# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Ralink MT7620 Pin Controller

maintainers:
  - Arınç ÜNAL <arinc.unal@arinc9.com>
  - Sergio Paracuellos <sergio.paracuellos@gmail.com>

description:
  Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
  The pin controller can only set the muxing of pin groups. Muxing individual
  pins is not supported. There is no pinconf support.

properties:
  compatible:
    const: ralink,mt7620-pinctrl

patternProperties:
  '-pins$':
    type: object
    patternProperties:
      '^(.*-)?pinmux$':
        type: object
        description: node for pinctrl.
        $ref: pinmux-node.yaml#

        properties:
          groups:
            description: The pin group to select.
            enum: [
              # common
              i2c, spi, wdt,

              # For MT7620 SoC
              ephy, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi refclk,
              uartf, uartlite, wled,

              # For MT7628 and MT7688 SoCs
              gpio, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
              p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0,
              pwm1, refclk, sdmode, spi cs1, spis, uart0, uart1, uart2,
              wled_an, wled_kn,
            ]

          function:
            description: The mux function to select.
            enum: [
              # common
              gpio, i2c, refclk, spi,

              # For MT7620 SoC
              ephy, gpio i2s, gpio uartf, i2s uartf, mdio, nand, pa,
              pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf,
              rgmii1, rgmii2, sd, spi refclk, uartf, uartlite, wdt refclk,
              wdt rst, wled,

              # For MT7628 and MT7688 SoCs
              antenna, debug, i2s, jtag, p0led_an, p0led_kn,
              p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn,
              p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2,
              rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi cs1,
              spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -,
            ]

        required:
          - groups
          - function

        additionalProperties: false

    additionalProperties: false

allOf:
  - $ref: "pinctrl.yaml#"

required:
  - compatible

additionalProperties: false

examples:
  # Pinmux controller node
  - |
    pinctrl {
      compatible = "ralink,mt7620-pinctrl";

      i2c_pins: i2c0-pins {
        pinmux {
          groups = "i2c";
          function = "i2c";
        };
      };
    };