| Broadcom USB Device Controller (BDC) | |
| ==================================== | |
| Required properties: | |
| - compatible: must be one of: | |
| "brcm,bdc-v0.16" | |
| "brcm,bdc" | |
| - reg: the base register address and length | |
| - interrupts: the interrupt line for this controller | |
| Optional properties: | |
| On Broadcom STB platforms, these properties are required: | |
| - phys: phandle to one or two USB PHY blocks | |
| NOTE: Some SoC's have a single phy and some have | |
| USB 2.0 and USB 3.0 phys | |
| - clocks: phandle to the functional clock of this block | |
| Example: | |
| bdc@f0b02000 { | |
| compatible = "brcm,bdc-v0.16"; | |
| reg = <0xf0b02000 0xfc4>; | |
| interrupts = <0x0 0x60 0x0>; | |
| phys = <&usbphy_0 0x0>; | |
| clocks = <&sw_usbd>; | |
| }; |