| /* | |
| * Driver for MMC and SSD cards for Cavium OCTEON SOCs. | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| * | |
| * Copyright (C) 2012-2017 Cavium Inc. | |
| */ | |
| #include <linux/dma-mapping.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/mmc/mmc.h> | |
| #include <linux/mmc/slot-gpio.h> | |
| #include <linux/module.h> | |
| #include <linux/of_platform.h> | |
| #include <asm/octeon/octeon.h> | |
| #include "cavium.h" | |
| #define CVMX_MIO_BOOT_CTL CVMX_ADD_IO_SEG(0x00011800000000D0ull) | |
| /* | |
| * The l2c* functions below are used for the EMMC-17978 workaround. | |
| * | |
| * Due to a bug in the design of the MMC bus hardware, the 2nd to last | |
| * cache block of a DMA read must be locked into the L2 Cache. | |
| * Otherwise, data corruption may occur. | |
| */ | |
| static inline void *phys_to_ptr(u64 address) | |
| { | |
| return (void *)(address | (1ull << 63)); /* XKPHYS */ | |
| } | |
| /* | |
| * Lock a single line into L2. The line is zeroed before locking | |
| * to make sure no dram accesses are made. | |
| */ | |
| static void l2c_lock_line(u64 addr) | |
| { | |
| char *addr_ptr = phys_to_ptr(addr); | |
| asm volatile ( | |
| "cache 31, %[line]" /* Unlock the line */ | |
| ::[line] "m" (*addr_ptr)); | |
| } | |
| /* Unlock a single line in the L2 cache. */ | |
| static void l2c_unlock_line(u64 addr) | |
| { | |
| char *addr_ptr = phys_to_ptr(addr); | |
| asm volatile ( | |
| "cache 23, %[line]" /* Unlock the line */ | |
| ::[line] "m" (*addr_ptr)); | |
| } | |
| /* Locks a memory region in the L2 cache. */ | |
| static void l2c_lock_mem_region(u64 start, u64 len) | |
| { | |
| u64 end; | |
| /* Round start/end to cache line boundaries */ | |
| end = ALIGN(start + len - 1, CVMX_CACHE_LINE_SIZE); | |
| start = ALIGN(start, CVMX_CACHE_LINE_SIZE); | |
| while (start <= end) { | |
| l2c_lock_line(start); | |
| start += CVMX_CACHE_LINE_SIZE; | |
| } | |
| asm volatile("sync"); | |
| } | |
| /* Unlock a memory region in the L2 cache. */ | |
| static void l2c_unlock_mem_region(u64 start, u64 len) | |
| { | |
| u64 end; | |
| /* Round start/end to cache line boundaries */ | |
| end = ALIGN(start + len - 1, CVMX_CACHE_LINE_SIZE); | |
| start = ALIGN(start, CVMX_CACHE_LINE_SIZE); | |
| while (start <= end) { | |
| l2c_unlock_line(start); | |
| start += CVMX_CACHE_LINE_SIZE; | |
| } | |
| } | |
| static void octeon_mmc_acquire_bus(struct cvm_mmc_host *host) | |
| { | |
| if (!host->has_ciu3) { | |
| down(&octeon_bootbus_sem); | |
| /* For CN70XX, switch the MMC controller onto the bus. */ | |
| if (OCTEON_IS_MODEL(OCTEON_CN70XX)) | |
| writeq(0, (void __iomem *)CVMX_MIO_BOOT_CTL); | |
| } else { | |
| down(&host->mmc_serializer); | |
| } | |
| } | |
| static void octeon_mmc_release_bus(struct cvm_mmc_host *host) | |
| { | |
| if (!host->has_ciu3) | |
| up(&octeon_bootbus_sem); | |
| else | |
| up(&host->mmc_serializer); | |
| } | |
| static void octeon_mmc_int_enable(struct cvm_mmc_host *host, u64 val) | |
| { | |
| writeq(val, host->base + MIO_EMM_INT(host)); | |
| if (!host->has_ciu3) | |
| writeq(val, host->base + MIO_EMM_INT_EN(host)); | |
| } | |
| static void octeon_mmc_set_shared_power(struct cvm_mmc_host *host, int dir) | |
| { | |
| if (dir == 0) | |
| if (!atomic_dec_return(&host->shared_power_users)) | |
| gpiod_set_value_cansleep(host->global_pwr_gpiod, 0); | |
| if (dir == 1) | |
| if (atomic_inc_return(&host->shared_power_users) == 1) | |
| gpiod_set_value_cansleep(host->global_pwr_gpiod, 1); | |
| } | |
| static void octeon_mmc_dmar_fixup(struct cvm_mmc_host *host, | |
| struct mmc_command *cmd, | |
| struct mmc_data *data, | |
| u64 addr) | |
| { | |
| if (cmd->opcode != MMC_WRITE_MULTIPLE_BLOCK) | |
| return; | |
| if (data->blksz * data->blocks <= 1024) | |
| return; | |
| host->n_minus_one = addr + (data->blksz * data->blocks) - 1024; | |
| l2c_lock_mem_region(host->n_minus_one, 512); | |
| } | |
| static void octeon_mmc_dmar_fixup_done(struct cvm_mmc_host *host) | |
| { | |
| if (!host->n_minus_one) | |
| return; | |
| l2c_unlock_mem_region(host->n_minus_one, 512); | |
| host->n_minus_one = 0; | |
| } | |
| static int octeon_mmc_probe(struct platform_device *pdev) | |
| { | |
| struct device_node *cn, *node = pdev->dev.of_node; | |
| struct cvm_mmc_host *host; | |
| struct resource *res; | |
| void __iomem *base; | |
| int mmc_irq[9]; | |
| int i, ret = 0; | |
| u64 val; | |
| host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); | |
| if (!host) | |
| return -ENOMEM; | |
| spin_lock_init(&host->irq_handler_lock); | |
| sema_init(&host->mmc_serializer, 1); | |
| host->dev = &pdev->dev; | |
| host->acquire_bus = octeon_mmc_acquire_bus; | |
| host->release_bus = octeon_mmc_release_bus; | |
| host->int_enable = octeon_mmc_int_enable; | |
| host->set_shared_power = octeon_mmc_set_shared_power; | |
| if (OCTEON_IS_MODEL(OCTEON_CN6XXX) || | |
| OCTEON_IS_MODEL(OCTEON_CNF7XXX)) { | |
| host->dmar_fixup = octeon_mmc_dmar_fixup; | |
| host->dmar_fixup_done = octeon_mmc_dmar_fixup_done; | |
| } | |
| host->sys_freq = octeon_get_io_clock_rate(); | |
| if (of_device_is_compatible(node, "cavium,octeon-7890-mmc")) { | |
| host->big_dma_addr = true; | |
| host->need_irq_handler_lock = true; | |
| host->has_ciu3 = true; | |
| host->use_sg = true; | |
| /* | |
| * First seven are the EMM_INT bits 0..6, then two for | |
| * the EMM_DMA_INT bits | |
| */ | |
| for (i = 0; i < 9; i++) { | |
| mmc_irq[i] = platform_get_irq(pdev, i); | |
| if (mmc_irq[i] < 0) | |
| return mmc_irq[i]; | |
| /* work around legacy u-boot device trees */ | |
| irq_set_irq_type(mmc_irq[i], IRQ_TYPE_EDGE_RISING); | |
| } | |
| } else { | |
| host->big_dma_addr = false; | |
| host->need_irq_handler_lock = false; | |
| host->has_ciu3 = false; | |
| /* First one is EMM second DMA */ | |
| for (i = 0; i < 2; i++) { | |
| mmc_irq[i] = platform_get_irq(pdev, i); | |
| if (mmc_irq[i] < 0) | |
| return mmc_irq[i]; | |
| } | |
| } | |
| host->last_slot = -1; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!res) { | |
| dev_err(&pdev->dev, "Platform resource[0] is missing\n"); | |
| return -ENXIO; | |
| } | |
| base = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(base)) | |
| return PTR_ERR(base); | |
| host->base = (void __iomem *)base; | |
| host->reg_off = 0; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); | |
| if (!res) { | |
| dev_err(&pdev->dev, "Platform resource[1] is missing\n"); | |
| return -EINVAL; | |
| } | |
| base = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(base)) | |
| return PTR_ERR(base); | |
| host->dma_base = (void __iomem *)base; | |
| /* | |
| * To keep the register addresses shared we intentionaly use | |
| * a negative offset here, first register used on Octeon therefore | |
| * starts at 0x20 (MIO_EMM_DMA_CFG). | |
| */ | |
| host->reg_off_dma = -0x20; | |
| ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); | |
| if (ret) | |
| return ret; | |
| /* | |
| * Clear out any pending interrupts that may be left over from | |
| * bootloader. | |
| */ | |
| val = readq(host->base + MIO_EMM_INT(host)); | |
| writeq(val, host->base + MIO_EMM_INT(host)); | |
| if (host->has_ciu3) { | |
| /* Only CMD_DONE, DMA_DONE, CMD_ERR, DMA_ERR */ | |
| for (i = 1; i <= 4; i++) { | |
| ret = devm_request_irq(&pdev->dev, mmc_irq[i], | |
| cvm_mmc_interrupt, | |
| 0, cvm_mmc_irq_names[i], host); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "Error: devm_request_irq %d\n", | |
| mmc_irq[i]); | |
| return ret; | |
| } | |
| } | |
| } else { | |
| ret = devm_request_irq(&pdev->dev, mmc_irq[0], | |
| cvm_mmc_interrupt, 0, KBUILD_MODNAME, | |
| host); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "Error: devm_request_irq %d\n", | |
| mmc_irq[0]); | |
| return ret; | |
| } | |
| } | |
| host->global_pwr_gpiod = devm_gpiod_get_optional(&pdev->dev, | |
| "power", | |
| GPIOD_OUT_HIGH); | |
| if (IS_ERR(host->global_pwr_gpiod)) { | |
| dev_err(&pdev->dev, "Invalid power GPIO\n"); | |
| return PTR_ERR(host->global_pwr_gpiod); | |
| } | |
| platform_set_drvdata(pdev, host); | |
| i = 0; | |
| for_each_child_of_node(node, cn) { | |
| host->slot_pdev[i] = | |
| of_platform_device_create(cn, NULL, &pdev->dev); | |
| if (!host->slot_pdev[i]) { | |
| i++; | |
| continue; | |
| } | |
| ret = cvm_mmc_of_slot_probe(&host->slot_pdev[i]->dev, host); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Error populating slots\n"); | |
| octeon_mmc_set_shared_power(host, 0); | |
| goto error; | |
| } | |
| i++; | |
| } | |
| return 0; | |
| error: | |
| for (i = 0; i < CAVIUM_MAX_MMC; i++) { | |
| if (host->slot[i]) | |
| cvm_mmc_of_slot_remove(host->slot[i]); | |
| if (host->slot_pdev[i]) | |
| of_platform_device_destroy(&host->slot_pdev[i]->dev, NULL); | |
| } | |
| return ret; | |
| } | |
| static int octeon_mmc_remove(struct platform_device *pdev) | |
| { | |
| struct cvm_mmc_host *host = platform_get_drvdata(pdev); | |
| u64 dma_cfg; | |
| int i; | |
| for (i = 0; i < CAVIUM_MAX_MMC; i++) | |
| if (host->slot[i]) | |
| cvm_mmc_of_slot_remove(host->slot[i]); | |
| dma_cfg = readq(host->dma_base + MIO_EMM_DMA_CFG(host)); | |
| dma_cfg &= ~MIO_EMM_DMA_CFG_EN; | |
| writeq(dma_cfg, host->dma_base + MIO_EMM_DMA_CFG(host)); | |
| octeon_mmc_set_shared_power(host, 0); | |
| return 0; | |
| } | |
| static const struct of_device_id octeon_mmc_match[] = { | |
| { | |
| .compatible = "cavium,octeon-6130-mmc", | |
| }, | |
| { | |
| .compatible = "cavium,octeon-7890-mmc", | |
| }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, octeon_mmc_match); | |
| static struct platform_driver octeon_mmc_driver = { | |
| .probe = octeon_mmc_probe, | |
| .remove = octeon_mmc_remove, | |
| .driver = { | |
| .name = KBUILD_MODNAME, | |
| .of_match_table = octeon_mmc_match, | |
| }, | |
| }; | |
| module_platform_driver(octeon_mmc_driver); | |
| MODULE_AUTHOR("Cavium Inc. <support@cavium.com>"); | |
| MODULE_DESCRIPTION("Low-level driver for Cavium OCTEON MMC/SSD card"); | |
| MODULE_LICENSE("GPL"); |