| /* | |
| * pata_netcell.c - Netcell PATA driver | |
| * | |
| * (c) 2006 Red Hat | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/delay.h> | |
| #include <linux/device.h> | |
| #include <scsi/scsi_host.h> | |
| #include <linux/libata.h> | |
| #include <linux/ata.h> | |
| #define DRV_NAME "pata_netcell" | |
| #define DRV_VERSION "0.1.7" | |
| /* No PIO or DMA methods needed for this device */ | |
| static unsigned int netcell_read_id(struct ata_device *adev, | |
| struct ata_taskfile *tf, u16 *id) | |
| { | |
| unsigned int err_mask = ata_do_dev_read_id(adev, tf, id); | |
| /* Firmware forgets to mark words 85-87 valid */ | |
| if (err_mask == 0) | |
| id[ATA_ID_CSF_DEFAULT] |= 0x4000; | |
| return err_mask; | |
| } | |
| static struct scsi_host_template netcell_sht = { | |
| ATA_BMDMA_SHT(DRV_NAME), | |
| }; | |
| static struct ata_port_operations netcell_ops = { | |
| .inherits = &ata_bmdma_port_ops, | |
| .cable_detect = ata_cable_80wire, | |
| .read_id = netcell_read_id, | |
| }; | |
| /** | |
| * netcell_init_one - Register Netcell ATA PCI device with kernel services | |
| * @pdev: PCI device to register | |
| * @ent: Entry in netcell_pci_tbl matching with @pdev | |
| * | |
| * Called from kernel PCI layer. | |
| * | |
| * LOCKING: | |
| * Inherited from PCI layer (may sleep). | |
| * | |
| * RETURNS: | |
| * Zero on success, or -ERRNO value. | |
| */ | |
| static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) | |
| { | |
| static const struct ata_port_info info = { | |
| .flags = ATA_FLAG_SLAVE_POSS, | |
| /* Actually we don't really care about these as the | |
| firmware deals with it */ | |
| .pio_mask = ATA_PIO4, | |
| .mwdma_mask = ATA_MWDMA2, | |
| .udma_mask = ATA_UDMA5, /* UDMA 133 */ | |
| .port_ops = &netcell_ops, | |
| }; | |
| const struct ata_port_info *port_info[] = { &info, NULL }; | |
| int rc; | |
| ata_print_version_once(&pdev->dev, DRV_VERSION); | |
| rc = pcim_enable_device(pdev); | |
| if (rc) | |
| return rc; | |
| /* Any chip specific setup/optimisation/messages here */ | |
| ata_pci_bmdma_clear_simplex(pdev); | |
| /* And let the library code do the work */ | |
| return ata_pci_bmdma_init_one(pdev, port_info, &netcell_sht, NULL, 0); | |
| } | |
| static const struct pci_device_id netcell_pci_tbl[] = { | |
| { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), }, | |
| { } /* terminate list */ | |
| }; | |
| static struct pci_driver netcell_pci_driver = { | |
| .name = DRV_NAME, | |
| .id_table = netcell_pci_tbl, | |
| .probe = netcell_init_one, | |
| .remove = ata_pci_remove_one, | |
| #ifdef CONFIG_PM_SLEEP | |
| .suspend = ata_pci_device_suspend, | |
| .resume = ata_pci_device_resume, | |
| #endif | |
| }; | |
| module_pci_driver(netcell_pci_driver); | |
| MODULE_AUTHOR("Alan Cox"); | |
| MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DEVICE_TABLE(pci, netcell_pci_tbl); | |
| MODULE_VERSION(DRV_VERSION); |