| // SPDX-License-Identifier: GPL-2.0 | |
| /* time.c: UltraSparc timer and TOD clock support. | |
| * | |
| * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net) | |
| * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) | |
| * | |
| * Based largely on code which is: | |
| * | |
| * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/export.h> | |
| #include <linux/sched.h> | |
| #include <linux/kernel.h> | |
| #include <linux/param.h> | |
| #include <linux/string.h> | |
| #include <linux/mm.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/time.h> | |
| #include <linux/timex.h> | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| #include <linux/mc146818rtc.h> | |
| #include <linux/delay.h> | |
| #include <linux/profile.h> | |
| #include <linux/bcd.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/percpu.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/rtc/m48t59.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/clocksource.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/ftrace.h> | |
| #include <asm/oplib.h> | |
| #include <asm/timer.h> | |
| #include <asm/irq.h> | |
| #include <asm/io.h> | |
| #include <asm/prom.h> | |
| #include <asm/starfire.h> | |
| #include <asm/smp.h> | |
| #include <asm/sections.h> | |
| #include <asm/cpudata.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/irq_regs.h> | |
| #include <asm/cacheflush.h> | |
| #include "entry.h" | |
| #include "kernel.h" | |
| DEFINE_SPINLOCK(rtc_lock); | |
| #ifdef CONFIG_SMP | |
| unsigned long profile_pc(struct pt_regs *regs) | |
| { | |
| unsigned long pc = instruction_pointer(regs); | |
| if (in_lock_functions(pc)) | |
| return regs->u_regs[UREG_RETPC]; | |
| return pc; | |
| } | |
| EXPORT_SYMBOL(profile_pc); | |
| #endif | |
| static void tick_disable_protection(void) | |
| { | |
| /* Set things up so user can access tick register for profiling | |
| * purposes. Also workaround BB_ERRATA_1 by doing a dummy | |
| * read back of %tick after writing it. | |
| */ | |
| __asm__ __volatile__( | |
| " ba,pt %%xcc, 1f\n" | |
| " nop\n" | |
| " .align 64\n" | |
| "1: rd %%tick, %%g2\n" | |
| " add %%g2, 6, %%g2\n" | |
| " andn %%g2, %0, %%g2\n" | |
| " wrpr %%g2, 0, %%tick\n" | |
| " rdpr %%tick, %%g0" | |
| : /* no outputs */ | |
| : "r" (TICK_PRIV_BIT) | |
| : "g2"); | |
| } | |
| static void tick_disable_irq(void) | |
| { | |
| __asm__ __volatile__( | |
| " ba,pt %%xcc, 1f\n" | |
| " nop\n" | |
| " .align 64\n" | |
| "1: wr %0, 0x0, %%tick_cmpr\n" | |
| " rd %%tick_cmpr, %%g0" | |
| : /* no outputs */ | |
| : "r" (TICKCMP_IRQ_BIT)); | |
| } | |
| static void tick_init_tick(void) | |
| { | |
| tick_disable_protection(); | |
| tick_disable_irq(); | |
| } | |
| static unsigned long long tick_get_tick(void) | |
| { | |
| unsigned long ret; | |
| __asm__ __volatile__("rd %%tick, %0\n\t" | |
| "mov %0, %0" | |
| : "=r" (ret)); | |
| return ret & ~TICK_PRIV_BIT; | |
| } | |
| static int tick_add_compare(unsigned long adj) | |
| { | |
| unsigned long orig_tick, new_tick, new_compare; | |
| __asm__ __volatile__("rd %%tick, %0" | |
| : "=r" (orig_tick)); | |
| orig_tick &= ~TICKCMP_IRQ_BIT; | |
| /* Workaround for Spitfire Errata (#54 I think??), I discovered | |
| * this via Sun BugID 4008234, mentioned in Solaris-2.5.1 patch | |
| * number 103640. | |
| * | |
| * On Blackbird writes to %tick_cmpr can fail, the | |
| * workaround seems to be to execute the wr instruction | |
| * at the start of an I-cache line, and perform a dummy | |
| * read back from %tick_cmpr right after writing to it. -DaveM | |
| */ | |
| __asm__ __volatile__("ba,pt %%xcc, 1f\n\t" | |
| " add %1, %2, %0\n\t" | |
| ".align 64\n" | |
| "1:\n\t" | |
| "wr %0, 0, %%tick_cmpr\n\t" | |
| "rd %%tick_cmpr, %%g0\n\t" | |
| : "=r" (new_compare) | |
| : "r" (orig_tick), "r" (adj)); | |
| __asm__ __volatile__("rd %%tick, %0" | |
| : "=r" (new_tick)); | |
| new_tick &= ~TICKCMP_IRQ_BIT; | |
| return ((long)(new_tick - (orig_tick+adj))) > 0L; | |
| } | |
| static unsigned long tick_add_tick(unsigned long adj) | |
| { | |
| unsigned long new_tick; | |
| /* Also need to handle Blackbird bug here too. */ | |
| __asm__ __volatile__("rd %%tick, %0\n\t" | |
| "add %0, %1, %0\n\t" | |
| "wrpr %0, 0, %%tick\n\t" | |
| : "=&r" (new_tick) | |
| : "r" (adj)); | |
| return new_tick; | |
| } | |
| /* Searches for cpu clock frequency with given cpuid in OpenBoot tree */ | |
| static unsigned long cpuid_to_freq(phandle node, int cpuid) | |
| { | |
| bool is_cpu_node = false; | |
| unsigned long freq = 0; | |
| char type[128]; | |
| if (!node) | |
| return freq; | |
| if (prom_getproperty(node, "device_type", type, sizeof(type)) != -1) | |
| is_cpu_node = (strcmp(type, "cpu") == 0); | |
| /* try upa-portid then cpuid to get cpuid, see prom_64.c */ | |
| if (is_cpu_node && (prom_getint(node, "upa-portid") == cpuid || | |
| prom_getint(node, "cpuid") == cpuid)) | |
| freq = prom_getintdefault(node, "clock-frequency", 0); | |
| if (!freq) | |
| freq = cpuid_to_freq(prom_getchild(node), cpuid); | |
| if (!freq) | |
| freq = cpuid_to_freq(prom_getsibling(node), cpuid); | |
| return freq; | |
| } | |
| static unsigned long tick_get_frequency(void) | |
| { | |
| return cpuid_to_freq(prom_root_node, hard_smp_processor_id()); | |
| } | |
| static struct sparc64_tick_ops tick_operations __cacheline_aligned = { | |
| .name = "tick", | |
| .init_tick = tick_init_tick, | |
| .disable_irq = tick_disable_irq, | |
| .get_tick = tick_get_tick, | |
| .add_tick = tick_add_tick, | |
| .add_compare = tick_add_compare, | |
| .get_frequency = tick_get_frequency, | |
| .softint_mask = 1UL << 0, | |
| }; | |
| struct sparc64_tick_ops *tick_ops __read_mostly = &tick_operations; | |
| EXPORT_SYMBOL(tick_ops); | |
| static void stick_disable_irq(void) | |
| { | |
| __asm__ __volatile__( | |
| "wr %0, 0x0, %%asr25" | |
| : /* no outputs */ | |
| : "r" (TICKCMP_IRQ_BIT)); | |
| } | |
| static void stick_init_tick(void) | |
| { | |
| /* Writes to the %tick and %stick register are not | |
| * allowed on sun4v. The Hypervisor controls that | |
| * bit, per-strand. | |
| */ | |
| if (tlb_type != hypervisor) { | |
| tick_disable_protection(); | |
| tick_disable_irq(); | |
| /* Let the user get at STICK too. */ | |
| __asm__ __volatile__( | |
| " rd %%asr24, %%g2\n" | |
| " andn %%g2, %0, %%g2\n" | |
| " wr %%g2, 0, %%asr24" | |
| : /* no outputs */ | |
| : "r" (TICK_PRIV_BIT) | |
| : "g1", "g2"); | |
| } | |
| stick_disable_irq(); | |
| } | |
| static unsigned long long stick_get_tick(void) | |
| { | |
| unsigned long ret; | |
| __asm__ __volatile__("rd %%asr24, %0" | |
| : "=r" (ret)); | |
| return ret & ~TICK_PRIV_BIT; | |
| } | |
| static unsigned long stick_add_tick(unsigned long adj) | |
| { | |
| unsigned long new_tick; | |
| __asm__ __volatile__("rd %%asr24, %0\n\t" | |
| "add %0, %1, %0\n\t" | |
| "wr %0, 0, %%asr24\n\t" | |
| : "=&r" (new_tick) | |
| : "r" (adj)); | |
| return new_tick; | |
| } | |
| static int stick_add_compare(unsigned long adj) | |
| { | |
| unsigned long orig_tick, new_tick; | |
| __asm__ __volatile__("rd %%asr24, %0" | |
| : "=r" (orig_tick)); | |
| orig_tick &= ~TICKCMP_IRQ_BIT; | |
| __asm__ __volatile__("wr %0, 0, %%asr25" | |
| : /* no outputs */ | |
| : "r" (orig_tick + adj)); | |
| __asm__ __volatile__("rd %%asr24, %0" | |
| : "=r" (new_tick)); | |
| new_tick &= ~TICKCMP_IRQ_BIT; | |
| return ((long)(new_tick - (orig_tick+adj))) > 0L; | |
| } | |
| static unsigned long stick_get_frequency(void) | |
| { | |
| return prom_getintdefault(prom_root_node, "stick-frequency", 0); | |
| } | |
| static struct sparc64_tick_ops stick_operations __read_mostly = { | |
| .name = "stick", | |
| .init_tick = stick_init_tick, | |
| .disable_irq = stick_disable_irq, | |
| .get_tick = stick_get_tick, | |
| .add_tick = stick_add_tick, | |
| .add_compare = stick_add_compare, | |
| .get_frequency = stick_get_frequency, | |
| .softint_mask = 1UL << 16, | |
| }; | |
| /* On Hummingbird the STICK/STICK_CMPR register is implemented | |
| * in I/O space. There are two 64-bit registers each, the | |
| * first holds the low 32-bits of the value and the second holds | |
| * the high 32-bits. | |
| * | |
| * Since STICK is constantly updating, we have to access it carefully. | |
| * | |
| * The sequence we use to read is: | |
| * 1) read high | |
| * 2) read low | |
| * 3) read high again, if it rolled re-read both low and high again. | |
| * | |
| * Writing STICK safely is also tricky: | |
| * 1) write low to zero | |
| * 2) write high | |
| * 3) write low | |
| */ | |
| static unsigned long __hbird_read_stick(void) | |
| { | |
| unsigned long ret, tmp1, tmp2, tmp3; | |
| unsigned long addr = HBIRD_STICK_ADDR+8; | |
| __asm__ __volatile__("ldxa [%1] %5, %2\n" | |
| "1:\n\t" | |
| "sub %1, 0x8, %1\n\t" | |
| "ldxa [%1] %5, %3\n\t" | |
| "add %1, 0x8, %1\n\t" | |
| "ldxa [%1] %5, %4\n\t" | |
| "cmp %4, %2\n\t" | |
| "bne,a,pn %%xcc, 1b\n\t" | |
| " mov %4, %2\n\t" | |
| "sllx %4, 32, %4\n\t" | |
| "or %3, %4, %0\n\t" | |
| : "=&r" (ret), "=&r" (addr), | |
| "=&r" (tmp1), "=&r" (tmp2), "=&r" (tmp3) | |
| : "i" (ASI_PHYS_BYPASS_EC_E), "1" (addr)); | |
| return ret; | |
| } | |
| static void __hbird_write_stick(unsigned long val) | |
| { | |
| unsigned long low = (val & 0xffffffffUL); | |
| unsigned long high = (val >> 32UL); | |
| unsigned long addr = HBIRD_STICK_ADDR; | |
| __asm__ __volatile__("stxa %%g0, [%0] %4\n\t" | |
| "add %0, 0x8, %0\n\t" | |
| "stxa %3, [%0] %4\n\t" | |
| "sub %0, 0x8, %0\n\t" | |
| "stxa %2, [%0] %4" | |
| : "=&r" (addr) | |
| : "0" (addr), "r" (low), "r" (high), | |
| "i" (ASI_PHYS_BYPASS_EC_E)); | |
| } | |
| static void __hbird_write_compare(unsigned long val) | |
| { | |
| unsigned long low = (val & 0xffffffffUL); | |
| unsigned long high = (val >> 32UL); | |
| unsigned long addr = HBIRD_STICKCMP_ADDR + 0x8UL; | |
| __asm__ __volatile__("stxa %3, [%0] %4\n\t" | |
| "sub %0, 0x8, %0\n\t" | |
| "stxa %2, [%0] %4" | |
| : "=&r" (addr) | |
| : "0" (addr), "r" (low), "r" (high), | |
| "i" (ASI_PHYS_BYPASS_EC_E)); | |
| } | |
| static void hbtick_disable_irq(void) | |
| { | |
| __hbird_write_compare(TICKCMP_IRQ_BIT); | |
| } | |
| static void hbtick_init_tick(void) | |
| { | |
| tick_disable_protection(); | |
| /* XXX This seems to be necessary to 'jumpstart' Hummingbird | |
| * XXX into actually sending STICK interrupts. I think because | |
| * XXX of how we store %tick_cmpr in head.S this somehow resets the | |
| * XXX {TICK + STICK} interrupt mux. -DaveM | |
| */ | |
| __hbird_write_stick(__hbird_read_stick()); | |
| hbtick_disable_irq(); | |
| } | |
| static unsigned long long hbtick_get_tick(void) | |
| { | |
| return __hbird_read_stick() & ~TICK_PRIV_BIT; | |
| } | |
| static unsigned long hbtick_add_tick(unsigned long adj) | |
| { | |
| unsigned long val; | |
| val = __hbird_read_stick() + adj; | |
| __hbird_write_stick(val); | |
| return val; | |
| } | |
| static int hbtick_add_compare(unsigned long adj) | |
| { | |
| unsigned long val = __hbird_read_stick(); | |
| unsigned long val2; | |
| val &= ~TICKCMP_IRQ_BIT; | |
| val += adj; | |
| __hbird_write_compare(val); | |
| val2 = __hbird_read_stick() & ~TICKCMP_IRQ_BIT; | |
| return ((long)(val2 - val)) > 0L; | |
| } | |
| static unsigned long hbtick_get_frequency(void) | |
| { | |
| return prom_getintdefault(prom_root_node, "stick-frequency", 0); | |
| } | |
| static struct sparc64_tick_ops hbtick_operations __read_mostly = { | |
| .name = "hbtick", | |
| .init_tick = hbtick_init_tick, | |
| .disable_irq = hbtick_disable_irq, | |
| .get_tick = hbtick_get_tick, | |
| .add_tick = hbtick_add_tick, | |
| .add_compare = hbtick_add_compare, | |
| .get_frequency = hbtick_get_frequency, | |
| .softint_mask = 1UL << 0, | |
| }; | |
| unsigned long cmos_regs; | |
| EXPORT_SYMBOL(cmos_regs); | |
| static struct resource rtc_cmos_resource; | |
| static struct platform_device rtc_cmos_device = { | |
| .name = "rtc_cmos", | |
| .id = -1, | |
| .resource = &rtc_cmos_resource, | |
| .num_resources = 1, | |
| }; | |
| static int rtc_probe(struct platform_device *op) | |
| { | |
| struct resource *r; | |
| printk(KERN_INFO "%s: RTC regs at 0x%llx\n", | |
| op->dev.of_node->full_name, op->resource[0].start); | |
| /* The CMOS RTC driver only accepts IORESOURCE_IO, so cons | |
| * up a fake resource so that the probe works for all cases. | |
| * When the RTC is behind an ISA bus it will have IORESOURCE_IO | |
| * already, whereas when it's behind EBUS is will be IORESOURCE_MEM. | |
| */ | |
| r = &rtc_cmos_resource; | |
| r->flags = IORESOURCE_IO; | |
| r->name = op->resource[0].name; | |
| r->start = op->resource[0].start; | |
| r->end = op->resource[0].end; | |
| cmos_regs = op->resource[0].start; | |
| return platform_device_register(&rtc_cmos_device); | |
| } | |
| static const struct of_device_id rtc_match[] = { | |
| { | |
| .name = "rtc", | |
| .compatible = "m5819", | |
| }, | |
| { | |
| .name = "rtc", | |
| .compatible = "isa-m5819p", | |
| }, | |
| { | |
| .name = "rtc", | |
| .compatible = "isa-m5823p", | |
| }, | |
| { | |
| .name = "rtc", | |
| .compatible = "ds1287", | |
| }, | |
| {}, | |
| }; | |
| static struct platform_driver rtc_driver = { | |
| .probe = rtc_probe, | |
| .driver = { | |
| .name = "rtc", | |
| .of_match_table = rtc_match, | |
| }, | |
| }; | |
| static struct platform_device rtc_bq4802_device = { | |
| .name = "rtc-bq4802", | |
| .id = -1, | |
| .num_resources = 1, | |
| }; | |
| static int bq4802_probe(struct platform_device *op) | |
| { | |
| printk(KERN_INFO "%s: BQ4802 regs at 0x%llx\n", | |
| op->dev.of_node->full_name, op->resource[0].start); | |
| rtc_bq4802_device.resource = &op->resource[0]; | |
| return platform_device_register(&rtc_bq4802_device); | |
| } | |
| static const struct of_device_id bq4802_match[] = { | |
| { | |
| .name = "rtc", | |
| .compatible = "bq4802", | |
| }, | |
| {}, | |
| }; | |
| static struct platform_driver bq4802_driver = { | |
| .probe = bq4802_probe, | |
| .driver = { | |
| .name = "bq4802", | |
| .of_match_table = bq4802_match, | |
| }, | |
| }; | |
| static unsigned char mostek_read_byte(struct device *dev, u32 ofs) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| void __iomem *regs = (void __iomem *) pdev->resource[0].start; | |
| return readb(regs + ofs); | |
| } | |
| static void mostek_write_byte(struct device *dev, u32 ofs, u8 val) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| void __iomem *regs = (void __iomem *) pdev->resource[0].start; | |
| writeb(val, regs + ofs); | |
| } | |
| static struct m48t59_plat_data m48t59_data = { | |
| .read_byte = mostek_read_byte, | |
| .write_byte = mostek_write_byte, | |
| }; | |
| static struct platform_device m48t59_rtc = { | |
| .name = "rtc-m48t59", | |
| .id = 0, | |
| .num_resources = 1, | |
| .dev = { | |
| .platform_data = &m48t59_data, | |
| }, | |
| }; | |
| static int mostek_probe(struct platform_device *op) | |
| { | |
| struct device_node *dp = op->dev.of_node; | |
| /* On an Enterprise system there can be multiple mostek clocks. | |
| * We should only match the one that is on the central FHC bus. | |
| */ | |
| if (!strcmp(dp->parent->name, "fhc") && | |
| strcmp(dp->parent->parent->name, "central") != 0) | |
| return -ENODEV; | |
| printk(KERN_INFO "%s: Mostek regs at 0x%llx\n", | |
| dp->full_name, op->resource[0].start); | |
| m48t59_rtc.resource = &op->resource[0]; | |
| return platform_device_register(&m48t59_rtc); | |
| } | |
| static const struct of_device_id mostek_match[] = { | |
| { | |
| .name = "eeprom", | |
| }, | |
| {}, | |
| }; | |
| static struct platform_driver mostek_driver = { | |
| .probe = mostek_probe, | |
| .driver = { | |
| .name = "mostek", | |
| .of_match_table = mostek_match, | |
| }, | |
| }; | |
| static struct platform_device rtc_sun4v_device = { | |
| .name = "rtc-sun4v", | |
| .id = -1, | |
| }; | |
| static struct platform_device rtc_starfire_device = { | |
| .name = "rtc-starfire", | |
| .id = -1, | |
| }; | |
| static int __init clock_init(void) | |
| { | |
| if (this_is_starfire) | |
| return platform_device_register(&rtc_starfire_device); | |
| if (tlb_type == hypervisor) | |
| return platform_device_register(&rtc_sun4v_device); | |
| (void) platform_driver_register(&rtc_driver); | |
| (void) platform_driver_register(&mostek_driver); | |
| (void) platform_driver_register(&bq4802_driver); | |
| return 0; | |
| } | |
| /* Must be after subsys_initcall() so that busses are probed. Must | |
| * be before device_initcall() because things like the RTC driver | |
| * need to see the clock registers. | |
| */ | |
| fs_initcall(clock_init); | |
| /* Return true if this is Hummingbird, aka Ultra-IIe */ | |
| static bool is_hummingbird(void) | |
| { | |
| unsigned long ver, manuf, impl; | |
| __asm__ __volatile__ ("rdpr %%ver, %0" | |
| : "=&r" (ver)); | |
| manuf = ((ver >> 48) & 0xffff); | |
| impl = ((ver >> 32) & 0xffff); | |
| return (manuf == 0x17 && impl == 0x13); | |
| } | |
| struct freq_table { | |
| unsigned long clock_tick_ref; | |
| unsigned int ref_freq; | |
| }; | |
| static DEFINE_PER_CPU(struct freq_table, sparc64_freq_table) = { 0, 0 }; | |
| unsigned long sparc64_get_clock_tick(unsigned int cpu) | |
| { | |
| struct freq_table *ft = &per_cpu(sparc64_freq_table, cpu); | |
| if (ft->clock_tick_ref) | |
| return ft->clock_tick_ref; | |
| return cpu_data(cpu).clock_tick; | |
| } | |
| EXPORT_SYMBOL(sparc64_get_clock_tick); | |
| #ifdef CONFIG_CPU_FREQ | |
| static int sparc64_cpufreq_notifier(struct notifier_block *nb, unsigned long val, | |
| void *data) | |
| { | |
| struct cpufreq_freqs *freq = data; | |
| unsigned int cpu = freq->cpu; | |
| struct freq_table *ft = &per_cpu(sparc64_freq_table, cpu); | |
| if (!ft->ref_freq) { | |
| ft->ref_freq = freq->old; | |
| ft->clock_tick_ref = cpu_data(cpu).clock_tick; | |
| } | |
| if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || | |
| (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) { | |
| cpu_data(cpu).clock_tick = | |
| cpufreq_scale(ft->clock_tick_ref, | |
| ft->ref_freq, | |
| freq->new); | |
| } | |
| return 0; | |
| } | |
| static struct notifier_block sparc64_cpufreq_notifier_block = { | |
| .notifier_call = sparc64_cpufreq_notifier | |
| }; | |
| static int __init register_sparc64_cpufreq_notifier(void) | |
| { | |
| cpufreq_register_notifier(&sparc64_cpufreq_notifier_block, | |
| CPUFREQ_TRANSITION_NOTIFIER); | |
| return 0; | |
| } | |
| core_initcall(register_sparc64_cpufreq_notifier); | |
| #endif /* CONFIG_CPU_FREQ */ | |
| static int sparc64_next_event(unsigned long delta, | |
| struct clock_event_device *evt) | |
| { | |
| return tick_operations.add_compare(delta) ? -ETIME : 0; | |
| } | |
| static int sparc64_timer_shutdown(struct clock_event_device *evt) | |
| { | |
| tick_operations.disable_irq(); | |
| return 0; | |
| } | |
| static struct clock_event_device sparc64_clockevent = { | |
| .features = CLOCK_EVT_FEAT_ONESHOT, | |
| .set_state_shutdown = sparc64_timer_shutdown, | |
| .set_next_event = sparc64_next_event, | |
| .rating = 100, | |
| .shift = 30, | |
| .irq = -1, | |
| }; | |
| static DEFINE_PER_CPU(struct clock_event_device, sparc64_events); | |
| void __irq_entry timer_interrupt(int irq, struct pt_regs *regs) | |
| { | |
| struct pt_regs *old_regs = set_irq_regs(regs); | |
| unsigned long tick_mask = tick_operations.softint_mask; | |
| int cpu = smp_processor_id(); | |
| struct clock_event_device *evt = &per_cpu(sparc64_events, cpu); | |
| clear_softint(tick_mask); | |
| irq_enter(); | |
| local_cpu_data().irq0_irqs++; | |
| kstat_incr_irq_this_cpu(0); | |
| if (unlikely(!evt->event_handler)) { | |
| printk(KERN_WARNING | |
| "Spurious SPARC64 timer interrupt on cpu %d\n", cpu); | |
| } else | |
| evt->event_handler(evt); | |
| irq_exit(); | |
| set_irq_regs(old_regs); | |
| } | |
| void setup_sparc64_timer(void) | |
| { | |
| struct clock_event_device *sevt; | |
| unsigned long pstate; | |
| /* Guarantee that the following sequences execute | |
| * uninterrupted. | |
| */ | |
| __asm__ __volatile__("rdpr %%pstate, %0\n\t" | |
| "wrpr %0, %1, %%pstate" | |
| : "=r" (pstate) | |
| : "i" (PSTATE_IE)); | |
| tick_operations.init_tick(); | |
| /* Restore PSTATE_IE. */ | |
| __asm__ __volatile__("wrpr %0, 0x0, %%pstate" | |
| : /* no outputs */ | |
| : "r" (pstate)); | |
| sevt = this_cpu_ptr(&sparc64_events); | |
| memcpy(sevt, &sparc64_clockevent, sizeof(*sevt)); | |
| sevt->cpumask = cpumask_of(smp_processor_id()); | |
| clockevents_register_device(sevt); | |
| } | |
| #define SPARC64_NSEC_PER_CYC_SHIFT 10UL | |
| static struct clocksource clocksource_tick = { | |
| .rating = 100, | |
| .mask = CLOCKSOURCE_MASK(64), | |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, | |
| }; | |
| static unsigned long tb_ticks_per_usec __read_mostly; | |
| void __delay(unsigned long loops) | |
| { | |
| unsigned long bclock = get_tick(); | |
| while ((get_tick() - bclock) < loops) | |
| ; | |
| } | |
| EXPORT_SYMBOL(__delay); | |
| void udelay(unsigned long usecs) | |
| { | |
| __delay(tb_ticks_per_usec * usecs); | |
| } | |
| EXPORT_SYMBOL(udelay); | |
| static u64 clocksource_tick_read(struct clocksource *cs) | |
| { | |
| return get_tick(); | |
| } | |
| static void __init get_tick_patch(void) | |
| { | |
| unsigned int *addr, *instr, i; | |
| struct get_tick_patch *p; | |
| if (tlb_type == spitfire && is_hummingbird()) | |
| return; | |
| for (p = &__get_tick_patch; p < &__get_tick_patch_end; p++) { | |
| instr = (tlb_type == spitfire) ? p->tick : p->stick; | |
| addr = (unsigned int *)(unsigned long)p->addr; | |
| for (i = 0; i < GET_TICK_NINSTR; i++) { | |
| addr[i] = instr[i]; | |
| /* ensure that address is modified before flush */ | |
| wmb(); | |
| flushi(&addr[i]); | |
| } | |
| } | |
| } | |
| static void __init init_tick_ops(struct sparc64_tick_ops *ops) | |
| { | |
| unsigned long freq, quotient, tick; | |
| freq = ops->get_frequency(); | |
| quotient = clocksource_hz2mult(freq, SPARC64_NSEC_PER_CYC_SHIFT); | |
| tick = ops->get_tick(); | |
| ops->offset = (tick * quotient) >> SPARC64_NSEC_PER_CYC_SHIFT; | |
| ops->ticks_per_nsec_quotient = quotient; | |
| ops->frequency = freq; | |
| tick_operations = *ops; | |
| get_tick_patch(); | |
| } | |
| void __init time_init_early(void) | |
| { | |
| if (tlb_type == spitfire) { | |
| if (is_hummingbird()) | |
| init_tick_ops(&hbtick_operations); | |
| else | |
| init_tick_ops(&tick_operations); | |
| } else { | |
| init_tick_ops(&stick_operations); | |
| } | |
| } | |
| void __init time_init(void) | |
| { | |
| unsigned long freq; | |
| freq = tick_operations.frequency; | |
| tb_ticks_per_usec = freq / USEC_PER_SEC; | |
| clocksource_tick.name = tick_operations.name; | |
| clocksource_tick.read = clocksource_tick_read; | |
| clocksource_register_hz(&clocksource_tick, freq); | |
| printk("clocksource: mult[%x] shift[%d]\n", | |
| clocksource_tick.mult, clocksource_tick.shift); | |
| sparc64_clockevent.name = tick_operations.name; | |
| clockevents_calc_mult_shift(&sparc64_clockevent, freq, 4); | |
| sparc64_clockevent.max_delta_ns = | |
| clockevent_delta2ns(0x7fffffffffffffffUL, &sparc64_clockevent); | |
| sparc64_clockevent.max_delta_ticks = 0x7fffffffffffffffUL; | |
| sparc64_clockevent.min_delta_ns = | |
| clockevent_delta2ns(0xF, &sparc64_clockevent); | |
| sparc64_clockevent.min_delta_ticks = 0xF; | |
| printk("clockevent: mult[%x] shift[%d]\n", | |
| sparc64_clockevent.mult, sparc64_clockevent.shift); | |
| setup_sparc64_timer(); | |
| } | |
| unsigned long long sched_clock(void) | |
| { | |
| unsigned long quotient = tick_operations.ticks_per_nsec_quotient; | |
| unsigned long offset = tick_operations.offset; | |
| /* Use barrier so the compiler emits the loads first and overlaps load | |
| * latency with reading tick, because reading %tick/%stick is a | |
| * post-sync instruction that will flush and restart subsequent | |
| * instructions after it commits. | |
| */ | |
| barrier(); | |
| return ((get_tick() * quotient) >> SPARC64_NSEC_PER_CYC_SHIFT) - offset; | |
| } | |
| int read_current_timer(unsigned long *timer_val) | |
| { | |
| *timer_val = get_tick(); | |
| return 0; | |
| } |