| /* | |
| * LCD panel support for the TI OMAP OSK board | |
| * | |
| * Copyright (C) 2004 Nokia Corporation | |
| * Author: Imre Deak <imre.deak@nokia.com> | |
| * Adapted for OSK by <dirk.behme@de.bosch.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/gpio.h> | |
| #include <mach/hardware.h> | |
| #include <mach/mux.h> | |
| #include "omapfb.h" | |
| static int osk_panel_enable(struct lcd_panel *panel) | |
| { | |
| /* configure PWL pin */ | |
| omap_cfg_reg(PWL); | |
| /* Enable PWL unit */ | |
| omap_writeb(0x01, OMAP_PWL_CLK_ENABLE); | |
| /* Set PWL level */ | |
| omap_writeb(0xFF, OMAP_PWL_ENABLE); | |
| /* set GPIO2 high (lcd power enabled) */ | |
| gpio_set_value(2, 1); | |
| return 0; | |
| } | |
| static void osk_panel_disable(struct lcd_panel *panel) | |
| { | |
| /* Set PWL level to zero */ | |
| omap_writeb(0x00, OMAP_PWL_ENABLE); | |
| /* Disable PWL unit */ | |
| omap_writeb(0x00, OMAP_PWL_CLK_ENABLE); | |
| /* set GPIO2 low */ | |
| gpio_set_value(2, 0); | |
| } | |
| static struct lcd_panel osk_panel = { | |
| .name = "osk", | |
| .config = OMAP_LCDC_PANEL_TFT, | |
| .bpp = 16, | |
| .data_lines = 16, | |
| .x_res = 240, | |
| .y_res = 320, | |
| .pixel_clock = 12500, | |
| .hsw = 40, | |
| .hfp = 40, | |
| .hbp = 72, | |
| .vsw = 1, | |
| .vfp = 1, | |
| .vbp = 0, | |
| .pcd = 12, | |
| .enable = osk_panel_enable, | |
| .disable = osk_panel_disable, | |
| }; | |
| static int osk_panel_probe(struct platform_device *pdev) | |
| { | |
| omapfb_register_panel(&osk_panel); | |
| return 0; | |
| } | |
| static struct platform_driver osk_panel_driver = { | |
| .probe = osk_panel_probe, | |
| .driver = { | |
| .name = "lcd_osk", | |
| }, | |
| }; | |
| module_platform_driver(osk_panel_driver); |