| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree. |
| * Copyright (c) 2024 Luca Weiss <luca.weiss@fairphone.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/types.h> |
| |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| #include <drm/drm_probe_helper.h> |
| |
| /* Manufacturer specific DSI commands */ |
| #define EK79007AD3_GAMMA1 0x80 |
| #define EK79007AD3_GAMMA2 0x81 |
| #define EK79007AD3_GAMMA3 0x82 |
| #define EK79007AD3_GAMMA4 0x83 |
| #define EK79007AD3_GAMMA5 0x84 |
| #define EK79007AD3_GAMMA6 0x85 |
| #define EK79007AD3_GAMMA7 0x86 |
| #define EK79007AD3_PANEL_CTRL3 0xB2 |
| |
| struct m9189_panel { |
| struct drm_panel panel; |
| struct mipi_dsi_device *dsi; |
| struct regulator *supply; |
| struct gpio_desc *reset_gpio; |
| struct gpio_desc *standby_gpio; |
| }; |
| |
| static inline struct m9189_panel *to_m9189_panel(struct drm_panel *panel) |
| { |
| return container_of(panel, struct m9189_panel, panel); |
| } |
| |
| static void m9189_reset(struct m9189_panel *m9189) |
| { |
| gpiod_set_value_cansleep(m9189->reset_gpio, 0); |
| msleep(20); |
| gpiod_set_value_cansleep(m9189->reset_gpio, 1); |
| msleep(30); |
| gpiod_set_value_cansleep(m9189->reset_gpio, 0); |
| msleep(55); |
| } |
| |
| static int m9189_on(struct m9189_panel *m9189) |
| { |
| struct mipi_dsi_multi_context ctx = { .dsi = m9189->dsi }; |
| |
| ctx.dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| |
| /* Gamma 2.2 */ |
| mipi_dsi_dcs_write_seq_multi(&ctx, EK79007AD3_GAMMA1, 0x48); |
| mipi_dsi_dcs_write_seq_multi(&ctx, EK79007AD3_GAMMA2, 0xB8); |
| mipi_dsi_dcs_write_seq_multi(&ctx, EK79007AD3_GAMMA3, 0x88); |
| mipi_dsi_dcs_write_seq_multi(&ctx, EK79007AD3_GAMMA4, 0x88); |
| mipi_dsi_dcs_write_seq_multi(&ctx, EK79007AD3_GAMMA5, 0x58); |
| mipi_dsi_dcs_write_seq_multi(&ctx, EK79007AD3_GAMMA6, 0xD2); |
| mipi_dsi_dcs_write_seq_multi(&ctx, EK79007AD3_GAMMA7, 0x88); |
| mipi_dsi_msleep(&ctx, 50); |
| |
| /* 4 Lanes */ |
| mipi_dsi_generic_write_multi(&ctx, (u8[]){ EK79007AD3_PANEL_CTRL3, 0x70 }, 2); |
| |
| mipi_dsi_dcs_exit_sleep_mode_multi(&ctx); |
| mipi_dsi_msleep(&ctx, 120); |
| |
| mipi_dsi_dcs_set_display_on_multi(&ctx); |
| mipi_dsi_msleep(&ctx, 120); |
| |
| return ctx.accum_err; |
| } |
| |
| static int m9189_disable(struct drm_panel *panel) |
| { |
| struct m9189_panel *m9189 = to_m9189_panel(panel); |
| struct mipi_dsi_multi_context ctx = { .dsi = m9189->dsi }; |
| |
| ctx.dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| |
| mipi_dsi_dcs_enter_sleep_mode_multi(&ctx); |
| mipi_dsi_msleep(&ctx, 120); |
| |
| gpiod_set_value_cansleep(m9189->standby_gpio, 1); |
| |
| return ctx.accum_err; |
| } |
| |
| static int m9189_prepare(struct drm_panel *panel) |
| { |
| struct m9189_panel *m9189 = to_m9189_panel(panel); |
| struct device *dev = &m9189->dsi->dev; |
| int ret; |
| |
| ret = regulator_enable(m9189->supply); |
| if (ret < 0) { |
| dev_err(dev, "Failed to enable regulators: %d\n", ret); |
| return ret; |
| } |
| |
| gpiod_set_value_cansleep(m9189->standby_gpio, 0); |
| msleep(20); |
| m9189_reset(m9189); |
| |
| ret = m9189_on(m9189); |
| if (ret < 0) { |
| dev_err(dev, "Failed to initialize panel: %d\n", ret); |
| gpiod_set_value_cansleep(m9189->reset_gpio, 1); |
| regulator_disable(m9189->supply); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int m9189_unprepare(struct drm_panel *panel) |
| { |
| struct m9189_panel *m9189 = to_m9189_panel(panel); |
| |
| gpiod_set_value_cansleep(m9189->standby_gpio, 1); |
| msleep(50); |
| |
| gpiod_set_value_cansleep(m9189->reset_gpio, 1); |
| regulator_disable(m9189->supply); |
| |
| return 0; |
| } |
| |
| static const struct drm_display_mode m9189_mode = { |
| .clock = (1024 + 160 + 160 + 10) * (600 + 12 + 23 + 1) * 60 / 1000, |
| .hdisplay = 1024, |
| .hsync_start = 1024 + 160, |
| .hsync_end = 1024 + 160 + 160, |
| .htotal = 1024 + 160 + 160 + 10, |
| .vdisplay = 600, |
| .vsync_start = 600 + 12, |
| .vsync_end = 600 + 12 + 23, |
| .vtotal = 600 + 12 + 23 + 1, |
| .width_mm = 154, |
| .height_mm = 86, |
| }; |
| |
| static int m9189_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| return drm_connector_helper_get_modes_fixed(connector, &m9189_mode); |
| } |
| |
| static const struct drm_panel_funcs m9189_panel_funcs = { |
| .prepare = m9189_prepare, |
| .unprepare = m9189_unprepare, |
| .disable = m9189_disable, |
| .get_modes = m9189_get_modes, |
| }; |
| |
| static int lxd_m9189_probe(struct mipi_dsi_device *dsi) |
| { |
| struct device *dev = &dsi->dev; |
| struct m9189_panel *m9189; |
| int ret; |
| |
| m9189 = devm_kzalloc(dev, sizeof(*m9189), GFP_KERNEL); |
| if (!m9189) |
| return -ENOMEM; |
| |
| m9189->supply = devm_regulator_get(dev, "power"); |
| if (IS_ERR(m9189->supply)) |
| return dev_err_probe(dev, PTR_ERR(m9189->supply), |
| "Failed to get power-supply\n"); |
| |
| m9189->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); |
| if (IS_ERR(m9189->reset_gpio)) |
| return dev_err_probe(dev, PTR_ERR(m9189->reset_gpio), |
| "Failed to get reset-gpios\n"); |
| |
| m9189->standby_gpio = devm_gpiod_get(dev, "standby", GPIOD_OUT_LOW); |
| if (IS_ERR(m9189->standby_gpio)) |
| return dev_err_probe(dev, PTR_ERR(m9189->standby_gpio), |
| "Failed to get standby-gpios\n"); |
| |
| m9189->dsi = dsi; |
| mipi_dsi_set_drvdata(dsi, m9189); |
| |
| dsi->lanes = 4; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST; |
| |
| drm_panel_init(&m9189->panel, dev, &m9189_panel_funcs, |
| DRM_MODE_CONNECTOR_DSI); |
| m9189->panel.prepare_prev_first = true; |
| |
| ret = drm_panel_of_backlight(&m9189->panel); |
| if (ret) |
| return dev_err_probe(dev, ret, "Failed to get backlight\n"); |
| |
| drm_panel_add(&m9189->panel); |
| |
| ret = mipi_dsi_attach(dsi); |
| if (ret < 0) { |
| dev_err_probe(dev, ret, "Failed to attach to DSI host\n"); |
| drm_panel_remove(&m9189->panel); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void lxd_m9189_remove(struct mipi_dsi_device *dsi) |
| { |
| struct m9189_panel *m9189 = mipi_dsi_get_drvdata(dsi); |
| int ret; |
| |
| ret = mipi_dsi_detach(dsi); |
| if (ret < 0) |
| dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); |
| |
| drm_panel_remove(&m9189->panel); |
| } |
| |
| static const struct of_device_id lxd_m9189_of_match[] = { |
| { .compatible = "lxd,m9189a" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, lxd_m9189_of_match); |
| |
| static struct mipi_dsi_driver lxd_m9189_driver = { |
| .probe = lxd_m9189_probe, |
| .remove = lxd_m9189_remove, |
| .driver = { |
| .name = "panel-lxd-m9189a", |
| .of_match_table = lxd_m9189_of_match, |
| }, |
| }; |
| module_mipi_dsi_driver(lxd_m9189_driver); |
| |
| MODULE_DESCRIPTION("DRM driver for LXD M9189A MIPI-DSI panels"); |
| MODULE_LICENSE("GPL"); |