| Renesas Electronics USB3.0 Peripheral driver | |
| Required properties: | |
| - compatible: Must contain one of the following: | |
| - "renesas,r8a7795-usb3-peri" | |
| - "renesas,r8a7796-usb3-peri" | |
| - "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible | |
| device | |
| When compatible with the generic version, nodes must list the | |
| SoC-specific version corresponding to the platform first | |
| followed by the generic version. | |
| - reg: Base address and length of the register for the USB3.0 Peripheral | |
| - interrupts: Interrupt specifier for the USB3.0 Peripheral | |
| - clocks: clock phandle and specifier pair | |
| Example of R-Car H3 ES1.x: | |
| usb3_peri0: usb@ee020000 { | |
| compatible = "renesas,r8a7795-usb3-peri", | |
| "renesas,rcar-gen3-usb3-peri"; | |
| reg = <0 0xee020000 0 0x400>; | |
| interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&cpg CPG_MOD 328>; | |
| }; | |
| usb3_peri1: usb@ee060000 { | |
| compatible = "renesas,r8a7795-usb3-peri", | |
| "renesas,rcar-gen3-usb3-peri"; | |
| reg = <0 0xee060000 0 0x400>; | |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&cpg CPG_MOD 327>; | |
| }; |