// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Universal Flash Storage Host controller Platform bus based glue driver
 * Copyright (C) 2011-2013 Samsung India Software Operations
 *
 * Authors:
 *	Santosh Yaraganavi <santosh.sy@samsung.com>
 *	Vinayak Holikatti <h.vinayak@samsung.com>
 */

#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>

#include <ufs/ufshcd.h>
#include "ufshcd-pltfrm.h"
#include <ufs/unipro.h>

#define UFSHCD_DEFAULT_LANES_PER_DIRECTION		2

static int ufshcd_parse_clock_info(struct ufs_hba *hba)
{
	int ret = 0;
	int cnt;
	int i;
	struct device *dev = hba->dev;
	struct device_node *np = dev->of_node;
	const char *name;
	u32 *clkfreq = NULL;
	struct ufs_clk_info *clki;
	int len = 0;
	size_t sz = 0;

	if (!np)
		goto out;

	cnt = of_property_count_strings(np, "clock-names");
	if (!cnt || (cnt == -EINVAL)) {
		dev_info(dev, "%s: Unable to find clocks, assuming enabled\n",
				__func__);
	} else if (cnt < 0) {
		dev_err(dev, "%s: count clock strings failed, err %d\n",
				__func__, cnt);
		ret = cnt;
	}

	if (cnt <= 0)
		goto out;

	if (!of_get_property(np, "freq-table-hz", &len)) {
		dev_info(dev, "freq-table-hz property not specified\n");
		goto out;
	}

	if (len <= 0)
		goto out;

	sz = len / sizeof(*clkfreq);
	if (sz != 2 * cnt) {
		dev_err(dev, "%s len mismatch\n", "freq-table-hz");
		ret = -EINVAL;
		goto out;
	}

	clkfreq = devm_kcalloc(dev, sz, sizeof(*clkfreq),
			       GFP_KERNEL);
	if (!clkfreq) {
		ret = -ENOMEM;
		goto out;
	}

	ret = of_property_read_u32_array(np, "freq-table-hz",
			clkfreq, sz);
	if (ret && (ret != -EINVAL)) {
		dev_err(dev, "%s: error reading array %d\n",
				"freq-table-hz", ret);
		return ret;
	}

	for (i = 0; i < sz; i += 2) {
		ret = of_property_read_string_index(np,	"clock-names", i/2,
						    &name);
		if (ret)
			goto out;

		clki = devm_kzalloc(dev, sizeof(*clki), GFP_KERNEL);
		if (!clki) {
			ret = -ENOMEM;
			goto out;
		}

		clki->min_freq = clkfreq[i];
		clki->max_freq = clkfreq[i+1];
		clki->name = devm_kstrdup(dev, name, GFP_KERNEL);
		if (!clki->name) {
			ret = -ENOMEM;
			goto out;
		}

		if (!strcmp(name, "ref_clk"))
			clki->keep_link_active = true;
		dev_dbg(dev, "%s: min %u max %u name %s\n", "freq-table-hz",
				clki->min_freq, clki->max_freq, clki->name);
		list_add_tail(&clki->list, &hba->clk_list_head);
	}
out:
	return ret;
}

static bool phandle_exists(const struct device_node *np,
			   const char *phandle_name, int index)
{
	struct device_node *parse_np = of_parse_phandle(np, phandle_name, index);

	if (parse_np)
		of_node_put(parse_np);

	return parse_np != NULL;
}

#define MAX_PROP_SIZE 32
int ufshcd_populate_vreg(struct device *dev, const char *name,
			 struct ufs_vreg **out_vreg)
{
	char prop_name[MAX_PROP_SIZE];
	struct ufs_vreg *vreg = NULL;
	struct device_node *np = dev->of_node;

	if (!np) {
		dev_err(dev, "%s: non DT initialization\n", __func__);
		goto out;
	}

	snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", name);
	if (!phandle_exists(np, prop_name, 0)) {
		dev_info(dev, "%s: Unable to find %s regulator, assuming enabled\n",
				__func__, prop_name);
		goto out;
	}

	vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
	if (!vreg)
		return -ENOMEM;

	vreg->name = devm_kstrdup(dev, name, GFP_KERNEL);
	if (!vreg->name)
		return -ENOMEM;

	snprintf(prop_name, MAX_PROP_SIZE, "%s-max-microamp", name);
	if (of_property_read_u32(np, prop_name, &vreg->max_uA)) {
		dev_info(dev, "%s: unable to find %s\n", __func__, prop_name);
		vreg->max_uA = 0;
	}
out:
	*out_vreg = vreg;
	return 0;
}
EXPORT_SYMBOL_GPL(ufshcd_populate_vreg);

/**
 * ufshcd_parse_regulator_info - get regulator info from device tree
 * @hba: per adapter instance
 *
 * Get regulator info from device tree for vcc, vccq, vccq2 power supplies.
 * If any of the supplies are not defined it is assumed that they are always-on
 * and hence return zero. If the property is defined but parsing is failed
 * then return corresponding error.
 */
static int ufshcd_parse_regulator_info(struct ufs_hba *hba)
{
	int err;
	struct device *dev = hba->dev;
	struct ufs_vreg_info *info = &hba->vreg_info;

	err = ufshcd_populate_vreg(dev, "vdd-hba", &info->vdd_hba);
	if (err)
		goto out;

	err = ufshcd_populate_vreg(dev, "vcc", &info->vcc);
	if (err)
		goto out;

	err = ufshcd_populate_vreg(dev, "vccq", &info->vccq);
	if (err)
		goto out;

	err = ufshcd_populate_vreg(dev, "vccq2", &info->vccq2);
out:
	return err;
}

void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
{
	ufshcd_shutdown((struct ufs_hba *)platform_get_drvdata(pdev));
}
EXPORT_SYMBOL_GPL(ufshcd_pltfrm_shutdown);

static void ufshcd_init_lanes_per_dir(struct ufs_hba *hba)
{
	struct device *dev = hba->dev;
	int ret;

	ret = of_property_read_u32(dev->of_node, "lanes-per-direction",
		&hba->lanes_per_direction);
	if (ret) {
		dev_dbg(hba->dev,
			"%s: failed to read lanes-per-direction, ret=%d\n",
			__func__, ret);
		hba->lanes_per_direction = UFSHCD_DEFAULT_LANES_PER_DIRECTION;
	}
}

/**
 * ufshcd_get_pwr_dev_param - get finally agreed attributes for
 *                            power mode change
 * @pltfrm_param: pointer to platform parameters
 * @dev_max: pointer to device attributes
 * @agreed_pwr: returned agreed attributes
 *
 * Returns 0 on success, non-zero value on failure
 */
int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param,
			     const struct ufs_pa_layer_attr *dev_max,
			     struct ufs_pa_layer_attr *agreed_pwr)
{
	int min_pltfrm_gear;
	int min_dev_gear;
	bool is_dev_sup_hs = false;
	bool is_pltfrm_max_hs = false;

	if (dev_max->pwr_rx == FAST_MODE)
		is_dev_sup_hs = true;

	if (pltfrm_param->desired_working_mode == UFS_HS_MODE) {
		is_pltfrm_max_hs = true;
		min_pltfrm_gear = min_t(u32, pltfrm_param->hs_rx_gear,
					pltfrm_param->hs_tx_gear);
	} else {
		min_pltfrm_gear = min_t(u32, pltfrm_param->pwm_rx_gear,
					pltfrm_param->pwm_tx_gear);
	}

	/*
	 * device doesn't support HS but
	 * pltfrm_param->desired_working_mode is HS,
	 * thus device and pltfrm_param don't agree
	 */
	if (!is_dev_sup_hs && is_pltfrm_max_hs) {
		pr_info("%s: device doesn't support HS\n",
			__func__);
		return -ENOTSUPP;
	} else if (is_dev_sup_hs && is_pltfrm_max_hs) {
		/*
		 * since device supports HS, it supports FAST_MODE.
		 * since pltfrm_param->desired_working_mode is also HS
		 * then final decision (FAST/FASTAUTO) is done according
		 * to pltfrm_params as it is the restricting factor
		 */
		agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_hs;
		agreed_pwr->pwr_tx = agreed_pwr->pwr_rx;
	} else {
		/*
		 * here pltfrm_param->desired_working_mode is PWM.
		 * it doesn't matter whether device supports HS or PWM,
		 * in both cases pltfrm_param->desired_working_mode will
		 * determine the mode
		 */
		agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_pwm;
		agreed_pwr->pwr_tx = agreed_pwr->pwr_rx;
	}

	/*
	 * we would like tx to work in the minimum number of lanes
	 * between device capability and vendor preferences.
	 * the same decision will be made for rx
	 */
	agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx,
				    pltfrm_param->tx_lanes);
	agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx,
				    pltfrm_param->rx_lanes);

	/* device maximum gear is the minimum between device rx and tx gears */
	min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);

	/*
	 * if both device capabilities and vendor pre-defined preferences are
	 * both HS or both PWM then set the minimum gear to be the chosen
	 * working gear.
	 * if one is PWM and one is HS then the one that is PWM get to decide
	 * what is the gear, as it is the one that also decided previously what
	 * pwr the device will be configured to.
	 */
	if ((is_dev_sup_hs && is_pltfrm_max_hs) ||
	    (!is_dev_sup_hs && !is_pltfrm_max_hs)) {
		agreed_pwr->gear_rx =
			min_t(u32, min_dev_gear, min_pltfrm_gear);
	} else if (!is_dev_sup_hs) {
		agreed_pwr->gear_rx = min_dev_gear;
	} else {
		agreed_pwr->gear_rx = min_pltfrm_gear;
	}
	agreed_pwr->gear_tx = agreed_pwr->gear_rx;

	agreed_pwr->hs_rate = pltfrm_param->hs_rate;

	return 0;
}
EXPORT_SYMBOL_GPL(ufshcd_get_pwr_dev_param);

void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param)
{
	*dev_param = (struct ufs_dev_params){
		.tx_lanes = 2,
		.rx_lanes = 2,
		.hs_rx_gear = UFS_HS_G3,
		.hs_tx_gear = UFS_HS_G3,
		.pwm_rx_gear = UFS_PWM_G4,
		.pwm_tx_gear = UFS_PWM_G4,
		.rx_pwr_pwm = SLOW_MODE,
		.tx_pwr_pwm = SLOW_MODE,
		.rx_pwr_hs = FAST_MODE,
		.tx_pwr_hs = FAST_MODE,
		.hs_rate = PA_HS_MODE_B,
		.desired_working_mode = UFS_HS_MODE,
	};
}
EXPORT_SYMBOL_GPL(ufshcd_init_pwr_dev_param);

/**
 * ufshcd_pltfrm_init - probe routine of the driver
 * @pdev: pointer to Platform device handle
 * @vops: pointer to variant ops
 *
 * Returns 0 on success, non-zero value on failure
 */
int ufshcd_pltfrm_init(struct platform_device *pdev,
		       const struct ufs_hba_variant_ops *vops)
{
	struct ufs_hba *hba;
	void __iomem *mmio_base;
	int irq, err;
	struct device *dev = &pdev->dev;

	mmio_base = devm_platform_ioremap_resource(pdev, 0);
	if (IS_ERR(mmio_base)) {
		err = PTR_ERR(mmio_base);
		goto out;
	}

	irq = platform_get_irq(pdev, 0);
	if (irq < 0) {
		err = irq;
		goto out;
	}

	err = ufshcd_alloc_host(dev, &hba);
	if (err) {
		dev_err(dev, "Allocation failed\n");
		goto out;
	}

	hba->vops = vops;

	err = ufshcd_parse_clock_info(hba);
	if (err) {
		dev_err(dev, "%s: clock parse failed %d\n",
				__func__, err);
		goto dealloc_host;
	}
	err = ufshcd_parse_regulator_info(hba);
	if (err) {
		dev_err(dev, "%s: regulator init failed %d\n",
				__func__, err);
		goto dealloc_host;
	}

	ufshcd_init_lanes_per_dir(hba);

	err = ufshcd_init(hba, mmio_base, irq);
	if (err) {
		dev_err(dev, "Initialization failed\n");
		goto dealloc_host;
	}

	pm_runtime_set_active(dev);
	pm_runtime_enable(dev);

	return 0;

dealloc_host:
	ufshcd_dealloc_host(hba);
out:
	return err;
}
EXPORT_SYMBOL_GPL(ufshcd_pltfrm_init);

MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
MODULE_DESCRIPTION("UFS host controller Platform bus based glue driver");
MODULE_LICENSE("GPL");