| /* Pseudo NMI support on sparc64 systems. | |
| * | |
| * Copyright (C) 2009 David S. Miller <davem@davemloft.net> | |
| * | |
| * The NMI watchdog support and infrastructure is based almost | |
| * entirely upon the x86 NMI support code. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/param.h> | |
| #include <linux/init.h> | |
| #include <linux/percpu.h> | |
| #include <linux/nmi.h> | |
| #include <linux/export.h> | |
| #include <linux/kprobes.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/reboot.h> | |
| #include <linux/slab.h> | |
| #include <linux/kdebug.h> | |
| #include <linux/delay.h> | |
| #include <linux/smp.h> | |
| #include <asm/perf_event.h> | |
| #include <asm/ptrace.h> | |
| #include <asm/pcr.h> | |
| #include "kstack.h" | |
| /* We don't have a real NMI on sparc64, but we can fake one | |
| * up using profiling counter overflow interrupts and interrupt | |
| * levels. | |
| * | |
| * The profile overflow interrupts at level 15, so we use | |
| * level 14 as our IRQ off level. | |
| */ | |
| static int panic_on_timeout; | |
| /* nmi_active: | |
| * >0: the NMI watchdog is active, but can be disabled | |
| * <0: the NMI watchdog has not been set up, and cannot be enabled | |
| * 0: the NMI watchdog is disabled, but can be enabled | |
| */ | |
| atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ | |
| EXPORT_SYMBOL(nmi_active); | |
| static int nmi_init_done; | |
| static unsigned int nmi_hz = HZ; | |
| static DEFINE_PER_CPU(short, wd_enabled); | |
| static int endflag __initdata; | |
| static DEFINE_PER_CPU(unsigned int, last_irq_sum); | |
| static DEFINE_PER_CPU(long, alert_counter); | |
| static DEFINE_PER_CPU(int, nmi_touch); | |
| void arch_touch_nmi_watchdog(void) | |
| { | |
| if (atomic_read(&nmi_active)) { | |
| int cpu; | |
| for_each_present_cpu(cpu) { | |
| if (per_cpu(nmi_touch, cpu) != 1) | |
| per_cpu(nmi_touch, cpu) = 1; | |
| } | |
| } | |
| } | |
| EXPORT_SYMBOL(arch_touch_nmi_watchdog); | |
| static void die_nmi(const char *str, struct pt_regs *regs, int do_panic) | |
| { | |
| int this_cpu = smp_processor_id(); | |
| if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, | |
| pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP) | |
| return; | |
| if (do_panic || panic_on_oops) | |
| panic("Watchdog detected hard LOCKUP on cpu %d", this_cpu); | |
| else | |
| WARN(1, "Watchdog detected hard LOCKUP on cpu %d", this_cpu); | |
| } | |
| notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs) | |
| { | |
| unsigned int sum, touched = 0; | |
| void *orig_sp; | |
| clear_softint(1 << irq); | |
| local_cpu_data().__nmi_count++; | |
| nmi_enter(); | |
| orig_sp = set_hardirq_stack(); | |
| if (notify_die(DIE_NMI, "nmi", regs, 0, | |
| pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP) | |
| touched = 1; | |
| else | |
| pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_disable); | |
| sum = local_cpu_data().irq0_irqs; | |
| if (__this_cpu_read(nmi_touch)) { | |
| __this_cpu_write(nmi_touch, 0); | |
| touched = 1; | |
| } | |
| if (!touched && __this_cpu_read(last_irq_sum) == sum) { | |
| __this_cpu_inc(alert_counter); | |
| if (__this_cpu_read(alert_counter) == 30 * nmi_hz) | |
| die_nmi("BUG: NMI Watchdog detected LOCKUP", | |
| regs, panic_on_timeout); | |
| } else { | |
| __this_cpu_write(last_irq_sum, sum); | |
| __this_cpu_write(alert_counter, 0); | |
| } | |
| if (__this_cpu_read(wd_enabled)) { | |
| pcr_ops->write_pic(0, pcr_ops->nmi_picl_value(nmi_hz)); | |
| pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_enable); | |
| } | |
| restore_hardirq_stack(orig_sp); | |
| nmi_exit(); | |
| } | |
| static inline unsigned int get_nmi_count(int cpu) | |
| { | |
| return cpu_data(cpu).__nmi_count; | |
| } | |
| static __init void nmi_cpu_busy(void *data) | |
| { | |
| while (endflag == 0) | |
| mb(); | |
| } | |
| static void report_broken_nmi(int cpu, int *prev_nmi_count) | |
| { | |
| printk(KERN_CONT "\n"); | |
| printk(KERN_WARNING | |
| "WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n", | |
| cpu, prev_nmi_count[cpu], get_nmi_count(cpu)); | |
| printk(KERN_WARNING | |
| "Please report this to bugzilla.kernel.org,\n"); | |
| printk(KERN_WARNING | |
| "and attach the output of the 'dmesg' command.\n"); | |
| per_cpu(wd_enabled, cpu) = 0; | |
| atomic_dec(&nmi_active); | |
| } | |
| void stop_nmi_watchdog(void *unused) | |
| { | |
| if (!__this_cpu_read(wd_enabled)) | |
| return; | |
| pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_disable); | |
| __this_cpu_write(wd_enabled, 0); | |
| atomic_dec(&nmi_active); | |
| } | |
| static int __init check_nmi_watchdog(void) | |
| { | |
| unsigned int *prev_nmi_count; | |
| int cpu, err; | |
| if (!atomic_read(&nmi_active)) | |
| return 0; | |
| prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(unsigned int), GFP_KERNEL); | |
| if (!prev_nmi_count) { | |
| err = -ENOMEM; | |
| goto error; | |
| } | |
| printk(KERN_INFO "Testing NMI watchdog ... "); | |
| smp_call_function(nmi_cpu_busy, (void *)&endflag, 0); | |
| for_each_possible_cpu(cpu) | |
| prev_nmi_count[cpu] = get_nmi_count(cpu); | |
| local_irq_enable(); | |
| mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */ | |
| for_each_online_cpu(cpu) { | |
| if (!per_cpu(wd_enabled, cpu)) | |
| continue; | |
| if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) | |
| report_broken_nmi(cpu, prev_nmi_count); | |
| } | |
| endflag = 1; | |
| if (!atomic_read(&nmi_active)) { | |
| kfree(prev_nmi_count); | |
| atomic_set(&nmi_active, -1); | |
| err = -ENODEV; | |
| goto error; | |
| } | |
| printk("OK.\n"); | |
| nmi_hz = 1; | |
| kfree(prev_nmi_count); | |
| return 0; | |
| error: | |
| on_each_cpu(stop_nmi_watchdog, NULL, 1); | |
| return err; | |
| } | |
| void start_nmi_watchdog(void *unused) | |
| { | |
| if (__this_cpu_read(wd_enabled)) | |
| return; | |
| __this_cpu_write(wd_enabled, 1); | |
| atomic_inc(&nmi_active); | |
| pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_disable); | |
| pcr_ops->write_pic(0, pcr_ops->nmi_picl_value(nmi_hz)); | |
| pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_enable); | |
| } | |
| static void nmi_adjust_hz_one(void *unused) | |
| { | |
| if (!__this_cpu_read(wd_enabled)) | |
| return; | |
| pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_disable); | |
| pcr_ops->write_pic(0, pcr_ops->nmi_picl_value(nmi_hz)); | |
| pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_enable); | |
| } | |
| void nmi_adjust_hz(unsigned int new_hz) | |
| { | |
| nmi_hz = new_hz; | |
| on_each_cpu(nmi_adjust_hz_one, NULL, 1); | |
| } | |
| EXPORT_SYMBOL_GPL(nmi_adjust_hz); | |
| static int nmi_shutdown(struct notifier_block *nb, unsigned long cmd, void *p) | |
| { | |
| on_each_cpu(stop_nmi_watchdog, NULL, 1); | |
| return 0; | |
| } | |
| static struct notifier_block nmi_reboot_notifier = { | |
| .notifier_call = nmi_shutdown, | |
| }; | |
| int __init nmi_init(void) | |
| { | |
| int err; | |
| on_each_cpu(start_nmi_watchdog, NULL, 1); | |
| err = check_nmi_watchdog(); | |
| if (!err) { | |
| err = register_reboot_notifier(&nmi_reboot_notifier); | |
| if (err) { | |
| on_each_cpu(stop_nmi_watchdog, NULL, 1); | |
| atomic_set(&nmi_active, -1); | |
| } | |
| } | |
| nmi_init_done = 1; | |
| return err; | |
| } | |
| static int __init setup_nmi_watchdog(char *str) | |
| { | |
| if (!strncmp(str, "panic", 5)) | |
| panic_on_timeout = 1; | |
| return 0; | |
| } | |
| __setup("nmi_watchdog=", setup_nmi_watchdog); | |
| /* | |
| * sparc specific NMI watchdog enable function. | |
| * Enables watchdog if it is not enabled already. | |
| */ | |
| int watchdog_nmi_enable(unsigned int cpu) | |
| { | |
| if (atomic_read(&nmi_active) == -1) { | |
| pr_warn("NMI watchdog cannot be enabled or disabled\n"); | |
| return -1; | |
| } | |
| /* | |
| * watchdog thread could start even before nmi_init is called. | |
| * Just Return in that case. Let nmi_init finish the init | |
| * process first. | |
| */ | |
| if (!nmi_init_done) | |
| return 0; | |
| smp_call_function_single(cpu, start_nmi_watchdog, NULL, 1); | |
| return 0; | |
| } | |
| /* | |
| * sparc specific NMI watchdog disable function. | |
| * Disables watchdog if it is not disabled already. | |
| */ | |
| void watchdog_nmi_disable(unsigned int cpu) | |
| { | |
| if (atomic_read(&nmi_active) == -1) | |
| pr_warn_once("NMI watchdog cannot be enabled or disabled\n"); | |
| else | |
| smp_call_function_single(cpu, stop_nmi_watchdog, NULL, 1); | |
| } |