |
| dimm->mtype = MEM_RDR; | |
| else if (entry->type_detail & 1 << 7) | |
| dimm->mtype = MEM_SDR; | |
| else if (entry->type_detail & 1 << 9) | |
| dimm->mtype = MEM_EDO; | |
| else | |
| dimm->mtype = MEM_UNKNOWN; | |
| } | |
| /* | |
| * Actually, we can only detect if the memory has bits for | |
| * checksum or not | |
| */ | |
| if (entry->total_width == entry->data_width) | |
| dimm->edac_mode = EDAC_NONE; | |
| else | |
| dimm->edac_mode = EDAC_SECDED; | |
| dimm->dtype = DEV_UNKNOWN; | |
| dimm->grain = 128; /* Likely, worse case */ | |
| /* | |
| * FIXME: It shouldn't be hard to also fill the DIMM labels | |
| */ | |
| if (dimm->nr_pages) { | |
| edac_dbg(1, "DIMM%i: %s size = %d MB%s\n", | |
| dimm_fill->count, edac_mem_types[dimm->mtype], | |
| PAGES_TO_MiB(dimm->nr_pages), | |
| (dimm->edac_mode != EDAC_NONE) ? "(ECC)" : ""); | |
| edac_dbg(2, "\ttype %d, detail 0x%02x, width %d(total %d)\n", | |
| entry->memory_type, entry->type_detail, | |
| entry->total_width, entry->data_width); | |
| } | |
| dimm_fill->count++; | |
| } | |
| } | |
| void ghes_edac_report_mem_error(struct ghes *ghes, int sev, | |
| struct cper_sec_mem_err *mem_err) | |
| { | |
| enum hw_event_mc_err_type type; | |
| struct edac_raw_error_desc *e; | |
| struct mem_ctl_info *mci; | |
| struct ghes_edac_pvt *pvt = NULL; | |
| char *p; | |
| u8 grain_bits; | |
| list_for_each_entry(pvt, &ghes_reglist, list) { | |
| if (ghes == pvt->ghes) | |
| break; | |
| } | |
| if (!pvt) { | |
| pr_err("Internal error: Can't find EDAC structure\n"); | |
| return; | |
| } | |
| mci = pvt->mci; | |
| e = &mci->error_desc; | |
| /* Cleans the error report buffer */ | |
| memset(e, 0, sizeof (*e)); | |
| e->error_count = 1; | |
| strcpy(e->label, "unknown label"); | |
| e->msg = pvt->msg; | |
| e->other_detail = pvt->other_detail; | |
| e->top_layer = -1; | |
| e->mid_layer = -1; | |
| e->low_layer = -1; | |
| *pvt->other_detail = '\0'; | |
| *pvt->msg = '\0'; | |
| switch (sev) { | |
| case GHES_SEV_CORRECTED: | |
| type = HW_EVENT_ERR_CORRECTED; | |
| break; | |
| case GHES_SEV_RECOVERABLE: | |
| type = HW_EVENT_ERR_UNCORRECTED; | |
| break; | |
| case GHES_SEV_PANIC: | |
| type = HW_EVENT_ERR_FATAL; | |
| break; | |
| default: | |
| case GHES_SEV_NO: | |
| type = HW_EVENT_ERR_INFO; | |
| } | |
| edac_dbg(1, "error validation_bits: 0x%08llx\n", | |
| (long long)mem_err->validation_bits); | |
| /* Error type, mapped on e->msg */ | |
| if (mem_err->validation_bits & CPER_MEM_VALID_ERROR_TYPE) { | |
| p = pvt->msg; | |
| switch (mem_err->error_type) { | |
| case 0: | |
| p += sprintf(p, "Unknown"); | |
| break; | |
| case 1: | |
| p += sprintf(p, "No error"); | |
| break; | |
| case 2: | |
| p += sprintf(p, "Single-bit ECC"); | |
| break; | |
| case 3: | |
| p += sprintf(p, "Multi-bit ECC"); | |
| break; | |
| case 4: | |
| p += sprintf(p, "Single-symbol ChipKill ECC"); | |
| break; | |
| case 5: | |
| p += sprintf(p, "Multi-symbol ChipKill ECC"); | |
| break; | |
| case 6: | |
| p += sprintf(p, "Master abort"); | |
| break; | |
| case 7: | |
| p += sprintf(p, "Target abort"); | |
| break; | |
| case 8: | |
| p += sprintf(p, "Parity Error"); | |
| break; | |
| case 9: | |
| p += sprintf(p, "Watchdog timeout"); | |
| break; | |
| case 10: | |
| p += sprintf(p, "Invalid address"); | |
| break; | |
| case 11: | |
| p += sprintf(p, "Mirror Broken"); | |
| break; | |
| case 12: | |
| p += sprintf(p, "Memory Sparing"); | |
| break; | |
| case 13: | |
| p += sprintf(p, "Scrub corrected error"); | |
| break; | |
| case 14: | |
| p += sprintf(p, "Scrub uncorrected error"); | |
| break; | |
| case 15: | |
| p += sprintf(p, "Physical Memory Map-out event"); | |
| break; | |
| default: | |
| p += sprintf(p, "reserved error (%d)", | |
| mem_err->error_type); | |
| } | |
| } else { | |
| strcpy(pvt->msg, "unknown error"); | |
| } | |
| /* Error address */ | |
| if (mem_err->validation_bits & CPER_MEM_VALID_PA) { | |
| e->page_frame_number = mem_err->physical_addr >> PAGE_SHIFT; | |
| e->offset_in_page = mem_err->physical_addr & ~PAGE_MASK; | |
| } | |
| /* Error grain */ | |
| if (mem_err->validation_bits & CPER_MEM_VALID_PA_MASK) | |
| e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK); | |
| /* Memory error location, mapped on e->location */ | |
| p = e->location; | |
| if (mem_err->validation_bits & CPER_MEM_VALID_NODE) | |
| p += sprintf(p, "node:%d ", mem_err->node); | |
| if (mem_err->validation_bits & CPER_MEM_VALID_CARD) | |
| p += sprintf(p, "card:%d ", mem_err->card); | |
| if (mem_err->validation_bits & CPER_MEM_VALID_MODULE) | |
| p += sprintf(p, "module:%d ", mem_err->module); | |
| if (mem_err->validation_bits & CPER_MEM_VALID_RANK_NUMBER) | |
| p += sprintf(p, "rank:%d ", mem_err->rank); | |
| if (mem_err->validation_bits & CPER_MEM_VALID_BANK) | |
| p += sprintf(p, "bank:%d ", mem_err->bank); | |
| if (mem_err->validation_bits & CPER_MEM_VALID_ROW) | |
| p += sprintf(p, "row:%d ", mem_err->row); | |
| if (mem_err->validation_bits & CPER_MEM_VALID_COLUMN) | |
| p += sprintf(p, "col:%d ", mem_err->column); | |
| if (mem_err->validation_bits & CPER_MEM_VALID_BIT_POSITION) | |
| p += sprintf(p, "bit_pos:%d ", mem_err->bit_pos); | |
| if (mem_err->validation_bits & CPER_MEM_VALID_MODULE_HANDLE) { | |
| const char *bank = NULL, *device = NULL; | |
| dmi_memdev_name(mem_err->mem_dev_handle, &bank, &device); | |
| if (bank != NULL && device != NULL) | |
| p += sprintf(p, "DIMM location:%s %s ", bank, device); | |
| else | |
| p += sprintf(p, "DIMM DMI handle: 0x%.4x ", | |
| mem_err->mem_dev_handle); | |
| } | |
| if (p > e->location) | |
| *(p - 1) = '\0'; | |
| /* All other fields are mapped on e->other_detail */ | |
| p = pvt->other_detail; | |
| if (mem_err->validation_bits & CPER_MEM_VALID_ERROR_STATUS) { | |
| u64 status = mem_err->error_status; | |
| p += sprintf(p, "status(0x%016llx): ", (long long)status); | |
| switch ((status >> 8) & 0xff) { | |
| case 1: | |
| p += sprintf(p, "Error detected internal to the component "); | |
| break; | |
| case 16: | |
| p += sprintf(p, "Error detected in the bus "); | |
| break; | |
| case 4: | |
| p += sprintf(p, "Storage error in DRAM memory "); | |
| break; | |
| case 5: | |
| p += sprintf(p, "Storage error in TLB "); | |
| break; | |
| case 6: | |
| p += sprintf(p, "Storage error in cache "); | |
| break; | |
| case 7: | |
| p += sprintf(p, "Error in one or more functional units "); | |
| break; | |
| case 8: | |
| p += sprintf(p, "component failed self test "); | |
| break; | |
| case 9: | |
| p += sprintf(p, "Overflow or undervalue of internal queue "); | |
| break; | |
| case 17: | |
| p += sprintf(p, "Virtual address not found on IO-TLB or IO-PDIR "); | |
| break; | |
| case 18: | |
| p += sprintf(p, "Improper access error "); | |
| break; | |
| case 19: | |
| p += sprintf(p, "Access to a memory address which is not mapped to any component "); | |
| break; | |
| case 20: | |
| p += sprintf(p, "Loss of Lockstep "); | |
| break; | |
| case 21: | |
| p += sprintf(p, "Response not associated with a request "); | |
| break; | |
| case 22: | |
| p += sprintf(p, "Bus parity error - must also set the A, C, or D Bits "); | |
| break; | |
| case 23: | |
| p += sprintf(p, "Detection of a PATH_ERROR "); | |
| break; | |
| case 25: | |
| p += sprintf(p, "Bus operation timeout "); | |
| break; | |
| case 26: | |
| p += sprintf(p, "A read was issued to data that has been poisoned "); | |
| break; | |
| default: | |
| p += sprintf(p, "reserved "); | |
| break; | |
| } | |
| } | |
| if (mem_err->validation_bits & CPER_MEM_VALID_REQUESTOR_ID) | |
| p += sprintf(p, "requestorID: 0x%016llx ", | |
| (long long)mem_err->requestor_id); | |
| if (mem_err->validation_bits & CPER_MEM_VALID_RESPONDER_ID) | |
| p += sprintf(p, "responderID: 0x%016llx ", | |
| (long long)mem_err->responder_id); | |
| if (mem_err->validation_bits & CPER_MEM_VALID_TARGET_ID) | |
| p += sprintf(p, "targetID: 0x%016llx ", | |
| (long long)mem_err->responder_id); | |
| if (p > pvt->other_detail) | |
| *(p - 1) = '\0'; | |
| /* Generate the trace event */ | |
| grain_bits = fls_long(e->grain); | |
| snprintf(pvt->detail_location, sizeof(pvt->detail_location), | |
| "APEI location: %s %s", e->location, e->other_detail); | |
| trace_mc_event(type, e->msg, e->label, e->error_count, | |
| mci->mc_idx, e->top_layer, e->mid_layer, e->low_layer, | |
| (e->page_frame_number << PAGE_SHIFT) | e->offset_in_page, | |
| grain_bits, e->syndrome, pvt->detail_location); | |
| /* Report the error via EDAC API */ | |
| edac_raw_mc_handle_error(type, mci, e); | |
| } | |
| EXPORT_SYMBOL_GPL(ghes_edac_report_mem_error); | |
| int ghes_edac_register(struct ghes *ghes, struct device *dev) | |
| { | |
| bool fake = false; | |
| int rc, num_dimm = 0; | |
| struct mem_ctl_info *mci; | |
| struct edac_mc_layer layers[1]; | |
| struct ghes_edac_pvt *pvt; | |
| struct ghes_edac_dimm_fill dimm_fill; | |
| /* Get the number of DIMMs */ | |
| dmi_walk(ghes_edac_count_dimms, &num_dimm); | |
| /* Check if we've got a bogus BIOS */ | |
| if (num_dimm == 0) { | |
| fake = true; | |
| num_dimm = 1; | |
| } | |
| layers[0].type = EDAC_MC_LAYER_ALL_MEM; | |
| layers[0].size = num_dimm; | |
| layers[0].is_virt_csrow = true; | |
| /* | |
| * We need to serialize edac_mc_alloc() and edac_mc_add_mc(), | |
| * to avoid duplicated memory controller numbers | |
| */ | |
| mutex_lock(&ghes_edac_lock); | |
| mci = edac_mc_alloc(ghes_edac_mc_num, ARRAY_SIZE(layers), layers, | |
| sizeof(*pvt)); | |
| if (!mci) { | |
| pr_info("Can't allocate memory for EDAC data\n"); | |
| mutex_unlock(&ghes_edac_lock); | |
| return -ENOMEM; | |
| } | |
| pvt = mci->pvt_info; | |
| memset(pvt, 0, sizeof(*pvt)); | |
| list_add_tail(&pvt->list, &ghes_reglist); | |
| pvt->ghes = ghes; | |
| pvt->mci = mci; | |
| mci->pdev = dev; | |
| mci->mtype_cap = MEM_FLAG_EMPTY; | |
| mci->edac_ctl_cap = EDAC_FLAG_NONE; | |
| mci->edac_cap = EDAC_FLAG_NONE; | |
| mci->mod_name = "ghes_edac.c"; | |
| mci->ctl_name = "ghes_edac"; | |
| mci->dev_name = "ghes"; | |
| if (!ghes_edac_mc_num) { | |
| if (!fake) { | |
| pr_info("This EDAC driver relies on BIOS to enumerate memory and get error reports.\n"); | |
| pr_info("Unfortunately, not all BIOSes reflect the memory layout correctly.\n"); | |
| pr_info("So, the end result of using this driver varies from vendor to vendor.\n"); | |
| pr_info("If you find incorrect reports, please contact your hardware vendor\n"); | |
| pr_info("to correct its BIOS.\n"); | |
| pr_info("This system has %d DIMM sockets.\n", | |
| num_dimm); | |
| } else { | |
| pr_info("This system has a very crappy BIOS: It doesn't even list the DIMMS.\n"); | |
| pr_info("Its SMBIOS info is wrong. It is doubtful that the error report would\n"); | |
| pr_info("work on such system. Use this driver with caution\n"); | |
| } | |
| } | |
| if (!fake) { | |
| /* | |
| * Fill DIMM info from DMI for the memory controller #0 | |
| * | |
| * Keep it in blank for the other memory controllers, as | |
| * there's no reliable way to properly credit each DIMM to | |
| * the memory controller, as different BIOSes fill the | |
| * DMI bank location fields on different ways | |
| */ | |
| if (!ghes_edac_mc_num) { | |
| dimm_fill.count = 0; | |
| dimm_fill.mci = mci; | |
| dmi_walk(ghes_edac_dmidecode, &dimm_fill); | |
| } | |
| } else { | |
| struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, | |
| mci->n_layers, 0, 0, 0); | |
| dimm->nr_pages = 1; | |
| dimm->grain = 128; | |
| dimm->mtype = MEM_UNKNOWN; | |
| dimm->dtype = DEV_UNKNOWN; | |
| dimm->edac_mode = EDAC_SECDED; | |
| } | |
| rc = edac_mc_add_mc(mci); | |
| if (rc < 0) { | |
| pr_info("Can't register at EDAC core\n"); | |
| edac_mc_free(mci); | |
| mutex_unlock(&ghes_edac_lock); | |
| return -ENODEV; | |
| } | |
| ghes_edac_mc_num++; | |
| mutex_unlock(&ghes_edac_lock); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ghes_edac_register); | |
| void ghes_edac_unregister(struct ghes *ghes) | |
| { | |
| struct mem_ctl_info *mci; | |
| struct ghes_edac_pvt *pvt, *tmp; | |
| list_for_each_entry_safe(pvt, tmp, &ghes_reglist, list) { | |
| if (ghes == pvt->ghes) { | |
| mci = pvt->mci; | |
| edac_mc_del_mc(mci->pdev); | |
| edac_mc_free(mci); | |
| list_del(&pvt->list); | |
| } | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(ghes_edac_unregister); |