| /* | |
| * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip. | |
| * | |
| * Copyright 2007,2008 Freescale Semiconductor Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| /dts-v1/; | |
| / { | |
| model = "pq2fads"; | |
| compatible = "fsl,pq2fads"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| aliases { | |
| ethernet0 = &enet0; | |
| ethernet1 = &enet1; | |
| serial0 = &serial0; | |
| serial1 = &serial1; | |
| pci0 = &pci0; | |
| }; | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| cpu@0 { | |
| device_type = "cpu"; | |
| reg = <0x0>; | |
| d-cache-line-size = <32>; | |
| i-cache-line-size = <32>; | |
| d-cache-size = <16384>; | |
| i-cache-size = <16384>; | |
| timebase-frequency = <0>; | |
| clock-frequency = <0>; | |
| }; | |
| }; | |
| memory { | |
| device_type = "memory"; | |
| reg = <0x0 0x0>; | |
| }; | |
| localbus@f0010100 { | |
| compatible = "fsl,mpc8280-localbus", | |
| "fsl,pq2-localbus"; | |
| #address-cells = <2>; | |
| #size-cells = <1>; | |
| reg = <0xf0010100 0x60>; | |
| ranges = <0x0 0x0 0xff800000 0x800000 | |
| 0x1 0x0 0xf4500000 0x8000 | |
| 0x8 0x0 0xf8200000 0x8000>; | |
| flash@0,0 { | |
| compatible = "jedec-flash"; | |
| reg = <0x0 0x0 0x800000>; | |
| bank-width = <4>; | |
| device-width = <1>; | |
| }; | |
| bcsr@1,0 { | |
| reg = <0x1 0x0 0x20>; | |
| compatible = "fsl,pq2fads-bcsr"; | |
| }; | |
| PCI_PIC: pic@8,0 { | |
| #interrupt-cells = <1>; | |
| interrupt-controller; | |
| reg = <0x8 0x0 0x8>; | |
| compatible = "fsl,pq2ads-pci-pic"; | |
| interrupt-parent = <&PIC>; | |
| interrupts = <24 8>; | |
| }; | |
| }; | |
| pci0: pci@f0010800 { | |
| device_type = "pci"; | |
| reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; | |
| compatible = "fsl,mpc8280-pci", "fsl,pq2-pci"; | |
| #interrupt-cells = <1>; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| clock-frequency = <66000000>; | |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; | |
| interrupt-map = < | |
| /* IDSEL 0x16 */ | |
| 0xb000 0x0 0x0 0x1 &PCI_PIC 0 | |
| 0xb000 0x0 0x0 0x2 &PCI_PIC 1 | |
| 0xb000 0x0 0x0 0x3 &PCI_PIC 2 | |
| 0xb000 0x0 0x0 0x4 &PCI_PIC 3 | |
| /* IDSEL 0x17 */ | |
| 0xb800 0x0 0x0 0x1 &PCI_PIC 4 | |
| 0xb800 0x0 0x0 0x2 &PCI_PIC 5 | |
| 0xb800 0x0 0x0 0x3 &PCI_PIC 6 | |
| 0xb800 0x0 0x0 0x4 &PCI_PIC 7 | |
| /* IDSEL 0x18 */ | |
| 0xc000 0x0 0x0 0x1 &PCI_PIC 8 | |
| 0xc000 0x0 0x0 0x2 &PCI_PIC 9 | |
| 0xc000 0x0 0x0 0x3 &PCI_PIC 10 | |
| 0xc000 0x0 0x0 0x4 &PCI_PIC 11>; | |
| interrupt-parent = <&PIC>; | |
| interrupts = <18 8>; | |
| ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 | |
| 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 | |
| 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>; | |
| }; | |
| soc@f0000000 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| device_type = "soc"; | |
| compatible = "fsl,mpc8280", "fsl,pq2-soc"; | |
| ranges = <0x0 0xf0000000 0x53000>; | |
| // Temporary -- will go away once kernel uses ranges for get_immrbase(). | |
| reg = <0xf0000000 0x53000>; | |
| cpm@119c0 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| #interrupt-cells = <2>; | |
| compatible = "fsl,mpc8280-cpm", "fsl,cpm2"; | |
| reg = <0x119c0 0x30>; | |
| ranges; | |
| muram@0 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges = <0x0 0x0 0x10000>; | |
| data@0 { | |
| compatible = "fsl,cpm-muram-data"; | |
| reg = <0x0 0x2000 0x9800 0x800>; | |
| }; | |
| }; | |
| brg@119f0 { | |
| compatible = "fsl,mpc8280-brg", | |
| "fsl,cpm2-brg", | |
| "fsl,cpm-brg"; | |
| reg = <0x119f0 0x10 0x115f0 0x10>; | |
| }; | |
| serial0: serial@11a00 { | |
| device_type = "serial"; | |
| compatible = "fsl,mpc8280-scc-uart", | |
| "fsl,cpm2-scc-uart"; | |
| reg = <0x11a00 0x20 0x8000 0x100>; | |
| interrupts = <40 8>; | |
| interrupt-parent = <&PIC>; | |
| fsl,cpm-brg = <1>; | |
| fsl,cpm-command = <0x800000>; | |
| }; | |
| serial1: serial@11a20 { | |
| device_type = "serial"; | |
| compatible = "fsl,mpc8280-scc-uart", | |
| "fsl,cpm2-scc-uart"; | |
| reg = <0x11a20 0x20 0x8100 0x100>; | |
| interrupts = <41 8>; | |
| interrupt-parent = <&PIC>; | |
| fsl,cpm-brg = <2>; | |
| fsl,cpm-command = <0x4a00000>; | |
| }; | |
| enet0: ethernet@11320 { | |
| device_type = "network"; | |
| compatible = "fsl,mpc8280-fcc-enet", | |
| "fsl,cpm2-fcc-enet"; | |
| reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; | |
| interrupts = <33 8>; | |
| interrupt-parent = <&PIC>; | |
| phy-handle = <&PHY0>; | |
| linux,network-index = <0>; | |
| fsl,cpm-command = <0x16200300>; | |
| }; | |
| enet1: ethernet@11340 { | |
| device_type = "network"; | |
| compatible = "fsl,mpc8280-fcc-enet", | |
| "fsl,cpm2-fcc-enet"; | |
| reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>; | |
| interrupts = <34 8>; | |
| interrupt-parent = <&PIC>; | |
| phy-handle = <&PHY1>; | |
| linux,network-index = <1>; | |
| fsl,cpm-command = <0x1a400300>; | |
| local-mac-address = [00 e0 0c 00 79 01]; | |
| }; | |
| mdio@10d40 { | |
| compatible = "fsl,pq2fads-mdio-bitbang", | |
| "fsl,mpc8280-mdio-bitbang", | |
| "fsl,cpm2-mdio-bitbang"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x10d40 0x14>; | |
| fsl,mdio-pin = <9>; | |
| fsl,mdc-pin = <10>; | |
| PHY0: ethernet-phy@0 { | |
| interrupt-parent = <&PIC>; | |
| interrupts = <25 2>; | |
| reg = <0x0>; | |
| }; | |
| PHY1: ethernet-phy@1 { | |
| interrupt-parent = <&PIC>; | |
| interrupts = <25 2>; | |
| reg = <0x3>; | |
| }; | |
| }; | |
| usb@11b60 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "fsl,mpc8280-usb", | |
| "fsl,cpm2-usb"; | |
| reg = <0x11b60 0x18 0x8b00 0x100>; | |
| interrupt-parent = <&PIC>; | |
| interrupts = <11 8>; | |
| fsl,cpm-command = <0x2e600000>; | |
| }; | |
| }; | |
| PIC: interrupt-controller@10c00 { | |
| #interrupt-cells = <2>; | |
| interrupt-controller; | |
| reg = <0x10c00 0x80>; | |
| compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic"; | |
| }; | |
| }; | |
| chosen { | |
| linux,stdout-path = "/soc/cpm/serial@11a00"; | |
| }; | |
| }; |