/*
 * Copyright 2016 Boundary Devices, Inc.
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;

#include "imx7d.dtsi"

/ {
	model = "Boundary Devices i.MX7 Nitrogen7 Board";
	compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";

	aliases {
		fb-lcd = &lcdif;
		t-lcd = &t_lcd;
	};

	memory@80000000 {
		reg = <0x80000000 0x40000000>;
	};

	backlight-j9 {
		compatible = "gpio-backlight";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_backlight_j9>;
		gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
		default-on;
	};

	backlight-j20 {
		compatible = "pwm-backlight";
		pwms = <&pwm1 0 5000000 0>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <6>;
		status = "okay";
	};

	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb_otg1_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb_otg2_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_can2_3v3: regulator-can2-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "can2-3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
	};

	reg_vref_1v8: regulator-vref-1v8 {
		compatible = "regulator-fixed";
		regulator-name = "vref-1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
	};

	reg_vref_3v3: regulator-vref-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "vref-3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	reg_wlan: regulator-wlan {
		compatible = "regulator-fixed";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
		clock-names = "slow";
		regulator-name = "reg_wlan";
		startup-delay-us = <70000>;
		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};
};

&adc1 {
	vref-supply = <&reg_vref_1v8>;
	status = "okay";
};

&adc2 {
	vref-supply = <&reg_vref_1v8>;
	status = "okay";
};

&clks {
	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
			  <&clks IMX7D_CLKO2_ROOT_DIV>;
	assigned-clock-parents = <&clks IMX7D_CKIL>;
	assigned-clock-rates = <0>, <32768>;
};

&cpu0 {
	cpu-supply = <&sw1a_reg>;
};

&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet1>;
	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
	assigned-clock-rates = <0>, <100000000>;
	phy-mode = "rgmii";
	phy-handle = <&ethphy0>;
	fsl,magic-packet;
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy0: ethernet-phy@4 {
			reg = <4>;
		};
	};
};

&flexcan2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan2>;
	xceiver-supply = <&reg_can2_3v3>;
	status = "okay";
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	pmic: pfuze3000@8 {
		compatible = "fsl,pfuze3000";
		reg = <0x08>;

		regulators {
			sw1a_reg: sw1a {
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1475000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <6250>;
			};

			/* use sw1c_reg to align with pfuze100/pfuze200 */
			sw1c_reg: sw1b {
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1475000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <6250>;
			};

			sw2_reg: sw2 {
				regulator-min-microvolt = <1500000>;
				regulator-max-microvolt = <1850000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw3a_reg: sw3 {
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <1650000>;
				regulator-boot-on;
				regulator-always-on;
			};

			swbst_reg: swbst {
				regulator-min-microvolt = <5000000>;
				regulator-max-microvolt = <5150000>;
			};

			snvs_reg: vsnvs {
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <3000000>;
				regulator-boot-on;
				regulator-always-on;
			};

			vref_reg: vrefddr {
				regulator-boot-on;
				regulator-always-on;
			};

			vgen1_reg: vldo1 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen2_reg: vldo2 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1550000>;
				regulator-always-on;
			};

			vgen3_reg: vccsd {
				regulator-min-microvolt = <2850000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen4_reg: v33 {
				regulator-min-microvolt = <2850000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen5_reg: vldo3 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen6_reg: vldo4 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};
		};
	};
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";

	rtc@68 {
		compatible = "microcrystal,rv4162";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2c2_rv4162>;
		reg = <0x68>;
		interrupts-extended = <&gpio2 15 IRQ_TYPE_LEVEL_LOW>;
	};
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";

	touch@48 {
		compatible = "ti,tsc2004";
		reg = <0x48>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2c3_tsc2004>;
		interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
		wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
	};
};

&i2c4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c4>;
	status = "okay";

	codec: wm8960@1a {
		compatible = "wlf,wm8960";
		reg = <0x1a>;
		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
		clock-names = "mclk";
		wlf,shared-lrclk;
	};
};

&lcdif {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lcdif_dat
		     &pinctrl_lcdif_ctrl>;
	lcd-supply = <&reg_vref_3v3>;
	display = <&display0>;
	status = "okay";

	display0: lcd-display {
		bits-per-pixel = <16>;
		bus-width = <18>;

		display-timings {
			native-mode = <&t_lcd>;
			t_lcd: t_lcd_default {
				/* default to Okaya display */
				clock-frequency = <30000000>;
				hactive = <800>;
				vactive = <480>;
				hfront-porch = <40>;
				hback-porch = <40>;
				hsync-len = <48>;
				vback-porch = <29>;
				vfront-porch = <13>;
				vsync-len = <3>;
				hsync-active = <0>;
				vsync-active = <0>;
				de-active = <1>;
				pixelclk-active = <0>;
			};
		};
	};
};

&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1>;
	status = "okay";
};

&pwm2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm2>;
	status = "okay";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
	status = "okay";
};

&uart6 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart6>;
	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
	uart-has-rtscts;
	status = "okay";
};

&usbotg1 {
	vbus-supply = <&reg_usb_otg1_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg1>;
	status = "okay";
};

&usbotg2 {
	vbus-supply = <&reg_usb_otg2_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg2>;
	dr_mode = "host";
	status = "okay";
};

&usdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc1>;
	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
	vmmc-supply = <&vgen3_reg>;
	bus-width = <4>;
	fsl,tuning-step = <2>;
	wakeup-source;
	keep-power-in-suspend;
	status = "okay";
};

&usdhc2 {
	#address-cells = <1>;
	#size-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc2>;
	bus-width = <4>;
	non-removable;
	vmmc-supply = <&reg_wlan>;
	cap-power-off-card;
	keep-power-in-suspend;
	status = "okay";

	wlcore: wlcore@2 {
		compatible = "ti,wl1271";
		reg = <2>;
		interrupt-parent = <&gpio4>;
		interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
		ref-clock-frequency = <38400000>;
	};
};

&usdhc3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc3>;
	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
	assigned-clock-rates = <400000000>;
	bus-width = <8>;
	fsl,tuning-step = <2>;
	non-removable;
	status = "okay";
};

&wdog1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_wdog1>;
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;

	pinctrl_hog_1: hoggrp-1 {
		fsl,pins = <
			MX7D_PAD_SD3_RESET_B__GPIO6_IO11	0x5d
			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x7d
			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x7d
		>;
	};

	pinctrl_enet1: enet1grp {
		fsl,pins = <
			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x3
			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x71
			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71
			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71
			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x71
			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x71
			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71
			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x71
			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x11
			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x11
			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x11
			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x71
			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x11
			MX7D_PAD_SD3_STROBE__GPIO6_IO10			0x75
		>;
	};

	pinctrl_flexcan2: flexcan2grp {
		fsl,pins = <
			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x7d
			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x7d
			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x7d
		>;
	};

	pinctrl_i2c1: i2c1grp {
		fsl,pins = <
			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
		>;
	};

	pinctrl_i2c2: i2c2grp {
		fsl,pins = <
			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
		>;
	};

	pinctrl_i2c2_rv4162: i2c2-rv4162grp {
		fsl,pins = <
			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x7d
		>;
	};

	pinctrl_i2c3: i2c3grp {
		fsl,pins = <
			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
		>;
	};

	pinctrl_i2c3_tsc2004: i2c3tsc2004grp {
		fsl,pins = <
			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x79
			MX7D_PAD_SD2_WP__GPIO5_IO10		0x7d
		>;
	};

	pinctrl_i2c4: i2c4grp {
		fsl,pins = <
			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
		>;
	};

	pinctrl_j2: j2grp {
		fsl,pins = <
			MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15	0x7d
			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x7d
			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x7d
			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x7d
			MX7D_PAD_SD1_WP__GPIO5_IO1		0x7d
			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x7d
			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x7d
			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x7d
			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x7d
			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x7d
			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x7d
			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x7d
			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x7d
			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x7d
			MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14	0x7d
			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x7d
			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x7d
			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x7d
			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x7d
			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x7d
			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x7d
			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x7d
			MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22	0x7d
			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x7d
			MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20	0x7d
			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x7d
			MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19	0x7d
			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x7d
			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x7d
			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x7d
			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x7d
			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x7d
			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x7d
			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x7d
			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x7d
		>;
	};

	pinctrl_lcdif_dat: lcdifdatgrp {
		fsl,pins = <
			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
		>;
	};

	pinctrl_lcdif_ctrl: lcdifctrlgrp {
		fsl,pins = <
			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
		>;
	};

	pinctrl_pwm2: pwm2grp {
		fsl,pins = <
			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x7d
		>;
	};

	pinctrl_uart1: uart1grp {
		fsl,pins = <
			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
		>;
	};

	pinctrl_uart2: uart2grp {
		fsl,pins = <
			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
		>;
	};

	pinctrl_uart3: uart3grp {
		fsl,pins = <
			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x7d
		>;
	};

	pinctrl_uart6: uart6grp {
		fsl,pins = <
			MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
			MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
			MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
			MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
		>;
	};

	pinctrl_usbotg2: usbotg2grp {
		fsl,pins = <
			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x7d
			MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
		>;
	};

	pinctrl_usdhc1: usdhc1grp {
		fsl,pins = <
			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x75
			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x75
		>;
	};

	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x59
			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x59
		>;
	};

	pinctrl_usdhc3: usdhc3grp {
		fsl,pins = <
			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
		>;
	};
};

&iomuxc_lpsr {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog_2>;

	pinctrl_hog_2: hoggrp-2 {
		fsl,pins = <
			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x7d
			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
		>;
	};

	pinctrl_backlight_j9: backlightj9grp {
		fsl,pins = <
			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x7d
		>;
	};

	pinctrl_pwm1: pwm1grp {
		fsl,pins = <
			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x7d
		>;
	};

	pinctrl_usbotg1: usbotg1grp {
		fsl,pins = <
			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x7d
			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x14
		>;
	};

	pinctrl_wdog1: wdog1grp {
		fsl,pins = <
			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x75
		>;
	};
};