| /* | |
| * Copyright (C) 2007 PA Semi, Inc | |
| * | |
| * Authors: Egor Martovetsky <egor@pasemi.com> | |
| * Olof Johansson <olof@lixom.net> | |
| * | |
| * Maintained by: Olof Johansson <olof@lixom.net> | |
| * | |
| * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c: | |
| * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * | |
| */ | |
| #include <linux/cpufreq.h> | |
| #include <linux/timer.h> | |
| #include <linux/module.h> | |
| #include <linux/of_address.h> | |
| #include <asm/hw_irq.h> | |
| #include <asm/io.h> | |
| #include <asm/prom.h> | |
| #include <asm/time.h> | |
| #include <asm/smp.h> | |
| #define SDCASR_REG 0x0100 | |
| #define SDCASR_REG_STRIDE 0x1000 | |
| #define SDCPWR_CFGA0_REG 0x0100 | |
| #define SDCPWR_PWST0_REG 0x0000 | |
| #define SDCPWR_GIZTIME_REG 0x0440 | |
| /* SDCPWR_GIZTIME_REG fields */ | |
| #define SDCPWR_GIZTIME_GR 0x80000000 | |
| #define SDCPWR_GIZTIME_LONGLOCK 0x000000ff | |
| /* Offset of ASR registers from SDC base */ | |
| #define SDCASR_OFFSET 0x120000 | |
| static void __iomem *sdcpwr_mapbase; | |
| static void __iomem *sdcasr_mapbase; | |
| /* Current astate, is used when waking up from power savings on | |
| * one core, in case the other core has switched states during | |
| * the idle time. | |
| */ | |
| static int current_astate; | |
| /* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */ | |
| static struct cpufreq_frequency_table pas_freqs[] = { | |
| {0, 0, 0}, | |
| {0, 1, 0}, | |
| {0, 2, 0}, | |
| {0, 3, 0}, | |
| {0, 4, 0}, | |
| {0, 0, CPUFREQ_TABLE_END}, | |
| }; | |
| /* | |
| * hardware specific functions | |
| */ | |
| static int get_astate_freq(int astate) | |
| { | |
| u32 ret; | |
| ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10)); | |
| return ret & 0x3f; | |
| } | |
| static int get_cur_astate(int cpu) | |
| { | |
| u32 ret; | |
| ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG); | |
| ret = (ret >> (cpu * 4)) & 0x7; | |
| return ret; | |
| } | |
| static int get_gizmo_latency(void) | |
| { | |
| u32 giztime, ret; | |
| giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG); | |
| /* just provide the upper bound */ | |
| if (giztime & SDCPWR_GIZTIME_GR) | |
| ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000; | |
| else | |
| ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000; | |
| return ret; | |
| } | |
| static void set_astate(int cpu, unsigned int astate) | |
| { | |
| unsigned long flags; | |
| /* Return if called before init has run */ | |
| if (unlikely(!sdcasr_mapbase)) | |
| return; | |
| local_irq_save(flags); | |
| out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate); | |
| local_irq_restore(flags); | |
| } | |
| int check_astate(void) | |
| { | |
| return get_cur_astate(hard_smp_processor_id()); | |
| } | |
| void restore_astate(int cpu) | |
| { | |
| set_astate(cpu, current_astate); | |
| } | |
| /* | |
| * cpufreq functions | |
| */ | |
| static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) | |
| { | |
| struct cpufreq_frequency_table *pos; | |
| const u32 *max_freqp; | |
| u32 max_freq; | |
| int cur_astate; | |
| struct resource res; | |
| struct device_node *cpu, *dn; | |
| int err = -ENODEV; | |
| cpu = of_get_cpu_node(policy->cpu, NULL); | |
| if (!cpu) | |
| goto out; | |
| dn = of_find_compatible_node(NULL, NULL, "1682m-sdc"); | |
| if (!dn) | |
| dn = of_find_compatible_node(NULL, NULL, | |
| "pasemi,pwrficient-sdc"); | |
| if (!dn) | |
| goto out; | |
| err = of_address_to_resource(dn, 0, &res); | |
| of_node_put(dn); | |
| if (err) | |
| goto out; | |
| sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000); | |
| if (!sdcasr_mapbase) { | |
| err = -EINVAL; | |
| goto out; | |
| } | |
| dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo"); | |
| if (!dn) | |
| dn = of_find_compatible_node(NULL, NULL, | |
| "pasemi,pwrficient-gizmo"); | |
| if (!dn) { | |
| err = -ENODEV; | |
| goto out_unmap_sdcasr; | |
| } | |
| err = of_address_to_resource(dn, 0, &res); | |
| of_node_put(dn); | |
| if (err) | |
| goto out_unmap_sdcasr; | |
| sdcpwr_mapbase = ioremap(res.start, 0x1000); | |
| if (!sdcpwr_mapbase) { | |
| err = -EINVAL; | |
| goto out_unmap_sdcasr; | |
| } | |
| pr_debug("init cpufreq on CPU %d\n", policy->cpu); | |
| max_freqp = of_get_property(cpu, "clock-frequency", NULL); | |
| if (!max_freqp) { | |
| err = -EINVAL; | |
| goto out_unmap_sdcpwr; | |
| } | |
| /* we need the freq in kHz */ | |
| max_freq = *max_freqp / 1000; | |
| pr_debug("max clock-frequency is at %u kHz\n", max_freq); | |
| pr_debug("initializing frequency table\n"); | |
| /* initialize frequency table */ | |
| cpufreq_for_each_entry(pos, pas_freqs) { | |
| pos->frequency = get_astate_freq(pos->driver_data) * 100000; | |
| pr_debug("%d: %d\n", (int)(pos - pas_freqs), pos->frequency); | |
| } | |
| cur_astate = get_cur_astate(policy->cpu); | |
| pr_debug("current astate is at %d\n",cur_astate); | |
| policy->cur = pas_freqs[cur_astate].frequency; | |
| ppc_proc_freq = policy->cur * 1000ul; | |
| return cpufreq_generic_init(policy, pas_freqs, get_gizmo_latency()); | |
| out_unmap_sdcpwr: | |
| iounmap(sdcpwr_mapbase); | |
| out_unmap_sdcasr: | |
| iounmap(sdcasr_mapbase); | |
| out: | |
| return err; | |
| } | |
| static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) | |
| { | |
| /* | |
| * We don't support CPU hotplug. Don't unmap after the system | |
| * has already made it to a running state. | |
| */ | |
| if (system_state >= SYSTEM_RUNNING) | |
| return 0; | |
| if (sdcasr_mapbase) | |
| iounmap(sdcasr_mapbase); | |
| if (sdcpwr_mapbase) | |
| iounmap(sdcpwr_mapbase); | |
| return 0; | |
| } | |
| static int pas_cpufreq_target(struct cpufreq_policy *policy, | |
| unsigned int pas_astate_new) | |
| { | |
| int i; | |
| pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", | |
| policy->cpu, | |
| pas_freqs[pas_astate_new].frequency, | |
| pas_freqs[pas_astate_new].driver_data); | |
| current_astate = pas_astate_new; | |
| for_each_online_cpu(i) | |
| set_astate(i, pas_astate_new); | |
| ppc_proc_freq = pas_freqs[pas_astate_new].frequency * 1000ul; | |
| return 0; | |
| } | |
| static struct cpufreq_driver pas_cpufreq_driver = { | |
| .name = "pas-cpufreq", | |
| .flags = CPUFREQ_CONST_LOOPS, | |
| .init = pas_cpufreq_cpu_init, | |
| .exit = pas_cpufreq_cpu_exit, | |
| .verify = cpufreq_generic_frequency_table_verify, | |
| .target_index = pas_cpufreq_target, | |
| .attr = cpufreq_generic_attr, | |
| }; | |
| /* | |
| * module init and destoy | |
| */ | |
| static int __init pas_cpufreq_init(void) | |
| { | |
| if (!of_machine_is_compatible("PA6T-1682M") && | |
| !of_machine_is_compatible("pasemi,pwrficient")) | |
| return -ENODEV; | |
| return cpufreq_register_driver(&pas_cpufreq_driver); | |
| } | |
| static void __exit pas_cpufreq_exit(void) | |
| { | |
| cpufreq_unregister_driver(&pas_cpufreq_driver); | |
| } | |
| module_init(pas_cpufreq_init); | |
| module_exit(pas_cpufreq_exit); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>"); |