/* SPDX-License-Identifier: GPL-2.0 */
/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *
 ******************************************************************************/
#ifndef __HAL_COMMON_REG_H__
#define __HAL_COMMON_REG_H__


#define MAC_ADDR_LEN				6

#define HAL_NAV_UPPER_UNIT		128		/*  micro-second */

/*  8188E PKT_BUFF_ACCESS_CTRL value */
#define TXPKT_BUF_SELECT				0x69
#define RXPKT_BUF_SELECT				0xA5
#define DISABLE_TRXPKT_BUF_ACCESS		0x0

/*  */
/*  */
/*  */

/*  */
/*  */
/* 	0x0000h ~ 0x00FFh	System Configuration */
/*  */
/*  */
#define REG_SYS_ISO_CTRL				0x0000
#define REG_SYS_FUNC_EN				0x0002
#define REG_APS_FSMCO					0x0004
#define REG_SYS_CLKR					0x0008
#define REG_9346CR						0x000A
#define REG_SYS_EEPROM_CTRL			0x000A
#define REG_EE_VPD						0x000C
#define REG_AFE_MISC					0x0010
#define REG_SPS0_CTRL					0x0011
#define REG_SPS0_CTRL_6					0x0016
#define REG_POWER_OFF_IN_PROCESS		0x0017
#define REG_SPS_OCP_CFG				0x0018
#define REG_RSV_CTRL					0x001C
#define REG_RF_CTRL						0x001F
#define REG_LDOA15_CTRL				0x0020
#define REG_LDOV12D_CTRL				0x0021
#define REG_LDOHCI12_CTRL				0x0022
#define REG_LPLDO_CTRL					0x0023
#define REG_AFE_XTAL_CTRL				0x0024
#define REG_AFE_LDO_CTRL				0x0027 /*  1.5v for 8188EE test chip, 1.4v for MP chip */
#define REG_AFE_PLL_CTRL				0x0028
#define REG_MAC_PHY_CTRL				0x002c /* for 92d, DMDP, SMSP, DMSP contrl */
#define REG_APE_PLL_CTRL_EXT			0x002c
#define REG_EFUSE_CTRL					0x0030
#define REG_EFUSE_TEST					0x0034
#define REG_PWR_DATA					0x0038
#define REG_CAL_TIMER					0x003C
#define REG_ACLK_MON					0x003E
#define REG_GPIO_MUXCFG				0x0040
#define REG_GPIO_IO_SEL					0x0042
#define REG_MAC_PINMUX_CFG			0x0043
#define REG_GPIO_PIN_CTRL				0x0044
#define REG_GPIO_INTM					0x0048
#define REG_LEDCFG0						0x004C
#define REG_LEDCFG1						0x004D
#define REG_LEDCFG2						0x004E
#define REG_LEDCFG3						0x004F
#define REG_FSIMR						0x0050
#define REG_FSISR						0x0054
#define REG_HSIMR						0x0058
#define REG_HSISR						0x005c
#define REG_GPIO_PIN_CTRL_2			0x0060 /*  RTL8723 WIFI/BT/GPS Multi-Function GPIO Pin Control. */
#define REG_GPIO_IO_SEL_2				0x0062 /*  RTL8723 WIFI/BT/GPS Multi-Function GPIO Select. */
#define REG_MULTI_FUNC_CTRL			0x0068 /*  RTL8723 WIFI/BT/GPS Multi-Function control source. */
#define REG_GSSR						0x006c
#define REG_AFE_XTAL_CTRL_EXT			0x0078 /* RTL8188E */
#define REG_MCUFWDL					0x0080
#define REG_MCUTSTCFG					0x0084
#define REG_FDHM0						0x0088
#define REG_EFUSE_ACCESS				0x00CF	/*  Efuse access protection for RTL8723 */
#define REG_BIST_SCAN					0x00D0
#define REG_BIST_RPT					0x00D4
#define REG_BIST_ROM_RPT				0x00D8
#define REG_USB_SIE_INTF				0x00E0
#define REG_PCIE_MIO_INTF				0x00E4
#define REG_PCIE_MIO_INTD				0x00E8
#define REG_HPON_FSM					0x00EC
#define REG_SYS_CFG						0x00F0
#define REG_GPIO_OUTSTS				0x00F4	/*  For RTL8723 only. */
#define REG_TYPE_ID						0x00FC

/*  */
/*  2010/12/29 MH Add for 92D */
/*  */
#define REG_MAC_PHY_CTRL_NORMAL		0x00f8


/*  */
/*  */
/* 	0x0100h ~ 0x01FFh	MACTOP General Configuration */
/*  */
/*  */
#define REG_CR							0x0100
#define REG_PBP							0x0104
#define REG_PKT_BUFF_ACCESS_CTRL		0x0106
#define REG_TRXDMA_CTRL				0x010C
#define REG_TRXFF_BNDY					0x0114
#define REG_TRXFF_STATUS				0x0118
#define REG_RXFF_PTR					0x011C
#define REG_HIMR						0x0120
#define REG_HISR						0x0124
#define REG_HIMRE						0x0128
#define REG_HISRE						0x012C
#define REG_CPWM						0x012F
#define REG_FWIMR						0x0130
#define REG_FWISR						0x0134
#define REG_FTIMR						0x0138
#define REG_PKTBUF_DBG_CTRL			0x0140
#define REG_RXPKTBUF_CTRL				(REG_PKTBUF_DBG_CTRL+2)
#define REG_PKTBUF_DBG_DATA_L			0x0144
#define REG_PKTBUF_DBG_DATA_H		0x0148

#define REG_TC0_CTRL					0x0150
#define REG_TC1_CTRL					0x0154
#define REG_TC2_CTRL					0x0158
#define REG_TC3_CTRL					0x015C
#define REG_TC4_CTRL					0x0160
#define REG_TCUNIT_BASE				0x0164
#define REG_MBIST_START				0x0174
#define REG_MBIST_DONE					0x0178
#define REG_MBIST_FAIL					0x017C
#define REG_C2HEVT_MSG_NORMAL		0x01A0
#define REG_C2HEVT_CLEAR				0x01AF
#define REG_MCUTST_1					0x01c0
#define REG_FMETHR						0x01C8
#define REG_HMETFR						0x01CC
#define REG_HMEBOX_0					0x01D0
#define REG_HMEBOX_1					0x01D4
#define REG_HMEBOX_2					0x01D8
#define REG_HMEBOX_3					0x01DC
#define REG_LLT_INIT					0x01E0


/*  */
/*  */
/* 	0x0200h ~ 0x027Fh	TXDMA Configuration */
/*  */
/*  */
#define REG_RQPN						0x0200
#define REG_FIFOPAGE					0x0204
#define REG_TDECTRL						0x0208
#define REG_TXDMA_OFFSET_CHK			0x020C
#define REG_TXDMA_STATUS				0x0210
#define REG_RQPN_NPQ					0x0214
#define REG_AUTO_LLT					0x0224


/*  */
/*  */
/* 	0x0280h ~ 0x02FFh	RXDMA Configuration */
/*  */
/*  */
#define REG_RXDMA_AGG_PG_TH			0x0280
#define REG_RXPKT_NUM					0x0284
#define REG_RXDMA_STATUS				0x0288

/*  */
/*  */
/* 	0x0300h ~ 0x03FFh	PCIe */
/*  */
/*  */
#define REG_PCIE_CTRL_REG				0x0300
#define REG_INT_MIG						0x0304	/*  Interrupt Migration */
#define REG_BCNQ_DESA					0x0308	/*  TX Beacon Descriptor Address */
#define REG_HQ_DESA					0x0310	/*  TX High Queue Descriptor Address */
#define REG_MGQ_DESA					0x0318	/*  TX Manage Queue Descriptor Address */
#define REG_VOQ_DESA					0x0320	/*  TX VO Queue Descriptor Address */
#define REG_VIQ_DESA					0x0328	/*  TX VI Queue Descriptor Address */
#define REG_BEQ_DESA					0x0330	/*  TX BE Queue Descriptor Address */
#define REG_BKQ_DESA					0x0338	/*  TX BK Queue Descriptor Address */
#define REG_RX_DESA						0x0340	/*  RX Queue	Descriptor Address */
/* sherry added for DBI Read/Write  20091126 */
#define REG_DBI_WDATA					0x0348	/*  Backdoor REG for Access Configuration */
#define REG_DBI_RDATA				0x034C	/* Backdoor REG for Access Configuration */
#define REG_DBI_CTRL					0x0350	/* Backdoor REG for Access Configuration */
#define REG_DBI_FLAG					0x0352	/* Backdoor REG for Access Configuration */
#define REG_MDIO						0x0354	/*  MDIO for Access PCIE PHY */
#define REG_DBG_SEL						0x0360	/*  Debug Selection Register */
#define REG_PCIE_HRPWM					0x0361	/* PCIe RPWM */
#define REG_PCIE_HCPWM					0x0363	/* PCIe CPWM */
#define REG_WATCH_DOG					0x0368

/*  RTL8723 series ------------------------------- */
#define REG_PCIE_HISR_EN				0x0394	/* PCIE Local Interrupt Enable Register */
#define REG_PCIE_HISR					0x03A0
#define REG_PCIE_HISRE					0x03A4
#define REG_PCIE_HIMR					0x03A8
#define REG_PCIE_HIMRE					0x03AC

#define REG_USB_HIMR					0xFE38
#define REG_USB_HIMRE					0xFE3C
#define REG_USB_HISR					0xFE78
#define REG_USB_HISRE					0xFE7C


/*  */
/*  */
/* 	0x0400h ~ 0x047Fh	Protocol Configuration */
/*  */
/*  */
#define REG_VOQ_INFORMATION			0x0400
#define REG_VIQ_INFORMATION			0x0404
#define REG_BEQ_INFORMATION			0x0408
#define REG_BKQ_INFORMATION			0x040C
#define REG_MGQ_INFORMATION			0x0410
#define REG_HGQ_INFORMATION			0x0414
#define REG_BCNQ_INFORMATION			0x0418
#define REG_TXPKT_EMPTY				0x041A
#define REG_CPU_MGQ_INFORMATION		0x041C
#define REG_FWHW_TXQ_CTRL				0x0420
#define REG_HWSEQ_CTRL					0x0423
#define REG_BCNQ_BDNY					0x0424
#define REG_MGQ_BDNY					0x0425
#define REG_LIFETIME_CTRL				0x0426
#define REG_MULTI_BCNQ_OFFSET			0x0427
#define REG_SPEC_SIFS					0x0428
#define REG_RL							0x042A
#define REG_DARFRC						0x0430
#define REG_RARFRC						0x0438
#define REG_RRSR						0x0440
#define REG_ARFR0						0x0444
#define REG_ARFR1						0x0448
#define REG_ARFR2						0x044C
#define REG_ARFR3						0x0450
#define REG_BCNQ1_BDNY					0x0457

#define REG_AGGLEN_LMT					0x0458
#define REG_AMPDU_MIN_SPACE			0x045C
#define REG_WMAC_LBK_BF_HD			0x045D
#define REG_FAST_EDCA_CTRL				0x0460
#define REG_RD_RESP_PKT_TH				0x0463

#define REG_INIRTS_RATE_SEL				0x0480
#define REG_INIDATA_RATE_SEL			0x0484

#define REG_POWER_STAGE1				0x04B4
#define REG_POWER_STAGE2				0x04B8
#define REG_PKT_VO_VI_LIFE_TIME		0x04C0
#define REG_PKT_BE_BK_LIFE_TIME		0x04C2
#define REG_STBC_SETTING				0x04C4
#define REG_QUEUE_CTRL					0x04C6
#define REG_SINGLE_AMPDU_CTRL			0x04c7
#define REG_PROT_MODE_CTRL			0x04C8
#define REG_MAX_AGGR_NUM				0x04CA
#define REG_RTS_MAX_AGGR_NUM			0x04CB
#define REG_BAR_MODE_CTRL				0x04CC
#define REG_RA_TRY_RATE_AGG_LMT		0x04CF
#define REG_EARLY_MODE_CONTROL		0x04D0
#define REG_MACID_SLEEP				0x04D4
#define REG_NQOS_SEQ					0x04DC
#define REG_QOS_SEQ					0x04DE
#define REG_NEED_CPU_HANDLE			0x04E0
#define REG_PKT_LOSE_RPT				0x04E1
#define REG_PTCL_ERR_STATUS			0x04E2
#define REG_TX_RPT_CTRL					0x04EC
#define REG_TX_RPT_TIME					0x04F0	/*  2 byte */
#define REG_DUMMY						0x04FC

/*  */
/*  */
/* 	0x0500h ~ 0x05FFh	EDCA Configuration */
/*  */
/*  */
#define REG_EDCA_VO_PARAM				0x0500
#define REG_EDCA_VI_PARAM				0x0504
#define REG_EDCA_BE_PARAM				0x0508
#define REG_EDCA_BK_PARAM				0x050C
#define REG_BCNTCFG						0x0510
#define REG_PIFS							0x0512
#define REG_RDG_PIFS					0x0513
#define REG_SIFS_CTX					0x0514
#define REG_SIFS_TRX					0x0516
#define REG_TSFTR_SYN_OFFSET			0x0518
#define REG_AGGR_BREAK_TIME			0x051A
#define REG_SLOT						0x051B
#define REG_TX_PTCL_CTRL				0x0520
#define REG_TXPAUSE						0x0522
#define REG_DIS_TXREQ_CLR				0x0523
#define REG_RD_CTRL						0x0524
/*  */
/*  Format for offset 540h-542h: */
/* 	[3:0]:   TBTT prohibit setup in unit of 32us. The time for HW getting beacon content before TBTT. */
/* 	[7:4]:   Reserved. */
/* 	[19:8]:  TBTT prohibit hold in unit of 32us. The time for HW holding to send the beacon packet. */
/* 	[23:20]: Reserved */
/*  Description: */
/* 	              | */
/*      |<--Setup--|--Hold------------>| */
/* 	--------------|---------------------- */
/*                 | */
/*                TBTT */
/*  Note: We cannot update beacon content to HW or send any AC packets during the time between Setup and Hold. */
/*  Described by Designer Tim and Bruce, 2011-01-14. */
/*  */
#define REG_TBTT_PROHIBIT				0x0540
#define REG_RD_NAV_NXT					0x0544
#define REG_NAV_PROT_LEN				0x0546
#define REG_BCN_CTRL					0x0550
#define REG_BCN_CTRL_1					0x0551
#define REG_MBID_NUM					0x0552
#define REG_DUAL_TSF_RST				0x0553
#define REG_BCN_INTERVAL				0x0554	/*  The same as REG_MBSSID_BCN_SPACE */
#define REG_DRVERLYINT					0x0558
#define REG_BCNDMATIM					0x0559
#define REG_ATIMWND					0x055A
#define REG_USTIME_TSF					0x055C
#define REG_BCN_MAX_ERR				0x055D
#define REG_RXTSF_OFFSET_CCK			0x055E
#define REG_RXTSF_OFFSET_OFDM			0x055F
#define REG_TSFTR						0x0560
#define REG_TSFTR1						0x0568	/*  HW Port 1 TSF Register */
#define REG_ATIMWND_1					0x0570
#define REG_P2P_CTWIN					0x0572 /*  1 Byte long (in unit of TU) */
#define REG_PSTIMER						0x0580
#define REG_TIMER0						0x0584
#define REG_TIMER1						0x0588
#define REG_ACMHWCTRL					0x05C0
#define REG_NOA_DESC_SEL				0x05CF
#define REG_NOA_DESC_DURATION		0x05E0
#define REG_NOA_DESC_INTERVAL			0x05E4
#define REG_NOA_DESC_START			0x05E8
#define REG_NOA_DESC_COUNT			0x05EC

#define REG_DMC							0x05F0	/* Dual MAC Co-Existence Register */
#define REG_SCH_TX_CMD					0x05F8

#define REG_FW_RESET_TSF_CNT_1		0x05FC
#define REG_FW_RESET_TSF_CNT_0		0x05FD
#define REG_FW_BCN_DIS_CNT			0x05FE

/*  */
/*  */
/* 	0x0600h ~ 0x07FFh	WMAC Configuration */
/*  */
/*  */
#define REG_APSD_CTRL					0x0600
#define REG_BWOPMODE					0x0603
#define REG_TCR							0x0604
#define REG_RCR							0x0608
#define REG_RX_PKT_LIMIT				0x060C
#define REG_RX_DLK_TIME				0x060D
#define REG_RX_DRVINFO_SZ				0x060F

#define REG_MACID						0x0610
#define REG_BSSID						0x0618
#define REG_MAR							0x0620
#define REG_MBIDCAMCFG					0x0628

#define REG_PNO_STATUS					0x0631
#define REG_USTIME_EDCA				0x0638
#define REG_MAC_SPEC_SIFS				0x063A
/*  20100719 Joseph: Hardware register definition change. (HW datasheet v54) */
#define REG_RESP_SIFS_CCK				0x063C	/*  [15:8]SIFS_R2T_OFDM, [7:0]SIFS_R2T_CCK */
#define REG_RESP_SIFS_OFDM                    0x063E	/*  [15:8]SIFS_T2T_OFDM, [7:0]SIFS_T2T_CCK */

#define REG_ACKTO						0x0640
#define REG_CTS2TO						0x0641
#define REG_EIFS							0x0642


/* RXERR_RPT */
#define RXERR_TYPE_OFDM_PPDU			0
#define RXERR_TYPE_OFDMfalse_ALARM	1
#define RXERR_TYPE_OFDM_MPDU_OK			2
#define RXERR_TYPE_OFDM_MPDU_FAIL	3
#define RXERR_TYPE_CCK_PPDU			4
#define RXERR_TYPE_CCKfalse_ALARM	5
#define RXERR_TYPE_CCK_MPDU_OK		6
#define RXERR_TYPE_CCK_MPDU_FAIL		7
#define RXERR_TYPE_HT_PPDU				8
#define RXERR_TYPE_HTfalse_ALARM	9
#define RXERR_TYPE_HT_MPDU_TOTAL		10
#define RXERR_TYPE_HT_MPDU_OK			11
#define RXERR_TYPE_HT_MPDU_FAIL			12
#define RXERR_TYPE_RX_FULL_DROP			15

#define RXERR_COUNTER_MASK			0xFFFFF
#define RXERR_RPT_RST					BIT(27)
#define _RXERR_RPT_SEL(type)			((type) << 28)

/*  */
/*  Note: */
/* 	The NAV upper value is very important to WiFi 11n 5.2.3 NAV test. The default value is */
/* 	always too small, but the WiFi TestPlan test by 25, 000 microseconds of NAV through sending */
/* 	CTS in the air. We must update this value greater than 25, 000 microseconds to pass the item. */
/* 	The offset of NAV_UPPER in 8192C Spec is incorrect, and the offset should be 0x0652. Commented */
/* 	by SD1 Scott. */
/*  By Bruce, 2011-07-18. */
/*  */
#define REG_NAV_UPPER					0x0652	/*  unit of 128 */

/* WMA, BA, CCX */
#define REG_NAV_CTRL					0x0650
#define REG_BACAMCMD					0x0654
#define REG_BACAMCONTENT				0x0658
#define REG_LBDLY						0x0660
#define REG_FWDLY						0x0661
#define REG_RXERR_RPT					0x0664
#define REG_WMAC_TRXPTCL_CTL			0x0668

/*  Security */
#define REG_CAMCMD						0x0670
#define REG_CAMWRITE					0x0674
#define REG_CAMREAD					0x0678
#define REG_CAMDBG						0x067C
#define REG_SECCFG						0x0680

/*  Power */
#define REG_WOW_CTRL					0x0690
#define REG_PS_RX_INFO					0x0692
#define REG_UAPSD_TID					0x0693
#define REG_WKFMCAM_CMD				0x0698
#define REG_WKFMCAM_NUM				REG_WKFMCAM_CMD
#define REG_WKFMCAM_RWD				0x069C
#define REG_RXFLTMAP0					0x06A0
#define REG_RXFLTMAP1					0x06A2
#define REG_RXFLTMAP2					0x06A4
#define REG_BCN_PSR_RPT				0x06A8
#define REG_BT_COEX_TABLE				0x06C0

/*  Hardware Port 2 */
#define REG_MACID1						0x0700
#define REG_BSSID1						0x0708


/*  */
/*  */
/* 	0xFE00h ~ 0xFE55h	USB Configuration */
/*  */
/*  */
#define REG_USB_INFO					0xFE17
#define REG_USB_SPECIAL_OPTION		0xFE55
#define REG_USB_DMA_AGG_TO			0xFE5B
#define REG_USB_AGG_TO					0xFE5C
#define REG_USB_AGG_TH					0xFE5D

#define REG_USB_HRPWM					0xFE58
#define REG_USB_HCPWM					0xFE57

/*  for 92DU high_Queue low_Queue Normal_Queue select */
#define REG_USB_High_NORMAL_Queue_Select_MAC0	0xFE44
/* define REG_USB_LOW_Queue_Select_MAC0		0xFE45 */
#define REG_USB_High_NORMAL_Queue_Select_MAC1	0xFE47
/* define REG_USB_LOW_Queue_Select_MAC1		0xFE48 */

/*  For test chip */
#define REG_TEST_USB_TXQS				0xFE48
#define REG_TEST_SIE_VID				0xFE60		/*  0xFE60~0xFE61 */
#define REG_TEST_SIE_PID				0xFE62		/*  0xFE62~0xFE63 */
#define REG_TEST_SIE_OPTIONAL			0xFE64
#define REG_TEST_SIE_CHIRP_K			0xFE65
#define REG_TEST_SIE_PHY				0xFE66		/*  0xFE66~0xFE6B */
#define REG_TEST_SIE_MAC_ADDR			0xFE70		/*  0xFE70~0xFE75 */
#define REG_TEST_SIE_STRING			0xFE80		/*  0xFE80~0xFEB9 */


/*  For normal chip */
#define REG_NORMAL_SIE_VID				0xFE60		/*  0xFE60~0xFE61 */
#define REG_NORMAL_SIE_PID				0xFE62		/*  0xFE62~0xFE63 */
#define REG_NORMAL_SIE_OPTIONAL		0xFE64
#define REG_NORMAL_SIE_EP				0xFE65		/*  0xFE65~0xFE67 */
#define REG_NORMAL_SIE_PHY			0xFE68		/*  0xFE68~0xFE6B */
#define REG_NORMAL_SIE_OPTIONAL2		0xFE6C
#define REG_NORMAL_SIE_GPS_EP			0xFE6D		/*  0xFE6D, for RTL8723 only. */
#define REG_NORMAL_SIE_MAC_ADDR		0xFE70		/*  0xFE70~0xFE75 */
#define REG_NORMAL_SIE_STRING			0xFE80		/*  0xFE80~0xFEDF */


/*  */
/*  */
/* 	Redifine 8192C register definition for compatibility */
/*  */
/*  */

/*  TODO: use these definition when using REG_xxx naming rule. */
/*  NOTE: DO NOT Remove these definition. Use later. */

#define EFUSE_CTRL				REG_EFUSE_CTRL		/*  E-Fuse Control. */
#define EFUSE_TEST				REG_EFUSE_TEST		/*  E-Fuse Test. */
#define MSR						(REG_CR + 2)		/*  Media Status register */
/* define ISR						REG_HISR */

#define TSFR						REG_TSFTR			/*  Timing Sync Function Timer Register. */
#define TSFR1					REG_TSFTR1			/*  HW Port 1 TSF Register */

#define PBP						REG_PBP

/*  Redifine MACID register, to compatible prior ICs. */
#define IDR0						REG_MACID			/*  MAC ID Register, Offset 0x0050-0x0053 */
#define IDR4						(REG_MACID + 4)		/*  MAC ID Register, Offset 0x0054-0x0055 */


/*  */
/*  9. Security Control Registers	(Offset:) */
/*  */
#define RWCAM					REG_CAMCMD		/* IN 8190 Data Sheet is called CAMcmd */
#define WCAMI					REG_CAMWRITE	/*  Software write CAM input content */
#define RCAMO					REG_CAMREAD		/*  Software read/write CAM config */
#define CAMDBG					REG_CAMDBG
#define SECR						REG_SECCFG		/* Security Configuration Register */

/*  Unused register */
#define UnusedRegister			0x1BF
#define DCAM					UnusedRegister
#define PSR						UnusedRegister
#define BBAddr					UnusedRegister
#define PhyDataR					UnusedRegister

/*  Min Spacing related settings. */
#define MAX_MSS_DENSITY_2T			0x13
#define MAX_MSS_DENSITY_1T			0x0A

/*  */
/*        8723/8188E Host System Interrupt Status Register (offset 0x5C, 32 byte) */
/*  */
#define HSISR_GPIO12_0_INT				BIT0
#define HSISR_SPS_OCP_INT				BIT5
#define HSISR_RON_INT					BIT6
#define HSISR_PDNINT					BIT7
#define HSISR_GPIO9_INT					BIT25

/*  */
/*        USB INTR CONTENT */
/*  */
#define USB_C2H_CMDID_OFFSET					0
#define USB_C2H_SEQ_OFFSET					1
#define USB_C2H_EVENT_OFFSET					2
#define USB_INTR_CPWM_OFFSET					16
#define USB_INTR_CONTENT_C2H_OFFSET			0
#define USB_INTR_CONTENT_CPWM1_OFFSET		16
#define USB_INTR_CONTENT_CPWM2_OFFSET		20
#define USB_INTR_CONTENT_HISR_OFFSET			48
#define USB_INTR_CONTENT_HISRE_OFFSET		52
#define USB_INTR_CONTENT_LENGTH				56

/*  */
/*        Response Rate Set Register	(offset 0x440, 24bits) */
/*  */
#define RRSR_1M					BIT0
#define RRSR_2M					BIT1
#define RRSR_5_5M				BIT2
#define RRSR_11M				BIT3
#define RRSR_6M					BIT4
#define RRSR_9M					BIT5
#define RRSR_12M				BIT6
#define RRSR_18M				BIT7
#define RRSR_24M				BIT8
#define RRSR_36M				BIT9
#define RRSR_48M				BIT10
#define RRSR_54M				BIT11
#define RRSR_MCS0				BIT12
#define RRSR_MCS1				BIT13
#define RRSR_MCS2				BIT14
#define RRSR_MCS3				BIT15
#define RRSR_MCS4				BIT16
#define RRSR_MCS5				BIT17
#define RRSR_MCS6				BIT18
#define RRSR_MCS7				BIT19

#define RRSR_CCK_RATES (RRSR_11M|RRSR_5_5M|RRSR_2M|RRSR_1M)
#define RRSR_OFDM_RATES (RRSR_54M|RRSR_48M|RRSR_36M|RRSR_24M|RRSR_18M|RRSR_12M|RRSR_9M|RRSR_6M)

/*  WOL bit information */
#define HAL92C_WOL_PTK_UPDATE_EVENT		BIT0
#define HAL92C_WOL_GTK_UPDATE_EVENT		BIT1
#define HAL92C_WOL_DISASSOC_EVENT		BIT2
#define HAL92C_WOL_DEAUTH_EVENT			BIT3
#define HAL92C_WOL_FW_DISCONNECT_EVENT	BIT4

/*  */
/*        Rate Definition */
/*  */
/* CCK */
#define	RATR_1M					0x00000001
#define	RATR_2M					0x00000002
#define	RATR_55M					0x00000004
#define	RATR_11M					0x00000008
/* OFDM */
#define	RATR_6M					0x00000010
#define	RATR_9M					0x00000020
#define	RATR_12M					0x00000040
#define	RATR_18M					0x00000080
#define	RATR_24M					0x00000100
#define	RATR_36M					0x00000200
#define	RATR_48M					0x00000400
#define	RATR_54M					0x00000800
/* MCS 1 Spatial Stream */
#define	RATR_MCS0					0x00001000
#define	RATR_MCS1					0x00002000
#define	RATR_MCS2					0x00004000
#define	RATR_MCS3					0x00008000
#define	RATR_MCS4					0x00010000
#define	RATR_MCS5					0x00020000
#define	RATR_MCS6					0x00040000
#define	RATR_MCS7					0x00080000

/* CCK */
#define RATE_1M					BIT(0)
#define RATE_2M					BIT(1)
#define RATE_5_5M				BIT(2)
#define RATE_11M				BIT(3)
/* OFDM */
#define RATE_6M					BIT(4)
#define RATE_9M					BIT(5)
#define RATE_12M				BIT(6)
#define RATE_18M				BIT(7)
#define RATE_24M				BIT(8)
#define RATE_36M				BIT(9)
#define RATE_48M				BIT(10)
#define RATE_54M				BIT(11)
/* MCS 1 Spatial Stream */
#define RATE_MCS0				BIT(12)
#define RATE_MCS1				BIT(13)
#define RATE_MCS2				BIT(14)
#define RATE_MCS3				BIT(15)
#define RATE_MCS4				BIT(16)
#define RATE_MCS5				BIT(17)
#define RATE_MCS6				BIT(18)
#define RATE_MCS7				BIT(19)

/*  ALL CCK Rate */
#define RATE_BITMAP_ALL			0xFFFFF

/*  Only use CCK 1M rate for ACK */
#define RATE_RRSR_CCK_ONLY_1M		0xFFFF1
#define RATE_RRSR_WITHOUT_CCK		0xFFFF0

/*  */
/*        BW_OPMODE bits				(Offset 0x603, 8bit) */
/*  */
#define BW_OPMODE_20MHZ			BIT2

/*  */
/*        CAM Config Setting (offset 0x680, 1 byte) */
/*  */
#define CAM_VALID				BIT15
#define CAM_NOTVALID			0x0000
#define CAM_USEDK				BIT5

#define CAM_CONTENT_COUNT	8

#define CAM_NONE				0x0
#define CAM_WEP40				0x01
#define CAM_TKIP				0x02
#define CAM_AES					0x04
#define CAM_WEP104				0x05
#define CAM_SMS4				0x6

#define TOTAL_CAM_ENTRY		32
#define HALF_CAM_ENTRY			16

#define CAM_CONFIG_USEDK		true
#define CAM_CONFIG_NO_USEDK	false

#define CAM_WRITE				BIT16
#define CAM_READ				0x00000000
#define CAM_POLLINIG			BIT31

/*  */
/*  10. Power Save Control Registers */
/*  */
#define WOW_PMEN				BIT0 /*  Power management Enable. */
#define WOW_WOMEN				BIT1 /*  WoW function on or off. */
#define WOW_MAGIC				BIT2 /*  Magic packet */
#define WOW_UWF				BIT3 /*  Unicast Wakeup frame. */

/*  */
/*  12. Host Interrupt Status Registers */
/*  */
/*  */
/*       8190 IMR/ISR bits */
/*  */
#define IMR8190_DISABLED		0x0
#define IMR_DISABLED			0x0
/*  IMR DW0 Bit 0-31 */
#define IMR_BCNDMAINT6			BIT31		/*  Beacon DMA Interrupt 6 */
#define IMR_BCNDMAINT5			BIT30		/*  Beacon DMA Interrupt 5 */
#define IMR_BCNDMAINT4			BIT29		/*  Beacon DMA Interrupt 4 */
#define IMR_BCNDMAINT3			BIT28		/*  Beacon DMA Interrupt 3 */
#define IMR_BCNDMAINT2			BIT27		/*  Beacon DMA Interrupt 2 */
#define IMR_BCNDMAINT1			BIT26		/*  Beacon DMA Interrupt 1 */
#define IMR_BCNDOK8				BIT25		/*  Beacon Queue DMA OK Interrupt 8 */
#define IMR_BCNDOK7				BIT24		/*  Beacon Queue DMA OK Interrupt 7 */
#define IMR_BCNDOK6				BIT23		/*  Beacon Queue DMA OK Interrupt 6 */
#define IMR_BCNDOK5				BIT22		/*  Beacon Queue DMA OK Interrupt 5 */
#define IMR_BCNDOK4				BIT21		/*  Beacon Queue DMA OK Interrupt 4 */
#define IMR_BCNDOK3				BIT20		/*  Beacon Queue DMA OK Interrupt 3 */
#define IMR_BCNDOK2				BIT19		/*  Beacon Queue DMA OK Interrupt 2 */
#define IMR_BCNDOK1				BIT18		/*  Beacon Queue DMA OK Interrupt 1 */
#define IMR_TIMEOUT2			BIT17		/*  Timeout interrupt 2 */
#define IMR_TIMEOUT1			BIT16		/*  Timeout interrupt 1 */
#define IMR_TXFOVW				BIT15		/*  Transmit FIFO Overflow */
#define IMR_PSTIMEOUT			BIT14		/*  Power save time out interrupt */
#define IMR_BcnInt				BIT13		/*  Beacon DMA Interrupt 0 */
#define IMR_RXFOVW				BIT12		/*  Receive FIFO Overflow */
#define IMR_RDU					BIT11		/*  Receive Descriptor Unavailable */
#define IMR_ATIMEND				BIT10		/*  For 92C, ATIM Window End Interrupt. For 8723 and later ICs, it also means P2P CTWin End interrupt. */
#define IMR_BDOK				BIT9		/*  Beacon Queue DMA OK Interrupt */
#define IMR_HIGHDOK				BIT8		/*  High Queue DMA OK Interrupt */
#define IMR_TBDOK				BIT7		/*  Transmit Beacon OK interrupt */
#define IMR_MGNTDOK			BIT6		/*  Management Queue DMA OK Interrupt */
#define IMR_TBDER				BIT5		/*  For 92C, Transmit Beacon Error Interrupt */
#define IMR_BKDOK				BIT4		/*  AC_BK DMA OK Interrupt */
#define IMR_BEDOK				BIT3		/*  AC_BE DMA OK Interrupt */
#define IMR_VIDOK				BIT2		/*  AC_VI DMA OK Interrupt */
#define IMR_VODOK				BIT1		/*  AC_VO DMA Interrupt */
#define IMR_ROK					BIT0		/*  Receive DMA OK Interrupt */

/*  13. Host Interrupt Status Extension Register	 (Offset: 0x012C-012Eh) */
#define IMR_TSF_BIT32_TOGGLE	BIT15
#define IMR_BcnInt_E				BIT12
#define IMR_TXERR				BIT11
#define IMR_RXERR				BIT10
#define IMR_C2HCMD				BIT9
#define IMR_CPWM				BIT8
/* RSVD [2-7] */
#define IMR_OCPINT				BIT1
#define IMR_WLANOFF			BIT0

/*  */
/*        8192C (RCR) Receive Configuration Register	(Offset 0x608, 32 bits) */
/*  */
#define RCR_APPFCS				BIT31	/*  WMAC append FCS after pauload */
#define RCR_APP_MIC				BIT30	/*  MACRX will retain the MIC at the bottom of the packet. */
#define RCR_APP_ICV				BIT29	/*  MACRX will retain the ICV at the bottom of the packet. */
#define RCR_APP_PHYST_RXFF		BIT28	/*  PHY Status is appended before RX packet in RXFF */
#define RCR_APP_BA_SSN			BIT27	/*  SSN of previous TXBA is appended as after original RXDESC as the 4-th DW of RXDESC. */
#define RCR_NONQOS_VHT			BIT26	/*  Reserved */
#define RCR_RSVD_BIT25			BIT25	/*  Reserved */
#define RCR_ENMBID				BIT24	/*  Enable Multiple BssId. Only response ACK to the packets whose DID(A1) matching to the addresses in the MBSSID CAM Entries. */
#define RCR_LSIGEN				BIT23	/*  Enable LSIG TXOP Protection function. Search KEYCAM for each rx packet to check if LSIGEN bit is set. */
#define RCR_MFBEN				BIT22	/*  Enable immediate MCS Feedback function. When Rx packet with MRQ = 1'b1, then search KEYCAM to find sender's MCS Feedback function and send response. */
#define RCR_RSVD_BIT21			BIT21	/*  Reserved */
#define RCR_RSVD_BIT20			BIT20	/*  Reserved */
#define RCR_RSVD_BIT19			BIT19	/*  Reserved */
#define RCR_TIM_PARSER_EN		BIT18	/*  RX Beacon TIM Parser. */
#define RCR_BM_DATA_EN			BIT17	/*  Broadcast data packet interrupt enable. */
#define RCR_UC_DATA_EN			BIT16	/*  Unicast data packet interrupt enable. */
#define RCR_RSVD_BIT15			BIT15	/*  Reserved */
#define RCR_HTC_LOC_CTRL		BIT14	/*  MFC<--HTC = 1 MFC-->HTC = 0 */
#define RCR_AMF					BIT13	/*  Accept management type frame */
#define RCR_ACF					BIT12	/*  Accept control type frame. Control frames BA, BAR, and PS-Poll (when in AP mode) are not controlled by this bit. They are controlled by ADF. */
#define RCR_ADF					BIT11	/*  Accept data type frame. This bit also regulates BA, BAR, and PS-Poll (AP mode only). */
#define RCR_RSVD_BIT10			BIT10	/*  Reserved */
#define RCR_AICV					BIT9		/*  Accept ICV error packet */
#define RCR_ACRC32				BIT8		/*  Accept CRC32 error packet */
#define RCR_CBSSID_BCN			BIT7		/*  Accept BSSID match packet (Rx beacon, probe rsp) */
#define RCR_CBSSID_DATA		BIT6		/*  Accept BSSID match packet (Data) */
#define RCR_CBSSID				RCR_CBSSID_DATA	/*  Accept BSSID match packet */
#define RCR_APWRMGT			BIT5		/*  Accept power management packet */
#define RCR_ADD3				BIT4		/*  Accept address 3 match packet */
#define RCR_AB					BIT3		/*  Accept broadcast packet */
#define RCR_AM					BIT2		/*  Accept multicast packet */
#define RCR_APM					BIT1		/*  Accept physical match packet */
#define RCR_AAP					BIT0		/*  Accept all unicast packet */


/*  */
/*  */
/* 	0x0000h ~ 0x00FFh	System Configuration */
/*  */
/*  */

/* 2 SYS_ISO_CTRL */
#define ISO_MD2PP				BIT(0)
#define ISO_UA2USB				BIT(1)
#define ISO_UD2CORE				BIT(2)
#define ISO_PA2PCIE				BIT(3)
#define ISO_PD2CORE				BIT(4)
#define ISO_IP2MAC				BIT(5)
#define ISO_DIOP					BIT(6)
#define ISO_DIOE					BIT(7)
#define ISO_EB2CORE				BIT(8)
#define ISO_DIOR					BIT(9)
#define PWC_EV12V				BIT(15)


/* 2 SYS_FUNC_EN */
#define FEN_BBRSTB				BIT(0)
#define FEN_BB_GLB_RSTn		BIT(1)
#define FEN_USBA				BIT(2)
#define FEN_UPLL				BIT(3)
#define FEN_USBD				BIT(4)
#define FEN_DIO_PCIE			BIT(5)
#define FEN_PCIEA				BIT(6)
#define FEN_PPLL					BIT(7)
#define FEN_PCIED				BIT(8)
#define FEN_DIOE				BIT(9)
#define FEN_CPUEN				BIT(10)
#define FEN_DCORE				BIT(11)
#define FEN_ELDR				BIT(12)
#define FEN_EN_25_1				BIT(13)
#define FEN_HWPDN				BIT(14)
#define FEN_MREGEN				BIT(15)

/* 2 APS_FSMCO */
#define PFM_LDALL				BIT(0)
#define PFM_ALDN				BIT(1)
#define PFM_LDKP				BIT(2)
#define PFM_WOWL				BIT(3)
#define EnPDN					BIT(4)
#define PDN_PL					BIT(5)
#define APFM_ONMAC				BIT(8)
#define APFM_OFF				BIT(9)
#define APFM_RSM				BIT(10)
#define AFSM_HSUS				BIT(11)
#define AFSM_PCIE				BIT(12)
#define APDM_MAC				BIT(13)
#define APDM_HOST				BIT(14)
#define APDM_HPDN				BIT(15)
#define RDY_MACON				BIT(16)
#define SUS_HOST				BIT(17)
#define ROP_ALD					BIT(20)
#define ROP_PWR					BIT(21)
#define ROP_SPS					BIT(22)
#define SOP_MRST				BIT(25)
#define SOP_FUSE				BIT(26)
#define SOP_ABG					BIT(27)
#define SOP_AMB					BIT(28)
#define SOP_RCK					BIT(29)
#define SOP_A8M					BIT(30)
#define XOP_BTCK				BIT(31)

/* 2 SYS_CLKR */
#define ANAD16V_EN				BIT(0)
#define ANA8M					BIT(1)
#define MACSLP					BIT(4)
#define LOADER_CLK_EN			BIT(5)


/* 2 9346CR /REG_SYS_EEPROM_CTRL */
#define BOOT_FROM_EEPROM		BIT(4)
#define EEPROMSEL				BIT(4)
#define EEPROM_EN				BIT(5)


/* 2 RF_CTRL */
#define RF_EN					BIT(0)
#define RF_RSTB					BIT(1)
#define RF_SDMRSTB				BIT(2)


/* 2 LDOV12D_CTRL */
#define LDV12_EN				BIT(0)
#define LDV12_SDBY				BIT(1)
#define LPLDO_HSM				BIT(2)
#define LPLDO_LSM_DIS			BIT(3)
#define _LDV12_VADJ(x)			(((x) & 0xF) << 4)


/* 2 EFUSE_TEST (For RTL8723 partially) */
#define EF_TRPT					BIT(7)
#define EF_CELL_SEL				(BIT(8)|BIT(9)) /*  00: Wifi Efuse, 01: BT Efuse0, 10: BT Efuse1, 11: BT Efuse2 */
#define LDOE25_EN				BIT(31)
#define EFUSE_SEL(x)				(((x) & 0x3) << 8)
#define EFUSE_SEL_MASK			0x300
#define EFUSE_WIFI_SEL_0		0x0
#define EFUSE_BT_SEL_0			0x1
#define EFUSE_BT_SEL_1			0x2
#define EFUSE_BT_SEL_2			0x3


/* 2 8051FWDL */
/* 2 MCUFWDL */
#define MCUFWDL_EN				BIT(0)
#define MCUFWDL_RDY			BIT(1)
#define FWDL_ChkSum_rpt		BIT(2)
#define MACINI_RDY				BIT(3)
#define BBINI_RDY				BIT(4)
#define RFINI_RDY				BIT(5)
#define WINTINI_RDY				BIT(6)
#define RAM_DL_SEL				BIT(7)
#define ROM_DLEN				BIT(19)
#define CPRST					BIT(23)


/* 2 REG_SYS_CFG */
#define XCLK_VLD				BIT(0)
#define ACLK_VLD				BIT(1)
#define UCLK_VLD				BIT(2)
#define PCLK_VLD				BIT(3)
#define PCIRSTB					BIT(4)
#define V15_VLD					BIT(5)
#define SW_OFFLOAD_EN			BIT(7)
#define SIC_IDLE					BIT(8)
#define BD_MAC2					BIT(9)
#define BD_MAC1					BIT(10)
#define IC_MACPHY_MODE		BIT(11)
#define CHIP_VER				(BIT(12)|BIT(13)|BIT(14)|BIT(15))
#define BT_FUNC					BIT(16)
#define VENDOR_ID				BIT(19)
#define EXT_VENDOR_ID			(BIT(18)|BIT(19)) /* Currently only for RTL8723B */
#define PAD_HWPD_IDN			BIT(22)
#define TRP_VAUX_EN				BIT(23)	/*  RTL ID */
#define TRP_BT_EN				BIT(24)
#define BD_PKG_SEL				BIT(25)
#define BD_HCI_SEL				BIT(26)
#define TYPE_ID					BIT(27)
#define RF_TYPE_ID				BIT(27)

#define RTL_ID					BIT(23) /*  TestChip ID, 1:Test(RLE); 0:MP(RL) */
#define SPS_SEL					BIT(24) /*  1:LDO regulator mode; 0:Switching regulator mode */


#define CHIP_VER_RTL_MASK		0xF000	/* Bit 12 ~ 15 */
#define CHIP_VER_RTL_SHIFT		12
#define EXT_VENDOR_ID_SHIFT	18

/* 2 REG_GPIO_OUTSTS (For RTL8723 only) */
#define EFS_HCI_SEL				(BIT(0)|BIT(1))
#define PAD_HCI_SEL				(BIT(2)|BIT(3))
#define HCI_SEL					(BIT(4)|BIT(5))
#define PKG_SEL_HCI				BIT(6)
#define FEN_GPS					BIT(7)
#define FEN_BT					BIT(8)
#define FEN_WL					BIT(9)
#define FEN_PCI					BIT(10)
#define FEN_USB					BIT(11)
#define BTRF_HWPDN_N			BIT(12)
#define WLRF_HWPDN_N			BIT(13)
#define PDN_BT_N				BIT(14)
#define PDN_GPS_N				BIT(15)
#define BT_CTL_HWPDN			BIT(16)
#define GPS_CTL_HWPDN			BIT(17)
#define PPHY_SUSB				BIT(20)
#define UPHY_SUSB				BIT(21)
#define PCI_SUSEN				BIT(22)
#define USB_SUSEN				BIT(23)
#define RF_RL_ID					(BIT(31)|BIT(30)|BIT(29)|BIT(28))


/*  */
/*  */
/* 	0x0100h ~ 0x01FFh	MACTOP General Configuration */
/*  */
/*  */

/* 2 Function Enable Registers */
/* 2 CR */
#define HCI_TXDMA_EN			BIT(0)
#define HCI_RXDMA_EN			BIT(1)
#define TXDMA_EN				BIT(2)
#define RXDMA_EN				BIT(3)
#define PROTOCOL_EN				BIT(4)
#define SCHEDULE_EN				BIT(5)
#define MACTXEN					BIT(6)
#define MACRXEN					BIT(7)
#define ENSWBCN					BIT(8)
#define ENSEC					BIT(9)
#define CALTMR_EN				BIT(10)	/*  32k CAL TMR enable */

/*  Network type */
#define _NETTYPE(x)				(((x) & 0x3) << 16)
#define MASK_NETTYPE			0x30000
#define NT_NO_LINK				0x0
#define NT_LINK_AD_HOC			0x1
#define NT_LINK_AP				0x2
#define NT_AS_AP				0x3

/* 2 PBP - Page Size Register */
#define GET_RX_PAGE_SIZE(value)			((value) & 0xF)
#define GET_TX_PAGE_SIZE(value)			(((value) & 0xF0) >> 4)
#define _PSRX_MASK				0xF
#define _PSTX_MASK				0xF0
#define _PSRX(x)				(x)
#define _PSTX(x)				((x) << 4)

#define PBP_64					0x0
#define PBP_128					0x1
#define PBP_256					0x2
#define PBP_512					0x3
#define PBP_1024				0x4


/* 2 TX/RXDMA */
#define RXDMA_ARBBW_EN		BIT(0)
#define RXSHFT_EN				BIT(1)
#define RXDMA_AGG_EN			BIT(2)
#define QS_VO_QUEUE			BIT(8)
#define QS_VI_QUEUE				BIT(9)
#define QS_BE_QUEUE			BIT(10)
#define QS_BK_QUEUE			BIT(11)
#define QS_MANAGER_QUEUE		BIT(12)
#define QS_HIGH_QUEUE			BIT(13)

#define HQSEL_VOQ				BIT(0)
#define HQSEL_VIQ				BIT(1)
#define HQSEL_BEQ				BIT(2)
#define HQSEL_BKQ				BIT(3)
#define HQSEL_MGTQ				BIT(4)
#define HQSEL_HIQ				BIT(5)

/*  For normal driver, 0x10C */
#define _TXDMA_CMQ_MAP(x)			(((x)&0x3) << 16)
#define _TXDMA_HIQ_MAP(x)			(((x)&0x3) << 14)
#define _TXDMA_MGQ_MAP(x)			(((x)&0x3) << 12)
#define _TXDMA_BKQ_MAP(x)			(((x)&0x3) << 10)
#define _TXDMA_BEQ_MAP(x)			(((x)&0x3) << 8)
#define _TXDMA_VIQ_MAP(x)			(((x)&0x3) << 6)
#define _TXDMA_VOQ_MAP(x)			(((x)&0x3) << 4)

#define QUEUE_EXTRA				0
#define QUEUE_LOW				1
#define QUEUE_NORMAL			2
#define QUEUE_HIGH				3


/* 2 TRXFF_BNDY */


/* 2 LLT_INIT */
#define _LLT_NO_ACTIVE				0x0
#define _LLT_WRITE_ACCESS			0x1
#define _LLT_READ_ACCESS			0x2

#define _LLT_INIT_DATA(x)			((x) & 0xFF)
#define _LLT_INIT_ADDR(x)			(((x) & 0xFF) << 8)
#define _LLT_OP(x)					(((x) & 0x3) << 30)
#define _LLT_OP_VALUE(x)			(((x) >> 30) & 0x3)


/*  */
/*  */
/* 	0x0200h ~ 0x027Fh	TXDMA Configuration */
/*  */
/*  */
/* 2 RQPN */
#define _HPQ(x)					((x) & 0xFF)
#define _LPQ(x)					(((x) & 0xFF) << 8)
#define _PUBQ(x)					(((x) & 0xFF) << 16)
#define _NPQ(x)					((x) & 0xFF)			/*  NOTE: in RQPN_NPQ register */
#define _EPQ(x)					(((x) & 0xFF) << 16)	/*  NOTE: in RQPN_EPQ register */


#define HPQ_PUBLIC_DIS			BIT(24)
#define LPQ_PUBLIC_DIS			BIT(25)
#define LD_RQPN					BIT(31)


/* 2 TDECTL */
#define BLK_DESC_NUM_SHIFT			4
#define BLK_DESC_NUM_MASK			0xF


/* 2 TXDMA_OFFSET_CHK */
#define DROP_DATA_EN				BIT(9)

/* 2 AUTO_LLT */
#define BIT_SHIFT_TXPKTNUM 24
#define BIT_MASK_TXPKTNUM 0xff
#define BIT_TXPKTNUM(x) (((x) & BIT_MASK_TXPKTNUM) << BIT_SHIFT_TXPKTNUM)

#define BIT_TDE_DBG_SEL BIT(23)
#define BIT_AUTO_INIT_LLT BIT(16)

#define BIT_SHIFT_Tx_OQT_free_space 8
#define BIT_MASK_Tx_OQT_free_space 0xff
#define BIT_Tx_OQT_free_space(x) (((x) & BIT_MASK_Tx_OQT_free_space) << BIT_SHIFT_Tx_OQT_free_space)


/*  */
/*  */
/* 	0x0280h ~ 0x028Bh	RX DMA Configuration */
/*  */
/*  */

/* 2 REG_RXDMA_CONTROL, 0x0286h */
/*  Write only. When this bit is set, RXDMA will decrease RX PKT counter by one. Before */
/*  this bit is polled, FW shall update RXFF_RD_PTR first. This register is write pulse and auto clear. */
/* define RXPKT_RELEASE_POLL			BIT(0) */
/*  Read only. When RXMA finishes on-going DMA operation, RXMDA will report idle state in */
/*  this bit. FW can start releasing packets after RXDMA entering idle mode. */
/* define RXDMA_IDLE					BIT(1) */
/*  When this bit is set, RXDMA will enter this mode after on-going RXDMA packet to host */
/*  completed, and stop DMA packet to host. RXDMA will then report Default: 0; */
/* define RW_RELEASE_EN				BIT(2) */

/* 2 REG_RXPKT_NUM, 0x0284 */
#define		RXPKT_RELEASE_POLL	BIT(16)
#define	RXDMA_IDLE				BIT(17)
#define	RW_RELEASE_EN			BIT(18)

/*  */
/*  */
/* 	0x0400h ~ 0x047Fh	Protocol Configuration */
/*  */
/*  */
/* 2 FWHW_TXQ_CTRL */
#define EN_AMPDU_RTY_NEW			BIT(7)


/* 2 SPEC SIFS */
#define _SPEC_SIFS_CCK(x)			((x) & 0xFF)
#define _SPEC_SIFS_OFDM(x)			(((x) & 0xFF) << 8)

/* 2 RL */
#define	RETRY_LIMIT_SHORT_SHIFT			8
#define	RETRY_LIMIT_LONG_SHIFT			0

/*  */
/*  */
/* 	0x0500h ~ 0x05FFh	EDCA Configuration */
/*  */
/*  */

/* 2 EDCA setting */
#define AC_PARAM_TXOP_LIMIT_OFFSET		16
#define AC_PARAM_ECW_MAX_OFFSET			12
#define AC_PARAM_ECW_MIN_OFFSET			8
#define AC_PARAM_AIFS_OFFSET				0


#define _LRL(x)					((x) & 0x3F)
#define _SRL(x)					(((x) & 0x3F) << 8)


/* 2 BCN_CTRL */
#define EN_TXBCN_RPT			BIT(2)
#define EN_BCN_FUNCTION		BIT(3)
#define STOP_BCNQ				BIT(6)
#define DIS_RX_BSSID_FIT		BIT(6)

#define DIS_ATIM					BIT(0)
#define DIS_BCNQ_SUB			BIT(1)
#define DIS_TSF_UDT				BIT(4)

/*  The same function but different bit field. */
#define DIS_TSF_UDT0_NORMAL_CHIP	BIT(4)
#define DIS_TSF_UDT0_TEST_CHIP	BIT(5)


/* 2 ACMHWCTRL */
#define AcmHw_HwEn				BIT(0)
#define AcmHw_BeqEn			BIT(1)
#define AcmHw_ViqEn				BIT(2)
#define AcmHw_VoqEn			BIT(3)
#define AcmHw_BeqStatus		BIT(4)
#define AcmHw_ViqStatus			BIT(5)
#define AcmHw_VoqStatus		BIT(6)

/* 2 REG_DUAL_TSF_RST (0x553) */
#define DUAL_TSF_RST_P2P		BIT(4)

/* 2  REG_NOA_DESC_SEL (0x5CF) */
#define NOA_DESC_SEL_0			0
#define NOA_DESC_SEL_1			BIT(4)

/*  */
/*  */
/* 	0x0600h ~ 0x07FFh	WMAC Configuration */
/*  */
/*  */

/* 2 APSD_CTRL */
#define APSDOFF					BIT(6)

/* 2 TCR */
#define TSFRST					BIT(0)
#define DIS_GCLK					BIT(1)
#define PAD_SEL					BIT(2)
#define PWR_ST					BIT(6)
#define PWRBIT_OW_EN			BIT(7)
#define ACRC						BIT(8)
#define CFENDFORM				BIT(9)
#define ICV						BIT(10)


/* 2 RCR */
#define AAP						BIT(0)
#define APM						BIT(1)
#define AM						BIT(2)
#define AB						BIT(3)
#define ADD3						BIT(4)
#define APWRMGT				BIT(5)
#define CBSSID					BIT(6)
#define CBSSID_DATA				BIT(6)
#define CBSSID_BCN				BIT(7)
#define ACRC32					BIT(8)
#define AICV						BIT(9)
#define ADF						BIT(11)
#define ACF						BIT(12)
#define AMF						BIT(13)
#define HTC_LOC_CTRL			BIT(14)
#define UC_DATA_EN				BIT(16)
#define BM_DATA_EN				BIT(17)
#define MFBEN					BIT(22)
#define LSIGEN					BIT(23)
#define EnMBID					BIT(24)
#define FORCEACK				BIT(26)
#define APP_BASSN				BIT(27)
#define APP_PHYSTS				BIT(28)
#define APP_ICV					BIT(29)
#define APP_MIC					BIT(30)
#define APP_FCS					BIT(31)


/* 2 SECCFG */
#define SCR_TxUseDK				BIT(0)			/* Force Tx Use Default Key */
#define SCR_RxUseDK				BIT(1)			/* Force Rx Use Default Key */
#define SCR_TxEncEnable			BIT(2)			/* Enable Tx Encryption */
#define SCR_RxDecEnable			BIT(3)			/* Enable Rx Decryption */
#define SCR_SKByA2				BIT(4)			/* Search kEY BY A2 */
#define SCR_NoSKMC				BIT(5)			/* No Key Search Multicast */
#define SCR_TXBCUSEDK			BIT(6)			/*  Force Tx Broadcast packets Use Default Key */
#define SCR_RXBCUSEDK			BIT(7)			/*  Force Rx Broadcast packets Use Default Key */
#define SCR_CHK_KEYID			BIT(8)

/*  */
/*  */
/* 	SDIO Bus Specification */
/*  */
/*  */

/*  I/O bus domain address mapping */
#define SDIO_LOCAL_BASE		0x10250000
#define WLAN_IOREG_BASE		0x10260000
#define FIRMWARE_FIFO_BASE	0x10270000
#define TX_HIQ_BASE				0x10310000
#define TX_MIQ_BASE				0x10320000
#define TX_LOQ_BASE				0x10330000
#define TX_EPQ_BASE				0x10350000
#define RX_RX0FF_BASE			0x10340000

/* SDIO host local register space mapping. */
#define SDIO_LOCAL_MSK				0x0FFF
#define WLAN_IOREG_MSK			0x7FFF
#define WLAN_FIFO_MSK				0x1FFF	/*  Aggregation Length[12:0] */
#define WLAN_RX0FF_MSK				0x0003

#define SDIO_WITHOUT_REF_DEVICE_ID	0	/*  Without reference to the SDIO Device ID */
#define SDIO_LOCAL_DEVICE_ID			0	/*  0b[16], 000b[15:13] */
#define WLAN_TX_HIQ_DEVICE_ID			4	/*  0b[16], 100b[15:13] */
#define WLAN_TX_MIQ_DEVICE_ID		5	/*  0b[16], 101b[15:13] */
#define WLAN_TX_LOQ_DEVICE_ID		6	/*  0b[16], 110b[15:13] */
#define WLAN_TX_EXQ_DEVICE_ID		3	/*  0b[16], 011b[15:13] */
#define WLAN_RX0FF_DEVICE_ID			7	/*  0b[16], 111b[15:13] */
#define WLAN_IOREG_DEVICE_ID			8	/*  1b[16] */

/* SDIO Tx Free Page Index */
#define HI_QUEUE_IDX				0
#define MID_QUEUE_IDX				1
#define LOW_QUEUE_IDX				2
#define PUBLIC_QUEUE_IDX			3

#define SDIO_MAX_TX_QUEUE			3		/*  HIQ, MIQ and LOQ */
#define SDIO_MAX_RX_QUEUE			1

#define SDIO_REG_TX_CTRL			0x0000 /*  SDIO Tx Control */
#define SDIO_REG_HIMR				0x0014 /*  SDIO Host Interrupt Mask */
#define SDIO_REG_HISR				0x0018 /*  SDIO Host Interrupt Service Routine */
#define SDIO_REG_HCPWM			0x0019 /*  HCI Current Power Mode */
#define SDIO_REG_RX0_REQ_LEN		0x001C /*  RXDMA Request Length */
#define SDIO_REG_OQT_FREE_PG		0x001E /*  OQT Free Page */
#define SDIO_REG_FREE_TXPG			0x0020 /*  Free Tx Buffer Page */
#define SDIO_REG_HCPWM1			0x0024 /*  HCI Current Power Mode 1 */
#define SDIO_REG_HCPWM2			0x0026 /*  HCI Current Power Mode 2 */
#define SDIO_REG_FREE_TXPG_SEQ	0x0028 /*  Free Tx Page Sequence */
#define SDIO_REG_HTSFR_INFO		0x0030 /*  HTSF Informaion */
#define SDIO_REG_HRPWM1			0x0080 /*  HCI Request Power Mode 1 */
#define SDIO_REG_HRPWM2			0x0082 /*  HCI Request Power Mode 2 */
#define SDIO_REG_HPS_CLKR			0x0084 /*  HCI Power Save Clock */
#define SDIO_REG_HSUS_CTRL			0x0086 /*  SDIO HCI Suspend Control */
#define SDIO_REG_HIMR_ON			0x0090 /* SDIO Host Extension Interrupt Mask Always */
#define SDIO_REG_HISR_ON			0x0091 /* SDIO Host Extension Interrupt Status Always */

#define SDIO_HIMR_DISABLED			0

/*  RTL8723/RTL8188E SDIO Host Interrupt Mask Register */
#define SDIO_HIMR_RX_REQUEST_MSK		BIT0
#define SDIO_HIMR_AVAL_MSK			BIT1
#define SDIO_HIMR_TXERR_MSK			BIT2
#define SDIO_HIMR_RXERR_MSK			BIT3
#define SDIO_HIMR_TXFOVW_MSK			BIT4
#define SDIO_HIMR_RXFOVW_MSK			BIT5
#define SDIO_HIMR_TXBCNOK_MSK			BIT6
#define SDIO_HIMR_TXBCNERR_MSK		BIT7
#define SDIO_HIMR_BCNERLY_INT_MSK		BIT16
#define SDIO_HIMR_C2HCMD_MSK			BIT17
#define SDIO_HIMR_CPWM1_MSK			BIT18
#define SDIO_HIMR_CPWM2_MSK			BIT19
#define SDIO_HIMR_HSISR_IND_MSK		BIT20
#define SDIO_HIMR_GTINT3_IND_MSK		BIT21
#define SDIO_HIMR_GTINT4_IND_MSK		BIT22
#define SDIO_HIMR_PSTIMEOUT_MSK		BIT23
#define SDIO_HIMR_OCPINT_MSK			BIT24
#define SDIO_HIMR_ATIMEND_MSK			BIT25
#define SDIO_HIMR_ATIMEND_E_MSK		BIT26
#define SDIO_HIMR_CTWEND_MSK			BIT27

/*  SDIO Host Interrupt Service Routine */
#define SDIO_HISR_RX_REQUEST			BIT0
#define SDIO_HISR_AVAL					BIT1
#define SDIO_HISR_TXERR					BIT2
#define SDIO_HISR_RXERR					BIT3
#define SDIO_HISR_TXFOVW				BIT4
#define SDIO_HISR_RXFOVW				BIT5
#define SDIO_HISR_TXBCNOK				BIT6
#define SDIO_HISR_TXBCNERR				BIT7
#define SDIO_HISR_BCNERLY_INT			BIT16
#define SDIO_HISR_C2HCMD				BIT17
#define SDIO_HISR_CPWM1				BIT18
#define SDIO_HISR_CPWM2				BIT19
#define SDIO_HISR_HSISR_IND			BIT20
#define SDIO_HISR_GTINT3_IND			BIT21
#define SDIO_HISR_GTINT4_IND			BIT22
#define SDIO_HISR_PSTIMEOUT			BIT23
#define SDIO_HISR_OCPINT				BIT24
#define SDIO_HISR_ATIMEND				BIT25
#define SDIO_HISR_ATIMEND_E			BIT26
#define SDIO_HISR_CTWEND				BIT27

#define MASK_SDIO_HISR_CLEAR		(SDIO_HISR_TXERR |\
									SDIO_HISR_RXERR |\
									SDIO_HISR_TXFOVW |\
									SDIO_HISR_RXFOVW |\
									SDIO_HISR_TXBCNOK |\
									SDIO_HISR_TXBCNERR |\
									SDIO_HISR_C2HCMD |\
									SDIO_HISR_CPWM1 |\
									SDIO_HISR_CPWM2 |\
									SDIO_HISR_HSISR_IND |\
									SDIO_HISR_GTINT3_IND |\
									SDIO_HISR_GTINT4_IND |\
									SDIO_HISR_PSTIMEOUT |\
									SDIO_HISR_OCPINT)

/*  SDIO HCI Suspend Control Register */
#define HCI_RESUME_PWR_RDY			BIT1
#define HCI_SUS_CTRL					BIT0

/*  SDIO Tx FIFO related */
#define SDIO_TX_FREE_PG_QUEUE			4	/*  The number of Tx FIFO free page */
#define SDIO_TX_FIFO_PAGE_SZ			128

#define MAX_TX_AGG_PACKET_NUMBER	0x8

/*  */
/*  */
/* 	0xFE00h ~ 0xFE55h	USB Configuration */
/*  */
/*  */

/* 2 USB Information (0xFE17) */
#define USB_IS_HIGH_SPEED			0
#define USB_IS_FULL_SPEED			1
#define USB_SPEED_MASK				BIT(5)

#define USB_NORMAL_SIE_EP_MASK	0xF
#define USB_NORMAL_SIE_EP_SHIFT	4

/* 2 Special Option */
#define USB_AGG_EN				BIT(3)

/*  0; Use interrupt endpoint to upload interrupt pkt */
/*  1; Use bulk endpoint to upload interrupt pkt, */
#define INT_BULK_SEL			BIT(4)

/* 2REG_C2HEVT_CLEAR */
#define C2H_EVT_HOST_CLOSE		0x00	/*  Set by driver and notify FW that the driver has read the C2H command message */
#define C2H_EVT_FW_CLOSE		0xFF	/*  Set by FW indicating that FW had set the C2H command message and it's not yet read by driver. */


/* 2REG_MULTI_FUNC_CTRL(For RTL8723 Only) */
#define WL_HWPDN_EN			BIT0	/*  Enable GPIO[9] as WiFi HW PDn source */
#define WL_HWPDN_SL			BIT1	/*  WiFi HW PDn polarity control */
#define WL_FUNC_EN				BIT2	/*  WiFi function enable */
#define WL_HWROF_EN			BIT3	/*  Enable GPIO[9] as WiFi RF HW PDn source */
#define BT_HWPDN_EN			BIT16	/*  Enable GPIO[11] as BT HW PDn source */
#define BT_HWPDN_SL			BIT17	/*  BT HW PDn polarity control */
#define BT_FUNC_EN				BIT18	/*  BT function enable */
#define BT_HWROF_EN			BIT19	/*  Enable GPIO[11] as BT/GPS RF HW PDn source */
#define GPS_HWPDN_EN			BIT20	/*  Enable GPIO[10] as GPS HW PDn source */
#define GPS_HWPDN_SL			BIT21	/*  GPS HW PDn polarity control */
#define GPS_FUNC_EN			BIT22	/*  GPS function enable */

/*  */
/*  General definitions */
/*  */

#define LAST_ENTRY_OF_TX_PKT_BUFFER_8723B		255

#define POLLING_LLT_THRESHOLD				20
#define POLLING_READY_TIMEOUT_COUNT		1000

#endif /* __HAL_COMMON_H__ */