// SPDX-License-Identifier: GPL-2.0-only
/*
 * AL3320A - Dyna Image Ambient Light Sensor
 *
 * Copyright (c) 2014, Intel Corporation.
 *
 * IIO driver for AL3320A (7-bit I2C slave address 0x1C).
 *
 * TODO: interrupt support, thresholds
 * When the driver will get support for interrupt handling, then interrupt
 * will need to be disabled before turning sensor OFF in order to avoid
 * potential races with the interrupt handling.
 */

#include <linux/bitfield.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/mod_devicetable.h>

#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>

#define AL3320A_REG_CONFIG		0x00
#define AL3320A_REG_STATUS		0x01
#define AL3320A_REG_INT			0x02
#define AL3320A_REG_WAIT		0x06
#define AL3320A_REG_CONFIG_RANGE	0x07
#define AL3320A_REG_PERSIST		0x08
#define AL3320A_REG_MEAN_TIME		0x09
#define AL3320A_REG_ADUMMY		0x0A
#define AL3320A_REG_DATA_LOW		0x22

#define AL3320A_REG_LOW_THRESH_LOW	0x30
#define AL3320A_REG_LOW_THRESH_HIGH	0x31
#define AL3320A_REG_HIGH_THRESH_LOW	0x32
#define AL3320A_REG_HIGH_THRESH_HIGH	0x33

#define AL3320A_CONFIG_DISABLE		0x00
#define AL3320A_CONFIG_ENABLE		0x01

#define AL3320A_GAIN_MASK		GENMASK(2, 1)

/* chip params default values */
#define AL3320A_DEFAULT_MEAN_TIME	4
#define AL3320A_DEFAULT_WAIT_TIME	0 /* no waiting */

#define AL3320A_SCALE_AVAILABLE "0.512 0.128 0.032 0.01"

enum al3320a_range {
	AL3320A_RANGE_1, /* 33.28 Klx */
	AL3320A_RANGE_2, /* 8.32 Klx  */
	AL3320A_RANGE_3, /* 2.08 Klx  */
	AL3320A_RANGE_4  /* 0.65 Klx  */
};

static const int al3320a_scales[][2] = {
	{0, 512000}, {0, 128000}, {0, 32000}, {0, 10000}
};

static const struct regmap_config al3320a_regmap_config = {
	.reg_bits = 8,
	.val_bits = 8,
	.max_register = AL3320A_REG_HIGH_THRESH_HIGH,
};

struct al3320a_data {
	struct regmap *regmap;
};

static const struct iio_chan_spec al3320a_channels[] = {
	{
		.type	= IIO_LIGHT,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
				      BIT(IIO_CHAN_INFO_SCALE),
	}
};

static IIO_CONST_ATTR(in_illuminance_scale_available, AL3320A_SCALE_AVAILABLE);

static struct attribute *al3320a_attributes[] = {
	&iio_const_attr_in_illuminance_scale_available.dev_attr.attr,
	NULL,
};

static const struct attribute_group al3320a_attribute_group = {
	.attrs = al3320a_attributes,
};

static int al3320a_set_pwr_on(struct al3320a_data *data)
{
	return regmap_write(data->regmap, AL3320A_REG_CONFIG, AL3320A_CONFIG_ENABLE);
}

static void al3320a_set_pwr_off(void *_data)
{
	struct al3320a_data *data = _data;
	struct device *dev = regmap_get_device(data->regmap);
	int ret;

	ret = regmap_write(data->regmap, AL3320A_REG_CONFIG, AL3320A_CONFIG_DISABLE);
	if (ret)
		dev_err(dev, "failed to write system register\n");
}

static int al3320a_init(struct al3320a_data *data)
{
	struct device *dev = regmap_get_device(data->regmap);
	int ret;

	ret = al3320a_set_pwr_on(data);
	if (ret)
		return ret;

	ret = devm_add_action_or_reset(dev, al3320a_set_pwr_off, data);
	if (ret)
		return ret;

	ret = regmap_write(data->regmap, AL3320A_REG_CONFIG_RANGE,
			   FIELD_PREP(AL3320A_GAIN_MASK, AL3320A_RANGE_3));
	if (ret)
		return ret;

	ret = regmap_write(data->regmap, AL3320A_REG_MEAN_TIME,
			   AL3320A_DEFAULT_MEAN_TIME);
	if (ret)
		return ret;

	return regmap_write(data->regmap, AL3320A_REG_WAIT,
			    AL3320A_DEFAULT_WAIT_TIME);
}

static int al3320a_read_raw(struct iio_dev *indio_dev,
			    struct iio_chan_spec const *chan, int *val,
			    int *val2, long mask)
{
	struct al3320a_data *data = iio_priv(indio_dev);
	int ret, gain, raw;

	switch (mask) {
	case IIO_CHAN_INFO_RAW:
		/*
		 * ALS ADC value is stored in two adjacent registers:
		 * - low byte of output is stored at AL3320A_REG_DATA_LOW
		 * - high byte of output is stored at AL3320A_REG_DATA_LOW + 1
		 */
		ret = regmap_read(data->regmap, AL3320A_REG_DATA_LOW, &raw);
		if (ret)
			return ret;

		*val = raw;

		return IIO_VAL_INT;
	case IIO_CHAN_INFO_SCALE:
		ret = regmap_read(data->regmap, AL3320A_REG_CONFIG_RANGE, &gain);
		if (ret)
			return ret;

		gain = FIELD_GET(AL3320A_GAIN_MASK, gain);
		*val = al3320a_scales[gain][0];
		*val2 = al3320a_scales[gain][1];

		return IIO_VAL_INT_PLUS_MICRO;
	}
	return -EINVAL;
}

static int al3320a_write_raw(struct iio_dev *indio_dev,
			     struct iio_chan_spec const *chan, int val,
			     int val2, long mask)
{
	struct al3320a_data *data = iio_priv(indio_dev);
	unsigned int i;

	switch (mask) {
	case IIO_CHAN_INFO_SCALE:
		for (i = 0; i < ARRAY_SIZE(al3320a_scales); i++) {
			if (val != al3320a_scales[i][0] ||
			    val2 != al3320a_scales[i][1])
				continue;

			return regmap_write(data->regmap, AL3320A_REG_CONFIG_RANGE,
					    FIELD_PREP(AL3320A_GAIN_MASK, i));
		}
		break;
	}
	return -EINVAL;
}

static const struct iio_info al3320a_info = {
	.read_raw	= al3320a_read_raw,
	.write_raw	= al3320a_write_raw,
	.attrs		= &al3320a_attribute_group,
};

static int al3320a_probe(struct i2c_client *client)
{
	struct al3320a_data *data;
	struct device *dev = &client->dev;
	struct iio_dev *indio_dev;
	int ret;

	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
	if (!indio_dev)
		return -ENOMEM;

	data = iio_priv(indio_dev);
	i2c_set_clientdata(client, indio_dev);

	data->regmap = devm_regmap_init_i2c(client, &al3320a_regmap_config);
	if (IS_ERR(data->regmap))
		return dev_err_probe(dev, PTR_ERR(data->regmap),
				     "cannot allocate regmap\n");

	indio_dev->info = &al3320a_info;
	indio_dev->name = "al3320a";
	indio_dev->channels = al3320a_channels;
	indio_dev->num_channels = ARRAY_SIZE(al3320a_channels);
	indio_dev->modes = INDIO_DIRECT_MODE;

	ret = al3320a_init(data);
	if (ret < 0) {
		dev_err(dev, "al3320a chip init failed\n");
		return ret;
	}

	return devm_iio_device_register(dev, indio_dev);
}

static int al3320a_suspend(struct device *dev)
{
	struct al3320a_data *data = iio_priv(dev_get_drvdata(dev));

	al3320a_set_pwr_off(data);
	return 0;
}

static int al3320a_resume(struct device *dev)
{
	struct al3320a_data *data = iio_priv(dev_get_drvdata(dev));

	return al3320a_set_pwr_on(data);
}

static DEFINE_SIMPLE_DEV_PM_OPS(al3320a_pm_ops, al3320a_suspend,
				al3320a_resume);

static const struct i2c_device_id al3320a_id[] = {
	{ "al3320a" },
	{ }
};
MODULE_DEVICE_TABLE(i2c, al3320a_id);

static const struct of_device_id al3320a_of_match[] = {
	{ .compatible = "dynaimage,al3320a", },
	{ }
};
MODULE_DEVICE_TABLE(of, al3320a_of_match);

static const struct acpi_device_id al3320a_acpi_match[] = {
	{"CALS0001"},
	{ }
};
MODULE_DEVICE_TABLE(acpi, al3320a_acpi_match);

static struct i2c_driver al3320a_driver = {
	.driver = {
		.name = "al3320a",
		.of_match_table = al3320a_of_match,
		.pm = pm_sleep_ptr(&al3320a_pm_ops),
		.acpi_match_table = al3320a_acpi_match,
	},
	.probe		= al3320a_probe,
	.id_table	= al3320a_id,
};

module_i2c_driver(al3320a_driver);

MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
MODULE_DESCRIPTION("AL3320A Ambient Light Sensor driver");
MODULE_LICENSE("GPL v2");