| /* | |
| * Copyright (C) 2000-2001 Deep Blue Solutions | |
| * Copyright (C) 2002 Shane Nay (shane@minirl.com) | |
| * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) | |
| * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) | |
| * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version 2 | |
| * of the License, or (at your option) any later version. | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, | |
| * MA 02110-1301, USA. | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/clk.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/stmp_device.h> | |
| #include <linux/sched_clock.h> | |
| /* | |
| * There are 2 versions of the timrot on Freescale MXS-based SoCs. | |
| * The v1 on MX23 only gets 16 bits counter, while v2 on MX28 | |
| * extends the counter to 32 bits. | |
| * | |
| * The implementation uses two timers, one for clock_event and | |
| * another for clocksource. MX28 uses timrot 0 and 1, while MX23 | |
| * uses 0 and 2. | |
| */ | |
| #define MX23_TIMROT_VERSION_OFFSET 0x0a0 | |
| #define MX28_TIMROT_VERSION_OFFSET 0x120 | |
| #define BP_TIMROT_MAJOR_VERSION 24 | |
| #define BV_TIMROT_VERSION_1 0x01 | |
| #define BV_TIMROT_VERSION_2 0x02 | |
| #define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1) | |
| /* | |
| * There are 4 registers for each timrotv2 instance, and 2 registers | |
| * for each timrotv1. So address step 0x40 in macros below strides | |
| * one instance of timrotv2 while two instances of timrotv1. | |
| * | |
| * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1 | |
| * on MX28 while timrot2 on MX23. | |
| */ | |
| /* common between v1 and v2 */ | |
| #define HW_TIMROT_ROTCTRL 0x00 | |
| #define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40) | |
| /* v1 only */ | |
| #define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40) | |
| /* v2 only */ | |
| #define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40) | |
| #define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40) | |
| #define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6) | |
| #define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7) | |
| #define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14) | |
| #define BM_TIMROT_TIMCTRLn_IRQ (1 << 15) | |
| #define BP_TIMROT_TIMCTRLn_SELECT 0 | |
| #define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8 | |
| #define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb | |
| #define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf | |
| static struct clock_event_device mxs_clockevent_device; | |
| static void __iomem *mxs_timrot_base; | |
| static u32 timrot_major_version; | |
| static inline void timrot_irq_disable(void) | |
| { | |
| __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base + | |
| HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR); | |
| } | |
| static inline void timrot_irq_enable(void) | |
| { | |
| __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base + | |
| HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET); | |
| } | |
| static void timrot_irq_acknowledge(void) | |
| { | |
| __raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base + | |
| HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR); | |
| } | |
| static u64 timrotv1_get_cycles(struct clocksource *cs) | |
| { | |
| return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)) | |
| & 0xffff0000) >> 16); | |
| } | |
| static int timrotv1_set_next_event(unsigned long evt, | |
| struct clock_event_device *dev) | |
| { | |
| /* timrot decrements the count */ | |
| __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0)); | |
| return 0; | |
| } | |
| static int timrotv2_set_next_event(unsigned long evt, | |
| struct clock_event_device *dev) | |
| { | |
| /* timrot decrements the count */ | |
| __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0)); | |
| return 0; | |
| } | |
| static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id) | |
| { | |
| struct clock_event_device *evt = dev_id; | |
| timrot_irq_acknowledge(); | |
| evt->event_handler(evt); | |
| return IRQ_HANDLED; | |
| } | |
| static struct irqaction mxs_timer_irq = { | |
| .name = "MXS Timer Tick", | |
| .dev_id = &mxs_clockevent_device, | |
| .flags = IRQF_TIMER | IRQF_IRQPOLL, | |
| .handler = mxs_timer_interrupt, | |
| }; | |
| static void mxs_irq_clear(char *state) | |
| { | |
| /* Disable interrupt in timer module */ | |
| timrot_irq_disable(); | |
| /* Set event time into the furthest future */ | |
| if (timrot_is_v1()) | |
| __raw_writel(0xffff, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); | |
| else | |
| __raw_writel(0xffffffff, | |
| mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); | |
| /* Clear pending interrupt */ | |
| timrot_irq_acknowledge(); | |
| #ifdef DEBUG | |
| pr_info("%s: changing mode to %s\n", __func__, state) | |
| #endif /* DEBUG */ | |
| } | |
| static int mxs_shutdown(struct clock_event_device *evt) | |
| { | |
| mxs_irq_clear("shutdown"); | |
| return 0; | |
| } | |
| static int mxs_set_oneshot(struct clock_event_device *evt) | |
| { | |
| if (clockevent_state_oneshot(evt)) | |
| mxs_irq_clear("oneshot"); | |
| timrot_irq_enable(); | |
| return 0; | |
| } | |
| static struct clock_event_device mxs_clockevent_device = { | |
| .name = "mxs_timrot", | |
| .features = CLOCK_EVT_FEAT_ONESHOT, | |
| .set_state_shutdown = mxs_shutdown, | |
| .set_state_oneshot = mxs_set_oneshot, | |
| .tick_resume = mxs_shutdown, | |
| .set_next_event = timrotv2_set_next_event, | |
| .rating = 200, | |
| }; | |
| static int __init mxs_clockevent_init(struct clk *timer_clk) | |
| { | |
| if (timrot_is_v1()) | |
| mxs_clockevent_device.set_next_event = timrotv1_set_next_event; | |
| mxs_clockevent_device.cpumask = cpumask_of(0); | |
| clockevents_config_and_register(&mxs_clockevent_device, | |
| clk_get_rate(timer_clk), | |
| timrot_is_v1() ? 0xf : 0x2, | |
| timrot_is_v1() ? 0xfffe : 0xfffffffe); | |
| return 0; | |
| } | |
| static struct clocksource clocksource_mxs = { | |
| .name = "mxs_timer", | |
| .rating = 200, | |
| .read = timrotv1_get_cycles, | |
| .mask = CLOCKSOURCE_MASK(16), | |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, | |
| }; | |
| static u64 notrace mxs_read_sched_clock_v2(void) | |
| { | |
| return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1)); | |
| } | |
| static int __init mxs_clocksource_init(struct clk *timer_clk) | |
| { | |
| unsigned int c = clk_get_rate(timer_clk); | |
| if (timrot_is_v1()) | |
| clocksource_register_hz(&clocksource_mxs, c); | |
| else { | |
| clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1), | |
| "mxs_timer", c, 200, 32, clocksource_mmio_readl_down); | |
| sched_clock_register(mxs_read_sched_clock_v2, 32, c); | |
| } | |
| return 0; | |
| } | |
| static int __init mxs_timer_init(struct device_node *np) | |
| { | |
| struct clk *timer_clk; | |
| int irq, ret; | |
| mxs_timrot_base = of_iomap(np, 0); | |
| WARN_ON(!mxs_timrot_base); | |
| timer_clk = of_clk_get(np, 0); | |
| if (IS_ERR(timer_clk)) { | |
| pr_err("%s: failed to get clk\n", __func__); | |
| return PTR_ERR(timer_clk); | |
| } | |
| ret = clk_prepare_enable(timer_clk); | |
| if (ret) | |
| return ret; | |
| /* | |
| * Initialize timers to a known state | |
| */ | |
| stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL); | |
| /* get timrot version */ | |
| timrot_major_version = __raw_readl(mxs_timrot_base + | |
| (of_device_is_compatible(np, "fsl,imx23-timrot") ? | |
| MX23_TIMROT_VERSION_OFFSET : | |
| MX28_TIMROT_VERSION_OFFSET)); | |
| timrot_major_version >>= BP_TIMROT_MAJOR_VERSION; | |
| /* one for clock_event */ | |
| __raw_writel((timrot_is_v1() ? | |
| BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : | |
| BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | | |
| BM_TIMROT_TIMCTRLn_UPDATE | | |
| BM_TIMROT_TIMCTRLn_IRQ_EN, | |
| mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); | |
| /* another for clocksource */ | |
| __raw_writel((timrot_is_v1() ? | |
| BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : | |
| BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | | |
| BM_TIMROT_TIMCTRLn_RELOAD, | |
| mxs_timrot_base + HW_TIMROT_TIMCTRLn(1)); | |
| /* set clocksource timer fixed count to the maximum */ | |
| if (timrot_is_v1()) | |
| __raw_writel(0xffff, | |
| mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); | |
| else | |
| __raw_writel(0xffffffff, | |
| mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); | |
| /* init and register the timer to the framework */ | |
| ret = mxs_clocksource_init(timer_clk); | |
| if (ret) | |
| return ret; | |
| ret = mxs_clockevent_init(timer_clk); | |
| if (ret) | |
| return ret; | |
| /* Make irqs happen */ | |
| irq = irq_of_parse_and_map(np, 0); | |
| if (irq <= 0) | |
| return -EINVAL; | |
| return setup_irq(irq, &mxs_timer_irq); | |
| } | |
| TIMER_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init); |