| // SPDX-License-Identifier: GPL-2.0-only |
| |
| #include <linux/array_size.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/property.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <video/mipi_display.h> |
| |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| #include <drm/drm_probe_helper.h> |
| |
| struct samsung_ltl106hl02 { |
| struct drm_panel panel; |
| struct mipi_dsi_device *dsi; |
| |
| struct regulator *supply; |
| struct gpio_desc *reset_gpio; |
| }; |
| |
| static inline struct samsung_ltl106hl02 *to_samsung_ltl106hl02(struct drm_panel *panel) |
| { |
| return container_of(panel, struct samsung_ltl106hl02, panel); |
| } |
| |
| static void samsung_ltl106hl02_reset(struct samsung_ltl106hl02 *ctx) |
| { |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); |
| usleep_range(10000, 11000); |
| gpiod_set_value_cansleep(ctx->reset_gpio, 0); |
| usleep_range(2000, 3000); |
| } |
| |
| static int samsung_ltl106hl02_prepare(struct drm_panel *panel) |
| { |
| struct samsung_ltl106hl02 *ctx = to_samsung_ltl106hl02(panel); |
| struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi }; |
| struct device *dev = &ctx->dsi->dev; |
| int ret; |
| |
| ret = regulator_enable(ctx->supply); |
| if (ret < 0) { |
| dev_err(dev, "failed to enable power supply %d\n", ret); |
| return ret; |
| } |
| |
| if (ctx->reset_gpio) |
| samsung_ltl106hl02_reset(ctx); |
| |
| mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx); |
| mipi_dsi_msleep(&dsi_ctx, 70); |
| |
| mipi_dsi_dcs_set_display_on_multi(&dsi_ctx); |
| mipi_dsi_msleep(&dsi_ctx, 5); |
| |
| return dsi_ctx.accum_err; |
| } |
| |
| static int samsung_ltl106hl02_unprepare(struct drm_panel *panel) |
| { |
| struct samsung_ltl106hl02 *ctx = to_samsung_ltl106hl02(panel); |
| struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi }; |
| |
| mipi_dsi_dcs_set_display_off_multi(&dsi_ctx); |
| mipi_dsi_msleep(&dsi_ctx, 50); |
| mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx); |
| mipi_dsi_msleep(&dsi_ctx, 150); |
| |
| if (ctx->reset_gpio) |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); |
| |
| regulator_disable(ctx->supply); |
| |
| return 0; |
| } |
| |
| static const struct drm_display_mode samsung_ltl106hl02_mode = { |
| .clock = (1920 + 32 + 32 + 64) * (1080 + 6 + 3 + 22) * 60 / 1000, |
| .hdisplay = 1920, |
| .hsync_start = 1920 + 32, |
| .hsync_end = 1920 + 32 + 32, |
| .htotal = 1920 + 32 + 32 + 64, |
| .vdisplay = 1080, |
| .vsync_start = 1080 + 6, |
| .vsync_end = 1080 + 6 + 3, |
| .vtotal = 1080 + 6 + 3 + 22, |
| .width_mm = 235, |
| .height_mm = 132, |
| .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, |
| }; |
| |
| static int samsung_ltl106hl02_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| return drm_connector_helper_get_modes_fixed(connector, &samsung_ltl106hl02_mode); |
| } |
| |
| static const struct drm_panel_funcs samsung_ltl106hl02_panel_funcs = { |
| .prepare = samsung_ltl106hl02_prepare, |
| .unprepare = samsung_ltl106hl02_unprepare, |
| .get_modes = samsung_ltl106hl02_get_modes, |
| }; |
| |
| static int samsung_ltl106hl02_probe(struct mipi_dsi_device *dsi) |
| { |
| struct device *dev = &dsi->dev; |
| struct samsung_ltl106hl02 *ctx; |
| int ret; |
| |
| ctx = devm_drm_panel_alloc(dev, struct samsung_ltl106hl02, panel, |
| &samsung_ltl106hl02_panel_funcs, |
| DRM_MODE_CONNECTOR_DSI); |
| if (IS_ERR(ctx)) |
| return PTR_ERR(ctx); |
| |
| ctx->supply = devm_regulator_get(dev, "power"); |
| if (IS_ERR(ctx->supply)) |
| return dev_err_probe(dev, PTR_ERR(ctx->supply), |
| "Failed to get power regulator\n"); |
| |
| ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); |
| if (IS_ERR(ctx->reset_gpio)) |
| return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), |
| "Failed to get reset-gpios\n"); |
| |
| ctx->dsi = dsi; |
| mipi_dsi_set_drvdata(dsi, ctx); |
| |
| dsi->lanes = 4; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM; |
| |
| ret = drm_panel_of_backlight(&ctx->panel); |
| if (ret) |
| return dev_err_probe(dev, ret, "Failed to get backlight\n"); |
| |
| drm_panel_add(&ctx->panel); |
| |
| ret = devm_mipi_dsi_attach(dev, dsi); |
| if (ret < 0) { |
| drm_panel_remove(&ctx->panel); |
| return dev_err_probe(dev, ret, "Failed to attach to DSI host\n"); |
| } |
| |
| return 0; |
| } |
| |
| static void samsung_ltl106hl02_remove(struct mipi_dsi_device *dsi) |
| { |
| struct samsung_ltl106hl02 *ctx = mipi_dsi_get_drvdata(dsi); |
| |
| drm_panel_remove(&ctx->panel); |
| } |
| |
| static const struct of_device_id samsung_ltl106hl02_of_match[] = { |
| { .compatible = "samsung,ltl106hl02-001" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, samsung_ltl106hl02_of_match); |
| |
| static struct mipi_dsi_driver samsung_ltl106hl02_driver = { |
| .driver = { |
| .name = "panel-samsung-ltl106hl02", |
| .of_match_table = samsung_ltl106hl02_of_match, |
| }, |
| .probe = samsung_ltl106hl02_probe, |
| .remove = samsung_ltl106hl02_remove, |
| }; |
| module_mipi_dsi_driver(samsung_ltl106hl02_driver); |
| |
| MODULE_AUTHOR("Anton Bambura <jenneron@protonmail.com>"); |
| MODULE_DESCRIPTION("DRM driver for Samsung LTL106HL02 video mode DSI panel"); |
| MODULE_LICENSE("GPL"); |