| /* | |
| * wm8523.c -- WM8523 ALSA SoC Audio driver | |
| * | |
| * Copyright 2009 Wolfson Microelectronics plc | |
| * | |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | |
| * | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/init.h> | |
| #include <linux/delay.h> | |
| #include <linux/pm.h> | |
| #include <linux/i2c.h> | |
| #include <linux/regmap.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/slab.h> | |
| #include <linux/of_device.h> | |
| #include <sound/core.h> | |
| #include <sound/pcm.h> | |
| #include <sound/pcm_params.h> | |
| #include <sound/soc.h> | |
| #include <sound/initval.h> | |
| #include <sound/tlv.h> | |
| #include "wm8523.h" | |
| #define WM8523_NUM_SUPPLIES 2 | |
| static const char *wm8523_supply_names[WM8523_NUM_SUPPLIES] = { | |
| "AVDD", | |
| "LINEVDD", | |
| }; | |
| #define WM8523_NUM_RATES 7 | |
| /* codec private data */ | |
| struct wm8523_priv { | |
| struct regmap *regmap; | |
| struct regulator_bulk_data supplies[WM8523_NUM_SUPPLIES]; | |
| unsigned int sysclk; | |
| unsigned int rate_constraint_list[WM8523_NUM_RATES]; | |
| struct snd_pcm_hw_constraint_list rate_constraint; | |
| }; | |
| static const struct reg_default wm8523_reg_defaults[] = { | |
| { 2, 0x0000 }, /* R2 - PSCTRL1 */ | |
| { 3, 0x1812 }, /* R3 - AIF_CTRL1 */ | |
| { 4, 0x0000 }, /* R4 - AIF_CTRL2 */ | |
| { 5, 0x0001 }, /* R5 - DAC_CTRL3 */ | |
| { 6, 0x0190 }, /* R6 - DAC_GAINL */ | |
| { 7, 0x0190 }, /* R7 - DAC_GAINR */ | |
| { 8, 0x0000 }, /* R8 - ZERO_DETECT */ | |
| }; | |
| static bool wm8523_volatile_register(struct device *dev, unsigned int reg) | |
| { | |
| switch (reg) { | |
| case WM8523_DEVICE_ID: | |
| case WM8523_REVISION: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static const DECLARE_TLV_DB_SCALE(dac_tlv, -10000, 25, 0); | |
| static const char *wm8523_zd_count_text[] = { | |
| "1024", | |
| "2048", | |
| }; | |
| static SOC_ENUM_SINGLE_DECL(wm8523_zc_count, WM8523_ZERO_DETECT, 0, | |
| wm8523_zd_count_text); | |
| static const struct snd_kcontrol_new wm8523_controls[] = { | |
| SOC_DOUBLE_R_TLV("Playback Volume", WM8523_DAC_GAINL, WM8523_DAC_GAINR, | |
| 0, 448, 0, dac_tlv), | |
| SOC_SINGLE("ZC Switch", WM8523_DAC_CTRL3, 4, 1, 0), | |
| SOC_SINGLE("Playback Deemphasis Switch", WM8523_AIF_CTRL1, 8, 1, 0), | |
| SOC_DOUBLE("Playback Switch", WM8523_DAC_CTRL3, 2, 3, 1, 1), | |
| SOC_SINGLE("Volume Ramp Up Switch", WM8523_DAC_CTRL3, 1, 1, 0), | |
| SOC_SINGLE("Volume Ramp Down Switch", WM8523_DAC_CTRL3, 0, 1, 0), | |
| SOC_ENUM("Zero Detect Count", wm8523_zc_count), | |
| }; | |
| static const struct snd_soc_dapm_widget wm8523_dapm_widgets[] = { | |
| SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0), | |
| SND_SOC_DAPM_OUTPUT("LINEVOUTL"), | |
| SND_SOC_DAPM_OUTPUT("LINEVOUTR"), | |
| }; | |
| static const struct snd_soc_dapm_route wm8523_dapm_routes[] = { | |
| { "LINEVOUTL", NULL, "DAC" }, | |
| { "LINEVOUTR", NULL, "DAC" }, | |
| }; | |
| static const struct { | |
| int value; | |
| int ratio; | |
| } lrclk_ratios[WM8523_NUM_RATES] = { | |
| { 1, 128 }, | |
| { 2, 192 }, | |
| { 3, 256 }, | |
| { 4, 384 }, | |
| { 5, 512 }, | |
| { 6, 768 }, | |
| { 7, 1152 }, | |
| }; | |
| static const struct { | |
| int value; | |
| int ratio; | |
| } bclk_ratios[] = { | |
| { 2, 32 }, | |
| { 3, 64 }, | |
| { 4, 128 }, | |
| }; | |
| static int wm8523_startup(struct snd_pcm_substream *substream, | |
| struct snd_soc_dai *dai) | |
| { | |
| struct snd_soc_codec *codec = dai->codec; | |
| struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec); | |
| /* The set of sample rates that can be supported depends on the | |
| * MCLK supplied to the CODEC - enforce this. | |
| */ | |
| if (!wm8523->sysclk) { | |
| dev_err(codec->dev, | |
| "No MCLK configured, call set_sysclk() on init\n"); | |
| return -EINVAL; | |
| } | |
| snd_pcm_hw_constraint_list(substream->runtime, 0, | |
| SNDRV_PCM_HW_PARAM_RATE, | |
| &wm8523->rate_constraint); | |
| return 0; | |
| } | |
| static int wm8523_hw_params(struct snd_pcm_substream *substream, | |
| struct snd_pcm_hw_params *params, | |
| struct snd_soc_dai *dai) | |
| { | |
| struct snd_soc_codec *codec = dai->codec; | |
| struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec); | |
| int i; | |
| u16 aifctrl1 = snd_soc_read(codec, WM8523_AIF_CTRL1); | |
| u16 aifctrl2 = snd_soc_read(codec, WM8523_AIF_CTRL2); | |
| /* Find a supported LRCLK ratio */ | |
| for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) { | |
| if (wm8523->sysclk / params_rate(params) == | |
| lrclk_ratios[i].ratio) | |
| break; | |
| } | |
| /* Should never happen, should be handled by constraints */ | |
| if (i == ARRAY_SIZE(lrclk_ratios)) { | |
| dev_err(codec->dev, "MCLK/fs ratio %d unsupported\n", | |
| wm8523->sysclk / params_rate(params)); | |
| return -EINVAL; | |
| } | |
| aifctrl2 &= ~WM8523_SR_MASK; | |
| aifctrl2 |= lrclk_ratios[i].value; | |
| if (aifctrl1 & WM8523_AIF_MSTR) { | |
| /* Find a fs->bclk ratio */ | |
| for (i = 0; i < ARRAY_SIZE(bclk_ratios); i++) | |
| if (params_width(params) * 2 <= bclk_ratios[i].ratio) | |
| break; | |
| if (i == ARRAY_SIZE(bclk_ratios)) { | |
| dev_err(codec->dev, | |
| "No matching BCLK/fs ratio for word length %d\n", | |
| params_width(params)); | |
| return -EINVAL; | |
| } | |
| aifctrl2 &= ~WM8523_BCLKDIV_MASK; | |
| aifctrl2 |= bclk_ratios[i].value << WM8523_BCLKDIV_SHIFT; | |
| } | |
| aifctrl1 &= ~WM8523_WL_MASK; | |
| switch (params_width(params)) { | |
| case 16: | |
| break; | |
| case 20: | |
| aifctrl1 |= 0x8; | |
| break; | |
| case 24: | |
| aifctrl1 |= 0x10; | |
| break; | |
| case 32: | |
| aifctrl1 |= 0x18; | |
| break; | |
| } | |
| snd_soc_write(codec, WM8523_AIF_CTRL1, aifctrl1); | |
| snd_soc_write(codec, WM8523_AIF_CTRL2, aifctrl2); | |
| return 0; | |
| } | |
| static int wm8523_set_dai_sysclk(struct snd_soc_dai *codec_dai, | |
| int clk_id, unsigned int freq, int dir) | |
| { | |
| struct snd_soc_codec *codec = codec_dai->codec; | |
| struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec); | |
| unsigned int val; | |
| int i; | |
| wm8523->sysclk = freq; | |
| wm8523->rate_constraint.count = 0; | |
| for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) { | |
| val = freq / lrclk_ratios[i].ratio; | |
| /* Check that it's a standard rate since core can't | |
| * cope with others and having the odd rates confuses | |
| * constraint matching. | |
| */ | |
| switch (val) { | |
| case 8000: | |
| case 11025: | |
| case 16000: | |
| case 22050: | |
| case 32000: | |
| case 44100: | |
| case 48000: | |
| case 64000: | |
| case 88200: | |
| case 96000: | |
| case 176400: | |
| case 192000: | |
| dev_dbg(codec->dev, "Supported sample rate: %dHz\n", | |
| val); | |
| wm8523->rate_constraint_list[i] = val; | |
| wm8523->rate_constraint.count++; | |
| break; | |
| default: | |
| dev_dbg(codec->dev, "Skipping sample rate: %dHz\n", | |
| val); | |
| } | |
| } | |
| /* Need at least one supported rate... */ | |
| if (wm8523->rate_constraint.count == 0) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int wm8523_set_dai_fmt(struct snd_soc_dai *codec_dai, | |
| unsigned int fmt) | |
| { | |
| struct snd_soc_codec *codec = codec_dai->codec; | |
| u16 aifctrl1 = snd_soc_read(codec, WM8523_AIF_CTRL1); | |
| aifctrl1 &= ~(WM8523_BCLK_INV_MASK | WM8523_LRCLK_INV_MASK | | |
| WM8523_FMT_MASK | WM8523_AIF_MSTR_MASK); | |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { | |
| case SND_SOC_DAIFMT_CBM_CFM: | |
| aifctrl1 |= WM8523_AIF_MSTR; | |
| break; | |
| case SND_SOC_DAIFMT_CBS_CFS: | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | |
| case SND_SOC_DAIFMT_I2S: | |
| aifctrl1 |= 0x0002; | |
| break; | |
| case SND_SOC_DAIFMT_RIGHT_J: | |
| break; | |
| case SND_SOC_DAIFMT_LEFT_J: | |
| aifctrl1 |= 0x0001; | |
| break; | |
| case SND_SOC_DAIFMT_DSP_A: | |
| aifctrl1 |= 0x0003; | |
| break; | |
| case SND_SOC_DAIFMT_DSP_B: | |
| aifctrl1 |= 0x0023; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | |
| case SND_SOC_DAIFMT_NB_NF: | |
| break; | |
| case SND_SOC_DAIFMT_IB_IF: | |
| aifctrl1 |= WM8523_BCLK_INV | WM8523_LRCLK_INV; | |
| break; | |
| case SND_SOC_DAIFMT_IB_NF: | |
| aifctrl1 |= WM8523_BCLK_INV; | |
| break; | |
| case SND_SOC_DAIFMT_NB_IF: | |
| aifctrl1 |= WM8523_LRCLK_INV; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| snd_soc_write(codec, WM8523_AIF_CTRL1, aifctrl1); | |
| return 0; | |
| } | |
| static int wm8523_set_bias_level(struct snd_soc_codec *codec, | |
| enum snd_soc_bias_level level) | |
| { | |
| struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec); | |
| int ret; | |
| switch (level) { | |
| case SND_SOC_BIAS_ON: | |
| break; | |
| case SND_SOC_BIAS_PREPARE: | |
| /* Full power on */ | |
| snd_soc_update_bits(codec, WM8523_PSCTRL1, | |
| WM8523_SYS_ENA_MASK, 3); | |
| break; | |
| case SND_SOC_BIAS_STANDBY: | |
| if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { | |
| ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies), | |
| wm8523->supplies); | |
| if (ret != 0) { | |
| dev_err(codec->dev, | |
| "Failed to enable supplies: %d\n", | |
| ret); | |
| return ret; | |
| } | |
| /* Sync back default/cached values */ | |
| regcache_sync(wm8523->regmap); | |
| /* Initial power up */ | |
| snd_soc_update_bits(codec, WM8523_PSCTRL1, | |
| WM8523_SYS_ENA_MASK, 1); | |
| msleep(100); | |
| } | |
| /* Power up to mute */ | |
| snd_soc_update_bits(codec, WM8523_PSCTRL1, | |
| WM8523_SYS_ENA_MASK, 2); | |
| break; | |
| case SND_SOC_BIAS_OFF: | |
| /* The chip runs through the power down sequence for us. */ | |
| snd_soc_update_bits(codec, WM8523_PSCTRL1, | |
| WM8523_SYS_ENA_MASK, 0); | |
| msleep(100); | |
| regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), | |
| wm8523->supplies); | |
| break; | |
| } | |
| return 0; | |
| } | |
| #define WM8523_RATES SNDRV_PCM_RATE_8000_192000 | |
| #define WM8523_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ | |
| SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) | |
| static const struct snd_soc_dai_ops wm8523_dai_ops = { | |
| .startup = wm8523_startup, | |
| .hw_params = wm8523_hw_params, | |
| .set_sysclk = wm8523_set_dai_sysclk, | |
| .set_fmt = wm8523_set_dai_fmt, | |
| }; | |
| static struct snd_soc_dai_driver wm8523_dai = { | |
| .name = "wm8523-hifi", | |
| .playback = { | |
| .stream_name = "Playback", | |
| .channels_min = 2, /* Mono modes not yet supported */ | |
| .channels_max = 2, | |
| .rates = WM8523_RATES, | |
| .formats = WM8523_FORMATS, | |
| }, | |
| .ops = &wm8523_dai_ops, | |
| }; | |
| static int wm8523_probe(struct snd_soc_codec *codec) | |
| { | |
| struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec); | |
| wm8523->rate_constraint.list = &wm8523->rate_constraint_list[0]; | |
| wm8523->rate_constraint.count = | |
| ARRAY_SIZE(wm8523->rate_constraint_list); | |
| /* Change some default settings - latch VU and enable ZC */ | |
| snd_soc_update_bits(codec, WM8523_DAC_GAINR, | |
| WM8523_DACR_VU, WM8523_DACR_VU); | |
| snd_soc_update_bits(codec, WM8523_DAC_CTRL3, WM8523_ZC, WM8523_ZC); | |
| return 0; | |
| } | |
| static const struct snd_soc_codec_driver soc_codec_dev_wm8523 = { | |
| .probe = wm8523_probe, | |
| .set_bias_level = wm8523_set_bias_level, | |
| .suspend_bias_off = true, | |
| .component_driver = { | |
| .controls = wm8523_controls, | |
| .num_controls = ARRAY_SIZE(wm8523_controls), | |
| .dapm_widgets = wm8523_dapm_widgets, | |
| .num_dapm_widgets = ARRAY_SIZE(wm8523_dapm_widgets), | |
| .dapm_routes = wm8523_dapm_routes, | |
| .num_dapm_routes = ARRAY_SIZE(wm8523_dapm_routes), | |
| }, | |
| }; | |
| static const struct of_device_id wm8523_of_match[] = { | |
| { .compatible = "wlf,wm8523" }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, wm8523_of_match); | |
| static const struct regmap_config wm8523_regmap = { | |
| .reg_bits = 8, | |
| .val_bits = 16, | |
| .max_register = WM8523_ZERO_DETECT, | |
| .reg_defaults = wm8523_reg_defaults, | |
| .num_reg_defaults = ARRAY_SIZE(wm8523_reg_defaults), | |
| .cache_type = REGCACHE_RBTREE, | |
| .volatile_reg = wm8523_volatile_register, | |
| }; | |
| static int wm8523_i2c_probe(struct i2c_client *i2c, | |
| const struct i2c_device_id *id) | |
| { | |
| struct wm8523_priv *wm8523; | |
| unsigned int val; | |
| int ret, i; | |
| wm8523 = devm_kzalloc(&i2c->dev, sizeof(struct wm8523_priv), | |
| GFP_KERNEL); | |
| if (wm8523 == NULL) | |
| return -ENOMEM; | |
| wm8523->regmap = devm_regmap_init_i2c(i2c, &wm8523_regmap); | |
| if (IS_ERR(wm8523->regmap)) { | |
| ret = PTR_ERR(wm8523->regmap); | |
| dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret); | |
| return ret; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(wm8523->supplies); i++) | |
| wm8523->supplies[i].supply = wm8523_supply_names[i]; | |
| ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8523->supplies), | |
| wm8523->supplies); | |
| if (ret != 0) { | |
| dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); | |
| return ret; | |
| } | |
| ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies), | |
| wm8523->supplies); | |
| if (ret != 0) { | |
| dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); | |
| return ret; | |
| } | |
| ret = regmap_read(wm8523->regmap, WM8523_DEVICE_ID, &val); | |
| if (ret < 0) { | |
| dev_err(&i2c->dev, "Failed to read ID register\n"); | |
| goto err_enable; | |
| } | |
| if (val != 0x8523) { | |
| dev_err(&i2c->dev, "Device is not a WM8523, ID is %x\n", ret); | |
| ret = -EINVAL; | |
| goto err_enable; | |
| } | |
| ret = regmap_read(wm8523->regmap, WM8523_REVISION, &val); | |
| if (ret < 0) { | |
| dev_err(&i2c->dev, "Failed to read revision register\n"); | |
| goto err_enable; | |
| } | |
| dev_info(&i2c->dev, "revision %c\n", | |
| (val & WM8523_CHIP_REV_MASK) + 'A'); | |
| ret = regmap_write(wm8523->regmap, WM8523_DEVICE_ID, 0x8523); | |
| if (ret != 0) { | |
| dev_err(&i2c->dev, "Failed to reset device: %d\n", ret); | |
| goto err_enable; | |
| } | |
| regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies); | |
| i2c_set_clientdata(i2c, wm8523); | |
| ret = snd_soc_register_codec(&i2c->dev, | |
| &soc_codec_dev_wm8523, &wm8523_dai, 1); | |
| return ret; | |
| err_enable: | |
| regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies); | |
| return ret; | |
| } | |
| static int wm8523_i2c_remove(struct i2c_client *client) | |
| { | |
| snd_soc_unregister_codec(&client->dev); | |
| return 0; | |
| } | |
| static const struct i2c_device_id wm8523_i2c_id[] = { | |
| { "wm8523", 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, wm8523_i2c_id); | |
| static struct i2c_driver wm8523_i2c_driver = { | |
| .driver = { | |
| .name = "wm8523", | |
| .of_match_table = wm8523_of_match, | |
| }, | |
| .probe = wm8523_i2c_probe, | |
| .remove = wm8523_i2c_remove, | |
| .id_table = wm8523_i2c_id, | |
| }; | |
| module_i2c_driver(wm8523_i2c_driver); | |
| MODULE_DESCRIPTION("ASoC WM8523 driver"); | |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | |
| MODULE_LICENSE("GPL"); |