# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/mediatek,net.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: MediaTek Frame Engine Ethernet controller

maintainers:
  - Lorenzo Bianconi <lorenzo@kernel.org>
  - Felix Fietkau <nbd@nbd.name>

description:
  The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs
  have dual GMAC ports.

properties:
  compatible:
    enum:
      - mediatek,mt2701-eth
      - mediatek,mt7623-eth
      - mediatek,mt7622-eth
      - mediatek,mt7629-eth
      - mediatek,mt7986-eth
      - ralink,rt5350-eth

  reg:
    maxItems: 1

  clocks: true
  clock-names: true

  interrupts:
    minItems: 3
    maxItems: 4

  power-domains:
    maxItems: 1

  resets:
    maxItems: 3

  reset-names:
    items:
      - const: fe
      - const: gmac
      - const: ppe

  mediatek,ethsys:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      Phandle to the syscon node that handles the port setup.

  cci-control-port: true

  mediatek,hifsys:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      Phandle to the mediatek hifsys controller used to provide various clocks
      and reset to the system.

  mediatek,sgmiisys:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    minItems: 1
    maxItems: 2
    items:
      maxItems: 1
    description:
      A list of phandle to the syscon node that handles the SGMII setup which is required for
      those SoCs equipped with SGMII.

  dma-coherent: true

  mdio-bus:
    $ref: mdio.yaml#
    unevaluatedProperties: false

  "#address-cells":
    const: 1

  "#size-cells":
    const: 0

allOf:
  - $ref: "ethernet-controller.yaml#"
  - if:
      properties:
        compatible:
          contains:
            enum:
              - mediatek,mt2701-eth
              - mediatek,mt7623-eth
    then:
      properties:
        interrupts:
          maxItems: 3

        clocks:
          minItems: 4
          maxItems: 4

        clock-names:
          items:
            - const: ethif
            - const: esw
            - const: gp1
            - const: gp2

        mediatek,pctl:
          $ref: /schemas/types.yaml#/definitions/phandle
          description:
            Phandle to the syscon node that handles the ports slew rate and
            driver current.

  - if:
      properties:
        compatible:
          contains:
            const: mediatek,mt7622-eth
    then:
      properties:
        interrupts:
          maxItems: 3

        clocks:
          minItems: 11
          maxItems: 11

        clock-names:
          items:
            - const: ethif
            - const: esw
            - const: gp0
            - const: gp1
            - const: gp2
            - const: sgmii_tx250m
            - const: sgmii_rx250m
            - const: sgmii_cdr_ref
            - const: sgmii_cdr_fb
            - const: sgmii_ck
            - const: eth2pll

        mediatek,sgmiisys:
          minItems: 1
          maxItems: 1

        mediatek,wed:
          $ref: /schemas/types.yaml#/definitions/phandle-array
          minItems: 2
          maxItems: 2
          items:
            maxItems: 1
          description:
            List of phandles to wireless ethernet dispatch nodes.

        mediatek,pcie-mirror:
          $ref: /schemas/types.yaml#/definitions/phandle
          description:
            Phandle to the mediatek pcie-mirror controller.

  - if:
      properties:
        compatible:
          contains:
            const: mediatek,mt7629-eth
    then:
      properties:
        interrupts:
          maxItems: 3

        clocks:
          minItems: 17
          maxItems: 17

        clock-names:
          items:
            - const: ethif
            - const: sgmiitop
            - const: esw
            - const: gp0
            - const: gp1
            - const: gp2
            - const: fe
            - const: sgmii_tx250m
            - const: sgmii_rx250m
            - const: sgmii_cdr_ref
            - const: sgmii_cdr_fb
            - const: sgmii2_tx250m
            - const: sgmii2_rx250m
            - const: sgmii2_cdr_ref
            - const: sgmii2_cdr_fb
            - const: sgmii_ck
            - const: eth2pll

        mediatek,infracfg:
          $ref: /schemas/types.yaml#/definitions/phandle
          description:
            Phandle to the syscon node that handles the path from GMAC to
            PHY variants.

        mediatek,sgmiisys:
          minItems: 2
          maxItems: 2

  - if:
      properties:
        compatible:
          contains:
            const: mediatek,mt7986-eth
    then:
      properties:
        interrupts:
          minItems: 4

        clocks:
          minItems: 15
          maxItems: 15

        clock-names:
          items:
            - const: fe
            - const: gp2
            - const: gp1
            - const: wocpu1
            - const: wocpu0
            - const: sgmii_tx250m
            - const: sgmii_rx250m
            - const: sgmii_cdr_ref
            - const: sgmii_cdr_fb
            - const: sgmii2_tx250m
            - const: sgmii2_rx250m
            - const: sgmii2_cdr_ref
            - const: sgmii2_cdr_fb
            - const: netsys0
            - const: netsys1

        mediatek,sgmiisys:
          minItems: 2
          maxItems: 2

patternProperties:
  "^mac@[0-1]$":
    type: object
    additionalProperties: false
    allOf:
      - $ref: ethernet-controller.yaml#
    description:
      Ethernet MAC node
    properties:
      compatible:
        const: mediatek,eth-mac

      reg:
        maxItems: 1

      phy-handle: true

      phy-mode: true

    required:
      - reg
      - compatible
      - phy-handle

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names
  - mediatek,ethsys

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/clock/mt7622-clk.h>
    #include <dt-bindings/power/mt7622-power.h>

    soc {
      #address-cells = <2>;
      #size-cells = <2>;

      ethernet: ethernet@1b100000 {
        compatible = "mediatek,mt7622-eth";
        reg = <0 0x1b100000 0 0x20000>;
        interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
                     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
                     <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
        clocks = <&topckgen CLK_TOP_ETH_SEL>,
                 <&ethsys CLK_ETH_ESW_EN>,
                 <&ethsys CLK_ETH_GP0_EN>,
                 <&ethsys CLK_ETH_GP1_EN>,
                 <&ethsys CLK_ETH_GP2_EN>,
                 <&sgmiisys CLK_SGMII_TX250M_EN>,
                 <&sgmiisys CLK_SGMII_RX250M_EN>,
                 <&sgmiisys CLK_SGMII_CDR_REF>,
                 <&sgmiisys CLK_SGMII_CDR_FB>,
                 <&topckgen CLK_TOP_SGMIIPLL>,
                 <&apmixedsys CLK_APMIXED_ETH2PLL>;
        clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
                      "sgmii_tx250m", "sgmii_rx250m",
                      "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
                      "eth2pll";
        power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
        mediatek,ethsys = <&ethsys>;
        mediatek,sgmiisys = <&sgmiisys>;
        cci-control-port = <&cci_control2>;
        mediatek,pcie-mirror = <&pcie_mirror>;
        mediatek,hifsys = <&hifsys>;
        dma-coherent;

        #address-cells = <1>;
        #size-cells = <0>;

        mdio0: mdio-bus {
          #address-cells = <1>;
          #size-cells = <0>;

          phy0: ethernet-phy@0 {
            reg = <0>;
          };

          phy1: ethernet-phy@1 {
            reg = <1>;
          };
        };

        gmac0: mac@0 {
          compatible = "mediatek,eth-mac";
          phy-mode = "rgmii";
          phy-handle = <&phy0>;
          reg = <0>;
        };

        gmac1: mac@1 {
          compatible = "mediatek,eth-mac";
          phy-mode = "rgmii";
          phy-handle = <&phy1>;
          reg = <1>;
        };
      };
    };

  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/clock/mt7622-clk.h>

    soc {
      #address-cells = <2>;
      #size-cells = <2>;

      eth: ethernet@15100000 {
        #define CLK_ETH_FE_EN               0
        #define CLK_ETH_WOCPU1_EN           3
        #define CLK_ETH_WOCPU0_EN           4
        #define CLK_TOP_NETSYS_SEL          43
        #define CLK_TOP_NETSYS_500M_SEL     44
        #define CLK_TOP_NETSYS_2X_SEL       46
        #define CLK_TOP_SGM_325M_SEL        47
        #define CLK_APMIXED_NET2PLL         1
        #define CLK_APMIXED_SGMPLL          3

        compatible = "mediatek,mt7986-eth";
        reg = <0 0x15100000 0 0x80000>;
        interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&ethsys CLK_ETH_FE_EN>,
                 <&ethsys CLK_ETH_GP2_EN>,
                 <&ethsys CLK_ETH_GP1_EN>,
                 <&ethsys CLK_ETH_WOCPU1_EN>,
                 <&ethsys CLK_ETH_WOCPU0_EN>,
                 <&sgmiisys0 CLK_SGMII_TX250M_EN>,
                 <&sgmiisys0 CLK_SGMII_RX250M_EN>,
                 <&sgmiisys0 CLK_SGMII_CDR_REF>,
                 <&sgmiisys0 CLK_SGMII_CDR_FB>,
                 <&sgmiisys1 CLK_SGMII_TX250M_EN>,
                 <&sgmiisys1 CLK_SGMII_RX250M_EN>,
                 <&sgmiisys1 CLK_SGMII_CDR_REF>,
                 <&sgmiisys1 CLK_SGMII_CDR_FB>,
                 <&topckgen CLK_TOP_NETSYS_SEL>,
                 <&topckgen CLK_TOP_NETSYS_SEL>;
        clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0",
                      "sgmii_tx250m", "sgmii_rx250m",
                      "sgmii_cdr_ref", "sgmii_cdr_fb",
                      "sgmii2_tx250m", "sgmii2_rx250m",
                      "sgmii2_cdr_ref", "sgmii2_cdr_fb",
                      "netsys0", "netsys1";
        mediatek,ethsys = <&ethsys>;
        mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
        assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
                          <&topckgen CLK_TOP_SGM_325M_SEL>;
        assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
                                 <&apmixedsys CLK_APMIXED_SGMPLL>;

        #address-cells = <1>;
        #size-cells = <0>;

        mdio: mdio-bus {
          #address-cells = <1>;
          #size-cells = <0>;

          phy5: ethernet-phy@0 {
            compatible = "ethernet-phy-id67c9.de0a";
            phy-mode = "2500base-x";
            reset-gpios = <&pio 6 1>;
            reset-deassert-us = <20000>;
            reg = <5>;
          };

          phy6: ethernet-phy@1 {
            compatible = "ethernet-phy-id67c9.de0a";
            phy-mode = "2500base-x";
            reg = <6>;
          };
        };

        mac0: mac@0 {
          compatible = "mediatek,eth-mac";
          phy-mode = "2500base-x";
          phy-handle = <&phy5>;
          reg = <0>;
        };

        mac1: mac@1 {
          compatible = "mediatek,eth-mac";
          phy-mode = "2500base-x";
          phy-handle = <&phy6>;
          reg = <1>;
        };
      };
    };