Merge tags 'dt-for-linus', 'gpio-for-linus' and 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6
Pull devicetree, gpio and spi bugfixes from Grant Likely:
"Device tree v3.8 bug fix:
- Fixes an undefined struct device build error and a missing symbol
export.
GPIO device driver bug fixes:
- gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG
- gpio/ich: Add missing spinlock init
SPI device driver bug fixes:
- Most of this is bug fixes to the core code and the sh-hspi and
s3c64xx device drivers.
- There is also a patch here to add DT support to the Atmel driver.
This one should have been in the first round, but I missed it.
It's a low risk change contained within a single driver and the
Atmel maintainer has requested it."
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux-2.6:
of: define struct device in of_platform.h if !OF_DEVICE and !OF_ADDRESS
of: Fix export of of_find_matching_node_and_match()
* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG
gpio/ich: Add missing spinlock init
* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
spi/sh-hspi: fix return value check in hspi_probe().
spi: fix tegra SPI binding examples
spi/atmel: add DT support
of/spi: Fix SPI module loading by using proper "spi:" modalias prefixes.
spi: Change FIFO flush operation and spi channel off
spi: Keep chipselect assertion during one message
diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy
index 9869466..ec0a38e 100644
--- a/Documentation/ABI/testing/ima_policy
+++ b/Documentation/ABI/testing/ima_policy
@@ -23,7 +23,7 @@
lsm: [[subj_user=] [subj_role=] [subj_type=]
[obj_user=] [obj_role=] [obj_type=]]
- base: func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
+ base: func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK][MODULE_CHECK]
mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
fsmagic:= hex value
uid:= decimal value
@@ -53,6 +53,7 @@
measure func=BPRM_CHECK
measure func=FILE_MMAP mask=MAY_EXEC
measure func=FILE_CHECK mask=MAY_READ uid=0
+ measure func=MODULE_CHECK uid=0
appraise fowner=0
The default policy measures all executables in bprm_check,
diff --git a/Documentation/devicetree/bindings/arm/davinci/nand.txt b/Documentation/devicetree/bindings/arm/davinci/nand.txt
index 49fc7ad..3545ea7 100644
--- a/Documentation/devicetree/bindings/arm/davinci/nand.txt
+++ b/Documentation/devicetree/bindings/arm/davinci/nand.txt
@@ -23,6 +23,9 @@
- ti,davinci-nand-buswidth: buswidth 8 or 16
- ti,davinci-nand-use-bbt: use flash based bad block table support.
+nand device bindings may contain additional sub-nodes describing
+partitions of the address space. See partition.txt for more detail.
+
Example(da850 EVM ):
nand_cs3@62000000 {
compatible = "ti,davinci-nand";
@@ -35,4 +38,9 @@
ti,davinci-ecc-mode = "hw";
ti,davinci-ecc-bits = <4>;
ti,davinci-nand-use-bbt;
+
+ partition@180000 {
+ label = "ubifs";
+ reg = <0x180000 0x7e80000>;
+ };
};
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
new file mode 100644
index 0000000..b04d03a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt
@@ -0,0 +1,23 @@
+* Denali NAND controller
+
+Required properties:
+ - compatible : should be "denali,denali-nand-dt"
+ - reg : should contain registers location and length for data and reg.
+ - reg-names: Should contain the reg names "nand_data" and "denali_reg"
+ - interrupts : The interrupt number.
+ - dm-mask : DMA bit mask
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Examples:
+
+nand: nand@ff900000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "denali,denali-nand-dt";
+ reg = <0xff900000 0x100000>, <0xffb80000 0x10000>;
+ reg-names = "nand_data", "denali_reg";
+ interrupts = <0 144 4>;
+ dma-mask = <0xffffffff>;
+};
diff --git a/Documentation/devicetree/bindings/mtd/flctl-nand.txt b/Documentation/devicetree/bindings/mtd/flctl-nand.txt
new file mode 100644
index 0000000..427f46d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/flctl-nand.txt
@@ -0,0 +1,49 @@
+FLCTL NAND controller
+
+Required properties:
+- compatible : "renesas,shmobile-flctl-sh7372"
+- reg : Address range of the FLCTL
+- interrupts : flste IRQ number
+- nand-bus-width : bus width to NAND chip
+
+Optional properties:
+- dmas: DMA specifier(s)
+- dma-names: name for each DMA specifier. Valid names are
+ "data_tx", "data_rx", "ecc_tx", "ecc_rx"
+
+The DMA fields are not used yet in the driver but are listed here for
+completing the bindings.
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Example:
+
+ flctl@e6a30000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "renesas,shmobile-flctl-sh7372";
+ reg = <0xe6a30000 0x100>;
+ interrupts = <0x0d80>;
+
+ nand-bus-width = <16>;
+
+ dmas = <&dmac 1 /* data_tx */
+ &dmac 2;> /* data_rx */
+ dma-names = "data_tx", "data_rx";
+
+ system@0 {
+ label = "system";
+ reg = <0x0 0x8000000>;
+ };
+
+ userdata@8000000 {
+ label = "userdata";
+ reg = <0x8000000 0x10000000>;
+ };
+
+ cache@18000000 {
+ label = "cache";
+ reg = <0x18000000 0x8000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index e2c663b..e3ea32e 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -3,9 +3,7 @@
Required properties:
- compatible : "st,spear600-fsmc-nand"
- reg : Address range of the mtd chip
-- reg-names: Should contain the reg names "fsmc_regs" and "nand_data"
-- st,ale-off : Chip specific offset to ALE
-- st,cle-off : Chip specific offset to CLE
+- reg-names: Should contain the reg names "fsmc_regs", "nand_data", "nand_addr" and "nand_cmd"
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
@@ -19,10 +17,10 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0xd1800000 0x1000 /* FSMC Register */
- 0xd2000000 0x4000>; /* NAND Base */
- reg-names = "fsmc_regs", "nand_data";
- st,ale-off = <0x20000>;
- st,cle-off = <0x10000>;
+ 0xd2000000 0x0010 /* NAND Base DATA */
+ 0xd2020000 0x0010 /* NAND Base ADDR */
+ 0xd2010000 0x0010>; /* NAND Base CMD */
+ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
bank-width = <1>;
nand-skip-bbtscan;
diff --git a/Documentation/devicetree/bindings/mtd/m25p80.txt b/Documentation/devicetree/bindings/mtd/m25p80.txt
new file mode 100644
index 0000000..6d3d576
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/m25p80.txt
@@ -0,0 +1,29 @@
+* MTD SPI driver for ST M25Pxx (and similar) serial flash chips
+
+Required properties:
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+ representing partitions.
+- compatible : Should be the manufacturer and the name of the chip. Bear in mind
+ the DT binding is not Linux-only, but in case of Linux, see the
+ "m25p_ids" table in drivers/mtd/devices/m25p80.c for the list of
+ supported chips.
+- reg : Chip-Select number
+- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
+
+Optional properties:
+- m25p,fast-read : Use the "fast read" opcode to read data from the chip instead
+ of the usual "read" opcode. This opcode is not supported by
+ all chips and support for it can not be detected at runtime.
+ Refer to your chips' datasheet to check if this is supported
+ by your chip.
+
+Example:
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ m25p,fast-read;
+ };
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
index 94de19b..dab7847 100644
--- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
@@ -23,6 +23,9 @@
unaligned accesses as implemented in the JFFS2 code via memcpy().
By defining "no-unaligned-direct-access", the flash will not be
exposed directly to the MTD users (e.g. JFFS2) any more.
+ - linux,mtd-name: allow to specify the mtd name for retro capability with
+ physmap-flash drivers as boot loader pass the mtd partition via the old
+ device name physmap-flash.
For JEDEC compatible devices, the following additional properties
are defined:
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
new file mode 100644
index 0000000..131e8c11
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -0,0 +1,23 @@
+TI SOC ECAP based APWM controller
+
+Required properties:
+- compatible: Must be "ti,am33xx-ecap"
+- #pwm-cells: Should be 3. Number of cells being used to specify PWM property.
+ First cell specifies the per-chip index of the PWM to use, the second
+ cell is the period in nanoseconds and bit 0 in the third cell is used to
+ encode the polarity of PWM output. Set bit 0 of the third in PWM specifier
+ to 1 for inverse polarity & set to 0 for normal polarity.
+- reg: physical base address and size of the registers map.
+
+Optional properties:
+- ti,hwmods: Name of the hwmod associated to the ECAP:
+ "ecap<x>", <x> being the 0-based instance number from the HW spec
+
+Example:
+
+ecap0: ecap@0 {
+ compatible = "ti,am33xx-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48300100 0x80>;
+ ti,hwmods = "ecap0";
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
new file mode 100644
index 0000000..4fc7079
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -0,0 +1,23 @@
+TI SOC EHRPWM based PWM controller
+
+Required properties:
+- compatible : Must be "ti,am33xx-ehrpwm"
+- #pwm-cells: Should be 3. Number of cells being used to specify PWM property.
+ First cell specifies the per-chip index of the PWM to use, the second
+ cell is the period in nanoseconds and bit 0 in the third cell is used to
+ encode the polarity of PWM output. Set bit 0 of the third in PWM specifier
+ to 1 for inverse polarity & set to 0 for normal polarity.
+- reg: physical base address and size of the registers map.
+
+Optional properties:
+- ti,hwmods: Name of the hwmod associated to the EHRPWM:
+ "ehrpwm<x>", <x> being the 0-based instance number from the HW spec
+
+Example:
+
+ehrpwm0: ehrpwm@0 {
+ compatible = "ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48300200 0x100>;
+ ti,hwmods = "ehrpwm0";
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
new file mode 100644
index 0000000..f7eae77
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
@@ -0,0 +1,31 @@
+TI SOC based PWM Subsystem
+
+Required properties:
+- compatible: Must be "ti,am33xx-pwmss";
+- reg: physical base address and size of the registers map.
+- address-cells: Specify the number of u32 entries needed in child nodes.
+ Should set to 1.
+- size-cells: specify number of u32 entries needed to specify child nodes size
+ in reg property. Should set to 1.
+- ranges: describes the address mapping of a memory-mapped bus. Should set to
+ physical address map of child's base address, physical address within
+ parent's address space and length of the address map. For am33xx,
+ 3 set of child register maps present, ECAP register space, EQEP
+ register space, EHRPWM register space.
+
+Also child nodes should also populated under PWMSS DT node.
+
+Example:
+pwmss0: pwmss@48300000 {
+ compatible = "ti,am33xx-pwmss";
+ reg = <0x48300000 0x10>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges = <0x48300100 0x48300100 0x80 /* ECAP */
+ 0x48300180 0x48300180 0x80 /* EQEP */
+ 0x48300200 0x48300200 0x80>; /* EHRPWM */
+
+ /* child nodes go here */
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm.txt b/Documentation/devicetree/bindings/pwm/pwm.txt
index 73ec962..06e6724 100644
--- a/Documentation/devicetree/bindings/pwm/pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm.txt
@@ -37,10 +37,21 @@
pwm-names = "backlight";
};
+Note that in the example above, specifying the "pwm-names" is redundant
+because the name "backlight" would be used as fallback anyway.
+
pwm-specifier typically encodes the chip-relative PWM number and the PWM
-period in nanoseconds. Note that in the example above, specifying the
-"pwm-names" is redundant because the name "backlight" would be used as
-fallback anyway.
+period in nanoseconds.
+
+Optionally, the pwm-specifier can encode a number of flags in a third cell:
+- bit 0: PWM signal polarity (0: normal polarity, 1: inverse polarity)
+
+Example with optional PWM specifier for inverse polarity
+
+ bl: backlight {
+ pwms = <&pwm 0 5000000 1>;
+ pwm-names = "backlight";
+ };
2) PWM controller nodes
-----------------------
diff --git a/Documentation/devicetree/bindings/pwm/spear-pwm.txt b/Documentation/devicetree/bindings/pwm/spear-pwm.txt
new file mode 100644
index 0000000..3ac779d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/spear-pwm.txt
@@ -0,0 +1,18 @@
+== ST SPEAr SoC PWM controller ==
+
+Required properties:
+- compatible: should be one of:
+ - "st,spear320-pwm"
+ - "st,spear1340-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: number of cells used to specify PWM which is fixed to 2 on
+ SPEAr. The first cell specifies the per-chip index of the PWM to use and
+ the second cell is the period in nanoseconds.
+
+Example:
+
+ pwm: pwm@a8000000 {
+ compatible ="st,spear320-pwm";
+ reg = <0xa8000000 0x1000>;
+ #pwm-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt
new file mode 100644
index 0000000..2943ee5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt
@@ -0,0 +1,17 @@
+Texas Instruments TWL series PWM drivers
+
+Supported PWMs:
+On TWL4030 series: PWM1 and PWM2
+On TWL6030 series: PWM0 and PWM1
+
+Required properties:
+- compatible: "ti,twl4030-pwm" or "ti,twl6030-pwm"
+- #pwm-cells: should be 2. The first cell specifies the per-chip index
+ of the PWM to use and the second cell is the period in nanoseconds.
+
+Example:
+
+twl_pwm: pwm {
+ compatible = "ti,twl6030-pwm";
+ #pwm-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt
new file mode 100644
index 0000000..cb64f3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt
@@ -0,0 +1,17 @@
+Texas Instruments TWL series PWM drivers connected to LED terminals
+
+Supported PWMs:
+On TWL4030 series: PWMA and PWMB (connected to LEDA and LEDB terminals)
+On TWL6030 series: LED PWM (mainly used as charging indicator LED)
+
+Required properties:
+- compatible: "ti,twl4030-pwmled" or "ti,twl6030-pwmled"
+- #pwm-cells: should be 2. The first cell specifies the per-chip index
+ of the PWM to use and the second cell is the period in nanoseconds.
+
+Example:
+
+twl_pwmled: pwmled {
+ compatible = "ti,twl6030-pwmled";
+ #pwm-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
new file mode 100644
index 0000000..bcc63678
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
@@ -0,0 +1,17 @@
+VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
+
+Required properties:
+- compatible: should be "via,vt8500-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2. The first cell specifies the per-chip index
+ of the PWM to use and the second cell is the period in nanoseconds.
+- clocks: phandle to the PWM source clock
+
+Example:
+
+pwm1: pwm@d8220000 {
+ #pwm-cells = <2>;
+ compatible = "via,vt8500-pwm";
+ reg = <0xd8220000 0x1000>;
+ clocks = <&clkpwm>;
+};
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
index 8cf24f6..7b53da5 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
@@ -13,7 +13,7 @@
Example:
-spi@7000d600 {
+spi@7000c380 {
compatible = "nvidia,tegra20-sflash";
reg = <0x7000c380 0x80>;
interrupts = <0 39 0x04>;
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
index f5b1ad1..eefe15e 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
@@ -13,7 +13,7 @@
Example:
-slink@7000d600 {
+spi@7000d600 {
compatible = "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
interrupts = <0 82 0x04>;
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
new file mode 100644
index 0000000..07e04cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
@@ -0,0 +1,26 @@
+Atmel SPI device
+
+Required properties:
+- compatible : should be "atmel,at91rm9200-spi".
+- reg: Address and length of the register set for the device
+- interrupts: Should contain spi interrupt
+- cs-gpios: chipselects
+
+Example:
+
+spi1: spi@fffcc000 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffcc000 0x4000>;
+ interrupts = <13 4 5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&pioB 3 0>;
+ status = "okay";
+
+ mmc-slot@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ gpios = <&pioC 4 0>; /* CD */
+ spi-max-frequency = <25000000>;
+ };
+};
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index f15cb74..406d82d 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -373,7 +373,7 @@
1 Loadlin
2 bootsect-loader (0x20, all other values reserved)
3 Syslinux
- 4 Etherboot/gPXE
+ 4 Etherboot/gPXE/iPXE
5 ELILO
7 GRUB
8 U-Boot
@@ -381,6 +381,7 @@
A Gujin
B Qemu
C Arcturus Networks uCbootloader
+ D kexec-tools
E Extended (see ext_loader_type)
F Special (0xFF = undefined)
10 Reserved
diff --git a/Documentation/xtensa/atomctl.txt b/Documentation/xtensa/atomctl.txt
new file mode 100644
index 0000000..10a8d1f
--- /dev/null
+++ b/Documentation/xtensa/atomctl.txt
@@ -0,0 +1,44 @@
+We Have Atomic Operation Control (ATOMCTL) Register.
+This register determines the effect of using a S32C1I instruction
+with various combinations of:
+
+ 1. With and without an Coherent Cache Controller which
+ can do Atomic Transactions to the memory internally.
+
+ 2. With and without An Intelligent Memory Controller which
+ can do Atomic Transactions itself.
+
+The Core comes up with a default value of for the three types of cache ops:
+
+ 0x28: (WB: Internal, WT: Internal, BY:Exception)
+
+On the FPGA Cards we typically simulate an Intelligent Memory controller
+which can implement RCW transactions. For FPGA cards with an External
+Memory controller we let it to the atomic operations internally while
+doing a Cached (WB) transaction and use the Memory RCW for un-cached
+operations.
+
+For systems without an coherent cache controller, non-MX, we always
+use the memory controllers RCW, thought non-MX controlers likely
+support the Internal Operation.
+
+CUSTOMER-WARNING:
+ Virtually all customers buy their memory controllers from vendors that
+ don't support atomic RCW memory transactions and will likely want to
+ configure this register to not use RCW.
+
+Developers might find using RCW in Bypass mode convenient when testing
+with the cache being bypassed; for example studying cache alias problems.
+
+See Section 4.3.12.4 of ISA; Bits:
+
+ WB WT BY
+ 5 4 | 3 2 | 1 0
+ 2 Bit
+ Field
+ Values WB - Write Back WT - Write Thru BY - Bypass
+--------- --------------- ----------------- ----------------
+ 0 Exception Exception Exception
+ 1 RCW Transaction RCW Transaction RCW Transaction
+ 2 Internal Operation Exception Reserved
+ 3 Reserved Reserved Reserved
diff --git a/Makefile b/Makefile
index 540f7b2..6f07f4a 100644
--- a/Makefile
+++ b/Makefile
@@ -981,6 +981,12 @@
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
$(call cmd,depmod)
+ifeq ($(CONFIG_MODULE_SIG), y)
+PHONY += modules_sign
+modules_sign:
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign
+endif
+
else # CONFIG_MODULES
# Modules not configured
diff --git a/arch/Kconfig b/arch/Kconfig
index 54ffd0f..8e9e324 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -113,6 +113,25 @@
See Documentation/unaligned-memory-access.txt for more
information on the topic of unaligned memory accesses.
+config ARCH_USE_BUILTIN_BSWAP
+ bool
+ help
+ Modern versions of GCC (since 4.4) have builtin functions
+ for handling byte-swapping. Using these, instead of the old
+ inline assembler that the architecture code provides in the
+ __arch_bswapXX() macros, allows the compiler to see what's
+ happening and offers more opportunity for optimisation. In
+ particular, the compiler will be able to combine the byteswap
+ with a nearby load or store and use load-and-swap or
+ store-and-swap instructions if the architecture has them. It
+ should almost *never* result in code which is worse than the
+ hand-coded assembler in <asm/swab.h>. But just in case it
+ does, the use of the builtins is optional.
+
+ Any architecture with load-and-swap or store-and-swap
+ instructions should set this. And it shouldn't hurt to set it
+ on architectures that don't have such instructions.
+
config HAVE_SYSCALL_WRAPPERS
bool
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 009096d..b4ca60f 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -73,7 +73,7 @@
400000
500000
600000 >;
- status = "disable";
+ status = "disabled";
};
ahb {
@@ -118,15 +118,15 @@
compatible = "st,spear600-fsmc-nand";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0xb0000000 0x1000 /* FSMC Register */
- 0xb0800000 0x0010>; /* NAND Base */
- reg-names = "fsmc_regs", "nand_data";
+ reg = <0xb0000000 0x1000 /* FSMC Register*/
+ 0xb0800000 0x0010 /* NAND Base DATA */
+ 0xb0820000 0x0010 /* NAND Base ADDR */
+ 0xb0810000 0x0010>; /* NAND Base CMD */
+ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
interrupts = <0 20 0x4
0 21 0x4
0 22 0x4
0 23 0x4>;
- st,ale-off = <0x20000>;
- st,cle-off = <0x10000>;
st,mode = <2>;
status = "disabled";
};
@@ -144,7 +144,7 @@
compatible = "st,pcm-audio";
#address-cells = <0>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
smi: flash@ea000000 {
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index 090adc6..f79b3df 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -38,10 +38,10 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0x94000000 0x1000 /* FSMC Register */
- 0x80000000 0x0010>; /* NAND Base */
- reg-names = "fsmc_regs", "nand_data";
- st,ale-off = <0x20000>;
- st,cle-off = <0x10000>;
+ 0x80000000 0x0010 /* NAND Base DATA */
+ 0x80020000 0x0010 /* NAND Base ADDR */
+ 0x80010000 0x0010>; /* NAND Base CMD */
+ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index e814e5e9..ab45b8c 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -33,10 +33,10 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0x44000000 0x1000 /* FSMC Register */
- 0x40000000 0x0010>; /* NAND Base */
- reg-names = "fsmc_regs", "nand_data";
- st,ale-off = <0x10000>;
- st,cle-off = <0x20000>;
+ 0x40000000 0x0010 /* NAND Base DATA */
+ 0x40020000 0x0010 /* NAND Base ADDR */
+ 0x40010000 0x0010>; /* NAND Base CMD */
+ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index c056a84..caa5520 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -40,10 +40,10 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0x4c000000 0x1000 /* FSMC Register */
- 0x50000000 0x0010>; /* NAND Base */
- reg-names = "fsmc_regs", "nand_data";
- st,ale-off = <0x20000>;
- st,cle-off = <0x10000>;
+ 0x50000000 0x0010 /* NAND Base DATA */
+ 0x50020000 0x0010 /* NAND Base ADDR */
+ 0x50010000 0x0010>; /* NAND Base CMD */
+ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index e051dde..19f99dc 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -76,10 +76,10 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0xd1800000 0x1000 /* FSMC Register */
- 0xd2000000 0x4000>; /* NAND Base */
- reg-names = "fsmc_regs", "nand_data";
- st,ale-off = <0x20000>;
- st,cle-off = <0x10000>;
+ 0xd2000000 0x0010 /* NAND Base DATA */
+ 0xd2020000 0x0010 /* NAND Base ADDR */
+ 0xd2010000 0x0010>; /* NAND Base CMD */
+ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
status = "disabled";
};
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 240b25e..86cfd29 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -57,7 +57,7 @@
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND_NOMADIK=y
+CONFIG_MTD_NAND_FSMC=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h
index ac03bdb..4da7cde7 100644
--- a/arch/arm/include/uapi/asm/unistd.h
+++ b/arch/arm/include/uapi/asm/unistd.h
@@ -405,6 +405,7 @@
#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376)
#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377)
/* 378 for kcmp */
+#define __NR_finit_module (__NR_SYSCALL_BASE+379)
/*
* This may need to be greater than __NR_last_syscall+1 in order to
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 5935b6a02..a4fda4e 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -388,6 +388,7 @@
CALL(sys_process_vm_readv)
CALL(sys_process_vm_writev)
CALL(sys_ni_syscall) /* reserved for sys_kcmp */
+ CALL(sys_finit_module)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 5ccdf53..98167a4 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
+#include <linux/mtd/fsmc.h>
#include <linux/mtd/onenand.h>
#include <linux/mtd/partitions.h>
#include <linux/i2c.h>
@@ -33,7 +34,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
-#include <mach/fsmc.h>
#include <mach/irqs.h>
#include "cpu-8815.h"
@@ -42,39 +42,34 @@
#define SRC_CR_INIT_MASK 0x00007fff
#define SRC_CR_INIT_VAL 0x2aaa8000
+#define ALE_OFF 0x1000000
+#define CLE_OFF 0x800000
+
/* These addresses span 16MB, so use three individual pages */
static struct resource nhk8815_nand_resources[] = {
{
+ .name = "nand_data",
+ .start = 0x40000000,
+ .end = 0x40000000 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
.name = "nand_addr",
- .start = NAND_IO_ADDR,
- .end = NAND_IO_ADDR + 0xfff,
+ .start = 0x40000000 + ALE_OFF,
+ .end = 0x40000000 +ALE_OFF + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.name = "nand_cmd",
- .start = NAND_IO_CMD,
- .end = NAND_IO_CMD + 0xfff,
+ .start = 0x40000000 + CLE_OFF,
+ .end = 0x40000000 + CLE_OFF + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
- .name = "nand_data",
- .start = NAND_IO_DATA,
- .end = NAND_IO_DATA + 0xfff,
+ .name = "fsmc_regs",
+ .start = NOMADIK_FSMC_BASE,
+ .end = NOMADIK_FSMC_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
- }
+ },
};
-static int nhk8815_nand_init(void)
-{
- /* FSMC setup for nand chip select (8-bit nand in 8815NHK) */
- writel(0x0000000E, FSMC_PCR(0));
- writel(0x000D0A00, FSMC_PMEM(0));
- writel(0x00100A00, FSMC_PATT(0));
-
- /* enable access to the chip select area */
- writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0));
-
- return 0;
-}
-
/*
* These partitions are the same as those used in the 2.6.20 release
* shipped by the vendor; the first two partitions are mandated
@@ -108,20 +103,28 @@
}
};
-static struct nomadik_nand_platform_data nhk8815_nand_data = {
- .parts = nhk8815_partitions,
- .nparts = ARRAY_SIZE(nhk8815_partitions),
- .options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING,
- .init = nhk8815_nand_init,
+static struct fsmc_nand_timings nhk8815_nand_timings = {
+ .thiz = 0,
+ .thold = 0x10,
+ .twait = 0x0A,
+ .tset = 0,
+};
+
+static struct fsmc_nand_platform_data nhk8815_nand_platform_data = {
+ .nand_timings = &nhk8815_nand_timings,
+ .partitions = nhk8815_partitions,
+ .nr_partitions = ARRAY_SIZE(nhk8815_partitions),
+ .width = FSMC_NAND_BW8,
};
static struct platform_device nhk8815_nand_device = {
- .name = "nomadik_nand",
- .dev = {
- .platform_data = &nhk8815_nand_data,
+ .name = "fsmc-nand",
+ .id = -1,
+ .resource = nhk8815_nand_resources,
+ .num_resources = ARRAY_SIZE(nhk8815_nand_resources),
+ .dev = {
+ .platform_data = &nhk8815_nand_platform_data,
},
- .resource = nhk8815_nand_resources,
- .num_resources = ARRAY_SIZE(nhk8815_nand_resources),
};
/* These are the partitions for the OneNand device, different from above */
@@ -176,6 +179,10 @@
.num_resources = ARRAY_SIZE(nhk8815_onenand_resource),
};
+/* bus control reg. and bus timing reg. for CS0..CS3 */
+#define FSMC_BCR(x) (NOMADIK_FSMC_VA + (x << 3))
+#define FSMC_BTR(x) (NOMADIK_FSMC_VA + (x << 3) + 0x04)
+
static void __init nhk8815_onenand_init(void)
{
#ifdef CONFIG_MTD_ONENAND
diff --git a/arch/arm/mach-nomadik/include/mach/fsmc.h b/arch/arm/mach-nomadik/include/mach/fsmc.h
deleted file mode 100644
index 8c2c051..0000000
--- a/arch/arm/mach-nomadik/include/mach/fsmc.h
+++ /dev/null
@@ -1,29 +0,0 @@
-
-/* Definitions for the Nomadik FSMC "Flexible Static Memory controller" */
-
-#ifndef __ASM_ARCH_FSMC_H
-#define __ASM_ARCH_FSMC_H
-
-#include <mach/hardware.h>
-/*
- * Register list
- */
-
-/* bus control reg. and bus timing reg. for CS0..CS3 */
-#define FSMC_BCR(x) (NOMADIK_FSMC_VA + (x << 3))
-#define FSMC_BTR(x) (NOMADIK_FSMC_VA + (x << 3) + 0x04)
-
-/* PC-card and NAND:
- * PCR = control register
- * PMEM = memory timing
- * PATT = attribute timing
- * PIO = I/O timing
- * PECCR = ECC result
- */
-#define FSMC_PCR(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x00)
-#define FSMC_PMEM(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x08)
-#define FSMC_PATT(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x0c)
-#define FSMC_PIO(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x10)
-#define FSMC_PECCR(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x14)
-
-#endif /* __ASM_ARCH_FSMC_H */
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 60529e0..cf07e28 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -256,6 +256,11 @@
},
};
+static struct platform_device rx51_battery_device = {
+ .name = "rx51-battery",
+ .id = -1,
+};
+
static void rx51_charger_set_power(bool on)
{
gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on);
@@ -277,6 +282,7 @@
WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
+ platform_device_register(&rx51_battery_device);
platform_device_register(&rx51_charger_device);
}
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 12f3994..8b204ae6 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -250,6 +250,18 @@
*/
static struct resource fsmc_resources[] = {
{
+ .name = "nand_addr",
+ .start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE,
+ .end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "nand_cmd",
+ .start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE,
+ .end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
.name = "nand_data",
.start = U300_NAND_CS0_PHYS_BASE,
.end = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1,
@@ -1492,8 +1504,6 @@
.nr_partitions = ARRAY_SIZE(u300_partitions),
.options = NAND_SKIP_BBTSCAN,
.width = FSMC_NAND_BW8,
- .ale_off = PLAT_NAND_ALE,
- .cle_off = PLAT_NAND_CLE,
};
static struct platform_device nand_device = {
diff --git a/arch/cris/kernel/module.c b/arch/cris/kernel/module.c
index 37400f5..51123f9 100644
--- a/arch/cris/kernel/module.c
+++ b/arch/cris/kernel/module.c
@@ -32,8 +32,6 @@
#ifdef CONFIG_ETRAX_KMALLOCED_MODULES
void *module_alloc(unsigned long size)
{
- if (size == 0)
- return NULL;
return kmalloc(size, GFP_KERNEL);
}
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index 5e34ccf..2a625fb 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -214,8 +214,6 @@
void *module_alloc(unsigned long size)
{
- if (size == 0)
- return NULL;
/* using RWX means less protection for modules, but it's
* easier than trying to map the text, data, init_text and
* init_data correctly */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index cec8aae..97909d3b 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -356,3 +356,4 @@
SYSCALL_SPU(setns)
COMPAT_SYS(process_vm_readv)
COMPAT_SYS(process_vm_writev)
+SYSCALL(finit_module)
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index bcbbe41..29365e1 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -12,7 +12,7 @@
#include <uapi/asm/unistd.h>
-#define __NR_syscalls 353
+#define __NR_syscalls 354
#define __NR__exit __NR_exit
#define NR_syscalls __NR_syscalls
diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h
index 380b5d3..8c478c6 100644
--- a/arch/powerpc/include/uapi/asm/unistd.h
+++ b/arch/powerpc/include/uapi/asm/unistd.h
@@ -375,6 +375,7 @@
#define __NR_setns 350
#define __NR_process_vm_readv 351
#define __NR_process_vm_writev 352
+#define __NR_finit_module 353
#endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c
index f1ddc0d..4435488 100644
--- a/arch/sparc/kernel/module.c
+++ b/arch/sparc/kernel/module.c
@@ -43,10 +43,6 @@
{
void *ret;
- /* We handle the zero case fine, unlike vmalloc */
- if (size == 0)
- return NULL;
-
ret = module_map(size);
if (ret)
memset(ret, 0, size);
diff --git a/arch/tile/kernel/module.c b/arch/tile/kernel/module.c
index 243ffeb..4918d91 100644
--- a/arch/tile/kernel/module.c
+++ b/arch/tile/kernel/module.c
@@ -42,8 +42,6 @@
int i = 0;
int npages;
- if (size == 0)
- return NULL;
npages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
pages = kmalloc(npages * sizeof(struct page *), GFP_KERNEL);
if (pages == NULL)
diff --git a/arch/unicore32/kernel/module.c b/arch/unicore32/kernel/module.c
index 8fbe857..16bd149 100644
--- a/arch/unicore32/kernel/module.c
+++ b/arch/unicore32/kernel/module.c
@@ -27,9 +27,6 @@
struct vm_struct *area;
size = PAGE_ALIGN(size);
- if (!size)
- return NULL;
-
area = __get_vm_area(size, VM_ALLOC, MODULES_VADDR, MODULES_END);
if (!area)
return NULL;
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index fbd8955..3286a92 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -26,11 +26,6 @@
#ifdef CONFIG_X86_32
static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
{
- /*
- * We use exception 16 if we have hardware math and we've either seen
- * it or the CPU claims it is internal
- */
- int fpu_exception = c->hard_math && (ignore_fpu_irq || cpu_has_fpu);
seq_printf(m,
"fdiv_bug\t: %s\n"
"hlt_bug\t\t: %s\n"
@@ -45,7 +40,7 @@
c->f00f_bug ? "yes" : "no",
c->coma_bug ? "yes" : "no",
c->hard_math ? "yes" : "no",
- fpu_exception ? "yes" : "no",
+ c->hard_math ? "yes" : "no",
c->cpuid_level,
c->wp_works_ok ? "yes" : "no");
}
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 6e03b0d..7dc4e45 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -42,39 +42,6 @@
* (these are usually mapped into the 0x30-0xff vector range)
*/
-#ifdef CONFIG_X86_32
-/*
- * Note that on a 486, we don't want to do a SIGFPE on an irq13
- * as the irq is unreliable, and exception 16 works correctly
- * (ie as explained in the intel literature). On a 386, you
- * can't use exception 16 due to bad IBM design, so we have to
- * rely on the less exact irq13.
- *
- * Careful.. Not only is IRQ13 unreliable, but it is also
- * leads to races. IBM designers who came up with it should
- * be shot.
- */
-
-static irqreturn_t math_error_irq(int cpl, void *dev_id)
-{
- outb(0, 0xF0);
- if (ignore_fpu_irq || !boot_cpu_data.hard_math)
- return IRQ_NONE;
- math_error(get_irq_regs(), 0, X86_TRAP_MF);
- return IRQ_HANDLED;
-}
-
-/*
- * New motherboards sometimes make IRQ 13 be a PCI interrupt,
- * so allow interrupt sharing.
- */
-static struct irqaction fpu_irq = {
- .handler = math_error_irq,
- .name = "fpu",
- .flags = IRQF_NO_THREAD,
-};
-#endif
-
/*
* IRQ2 is cascade interrupt to second interrupt controller
*/
@@ -242,13 +209,6 @@
setup_irq(2, &irq2);
#ifdef CONFIG_X86_32
- /*
- * External FPU? Set up irq13 if so, for
- * original braindamaged IBM FERR coupling.
- */
- if (boot_cpu_data.hard_math && !cpu_has_fpu)
- setup_irq(FPU_IRQ, &fpu_irq);
-
irq_ctx_init(smp_processor_id());
#endif
}
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index eb85866..ecffca1 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -69,9 +69,6 @@
asmlinkage int system_call(void);
-/* Do we ignore FPU interrupts ? */
-char ignore_fpu_irq;
-
/*
* The IDT has to be page-aligned to simplify the Pentium
* F0 0F bug workaround.
@@ -564,9 +561,6 @@
dotraplinkage void do_coprocessor_error(struct pt_regs *regs, long error_code)
{
-#ifdef CONFIG_X86_32
- ignore_fpu_irq = 1;
-#endif
exception_enter(regs);
math_error(regs, error_code, X86_TRAP_MF);
exception_exit(regs);
diff --git a/arch/x86/syscalls/syscall_32.tbl b/arch/x86/syscalls/syscall_32.tbl
index ee3c220..05f404f 100644
--- a/arch/x86/syscalls/syscall_32.tbl
+++ b/arch/x86/syscalls/syscall_32.tbl
@@ -356,3 +356,4 @@
347 i386 process_vm_readv sys_process_vm_readv compat_sys_process_vm_readv
348 i386 process_vm_writev sys_process_vm_writev compat_sys_process_vm_writev
349 i386 kcmp sys_kcmp
+350 i386 finit_module sys_finit_module
diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl
index a582bfe..7c58c84 100644
--- a/arch/x86/syscalls/syscall_64.tbl
+++ b/arch/x86/syscalls/syscall_64.tbl
@@ -319,6 +319,7 @@
310 64 process_vm_readv sys_process_vm_readv
311 64 process_vm_writev sys_process_vm_writev
312 common kcmp sys_kcmp
+313 common finit_module sys_finit_module
#
# x32-specific system call numbers start at 512 to avoid cache impact
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 2481f26..73d34e7 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -17,6 +17,7 @@
select GENERIC_KERNEL_EXECVE
select ARCH_WANT_OPTIONAL_GPIOLIB
select CLONE_BACKWARDS
+ select IRQ_DOMAIN
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
primarily for embedded systems. These processors are both
@@ -150,6 +151,15 @@
select SERIAL_CONSOLE
select NO_IOPORT
+config XTENSA_PLATFORM_XTFPGA
+ bool "XTFPGA"
+ select SERIAL_CONSOLE
+ select ETHOC
+ select XTENSA_CALIBRATE_CCOUNT
+ help
+ XTFPGA is the name of Tensilica board family (LX60, LX110, LX200, ML605).
+ This hardware is capable of running a full Linux distribution.
+
endchoice
@@ -177,6 +187,17 @@
time by entering them here. As a minimum, you should specify the
memory size and the root device (e.g., mem=64M root=/dev/nfs).
+config USE_OF
+ bool "Flattened Device Tree support"
+ select OF
+ select OF_EARLY_FLATTREE
+ help
+ Include support for flattened device tree machine descriptions.
+
+config BUILTIN_DTB
+ string "DTB to build into the kernel image"
+ depends on OF
+
source "mm/Kconfig"
source "drivers/pcmcia/Kconfig"
diff --git a/arch/xtensa/Kconfig.debug b/arch/xtensa/Kconfig.debug
index 11c5852..a34010e 100644
--- a/arch/xtensa/Kconfig.debug
+++ b/arch/xtensa/Kconfig.debug
@@ -2,6 +2,26 @@
source "lib/Kconfig.debug"
+config LD_NO_RELAX
+ bool "Disable linker relaxation"
+ default n
+ help
+ Enable this function to disable link-time optimizations.
+ The default linker behavior is to combine identical literal
+ values to reduce code size and remove unnecessary overhead from
+ assembler-generated 'longcall' sequences.
+ Enabling this option improves the link time but increases the
+ code size, and possibly execution time.
+
+config S32C1I_SELFTEST
+ bool "Perform S32C1I instruction self-test at boot"
+ default y
+ help
+ Enable this option to test S32C1I instruction behavior at boot.
+ Correct operation of this instruction requires some cooperation from hardware
+ external to the processor (such as bus bridge, bus fabric, or memory controller).
+ It is easy to make wrong hardware configuration, this test should catch it early.
+
+ Say 'N' on stable hardware.
+
endmenu
-
-
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index bb5ba61..0aa7270 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -38,6 +38,7 @@
platform-$(CONFIG_XTENSA_PLATFORM_XT2000) := xt2000
platform-$(CONFIG_XTENSA_PLATFORM_ISS) := iss
platform-$(CONFIG_XTENSA_PLATFORM_S6105) := s6105
+platform-$(CONFIG_XTENSA_PLATFORM_XTFPGA) := xtfpga
PLATFORM = $(platform-y)
export PLATFORM
@@ -49,6 +50,17 @@
KBUILD_CFLAGS += $(call cc-option,-mforce-no-pic,)
+ifneq ($(CONFIG_LD_NO_RELAX),)
+LDFLAGS := --no-relax
+endif
+
+ifeq ($(shell echo -e __XTENSA_EB__ | $(CC) -E - | grep -v "\#"),1)
+CHECKFLAGS += -D__XTENSA_EB__
+endif
+ifeq ($(shell echo -e __XTENSA_EL__ | $(CC) -E - | grep -v "\#"),1)
+CHECKFLAGS += -D__XTENSA_EL__
+endif
+
vardirs := $(patsubst %,arch/xtensa/variants/%/,$(variant-y))
plfdirs := $(patsubst %,arch/xtensa/platforms/%/,$(platform-y))
@@ -75,6 +87,10 @@
libs-y += arch/xtensa/lib/ $(LIBGCC)
+ifneq ($(CONFIG_BUILTIN_DTB),"")
+core-$(CONFIG_OF) += arch/xtensa/boot/
+endif
+
boot := arch/xtensa/boot
all: zImage
@@ -84,7 +100,9 @@
zImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
+%.dtb:
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
define archhelp
@echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)'
endef
-
diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile
index 4018f8994..818647e8 100644
--- a/arch/xtensa/boot/Makefile
+++ b/arch/xtensa/boot/Makefile
@@ -22,12 +22,35 @@
# Subdirs for the boot loader(s)
bootdir-$(CONFIG_XTENSA_PLATFORM_ISS) += boot-elf
-bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf
+bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf boot-uboot
+bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-redboot boot-elf boot-uboot
+BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB)).dtb.o
+ifneq ($(CONFIG_BUILTIN_DTB),"")
+obj-$(CONFIG_OF) += $(BUILTIN_DTB)
+endif
+
+# Rule to build device tree blobs
+$(obj)/%.dtb: $(src)/dts/%.dts FORCE
+ $(call if_changed_dep,dtc)
+
+clean-files := *.dtb.S
+
zImage Image: $(bootdir-y)
$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
$(addprefix $(obj)/,$(host-progs))
$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
+OBJCOPYFLAGS = --strip-all -R .comment -R .note.gnu.build-id -O binary
+
+vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+vmlinux.bin.gz: vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+boot-elf: vmlinux.bin
+boot-redboot: vmlinux.bin.gz
+boot-uboot: vmlinux.bin.gz
diff --git a/arch/xtensa/boot/boot-elf/Makefile b/arch/xtensa/boot/boot-elf/Makefile
index f10992b..1fe01b7 100644
--- a/arch/xtensa/boot/boot-elf/Makefile
+++ b/arch/xtensa/boot/boot-elf/Makefile
@@ -4,9 +4,6 @@
# for more details.
#
-GZIP = gzip
-GZIP_FLAGS = -v9fc
-
ifeq ($(BIG_ENDIAN),1)
OBJCOPY_ARGS := -O elf32-xtensa-be
else
@@ -20,18 +17,17 @@
OBJS := $(addprefix $(obj)/,$(boot-y))
-vmlinux.tmp: vmlinux
- $(OBJCOPY) --strip-all -R .comment -R .note.gnu.build-id -O binary \
- $^ $@
-
-Image: vmlinux.tmp $(OBJS) arch/$(ARCH)/boot/boot-elf/boot.lds
- $(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \
- --add-section image=vmlinux.tmp \
+$(obj)/Image.o: vmlinux.bin $(OBJS)
+ $(Q)$(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \
+ --add-section image=vmlinux.bin \
--set-section-flags image=contents,alloc,load,load,data \
- $(OBJS) $@.tmp
- $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \
- -T arch/$(ARCH)/boot/boot-elf/boot.lds \
- -o arch/$(ARCH)/boot/$@.elf $@.tmp
+ $(OBJS) $@
-zImage: Image
+$(obj)/../Image.elf: $(obj)/Image.o $(obj)/boot.lds
+ $(Q)$(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \
+ -T $(obj)/boot.lds \
+ --build-id=none \
+ -o $@ $(obj)/Image.o
+ $(Q)$(kecho) ' Kernel: $@ is ready'
+zImage: $(obj)/../Image.elf
diff --git a/arch/xtensa/boot/boot-redboot/Makefile b/arch/xtensa/boot/boot-redboot/Makefile
index 25a78c6b..8be8b94 100644
--- a/arch/xtensa/boot/boot-redboot/Makefile
+++ b/arch/xtensa/boot/boot-redboot/Makefile
@@ -4,8 +4,6 @@
# for more details.
#
-GZIP = gzip
-GZIP_FLAGS = -v9fc
ifeq ($(BIG_ENDIAN),1)
OBJCOPY_ARGS := -O elf32-xtensa-be
else
@@ -21,17 +19,17 @@
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-vmlinux.tmp: vmlinux
- $(OBJCOPY) --strip-all -R .comment -R .note.gnu.build-id -O binary \
- $^ $@
-
-vmlinux.tmp.gz: vmlinux.tmp
- $(GZIP) $(GZIP_FLAGS) $^ > $@
-
-zImage: vmlinux.tmp.gz $(OBJS) $(LIBS)
- $(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \
- --add-section image=vmlinux.tmp.gz \
+$(obj)/zImage.o: vmlinux.bin.gz $(OBJS)
+ $(Q)$(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \
+ --add-section image=vmlinux.bin.gz \
--set-section-flags image=contents,alloc,load,load,data \
- $(OBJS) $@.tmp
- $(LD) $(LD_ARGS) -o $@.elf $@.tmp $(LIBS) -L/xtensa-elf/lib $(LIBGCC)
- $(OBJCOPY) -S -O binary $@.elf arch/$(ARCH)/boot/$@.redboot
+ $(OBJS) $@
+
+$(obj)/zImage.elf: $(obj)/zImage.o $(LIBS)
+ $(Q)$(LD) $(LD_ARGS) -o $@ $^ -L/xtensa-elf/lib $(LIBGCC)
+
+$(obj)/../zImage.redboot: $(obj)/zImage.elf
+ $(Q)$(OBJCOPY) -S -O binary $< $@
+ $(Q)$(kecho) ' Kernel: $@ is ready'
+
+zImage: $(obj)/../zImage.redboot
diff --git a/arch/xtensa/boot/boot-uboot/Makefile b/arch/xtensa/boot/boot-uboot/Makefile
new file mode 100644
index 0000000..bfbf8af
--- /dev/null
+++ b/arch/xtensa/boot/boot-uboot/Makefile
@@ -0,0 +1,14 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+UIMAGE_LOADADDR = 0xd0001000
+UIMAGE_COMPRESSION = gzip
+
+$(obj)/../uImage: vmlinux.bin.gz FORCE
+ $(call if_changed,uimage)
+ $(Q)$(kecho) ' Kernel: $@ is ready'
+
+zImage: $(obj)/../uImage
diff --git a/arch/xtensa/boot/dts/lx60.dts b/arch/xtensa/boot/dts/lx60.dts
new file mode 100644
index 0000000..2eab365
--- /dev/null
+++ b/arch/xtensa/boot/dts/lx60.dts
@@ -0,0 +1,11 @@
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-4m.dtsi"
+
+/ {
+ compatible = "xtensa,lx60";
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x04000000>;
+ };
+};
diff --git a/arch/xtensa/boot/dts/ml605.dts b/arch/xtensa/boot/dts/ml605.dts
new file mode 100644
index 0000000..6ed51d65
--- /dev/null
+++ b/arch/xtensa/boot/dts/ml605.dts
@@ -0,0 +1,11 @@
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-16m.dtsi"
+
+/ {
+ compatible = "xtensa,ml605";
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+};
diff --git a/arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi b/arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi
new file mode 100644
index 0000000..e5703c7
--- /dev/null
+++ b/arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi
@@ -0,0 +1,26 @@
+/ {
+ flash: flash@f8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0xf8000000 0x01000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ partition@0x0 {
+ label = "boot loader area";
+ reg = <0x00000000 0x00400000>;
+ };
+ partition@0x400000 {
+ label = "kernel image";
+ reg = <0x00400000 0x00600000>;
+ };
+ partition@0xa00000 {
+ label = "data";
+ reg = <0x00a00000 0x005e0000>;
+ };
+ partition@0xfe0000 {
+ label = "boot environment";
+ reg = <0x00fe0000 0x00020000>;
+ };
+ };
+};
diff --git a/arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi b/arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi
new file mode 100644
index 0000000..6f9c10d
--- /dev/null
+++ b/arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi
@@ -0,0 +1,18 @@
+/ {
+ flash: flash@f8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0xf8000000 0x00400000>;
+ bank-width = <2>;
+ device-width = <2>;
+ partition@0x0 {
+ label = "boot loader area";
+ reg = <0x00000000 0x003f0000>;
+ };
+ partition@0x3f0000 {
+ label = "boot environment";
+ reg = <0x003f0000 0x00010000>;
+ };
+ };
+};
diff --git a/arch/xtensa/boot/dts/xtfpga.dtsi b/arch/xtensa/boot/dts/xtfpga.dtsi
new file mode 100644
index 0000000..7eda6ec
--- /dev/null
+++ b/arch/xtensa/boot/dts/xtfpga.dtsi
@@ -0,0 +1,56 @@
+/ {
+ compatible = "xtensa,xtfpga";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&pic>;
+
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x06000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "xtensa,cpu";
+ reg = <0>;
+ /* Filled in by platform_setup from FPGA register
+ * clock-frequency = <100000000>;
+ */
+ };
+ };
+
+ pic: pic {
+ compatible = "xtensa,pic";
+ /* one cell: internal irq number,
+ * two cells: second cell == 0: internal irq number
+ * second cell == 1: external irq number
+ */
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ serial0: serial@fd050020 {
+ device_type = "serial";
+ compatible = "ns16550a";
+ no-loopback-test;
+ reg = <0xfd050020 0x20>;
+ reg-shift = <2>;
+ interrupts = <0 1>; /* external irq 0 */
+ /* Filled in by platform_setup from FPGA register
+ * clock-frequency = <100000000>;
+ */
+ };
+
+ enet0: ethoc@fd030000 {
+ compatible = "opencores,ethoc";
+ reg = <0xfd030000 0x4000 0xfd800000 0x4000>;
+ interrupts = <1 1>; /* external irq 1 */
+ local-mac-address = [00 50 c2 13 6f 00];
+ };
+};
diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h
index 24f50ca..c3f2891 100644
--- a/arch/xtensa/include/asm/atomic.h
+++ b/arch/xtensa/include/asm/atomic.h
@@ -66,19 +66,35 @@
*/
static inline void atomic_add(int i, atomic_t * v)
{
- unsigned int vval;
+#if XCHAL_HAVE_S32C1I
+ unsigned long tmp;
+ int result;
- __asm__ __volatile__(
- "rsil a15, "__stringify(LOCKLEVEL)"\n\t"
- "l32i %0, %2, 0 \n\t"
- "add %0, %0, %1 \n\t"
- "s32i %0, %2, 0 \n\t"
- "wsr a15, ps \n\t"
- "rsync \n"
- : "=&a" (vval)
- : "a" (i), "a" (v)
- : "a15", "memory"
- );
+ __asm__ __volatile__(
+ "1: l32i %1, %3, 0\n"
+ " wsr %1, scompare1\n"
+ " add %0, %1, %2\n"
+ " s32c1i %0, %3, 0\n"
+ " bne %0, %1, 1b\n"
+ : "=&a" (result), "=&a" (tmp)
+ : "a" (i), "a" (v)
+ : "memory"
+ );
+#else
+ unsigned int vval;
+
+ __asm__ __volatile__(
+ " rsil a15, "__stringify(LOCKLEVEL)"\n"
+ " l32i %0, %2, 0\n"
+ " add %0, %0, %1\n"
+ " s32i %0, %2, 0\n"
+ " wsr a15, ps\n"
+ " rsync\n"
+ : "=&a" (vval)
+ : "a" (i), "a" (v)
+ : "a15", "memory"
+ );
+#endif
}
/**
@@ -90,19 +106,35 @@
*/
static inline void atomic_sub(int i, atomic_t *v)
{
- unsigned int vval;
+#if XCHAL_HAVE_S32C1I
+ unsigned long tmp;
+ int result;
- __asm__ __volatile__(
- "rsil a15, "__stringify(LOCKLEVEL)"\n\t"
- "l32i %0, %2, 0 \n\t"
- "sub %0, %0, %1 \n\t"
- "s32i %0, %2, 0 \n\t"
- "wsr a15, ps \n\t"
- "rsync \n"
- : "=&a" (vval)
- : "a" (i), "a" (v)
- : "a15", "memory"
- );
+ __asm__ __volatile__(
+ "1: l32i %1, %3, 0\n"
+ " wsr %1, scompare1\n"
+ " sub %0, %1, %2\n"
+ " s32c1i %0, %3, 0\n"
+ " bne %0, %1, 1b\n"
+ : "=&a" (result), "=&a" (tmp)
+ : "a" (i), "a" (v)
+ : "memory"
+ );
+#else
+ unsigned int vval;
+
+ __asm__ __volatile__(
+ " rsil a15, "__stringify(LOCKLEVEL)"\n"
+ " l32i %0, %2, 0\n"
+ " sub %0, %0, %1\n"
+ " s32i %0, %2, 0\n"
+ " wsr a15, ps\n"
+ " rsync\n"
+ : "=&a" (vval)
+ : "a" (i), "a" (v)
+ : "a15", "memory"
+ );
+#endif
}
/*
@@ -111,40 +143,78 @@
static inline int atomic_add_return(int i, atomic_t * v)
{
- unsigned int vval;
+#if XCHAL_HAVE_S32C1I
+ unsigned long tmp;
+ int result;
- __asm__ __volatile__(
- "rsil a15,"__stringify(LOCKLEVEL)"\n\t"
- "l32i %0, %2, 0 \n\t"
- "add %0, %0, %1 \n\t"
- "s32i %0, %2, 0 \n\t"
- "wsr a15, ps \n\t"
- "rsync \n"
- : "=&a" (vval)
- : "a" (i), "a" (v)
- : "a15", "memory"
- );
+ __asm__ __volatile__(
+ "1: l32i %1, %3, 0\n"
+ " wsr %1, scompare1\n"
+ " add %0, %1, %2\n"
+ " s32c1i %0, %3, 0\n"
+ " bne %0, %1, 1b\n"
+ " add %0, %0, %2\n"
+ : "=&a" (result), "=&a" (tmp)
+ : "a" (i), "a" (v)
+ : "memory"
+ );
- return vval;
+ return result;
+#else
+ unsigned int vval;
+
+ __asm__ __volatile__(
+ " rsil a15,"__stringify(LOCKLEVEL)"\n"
+ " l32i %0, %2, 0\n"
+ " add %0, %0, %1\n"
+ " s32i %0, %2, 0\n"
+ " wsr a15, ps\n"
+ " rsync\n"
+ : "=&a" (vval)
+ : "a" (i), "a" (v)
+ : "a15", "memory"
+ );
+
+ return vval;
+#endif
}
static inline int atomic_sub_return(int i, atomic_t * v)
{
- unsigned int vval;
+#if XCHAL_HAVE_S32C1I
+ unsigned long tmp;
+ int result;
- __asm__ __volatile__(
- "rsil a15,"__stringify(LOCKLEVEL)"\n\t"
- "l32i %0, %2, 0 \n\t"
- "sub %0, %0, %1 \n\t"
- "s32i %0, %2, 0 \n\t"
- "wsr a15, ps \n\t"
- "rsync \n"
- : "=&a" (vval)
- : "a" (i), "a" (v)
- : "a15", "memory"
- );
+ __asm__ __volatile__(
+ "1: l32i %1, %3, 0\n"
+ " wsr %1, scompare1\n"
+ " sub %0, %1, %2\n"
+ " s32c1i %0, %3, 0\n"
+ " bne %0, %1, 1b\n"
+ " sub %0, %0, %2\n"
+ : "=&a" (result), "=&a" (tmp)
+ : "a" (i), "a" (v)
+ : "memory"
+ );
- return vval;
+ return result;
+#else
+ unsigned int vval;
+
+ __asm__ __volatile__(
+ " rsil a15,"__stringify(LOCKLEVEL)"\n"
+ " l32i %0, %2, 0\n"
+ " sub %0, %0, %1\n"
+ " s32i %0, %2, 0\n"
+ " wsr a15, ps\n"
+ " rsync\n"
+ : "=&a" (vval)
+ : "a" (i), "a" (v)
+ : "a15", "memory"
+ );
+
+ return vval;
+#endif
}
/**
@@ -251,38 +321,70 @@
static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
{
- unsigned int all_f = -1;
- unsigned int vval;
+#if XCHAL_HAVE_S32C1I
+ unsigned long tmp;
+ int result;
- __asm__ __volatile__(
- "rsil a15,"__stringify(LOCKLEVEL)"\n\t"
- "l32i %0, %2, 0 \n\t"
- "xor %1, %4, %3 \n\t"
- "and %0, %0, %4 \n\t"
- "s32i %0, %2, 0 \n\t"
- "wsr a15, ps \n\t"
- "rsync \n"
- : "=&a" (vval), "=a" (mask)
- : "a" (v), "a" (all_f), "1" (mask)
- : "a15", "memory"
- );
+ __asm__ __volatile__(
+ "1: l32i %1, %3, 0\n"
+ " wsr %1, scompare1\n"
+ " and %0, %1, %2\n"
+ " s32c1i %0, %3, 0\n"
+ " bne %0, %1, 1b\n"
+ : "=&a" (result), "=&a" (tmp)
+ : "a" (~mask), "a" (v)
+ : "memory"
+ );
+#else
+ unsigned int all_f = -1;
+ unsigned int vval;
+
+ __asm__ __volatile__(
+ " rsil a15,"__stringify(LOCKLEVEL)"\n"
+ " l32i %0, %2, 0\n"
+ " xor %1, %4, %3\n"
+ " and %0, %0, %4\n"
+ " s32i %0, %2, 0\n"
+ " wsr a15, ps\n"
+ " rsync\n"
+ : "=&a" (vval), "=a" (mask)
+ : "a" (v), "a" (all_f), "1" (mask)
+ : "a15", "memory"
+ );
+#endif
}
static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
{
- unsigned int vval;
+#if XCHAL_HAVE_S32C1I
+ unsigned long tmp;
+ int result;
- __asm__ __volatile__(
- "rsil a15,"__stringify(LOCKLEVEL)"\n\t"
- "l32i %0, %2, 0 \n\t"
- "or %0, %0, %1 \n\t"
- "s32i %0, %2, 0 \n\t"
- "wsr a15, ps \n\t"
- "rsync \n"
- : "=&a" (vval)
- : "a" (mask), "a" (v)
- : "a15", "memory"
- );
+ __asm__ __volatile__(
+ "1: l32i %1, %3, 0\n"
+ " wsr %1, scompare1\n"
+ " or %0, %1, %2\n"
+ " s32c1i %0, %3, 0\n"
+ " bne %0, %1, 1b\n"
+ : "=&a" (result), "=&a" (tmp)
+ : "a" (mask), "a" (v)
+ : "memory"
+ );
+#else
+ unsigned int vval;
+
+ __asm__ __volatile__(
+ " rsil a15,"__stringify(LOCKLEVEL)"\n"
+ " l32i %0, %2, 0\n"
+ " or %0, %0, %1\n"
+ " s32i %0, %2, 0\n"
+ " wsr a15, ps\n"
+ " rsync\n"
+ : "=&a" (vval)
+ : "a" (mask), "a" (v)
+ : "a15", "memory"
+ );
+#endif
}
/* Atomic operations are already serializing */
@@ -294,4 +396,3 @@
#endif /* __KERNEL__ */
#endif /* _XTENSA_ATOMIC_H */
-
diff --git a/arch/xtensa/include/asm/barrier.h b/arch/xtensa/include/asm/barrier.h
index 55707a8..ef02167 100644
--- a/arch/xtensa/include/asm/barrier.h
+++ b/arch/xtensa/include/asm/barrier.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2001 - 2005 Tensilica Inc.
+ * Copyright (C) 2001 - 2012 Tensilica Inc.
*/
#ifndef _XTENSA_SYSTEM_H
@@ -12,8 +12,8 @@
#define smp_read_barrier_depends() do { } while(0)
#define read_barrier_depends() do { } while(0)
-#define mb() barrier()
-#define rmb() mb()
+#define mb() ({ __asm__ __volatile__("memw" : : : "memory"); })
+#define rmb() barrier()
#define wmb() mb()
#ifdef CONFIG_SMP
diff --git a/arch/xtensa/include/asm/bitops.h b/arch/xtensa/include/asm/bitops.h
index 5270197..84afe58d 100644
--- a/arch/xtensa/include/asm/bitops.h
+++ b/arch/xtensa/include/asm/bitops.h
@@ -29,7 +29,6 @@
#define smp_mb__before_clear_bit() barrier()
#define smp_mb__after_clear_bit() barrier()
-#include <asm-generic/bitops/atomic.h>
#include <asm-generic/bitops/non-atomic.h>
#if XCHAL_HAVE_NSA
@@ -104,6 +103,132 @@
#endif
#include <asm-generic/bitops/fls64.h>
+
+#if XCHAL_HAVE_S32C1I
+
+static inline void set_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long tmp, value;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __asm__ __volatile__(
+ "1: l32i %1, %3, 0\n"
+ " wsr %1, scompare1\n"
+ " or %0, %1, %2\n"
+ " s32c1i %0, %3, 0\n"
+ " bne %0, %1, 1b\n"
+ : "=&a" (tmp), "=&a" (value)
+ : "a" (mask), "a" (p)
+ : "memory");
+}
+
+static inline void clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long tmp, value;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __asm__ __volatile__(
+ "1: l32i %1, %3, 0\n"
+ " wsr %1, scompare1\n"
+ " and %0, %1, %2\n"
+ " s32c1i %0, %3, 0\n"
+ " bne %0, %1, 1b\n"
+ : "=&a" (tmp), "=&a" (value)
+ : "a" (~mask), "a" (p)
+ : "memory");
+}
+
+static inline void change_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long tmp, value;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __asm__ __volatile__(
+ "1: l32i %1, %3, 0\n"
+ " wsr %1, scompare1\n"
+ " xor %0, %1, %2\n"
+ " s32c1i %0, %3, 0\n"
+ " bne %0, %1, 1b\n"
+ : "=&a" (tmp), "=&a" (value)
+ : "a" (mask), "a" (p)
+ : "memory");
+}
+
+static inline int
+test_and_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long tmp, value;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __asm__ __volatile__(
+ "1: l32i %1, %3, 0\n"
+ " wsr %1, scompare1\n"
+ " or %0, %1, %2\n"
+ " s32c1i %0, %3, 0\n"
+ " bne %0, %1, 1b\n"
+ : "=&a" (tmp), "=&a" (value)
+ : "a" (mask), "a" (p)
+ : "memory");
+
+ return tmp & mask;
+}
+
+static inline int
+test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long tmp, value;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __asm__ __volatile__(
+ "1: l32i %1, %3, 0\n"
+ " wsr %1, scompare1\n"
+ " and %0, %1, %2\n"
+ " s32c1i %0, %3, 0\n"
+ " bne %0, %1, 1b\n"
+ : "=&a" (tmp), "=&a" (value)
+ : "a" (~mask), "a" (p)
+ : "memory");
+
+ return tmp & mask;
+}
+
+static inline int
+test_and_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long tmp, value;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __asm__ __volatile__(
+ "1: l32i %1, %3, 0\n"
+ " wsr %1, scompare1\n"
+ " xor %0, %1, %2\n"
+ " s32c1i %0, %3, 0\n"
+ " bne %0, %1, 1b\n"
+ : "=&a" (tmp), "=&a" (value)
+ : "a" (mask), "a" (p)
+ : "memory");
+
+ return tmp & mask;
+}
+
+#else
+
+#include <asm-generic/bitops/atomic.h>
+
+#endif /* XCHAL_HAVE_S32C1I */
+
#include <asm-generic/bitops/find.h>
#include <asm-generic/bitops/le.h>
diff --git a/arch/xtensa/include/asm/bootparam.h b/arch/xtensa/include/asm/bootparam.h
index 9983f2c..0c25799 100644
--- a/arch/xtensa/include/asm/bootparam.h
+++ b/arch/xtensa/include/asm/bootparam.h
@@ -22,6 +22,7 @@
#define BP_TAG_MEMORY 0x1003 /* memory addr and size (bp_meminfo) */
#define BP_TAG_SERIAL_BAUSRATE 0x1004 /* baud rate of current console. */
#define BP_TAG_SERIAL_PORT 0x1005 /* serial device of current console */
+#define BP_TAG_FDT 0x1006 /* flat device tree addr */
#define BP_TAG_FIRST 0x7B0B /* first tag with a version number */
#define BP_TAG_LAST 0x7E0B /* last tag */
@@ -31,15 +32,15 @@
/* All records are aligned to 4 bytes */
typedef struct bp_tag {
- unsigned short id; /* tag id */
- unsigned short size; /* size of this record excluding the structure*/
- unsigned long data[0]; /* data */
+ unsigned short id; /* tag id */
+ unsigned short size; /* size of this record excluding the structure*/
+ unsigned long data[0]; /* data */
} bp_tag_t;
typedef struct meminfo {
- unsigned long type;
- unsigned long start;
- unsigned long end;
+ unsigned long type;
+ unsigned long start;
+ unsigned long end;
} meminfo_t;
#define SYSMEM_BANKS_MAX 5
@@ -48,14 +49,11 @@
#define MEMORY_TYPE_NONE 0x2000
typedef struct sysmem_info {
- int nr_banks;
- meminfo_t bank[SYSMEM_BANKS_MAX];
+ int nr_banks;
+ meminfo_t bank[SYSMEM_BANKS_MAX];
} sysmem_info_t;
extern sysmem_info_t sysmem;
#endif
#endif
-
-
-
diff --git a/arch/xtensa/include/asm/cacheasm.h b/arch/xtensa/include/asm/cacheasm.h
index 2c20a58..60e1877 100644
--- a/arch/xtensa/include/asm/cacheasm.h
+++ b/arch/xtensa/include/asm/cacheasm.h
@@ -174,4 +174,3 @@
__loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH
.endm
-
diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h
index 569fec4..127cd48 100644
--- a/arch/xtensa/include/asm/cacheflush.h
+++ b/arch/xtensa/include/asm/cacheflush.h
@@ -104,7 +104,8 @@
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
extern void flush_dcache_page(struct page*);
extern void flush_cache_range(struct vm_area_struct*, ulong, ulong);
-extern void flush_cache_page(struct vm_area_struct*, unsigned long, unsigned long);
+extern void flush_cache_page(struct vm_area_struct*,
+ unsigned long, unsigned long);
#else
diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h
index e4d831a..aed7ad6 100644
--- a/arch/xtensa/include/asm/checksum.h
+++ b/arch/xtensa/include/asm/checksum.h
@@ -36,8 +36,9 @@
* better 64-bit) boundary
*/
-asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, int len, __wsum sum,
- int *src_err_ptr, int *dst_err_ptr);
+asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst,
+ int len, __wsum sum,
+ int *src_err_ptr, int *dst_err_ptr);
/*
* Note: when you get a NULL pointer exception here this means someone
@@ -54,7 +55,7 @@
static inline
__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *err_ptr)
+ int len, __wsum sum, int *err_ptr)
{
return csum_partial_copy_generic((__force const void *)src, dst,
len, sum, err_ptr, NULL);
@@ -112,7 +113,8 @@
/* Since the input registers which are loaded with iph and ihl
are modified, we must also specify them as outputs, or gcc
will assume they contain their original values. */
- : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmp), "=&r" (endaddr)
+ : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmp),
+ "=&r" (endaddr)
: "1" (iph), "2" (ihl)
: "memory");
@@ -168,7 +170,7 @@
static __inline__ __sum16 ip_compute_csum(const void *buff, int len)
{
- return csum_fold (csum_partial(buff, len, 0));
+ return csum_fold (csum_partial(buff, len, 0));
}
#define _HAVE_ARCH_IPV6_CSUM
@@ -238,11 +240,12 @@
* Copy and checksum to user
*/
#define HAVE_CSUM_COPY_USER
-static __inline__ __wsum csum_and_copy_to_user(const void *src, void __user *dst,
- int len, __wsum sum, int *err_ptr)
+static __inline__ __wsum csum_and_copy_to_user(const void *src,
+ void __user *dst, int len,
+ __wsum sum, int *err_ptr)
{
if (access_ok(VERIFY_WRITE, dst, len))
- return csum_partial_copy_generic(src, dst, len, sum, NULL, err_ptr);
+ return csum_partial_copy_generic(src,dst,len,sum,NULL,err_ptr);
if (len)
*err_ptr = -EFAULT;
diff --git a/arch/xtensa/include/asm/cmpxchg.h b/arch/xtensa/include/asm/cmpxchg.h
index 64dad04..d9ab131 100644
--- a/arch/xtensa/include/asm/cmpxchg.h
+++ b/arch/xtensa/include/asm/cmpxchg.h
@@ -22,17 +22,30 @@
static inline unsigned long
__cmpxchg_u32(volatile int *p, int old, int new)
{
- __asm__ __volatile__("rsil a15, "__stringify(LOCKLEVEL)"\n\t"
- "l32i %0, %1, 0 \n\t"
- "bne %0, %2, 1f \n\t"
- "s32i %3, %1, 0 \n\t"
- "1: \n\t"
- "wsr a15, ps \n\t"
- "rsync \n\t"
- : "=&a" (old)
- : "a" (p), "a" (old), "r" (new)
- : "a15", "memory");
- return old;
+#if XCHAL_HAVE_S32C1I
+ __asm__ __volatile__(
+ " wsr %2, scompare1\n"
+ " s32c1i %0, %1, 0\n"
+ : "+a" (new)
+ : "a" (p), "a" (old)
+ : "memory"
+ );
+
+ return new;
+#else
+ __asm__ __volatile__(
+ " rsil a15, "__stringify(LOCKLEVEL)"\n"
+ " l32i %0, %1, 0\n"
+ " bne %0, %2, 1f\n"
+ " s32i %3, %1, 0\n"
+ "1:\n"
+ " wsr a15, ps\n"
+ " rsync\n"
+ : "=&a" (old)
+ : "a" (p), "a" (old), "r" (new)
+ : "a15", "memory");
+ return old;
+#endif
}
/* This function doesn't exist, so you'll get a linker error
* if something tries to do an invalid cmpxchg(). */
@@ -93,19 +106,36 @@
static inline unsigned long xchg_u32(volatile int * m, unsigned long val)
{
- unsigned long tmp;
- __asm__ __volatile__("rsil a15, "__stringify(LOCKLEVEL)"\n\t"
- "l32i %0, %1, 0 \n\t"
- "s32i %2, %1, 0 \n\t"
- "wsr a15, ps \n\t"
- "rsync \n\t"
- : "=&a" (tmp)
- : "a" (m), "a" (val)
- : "a15", "memory");
- return tmp;
+#if XCHAL_HAVE_S32C1I
+ unsigned long tmp, result;
+ __asm__ __volatile__(
+ "1: l32i %1, %2, 0\n"
+ " mov %0, %3\n"
+ " wsr %1, scompare1\n"
+ " s32c1i %0, %2, 0\n"
+ " bne %0, %1, 1b\n"
+ : "=&a" (result), "=&a" (tmp)
+ : "a" (m), "a" (val)
+ : "memory"
+ );
+ return result;
+#else
+ unsigned long tmp;
+ __asm__ __volatile__(
+ " rsil a15, "__stringify(LOCKLEVEL)"\n"
+ " l32i %0, %1, 0\n"
+ " s32i %2, %1, 0\n"
+ " wsr a15, ps\n"
+ " rsync\n"
+ : "=&a" (tmp)
+ : "a" (m), "a" (val)
+ : "a15", "memory");
+ return tmp;
+#endif
}
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define xchg(ptr,x) \
+ ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
/*
* This only works if the compiler isn't horribly bad at optimizing.
diff --git a/arch/xtensa/include/asm/current.h b/arch/xtensa/include/asm/current.h
index 8d1eb5d..47e46dc 100644
--- a/arch/xtensa/include/asm/current.h
+++ b/arch/xtensa/include/asm/current.h
@@ -30,7 +30,7 @@
#define GET_CURRENT(reg,sp) \
GET_THREAD_INFO(reg,sp); \
- l32i reg, reg, TI_TASK \
+ l32i reg, reg, TI_TASK \
#endif
diff --git a/arch/xtensa/include/asm/delay.h b/arch/xtensa/include/asm/delay.h
index 58c0a4f..61fc5fa 100644
--- a/arch/xtensa/include/asm/delay.h
+++ b/arch/xtensa/include/asm/delay.h
@@ -19,9 +19,9 @@
static inline void __delay(unsigned long loops)
{
- /* 2 cycles per loop. */
- __asm__ __volatile__ ("1: addi %0, %0, -2; bgeui %0, 2, 1b"
- : "=r" (loops) : "0" (loops));
+ /* 2 cycles per loop. */
+ __asm__ __volatile__ ("1: addi %0, %0, -2; bgeui %0, 2, 1b"
+ : "=r" (loops) : "0" (loops));
}
static __inline__ u32 xtensa_get_ccount(void)
@@ -46,4 +46,3 @@
}
#endif
-
diff --git a/arch/xtensa/include/asm/dma-mapping.h b/arch/xtensa/include/asm/dma-mapping.h
index 492c957..4acb5feb 100644
--- a/arch/xtensa/include/asm/dma-mapping.h
+++ b/arch/xtensa/include/asm/dma-mapping.h
@@ -16,6 +16,8 @@
#include <linux/mm.h>
#include <linux/scatterlist.h>
+#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
+
/*
* DMA-consistent mapping functions.
*/
@@ -98,8 +100,8 @@
}
static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction)
{
consistent_sync((void *)bus_to_virt(dma_handle), size, direction);
}
diff --git a/arch/xtensa/include/asm/elf.h b/arch/xtensa/include/asm/elf.h
index 5293312..264d5fa 100644
--- a/arch/xtensa/include/asm/elf.h
+++ b/arch/xtensa/include/asm/elf.h
@@ -168,11 +168,11 @@
*/
#define ELF_PLAT_INIT(_r, load_addr) \
- do { _r->areg[0]=0; /*_r->areg[1]=0;*/ _r->areg[2]=0; _r->areg[3]=0; \
- _r->areg[4]=0; _r->areg[5]=0; _r->areg[6]=0; _r->areg[7]=0; \
- _r->areg[8]=0; _r->areg[9]=0; _r->areg[10]=0; _r->areg[11]=0; \
- _r->areg[12]=0; _r->areg[13]=0; _r->areg[14]=0; _r->areg[15]=0; \
- } while (0)
+ do { _r->areg[0]=0; /*_r->areg[1]=0;*/ _r->areg[2]=0; _r->areg[3]=0; \
+ _r->areg[4]=0; _r->areg[5]=0; _r->areg[6]=0; _r->areg[7]=0; \
+ _r->areg[8]=0; _r->areg[9]=0; _r->areg[10]=0; _r->areg[11]=0; \
+ _r->areg[12]=0; _r->areg[13]=0; _r->areg[14]=0; _r->areg[15]=0; \
+ } while (0)
typedef struct {
xtregs_opt_t opt;
diff --git a/arch/xtensa/include/asm/highmem.h b/arch/xtensa/include/asm/highmem.h
index 0a046ca..80be151 100644
--- a/arch/xtensa/include/asm/highmem.h
+++ b/arch/xtensa/include/asm/highmem.h
@@ -14,4 +14,3 @@
extern void flush_cache_kmaps(void);
#endif
-
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
new file mode 100644
index 0000000..e1f8ba4
--- /dev/null
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -0,0 +1,55 @@
+/*
+ * arch/xtensa/include/asm/initialize_mmu.h
+ *
+ * Initializes MMU:
+ *
+ * For the new V3 MMU we remap the TLB from virtual == physical
+ * to the standard Linux mapping used in earlier MMU's.
+ *
+ * The the MMU we also support a new configuration register that
+ * specifies how the S32C1I instruction operates with the cache
+ * controller.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2008 - 2012 Tensilica, Inc.
+ *
+ * Marc Gauthier <marc@tensilica.com>
+ * Pete Delaney <piet@tensilica.com>
+ */
+
+#ifndef _XTENSA_INITIALIZE_MMU_H
+#define _XTENSA_INITIALIZE_MMU_H
+
+#ifdef __ASSEMBLY__
+
+#define XTENSA_HWVERSION_RC_2009_0 230000
+
+ .macro initialize_mmu
+
+#if XCHAL_HAVE_S32C1I && (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
+/*
+ * We Have Atomic Operation Control (ATOMCTL) Register; Initialize it.
+ * For details see Documentation/xtensa/atomctl.txt
+ */
+#if XCHAL_DCACHE_IS_COHERENT
+ movi a3, 0x25 /* For SMP/MX -- internal for writeback,
+ * RCW otherwise
+ */
+#else
+ movi a3, 0x29 /* non-MX -- Most cores use Std Memory
+ * Controlers which usually can't use RCW
+ */
+#endif
+ wsr a3, atomctl
+#endif /* XCHAL_HAVE_S32C1I &&
+ * (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
+ */
+
+ .endm
+
+#endif /*__ASSEMBLY__*/
+
+#endif /* _XTENSA_INITIALIZE_MMU_H */
diff --git a/arch/xtensa/include/asm/mmu_context.h b/arch/xtensa/include/asm/mmu_context.h
index feb10af..d43525a 100644
--- a/arch/xtensa/include/asm/mmu_context.h
+++ b/arch/xtensa/include/asm/mmu_context.h
@@ -107,7 +107,7 @@
static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
- struct task_struct *tsk)
+ struct task_struct *tsk)
{
unsigned long asid = asid_cache;
diff --git a/arch/xtensa/include/asm/nommu_context.h b/arch/xtensa/include/asm/nommu_context.h
index 599e7a2..3407cf7 100644
--- a/arch/xtensa/include/asm/nommu_context.h
+++ b/arch/xtensa/include/asm/nommu_context.h
@@ -2,7 +2,7 @@
{
}
-static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+static inline int init_new_context(struct task_struct *tsk,struct mm_struct *mm)
{
return 0;
}
diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h
index 7a5591a7..47f5823 100644
--- a/arch/xtensa/include/asm/page.h
+++ b/arch/xtensa/include/asm/page.h
@@ -29,19 +29,19 @@
* PAGE_SHIFT determines the page size
*/
-#define PAGE_SHIFT 12
-#define PAGE_SIZE (__XTENSA_UL_CONST(1) << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
+#define PAGE_SHIFT 12
+#define PAGE_SIZE (__XTENSA_UL_CONST(1) << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
#ifdef CONFIG_MMU
-#define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR
-#define MAX_MEM_PFN XCHAL_KSEG_SIZE
+#define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR
+#define MAX_MEM_PFN XCHAL_KSEG_SIZE
#else
-#define PAGE_OFFSET 0
-#define MAX_MEM_PFN (PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE)
+#define PAGE_OFFSET 0
+#define MAX_MEM_PFN (PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE)
#endif
-#define PGTABLE_START 0x80000000
+#define PGTABLE_START 0x80000000
/*
* Cache aliasing:
@@ -161,7 +161,9 @@
#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET)
#define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET))
-#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && ((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
+#define pfn_valid(pfn) \
+ ((pfn) >= ARCH_PFN_OFFSET && ((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
+
#ifdef CONFIG_DISCONTIGMEM
# error CONFIG_DISCONTIGMEM not supported
#endif
diff --git a/arch/xtensa/include/asm/pci-bridge.h b/arch/xtensa/include/asm/pci-bridge.h
index 00fcbd7..0b68c76 100644
--- a/arch/xtensa/include/asm/pci-bridge.h
+++ b/arch/xtensa/include/asm/pci-bridge.h
@@ -35,7 +35,7 @@
struct pci_controller {
int index; /* used for pci_controller_num */
struct pci_controller *next;
- struct pci_bus *bus;
+ struct pci_bus *bus;
void *arch_data;
int first_busno;
diff --git a/arch/xtensa/include/asm/pci.h b/arch/xtensa/include/asm/pci.h
index 05244f0..614be03 100644
--- a/arch/xtensa/include/asm/pci.h
+++ b/arch/xtensa/include/asm/pci.h
@@ -53,7 +53,7 @@
/* Map a range of PCI memory or I/O space for a device into user space */
int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
+ enum pci_mmap_state mmap_state, int write_combine);
/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
#define HAVE_PCI_MMAP 1
diff --git a/arch/xtensa/include/asm/pgalloc.h b/arch/xtensa/include/asm/pgalloc.h
index 40cf9bc..cf914c8 100644
--- a/arch/xtensa/include/asm/pgalloc.h
+++ b/arch/xtensa/include/asm/pgalloc.h
@@ -42,7 +42,7 @@
extern struct kmem_cache *pgtable_cache;
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
unsigned long address)
{
return kmem_cache_alloc(pgtable_cache, GFP_KERNEL|__GFP_REPEAT);
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index b03c043..c90ea5b 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -284,7 +284,7 @@
static inline int
ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr,
- pte_t *ptep)
+ pte_t *ptep)
{
pte_t pte = *ptep;
if (!pte_young(pte))
@@ -304,8 +304,8 @@
static inline void
ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
- pte_t pte = *ptep;
- update_pte(ptep, pte_wrprotect(pte));
+ pte_t pte = *ptep;
+ update_pte(ptep, pte_wrprotect(pte));
}
/* to find an entry in a kernel page-table-directory */
@@ -399,7 +399,7 @@
*/
#define io_remap_pfn_range(vma,from,pfn,size,prot) \
- remap_pfn_range(vma, from, pfn, size, prot)
+ remap_pfn_range(vma, from, pfn, size, prot)
typedef pte_t *pte_addr_t;
diff --git a/arch/xtensa/include/asm/platform.h b/arch/xtensa/include/asm/platform.h
index 7d936e5..ec098b6 100644
--- a/arch/xtensa/include/asm/platform.h
+++ b/arch/xtensa/include/asm/platform.h
@@ -75,4 +75,3 @@
extern void platform_calibrate_ccount (void);
#endif /* _XTENSA_PLATFORM_H */
-
diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h
index 2d630e7..e5fb6b0a 100644
--- a/arch/xtensa/include/asm/processor.h
+++ b/arch/xtensa/include/asm/processor.h
@@ -89,7 +89,7 @@
#define MAKE_PC_FROM_RA(ra,sp) (((ra) & 0x3fffffff) | ((sp) & 0xc0000000))
typedef struct {
- unsigned long seg;
+ unsigned long seg;
} mm_segment_t;
struct thread_struct {
@@ -145,10 +145,10 @@
* set_thread_state in signal.c depends on it.
*/
#define USER_PS_VALUE ((1 << PS_WOE_BIT) | \
- (1 << PS_CALLINC_SHIFT) | \
- (USER_RING << PS_RING_SHIFT) | \
- (1 << PS_UM_BIT) | \
- (1 << PS_EXCM_BIT))
+ (1 << PS_CALLINC_SHIFT) | \
+ (USER_RING << PS_RING_SHIFT) | \
+ (1 << PS_UM_BIT) | \
+ (1 << PS_EXCM_BIT))
/* Clearing a0 terminates the backtrace. */
#define start_thread(regs, new_pc, new_sp) \
diff --git a/arch/xtensa/include/asm/prom.h b/arch/xtensa/include/asm/prom.h
new file mode 100644
index 0000000..f3d7cd2
--- /dev/null
+++ b/arch/xtensa/include/asm/prom.h
@@ -0,0 +1,6 @@
+#ifndef _XTENSA_ASM_PROM_H
+#define _XTENSA_ASM_PROM_H
+
+#define HAVE_ARCH_DEVTREE_FIXUPS
+
+#endif /* _XTENSA_ASM_PROM_H */
diff --git a/arch/xtensa/include/asm/ptrace.h b/arch/xtensa/include/asm/ptrace.h
index da21c17..58bf6fd 100644
--- a/arch/xtensa/include/asm/ptrace.h
+++ b/arch/xtensa/include/asm/ptrace.h
@@ -37,7 +37,7 @@
unsigned long windowstart; /* 52 */
unsigned long syscall; /* 56 */
unsigned long icountlevel; /* 60 */
- int reserved[1]; /* 64 */
+ unsigned long scompare1; /* 64 */
/* Additional configurable registers that are used by the compiler. */
xtregs_opt_t xtregs_opt;
@@ -55,7 +55,7 @@
# define arch_has_single_step() (1)
# define task_pt_regs(tsk) ((struct pt_regs*) \
- (task_stack_page(tsk) + KERNEL_STACK_SIZE - (XCHAL_NUM_AREGS-16)*4) - 1)
+ (task_stack_page(tsk) + KERNEL_STACK_SIZE - (XCHAL_NUM_AREGS-16)*4) - 1)
# define user_mode(regs) (((regs)->ps & 0x00000020)!=0)
# define instruction_pointer(regs) ((regs)->pc)
diff --git a/arch/xtensa/include/asm/regs.h b/arch/xtensa/include/asm/regs.h
index 8a8aa61..76096a4 100644
--- a/arch/xtensa/include/asm/regs.h
+++ b/arch/xtensa/include/asm/regs.h
@@ -52,6 +52,10 @@
#define EXCCAUSE_SPECULATION 7
#define EXCCAUSE_PRIVILEGED 8
#define EXCCAUSE_UNALIGNED 9
+#define EXCCAUSE_INSTR_DATA_ERROR 12
+#define EXCCAUSE_LOAD_STORE_DATA_ERROR 13
+#define EXCCAUSE_INSTR_ADDR_ERROR 14
+#define EXCCAUSE_LOAD_STORE_ADDR_ERROR 15
#define EXCCAUSE_ITLB_MISS 16
#define EXCCAUSE_ITLB_MULTIHIT 17
#define EXCCAUSE_ITLB_PRIVILEGE 18
@@ -105,4 +109,3 @@
#define DEBUGCAUSE_ICOUNT_BIT 0 /* ICOUNT would incr. to zero */
#endif /* _XTENSA_SPECREG_H */
-
diff --git a/arch/xtensa/include/asm/spinlock.h b/arch/xtensa/include/asm/spinlock.h
index 8ff2364..0397590 100644
--- a/arch/xtensa/include/asm/spinlock.h
+++ b/arch/xtensa/include/asm/spinlock.h
@@ -11,6 +11,192 @@
#ifndef _XTENSA_SPINLOCK_H
#define _XTENSA_SPINLOCK_H
-#include <linux/spinlock.h>
+/*
+ * spinlock
+ *
+ * There is at most one owner of a spinlock. There are not different
+ * types of spinlock owners like there are for rwlocks (see below).
+ *
+ * When trying to obtain a spinlock, the function "spins" forever, or busy-
+ * waits, until the lock is obtained. When spinning, presumably some other
+ * owner will soon give up the spinlock making it available to others. Use
+ * the trylock functions to avoid spinning forever.
+ *
+ * possible values:
+ *
+ * 0 nobody owns the spinlock
+ * 1 somebody owns the spinlock
+ */
+
+#define __raw_spin_is_locked(x) ((x)->slock != 0)
+#define __raw_spin_unlock_wait(lock) \
+ do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ " movi %0, 0\n"
+ " wsr %0, scompare1\n"
+ "1: movi %0, 1\n"
+ " s32c1i %0, %1, 0\n"
+ " bnez %0, 1b\n"
+ : "=&a" (tmp)
+ : "a" (&lock->slock)
+ : "memory");
+}
+
+/* Returns 1 if the lock is obtained, 0 otherwise. */
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ " movi %0, 0\n"
+ " wsr %0, scompare1\n"
+ " movi %0, 1\n"
+ " s32c1i %0, %1, 0\n"
+ : "=&a" (tmp)
+ : "a" (&lock->slock)
+ : "memory");
+
+ return tmp == 0 ? 1 : 0;
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ " movi %0, 0\n"
+ " s32ri %0, %1, 0\n"
+ : "=&a" (tmp)
+ : "a" (&lock->slock)
+ : "memory");
+}
+
+/*
+ * rwlock
+ *
+ * Read-write locks are really a more flexible spinlock. They allow
+ * multiple readers but only one writer. Write ownership is exclusive
+ * (i.e., all other readers and writers are blocked from ownership while
+ * there is a write owner). These rwlocks are unfair to writers. Writers
+ * can be starved for an indefinite time by readers.
+ *
+ * possible values:
+ *
+ * 0 nobody owns the rwlock
+ * >0 one or more readers own the rwlock
+ * (the positive value is the actual number of readers)
+ * 0x80000000 one writer owns the rwlock, no other writers, no readers
+ */
+
+#define __raw_write_can_lock(x) ((x)->lock == 0)
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ " movi %0, 0\n"
+ " wsr %0, scompare1\n"
+ "1: movi %0, 1\n"
+ " slli %0, %0, 31\n"
+ " s32c1i %0, %1, 0\n"
+ " bnez %0, 1b\n"
+ : "=&a" (tmp)
+ : "a" (&rw->lock)
+ : "memory");
+}
+
+/* Returns 1 if the lock is obtained, 0 otherwise. */
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ " movi %0, 0\n"
+ " wsr %0, scompare1\n"
+ " movi %0, 1\n"
+ " slli %0, %0, 31\n"
+ " s32c1i %0, %1, 0\n"
+ : "=&a" (tmp)
+ : "a" (&rw->lock)
+ : "memory");
+
+ return tmp == 0 ? 1 : 0;
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ " movi %0, 0\n"
+ " s32ri %0, %1, 0\n"
+ : "=&a" (tmp)
+ : "a" (&rw->lock)
+ : "memory");
+}
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+ unsigned long tmp;
+ unsigned long result;
+
+ __asm__ __volatile__(
+ "1: l32i %1, %2, 0\n"
+ " bltz %1, 1b\n"
+ " wsr %1, scompare1\n"
+ " addi %0, %1, 1\n"
+ " s32c1i %0, %2, 0\n"
+ " bne %0, %1, 1b\n"
+ : "=&a" (result), "=&a" (tmp)
+ : "a" (&rw->lock)
+ : "memory");
+}
+
+/* Returns 1 if the lock is obtained, 0 otherwise. */
+
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+ unsigned long result;
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ " l32i %1, %2, 0\n"
+ " addi %0, %1, 1\n"
+ " bltz %0, 1f\n"
+ " wsr %1, scompare1\n"
+ " s32c1i %0, %2, 0\n"
+ " sub %0, %0, %1\n"
+ "1:\n"
+ : "=&a" (result), "=&a" (tmp)
+ : "a" (&rw->lock)
+ : "memory");
+
+ return result == 0;
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+ unsigned long tmp1, tmp2;
+
+ __asm__ __volatile__(
+ "1: l32i %1, %2, 0\n"
+ " addi %0, %1, -1\n"
+ " wsr %1, scompare1\n"
+ " s32c1i %0, %2, 0\n"
+ " bne %0, %1, 1b\n"
+ : "=&a" (tmp1), "=&a" (tmp2)
+ : "a" (&rw->lock)
+ : "memory");
+}
#endif /* _XTENSA_SPINLOCK_H */
diff --git a/arch/xtensa/include/asm/syscall.h b/arch/xtensa/include/asm/syscall.h
index b00c928..8d5e47f 100644
--- a/arch/xtensa/include/asm/syscall.h
+++ b/arch/xtensa/include/asm/syscall.h
@@ -25,9 +25,10 @@
/* Should probably move to linux/syscalls.h */
struct pollfd;
asmlinkage long sys_pselect6(int n, fd_set __user *inp, fd_set __user *outp,
- fd_set __user *exp, struct timespec __user *tsp, void __user *sig);
+ fd_set __user *exp, struct timespec __user *tsp,
+ void __user *sig);
asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
- struct timespec __user *tsp, const sigset_t __user *sigmask,
- size_t sigsetsize);
-asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
- size_t sigsetsize);
+ struct timespec __user *tsp,
+ const sigset_t __user *sigmask,
+ size_t sigsetsize);
+asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize);
diff --git a/arch/xtensa/include/asm/traps.h b/arch/xtensa/include/asm/traps.h
new file mode 100644
index 0000000..54f7044
--- /dev/null
+++ b/arch/xtensa/include/asm/traps.h
@@ -0,0 +1,23 @@
+/*
+ * arch/xtensa/include/asm/traps.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012 Tensilica Inc.
+ */
+#ifndef _XTENSA_TRAPS_H
+#define _XTENSA_TRAPS_H
+
+#include <asm/ptrace.h>
+
+/*
+ * handler must be either of the following:
+ * void (*)(struct pt_regs *regs);
+ * void (*)(struct pt_regs *regs, unsigned long exccause);
+ */
+extern void * __init trap_set_handler(int cause, void *handler);
+extern void do_unhandled(struct pt_regs *regs, unsigned long exccause);
+
+#endif /* _XTENSA_TRAPS_H */
diff --git a/arch/xtensa/include/asm/uaccess.h b/arch/xtensa/include/asm/uaccess.h
index 6e4bb3b..fd686dc 100644
--- a/arch/xtensa/include/asm/uaccess.h
+++ b/arch/xtensa/include/asm/uaccess.h
@@ -180,7 +180,8 @@
#define segment_eq(a,b) ((a).seg == (b).seg)
#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
-#define __user_ok(addr,size) (((size) <= TASK_SIZE)&&((addr) <= TASK_SIZE-(size)))
+#define __user_ok(addr,size) \
+ (((size) <= TASK_SIZE)&&((addr) <= TASK_SIZE-(size)))
#define __access_ok(addr,size) (__kernel_ok || __user_ok((addr),(size)))
#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size))
@@ -234,10 +235,10 @@
int __cb; \
retval = 0; \
switch (size) { \
- case 1: __put_user_asm(x,ptr,retval,1,"s8i",__cb); break; \
- case 2: __put_user_asm(x,ptr,retval,2,"s16i",__cb); break; \
- case 4: __put_user_asm(x,ptr,retval,4,"s32i",__cb); break; \
- case 8: { \
+ case 1: __put_user_asm(x,ptr,retval,1,"s8i",__cb); break; \
+ case 2: __put_user_asm(x,ptr,retval,2,"s16i",__cb); break; \
+ case 4: __put_user_asm(x,ptr,retval,4,"s32i",__cb); break; \
+ case 8: { \
__typeof__(*ptr) __v64 = x; \
retval = __copy_to_user(ptr,&__v64,8); \
break; \
@@ -291,7 +292,7 @@
* __check_align_* macros still work.
*/
#define __put_user_asm(x, addr, err, align, insn, cb) \
- __asm__ __volatile__( \
+__asm__ __volatile__( \
__check_align_##align \
"1: "insn" %2, %3, 0 \n" \
"2: \n" \
@@ -301,8 +302,8 @@
" .long 2b \n" \
"5: \n" \
" l32r %1, 4b \n" \
- " movi %0, %4 \n" \
- " jx %1 \n" \
+ " movi %0, %4 \n" \
+ " jx %1 \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" .long 1b, 5b \n" \
@@ -334,13 +335,13 @@
do { \
int __cb; \
retval = 0; \
- switch (size) { \
- case 1: __get_user_asm(x,ptr,retval,1,"l8ui",__cb); break; \
- case 2: __get_user_asm(x,ptr,retval,2,"l16ui",__cb); break; \
- case 4: __get_user_asm(x,ptr,retval,4,"l32i",__cb); break; \
- case 8: retval = __copy_from_user(&x,ptr,8); break; \
- default: (x) = __get_user_bad(); \
- } \
+ switch (size) { \
+ case 1: __get_user_asm(x,ptr,retval,1,"l8ui",__cb); break; \
+ case 2: __get_user_asm(x,ptr,retval,2,"l16ui",__cb); break; \
+ case 4: __get_user_asm(x,ptr,retval,4,"l32i",__cb); break; \
+ case 8: retval = __copy_from_user(&x,ptr,8); break; \
+ default: (x) = __get_user_bad(); \
+ } \
} while (0)
@@ -349,7 +350,7 @@
* __check_align_* macros still work.
*/
#define __get_user_asm(x, addr, err, align, insn, cb) \
- __asm__ __volatile__( \
+__asm__ __volatile__( \
__check_align_##align \
"1: "insn" %2, %3, 0 \n" \
"2: \n" \
@@ -360,8 +361,8 @@
"5: \n" \
" l32r %1, 4b \n" \
" movi %2, 0 \n" \
- " movi %0, %4 \n" \
- " jx %1 \n" \
+ " movi %0, %4 \n" \
+ " jx %1 \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" .long 1b, 5b \n" \
@@ -421,8 +422,10 @@
#define copy_to_user(to,from,n) __generic_copy_to_user((to),(from),(n))
#define copy_from_user(to,from,n) __generic_copy_from_user((to),(from),(n))
-#define __copy_to_user(to,from,n) __generic_copy_to_user_nocheck((to),(from),(n))
-#define __copy_from_user(to,from,n) __generic_copy_from_user_nocheck((to),(from),(n))
+#define __copy_to_user(to,from,n) \
+ __generic_copy_to_user_nocheck((to),(from),(n))
+#define __copy_from_user(to,from,n) \
+ __generic_copy_from_user_nocheck((to),(from),(n))
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
index f36cef5..c3a59d9 100644
--- a/arch/xtensa/kernel/Makefile
+++ b/arch/xtensa/kernel/Makefile
@@ -23,13 +23,13 @@
#
# Replicate rules in scripts/Makefile.build
-sed-y = -e 's/\*(\(\.[a-z]*it\|\.ref\|\)\.text)/*(\1.literal \1.text)/g' \
- -e 's/\.text\.unlikely/.literal.unlikely .text.unlikely/g' \
+sed-y = -e 's/\*(\(\.[a-z]*it\|\.ref\|\)\.text)/*(\1.literal \1.text)/g' \
+ -e 's/\.text\.unlikely/.literal.unlikely .text.unlikely/g' \
-e 's/\*(\(\.text\.[a-z]*\))/*(\1.literal \1)/g'
quiet_cmd__cpp_lds_S = LDS $@
- cmd__cpp_lds_S = $(CPP) $(cpp_flags) -P -C -Uxtensa -D__ASSEMBLY__ $< \
- | sed $(sed-y) >$@
+cmd__cpp_lds_S = $(CPP) $(cpp_flags) -P -C -Uxtensa -D__ASSEMBLY__ $< \
+ | sed $(sed-y) >$@
$(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE
$(call if_changed_dep,_cpp_lds_S)
diff --git a/arch/xtensa/kernel/align.S b/arch/xtensa/kernel/align.S
index 934ae58..aa2e87b 100644
--- a/arch/xtensa/kernel/align.S
+++ b/arch/xtensa/kernel/align.S
@@ -442,7 +442,7 @@
mov a1, a2
rsr a0, ps
- bbsi.l a2, PS_UM_BIT, 1f # jump if user mode
+ bbsi.l a2, PS_UM_BIT, 1f # jump if user mode
movi a0, _kernel_exception
jx a0
@@ -450,6 +450,6 @@
1: movi a0, _user_exception
jx a0
+ENDPROC(fast_unaligned)
#endif /* XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION */
-
diff --git a/arch/xtensa/kernel/asm-offsets.c b/arch/xtensa/kernel/asm-offsets.c
index 7dc3f91..0701fad 100644
--- a/arch/xtensa/kernel/asm-offsets.c
+++ b/arch/xtensa/kernel/asm-offsets.c
@@ -41,6 +41,7 @@
DEFINE(PT_SAR, offsetof (struct pt_regs, sar));
DEFINE(PT_ICOUNTLEVEL, offsetof (struct pt_regs, icountlevel));
DEFINE(PT_SYSCALL, offsetof (struct pt_regs, syscall));
+ DEFINE(PT_SCOMPARE1, offsetof(struct pt_regs, scompare1));
DEFINE(PT_AREG, offsetof (struct pt_regs, areg[0]));
DEFINE(PT_AREG0, offsetof (struct pt_regs, areg[0]));
DEFINE(PT_AREG1, offsetof (struct pt_regs, areg[1]));
@@ -91,7 +92,8 @@
#endif
DEFINE(THREAD_XTREGS_USER, offsetof (struct thread_info, xtregs_user));
DEFINE(XTREGS_USER_SIZE, sizeof(xtregs_user_t));
- DEFINE(THREAD_CURRENT_DS, offsetof (struct task_struct, thread.current_ds));
+ DEFINE(THREAD_CURRENT_DS, offsetof (struct task_struct, \
+ thread.current_ds));
/* struct mm_struct */
DEFINE(MM_USERS, offsetof(struct mm_struct, mm_users));
@@ -108,4 +110,3 @@
return 0;
}
-
diff --git a/arch/xtensa/kernel/coprocessor.S b/arch/xtensa/kernel/coprocessor.S
index 54c3be3..6476574 100644
--- a/arch/xtensa/kernel/coprocessor.S
+++ b/arch/xtensa/kernel/coprocessor.S
@@ -43,10 +43,13 @@
/* IO protection is currently unsupported. */
ENTRY(fast_io_protect)
+
wsr a0, excsave1
movi a0, unrecoverable_exception
callx0 a0
+ENDPROC(fast_io_protect)
+
#if XTENSA_HAVE_COPROCESSORS
/*
@@ -139,6 +142,7 @@
*/
ENTRY(coprocessor_save)
+
entry a1, 32
s32i a0, a1, 0
movi a0, .Lsave_cp_regs_jump_table
@@ -150,7 +154,10 @@
1: l32i a0, a1, 0
retw
+ENDPROC(coprocessor_save)
+
ENTRY(coprocessor_load)
+
entry a1, 32
s32i a0, a1, 0
movi a0, .Lload_cp_regs_jump_table
@@ -162,8 +169,10 @@
1: l32i a0, a1, 0
retw
+ENDPROC(coprocessor_load)
+
/*
- * coprocessor_flush(struct task_info*, index)
+ * coprocessor_flush(struct task_info*, index)
* a2 a3
* coprocessor_restore(struct task_info*, index)
* a2 a3
@@ -178,6 +187,7 @@
ENTRY(coprocessor_flush)
+
entry a1, 32
s32i a0, a1, 0
movi a0, .Lsave_cp_regs_jump_table
@@ -191,6 +201,8 @@
1: l32i a0, a1, 0
retw
+ENDPROC(coprocessor_flush)
+
ENTRY(coprocessor_restore)
entry a1, 32
s32i a0, a1, 0
@@ -205,6 +217,8 @@
1: l32i a0, a1, 0
retw
+ENDPROC(coprocessor_restore)
+
/*
* Entry condition:
*
@@ -220,10 +234,12 @@
*/
ENTRY(fast_coprocessor_double)
+
wsr a0, excsave1
movi a0, unrecoverable_exception
callx0 a0
+ENDPROC(fast_coprocessor_double)
ENTRY(fast_coprocessor)
@@ -327,9 +343,14 @@
rfe
+ENDPROC(fast_coprocessor)
+
.data
+
ENTRY(coprocessor_owner)
+
.fill XCHAL_CP_MAX, 4, 0
-#endif /* XTENSA_HAVE_COPROCESSORS */
+END(coprocessor_owner)
+#endif /* XTENSA_HAVE_COPROCESSORS */
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 90bfc1d..3777fec 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -219,6 +219,7 @@
j common_exception
+ENDPROC(user_exception)
/*
* First-level exit handler for kernel exceptions
@@ -371,6 +372,13 @@
s32i a2, a1, PT_LBEG
s32i a3, a1, PT_LEND
+ /* Save SCOMPARE1 */
+
+#if XCHAL_HAVE_S32C1I
+ rsr a2, scompare1
+ s32i a2, a1, PT_SCOMPARE1
+#endif
+
/* Save optional registers. */
save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
@@ -432,6 +440,12 @@
load_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
+ /* Restore SCOMPARE1 */
+
+#if XCHAL_HAVE_S32C1I
+ l32i a2, a1, PT_SCOMPARE1
+ wsr a2, scompare1
+#endif
wsr a3, ps /* disable interrupts */
_bbci.l a3, PS_UM_BIT, kernel_exception_exit
@@ -641,6 +655,8 @@
l32i a1, a1, PT_AREG1
rfde
+ENDPROC(kernel_exception)
+
/*
* Debug exception handler.
*
@@ -701,6 +717,7 @@
/* Debug exception while in exception mode. */
1: j 1b // FIXME!!
+ENDPROC(debug_exception)
/*
* We get here in case of an unrecoverable exception.
@@ -751,6 +768,7 @@
1: j 1b
+ENDPROC(unrecoverable_exception)
/* -------------------------- FAST EXCEPTION HANDLERS ----------------------- */
@@ -856,7 +874,7 @@
_bnei a0, 1, 1f # no 'movsp a1, ax': jump
- /* Move the save area. This implies the use of the L32E
+ /* Move the save area. This implies the use of the L32E
* and S32E instructions, because this move must be done with
* the user's PS.RING privilege levels, not with ring 0
* (kernel's) privileges currently active with PS.EXCM
@@ -929,6 +947,7 @@
l32i a2, a2, PT_AREG2
rfe
+ENDPROC(fast_alloca)
/*
* fast system calls.
@@ -966,6 +985,8 @@
j kernel_exception
+ENDPROC(fast_syscall_kernel)
+
ENTRY(fast_syscall_user)
/* Skip syscall. */
@@ -983,19 +1004,21 @@
j user_exception
+ENDPROC(fast_syscall_user)
+
ENTRY(fast_syscall_unrecoverable)
- /* Restore all states. */
+ /* Restore all states. */
- l32i a0, a2, PT_AREG0 # restore a0
- xsr a2, depc # restore a2, depc
- rsr a3, excsave1
+ l32i a0, a2, PT_AREG0 # restore a0
+ xsr a2, depc # restore a2, depc
+ rsr a3, excsave1
- wsr a0, excsave1
- movi a0, unrecoverable_exception
- callx0 a0
+ wsr a0, excsave1
+ movi a0, unrecoverable_exception
+ callx0 a0
-
+ENDPROC(fast_syscall_unrecoverable)
/*
* sysxtensa syscall handler
@@ -1101,7 +1124,7 @@
movi a2, -EINVAL
rfe
-
+ENDPROC(fast_syscall_xtensa)
/* fast_syscall_spill_registers.
@@ -1160,6 +1183,8 @@
movi a2, 0
rfe
+ENDPROC(fast_syscall_spill_registers)
+
/* Fixup handler.
*
* We get here if the spill routine causes an exception, e.g. tlb miss.
@@ -1228,9 +1253,9 @@
movi a3, exc_table
rsr a0, exccause
- addx4 a0, a0, a3 # find entry in table
- l32i a0, a0, EXC_TABLE_FAST_USER # load handler
- jx a0
+ addx4 a0, a0, a3 # find entry in table
+ l32i a0, a0, EXC_TABLE_FAST_USER # load handler
+ jx a0
fast_syscall_spill_registers_fixup_return:
@@ -1432,7 +1457,7 @@
rsr a0, ps
_bbci.l a0, PS_UM_BIT, 1f
- /* User space: Setup a dummy frame and kill application.
+ /* User space: Setup a dummy frame and kill application.
* Note: We assume EXC_TABLE_KSTK contains a valid stack pointer.
*/
@@ -1464,6 +1489,8 @@
callx0 a0 # should not return
1: j 1b
+ENDPROC(_spill_registers)
+
#ifdef CONFIG_MMU
/*
* We should never get here. Bail out!
@@ -1475,6 +1502,8 @@
callx0 a0 # should not return
1: j 1b
+ENDPROC(fast_second_level_miss_double_kernel)
+
/* First-level entry handler for user, kernel, and double 2nd-level
* TLB miss exceptions. Note that for now, user and kernel miss
* exceptions share the same entry point and are handled identically.
@@ -1682,6 +1711,7 @@
j _kernel_exception
1: j _user_exception
+ENDPROC(fast_second_level_miss)
/*
* StoreProhibitedException
@@ -1777,6 +1807,9 @@
bbsi.l a2, PS_UM_BIT, 1f
j _kernel_exception
1: j _user_exception
+
+ENDPROC(fast_store_prohibited)
+
#endif /* CONFIG_MMU */
/*
@@ -1787,6 +1820,7 @@
*/
ENTRY(system_call)
+
entry a1, 32
/* regs->syscall = regs->areg[2] */
@@ -1831,6 +1865,8 @@
callx4 a4
retw
+ENDPROC(system_call)
+
/*
* Task switch.
@@ -1899,6 +1935,7 @@
retw
+ENDPROC(_switch_to)
ENTRY(ret_from_fork)
@@ -1914,6 +1951,8 @@
j common_exception_return
+ENDPROC(ret_from_fork)
+
/*
* Kernel thread creation helper
* On entry, set up by copy_thread: a2 = thread_fn, a3 = thread_fn arg
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index bdc5078..91d9095 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -18,6 +18,7 @@
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cacheasm.h>
+#include <asm/initialize_mmu.h>
#include <linux/init.h>
#include <linux/linkage.h>
@@ -47,16 +48,19 @@
*/
__HEAD
- .globl _start
-_start: _j 2f
+ENTRY(_start)
+
+ _j 2f
.align 4
1: .word _startup
2: l32r a0, 1b
jx a0
+ENDPROC(_start)
+
.section .init.text, "ax"
- .align 4
-_startup:
+
+ENTRY(_startup)
/* Disable interrupts and exceptions. */
@@ -107,7 +111,7 @@
/* Disable all timers. */
.set _index, 0
- .rept XCHAL_NUM_TIMERS - 1
+ .rept XCHAL_NUM_TIMERS
wsr a0, SREG_CCOMPARE + _index
.set _index, _index + 1
.endr
@@ -120,7 +124,7 @@
/* Disable coprocessors. */
-#if XCHAL_CP_NUM > 0
+#if XCHAL_HAVE_CP
wsr a0, cpenable
#endif
@@ -152,6 +156,8 @@
isync
+ initialize_mmu
+
/* Unpack data sections
*
* The linker script used to build the Linux kernel image
@@ -230,6 +236,7 @@
should_never_return:
j should_never_return
+ENDPROC(_startup)
/*
* BSS section
@@ -239,6 +246,8 @@
#ifdef CONFIG_MMU
ENTRY(swapper_pg_dir)
.fill PAGE_SIZE, 1, 0
+END(swapper_pg_dir)
#endif
ENTRY(empty_zero_page)
.fill PAGE_SIZE, 1, 0
+END(empty_zero_page)
diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c
index a6ce3e5..6f4f9749 100644
--- a/arch/xtensa/kernel/irq.c
+++ b/arch/xtensa/kernel/irq.c
@@ -18,6 +18,8 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel_stat.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
#include <asm/uaccess.h>
#include <asm/platform.h>
@@ -26,19 +28,22 @@
atomic_t irq_err_count;
+static struct irq_domain *root_domain;
+
/*
* do_IRQ handles all normal device IRQ's (the special
* SMP cross-CPU interrupts have their own specific
* handlers).
*/
-asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
+asmlinkage void do_IRQ(int hwirq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
+ int irq = irq_find_mapping(root_domain, hwirq);
- if (irq >= NR_IRQS) {
+ if (hwirq >= NR_IRQS) {
printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
- __func__, irq);
+ __func__, hwirq);
}
irq_enter();
@@ -71,40 +76,39 @@
static void xtensa_irq_mask(struct irq_data *d)
{
- cached_irq_mask &= ~(1 << d->irq);
+ cached_irq_mask &= ~(1 << d->hwirq);
set_sr (cached_irq_mask, intenable);
}
static void xtensa_irq_unmask(struct irq_data *d)
{
- cached_irq_mask |= 1 << d->irq;
+ cached_irq_mask |= 1 << d->hwirq;
set_sr (cached_irq_mask, intenable);
}
static void xtensa_irq_enable(struct irq_data *d)
{
- variant_irq_enable(d->irq);
+ variant_irq_enable(d->hwirq);
xtensa_irq_unmask(d);
}
static void xtensa_irq_disable(struct irq_data *d)
{
xtensa_irq_mask(d);
- variant_irq_disable(d->irq);
+ variant_irq_disable(d->hwirq);
}
static void xtensa_irq_ack(struct irq_data *d)
{
- set_sr(1 << d->irq, intclear);
+ set_sr(1 << d->hwirq, intclear);
}
static int xtensa_irq_retrigger(struct irq_data *d)
{
- set_sr (1 << d->irq, INTSET);
+ set_sr(1 << d->hwirq, intset);
return 1;
}
-
static struct irq_chip xtensa_irq_chip = {
.name = "xtensa",
.irq_enable = xtensa_irq_enable,
@@ -115,37 +119,99 @@
.irq_retrigger = xtensa_irq_retrigger,
};
+static int xtensa_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ u32 mask = 1 << hw;
+
+ if (mask & XCHAL_INTTYPE_MASK_SOFTWARE) {
+ irq_set_chip_and_handler_name(irq, &xtensa_irq_chip,
+ handle_simple_irq, "level");
+ irq_set_status_flags(irq, IRQ_LEVEL);
+ } else if (mask & XCHAL_INTTYPE_MASK_EXTERN_EDGE) {
+ irq_set_chip_and_handler_name(irq, &xtensa_irq_chip,
+ handle_edge_irq, "edge");
+ irq_clear_status_flags(irq, IRQ_LEVEL);
+ } else if (mask & XCHAL_INTTYPE_MASK_EXTERN_LEVEL) {
+ irq_set_chip_and_handler_name(irq, &xtensa_irq_chip,
+ handle_level_irq, "level");
+ irq_set_status_flags(irq, IRQ_LEVEL);
+ } else if (mask & XCHAL_INTTYPE_MASK_TIMER) {
+ irq_set_chip_and_handler_name(irq, &xtensa_irq_chip,
+ handle_edge_irq, "edge");
+ irq_clear_status_flags(irq, IRQ_LEVEL);
+ } else {/* XCHAL_INTTYPE_MASK_WRITE_ERROR */
+ /* XCHAL_INTTYPE_MASK_NMI */
+
+ irq_set_chip_and_handler_name(irq, &xtensa_irq_chip,
+ handle_level_irq, "level");
+ irq_set_status_flags(irq, IRQ_LEVEL);
+ }
+ return 0;
+}
+
+static unsigned map_ext_irq(unsigned ext_irq)
+{
+ unsigned mask = XCHAL_INTTYPE_MASK_EXTERN_EDGE |
+ XCHAL_INTTYPE_MASK_EXTERN_LEVEL;
+ unsigned i;
+
+ for (i = 0; mask; ++i, mask >>= 1) {
+ if ((mask & 1) && ext_irq-- == 0)
+ return i;
+ }
+ return XCHAL_NUM_INTERRUPTS;
+}
+
+/*
+ * Device Tree IRQ specifier translation function which works with one or
+ * two cell bindings. First cell value maps directly to the hwirq number.
+ * Second cell if present specifies whether hwirq number is external (1) or
+ * internal (0).
+ */
+int xtensa_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ if (WARN_ON(intsize < 1 || intsize > 2))
+ return -EINVAL;
+ if (intsize == 2 && intspec[1] == 1) {
+ unsigned int_irq = map_ext_irq(intspec[0]);
+ if (int_irq < XCHAL_NUM_INTERRUPTS)
+ *out_hwirq = int_irq;
+ else
+ return -EINVAL;
+ } else {
+ *out_hwirq = intspec[0];
+ }
+ *out_type = IRQ_TYPE_NONE;
+ return 0;
+}
+
+static const struct irq_domain_ops xtensa_irq_domain_ops = {
+ .xlate = xtensa_irq_domain_xlate,
+ .map = xtensa_irq_map,
+};
+
void __init init_IRQ(void)
{
- int index;
-
- for (index = 0; index < XTENSA_NR_IRQS; index++) {
- int mask = 1 << index;
-
- if (mask & XCHAL_INTTYPE_MASK_SOFTWARE)
- irq_set_chip_and_handler(index, &xtensa_irq_chip,
- handle_simple_irq);
-
- else if (mask & XCHAL_INTTYPE_MASK_EXTERN_EDGE)
- irq_set_chip_and_handler(index, &xtensa_irq_chip,
- handle_edge_irq);
-
- else if (mask & XCHAL_INTTYPE_MASK_EXTERN_LEVEL)
- irq_set_chip_and_handler(index, &xtensa_irq_chip,
- handle_level_irq);
-
- else if (mask & XCHAL_INTTYPE_MASK_TIMER)
- irq_set_chip_and_handler(index, &xtensa_irq_chip,
- handle_edge_irq);
-
- else /* XCHAL_INTTYPE_MASK_WRITE_ERROR */
- /* XCHAL_INTTYPE_MASK_NMI */
-
- irq_set_chip_and_handler(index, &xtensa_irq_chip,
- handle_level_irq);
- }
+ struct device_node *intc = NULL;
cached_irq_mask = 0;
+ set_sr(~0, intclear);
+
+#ifdef CONFIG_OF
+ /* The interrupt controller device node is mandatory */
+ intc = of_find_compatible_node(NULL, NULL, "xtensa,pic");
+ BUG_ON(!intc);
+
+ root_domain = irq_domain_add_linear(intc, NR_IRQS,
+ &xtensa_irq_domain_ops, NULL);
+#else
+ root_domain = irq_domain_add_legacy(intc, NR_IRQS, 0, 0,
+ &xtensa_irq_domain_ops, NULL);
+#endif
+ irq_set_default_host(root_domain);
variant_init_irq();
}
diff --git a/arch/xtensa/kernel/module.c b/arch/xtensa/kernel/module.c
index 451dda92..b715237 100644
--- a/arch/xtensa/kernel/module.c
+++ b/arch/xtensa/kernel/module.c
@@ -53,7 +53,7 @@
struct module *mod)
{
unsigned int i;
- Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
Elf32_Sym *sym;
unsigned char *location;
uint32_t value;
diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c
index 97230e4..44bf21c3 100644
--- a/arch/xtensa/kernel/platform.c
+++ b/arch/xtensa/kernel/platform.c
@@ -44,4 +44,3 @@
ccount_per_jiffy = 10 * (1000000UL/HZ);
});
#endif
-
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index 1accf28..0dd5784 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -108,7 +108,7 @@
void cpu_idle(void)
{
- local_irq_enable();
+ local_irq_enable();
/* endless idle loop with no priority at all */
while (1) {
diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c
index 33eea4c1..61fb2e9 100644
--- a/arch/xtensa/kernel/ptrace.c
+++ b/arch/xtensa/kernel/ptrace.c
@@ -154,7 +154,7 @@
coprocessor_flush_all(ti);
coprocessor_release_all(ti);
- ret |= __copy_from_user(&ti->xtregs_cp, &xtregs->cp0,
+ ret |= __copy_from_user(&ti->xtregs_cp, &xtregs->cp0,
sizeof(xtregs_coprocessor_t));
#endif
ret |= __copy_from_user(®s->xtregs_opt, &xtregs->opt,
@@ -343,4 +343,3 @@
&& (current->ptrace & PT_PTRACED))
do_syscall_trace();
}
-
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index b237988..24c1a57 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -22,6 +22,11 @@
#include <linux/bootmem.h>
#include <linux/kernel.h>
+#ifdef CONFIG_OF
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#endif
+
#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
# include <linux/console.h>
#endif
@@ -42,6 +47,7 @@
#include <asm/page.h>
#include <asm/setup.h>
#include <asm/param.h>
+#include <asm/traps.h>
#include <platform/hardware.h>
@@ -64,6 +70,11 @@
extern int initrd_below_start_ok;
#endif
+#ifdef CONFIG_OF
+extern u32 __dtb_start[];
+void *dtb_start = __dtb_start;
+#endif
+
unsigned char aux_device_present;
extern unsigned long loops_per_jiffy;
@@ -83,6 +94,8 @@
static inline void init_mmu(void) { }
#endif
+extern int mem_reserve(unsigned long, unsigned long, int);
+extern void bootmem_init(void);
extern void zones_init(void);
/*
@@ -104,26 +117,31 @@
/* parse current tag */
+static int __init add_sysmem_bank(unsigned long type, unsigned long start,
+ unsigned long end)
+{
+ if (sysmem.nr_banks >= SYSMEM_BANKS_MAX) {
+ printk(KERN_WARNING
+ "Ignoring memory bank 0x%08lx size %ldKB\n",
+ start, end - start);
+ return -EINVAL;
+ }
+ sysmem.bank[sysmem.nr_banks].type = type;
+ sysmem.bank[sysmem.nr_banks].start = PAGE_ALIGN(start);
+ sysmem.bank[sysmem.nr_banks].end = end & PAGE_MASK;
+ sysmem.nr_banks++;
+
+ return 0;
+}
+
static int __init parse_tag_mem(const bp_tag_t *tag)
{
- meminfo_t *mi = (meminfo_t*)(tag->data);
+ meminfo_t *mi = (meminfo_t *)(tag->data);
if (mi->type != MEMORY_TYPE_CONVENTIONAL)
return -1;
- if (sysmem.nr_banks >= SYSMEM_BANKS_MAX) {
- printk(KERN_WARNING
- "Ignoring memory bank 0x%08lx size %ldKB\n",
- (unsigned long)mi->start,
- (unsigned long)mi->end - (unsigned long)mi->start);
- return -EINVAL;
- }
- sysmem.bank[sysmem.nr_banks].type = mi->type;
- sysmem.bank[sysmem.nr_banks].start = PAGE_ALIGN(mi->start);
- sysmem.bank[sysmem.nr_banks].end = mi->end & PAGE_MASK;
- sysmem.nr_banks++;
-
- return 0;
+ return add_sysmem_bank(mi->type, mi->start, mi->end);
}
__tagtable(BP_TAG_MEMORY, parse_tag_mem);
@@ -142,12 +160,31 @@
__tagtable(BP_TAG_INITRD, parse_tag_initrd);
+#ifdef CONFIG_OF
+
+static int __init parse_tag_fdt(const bp_tag_t *tag)
+{
+ dtb_start = (void *)(tag->data[0]);
+ return 0;
+}
+
+__tagtable(BP_TAG_FDT, parse_tag_fdt);
+
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+ unsigned long end)
+{
+ initrd_start = (void *)__va(start);
+ initrd_end = (void *)__va(end);
+ initrd_below_start_ok = 1;
+}
+
+#endif /* CONFIG_OF */
+
#endif /* CONFIG_BLK_DEV_INITRD */
static int __init parse_tag_cmdline(const bp_tag_t* tag)
{
- strncpy(command_line, (char*)(tag->data), COMMAND_LINE_SIZE);
- command_line[COMMAND_LINE_SIZE - 1] = '\0';
+ strlcpy(command_line, (char *)(tag->data), COMMAND_LINE_SIZE);
return 0;
}
@@ -185,6 +222,58 @@
return 0;
}
+#ifdef CONFIG_OF
+
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+ size &= PAGE_MASK;
+ add_sysmem_bank(MEMORY_TYPE_CONVENTIONAL, base, base + size);
+}
+
+void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+ return __alloc_bootmem(size, align, 0);
+}
+
+void __init early_init_devtree(void *params)
+{
+ /* Setup flat device-tree pointer */
+ initial_boot_params = params;
+
+ /* Retrieve various informations from the /chosen node of the
+ * device-tree, including the platform type, initrd location and
+ * size, TCE reserve, and more ...
+ */
+ if (!command_line[0])
+ of_scan_flat_dt(early_init_dt_scan_chosen, command_line);
+
+ /* Scan memory nodes and rebuild MEMBLOCKs */
+ of_scan_flat_dt(early_init_dt_scan_root, NULL);
+ if (sysmem.nr_banks == 0)
+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+}
+
+static void __init copy_devtree(void)
+{
+ void *alloc = early_init_dt_alloc_memory_arch(
+ be32_to_cpu(initial_boot_params->totalsize), 0);
+ if (alloc) {
+ memcpy(alloc, initial_boot_params,
+ be32_to_cpu(initial_boot_params->totalsize));
+ initial_boot_params = alloc;
+ }
+}
+
+static int __init xtensa_device_probe(void)
+{
+ of_platform_populate(NULL, NULL, NULL, NULL);
+ return 0;
+}
+
+device_initcall(xtensa_device_probe);
+
+#endif /* CONFIG_OF */
+
/*
* Initialize architecture. (Early stage)
*/
@@ -193,14 +282,14 @@
{
sysmem.nr_banks = 0;
-#ifdef CONFIG_CMDLINE_BOOL
- strcpy(command_line, default_command_line);
-#endif
-
/* Parse boot parameters */
- if (bp_start)
- parse_bootparam(bp_start);
+ if (bp_start)
+ parse_bootparam(bp_start);
+
+#ifdef CONFIG_OF
+ early_init_devtree(dtb_start);
+#endif
if (sysmem.nr_banks == 0) {
sysmem.nr_banks = 1;
@@ -209,6 +298,11 @@
+ PLATFORM_DEFAULT_MEM_SIZE;
}
+#ifdef CONFIG_CMDLINE_BOOL
+ if (!command_line[0])
+ strlcpy(command_line, default_command_line, COMMAND_LINE_SIZE);
+#endif
+
/* Early hook for platforms */
platform_init(bp_start);
@@ -235,15 +329,130 @@
extern char _DoubleExceptionVector_literal_start;
extern char _DoubleExceptionVector_text_end;
+
+#ifdef CONFIG_S32C1I_SELFTEST
+#if XCHAL_HAVE_S32C1I
+
+static int __initdata rcw_word, rcw_probe_pc, rcw_exc;
+
+/*
+ * Basic atomic compare-and-swap, that records PC of S32C1I for probing.
+ *
+ * If *v == cmp, set *v = set. Return previous *v.
+ */
+static inline int probed_compare_swap(int *v, int cmp, int set)
+{
+ int tmp;
+
+ __asm__ __volatile__(
+ " movi %1, 1f\n"
+ " s32i %1, %4, 0\n"
+ " wsr %2, scompare1\n"
+ "1: s32c1i %0, %3, 0\n"
+ : "=a" (set), "=&a" (tmp)
+ : "a" (cmp), "a" (v), "a" (&rcw_probe_pc), "0" (set)
+ : "memory"
+ );
+ return set;
+}
+
+/* Handle probed exception */
+
+void __init do_probed_exception(struct pt_regs *regs, unsigned long exccause)
+{
+ if (regs->pc == rcw_probe_pc) { /* exception on s32c1i ? */
+ regs->pc += 3; /* skip the s32c1i instruction */
+ rcw_exc = exccause;
+ } else {
+ do_unhandled(regs, exccause);
+ }
+}
+
+/* Simple test of S32C1I (soc bringup assist) */
+
+void __init check_s32c1i(void)
+{
+ int n, cause1, cause2;
+ void *handbus, *handdata, *handaddr; /* temporarily saved handlers */
+
+ rcw_probe_pc = 0;
+ handbus = trap_set_handler(EXCCAUSE_LOAD_STORE_ERROR,
+ do_probed_exception);
+ handdata = trap_set_handler(EXCCAUSE_LOAD_STORE_DATA_ERROR,
+ do_probed_exception);
+ handaddr = trap_set_handler(EXCCAUSE_LOAD_STORE_ADDR_ERROR,
+ do_probed_exception);
+
+ /* First try an S32C1I that does not store: */
+ rcw_exc = 0;
+ rcw_word = 1;
+ n = probed_compare_swap(&rcw_word, 0, 2);
+ cause1 = rcw_exc;
+
+ /* took exception? */
+ if (cause1 != 0) {
+ /* unclean exception? */
+ if (n != 2 || rcw_word != 1)
+ panic("S32C1I exception error");
+ } else if (rcw_word != 1 || n != 1) {
+ panic("S32C1I compare error");
+ }
+
+ /* Then an S32C1I that stores: */
+ rcw_exc = 0;
+ rcw_word = 0x1234567;
+ n = probed_compare_swap(&rcw_word, 0x1234567, 0xabcde);
+ cause2 = rcw_exc;
+
+ if (cause2 != 0) {
+ /* unclean exception? */
+ if (n != 0xabcde || rcw_word != 0x1234567)
+ panic("S32C1I exception error (b)");
+ } else if (rcw_word != 0xabcde || n != 0x1234567) {
+ panic("S32C1I store error");
+ }
+
+ /* Verify consistency of exceptions: */
+ if (cause1 || cause2) {
+ pr_warn("S32C1I took exception %d, %d\n", cause1, cause2);
+ /* If emulation of S32C1I upon bus error gets implemented,
+ we can get rid of this panic for single core (not SMP) */
+ panic("S32C1I exceptions not currently supported");
+ }
+ if (cause1 != cause2)
+ panic("inconsistent S32C1I exceptions");
+
+ trap_set_handler(EXCCAUSE_LOAD_STORE_ERROR, handbus);
+ trap_set_handler(EXCCAUSE_LOAD_STORE_DATA_ERROR, handdata);
+ trap_set_handler(EXCCAUSE_LOAD_STORE_ADDR_ERROR, handaddr);
+}
+
+#else /* XCHAL_HAVE_S32C1I */
+
+/* This condition should not occur with a commercially deployed processor.
+ Display reminder for early engr test or demo chips / FPGA bitstreams */
+void __init check_s32c1i(void)
+{
+ pr_warn("Processor configuration lacks atomic compare-and-swap support!\n");
+}
+
+#endif /* XCHAL_HAVE_S32C1I */
+#else /* CONFIG_S32C1I_SELFTEST */
+
+void __init check_s32c1i(void)
+{
+}
+
+#endif /* CONFIG_S32C1I_SELFTEST */
+
+
void __init setup_arch(char **cmdline_p)
{
- extern int mem_reserve(unsigned long, unsigned long, int);
- extern void bootmem_init(void);
-
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
+ strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
+ check_s32c1i();
+
/* Reserve some memory regions */
#ifdef CONFIG_BLK_DEV_INITRD
@@ -251,7 +460,7 @@
initrd_is_mapped = mem_reserve(__pa(initrd_start),
__pa(initrd_end), 0);
initrd_below_start_ok = 1;
- } else {
+ } else {
initrd_start = 0;
}
#endif
@@ -275,8 +484,12 @@
bootmem_init();
- platform_setup(cmdline_p);
+#ifdef CONFIG_OF
+ copy_devtree();
+ unflatten_device_tree();
+#endif
+ platform_setup(cmdline_p);
paging_init();
zones_init();
@@ -326,7 +539,7 @@
"core ID\t\t: " XCHAL_CORE_ID "\n"
"build ID\t: 0x%x\n"
"byte order\t: %s\n"
- "cpu MHz\t\t: %lu.%02lu\n"
+ "cpu MHz\t\t: %lu.%02lu\n"
"bogomips\t: %lu.%02lu\n",
XCHAL_BUILD_UNIQUE_ID,
XCHAL_HAVE_BE ? "big" : "little",
@@ -381,6 +594,9 @@
#if XCHAL_HAVE_FP
"fpu "
#endif
+#if XCHAL_HAVE_S32C1I
+ "s32c1i "
+#endif
"\n");
/* Registers. */
@@ -412,7 +628,7 @@
"icache size\t: %d\n"
"icache flags\t: "
#if XCHAL_ICACHE_LINE_LOCKABLE
- "lock"
+ "lock "
#endif
"\n"
"dcache line size: %d\n"
@@ -420,10 +636,10 @@
"dcache size\t: %d\n"
"dcache flags\t: "
#if XCHAL_DCACHE_IS_WRITEBACK
- "writeback"
+ "writeback "
#endif
#if XCHAL_DCACHE_LINE_LOCKABLE
- "lock"
+ "lock "
#endif
"\n",
XCHAL_ICACHE_LINESIZE,
@@ -465,4 +681,3 @@
};
#endif /* CONFIG_PROC_FS */
-
diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
index 63c566f..de34d6b 100644
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -212,7 +212,7 @@
if (err)
return err;
- /* The signal handler may have used coprocessors in which
+ /* The signal handler may have used coprocessors in which
* case they are still enabled. We disable them to force a
* reloading of the original task's CP state by the lazy
* context-switching mechanisms of CP exception handling.
@@ -396,7 +396,7 @@
*/
/* Set up registers for signal handler */
- start_thread(regs, (unsigned long) ka->sa.sa_handler,
+ start_thread(regs, (unsigned long) ka->sa.sa_handler,
(unsigned long) frame);
/* Set up a stack frame for a call4
@@ -424,9 +424,9 @@
return -EFAULT;
}
-asmlinkage long xtensa_sigaltstack(const stack_t __user *uss,
+asmlinkage long xtensa_sigaltstack(const stack_t __user *uss,
stack_t __user *uoss,
- long a2, long a3, long a4, long a5,
+ long a2, long a3, long a4, long a5,
struct pt_regs *regs)
{
return do_sigaltstack(uss, uoss, regs->areg[1]);
diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c
index 5702065f..54fa842 100644
--- a/arch/xtensa/kernel/syscall.c
+++ b/arch/xtensa/kernel/syscall.c
@@ -52,4 +52,3 @@
{
return sys_fadvise64_64(fd, offset, len, advice);
}
-
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index ac62f9c..ffb4741 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -22,6 +22,7 @@
#include <linux/irq.h>
#include <linux/profile.h>
#include <linux/delay.h>
+#include <linux/irqdomain.h>
#include <asm/timex.h>
#include <asm/platform.h>
@@ -31,7 +32,7 @@
unsigned long nsec_per_ccount; /* nsec per ccount increment */
#endif
-static cycle_t ccount_read(void)
+static cycle_t ccount_read(struct clocksource *cs)
{
return (cycle_t)get_ccount();
}
@@ -52,6 +53,7 @@
void __init time_init(void)
{
+ unsigned int irq;
#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
printk("Calibrating CPU frequency ");
platform_calibrate_ccount();
@@ -62,7 +64,8 @@
/* Initialize the linux timer interrupt. */
- setup_irq(LINUX_TIMER_INT, &timer_irqaction);
+ irq = irq_create_mapping(NULL, LINUX_TIMER_INT);
+ setup_irq(irq, &timer_irqaction);
set_linux_timer(get_ccount() + CCOUNT_PER_JIFFY);
}
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index 5caf2b6..01e0111 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -293,6 +293,17 @@
}
+/* Set exception C handler - for temporary use when probing exceptions */
+
+void * __init trap_set_handler(int cause, void *handler)
+{
+ unsigned long *entry = &exc_table[EXC_TABLE_DEFAULT / 4 + cause];
+ void *previous = (void *)*entry;
+ *entry = (unsigned long)handler;
+ return previous;
+}
+
+
/*
* Initialize dispatch tables.
*
@@ -397,7 +408,8 @@
"wsr a13, sar\n\t"
"wsr a14, ps\n\t"
:: "a" (&a0), "a" (&ps)
- : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15", "memory");
+ : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15",
+ "memory");
}
void show_trace(struct task_struct *task, unsigned long *sp)
@@ -452,7 +464,7 @@
if (!sp)
sp = stack_pointer(task);
- stack = sp;
+ stack = sp;
printk("\nStack: ");
@@ -523,5 +535,3 @@
do_exit(err);
}
-
-
diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S
index 4462c1e..68df35f 100644
--- a/arch/xtensa/kernel/vectors.S
+++ b/arch/xtensa/kernel/vectors.S
@@ -79,6 +79,8 @@
l32i a0, a0, EXC_TABLE_FAST_USER # load handler
jx a0
+ENDPROC(_UserExceptionVector)
+
/*
* Kernel exception vector. (Exceptions with PS.UM == 0, PS.EXCM == 0)
*
@@ -103,6 +105,7 @@
l32i a0, a0, EXC_TABLE_FAST_KERNEL # load handler address
jx a0
+ENDPROC(_KernelExceptionVector)
/*
* Double exception vector (Exceptions with PS.EXCM == 1)
@@ -225,7 +228,13 @@
/* Window overflow/underflow exception. Get stack pointer. */
mov a3, a2
- movi a2, exc_table
+ /* This explicit literal and the following references to it are made
+ * in order to fit DoubleExceptionVector.literals into the available
+ * 16-byte gap before DoubleExceptionVector.text in the absence of
+ * link time relaxation. See kernel/vmlinux.lds.S
+ */
+ .literal .Lexc_table, exc_table
+ l32r a2, .Lexc_table
l32i a2, a2, EXC_TABLE_KSTK
/* Check for overflow/underflow exception, jump if overflow. */
@@ -255,7 +264,7 @@
s32i a0, a2, PT_AREG0
wsr a3, excsave1 # save a3
- movi a3, exc_table
+ l32r a3, .Lexc_table
rsr a0, exccause
s32i a0, a2, PT_DEPC # mark it as a regular exception
@@ -267,7 +276,7 @@
/* a0: depc, a1: a1, a2: a2, a3: trashed, depc: a0, excsave1: a3 */
- movi a3, exc_table
+ l32r a3, .Lexc_table
s32i a2, a3, EXC_TABLE_DOUBLE_SAVE # temporary variable
/* Enter critical section. */
@@ -296,7 +305,7 @@
/* a0: avail, a1: a1, a2: kstk, a3: avail, depc: a2, excsave: a3 */
- movi a3, exc_table
+ l32r a3, .Lexc_table
rsr a0, exccause
addx4 a0, a0, a3
l32i a0, a0, EXC_TABLE_FAST_USER
@@ -338,6 +347,7 @@
.end literal_prefix
+ENDPROC(_DoubleExceptionVector)
/*
* Debug interrupt vector
@@ -349,9 +359,11 @@
.section .DebugInterruptVector.text, "ax"
ENTRY(_DebugInterruptVector)
+
xsr a0, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
jx a0
+ENDPROC(_DebugInterruptVector)
/* Window overflow and underflow handlers.
@@ -363,38 +375,43 @@
* we try to access any page that would cause a page fault early.
*/
+#define ENTRY_ALIGN64(name) \
+ .globl name; \
+ .align 64; \
+ name:
+
.section .WindowVectors.text, "ax"
/* 4-Register Window Overflow Vector (Handler) */
- .align 64
-.global _WindowOverflow4
-_WindowOverflow4:
+ENTRY_ALIGN64(_WindowOverflow4)
+
s32e a0, a5, -16
s32e a1, a5, -12
s32e a2, a5, -8
s32e a3, a5, -4
rfwo
+ENDPROC(_WindowOverflow4)
+
/* 4-Register Window Underflow Vector (Handler) */
- .align 64
-.global _WindowUnderflow4
-_WindowUnderflow4:
+ENTRY_ALIGN64(_WindowUnderflow4)
+
l32e a0, a5, -16
l32e a1, a5, -12
l32e a2, a5, -8
l32e a3, a5, -4
rfwu
+ENDPROC(_WindowUnderflow4)
/* 8-Register Window Overflow Vector (Handler) */
- .align 64
-.global _WindowOverflow8
-_WindowOverflow8:
+ENTRY_ALIGN64(_WindowOverflow8)
+
s32e a0, a9, -16
l32e a0, a1, -12
s32e a2, a9, -8
@@ -406,11 +423,12 @@
s32e a7, a0, -20
rfwo
+ENDPROC(_WindowOverflow8)
+
/* 8-Register Window Underflow Vector (Handler) */
- .align 64
-.global _WindowUnderflow8
-_WindowUnderflow8:
+ENTRY_ALIGN64(_WindowUnderflow8)
+
l32e a1, a9, -12
l32e a0, a9, -16
l32e a7, a1, -12
@@ -422,12 +440,12 @@
l32e a7, a7, -20
rfwu
+ENDPROC(_WindowUnderflow8)
/* 12-Register Window Overflow Vector (Handler) */
- .align 64
-.global _WindowOverflow12
-_WindowOverflow12:
+ENTRY_ALIGN64(_WindowOverflow12)
+
s32e a0, a13, -16
l32e a0, a1, -12
s32e a1, a13, -12
@@ -443,11 +461,12 @@
s32e a11, a0, -20
rfwo
+ENDPROC(_WindowOverflow12)
+
/* 12-Register Window Underflow Vector (Handler) */
- .align 64
-.global _WindowUnderflow12
-_WindowUnderflow12:
+ENTRY_ALIGN64(_WindowUnderflow12)
+
l32e a1, a13, -12
l32e a0, a13, -16
l32e a11, a1, -12
@@ -463,6 +482,6 @@
l32e a11, a11, -20
rfwu
+ENDPROC(_WindowUnderflow12)
+
.text
-
-
diff --git a/arch/xtensa/lib/checksum.S b/arch/xtensa/lib/checksum.S
index df397f9..4eb573d 100644
--- a/arch/xtensa/lib/checksum.S
+++ b/arch/xtensa/lib/checksum.S
@@ -41,10 +41,11 @@
.text
ENTRY(csum_partial)
- /*
- * Experiments with Ethernet and SLIP connections show that buf
- * is aligned on either a 2-byte or 4-byte boundary.
- */
+
+ /*
+ * Experiments with Ethernet and SLIP connections show that buf
+ * is aligned on either a 2-byte or 4-byte boundary.
+ */
entry sp, 32
extui a5, a2, 0, 2
bnez a5, 8f /* branch if 2-byte aligned */
@@ -170,7 +171,7 @@
3:
j 5b /* branch to handle the remaining byte */
-
+ENDPROC(csum_partial)
/*
* Copy from ds while checksumming, otherwise like csum_partial
@@ -211,6 +212,7 @@
*/
ENTRY(csum_partial_copy_generic)
+
entry sp, 32
mov a12, a3
mov a11, a4
@@ -367,6 +369,8 @@
6:
j 4b /* process the possible trailing odd byte */
+ENDPROC(csum_partial_copy_generic)
+
# Exception handler:
.section .fixup, "ax"
@@ -406,4 +410,3 @@
retw
.previous
-
diff --git a/arch/xtensa/lib/memcopy.S b/arch/xtensa/lib/memcopy.S
index c48b80a..b1c219a 100644
--- a/arch/xtensa/lib/memcopy.S
+++ b/arch/xtensa/lib/memcopy.S
@@ -210,8 +210,10 @@
_beqz a4, .Ldone # avoid loading anything for zero-length copies
# copy 16 bytes per iteration for word-aligned dst and unaligned src
ssa8 a3 # set shift amount from byte offset
-#define SIM_CHECKS_ALIGNMENT 1 /* set to 1 when running on ISS (simulator) with the
- lint or ferret client, or 0 to save a few cycles */
+
+/* set to 1 when running on ISS (simulator) with the
+ lint or ferret client, or 0 to save a few cycles */
+#define SIM_CHECKS_ALIGNMENT 1
#if XCHAL_UNALIGNED_LOAD_EXCEPTION || SIM_CHECKS_ALIGNMENT
and a11, a3, a8 # save unalignment offset for below
sub a3, a3, a11 # align a3
diff --git a/arch/xtensa/lib/pci-auto.c b/arch/xtensa/lib/pci-auto.c
index a71733a..34d05ab 100644
--- a/arch/xtensa/lib/pci-auto.c
+++ b/arch/xtensa/lib/pci-auto.c
@@ -241,8 +241,8 @@
unsigned char header_type;
struct pci_dev *dev = &pciauto_dev;
- pciauto_dev.bus = &pciauto_bus;
- pciauto_dev.sysdata = pci_ctrl;
+ pciauto_dev.bus = &pciauto_bus;
+ pciauto_dev.sysdata = pci_ctrl;
pciauto_bus.ops = pci_ctrl->ops;
/*
@@ -345,8 +345,3 @@
}
return sub_bus;
}
-
-
-
-
-
diff --git a/arch/xtensa/lib/strncpy_user.S b/arch/xtensa/lib/strncpy_user.S
index 9f603cd..1ad0ecf 100644
--- a/arch/xtensa/lib/strncpy_user.S
+++ b/arch/xtensa/lib/strncpy_user.S
@@ -166,7 +166,7 @@
retw
.Lz1: # byte 1 is zero
#ifdef __XTENSA_EB__
- extui a9, a9, 16, 16
+ extui a9, a9, 16, 16
#endif /* __XTENSA_EB__ */
EX(s16i, a9, a11, 0, fixup_s)
addi a11, a11, 1 # advance dst pointer
@@ -174,7 +174,7 @@
retw
.Lz2: # byte 2 is zero
#ifdef __XTENSA_EB__
- extui a9, a9, 16, 16
+ extui a9, a9, 16, 16
#endif /* __XTENSA_EB__ */
EX(s16i, a9, a11, 0, fixup_s)
movi a9, 0
diff --git a/arch/xtensa/lib/strnlen_user.S b/arch/xtensa/lib/strnlen_user.S
index 23f2a89..4c03b1e 100644
--- a/arch/xtensa/lib/strnlen_user.S
+++ b/arch/xtensa/lib/strnlen_user.S
@@ -145,4 +145,3 @@
lenfixup:
movi a2, 0
retw
-
diff --git a/arch/xtensa/lib/usercopy.S b/arch/xtensa/lib/usercopy.S
index 46d6031..ace1892 100644
--- a/arch/xtensa/lib/usercopy.S
+++ b/arch/xtensa/lib/usercopy.S
@@ -318,4 +318,3 @@
/* Ignore memset return value in a6. */
/* a2 still contains bytes not copied. */
retw
-
diff --git a/arch/xtensa/mm/cache.c b/arch/xtensa/mm/cache.c
index 85df465..81edeab 100644
--- a/arch/xtensa/mm/cache.c
+++ b/arch/xtensa/mm/cache.c
@@ -118,7 +118,7 @@
* For now, flush the whole cache. FIXME??
*/
-void flush_cache_range(struct vm_area_struct* vma,
+void flush_cache_range(struct vm_area_struct* vma,
unsigned long start, unsigned long end)
{
__flush_invalidate_dcache_all();
@@ -133,7 +133,7 @@
*/
void flush_cache_page(struct vm_area_struct* vma, unsigned long address,
- unsigned long pfn)
+ unsigned long pfn)
{
/* Note that we have to use the 'alias' address to avoid multi-hit */
@@ -166,14 +166,14 @@
if (!PageReserved(page) && test_bit(PG_arch_1, &page->flags)) {
- unsigned long vaddr = TLBTEMP_BASE_1 + (addr & DCACHE_ALIAS_MASK);
unsigned long paddr = (unsigned long) page_address(page);
unsigned long phys = page_to_phys(page);
+ unsigned long tmp = TLBTEMP_BASE_1 + (addr & DCACHE_ALIAS_MASK);
__flush_invalidate_dcache_page(paddr);
- __flush_invalidate_dcache_page_alias(vaddr, phys);
- __invalidate_icache_page_alias(vaddr, phys);
+ __flush_invalidate_dcache_page_alias(tmp, phys);
+ __invalidate_icache_page_alias(tmp, phys);
clear_bit(PG_arch_1, &page->flags);
}
@@ -195,7 +195,7 @@
#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
@@ -205,8 +205,8 @@
/* Flush and invalidate user page if aliased. */
if (alias) {
- unsigned long temp = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK);
- __flush_invalidate_dcache_page_alias(temp, phys);
+ unsigned long t = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK);
+ __flush_invalidate_dcache_page_alias(t, phys);
}
/* Copy data */
@@ -219,12 +219,11 @@
*/
if (alias) {
- unsigned long temp = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK);
+ unsigned long t = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK);
__flush_invalidate_dcache_range((unsigned long) dst, len);
- if ((vma->vm_flags & VM_EXEC) != 0) {
- __invalidate_icache_page_alias(temp, phys);
- }
+ if ((vma->vm_flags & VM_EXEC) != 0)
+ __invalidate_icache_page_alias(t, phys);
} else if ((vma->vm_flags & VM_EXEC) != 0) {
__flush_dcache_range((unsigned long)dst,len);
@@ -245,8 +244,8 @@
*/
if (alias) {
- unsigned long temp = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK);
- __flush_invalidate_dcache_page_alias(temp, phys);
+ unsigned long t = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK);
+ __flush_invalidate_dcache_page_alias(t, phys);
}
memcpy(dst, src, len);
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index 245b08f..4b7bc8d 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -254,4 +254,3 @@
die("Oops", regs, sig);
do_exit(sig);
}
-
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index db955179..7a5156f 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -75,15 +75,15 @@
sysmem.nr_banks++;
}
sysmem.bank[i].end = start;
+
+ } else if (end < sysmem.bank[i].end) {
+ sysmem.bank[i].start = end;
+
} else {
- if (end < sysmem.bank[i].end)
- sysmem.bank[i].start = end;
- else {
- /* remove entry */
- sysmem.nr_banks--;
- sysmem.bank[i].start = sysmem.bank[sysmem.nr_banks].start;
- sysmem.bank[i].end = sysmem.bank[sysmem.nr_banks].end;
- }
+ /* remove entry */
+ sysmem.nr_banks--;
+ sysmem.bank[i].start = sysmem.bank[sysmem.nr_banks].start;
+ sysmem.bank[i].end = sysmem.bank[sysmem.nr_banks].end;
}
return -1;
}
diff --git a/arch/xtensa/mm/misc.S b/arch/xtensa/mm/misc.S
index b048406..d97ed1b 100644
--- a/arch/xtensa/mm/misc.S
+++ b/arch/xtensa/mm/misc.S
@@ -29,6 +29,7 @@
*/
ENTRY(clear_page)
+
entry a1, 16
movi a3, 0
@@ -45,6 +46,8 @@
retw
+ENDPROC(clear_page)
+
/*
* copy_page and copy_user_page are the same for non-cache-aliased configs.
*
@@ -53,6 +56,7 @@
*/
ENTRY(copy_page)
+
entry a1, 16
__loopi a2, a4, PAGE_SIZE, 32
@@ -84,6 +88,8 @@
retw
+ENDPROC(copy_page)
+
#ifdef CONFIG_MMU
/*
* If we have to deal with cache aliasing, we use temporary memory mappings
@@ -109,6 +115,7 @@
*/
ENTRY(clear_user_page)
+
entry a1, 32
/* Mark page dirty and determine alias. */
@@ -164,6 +171,8 @@
retw
+ENDPROC(clear_user_page)
+
/*
* copy_page_user (void *to, void *from, unsigned long vaddr, struct page *page)
* a2 a3 a4 a5
@@ -171,7 +180,7 @@
ENTRY(copy_user_page)
- entry a1, 32
+ entry a1, 32
/* Mark page dirty and determine alias for destination. */
@@ -262,6 +271,8 @@
retw
+ENDPROC(copy_user_page)
+
#endif
#if (DCACHE_WAY_SIZE > PAGE_SIZE)
@@ -272,6 +283,7 @@
*/
ENTRY(__flush_invalidate_dcache_page_alias)
+
entry sp, 16
movi a7, 0 # required for exception handler
@@ -287,6 +299,7 @@
retw
+ENDPROC(__flush_invalidate_dcache_page_alias)
#endif
ENTRY(__tlbtemp_mapping_itlb)
@@ -294,6 +307,7 @@
#if (ICACHE_WAY_SIZE > PAGE_SIZE)
ENTRY(__invalidate_icache_page_alias)
+
entry sp, 16
addi a6, a3, (PAGE_KERNEL_EXEC | _PAGE_HW_WRITE)
@@ -307,11 +321,14 @@
isync
retw
+ENDPROC(__invalidate_icache_page_alias)
+
#endif
/* End of special treatment in tlb miss exception */
ENTRY(__tlbtemp_mapping_end)
+
#endif /* CONFIG_MMU
/*
@@ -319,6 +336,7 @@
*/
ENTRY(__invalidate_icache_page)
+
entry sp, 16
___invalidate_icache_page a2 a3
@@ -326,11 +344,14 @@
retw
+ENDPROC(__invalidate_icache_page)
+
/*
* void __invalidate_dcache_page(ulong start)
*/
ENTRY(__invalidate_dcache_page)
+
entry sp, 16
___invalidate_dcache_page a2 a3
@@ -338,11 +359,14 @@
retw
+ENDPROC(__invalidate_dcache_page)
+
/*
* void __flush_invalidate_dcache_page(ulong start)
*/
ENTRY(__flush_invalidate_dcache_page)
+
entry sp, 16
___flush_invalidate_dcache_page a2 a3
@@ -350,11 +374,14 @@
dsync
retw
+ENDPROC(__flush_invalidate_dcache_page)
+
/*
* void __flush_dcache_page(ulong start)
*/
ENTRY(__flush_dcache_page)
+
entry sp, 16
___flush_dcache_page a2 a3
@@ -362,11 +389,14 @@
dsync
retw
+ENDPROC(__flush_dcache_page)
+
/*
* void __invalidate_icache_range(ulong start, ulong size)
*/
ENTRY(__invalidate_icache_range)
+
entry sp, 16
___invalidate_icache_range a2 a3 a4
@@ -374,11 +404,14 @@
retw
+ENDPROC(__invalidate_icache_range)
+
/*
* void __flush_invalidate_dcache_range(ulong start, ulong size)
*/
ENTRY(__flush_invalidate_dcache_range)
+
entry sp, 16
___flush_invalidate_dcache_range a2 a3 a4
@@ -386,11 +419,14 @@
retw
+ENDPROC(__flush_invalidate_dcache_range)
+
/*
* void _flush_dcache_range(ulong start, ulong size)
*/
ENTRY(__flush_dcache_range)
+
entry sp, 16
___flush_dcache_range a2 a3 a4
@@ -398,22 +434,28 @@
retw
+ENDPROC(__flush_dcache_range)
+
/*
* void _invalidate_dcache_range(ulong start, ulong size)
*/
ENTRY(__invalidate_dcache_range)
+
entry sp, 16
___invalidate_dcache_range a2 a3 a4
retw
+ENDPROC(__invalidate_dcache_range)
+
/*
* void _invalidate_icache_all(void)
*/
ENTRY(__invalidate_icache_all)
+
entry sp, 16
___invalidate_icache_all a2 a3
@@ -421,11 +463,14 @@
retw
+ENDPROC(__invalidate_icache_all)
+
/*
* void _flush_invalidate_dcache_all(void)
*/
ENTRY(__flush_invalidate_dcache_all)
+
entry sp, 16
___flush_invalidate_dcache_all a2 a3
@@ -433,11 +478,14 @@
retw
+ENDPROC(__flush_invalidate_dcache_all)
+
/*
* void _invalidate_dcache_all(void)
*/
ENTRY(__invalidate_dcache_all)
+
entry sp, 16
___invalidate_dcache_all a2 a3
@@ -445,3 +493,4 @@
retw
+ENDPROC(__invalidate_dcache_all)
diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c
index ca81654..0f77f9d 100644
--- a/arch/xtensa/mm/mmu.c
+++ b/arch/xtensa/mm/mmu.c
@@ -37,7 +37,7 @@
/* Set rasid register to a known value. */
- set_rasid_register(ASID_USER_FIRST);
+ set_rasid_register(ASID_INSERT(ASID_USER_FIRST));
/* Set PTEVADDR special register to the start of the page
* table, which is in kernel mappable space (ie. not
diff --git a/arch/xtensa/mm/tlb.c b/arch/xtensa/mm/tlb.c
index e2700b2..5411aa6 100644
--- a/arch/xtensa/mm/tlb.c
+++ b/arch/xtensa/mm/tlb.c
@@ -63,7 +63,7 @@
void flush_tlb_mm(struct mm_struct *mm)
{
if (mm == current->active_mm) {
- int flags;
+ unsigned long flags;
local_save_flags(flags);
__get_new_mmu_context(mm);
__load_mmu_context(mm);
@@ -82,7 +82,7 @@
#endif
void flush_tlb_range (struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
+ unsigned long start, unsigned long end)
{
struct mm_struct *mm = vma->vm_mm;
unsigned long flags;
@@ -100,7 +100,7 @@
int oldpid = get_rasid_register();
set_rasid_register (ASID_INSERT(mm->context));
start &= PAGE_MASK;
- if (vma->vm_flags & VM_EXEC)
+ if (vma->vm_flags & VM_EXEC)
while(start < end) {
invalidate_itlb_mapping(start);
invalidate_dtlb_mapping(start);
@@ -130,7 +130,7 @@
local_save_flags(flags);
- oldpid = get_rasid_register();
+ oldpid = get_rasid_register();
if (vma->vm_flags & VM_EXEC)
invalidate_itlb_mapping(page);
@@ -140,4 +140,3 @@
local_irq_restore(flags);
}
-
diff --git a/arch/xtensa/platforms/iss/include/platform/serial.h b/arch/xtensa/platforms/iss/include/platform/serial.h
index e69de29..16aec54 100644
--- a/arch/xtensa/platforms/iss/include/platform/serial.h
+++ b/arch/xtensa/platforms/iss/include/platform/serial.h
@@ -0,0 +1,15 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012 Tensilica Inc.
+ */
+
+#ifndef __ASM_XTENSA_ISS_SERIAL_H
+#define __ASM_XTENSA_ISS_SERIAL_H
+
+/* Have no meaning on ISS, but needed for 8250_early.c */
+#define BASE_BAUD 0
+
+#endif /* __ASM_XTENSA_ISS_SERIAL_H */
diff --git a/arch/xtensa/platforms/iss/include/platform/simcall.h b/arch/xtensa/platforms/iss/include/platform/simcall.h
index bd78192e2..b5a4edf 100644
--- a/arch/xtensa/platforms/iss/include/platform/simcall.h
+++ b/arch/xtensa/platforms/iss/include/platform/simcall.h
@@ -74,13 +74,12 @@
"mov %1, a3\n"
: "=a" (ret), "=a" (errno), "+r"(a1), "+r"(b1)
: "r"(c1), "r"(d1), "r"(e1), "r"(f1)
- : );
+ : "memory");
return ret;
}
static inline int simc_open(const char *file, int flags, int mode)
{
- wmb();
return __simc(SYS_open, (int) file, flags, mode, 0, 0);
}
@@ -91,19 +90,16 @@
static inline int simc_ioctl(int fd, int request, void *arg)
{
- wmb();
return __simc(SYS_ioctl, fd, request, (int) arg, 0, 0);
}
static inline int simc_read(int fd, void *buf, size_t count)
{
- rmb();
return __simc(SYS_read, fd, (int) buf, count, 0, 0);
}
static inline int simc_write(int fd, const void *buf, size_t count)
{
- wmb();
return __simc(SYS_write, fd, (int) buf, count, 0, 0);
}
@@ -111,7 +107,6 @@
{
struct timeval tv = { .tv_sec = 0, .tv_usec = 0 };
- wmb();
return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&tv,
0, 0);
}
diff --git a/arch/xtensa/platforms/xtfpga/Makefile b/arch/xtensa/platforms/xtfpga/Makefile
new file mode 100644
index 0000000..b9ae206
--- /dev/null
+++ b/arch/xtensa/platforms/xtfpga/Makefile
@@ -0,0 +1,9 @@
+# Makefile for the Tensilica xtavnet Emulation Board
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+# Note 2! The CFLAGS definitions are in the main makefile...
+
+obj-y = setup.o lcd.o
diff --git a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
new file mode 100644
index 0000000..4416773
--- /dev/null
+++ b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
@@ -0,0 +1,69 @@
+/*
+ * arch/xtensa/platform/xtavnet/include/platform/hardware.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Tensilica Inc.
+ */
+
+/*
+ * This file contains the hardware configuration of the XTAVNET boards.
+ */
+
+#ifndef __XTENSA_XTAVNET_HARDWARE_H
+#define __XTENSA_XTAVNET_HARDWARE_H
+
+/* By default NO_IRQ is defined to 0 in Linux, but we use the
+ interrupt 0 for UART... */
+#define NO_IRQ -1
+
+/* Memory configuration. */
+
+#define PLATFORM_DEFAULT_MEM_START 0x00000000
+#define PLATFORM_DEFAULT_MEM_SIZE 0x04000000
+
+/* Interrupt configuration. */
+
+#define PLATFORM_NR_IRQS 10
+
+/* Default assignment of LX60 devices to external interrupts. */
+
+#ifdef CONFIG_ARCH_HAS_SMP
+#define DUART16552_INTNUM XCHAL_EXTINT3_NUM
+#define OETH_IRQ XCHAL_EXTINT4_NUM
+#else
+#define DUART16552_INTNUM XCHAL_EXTINT0_NUM
+#define OETH_IRQ XCHAL_EXTINT1_NUM
+#endif
+
+/*
+ * Device addresses and parameters.
+ */
+
+/* UART */
+#define DUART16552_PADDR (XCHAL_KIO_PADDR + 0x0D050020)
+/* LCD instruction and data addresses. */
+#define LCD_INSTR_ADDR ((char *)IOADDR(0x0D040000))
+#define LCD_DATA_ADDR ((char *)IOADDR(0x0D040004))
+
+/* Misc. */
+#define XTFPGA_FPGAREGS_VADDR IOADDR(0x0D020000)
+/* Clock frequency in Hz (read-only): */
+#define XTFPGA_CLKFRQ_VADDR (XTFPGA_FPGAREGS_VADDR + 0x04)
+/* Setting of 8 DIP switches: */
+#define DIP_SWITCHES_VADDR (XTFPGA_FPGAREGS_VADDR + 0x0C)
+/* Software reset (write 0xdead): */
+#define XTFPGA_SWRST_VADDR (XTFPGA_FPGAREGS_VADDR + 0x10)
+
+/* OpenCores Ethernet controller: */
+ /* regs + RX/TX descriptors */
+#define OETH_REGS_PADDR (XCHAL_KIO_PADDR + 0x0D030000)
+#define OETH_REGS_SIZE 0x1000
+#define OETH_SRAMBUFF_PADDR (XCHAL_KIO_PADDR + 0x0D800000)
+
+ /* 5*rx buffs + 5*tx buffs */
+#define OETH_SRAMBUFF_SIZE (5 * 0x600 + 5 * 0x600)
+
+#endif /* __XTENSA_XTAVNET_HARDWARE_H */
diff --git a/arch/xtensa/platforms/xtfpga/include/platform/lcd.h b/arch/xtensa/platforms/xtfpga/include/platform/lcd.h
new file mode 100644
index 0000000..0e43564
--- /dev/null
+++ b/arch/xtensa/platforms/xtfpga/include/platform/lcd.h
@@ -0,0 +1,20 @@
+/*
+ * arch/xtensa/platform/xtavnet/include/platform/lcd.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001, 2006 Tensilica Inc.
+ */
+
+#ifndef __XTENSA_XTAVNET_LCD_H
+#define __XTENSA_XTAVNET_LCD_H
+
+/* Display string STR at position POS on the LCD. */
+void lcd_disp_at_pos(char *str, unsigned char pos);
+
+/* Shift the contents of the LCD display left or right. */
+void lcd_shiftleft(void);
+void lcd_shiftright(void);
+#endif
diff --git a/arch/xtensa/platforms/xtfpga/include/platform/serial.h b/arch/xtensa/platforms/xtfpga/include/platform/serial.h
new file mode 100644
index 0000000..14d8f7b
--- /dev/null
+++ b/arch/xtensa/platforms/xtfpga/include/platform/serial.h
@@ -0,0 +1,18 @@
+/*
+ * arch/xtensa/platform/xtavnet/include/platform/serial.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001, 2006 Tensilica Inc.
+ */
+
+#ifndef __ASM_XTENSA_XTAVNET_SERIAL_H
+#define __ASM_XTENSA_XTAVNET_SERIAL_H
+
+#include <platform/hardware.h>
+
+#define BASE_BAUD (*(long *)XTFPGA_CLKFRQ_VADDR / 16)
+
+#endif /* __ASM_XTENSA_XTAVNET_SERIAL_H */
diff --git a/arch/xtensa/platforms/xtfpga/lcd.c b/arch/xtensa/platforms/xtfpga/lcd.c
new file mode 100644
index 0000000..2872301
--- /dev/null
+++ b/arch/xtensa/platforms/xtfpga/lcd.c
@@ -0,0 +1,76 @@
+/*
+ * Driver for the LCD display on the Tensilica LX60 Board.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001, 2006 Tensilica Inc.
+ */
+
+/*
+ *
+ * FIXME: this code is from the examples from the LX60 user guide.
+ *
+ * The lcd_pause function does busy waiting, which is probably not
+ * great. Maybe the code could be changed to use kernel timers, or
+ * change the hardware to not need to wait.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <platform/hardware.h>
+#include <platform/lcd.h>
+#include <linux/delay.h>
+
+#define LCD_PAUSE_ITERATIONS 4000
+#define LCD_CLEAR 0x1
+#define LCD_DISPLAY_ON 0xc
+
+/* 8bit and 2 lines display */
+#define LCD_DISPLAY_MODE8BIT 0x38
+#define LCD_DISPLAY_POS 0x80
+#define LCD_SHIFT_LEFT 0x18
+#define LCD_SHIFT_RIGHT 0x1c
+
+static int __init lcd_init(void)
+{
+ *LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT;
+ mdelay(5);
+ *LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT;
+ udelay(200);
+ *LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT;
+ udelay(50);
+ *LCD_INSTR_ADDR = LCD_DISPLAY_ON;
+ udelay(50);
+ *LCD_INSTR_ADDR = LCD_CLEAR;
+ mdelay(10);
+ lcd_disp_at_pos("XTENSA LINUX", 0);
+ return 0;
+}
+
+void lcd_disp_at_pos(char *str, unsigned char pos)
+{
+ *LCD_INSTR_ADDR = LCD_DISPLAY_POS | pos;
+ udelay(100);
+ while (*str != 0) {
+ *LCD_DATA_ADDR = *str;
+ udelay(200);
+ str++;
+ }
+}
+
+void lcd_shiftleft(void)
+{
+ *LCD_INSTR_ADDR = LCD_SHIFT_LEFT;
+ udelay(50);
+}
+
+void lcd_shiftright(void)
+{
+ *LCD_INSTR_ADDR = LCD_SHIFT_RIGHT;
+ udelay(50);
+}
+
+arch_initcall(lcd_init);
diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c
new file mode 100644
index 0000000..4b9951a
--- /dev/null
+++ b/arch/xtensa/platforms/xtfpga/setup.c
@@ -0,0 +1,301 @@
+/*
+ *
+ * arch/xtensa/platform/xtavnet/setup.c
+ *
+ * ...
+ *
+ * Authors: Chris Zankel <chris@zankel.net>
+ * Joe Taylor <joe@tensilica.com>
+ *
+ * Copyright 2001 - 2006 Tensilica Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+
+#include <asm/timex.h>
+#include <asm/processor.h>
+#include <asm/platform.h>
+#include <asm/bootparam.h>
+#include <platform/lcd.h>
+#include <platform/hardware.h>
+
+void platform_halt(void)
+{
+ lcd_disp_at_pos(" HALT ", 0);
+ local_irq_disable();
+ while (1)
+ cpu_relax();
+}
+
+void platform_power_off(void)
+{
+ lcd_disp_at_pos("POWEROFF", 0);
+ local_irq_disable();
+ while (1)
+ cpu_relax();
+}
+
+void platform_restart(void)
+{
+ /* Flush and reset the mmu, simulate a processor reset, and
+ * jump to the reset vector. */
+
+
+ __asm__ __volatile__ ("movi a2, 15\n\t"
+ "wsr a2, icountlevel\n\t"
+ "movi a2, 0\n\t"
+ "wsr a2, icount\n\t"
+ "wsr a2, ibreakenable\n\t"
+ "wsr a2, lcount\n\t"
+ "movi a2, 0x1f\n\t"
+ "wsr a2, ps\n\t"
+ "isync\n\t"
+ "jx %0\n\t"
+ :
+ : "a" (XCHAL_RESET_VECTOR_VADDR)
+ : "a2"
+ );
+
+ /* control never gets here */
+}
+
+void __init platform_setup(char **cmdline)
+{
+}
+
+#ifdef CONFIG_OF
+
+static void __init update_clock_frequency(struct device_node *node)
+{
+ struct property *newfreq;
+ u32 freq;
+
+ if (!of_property_read_u32(node, "clock-frequency", &freq) && freq != 0)
+ return;
+
+ newfreq = kzalloc(sizeof(*newfreq) + sizeof(u32), GFP_KERNEL);
+ if (!newfreq)
+ return;
+ newfreq->value = newfreq + 1;
+ newfreq->length = sizeof(freq);
+ newfreq->name = kstrdup("clock-frequency", GFP_KERNEL);
+ if (!newfreq->name) {
+ kfree(newfreq);
+ return;
+ }
+
+ *(u32 *)newfreq->value = cpu_to_be32(*(u32 *)XTFPGA_CLKFRQ_VADDR);
+ prom_update_property(node, newfreq);
+}
+
+#define MAC_LEN 6
+static void __init update_local_mac(struct device_node *node)
+{
+ struct property *newmac;
+ const u8* macaddr;
+ int prop_len;
+
+ macaddr = of_get_property(node, "local-mac-address", &prop_len);
+ if (macaddr == NULL || prop_len != MAC_LEN)
+ return;
+
+ newmac = kzalloc(sizeof(*newmac) + MAC_LEN, GFP_KERNEL);
+ if (newmac == NULL)
+ return;
+
+ newmac->value = newmac + 1;
+ newmac->length = MAC_LEN;
+ newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+ if (newmac->name == NULL) {
+ kfree(newmac);
+ return;
+ }
+
+ memcpy(newmac->value, macaddr, MAC_LEN);
+ ((u8*)newmac->value)[5] = (*(u32*)DIP_SWITCHES_VADDR) & 0x3f;
+ prom_update_property(node, newmac);
+}
+
+static int __init machine_setup(void)
+{
+ struct device_node *serial;
+ struct device_node *eth = NULL;
+
+ for_each_compatible_node(serial, NULL, "ns16550a")
+ update_clock_frequency(serial);
+
+ if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc")))
+ update_local_mac(eth);
+ return 0;
+}
+arch_initcall(machine_setup);
+
+#endif
+
+/* early initialization */
+
+void __init platform_init(bp_tag_t *first)
+{
+}
+
+/* Heartbeat. */
+
+void platform_heartbeat(void)
+{
+}
+
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
+
+void platform_calibrate_ccount(void)
+{
+ long clk_freq = 0;
+#ifdef CONFIG_OF
+ struct device_node *cpu =
+ of_find_compatible_node(NULL, NULL, "xtensa,cpu");
+ if (cpu) {
+ u32 freq;
+ update_clock_frequency(cpu);
+ if (!of_property_read_u32(cpu, "clock-frequency", &freq))
+ clk_freq = freq;
+ }
+#endif
+ if (!clk_freq)
+ clk_freq = *(long *)XTFPGA_CLKFRQ_VADDR;
+
+ ccount_per_jiffy = clk_freq / HZ;
+ nsec_per_ccount = 1000000000UL / clk_freq;
+}
+
+#endif
+
+#ifndef CONFIG_OF
+
+#include <linux/serial_8250.h>
+#include <linux/if.h>
+#include <net/ethoc.h>
+
+/*----------------------------------------------------------------------------
+ * Ethernet -- OpenCores Ethernet MAC (ethoc driver)
+ */
+
+static struct resource ethoc_res[] __initdata = {
+ [0] = { /* register space */
+ .start = OETH_REGS_PADDR,
+ .end = OETH_REGS_PADDR + OETH_REGS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* buffer space */
+ .start = OETH_SRAMBUFF_PADDR,
+ .end = OETH_SRAMBUFF_PADDR + OETH_SRAMBUFF_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = { /* IRQ number */
+ .start = OETH_IRQ,
+ .end = OETH_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct ethoc_platform_data ethoc_pdata __initdata = {
+ /*
+ * The MAC address for these boards is 00:50:c2:13:6f:xx.
+ * The last byte (here as zero) is read from the DIP switches on the
+ * board.
+ */
+ .hwaddr = { 0x00, 0x50, 0xc2, 0x13, 0x6f, 0 },
+ .phy_id = -1,
+};
+
+static struct platform_device ethoc_device __initdata = {
+ .name = "ethoc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ethoc_res),
+ .resource = ethoc_res,
+ .dev = {
+ .platform_data = ðoc_pdata,
+ },
+};
+
+/*----------------------------------------------------------------------------
+ * UART
+ */
+
+static struct resource serial_resource __initdata = {
+ .start = DUART16552_PADDR,
+ .end = DUART16552_PADDR + 0x1f,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port serial_platform_data[] __initdata = {
+ [0] = {
+ .mapbase = DUART16552_PADDR,
+ .irq = DUART16552_INTNUM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ .uartclk = 0, /* set in xtavnet_init() */
+ },
+ { },
+};
+
+static struct platform_device xtavnet_uart __initdata = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+ .num_resources = 1,
+ .resource = &serial_resource,
+};
+
+/* platform devices */
+static struct platform_device *platform_devices[] __initdata = {
+ ðoc_device,
+ &xtavnet_uart,
+};
+
+
+static int __init xtavnet_init(void)
+{
+ /* Ethernet MAC address. */
+ ethoc_pdata.hwaddr[5] = *(u32 *)DIP_SWITCHES_VADDR;
+
+ /* Clock rate varies among FPGA bitstreams; board specific FPGA register
+ * reports the actual clock rate.
+ */
+ serial_platform_data[0].uartclk = *(long *)XTFPGA_CLKFRQ_VADDR;
+
+
+ /* register platform devices */
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+ /* ETHOC driver is a bit quiet; at least display Ethernet MAC, so user
+ * knows whether they set it correctly on the DIP switches.
+ */
+ pr_info("XTFPGA: Ethernet MAC %pM\n", ethoc_pdata.hwaddr);
+
+ return 0;
+}
+
+/*
+ * Register to be done during do_initcalls().
+ */
+arch_initcall(xtavnet_init);
+
+#endif /* CONFIG_OF */
diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c
index b89541b..da9e85c 100644
--- a/arch/xtensa/variants/s6000/gpio.c
+++ b/arch/xtensa/variants/s6000/gpio.c
@@ -164,7 +164,7 @@
int cirq;
chip->irq_mask(&desc->irq_data);
- chip->irq_ack(&desc->irq_data));
+ chip->irq_ack(&desc->irq_data);
pending = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_MIS) & *mask;
cirq = IRQ_BASE - 1;
while (pending) {
@@ -173,7 +173,7 @@
pending >>= n;
generic_handle_irq(cirq);
}
- chip->irq_unmask(&desc->irq_data));
+ chip->irq_unmask(&desc->irq_data);
}
extern const signed char *platform_irq_mappings[XTENSA_NR_IRQS];
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
index e162999..c62c788 100644
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -13,12 +13,13 @@
#include <linux/export.h>
#include <linux/bcma/bcma.h>
-static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
+u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
{
bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
}
+EXPORT_SYMBOL_GPL(bcma_chipco_pll_read);
void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
{
diff --git a/drivers/char/random.c b/drivers/char/random.c
index b86eae9..85e81ec 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -399,7 +399,6 @@
static DECLARE_WAIT_QUEUE_HEAD(random_write_wait);
static struct fasync_struct *fasync;
-#if 0
static bool debug;
module_param(debug, bool, 0644);
#define DEBUG_ENT(fmt, arg...) do { \
@@ -410,9 +409,6 @@
blocking_pool.entropy_count,\
nonblocking_pool.entropy_count,\
## arg); } while (0)
-#else
-#define DEBUG_ENT(fmt, arg...) do {} while (0)
-#endif
/**********************************************************************
*
@@ -437,6 +433,7 @@
int entropy_count;
int entropy_total;
unsigned int initialized:1;
+ bool last_data_init;
__u8 last_data[EXTRACT_SIZE];
};
@@ -829,7 +826,7 @@
bytes = min_t(int, bytes, sizeof(tmp));
DEBUG_ENT("going to reseed %s with %d bits "
- "(%d of %d requested)\n",
+ "(%zu of %d requested)\n",
r->name, bytes * 8, nbytes * 8, r->entropy_count);
bytes = extract_entropy(r->pull, tmp, bytes,
@@ -860,7 +857,7 @@
spin_lock_irqsave(&r->lock, flags);
BUG_ON(r->entropy_count > r->poolinfo->POOLBITS);
- DEBUG_ENT("trying to extract %d bits from %s\n",
+ DEBUG_ENT("trying to extract %zu bits from %s\n",
nbytes * 8, r->name);
/* Can we pull enough? */
@@ -882,7 +879,7 @@
}
}
- DEBUG_ENT("debiting %d entropy credits from %s%s\n",
+ DEBUG_ENT("debiting %zu entropy credits from %s%s\n",
nbytes * 8, r->name, r->limit ? "" : " (unlimited)");
spin_unlock_irqrestore(&r->lock, flags);
@@ -957,6 +954,10 @@
ssize_t ret = 0, i;
__u8 tmp[EXTRACT_SIZE];
+ /* if last_data isn't primed, we need EXTRACT_SIZE extra bytes */
+ if (fips_enabled && !r->last_data_init)
+ nbytes += EXTRACT_SIZE;
+
trace_extract_entropy(r->name, nbytes, r->entropy_count, _RET_IP_);
xfer_secondary_pool(r, nbytes);
nbytes = account(r, nbytes, min, reserved);
@@ -967,6 +968,17 @@
if (fips_enabled) {
unsigned long flags;
+
+ /* prime last_data value if need be, per fips 140-2 */
+ if (!r->last_data_init) {
+ spin_lock_irqsave(&r->lock, flags);
+ memcpy(r->last_data, tmp, EXTRACT_SIZE);
+ r->last_data_init = true;
+ nbytes -= EXTRACT_SIZE;
+ spin_unlock_irqrestore(&r->lock, flags);
+ extract_buf(r, tmp);
+ }
+
spin_lock_irqsave(&r->lock, flags);
if (!memcmp(tmp, r->last_data, EXTRACT_SIZE))
panic("Hardware RNG duplicated output!\n");
@@ -1086,6 +1098,7 @@
r->entropy_count = 0;
r->entropy_total = 0;
+ r->last_data_init = false;
mix_pool_bytes(r, &now, sizeof(now), NULL);
for (i = r->poolinfo->POOLBYTES; i > 0; i -= sizeof(rv)) {
if (!arch_get_random_long(&rv))
@@ -1142,11 +1155,16 @@
if (n > SEC_XFER_SIZE)
n = SEC_XFER_SIZE;
- DEBUG_ENT("reading %d bits\n", n*8);
+ DEBUG_ENT("reading %zu bits\n", n*8);
n = extract_entropy_user(&blocking_pool, buf, n);
- DEBUG_ENT("read got %d bits (%d still needed)\n",
+ if (n < 0) {
+ retval = n;
+ break;
+ }
+
+ DEBUG_ENT("read got %zd bits (%zd still needed)\n",
n*8, (nbytes-n)*8);
if (n == 0) {
@@ -1171,10 +1189,6 @@
continue;
}
- if (n < 0) {
- retval = n;
- break;
- }
count += n;
buf += n;
nbytes -= n;
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 517a8ff..6b4c70f 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -20,6 +20,7 @@
clk_register_clkdev(clk, NULL, "gpio.2");
clk_register_clkdev(clk, NULL, "gpio.3");
clk_register_clkdev(clk, NULL, "rng");
+ clk_register_clkdev(clk, NULL, "fsmc-nand");
/*
* The 2.4 MHz TIMCLK reference clock is active at boot time, this is
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 8ae1f5b..682de75 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -172,6 +172,7 @@
config GPIO_MVEBU
def_bool y
depends on PLAT_ORION
+ depends on OF
select GPIO_GENERIC
select GENERIC_IRQ_CHIP
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 6cc87ac..6f2306d 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -390,6 +390,7 @@
return -ENODEV;
}
+ spin_lock_init(&ichx_priv.lock);
res_base = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPIO);
ichx_priv.use_gpio = ich_info->use_gpio;
err = ichx_gpio_request_regions(res_base, pdev->name,
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index d767b53..7d9bd94 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -41,7 +41,6 @@
#include <linux/io.h>
#include <linux/of_irq.h>
#include <linux/of_device.h>
-#include <linux/platform_device.h>
#include <linux/pinctrl/consumer.h>
/*
@@ -469,19 +468,6 @@
}
}
-static struct platform_device_id mvebu_gpio_ids[] = {
- {
- .name = "orion-gpio",
- }, {
- .name = "mv78200-gpio",
- }, {
- .name = "armadaxp-gpio",
- }, {
- /* sentinel */
- },
-};
-MODULE_DEVICE_TABLE(platform, mvebu_gpio_ids);
-
static struct of_device_id mvebu_gpio_of_match[] = {
{
.compatible = "marvell,orion-gpio",
@@ -555,9 +541,7 @@
mvchip->chip.base = id * MVEBU_MAX_GPIO_PER_BANK;
mvchip->chip.ngpio = ngpios;
mvchip->chip.can_sleep = 0;
-#ifdef CONFIG_OF
mvchip->chip.of_node = np;
-#endif
spin_lock_init(&mvchip->lock);
mvchip->membase = devm_request_and_ioremap(&pdev->dev, res);
@@ -698,7 +682,6 @@
.of_match_table = mvebu_gpio_of_match,
},
.probe = mvebu_gpio_probe,
- .id_table = mvebu_gpio_ids,
};
static int __init mvebu_gpio_init(void)
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index a915133..33d20be 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -579,7 +579,7 @@
* at this point the buffer should be dead, so
* no new sync objects can be attached.
*/
- sync_obj = driver->sync_obj_ref(&bo->sync_obj);
+ sync_obj = driver->sync_obj_ref(bo->sync_obj);
spin_unlock(&bdev->fence_lock);
atomic_set(&bo->reserved, 0);
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index d6cc77a..5f306f7 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -921,6 +921,7 @@
int retval;
#ifdef CONFIG_X86
+ u8 a20_on = 0xdf;
/* Just return if pre-detection shows no i8042 controller exist */
if (!x86_platform.i8042_detect())
return -ENODEV;
@@ -960,6 +961,14 @@
if (dmi_check_system(i8042_dmi_dritek_table))
i8042_dritek = true;
+
+ /*
+ * A20 was already enabled during early kernel init. But some buggy
+ * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to
+ * resume from S3. So we do it here and hope that nothing breaks.
+ */
+ i8042_command(&a20_on, 0x10d1);
+ i8042_command(NULL, 0x00ff); /* Null command for SMM firmware */
#endif /* CONFIG_X86 */
return retval;
diff --git a/drivers/mtd/ar7part.c b/drivers/mtd/ar7part.c
index 9453931..7c057a0 100644
--- a/drivers/mtd/ar7part.c
+++ b/drivers/mtd/ar7part.c
@@ -26,19 +26,16 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/bootmem.h>
-#include <linux/magic.h>
#include <linux/module.h>
+#include <uapi/linux/magic.h>
+
#define AR7_PARTS 4
#define ROOT_OFFSET 0xe0000
#define LOADER_MAGIC1 le32_to_cpu(0xfeedfa42)
#define LOADER_MAGIC2 le32_to_cpu(0xfeed1281)
-#ifndef SQUASHFS_MAGIC
-#define SQUASHFS_MAGIC 0x73717368
-#endif
-
struct ar7_bin_rec {
unsigned int checksum;
unsigned int length;
diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/bcm63xxpart.c
index 63d2a64..6eeb84c 100644
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
@@ -37,8 +37,7 @@
#define BCM63XX_EXTENDED_SIZE 0xBFC00000 /* Extended flash address */
-#define BCM63XX_MIN_CFE_SIZE 0x10000 /* always at least 64KiB */
-#define BCM63XX_MIN_NVRAM_SIZE 0x10000 /* always at least 64KiB */
+#define BCM63XX_CFE_BLOCK_SIZE 0x10000 /* always at least 64KiB */
#define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
@@ -79,7 +78,7 @@
unsigned int rootfsaddr, kerneladdr, spareaddr;
unsigned int rootfslen, kernellen, sparelen, totallen;
unsigned int cfelen, nvramlen;
- int namelen = 0;
+ unsigned int cfe_erasesize;
int i;
u32 computed_crc;
bool rootfs_first = false;
@@ -87,8 +86,11 @@
if (bcm63xx_detect_cfe(master))
return -EINVAL;
- cfelen = max_t(uint32_t, master->erasesize, BCM63XX_MIN_CFE_SIZE);
- nvramlen = max_t(uint32_t, master->erasesize, BCM63XX_MIN_NVRAM_SIZE);
+ cfe_erasesize = max_t(uint32_t, master->erasesize,
+ BCM63XX_CFE_BLOCK_SIZE);
+
+ cfelen = cfe_erasesize;
+ nvramlen = cfe_erasesize;
/* Allocate memory for buffer */
buf = vmalloc(sizeof(struct bcm_tag));
@@ -121,7 +123,6 @@
kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
rootfsaddr = rootfsaddr - BCM63XX_EXTENDED_SIZE;
spareaddr = roundup(totallen, master->erasesize) + cfelen;
- sparelen = master->size - spareaddr - nvramlen;
if (rootfsaddr < kerneladdr) {
/* default Broadcom layout */
@@ -139,19 +140,15 @@
rootfslen = 0;
rootfsaddr = 0;
spareaddr = cfelen;
- sparelen = master->size - cfelen - nvramlen;
}
+ sparelen = master->size - spareaddr - nvramlen;
/* Determine number of partitions */
- namelen = 8;
- if (rootfslen > 0) {
+ if (rootfslen > 0)
nrparts++;
- namelen += 6;
- }
- if (kernellen > 0) {
+
+ if (kernellen > 0)
nrparts++;
- namelen += 6;
- }
/* Ask kernel for more memory */
parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
@@ -193,17 +190,16 @@
parts[curpart].name = "nvram";
parts[curpart].offset = master->size - nvramlen;
parts[curpart].size = nvramlen;
+ curpart++;
/* Global partition "linux" to make easy firmware upgrade */
- curpart++;
parts[curpart].name = "linux";
parts[curpart].offset = cfelen;
parts[curpart].size = master->size - cfelen - nvramlen;
for (i = 0; i < nrparts; i++)
- pr_info("Partition %d is %s offset %lx and length %lx\n", i,
- parts[i].name, (long unsigned int)(parts[i].offset),
- (long unsigned int)(parts[i].size));
+ pr_info("Partition %d is %s offset %llx and length %llx\n", i,
+ parts[i].name, parts[i].offset, parts[i].size);
pr_info("Spare partition is offset %x and length %x\n", spareaddr,
sparelen);
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 5ff5c4a..b861972 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1536,8 +1536,20 @@
UDELAY(map, chip, adr, 1);
}
- /* reset on all failures. */
- map_write( map, CMD(0xF0), chip->start );
+ /*
+ * Recovery from write-buffer programming failures requires
+ * the write-to-buffer-reset sequence. Since the last part
+ * of the sequence also works as a normal reset, we can run
+ * the same commands regardless of why we are here.
+ * See e.g.
+ * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf
+ */
+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
+ cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi,
+ cfi->device_type, NULL);
+ cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi,
+ cfi->device_type, NULL);
xip_enable(map, chip, adr);
/* FIXME - should have reset delay before continuing */
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index aed1b8a..c533f27 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -56,8 +56,8 @@
/* special size referring to all the remaining space in a partition */
-#define SIZE_REMAINING UINT_MAX
-#define OFFSET_CONTINUOUS UINT_MAX
+#define SIZE_REMAINING ULLONG_MAX
+#define OFFSET_CONTINUOUS ULLONG_MAX
struct cmdline_mtd_partition {
struct cmdline_mtd_partition *next;
@@ -89,7 +89,7 @@
int extra_mem_size)
{
struct mtd_partition *parts;
- unsigned long size, offset = OFFSET_CONTINUOUS;
+ unsigned long long size, offset = OFFSET_CONTINUOUS;
char *name;
int name_len;
unsigned char *extra_mem;
@@ -104,7 +104,8 @@
} else {
size = memparse(s, &s);
if (size < PAGE_SIZE) {
- printk(KERN_ERR ERRP "partition size too small (%lx)\n", size);
+ printk(KERN_ERR ERRP "partition size too small (%llx)\n",
+ size);
return ERR_PTR(-EINVAL);
}
}
@@ -296,7 +297,7 @@
struct mtd_partition **pparts,
struct mtd_part_parser_data *data)
{
- unsigned long offset;
+ unsigned long long offset;
int i, err;
struct cmdline_mtd_partition *part;
const char *mtd_id = master->name;
@@ -308,48 +309,52 @@
return err;
}
+ /*
+ * Search for the partition definition matching master->name.
+ * If master->name is not set, stop at first partition definition.
+ */
for (part = partitions; part; part = part->next) {
- if ((!mtd_id) || (!strcmp(part->mtd_id, mtd_id))) {
- for (i = 0, offset = 0; i < part->num_parts; i++) {
- if (part->parts[i].offset == OFFSET_CONTINUOUS)
- part->parts[i].offset = offset;
- else
- offset = part->parts[i].offset;
-
- if (part->parts[i].size == SIZE_REMAINING)
- part->parts[i].size = master->size - offset;
-
- if (part->parts[i].size == 0) {
- printk(KERN_WARNING ERRP
- "%s: skipping zero sized partition\n",
- part->mtd_id);
- part->num_parts--;
- memmove(&part->parts[i],
- &part->parts[i + 1],
- sizeof(*part->parts) * (part->num_parts - i));
- continue;
- }
-
- if (offset + part->parts[i].size > master->size) {
- printk(KERN_WARNING ERRP
- "%s: partitioning exceeds flash size, truncating\n",
- part->mtd_id);
- part->parts[i].size = master->size - offset;
- }
- offset += part->parts[i].size;
- }
-
- *pparts = kmemdup(part->parts,
- sizeof(*part->parts) * part->num_parts,
- GFP_KERNEL);
- if (!*pparts)
- return -ENOMEM;
-
- return part->num_parts;
- }
+ if ((!mtd_id) || (!strcmp(part->mtd_id, mtd_id)))
+ break;
}
- return 0;
+ if (!part)
+ return 0;
+
+ for (i = 0, offset = 0; i < part->num_parts; i++) {
+ if (part->parts[i].offset == OFFSET_CONTINUOUS)
+ part->parts[i].offset = offset;
+ else
+ offset = part->parts[i].offset;
+
+ if (part->parts[i].size == SIZE_REMAINING)
+ part->parts[i].size = master->size - offset;
+
+ if (part->parts[i].size == 0) {
+ printk(KERN_WARNING ERRP
+ "%s: skipping zero sized partition\n",
+ part->mtd_id);
+ part->num_parts--;
+ memmove(&part->parts[i], &part->parts[i + 1],
+ sizeof(*part->parts) * (part->num_parts - i));
+ continue;
+ }
+
+ if (offset + part->parts[i].size > master->size) {
+ printk(KERN_WARNING ERRP
+ "%s: partitioning exceeds flash size, truncating\n",
+ part->mtd_id);
+ part->parts[i].size = master->size - offset;
+ }
+ offset += part->parts[i].size;
+ }
+
+ *pparts = kmemdup(part->parts, sizeof(*part->parts) * part->num_parts,
+ GFP_KERNEL);
+ if (!*pparts)
+ return -ENOMEM;
+
+ return part->num_parts;
}
diff --git a/drivers/mtd/devices/bcm47xxsflash.c b/drivers/mtd/devices/bcm47xxsflash.c
index 2dc5a6f..4714584 100644
--- a/drivers/mtd/devices/bcm47xxsflash.c
+++ b/drivers/mtd/devices/bcm47xxsflash.c
@@ -66,7 +66,7 @@
return err;
}
-static int __devexit bcm47xxsflash_remove(struct platform_device *pdev)
+static int bcm47xxsflash_remove(struct platform_device *pdev)
{
struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
@@ -77,7 +77,7 @@
}
static struct platform_driver bcma_sflash_driver = {
- .remove = __devexit_p(bcm47xxsflash_remove),
+ .remove = bcm47xxsflash_remove,
.driver = {
.name = "bcma_sflash",
.owner = THIS_MODULE,
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 681e2ee..e081bfe 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -62,6 +62,7 @@
memset(page_address(page), 0xff, PAGE_SIZE);
set_page_dirty(page);
unlock_page(page);
+ balance_dirty_pages_ratelimited(mapping);
break;
}
@@ -152,6 +153,7 @@
memcpy(page_address(page) + offset, buf, cpylen);
set_page_dirty(page);
unlock_page(page);
+ balance_dirty_pages_ratelimited(mapping);
}
page_cache_release(page);
@@ -433,7 +435,7 @@
}
-static void __devexit block2mtd_exit(void)
+static void block2mtd_exit(void)
{
struct list_head *pos, *next;
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index d34d83b..8510ccb 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -1440,7 +1440,7 @@
oobdelta = mtd->ecclayout->oobavail;
break;
default:
- oobdelta = 0;
+ return -EINVAL;
}
if ((len % DOC_LAYOUT_PAGE_SIZE) || (ooblen % oobdelta) ||
(ofs % DOC_LAYOUT_PAGE_SIZE))
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index 706b847..88b3fd3 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -70,8 +70,6 @@
0xe0000, 0xe2000, 0xe4000, 0xe6000,
0xe8000, 0xea000, 0xec000, 0xee000,
#endif /* CONFIG_MTD_DOCPROBE_HIGH */
-#else
-#warning Unknown architecture for DiskOnChip. No default probe locations defined
#endif
0xffffffff };
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 03838ba..4eeeb2d 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -73,14 +73,6 @@
#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */
#define MAX_CMD_SIZE 5
-#ifdef CONFIG_M25PXX_USE_FAST_READ
-#define OPCODE_READ OPCODE_FAST_READ
-#define FAST_READ_DUMMY_BYTE 1
-#else
-#define OPCODE_READ OPCODE_NORM_READ
-#define FAST_READ_DUMMY_BYTE 0
-#endif
-
#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16)
/****************************************************************************/
@@ -93,6 +85,7 @@
u16 addr_width;
u8 erase_opcode;
u8 *command;
+ bool fast_read;
};
static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
@@ -168,6 +161,7 @@
{
switch (JEDEC_MFR(jedec_id)) {
case CFI_MFR_MACRONIX:
+ case 0xEF /* winbond */:
flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B;
return spi_write(flash->spi, flash->command, 1);
default:
@@ -342,6 +336,7 @@
struct m25p *flash = mtd_to_m25p(mtd);
struct spi_transfer t[2];
struct spi_message m;
+ uint8_t opcode;
pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
__func__, (u32)from, len);
@@ -354,7 +349,7 @@
* Should add 1 byte DUMMY_BYTE.
*/
t[0].tx_buf = flash->command;
- t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
+ t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0);
spi_message_add_tail(&t[0], &m);
t[1].rx_buf = buf;
@@ -376,12 +371,14 @@
*/
/* Set up the write data buffer. */
- flash->command[0] = OPCODE_READ;
+ opcode = flash->fast_read ? OPCODE_FAST_READ : OPCODE_NORM_READ;
+ flash->command[0] = opcode;
m25p_addr2cmd(flash, from, flash->command);
spi_sync(flash->spi, &m);
- *retlen = m.actual_length - m25p_cmdsz(flash) - FAST_READ_DUMMY_BYTE;
+ *retlen = m.actual_length - m25p_cmdsz(flash) -
+ (flash->fast_read ? 1 : 0);
mutex_unlock(&flash->lock);
@@ -664,7 +661,8 @@
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
/* Micron */
- { "n25q128", INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
+ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) },
+ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
{ "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) },
/* Spansion -- single (large) sector size only, at least
@@ -745,6 +743,8 @@
{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
{ "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
+ { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
+ { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },
/* Catalyst / On Semiconductor -- non-JEDEC */
{ "cat25c11", CAT25_INFO( 16, 8, 16, 1) },
@@ -756,7 +756,7 @@
};
MODULE_DEVICE_TABLE(spi, m25p_ids);
-static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi)
+static const struct spi_device_id *jedec_probe(struct spi_device *spi)
{
int tmp;
u8 code = OPCODE_RDID;
@@ -801,7 +801,7 @@
* matches what the READ command supports, at least until this driver
* understands FAST_READ (for clocks over 25 MHz).
*/
-static int __devinit m25p_probe(struct spi_device *spi)
+static int m25p_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
struct flash_platform_data *data;
@@ -809,9 +809,10 @@
struct flash_info *info;
unsigned i;
struct mtd_part_parser_data ppdata;
+ struct device_node __maybe_unused *np = spi->dev.of_node;
#ifdef CONFIG_MTD_OF_PARTS
- if (!of_device_is_available(spi->dev.of_node))
+ if (!of_device_is_available(np))
return -ENODEV;
#endif
@@ -863,7 +864,8 @@
flash = kzalloc(sizeof *flash, GFP_KERNEL);
if (!flash)
return -ENOMEM;
- flash->command = kmalloc(MAX_CMD_SIZE + FAST_READ_DUMMY_BYTE, GFP_KERNEL);
+ flash->command = kmalloc(MAX_CMD_SIZE + (flash->fast_read ? 1 : 0),
+ GFP_KERNEL);
if (!flash->command) {
kfree(flash);
return -ENOMEM;
@@ -920,6 +922,16 @@
flash->page_size = info->page_size;
flash->mtd.writebufsize = flash->page_size;
+ flash->fast_read = false;
+#ifdef CONFIG_OF
+ if (np && of_property_read_bool(np, "m25p,fast-read"))
+ flash->fast_read = true;
+#endif
+
+#ifdef CONFIG_M25PXX_USE_FAST_READ
+ flash->fast_read = true;
+#endif
+
if (info->addr_width)
flash->addr_width = info->addr_width;
else {
@@ -961,7 +973,7 @@
}
-static int __devexit m25p_remove(struct spi_device *spi)
+static int m25p_remove(struct spi_device *spi)
{
struct m25p *flash = dev_get_drvdata(&spi->dev);
int status;
@@ -983,7 +995,7 @@
},
.id_table = m25p_ids,
.probe = m25p_probe,
- .remove = __devexit_p(m25p_remove),
+ .remove = m25p_remove,
/* REVISIT: many of these chips have deep power-down modes, which
* should clearly be entered on suspend() to minimize power use.
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 928fb0e..ea7ea7b 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -618,7 +618,7 @@
/*
* Register DataFlash device with MTD subsystem.
*/
-static int __devinit
+static int
add_dataflash_otp(struct spi_device *spi, char *name,
int nr_pages, int pagesize, int pageoffset, char revision)
{
@@ -679,7 +679,7 @@
return err;
}
-static inline int __devinit
+static inline int
add_dataflash(struct spi_device *spi, char *name,
int nr_pages, int pagesize, int pageoffset)
{
@@ -705,7 +705,7 @@
#define IS_POW2PS 0x0001 /* uses 2^N byte pages */
};
-static struct flash_info __devinitdata dataflash_data [] = {
+static struct flash_info dataflash_data[] = {
/*
* NOTE: chips with SUP_POW2PS (rev D and up) need two entries,
@@ -740,7 +740,7 @@
{ "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
};
-static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
+static struct flash_info *jedec_probe(struct spi_device *spi)
{
int tmp;
uint8_t code = OP_READ_ID;
@@ -823,7 +823,7 @@
* AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11
* AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
*/
-static int __devinit dataflash_probe(struct spi_device *spi)
+static int dataflash_probe(struct spi_device *spi)
{
int status;
struct flash_info *info;
@@ -897,7 +897,7 @@
return status;
}
-static int __devexit dataflash_remove(struct spi_device *spi)
+static int dataflash_remove(struct spi_device *spi)
{
struct dataflash *flash = dev_get_drvdata(&spi->dev);
int status;
@@ -920,7 +920,7 @@
},
.probe = dataflash_probe,
- .remove = __devexit_p(dataflash_remove),
+ .remove = dataflash_remove,
/* FIXME: investigate suspend and resume... */
};
diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index dcc3c95..2d2c2a5 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -756,7 +756,7 @@
#ifdef CONFIG_OF
-static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev,
+static int spear_smi_probe_config_dt(struct platform_device *pdev,
struct device_node *np)
{
struct spear_smi_plat_data *pdata = dev_get_platdata(&pdev->dev);
@@ -799,7 +799,7 @@
return 0;
}
#else
-static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev,
+static int spear_smi_probe_config_dt(struct platform_device *pdev,
struct device_node *np)
{
return -ENOSYS;
@@ -901,7 +901,7 @@
* and do proper init for any found one.
* Returns 0 on success, non zero otherwise
*/
-static int __devinit spear_smi_probe(struct platform_device *pdev)
+static int spear_smi_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct spear_smi_plat_data *pdata = NULL;
@@ -1016,7 +1016,7 @@
*
* free all allocations and delete the partitions.
*/
-static int __devexit spear_smi_remove(struct platform_device *pdev)
+static int spear_smi_remove(struct platform_device *pdev)
{
struct spear_smi *dev;
struct spear_snor_flash *flash;
@@ -1092,20 +1092,9 @@
#endif
},
.probe = spear_smi_probe,
- .remove = __devexit_p(spear_smi_remove),
+ .remove = spear_smi_remove,
};
-
-static int spear_smi_init(void)
-{
- return platform_driver_register(&spear_smi_driver);
-}
-module_init(spear_smi_init);
-
-static void spear_smi_exit(void)
-{
- platform_driver_unregister(&spear_smi_driver);
-}
-module_exit(spear_smi_exit);
+module_platform_driver(spear_smi_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.hashim@st.com>");
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index ab8a2f4c..8091b01 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -64,7 +64,7 @@
#define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
-static struct flash_info __devinitdata sst25l_flash_info[] = {
+static struct flash_info sst25l_flash_info[] = {
{"sst25lf020a", 0xbf43, 256, 1024, 4096},
{"sst25lf040a", 0xbf44, 256, 2048, 4096},
};
@@ -313,7 +313,7 @@
return ret;
}
-static struct flash_info *__devinit sst25l_match_device(struct spi_device *spi)
+static struct flash_info *sst25l_match_device(struct spi_device *spi)
{
struct flash_info *flash_info = NULL;
struct spi_message m;
@@ -353,7 +353,7 @@
return flash_info;
}
-static int __devinit sst25l_probe(struct spi_device *spi)
+static int sst25l_probe(struct spi_device *spi)
{
struct flash_info *flash_info;
struct sst25l_flash *flash;
@@ -411,7 +411,7 @@
return 0;
}
-static int __devexit sst25l_remove(struct spi_device *spi)
+static int sst25l_remove(struct spi_device *spi)
{
struct sst25l_flash *flash = dev_get_drvdata(&spi->dev);
int ret;
@@ -428,7 +428,7 @@
.owner = THIS_MODULE,
},
.probe = sst25l_probe,
- .remove = __devexit_p(sst25l_remove),
+ .remove = sst25l_remove,
};
module_spi_driver(sst25l_driver);
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index df30486..62ba82c 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -358,13 +358,6 @@
IXP2000 based board and would like to use the flash chips on it,
say 'Y'.
-config MTD_FORTUNET
- tristate "CFI Flash device mapped on the FortuNet board"
- depends on MTD_CFI && SA1100_FORTUNET
- help
- This enables access to the Flash on the FortuNet board. If you
- have such a board, say 'Y'.
-
config MTD_AUTCPU12
bool "NV-RAM mapping AUTCPU12 board"
depends on ARCH_AUTCPU12
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index a0240ed..4ded287 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -39,7 +39,6 @@
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
obj-$(CONFIG_MTD_IMPA7) += impa7.o
-obj-$(CONFIG_MTD_FORTUNET) += fortunet.o
obj-$(CONFIG_MTD_UCLINUX) += uclinux.o
obj-$(CONFIG_MTD_NETtel) += nettel.o
obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index e2875d6f..f7207b0 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -100,8 +100,8 @@
}
-static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int amd76xrom_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
u8 byte;
@@ -289,7 +289,7 @@
}
-static void __devexit amd76xrom_remove_one (struct pci_dev *pdev)
+static void amd76xrom_remove_one(struct pci_dev *pdev)
{
struct amd76xrom_window *window = &amd76xrom_window;
@@ -347,4 +347,3 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Eric Biederman <ebiederman@lnxi.com>");
MODULE_DESCRIPTION("MTD map driver for BIOS chips on the AMD76X southbridge");
-
diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c
index 76fb594..a2dc2ae 100644
--- a/drivers/mtd/maps/autcpu12-nvram.c
+++ b/drivers/mtd/maps/autcpu12-nvram.c
@@ -33,7 +33,7 @@
struct map_info map;
};
-static int __devinit autcpu12_nvram_probe(struct platform_device *pdev)
+static int autcpu12_nvram_probe(struct platform_device *pdev)
{
map_word tmp, save0, save1;
struct resource *res;
@@ -105,7 +105,7 @@
return -ENOMEM;
}
-static int __devexit autcpu12_nvram_remove(struct platform_device *pdev)
+static int autcpu12_nvram_remove(struct platform_device *pdev)
{
struct autcpu12_nvram_priv *priv = platform_get_drvdata(pdev);
@@ -121,7 +121,7 @@
.owner = THIS_MODULE,
},
.probe = autcpu12_nvram_probe,
- .remove = __devexit_p(autcpu12_nvram_remove),
+ .remove = autcpu12_nvram_remove,
};
module_platform_driver(autcpu12_nvram_driver);
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
index ef5cde8..f833edf 100644
--- a/drivers/mtd/maps/bfin-async-flash.c
+++ b/drivers/mtd/maps/bfin-async-flash.c
@@ -30,7 +30,8 @@
#include <linux/io.h>
#include <asm/unaligned.h>
-#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_devinit(fmt, args...) \
+ ({ static const char __fmt[] = fmt; printk(__fmt, ## args); })
#define DRIVER_NAME "bfin-async-flash"
@@ -123,7 +124,7 @@
static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
-static int __devinit bfin_flash_probe(struct platform_device *pdev)
+static int bfin_flash_probe(struct platform_device *pdev)
{
int ret;
struct physmap_flash_data *pdata = pdev->dev.platform_data;
@@ -172,7 +173,7 @@
return 0;
}
-static int __devexit bfin_flash_remove(struct platform_device *pdev)
+static int bfin_flash_remove(struct platform_device *pdev)
{
struct async_state *state = platform_get_drvdata(pdev);
gpio_free(state->enet_flash_pin);
@@ -184,7 +185,7 @@
static struct platform_driver bfin_flash_driver = {
.probe = bfin_flash_probe,
- .remove = __devexit_p(bfin_flash_remove),
+ .remove = bfin_flash_remove,
.driver = {
.name = DRIVER_NAME,
},
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c
index 3d0e762..586a1c7 100644
--- a/drivers/mtd/maps/ck804xrom.c
+++ b/drivers/mtd/maps/ck804xrom.c
@@ -112,8 +112,8 @@
}
-static int __devinit ck804xrom_init_one (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int ck804xrom_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
u8 byte;
@@ -320,7 +320,7 @@
}
-static void __devexit ck804xrom_remove_one (struct pci_dev *pdev)
+static void ck804xrom_remove_one(struct pci_dev *pdev)
{
struct ck804xrom_window *window = &ck804xrom_window;
diff --git a/drivers/mtd/maps/esb2rom.c b/drivers/mtd/maps/esb2rom.c
index 08322b1..ff8681a 100644
--- a/drivers/mtd/maps/esb2rom.c
+++ b/drivers/mtd/maps/esb2rom.c
@@ -144,7 +144,7 @@
pci_dev_put(window->pdev);
}
-static int __devinit esb2rom_init_one(struct pci_dev *pdev,
+static int esb2rom_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
@@ -378,13 +378,13 @@
return 0;
}
-static void __devexit esb2rom_remove_one (struct pci_dev *pdev)
+static void esb2rom_remove_one(struct pci_dev *pdev)
{
struct esb2rom_window *window = &esb2rom_window;
esb2rom_cleanup(window);
}
-static struct pci_device_id esb2rom_pci_tbl[] __devinitdata = {
+static struct pci_device_id esb2rom_pci_tbl[] = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,
PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
diff --git a/drivers/mtd/maps/fortunet.c b/drivers/mtd/maps/fortunet.c
deleted file mode 100644
index 956e2e4..0000000
--- a/drivers/mtd/maps/fortunet.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/* fortunet.c memory map
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#define MAX_NUM_REGIONS 4
-#define MAX_NUM_PARTITIONS 8
-
-#define DEF_WINDOW_ADDR_PHY 0x00000000
-#define DEF_WINDOW_SIZE 0x00800000 // 8 Mega Bytes
-
-#define MTD_FORTUNET_PK "MTD FortuNet: "
-
-#define MAX_NAME_SIZE 128
-
-struct map_region
-{
- int window_addr_physical;
- int altbankwidth;
- struct map_info map_info;
- struct mtd_info *mymtd;
- struct mtd_partition parts[MAX_NUM_PARTITIONS];
- char map_name[MAX_NAME_SIZE];
- char parts_name[MAX_NUM_PARTITIONS][MAX_NAME_SIZE];
-};
-
-static struct map_region map_regions[MAX_NUM_REGIONS];
-static int map_regions_set[MAX_NUM_REGIONS] = {0,0,0,0};
-static int map_regions_parts[MAX_NUM_REGIONS] = {0,0,0,0};
-
-
-
-struct map_info default_map = {
- .size = DEF_WINDOW_SIZE,
- .bankwidth = 4,
-};
-
-static char * __init get_string_option(char *dest,int dest_size,char *sor)
-{
- if(!dest_size)
- return sor;
- dest_size--;
- while(*sor)
- {
- if(*sor==',')
- {
- sor++;
- break;
- }
- else if(*sor=='\"')
- {
- sor++;
- while(*sor)
- {
- if(*sor=='\"')
- {
- sor++;
- break;
- }
- *dest = *sor;
- dest++;
- sor++;
- dest_size--;
- if(!dest_size)
- {
- *dest = 0;
- return sor;
- }
- }
- }
- else
- {
- *dest = *sor;
- dest++;
- sor++;
- dest_size--;
- if(!dest_size)
- {
- *dest = 0;
- return sor;
- }
- }
- }
- *dest = 0;
- return sor;
-}
-
-static int __init MTD_New_Region(char *line)
-{
- char string[MAX_NAME_SIZE];
- int params[6];
- get_options (get_string_option(string,sizeof(string),line),6,params);
- if(params[0]<1)
- {
- printk(MTD_FORTUNET_PK "Bad parameters for MTD Region "
- " name,region-number[,base,size,bankwidth,altbankwidth]\n");
- return 1;
- }
- if((params[1]<0)||(params[1]>=MAX_NUM_REGIONS))
- {
- printk(MTD_FORTUNET_PK "Bad region index of %d only have 0..%u regions\n",
- params[1],MAX_NUM_REGIONS-1);
- return 1;
- }
- memset(&map_regions[params[1]],0,sizeof(map_regions[params[1]]));
- memcpy(&map_regions[params[1]].map_info,
- &default_map,sizeof(map_regions[params[1]].map_info));
- map_regions_set[params[1]] = 1;
- map_regions[params[1]].window_addr_physical = DEF_WINDOW_ADDR_PHY;
- map_regions[params[1]].altbankwidth = 2;
- map_regions[params[1]].mymtd = NULL;
- map_regions[params[1]].map_info.name = map_regions[params[1]].map_name;
- strcpy(map_regions[params[1]].map_info.name,string);
- if(params[0]>1)
- {
- map_regions[params[1]].window_addr_physical = params[2];
- }
- if(params[0]>2)
- {
- map_regions[params[1]].map_info.size = params[3];
- }
- if(params[0]>3)
- {
- map_regions[params[1]].map_info.bankwidth = params[4];
- }
- if(params[0]>4)
- {
- map_regions[params[1]].altbankwidth = params[5];
- }
- return 1;
-}
-
-static int __init MTD_New_Partition(char *line)
-{
- char string[MAX_NAME_SIZE];
- int params[4];
- get_options (get_string_option(string,sizeof(string),line),4,params);
- if(params[0]<3)
- {
- printk(MTD_FORTUNET_PK "Bad parameters for MTD Partition "
- " name,region-number,size,offset\n");
- return 1;
- }
- if((params[1]<0)||(params[1]>=MAX_NUM_REGIONS))
- {
- printk(MTD_FORTUNET_PK "Bad region index of %d only have 0..%u regions\n",
- params[1],MAX_NUM_REGIONS-1);
- return 1;
- }
- if(map_regions_parts[params[1]]>=MAX_NUM_PARTITIONS)
- {
- printk(MTD_FORTUNET_PK "Out of space for partition in this region\n");
- return 1;
- }
- map_regions[params[1]].parts[map_regions_parts[params[1]]].name =
- map_regions[params[1]]. parts_name[map_regions_parts[params[1]]];
- strcpy(map_regions[params[1]].parts[map_regions_parts[params[1]]].name,string);
- map_regions[params[1]].parts[map_regions_parts[params[1]]].size =
- params[2];
- map_regions[params[1]].parts[map_regions_parts[params[1]]].offset =
- params[3];
- map_regions[params[1]].parts[map_regions_parts[params[1]]].mask_flags = 0;
- map_regions_parts[params[1]]++;
- return 1;
-}
-
-__setup("MTD_Region=", MTD_New_Region);
-__setup("MTD_Partition=", MTD_New_Partition);
-
-/* Backwards-spelling-compatibility */
-__setup("MTD_Partion=", MTD_New_Partition);
-
-static int __init init_fortunet(void)
-{
- int ix,iy;
- for(iy=ix=0;ix<MAX_NUM_REGIONS;ix++)
- {
- if(map_regions_parts[ix]&&(!map_regions_set[ix]))
- {
- printk(MTD_FORTUNET_PK "Region %d is not setup (Setting to default)\n",
- ix);
- memset(&map_regions[ix],0,sizeof(map_regions[ix]));
- memcpy(&map_regions[ix].map_info,&default_map,
- sizeof(map_regions[ix].map_info));
- map_regions_set[ix] = 1;
- map_regions[ix].window_addr_physical = DEF_WINDOW_ADDR_PHY;
- map_regions[ix].altbankwidth = 2;
- map_regions[ix].mymtd = NULL;
- map_regions[ix].map_info.name = map_regions[ix].map_name;
- strcpy(map_regions[ix].map_info.name,"FORTUNET");
- }
- if(map_regions_set[ix])
- {
- iy++;
- printk(KERN_NOTICE MTD_FORTUNET_PK "%s flash device at physically "
- " address %x size %x\n",
- map_regions[ix].map_info.name,
- map_regions[ix].window_addr_physical,
- map_regions[ix].map_info.size);
-
- map_regions[ix].map_info.phys = map_regions[ix].window_addr_physical,
-
- map_regions[ix].map_info.virt =
- ioremap_nocache(
- map_regions[ix].window_addr_physical,
- map_regions[ix].map_info.size);
- if(!map_regions[ix].map_info.virt)
- {
- int j = 0;
- printk(MTD_FORTUNET_PK "%s flash failed to ioremap!\n",
- map_regions[ix].map_info.name);
- for (j = 0 ; j < ix; j++)
- iounmap(map_regions[j].map_info.virt);
- return -ENXIO;
- }
- simple_map_init(&map_regions[ix].map_info);
-
- printk(KERN_NOTICE MTD_FORTUNET_PK "%s flash is virtually at: %x\n",
- map_regions[ix].map_info.name,
- map_regions[ix].map_info.virt);
- map_regions[ix].mymtd = do_map_probe("cfi_probe",
- &map_regions[ix].map_info);
- if((!map_regions[ix].mymtd)&&(
- map_regions[ix].altbankwidth!=map_regions[ix].map_info.bankwidth))
- {
- printk(KERN_NOTICE MTD_FORTUNET_PK "Trying alternate bankwidth "
- "for %s flash.\n",
- map_regions[ix].map_info.name);
- map_regions[ix].map_info.bankwidth =
- map_regions[ix].altbankwidth;
- map_regions[ix].mymtd = do_map_probe("cfi_probe",
- &map_regions[ix].map_info);
- }
- map_regions[ix].mymtd->owner = THIS_MODULE;
- mtd_device_register(map_regions[ix].mymtd,
- map_regions[ix].parts,
- map_regions_parts[ix]);
- }
- }
- if(iy)
- return 0;
- return -ENXIO;
-}
-
-static void __exit cleanup_fortunet(void)
-{
- int ix;
- for(ix=0;ix<MAX_NUM_REGIONS;ix++)
- {
- if(map_regions_set[ix])
- {
- if( map_regions[ix].mymtd )
- {
- mtd_device_unregister(map_regions[ix].mymtd);
- map_destroy( map_regions[ix].mymtd );
- }
- iounmap((void *)map_regions[ix].map_info.virt);
- }
- }
-}
-
-module_init(init_fortunet);
-module_exit(cleanup_fortunet);
-
-MODULE_AUTHOR("FortuNet, Inc.");
-MODULE_DESCRIPTION("MTD map driver for FortuNet boards");
diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
index e4de96b..7b643de 100644
--- a/drivers/mtd/maps/gpio-addr-flash.c
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -26,7 +26,8 @@
#include <linux/slab.h>
#include <linux/types.h>
-#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_devinit(fmt, args...) \
+ ({ static const char __fmt[] = fmt; printk(__fmt, ## args); })
#define DRIVER_NAME "gpio-addr-flash"
#define PFX DRIVER_NAME ": "
@@ -142,7 +143,8 @@
*
* See gf_copy_from() caveat.
*/
-static void gf_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+static void gf_copy_to(struct map_info *map, unsigned long to,
+ const void *from, ssize_t len)
{
struct async_state *state = gf_map_info_to_state(map);
@@ -185,7 +187,7 @@
* ...
* };
*/
-static int __devinit gpio_flash_probe(struct platform_device *pdev)
+static int gpio_flash_probe(struct platform_device *pdev)
{
size_t i, arr_size;
struct physmap_flash_data *pdata;
@@ -258,7 +260,7 @@
return 0;
}
-static int __devexit gpio_flash_remove(struct platform_device *pdev)
+static int gpio_flash_remove(struct platform_device *pdev)
{
struct async_state *state = platform_get_drvdata(pdev);
size_t i = 0;
@@ -273,7 +275,7 @@
static struct platform_driver gpio_flash_driver = {
.probe = gpio_flash_probe,
- .remove = __devexit_p(gpio_flash_remove),
+ .remove = gpio_flash_remove,
.driver = {
.name = DRIVER_NAME,
},
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index 6689dcb..c7478e1 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -84,8 +84,8 @@
}
-static int __devinit ichxrom_init_one (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int ichxrom_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
struct ichxrom_window *window = &ichxrom_window;
@@ -315,13 +315,13 @@
}
-static void __devexit ichxrom_remove_one (struct pci_dev *pdev)
+static void ichxrom_remove_one(struct pci_dev *pdev)
{
struct ichxrom_window *window = &ichxrom_window;
ichxrom_cleanup(window);
}
-static struct pci_device_id ichxrom_pci_tbl[] __devinitdata = {
+static struct pci_device_id ichxrom_pci_tbl[] = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,
PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c
index 93f0317..3ee2ad1 100644
--- a/drivers/mtd/maps/intel_vr_nor.c
+++ b/drivers/mtd/maps/intel_vr_nor.c
@@ -63,24 +63,24 @@
#define TIMING_BYTE_EN (1 << 0) /* 8-bit vs 16-bit bus */
#define TIMING_MASK 0x3FFF0000
-static void __devexit vr_nor_destroy_partitions(struct vr_nor_mtd *p)
+static void vr_nor_destroy_partitions(struct vr_nor_mtd *p)
{
mtd_device_unregister(p->info);
}
-static int __devinit vr_nor_init_partitions(struct vr_nor_mtd *p)
+static int vr_nor_init_partitions(struct vr_nor_mtd *p)
{
/* register the flash bank */
/* partition the flash bank */
return mtd_device_parse_register(p->info, NULL, NULL, NULL, 0);
}
-static void __devexit vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p)
+static void vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p)
{
map_destroy(p->info);
}
-static int __devinit vr_nor_mtd_setup(struct vr_nor_mtd *p)
+static int vr_nor_mtd_setup(struct vr_nor_mtd *p)
{
static const char *probe_types[] =
{ "cfi_probe", "jedec_probe", NULL };
@@ -96,7 +96,7 @@
return 0;
}
-static void __devexit vr_nor_destroy_maps(struct vr_nor_mtd *p)
+static void vr_nor_destroy_maps(struct vr_nor_mtd *p)
{
unsigned int exp_timing_cs0;
@@ -116,7 +116,7 @@
* Initialize the map_info structure and map the flash.
* Returns 0 on success, nonzero otherwise.
*/
-static int __devinit vr_nor_init_maps(struct vr_nor_mtd *p)
+static int vr_nor_init_maps(struct vr_nor_mtd *p)
{
unsigned long csr_phys, csr_len;
unsigned long win_phys, win_len;
@@ -176,7 +176,7 @@
{0,}
};
-static void __devexit vr_nor_pci_remove(struct pci_dev *dev)
+static void vr_nor_pci_remove(struct pci_dev *dev)
{
struct vr_nor_mtd *p = pci_get_drvdata(dev);
@@ -189,7 +189,7 @@
pci_disable_device(dev);
}
-static int __devinit
+static int
vr_nor_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct vr_nor_mtd *p = NULL;
@@ -256,7 +256,7 @@
static struct pci_driver vr_nor_pci_driver = {
.name = DRV_NAME,
.probe = vr_nor_pci_probe,
- .remove = __devexit_p(vr_nor_pci_remove),
+ .remove = vr_nor_pci_remove,
.id_table = vr_nor_pci_ids,
};
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
index c03456f..3c3c791 100644
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -45,7 +45,7 @@
};
static const char ltq_map_name[] = "ltq_nor";
-static const char *ltq_probe_types[] __devinitconst = {
+static const char *ltq_probe_types[] = {
"cmdlinepart", "ofpart", NULL };
static map_word
@@ -109,7 +109,7 @@
spin_unlock_irqrestore(&ebu_lock, flags);
}
-static int __devinit
+static int
ltq_mtd_probe(struct platform_device *pdev)
{
struct mtd_part_parser_data ppdata;
@@ -185,7 +185,7 @@
return err;
}
-static int __devexit
+static int
ltq_mtd_remove(struct platform_device *pdev)
{
struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
@@ -209,7 +209,7 @@
static struct platform_driver ltq_mtd_driver = {
.probe = ltq_mtd_probe,
- .remove = __devexit_p(ltq_mtd_remove),
+ .remove = ltq_mtd_remove,
.driver = {
.name = "ltq-nor",
.owner = THIS_MODULE,
diff --git a/drivers/mtd/maps/latch-addr-flash.c b/drivers/mtd/maps/latch-addr-flash.c
index 3c7ad17..ab0fead5 100644
--- a/drivers/mtd/maps/latch-addr-flash.c
+++ b/drivers/mtd/maps/latch-addr-flash.c
@@ -125,7 +125,7 @@
return 0;
}
-static int __devinit latch_addr_flash_probe(struct platform_device *dev)
+static int latch_addr_flash_probe(struct platform_device *dev)
{
struct latch_addr_flash_data *latch_addr_data;
struct latch_addr_flash_info *info;
@@ -218,7 +218,7 @@
static struct platform_driver latch_addr_flash_driver = {
.probe = latch_addr_flash_probe,
- .remove = __devexit_p(latch_addr_flash_remove),
+ .remove = latch_addr_flash_remove,
.driver = {
.name = DRIVER_NAME,
},
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index 1c30c1a..ed82914 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -253,7 +253,7 @@
* Generic code follows.
*/
-static int __devinit
+static int
mtd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct mtd_pci_info *info = (struct mtd_pci_info *)id->driver_data;
@@ -308,7 +308,7 @@
return err;
}
-static void __devexit
+static void
mtd_pci_remove(struct pci_dev *dev)
{
struct mtd_info *mtd = pci_get_drvdata(dev);
@@ -326,7 +326,7 @@
static struct pci_driver mtd_pci_driver = {
.name = "MTD PCI",
.probe = mtd_pci_probe,
- .remove = __devexit_p(mtd_pci_remove),
+ .remove = mtd_pci_remove,
.id_table = mtd_pci_ids,
};
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 6f19aca..37cdc20 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -77,7 +77,7 @@
/* Helper function to handle probing of the obsolete "direct-mapped"
* compatible binding, which has an extra "probe-type" property
* describing the type of flash probe necessary. */
-static struct mtd_info * __devinit obsolete_probe(struct platform_device *dev,
+static struct mtd_info *obsolete_probe(struct platform_device *dev,
struct map_info *map)
{
struct device_node *dp = dev->dev.of_node;
@@ -116,7 +116,7 @@
information. */
static const char *part_probe_types_def[] = { "cmdlinepart", "RedBoot",
"ofpart", "ofoldpart", NULL };
-static const char ** __devinit of_get_probes(struct device_node *dp)
+static const char **of_get_probes(struct device_node *dp)
{
const char *cp;
int cplen;
@@ -145,14 +145,14 @@
return res;
}
-static void __devinit of_free_probes(const char **probes)
+static void of_free_probes(const char **probes)
{
if (probes != part_probe_types_def)
kfree(probes);
}
static struct of_device_id of_flash_match[];
-static int __devinit of_flash_probe(struct platform_device *dev)
+static int of_flash_probe(struct platform_device *dev)
{
const char **part_probe_types;
const struct of_device_id *match;
@@ -170,6 +170,7 @@
resource_size_t res_size;
struct mtd_part_parser_data ppdata;
bool map_indirect;
+ const char *mtd_name;
match = of_match_device(of_flash_match, &dev->dev);
if (!match)
@@ -178,6 +179,8 @@
reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32);
+ of_property_read_string(dp, "linux,mtd-name", &mtd_name);
+
/*
* Get number of "reg" tuples. Scan for MTD devices on area's
* described by each "reg" region. This makes it possible (including
@@ -234,7 +237,7 @@
goto err_out;
}
- info->list[i].map.name = dev_name(&dev->dev);
+ info->list[i].map.name = mtd_name ?: dev_name(&dev->dev);
info->list[i].map.phys = res.start;
info->list[i].map.size = res_size;
info->list[i].map.bankwidth = be32_to_cpup(width);
@@ -282,6 +285,7 @@
}
err = 0;
+ info->cmtd = NULL;
if (info->list_size == 1) {
info->cmtd = info->list[0].mtd;
} else if (info->list_size > 1) {
@@ -290,9 +294,10 @@
*/
info->cmtd = mtd_concat_create(mtd_list, info->list_size,
dev_name(&dev->dev));
- if (info->cmtd == NULL)
- err = -ENXIO;
}
+ if (info->cmtd == NULL)
+ err = -ENXIO;
+
if (err)
goto err_out;
diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c
index 65bd1cd..afea93b 100644
--- a/drivers/mtd/maps/pismo.c
+++ b/drivers/mtd/maps/pismo.c
@@ -58,7 +58,7 @@
pismo->vpp(pismo->vpp_data, on);
}
-static unsigned int __devinit pismo_width_to_bytes(unsigned int width)
+static unsigned int pismo_width_to_bytes(unsigned int width)
{
width &= 15;
if (width > 2)
@@ -66,7 +66,7 @@
return 1 << width;
}
-static int __devinit pismo_eeprom_read(struct i2c_client *client, void *buf,
+static int pismo_eeprom_read(struct i2c_client *client, void *buf,
u8 addr, size_t size)
{
int ret;
@@ -88,7 +88,7 @@
return ret == ARRAY_SIZE(msg) ? size : -EIO;
}
-static int __devinit pismo_add_device(struct pismo_data *pismo, int i,
+static int pismo_add_device(struct pismo_data *pismo, int i,
struct pismo_mem *region, const char *name, void *pdata, size_t psize)
{
struct platform_device *dev;
@@ -129,7 +129,7 @@
return ret;
}
-static int __devinit pismo_add_nor(struct pismo_data *pismo, int i,
+static int pismo_add_nor(struct pismo_data *pismo, int i,
struct pismo_mem *region)
{
struct physmap_flash_data data = {
@@ -143,7 +143,7 @@
&data, sizeof(data));
}
-static int __devinit pismo_add_sram(struct pismo_data *pismo, int i,
+static int pismo_add_sram(struct pismo_data *pismo, int i,
struct pismo_mem *region)
{
struct platdata_mtd_ram data = {
@@ -154,7 +154,7 @@
&data, sizeof(data));
}
-static void __devinit pismo_add_one(struct pismo_data *pismo, int i,
+static void pismo_add_one(struct pismo_data *pismo, int i,
const struct pismo_cs_block *cs, phys_addr_t base)
{
struct device *dev = &pismo->client->dev;
@@ -197,7 +197,7 @@
}
}
-static int __devexit pismo_remove(struct i2c_client *client)
+static int pismo_remove(struct i2c_client *client)
{
struct pismo_data *pismo = i2c_get_clientdata(client);
int i;
@@ -210,7 +210,7 @@
return 0;
}
-static int __devinit pismo_probe(struct i2c_client *client,
+static int pismo_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
@@ -267,7 +267,7 @@
.owner = THIS_MODULE,
},
.probe = pismo_probe,
- .remove = __devexit_p(pismo_remove),
+ .remove = pismo_remove,
.id_table = pismo_id,
};
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index 81884c2..43e3dbb 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -49,7 +49,7 @@
static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
+static int pxa2xx_flash_probe(struct platform_device *pdev)
{
struct flash_platform_data *flash = pdev->dev.platform_data;
struct pxa2xx_flash_info *info;
@@ -105,7 +105,7 @@
return 0;
}
-static int __devexit pxa2xx_flash_remove(struct platform_device *dev)
+static int pxa2xx_flash_remove(struct platform_device *dev)
{
struct pxa2xx_flash_info *info = platform_get_drvdata(dev);
@@ -139,7 +139,7 @@
.owner = THIS_MODULE,
},
.probe = pxa2xx_flash_probe,
- .remove = __devexit_p(pxa2xx_flash_remove),
+ .remove = pxa2xx_flash_remove,
.shutdown = pxa2xx_flash_shutdown,
};
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index a675bdb..f694417 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -149,8 +149,8 @@
plat->exit();
}
-static struct sa_info *__devinit
-sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat)
+static struct sa_info *sa1100_setup_mtd(struct platform_device *pdev,
+ struct flash_platform_data *plat)
{
struct sa_info *info;
int nr, size, i, ret = 0;
@@ -246,7 +246,7 @@
static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
-static int __devinit sa1100_mtd_probe(struct platform_device *pdev)
+static int sa1100_mtd_probe(struct platform_device *pdev)
{
struct flash_platform_data *plat = pdev->dev.platform_data;
struct sa_info *info;
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c
index 9dcbc684..71796137 100644
--- a/drivers/mtd/maps/scb2_flash.c
+++ b/drivers/mtd/maps/scb2_flash.c
@@ -69,7 +69,7 @@
};
static int region_fail;
-static int __devinit
+static int
scb2_fixup_mtd(struct mtd_info *mtd)
{
int i;
@@ -133,7 +133,7 @@
/* CSB5's 'Function Control Register' has bits for decoding @ >= 0xffc00000 */
#define CSB5_FCR 0x41
#define CSB5_FCR_DECODE_ALL 0x0e
-static int __devinit
+static int
scb2_flash_probe(struct pci_dev *dev, const struct pci_device_id *ent)
{
u8 reg;
@@ -197,7 +197,7 @@
return 0;
}
-static void __devexit
+static void
scb2_flash_remove(struct pci_dev *dev)
{
if (!scb2_mtd)
@@ -231,7 +231,7 @@
.name = "Intel SCB2 BIOS Flash",
.id_table = scb2_flash_pci_ids,
.probe = scb2_flash_probe,
- .remove = __devexit_p(scb2_flash_remove),
+ .remove = scb2_flash_remove,
};
module_pci_driver(scb2_flash_driver);
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
index 175e537..d467f3b 100644
--- a/drivers/mtd/maps/sun_uflash.c
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -108,7 +108,7 @@
return 0;
}
-static int __devinit uflash_probe(struct platform_device *op)
+static int uflash_probe(struct platform_device *op)
{
struct device_node *dp = op->dev.of_node;
@@ -121,7 +121,7 @@
return uflash_devinit(op, dp);
}
-static int __devexit uflash_remove(struct platform_device *op)
+static int uflash_remove(struct platform_device *op)
{
struct uflash_dev *up = dev_get_drvdata(&op->dev);
@@ -155,7 +155,7 @@
.of_match_table = uflash_match,
},
.probe = uflash_probe,
- .remove = __devexit_p(uflash_remove),
+ .remove = uflash_remove,
};
module_platform_driver(uflash_driver);
diff --git a/drivers/mtd/maps/vmu-flash.c b/drivers/mtd/maps/vmu-flash.c
index 2e2b094..6b223cf 100644
--- a/drivers/mtd/maps/vmu-flash.c
+++ b/drivers/mtd/maps/vmu-flash.c
@@ -596,7 +596,7 @@
}
/* Handles very basic info about the flash, queries for details */
-static int __devinit vmu_connect(struct maple_device *mdev)
+static int vmu_connect(struct maple_device *mdev)
{
unsigned long test_flash_data, basic_flash_data;
int c, error;
@@ -690,7 +690,7 @@
return error;
}
-static void __devexit vmu_disconnect(struct maple_device *mdev)
+static void vmu_disconnect(struct maple_device *mdev)
{
struct memcard *card;
struct mdev_part *mpart;
@@ -772,7 +772,7 @@
}
-static int __devinit probe_maple_vmu(struct device *dev)
+static int probe_maple_vmu(struct device *dev)
{
int error;
struct maple_device *mdev = to_maple_dev(dev);
@@ -789,7 +789,7 @@
return 0;
}
-static int __devexit remove_maple_vmu(struct device *dev)
+static int remove_maple_vmu(struct device *dev)
{
struct maple_device *mdev = to_maple_dev(dev);
@@ -802,7 +802,7 @@
.drv = {
.name = "Dreamcast_visual_memory",
.probe = probe_maple_vmu,
- .remove = __devexit_p(remove_maple_vmu),
+ .remove = remove_maple_vmu,
},
};
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index f1f0671..5ad39bb 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -32,7 +32,6 @@
#include <linux/hdreg.h>
#include <linux/init.h>
#include <linux/mutex.h>
-#include <linux/kthread.h>
#include <asm/uaccess.h>
#include "mtdcore.h"
@@ -121,16 +120,14 @@
int mtd_blktrans_cease_background(struct mtd_blktrans_dev *dev)
{
- if (kthread_should_stop())
- return 1;
-
return dev->bg_stop;
}
EXPORT_SYMBOL_GPL(mtd_blktrans_cease_background);
-static int mtd_blktrans_thread(void *arg)
+static void mtd_blktrans_work(struct work_struct *work)
{
- struct mtd_blktrans_dev *dev = arg;
+ struct mtd_blktrans_dev *dev =
+ container_of(work, struct mtd_blktrans_dev, work);
struct mtd_blktrans_ops *tr = dev->tr;
struct request_queue *rq = dev->rq;
struct request *req = NULL;
@@ -138,7 +135,7 @@
spin_lock_irq(rq->queue_lock);
- while (!kthread_should_stop()) {
+ while (1) {
int res;
dev->bg_stop = false;
@@ -156,15 +153,7 @@
background_done = !dev->bg_stop;
continue;
}
- set_current_state(TASK_INTERRUPTIBLE);
-
- if (kthread_should_stop())
- set_current_state(TASK_RUNNING);
-
- spin_unlock_irq(rq->queue_lock);
- schedule();
- spin_lock_irq(rq->queue_lock);
- continue;
+ break;
}
spin_unlock_irq(rq->queue_lock);
@@ -185,8 +174,6 @@
__blk_end_request_all(req, -EIO);
spin_unlock_irq(rq->queue_lock);
-
- return 0;
}
static void mtd_blktrans_request(struct request_queue *rq)
@@ -199,10 +186,8 @@
if (!dev)
while ((req = blk_fetch_request(rq)) != NULL)
__blk_end_request_all(req, -ENODEV);
- else {
- dev->bg_stop = true;
- wake_up_process(dev->thread);
- }
+ else
+ queue_work(dev->wq, &dev->work);
}
static int blktrans_open(struct block_device *bdev, fmode_t mode)
@@ -325,7 +310,7 @@
return ret;
}
-static const struct block_device_operations mtd_blktrans_ops = {
+static const struct block_device_operations mtd_block_ops = {
.owner = THIS_MODULE,
.open = blktrans_open,
.release = blktrans_release,
@@ -401,7 +386,7 @@
gd->private_data = new;
gd->major = tr->major;
gd->first_minor = (new->devnum) << tr->part_bits;
- gd->fops = &mtd_blktrans_ops;
+ gd->fops = &mtd_block_ops;
if (tr->part_bits)
if (new->devnum < 26)
@@ -437,14 +422,13 @@
gd->queue = new->rq;
- /* Create processing thread */
- /* TODO: workqueue ? */
- new->thread = kthread_run(mtd_blktrans_thread, new,
- "%s%d", tr->name, new->mtd->index);
- if (IS_ERR(new->thread)) {
- ret = PTR_ERR(new->thread);
+ /* Create processing workqueue */
+ new->wq = alloc_workqueue("%s%d", 0, 0,
+ tr->name, new->mtd->index);
+ if (!new->wq)
goto error4;
- }
+ INIT_WORK(&new->work, mtd_blktrans_work);
+
gd->driverfs_dev = &new->mtd->dev;
if (new->readonly)
@@ -484,9 +468,8 @@
/* Stop new requests to arrive */
del_gendisk(old->disk);
-
- /* Stop the thread */
- kthread_stop(old->thread);
+ /* Stop workqueue. This will perform any pending request. */
+ destroy_workqueue(old->wq);
/* Kill current requests */
spin_lock_irqsave(&old->queue_lock, flags);
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index f5b3f91..97bb8f6 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -271,7 +271,7 @@
if (count[0] == 0xffffffff && count[1] == 0xffffffff)
mark_page_unused(cxt, page);
- if (count[0] == 0xffffffff)
+ if (count[0] == 0xffffffff || count[1] != MTDOOPS_KERNMSG_MAGIC)
continue;
if (maxcount == 0xffffffff) {
maxcount = count[0];
@@ -289,14 +289,13 @@
}
}
if (maxcount == 0xffffffff) {
- cxt->nextpage = 0;
- cxt->nextcount = 1;
- schedule_work(&cxt->work_erase);
- return;
+ cxt->nextpage = cxt->oops_pages - 1;
+ cxt->nextcount = 0;
}
-
- cxt->nextpage = maxpos;
- cxt->nextcount = maxcount;
+ else {
+ cxt->nextpage = maxpos;
+ cxt->nextcount = maxcount;
+ }
mtdoops_inc_counter(cxt);
}
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index dae191b..5819eb5 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -50,16 +50,30 @@
of these chips were reused by later, larger chips.
config MTD_NAND_DENALI
- depends on PCI
+ tristate "Support Denali NAND controller"
+ help
+ Enable support for the Denali NAND controller. This should be
+ combined with either the PCI or platform drivers to provide device
+ registration.
+
+config MTD_NAND_DENALI_PCI
tristate "Support Denali NAND controller on Intel Moorestown"
+ depends on PCI && MTD_NAND_DENALI
help
Enable the driver for NAND flash on Intel Moorestown, using the
Denali NAND controller core.
-
+
+config MTD_NAND_DENALI_DT
+ tristate "Support Denali NAND controller as a DT device"
+ depends on HAVE_CLK && MTD_NAND_DENALI
+ help
+ Enable the driver for NAND flash on platforms using a Denali NAND
+ controller as a DT device.
+
config MTD_NAND_DENALI_SCRATCH_REG_ADDR
hex "Denali NAND size scratch register address"
default "0xFF108018"
- depends on MTD_NAND_DENALI
+ depends on MTD_NAND_DENALI_PCI
help
Some platforms place the NAND chip size in a scratch register
because (some versions of) the driver aren't able to automatically
@@ -433,6 +447,14 @@
block, such as SD card. So pay attention to it when you enable
the GPMI.
+config MTD_NAND_BCM47XXNFLASH
+ tristate "Support for NAND flash on BCM4706 BCMA bus"
+ depends on BCMA_NFLASH
+ help
+ BCMA bus can have various flash memories attached, they are
+ registered by bcma as platform devices. This enables driver for
+ NAND flash memories. For now only BCM4706 is supported.
+
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
depends on HAS_IOMEM
@@ -499,12 +521,6 @@
This enables the driver for the NAND flash controller on the
MXC processors.
-config MTD_NAND_NOMADIK
- tristate "ST Nomadik 8815 NAND support"
- depends on ARCH_NOMADIK
- help
- Driver for the NAND flash controller on the Nomadik, with ECC.
-
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
depends on SUPERH || ARCH_SHMOBILE
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 6c7f2b3..d76d912 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -11,6 +11,8 @@
obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
+obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o
+obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
@@ -45,11 +47,11 @@
obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o
-obj-$(CONFIG_MTD_NAND_NOMADIK) += nomadik_nand.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
+obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 9e7723a..f1d71cd 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -173,7 +173,7 @@
/*
* Main initialization routine
*/
-static int __devinit ams_delta_init(struct platform_device *pdev)
+static int ams_delta_init(struct platform_device *pdev)
{
struct nand_chip *this;
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -270,7 +270,7 @@
/*
* Clean up routine
*/
-static int __devexit ams_delta_cleanup(struct platform_device *pdev)
+static int ams_delta_cleanup(struct platform_device *pdev)
{
void __iomem *io_base = platform_get_drvdata(pdev);
@@ -289,7 +289,7 @@
static struct platform_driver ams_delta_nand_driver = {
.probe = ams_delta_init,
- .remove = __devexit_p(ams_delta_cleanup),
+ .remove = ams_delta_cleanup,
.driver = {
.name = "ams-delta-nand",
.owner = THIS_MODULE,
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 92623ac..90bdca6 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -331,13 +331,13 @@
* 12-bits 20-bytes 21-bytes
* 24-bits 39-bytes 42-bytes
*/
-static int __devinit pmecc_get_ecc_bytes(int cap, int sector_size)
+static int pmecc_get_ecc_bytes(int cap, int sector_size)
{
int m = 12 + sector_size / 512;
return (m * cap + 7) / 8;
}
-static void __devinit pmecc_config_ecc_layout(struct nand_ecclayout *layout,
+static void pmecc_config_ecc_layout(struct nand_ecclayout *layout,
int oobsize, int ecc_len)
{
int i;
@@ -353,7 +353,7 @@
oobsize - ecc_len - layout->oobfree[0].offset;
}
-static void __devinit __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host)
+static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host)
{
int table_size;
@@ -375,7 +375,7 @@
kfree(host->pmecc_delta);
}
-static int __devinit pmecc_data_alloc(struct atmel_nand_host *host)
+static int pmecc_data_alloc(struct atmel_nand_host *host)
{
const int cap = host->pmecc_corr_cap;
@@ -724,6 +724,7 @@
struct atmel_nand_host *host = nand_chip->priv;
int i, err_nbr, eccbytes;
uint8_t *buf_pos;
+ int total_err = 0;
eccbytes = nand_chip->ecc.bytes;
for (i = 0; i < eccbytes; i++)
@@ -751,12 +752,13 @@
pmecc_correct_data(mtd, buf_pos, ecc, i,
host->pmecc_bytes_per_sector, err_nbr);
mtd->ecc_stats.corrected += err_nbr;
+ total_err += err_nbr;
}
}
pmecc_stat >>= 1;
}
- return 0;
+ return total_err;
}
static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
@@ -768,6 +770,7 @@
uint32_t *eccpos = chip->ecc.layout->eccpos;
uint32_t stat;
unsigned long end_time;
+ int bitflips = 0;
pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
@@ -790,11 +793,14 @@
}
stat = pmecc_readl_relaxed(host->ecc, ISR);
- if (stat != 0)
- if (pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]) != 0)
- return -EIO;
+ if (stat != 0) {
+ bitflips = pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]);
+ if (bitflips < 0)
+ /* uncorrectable errors */
+ return 0;
+ }
- return 0;
+ return bitflips;
}
static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
@@ -1206,7 +1212,7 @@
}
#if defined(CONFIG_OF)
-static int __devinit atmel_of_init_port(struct atmel_nand_host *host,
+static int atmel_of_init_port(struct atmel_nand_host *host,
struct device_node *np)
{
u32 val, table_offset;
@@ -1293,7 +1299,7 @@
return 0;
}
#else
-static int __devinit atmel_of_init_port(struct atmel_nand_host *host,
+static int atmel_of_init_port(struct atmel_nand_host *host,
struct device_node *np)
{
return -EINVAL;
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 5c47b20..217459d 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -382,7 +382,7 @@
while(!this->dev_ready(mtd));
}
-static int __devinit find_nand_cs(unsigned long nand_base)
+static int find_nand_cs(unsigned long nand_base)
{
void __iomem *base =
(void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR);
@@ -403,7 +403,7 @@
return -ENODEV;
}
-static int __devinit au1550nd_probe(struct platform_device *pdev)
+static int au1550nd_probe(struct platform_device *pdev)
{
struct au1550nd_platdata *pd;
struct au1550nd_ctx *ctx;
@@ -491,7 +491,7 @@
return ret;
}
-static int __devexit au1550nd_remove(struct platform_device *pdev)
+static int au1550nd_remove(struct platform_device *pdev)
{
struct au1550nd_ctx *ctx = platform_get_drvdata(pdev);
struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -509,7 +509,7 @@
.owner = THIS_MODULE,
},
.probe = au1550nd_probe,
- .remove = __devexit_p(au1550nd_remove),
+ .remove = au1550nd_remove,
};
module_platform_driver(au1550nd_driver);
diff --git a/drivers/mtd/nand/bcm47xxnflash/Makefile b/drivers/mtd/nand/bcm47xxnflash/Makefile
new file mode 100644
index 0000000..f05b119
--- /dev/null
+++ b/drivers/mtd/nand/bcm47xxnflash/Makefile
@@ -0,0 +1,4 @@
+bcm47xxnflash-y += main.o
+bcm47xxnflash-y += ops_bcm4706.o
+
+obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash.o
diff --git a/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h
new file mode 100644
index 0000000..0bdb2ce
--- /dev/null
+++ b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h
@@ -0,0 +1,22 @@
+#ifndef __BCM47XXNFLASH_H
+#define __BCM47XXNFLASH_H
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+
+struct bcm47xxnflash {
+ struct bcma_drv_cc *cc;
+
+ struct nand_chip nand_chip;
+ struct mtd_info mtd;
+
+ unsigned curr_command;
+ int curr_page_addr;
+ int curr_column;
+
+ u8 id_data[8];
+};
+
+int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n);
+
+#endif /* BCM47XXNFLASH */
diff --git a/drivers/mtd/nand/bcm47xxnflash/main.c b/drivers/mtd/nand/bcm47xxnflash/main.c
new file mode 100644
index 0000000..2b8b05b
--- /dev/null
+++ b/drivers/mtd/nand/bcm47xxnflash/main.c
@@ -0,0 +1,108 @@
+/*
+ * BCM47XX NAND flash driver
+ *
+ * Copyright (C) 2012 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/bcma/bcma.h>
+
+#include "bcm47xxnflash.h"
+
+MODULE_DESCRIPTION("NAND flash driver for BCMA bus");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Rafał Miłecki");
+
+static const char *probes[] = { "bcm47xxpart", NULL };
+
+static int bcm47xxnflash_probe(struct platform_device *pdev)
+{
+ struct bcma_nflash *nflash = dev_get_platdata(&pdev->dev);
+ struct bcm47xxnflash *b47n;
+ int err = 0;
+
+ b47n = kzalloc(sizeof(*b47n), GFP_KERNEL);
+ if (!b47n) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ b47n->nand_chip.priv = b47n;
+ b47n->mtd.owner = THIS_MODULE;
+ b47n->mtd.priv = &b47n->nand_chip; /* Required */
+ b47n->cc = container_of(nflash, struct bcma_drv_cc, nflash);
+
+ if (b47n->cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
+ err = bcm47xxnflash_ops_bcm4706_init(b47n);
+ } else {
+ pr_err("Device not supported\n");
+ err = -ENOTSUPP;
+ }
+ if (err) {
+ pr_err("Initialization failed: %d\n", err);
+ goto err_init;
+ }
+
+ err = mtd_device_parse_register(&b47n->mtd, probes, NULL, NULL, 0);
+ if (err) {
+ pr_err("Failed to register MTD device: %d\n", err);
+ goto err_dev_reg;
+ }
+
+ return 0;
+
+err_dev_reg:
+err_init:
+ kfree(b47n);
+out:
+ return err;
+}
+
+static int __devexit bcm47xxnflash_remove(struct platform_device *pdev)
+{
+ struct bcma_nflash *nflash = dev_get_platdata(&pdev->dev);
+
+ if (nflash->mtd)
+ mtd_device_unregister(nflash->mtd);
+
+ return 0;
+}
+
+static struct platform_driver bcm47xxnflash_driver = {
+ .remove = __devexit_p(bcm47xxnflash_remove),
+ .driver = {
+ .name = "bcma_nflash",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init bcm47xxnflash_init(void)
+{
+ int err;
+
+ /*
+ * Platform device "bcma_nflash" exists on SoCs and is registered very
+ * early, it won't be added during runtime (use platform_driver_probe).
+ */
+ err = platform_driver_probe(&bcm47xxnflash_driver, bcm47xxnflash_probe);
+ if (err)
+ pr_err("Failed to register serial flash driver: %d\n", err);
+
+ return err;
+}
+
+static void __exit bcm47xxnflash_exit(void)
+{
+ platform_driver_unregister(&bcm47xxnflash_driver);
+}
+
+module_init(bcm47xxnflash_init);
+module_exit(bcm47xxnflash_exit);
diff --git a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
new file mode 100644
index 0000000..86c9a79
--- /dev/null
+++ b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
@@ -0,0 +1,413 @@
+/*
+ * BCM47XX NAND flash driver
+ *
+ * Copyright (C) 2012 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/bcma/bcma.h>
+
+#include "bcm47xxnflash.h"
+
+/* Broadcom uses 1'000'000 but it seems to be too many. Tests on WNDR4500 has
+ * shown 164 retries as maxiumum. */
+#define NFLASH_READY_RETRIES 1000
+
+#define NFLASH_SECTOR_SIZE 512
+
+#define NCTL_CMD0 0x00010000
+#define NCTL_CMD1W 0x00080000
+#define NCTL_READ 0x00100000
+#define NCTL_WRITE 0x00200000
+#define NCTL_SPECADDR 0x01000000
+#define NCTL_READY 0x04000000
+#define NCTL_ERR 0x08000000
+#define NCTL_CSA 0x40000000
+#define NCTL_START 0x80000000
+
+/**************************************************
+ * Various helpers
+ **************************************************/
+
+static inline u8 bcm47xxnflash_ops_bcm4706_ns_to_cycle(u16 ns, u16 clock)
+{
+ return ((ns * 1000 * clock) / 1000000) + 1;
+}
+
+static int bcm47xxnflash_ops_bcm4706_ctl_cmd(struct bcma_drv_cc *cc, u32 code)
+{
+ int i = 0;
+
+ bcma_cc_write32(cc, BCMA_CC_NFLASH_CTL, NCTL_START | code);
+ for (i = 0; i < NFLASH_READY_RETRIES; i++) {
+ if (!(bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) & NCTL_START)) {
+ i = 0;
+ break;
+ }
+ }
+ if (i) {
+ pr_err("NFLASH control command not ready!\n");
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static int bcm47xxnflash_ops_bcm4706_poll(struct bcma_drv_cc *cc)
+{
+ int i;
+
+ for (i = 0; i < NFLASH_READY_RETRIES; i++) {
+ if (bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) & NCTL_READY) {
+ if (bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) &
+ BCMA_CC_NFLASH_CTL_ERR) {
+ pr_err("Error on polling\n");
+ return -EBUSY;
+ } else {
+ return 0;
+ }
+ }
+ }
+
+ pr_err("Polling timeout!\n");
+ return -EBUSY;
+}
+
+/**************************************************
+ * R/W
+ **************************************************/
+
+static void bcm47xxnflash_ops_bcm4706_read(struct mtd_info *mtd, uint8_t *buf,
+ int len)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+
+ u32 ctlcode;
+ u32 *dest = (u32 *)buf;
+ int i;
+ int toread;
+
+ BUG_ON(b47n->curr_page_addr & ~nand_chip->pagemask);
+ /* Don't validate column using nand_chip->page_shift, it may be bigger
+ * when accessing OOB */
+
+ while (len) {
+ /* We can read maximum of 0x200 bytes at once */
+ toread = min(len, 0x200);
+
+ /* Set page and column */
+ bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_COL_ADDR,
+ b47n->curr_column);
+ bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_ROW_ADDR,
+ b47n->curr_page_addr);
+
+ /* Prepare to read */
+ ctlcode = NCTL_CSA | NCTL_CMD1W | 0x00040000 | 0x00020000 |
+ NCTL_CMD0;
+ ctlcode |= NAND_CMD_READSTART << 8;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, ctlcode))
+ return;
+ if (bcm47xxnflash_ops_bcm4706_poll(b47n->cc))
+ return;
+
+ /* Eventually read some data :) */
+ for (i = 0; i < toread; i += 4, dest++) {
+ ctlcode = NCTL_CSA | 0x30000000 | NCTL_READ;
+ if (i == toread - 4) /* Last read goes without that */
+ ctlcode &= ~NCTL_CSA;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc,
+ ctlcode))
+ return;
+ *dest = bcma_cc_read32(b47n->cc, BCMA_CC_NFLASH_DATA);
+ }
+
+ b47n->curr_column += toread;
+ len -= toread;
+ }
+}
+
+static void bcm47xxnflash_ops_bcm4706_write(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+ struct bcma_drv_cc *cc = b47n->cc;
+
+ u32 ctlcode;
+ const u32 *data = (u32 *)buf;
+ int i;
+
+ BUG_ON(b47n->curr_page_addr & ~nand_chip->pagemask);
+ /* Don't validate column using nand_chip->page_shift, it may be bigger
+ * when accessing OOB */
+
+ for (i = 0; i < len; i += 4, data++) {
+ bcma_cc_write32(cc, BCMA_CC_NFLASH_DATA, *data);
+
+ ctlcode = NCTL_CSA | 0x30000000 | NCTL_WRITE;
+ if (i == len - 4) /* Last read goes without that */
+ ctlcode &= ~NCTL_CSA;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode)) {
+ pr_err("%s ctl_cmd didn't work!\n", __func__);
+ return;
+ }
+ }
+
+ b47n->curr_column += len;
+}
+
+/**************************************************
+ * NAND chip ops
+ **************************************************/
+
+/* Default nand_select_chip calls cmd_ctrl, which is not used in BCM4706 */
+static void bcm47xxnflash_ops_bcm4706_select_chip(struct mtd_info *mtd,
+ int chip)
+{
+ return;
+}
+
+/*
+ * Default nand_command and nand_command_lp don't match BCM4706 hardware layout.
+ * For example, reading chip id is performed in a non-standard way.
+ * Setting column and page is also handled differently, we use a special
+ * registers of ChipCommon core. Hacking cmd_ctrl to understand and convert
+ * standard commands would be much more complicated.
+ */
+static void bcm47xxnflash_ops_bcm4706_cmdfunc(struct mtd_info *mtd,
+ unsigned command, int column,
+ int page_addr)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+ struct bcma_drv_cc *cc = b47n->cc;
+ u32 ctlcode;
+ int i;
+
+ if (column != -1)
+ b47n->curr_column = column;
+ if (page_addr != -1)
+ b47n->curr_page_addr = page_addr;
+
+ switch (command) {
+ case NAND_CMD_RESET:
+ pr_warn("Chip reset not implemented yet\n");
+ break;
+ case NAND_CMD_READID:
+ ctlcode = NCTL_CSA | 0x01000000 | NCTL_CMD1W | NCTL_CMD0;
+ ctlcode |= NAND_CMD_READID;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, ctlcode)) {
+ pr_err("READID error\n");
+ break;
+ }
+
+ /*
+ * Reading is specific, last one has to go without NCTL_CSA
+ * bit. We don't know how many reads NAND subsystem is going
+ * to perform, so cache everything.
+ */
+ for (i = 0; i < ARRAY_SIZE(b47n->id_data); i++) {
+ ctlcode = NCTL_CSA | NCTL_READ;
+ if (i == ARRAY_SIZE(b47n->id_data) - 1)
+ ctlcode &= ~NCTL_CSA;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc,
+ ctlcode)) {
+ pr_err("READID error\n");
+ break;
+ }
+ b47n->id_data[i] =
+ bcma_cc_read32(b47n->cc, BCMA_CC_NFLASH_DATA)
+ & 0xFF;
+ }
+
+ break;
+ case NAND_CMD_STATUS:
+ ctlcode = NCTL_CSA | NCTL_CMD0 | NAND_CMD_STATUS;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode))
+ pr_err("STATUS command error\n");
+ break;
+ case NAND_CMD_READ0:
+ break;
+ case NAND_CMD_READOOB:
+ if (page_addr != -1)
+ b47n->curr_column += mtd->writesize;
+ break;
+ case NAND_CMD_ERASE1:
+ bcma_cc_write32(cc, BCMA_CC_NFLASH_ROW_ADDR,
+ b47n->curr_page_addr);
+ ctlcode = 0x00040000 | NCTL_CMD1W | NCTL_CMD0 |
+ NAND_CMD_ERASE1 | (NAND_CMD_ERASE2 << 8);
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode))
+ pr_err("ERASE1 failed\n");
+ break;
+ case NAND_CMD_ERASE2:
+ break;
+ case NAND_CMD_SEQIN:
+ /* Set page and column */
+ bcma_cc_write32(cc, BCMA_CC_NFLASH_COL_ADDR,
+ b47n->curr_column);
+ bcma_cc_write32(cc, BCMA_CC_NFLASH_ROW_ADDR,
+ b47n->curr_page_addr);
+
+ /* Prepare to write */
+ ctlcode = 0x40000000 | 0x00040000 | 0x00020000 | 0x00010000;
+ ctlcode |= NAND_CMD_SEQIN;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode))
+ pr_err("SEQIN failed\n");
+ break;
+ case NAND_CMD_PAGEPROG:
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, 0x00010000 |
+ NAND_CMD_PAGEPROG))
+ pr_err("PAGEPROG failed\n");
+ if (bcm47xxnflash_ops_bcm4706_poll(cc))
+ pr_err("PAGEPROG not ready\n");
+ break;
+ default:
+ pr_err("Command 0x%X unsupported\n", command);
+ break;
+ }
+ b47n->curr_command = command;
+}
+
+static u8 bcm47xxnflash_ops_bcm4706_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+ struct bcma_drv_cc *cc = b47n->cc;
+ u32 tmp = 0;
+
+ switch (b47n->curr_command) {
+ case NAND_CMD_READID:
+ if (b47n->curr_column >= ARRAY_SIZE(b47n->id_data)) {
+ pr_err("Requested invalid id_data: %d\n",
+ b47n->curr_column);
+ return 0;
+ }
+ return b47n->id_data[b47n->curr_column++];
+ case NAND_CMD_STATUS:
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, NCTL_READ))
+ return 0;
+ return bcma_cc_read32(cc, BCMA_CC_NFLASH_DATA) & 0xff;
+ case NAND_CMD_READOOB:
+ bcm47xxnflash_ops_bcm4706_read(mtd, (u8 *)&tmp, 4);
+ return tmp & 0xFF;
+ }
+
+ pr_err("Invalid command for byte read: 0x%X\n", b47n->curr_command);
+ return 0;
+}
+
+static void bcm47xxnflash_ops_bcm4706_read_buf(struct mtd_info *mtd,
+ uint8_t *buf, int len)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+
+ switch (b47n->curr_command) {
+ case NAND_CMD_READ0:
+ case NAND_CMD_READOOB:
+ bcm47xxnflash_ops_bcm4706_read(mtd, buf, len);
+ return;
+ }
+
+ pr_err("Invalid command for buf read: 0x%X\n", b47n->curr_command);
+}
+
+static void bcm47xxnflash_ops_bcm4706_write_buf(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+
+ switch (b47n->curr_command) {
+ case NAND_CMD_SEQIN:
+ bcm47xxnflash_ops_bcm4706_write(mtd, buf, len);
+ return;
+ }
+
+ pr_err("Invalid command for buf write: 0x%X\n", b47n->curr_command);
+}
+
+/**************************************************
+ * Init
+ **************************************************/
+
+int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
+{
+ int err;
+ u32 freq;
+ u16 clock;
+ u8 w0, w1, w2, w3, w4;
+
+ unsigned long chipsize; /* MiB */
+ u8 tbits, col_bits, col_size, row_bits, row_bsize;
+ u32 val;
+
+ b47n->nand_chip.select_chip = bcm47xxnflash_ops_bcm4706_select_chip;
+ b47n->nand_chip.cmdfunc = bcm47xxnflash_ops_bcm4706_cmdfunc;
+ b47n->nand_chip.read_byte = bcm47xxnflash_ops_bcm4706_read_byte;
+ b47n->nand_chip.read_buf = bcm47xxnflash_ops_bcm4706_read_buf;
+ b47n->nand_chip.write_buf = bcm47xxnflash_ops_bcm4706_write_buf;
+ b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;
+ b47n->nand_chip.ecc.mode = NAND_ECC_NONE; /* TODO: implement ECC */
+
+ /* Enable NAND flash access */
+ bcma_cc_set32(b47n->cc, BCMA_CC_4706_FLASHSCFG,
+ BCMA_CC_4706_FLASHSCFG_NF1);
+
+ /* Configure wait counters */
+ if (b47n->cc->status & BCMA_CC_CHIPST_4706_PKG_OPTION) {
+ freq = 100000000;
+ } else {
+ freq = bcma_chipco_pll_read(b47n->cc, 4);
+ freq = (freq * 0xFFF) >> 3;
+ freq = (freq * 25000000) >> 3;
+ }
+ clock = freq / 1000000;
+ w0 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(15, clock);
+ w1 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(20, clock);
+ w2 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(10, clock);
+ w3 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(10, clock);
+ w4 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(100, clock);
+ bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_WAITCNT0,
+ (w4 << 24 | w3 << 18 | w2 << 12 | w1 << 6 | w0));
+
+ /* Scan NAND */
+ err = nand_scan(&b47n->mtd, 1);
+ if (err) {
+ pr_err("Could not scan NAND flash: %d\n", err);
+ goto exit;
+ }
+
+ /* Configure FLASH */
+ chipsize = b47n->nand_chip.chipsize >> 20;
+ tbits = ffs(chipsize); /* find first bit set */
+ if (!tbits || tbits != fls(chipsize)) {
+ pr_err("Invalid flash size: 0x%lX\n", chipsize);
+ err = -ENOTSUPP;
+ goto exit;
+ }
+ tbits += 19; /* Broadcom increases *index* by 20, we increase *pos* */
+
+ col_bits = b47n->nand_chip.page_shift + 1;
+ col_size = (col_bits + 7) / 8;
+
+ row_bits = tbits - col_bits + 1;
+ row_bsize = (row_bits + 7) / 8;
+
+ val = ((row_bsize - 1) << 6) | ((col_size - 1) << 4) | 2;
+ bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_CONF, val);
+
+exit:
+ if (err)
+ bcma_cc_mask32(b47n->cc, BCMA_CC_4706_FLASHSCFG,
+ ~BCMA_CC_4706_FLASHSCFG_NF1);
+ return err;
+}
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index ab0caa7..4271e94 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -658,7 +658,7 @@
/*
* Device management interface
*/
-static int __devinit bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
+static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
{
struct mtd_info *mtd = &info->mtd;
struct mtd_partition *parts = info->platform->partitions;
@@ -667,7 +667,7 @@
return mtd_device_register(mtd, parts, nr);
}
-static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
+static int bf5xx_nand_remove(struct platform_device *pdev)
{
struct bf5xx_nand_info *info = to_nand_info(pdev);
@@ -725,7 +725,7 @@
* it can allocate all necessary resources then calls the
* nand layer to look for devices
*/
-static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
+static int bf5xx_nand_probe(struct platform_device *pdev)
{
struct bf5xx_nand_platform *plat = to_nand_plat(pdev);
struct bf5xx_nand_info *info = NULL;
@@ -865,7 +865,7 @@
/* driver device registration */
static struct platform_driver bf5xx_nand_driver = {
.probe = bf5xx_nand_probe,
- .remove = __devexit_p(bf5xx_nand_remove),
+ .remove = bf5xx_nand_remove,
.suspend = bf5xx_nand_suspend,
.resume = bf5xx_nand_resume,
.driver = {
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 2bb7170..010d612 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -585,7 +585,7 @@
}
/* F_2[X]/(X**6+X+1) */
-static unsigned short __devinit gf64_mul(u8 a, u8 b)
+static unsigned short gf64_mul(u8 a, u8 b)
{
u8 c;
unsigned int i;
@@ -604,7 +604,7 @@
}
/* F_64[X]/(X**2+X+A**-1) with A the generator of F_64[X] */
-static u16 __devinit gf4096_mul(u16 a, u16 b)
+static u16 gf4096_mul(u16 a, u16 b)
{
u8 ah, al, bh, bl, ch, cl;
@@ -619,14 +619,14 @@
return (ch << 6) ^ cl;
}
-static int __devinit cafe_mul(int x)
+static int cafe_mul(int x)
{
if (x == 0)
return 1;
return gf4096_mul(x, 0xe01);
}
-static int __devinit cafe_nand_probe(struct pci_dev *pdev,
+static int cafe_nand_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct mtd_info *mtd;
@@ -821,7 +821,7 @@
return err;
}
-static void __devexit cafe_nand_remove(struct pci_dev *pdev)
+static void cafe_nand_remove(struct pci_dev *pdev)
{
struct mtd_info *mtd = pci_get_drvdata(pdev);
struct cafe_priv *cafe = mtd->priv;
@@ -887,7 +887,7 @@
.name = "CAFÉ NAND",
.id_table = cafe_nand_tbl,
.probe = cafe_nand_probe,
- .remove = __devexit_p(cafe_nand_remove),
+ .remove = cafe_nand_remove,
.resume = cafe_nand_resume,
};
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index adb6c3e..2cdeab8 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -237,6 +237,7 @@
this->ecc.hwctl = cs_enable_hwecc;
this->ecc.calculate = cs_calculate_ecc;
this->ecc.correct = nand_correct_data;
+ this->ecc.strength = 1;
/* Enable the following for a flash based bad block table */
this->bbt_options = NAND_BBT_USE_FLASH;
@@ -247,8 +248,6 @@
goto out_ior;
}
- this->ecc.strength = 1;
-
new_mtd->name = kasprintf(GFP_KERNEL, "cs553x_nand_cs%d", cs);
cs553x_mtd[cs] = new_mtd;
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 945047a..3502606 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -821,9 +821,16 @@
if (ret < 0)
goto err_scan;
- ret = mtd_device_parse_register(&info->mtd, NULL, NULL, pdata->parts,
- pdata->nr_parts);
+ if (pdata->parts)
+ ret = mtd_device_parse_register(&info->mtd, NULL, NULL,
+ pdata->parts, pdata->nr_parts);
+ else {
+ struct mtd_part_parser_data ppdata;
+ ppdata.of_node = pdev->dev.of_node;
+ ret = mtd_device_parse_register(&info->mtd, NULL, &ppdata,
+ NULL, 0);
+ }
if (ret < 0)
goto err_scan;
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index e706a23..0c8bb6b 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -16,14 +16,12 @@
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
*/
-
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/wait.h>
#include <linux/mutex.h>
#include <linux/slab.h>
-#include <linux/pci.h>
#include <linux/mtd/mtd.h>
#include <linux/module.h>
@@ -89,13 +87,6 @@
* format the bank into the proper bits for the controller */
#define BANK(x) ((x) << 24)
-/* List of platforms this NAND controller has be integrated into */
-static const struct pci_device_id denali_pci_ids[] = {
- { PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
- { PCI_VDEVICE(INTEL, 0x0809), INTEL_MRST },
- { /* end: all zeroes */ }
-};
-
/* forward declarations */
static void clear_interrupts(struct denali_nand_info *denali);
static uint32_t wait_for_irq(struct denali_nand_info *denali,
@@ -699,7 +690,7 @@
if (comp_res == 0) {
/* timeout */
- printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n",
+ pr_err("timeout occurred, status = 0x%x, mask = 0x%x\n",
intr_status, irq_mask);
intr_status = 0;
@@ -1305,8 +1296,7 @@
/* TODO: Read OOB data */
break;
default:
- printk(KERN_ERR ": unsupported command"
- " received 0x%x\n", cmd);
+ pr_err(": unsupported command received 0x%x\n", cmd);
break;
}
}
@@ -1425,107 +1415,48 @@
denali->irq_status = 0;
}
-/* driver entry point */
-static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+int denali_init(struct denali_nand_info *denali)
{
- int ret = -ENODEV;
- resource_size_t csr_base, mem_base;
- unsigned long csr_len, mem_len;
- struct denali_nand_info *denali;
+ int ret;
- denali = kzalloc(sizeof(*denali), GFP_KERNEL);
- if (!denali)
- return -ENOMEM;
-
- ret = pci_enable_device(dev);
- if (ret) {
- printk(KERN_ERR "Spectra: pci_enable_device failed.\n");
- goto failed_alloc_memery;
- }
-
- if (id->driver_data == INTEL_CE4100) {
+ if (denali->platform == INTEL_CE4100) {
/* Due to a silicon limitation, we can only support
* ONFI timing mode 1 and below.
*/
if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
- printk(KERN_ERR "Intel CE4100 only supports"
- " ONFI timing mode 1 or below\n");
- ret = -EINVAL;
- goto failed_enable_dev;
- }
- denali->platform = INTEL_CE4100;
- mem_base = pci_resource_start(dev, 0);
- mem_len = pci_resource_len(dev, 1);
- csr_base = pci_resource_start(dev, 1);
- csr_len = pci_resource_len(dev, 1);
- } else {
- denali->platform = INTEL_MRST;
- csr_base = pci_resource_start(dev, 0);
- csr_len = pci_resource_len(dev, 0);
- mem_base = pci_resource_start(dev, 1);
- mem_len = pci_resource_len(dev, 1);
- if (!mem_len) {
- mem_base = csr_base + csr_len;
- mem_len = csr_len;
+ pr_err("Intel CE4100 only supports ONFI timing mode 1 or below\n");
+ return -EINVAL;
}
}
/* Is 32-bit DMA supported? */
- ret = dma_set_mask(&dev->dev, DMA_BIT_MASK(32));
+ ret = dma_set_mask(denali->dev, DMA_BIT_MASK(32));
if (ret) {
- printk(KERN_ERR "Spectra: no usable DMA configuration\n");
- goto failed_enable_dev;
+ pr_err("Spectra: no usable DMA configuration\n");
+ return ret;
}
- denali->buf.dma_buf = dma_map_single(&dev->dev, denali->buf.buf,
+ denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf,
DENALI_BUF_SIZE,
DMA_BIDIRECTIONAL);
- if (dma_mapping_error(&dev->dev, denali->buf.dma_buf)) {
- dev_err(&dev->dev, "Spectra: failed to map DMA buffer\n");
- goto failed_enable_dev;
+ if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) {
+ dev_err(denali->dev, "Spectra: failed to map DMA buffer\n");
+ return -EIO;
}
-
- pci_set_master(dev);
- denali->dev = &dev->dev;
- denali->mtd.dev.parent = &dev->dev;
-
- ret = pci_request_regions(dev, DENALI_NAND_NAME);
- if (ret) {
- printk(KERN_ERR "Spectra: Unable to request memory regions\n");
- goto failed_dma_map;
- }
-
- denali->flash_reg = ioremap_nocache(csr_base, csr_len);
- if (!denali->flash_reg) {
- printk(KERN_ERR "Spectra: Unable to remap memory region\n");
- ret = -ENOMEM;
- goto failed_req_regions;
- }
-
- denali->flash_mem = ioremap_nocache(mem_base, mem_len);
- if (!denali->flash_mem) {
- printk(KERN_ERR "Spectra: ioremap_nocache failed!");
- ret = -ENOMEM;
- goto failed_remap_reg;
- }
-
+ denali->mtd.dev.parent = denali->dev;
denali_hw_init(denali);
denali_drv_init(denali);
/* denali_isr register is done after all the hardware
* initilization is finished*/
- if (request_irq(dev->irq, denali_isr, IRQF_SHARED,
+ if (request_irq(denali->irq, denali_isr, IRQF_SHARED,
DENALI_NAND_NAME, denali)) {
- printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
- ret = -ENODEV;
- goto failed_remap_mem;
+ pr_err("Spectra: Unable to allocate IRQ\n");
+ return -ENODEV;
}
/* now that our ISR is registered, we can enable interrupts */
denali_set_intr_modes(denali, true);
-
- pci_set_drvdata(dev, denali);
-
denali->mtd.name = "denali-nand";
denali->mtd.owner = THIS_MODULE;
denali->mtd.priv = &denali->nand;
@@ -1549,8 +1480,7 @@
*/
if (denali->mtd.writesize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) {
ret = -ENODEV;
- printk(KERN_ERR "Spectra: device size not supported by this "
- "version of MTD.");
+ pr_err("Spectra: device size not supported by this version of MTD.");
goto failed_req_irq;
}
@@ -1602,8 +1532,8 @@
} else if (denali->mtd.oobsize < (denali->bbtskipbytes +
ECC_8BITS * (denali->mtd.writesize /
ECC_SECTOR_SIZE))) {
- printk(KERN_ERR "Your NAND chip OOB is not large enough to"
- " contain 8bit ECC correction codes");
+ pr_err("Your NAND chip OOB is not large enough to \
+ contain 8bit ECC correction codes");
goto failed_req_irq;
} else {
denali->nand.ecc.strength = 8;
@@ -1655,56 +1585,24 @@
ret = mtd_device_register(&denali->mtd, NULL, 0);
if (ret) {
- dev_err(&dev->dev, "Spectra: Failed to register MTD: %d\n",
+ dev_err(denali->dev, "Spectra: Failed to register MTD: %d\n",
ret);
goto failed_req_irq;
}
return 0;
failed_req_irq:
- denali_irq_cleanup(dev->irq, denali);
-failed_remap_mem:
- iounmap(denali->flash_mem);
-failed_remap_reg:
- iounmap(denali->flash_reg);
-failed_req_regions:
- pci_release_regions(dev);
-failed_dma_map:
- dma_unmap_single(&dev->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
- DMA_BIDIRECTIONAL);
-failed_enable_dev:
- pci_disable_device(dev);
-failed_alloc_memery:
- kfree(denali);
+ denali_irq_cleanup(denali->irq, denali);
+
return ret;
}
+EXPORT_SYMBOL(denali_init);
/* driver exit point */
-static void denali_pci_remove(struct pci_dev *dev)
+void denali_remove(struct denali_nand_info *denali)
{
- struct denali_nand_info *denali = pci_get_drvdata(dev);
-
- nand_release(&denali->mtd);
-
- denali_irq_cleanup(dev->irq, denali);
-
- iounmap(denali->flash_reg);
- iounmap(denali->flash_mem);
- pci_release_regions(dev);
- pci_disable_device(dev);
- dma_unmap_single(&dev->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
- DMA_BIDIRECTIONAL);
- pci_set_drvdata(dev, NULL);
- kfree(denali);
+ denali_irq_cleanup(denali->irq, denali);
+ dma_unmap_single(denali->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
+ DMA_BIDIRECTIONAL);
}
-
-MODULE_DEVICE_TABLE(pci, denali_pci_ids);
-
-static struct pci_driver denali_pci_driver = {
- .name = DENALI_NAND_NAME,
- .id_table = denali_pci_ids,
- .probe = denali_pci_probe,
- .remove = denali_pci_remove,
-};
-
-module_pci_driver(denali_pci_driver);
+EXPORT_SYMBOL(denali_remove);
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index fabb9d5..cec5712 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -466,6 +466,7 @@
#define INTEL_CE4100 1
#define INTEL_MRST 2
+#define DT 3
struct denali_nand_info {
struct mtd_info mtd;
@@ -487,6 +488,7 @@
uint32_t irq_status;
int irq_debug_array[32];
int idx;
+ int irq;
uint32_t devnum; /* represent how many nands connected */
uint32_t fwblks; /* represent how many blocks FW used */
@@ -496,4 +498,7 @@
uint32_t max_banks;
};
+extern int denali_init(struct denali_nand_info *denali);
+extern void denali_remove(struct denali_nand_info *denali);
+
#endif /*_LLD_NAND_*/
diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
new file mode 100644
index 0000000..546f8cb
--- /dev/null
+++ b/drivers/mtd/nand/denali_dt.c
@@ -0,0 +1,167 @@
+/*
+ * NAND Flash Controller Device Driver for DT
+ *
+ * Copyright © 2011, Picochip.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+
+#include "denali.h"
+
+struct denali_dt {
+ struct denali_nand_info denali;
+ struct clk *clk;
+};
+
+static void __iomem *request_and_map(struct device *dev,
+ const struct resource *res)
+{
+ void __iomem *ptr;
+
+ if (!devm_request_mem_region(dev, res->start, resource_size(res),
+ "denali-dt")) {
+ dev_err(dev, "unable to request %s\n", res->name);
+ return NULL;
+ }
+
+ ptr = devm_ioremap_nocache(dev, res->start, resource_size(res));
+ if (!res)
+ dev_err(dev, "ioremap_nocache of %s failed!", res->name);
+
+ return ptr;
+}
+
+static const struct of_device_id denali_nand_dt_ids[] = {
+ { .compatible = "denali,denali-nand-dt" },
+ { /* sentinel */ }
+ };
+
+MODULE_DEVICE_TABLE(of, denali_nand_dt_ids);
+
+static u64 denali_dma_mask;
+
+static int denali_dt_probe(struct platform_device *ofdev)
+{
+ struct resource *denali_reg, *nand_data;
+ struct denali_dt *dt;
+ struct denali_nand_info *denali;
+ int ret;
+ const struct of_device_id *of_id;
+
+ of_id = of_match_device(denali_nand_dt_ids, &ofdev->dev);
+ if (of_id) {
+ ofdev->id_entry = of_id->data;
+ } else {
+ pr_err("Failed to find the right device id.\n");
+ return -ENOMEM;
+ }
+
+ dt = devm_kzalloc(&ofdev->dev, sizeof(*dt), GFP_KERNEL);
+ if (!dt)
+ return -ENOMEM;
+ denali = &dt->denali;
+
+ denali_reg = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "denali_reg");
+ nand_data = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "nand_data");
+ if (!denali_reg || !nand_data) {
+ dev_err(&ofdev->dev, "resources not completely defined\n");
+ return -EINVAL;
+ }
+
+ denali->platform = DT;
+ denali->dev = &ofdev->dev;
+ denali->irq = platform_get_irq(ofdev, 0);
+ if (denali->irq < 0) {
+ dev_err(&ofdev->dev, "no irq defined\n");
+ return -ENXIO;
+ }
+
+ denali->flash_reg = request_and_map(&ofdev->dev, denali_reg);
+ if (!denali->flash_reg)
+ return -ENOMEM;
+
+ denali->flash_mem = request_and_map(&ofdev->dev, nand_data);
+ if (!denali->flash_mem)
+ return -ENOMEM;
+
+ if (!of_property_read_u32(ofdev->dev.of_node,
+ "dma-mask", (u32 *)&denali_dma_mask)) {
+ denali->dev->dma_mask = &denali_dma_mask;
+ } else {
+ denali->dev->dma_mask = NULL;
+ }
+
+ dt->clk = clk_get(&ofdev->dev, NULL);
+ if (IS_ERR(dt->clk)) {
+ dev_err(&ofdev->dev, "no clk available\n");
+ return PTR_ERR(dt->clk);
+ }
+ clk_prepare_enable(dt->clk);
+
+ ret = denali_init(denali);
+ if (ret)
+ goto out_disable_clk;
+
+ platform_set_drvdata(ofdev, dt);
+ return 0;
+
+out_disable_clk:
+ clk_disable_unprepare(dt->clk);
+ clk_put(dt->clk);
+
+ return ret;
+}
+
+static int denali_dt_remove(struct platform_device *ofdev)
+{
+ struct denali_dt *dt = platform_get_drvdata(ofdev);
+
+ denali_remove(&dt->denali);
+ clk_disable(dt->clk);
+ clk_put(dt->clk);
+
+ return 0;
+}
+
+static struct platform_driver denali_dt_driver = {
+ .probe = denali_dt_probe,
+ .remove = denali_dt_remove,
+ .driver = {
+ .name = "denali-nand-dt",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(denali_nand_dt_ids),
+ },
+};
+
+static int __init denali_init_dt(void)
+{
+ return platform_driver_register(&denali_dt_driver);
+}
+module_init(denali_init_dt);
+
+static void __exit denali_exit_dt(void)
+{
+ platform_driver_unregister(&denali_dt_driver);
+}
+module_exit(denali_exit_dt);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jamie Iles");
+MODULE_DESCRIPTION("DT driver for Denali NAND controller");
diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c
new file mode 100644
index 0000000..e3e4662
--- /dev/null
+++ b/drivers/mtd/nand/denali_pci.c
@@ -0,0 +1,144 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright © 2009-2010, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include "denali.h"
+
+#define DENALI_NAND_NAME "denali-nand-pci"
+
+/* List of platforms this NAND controller has be integrated into */
+static DEFINE_PCI_DEVICE_TABLE(denali_pci_ids) = {
+ { PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
+ { PCI_VDEVICE(INTEL, 0x0809), INTEL_MRST },
+ { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, denali_pci_ids);
+
+static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ int ret = -ENODEV;
+ resource_size_t csr_base, mem_base;
+ unsigned long csr_len, mem_len;
+ struct denali_nand_info *denali;
+
+ denali = kzalloc(sizeof(*denali), GFP_KERNEL);
+ if (!denali)
+ return -ENOMEM;
+
+ ret = pci_enable_device(dev);
+ if (ret) {
+ pr_err("Spectra: pci_enable_device failed.\n");
+ goto failed_alloc_memery;
+ }
+
+ if (id->driver_data == INTEL_CE4100) {
+ denali->platform = INTEL_CE4100;
+ mem_base = pci_resource_start(dev, 0);
+ mem_len = pci_resource_len(dev, 1);
+ csr_base = pci_resource_start(dev, 1);
+ csr_len = pci_resource_len(dev, 1);
+ } else {
+ denali->platform = INTEL_MRST;
+ csr_base = pci_resource_start(dev, 0);
+ csr_len = pci_resource_len(dev, 0);
+ mem_base = pci_resource_start(dev, 1);
+ mem_len = pci_resource_len(dev, 1);
+ if (!mem_len) {
+ mem_base = csr_base + csr_len;
+ mem_len = csr_len;
+ }
+ }
+
+ pci_set_master(dev);
+ denali->dev = &dev->dev;
+ denali->irq = dev->irq;
+
+ ret = pci_request_regions(dev, DENALI_NAND_NAME);
+ if (ret) {
+ pr_err("Spectra: Unable to request memory regions\n");
+ goto failed_enable_dev;
+ }
+
+ denali->flash_reg = ioremap_nocache(csr_base, csr_len);
+ if (!denali->flash_reg) {
+ pr_err("Spectra: Unable to remap memory region\n");
+ ret = -ENOMEM;
+ goto failed_req_regions;
+ }
+
+ denali->flash_mem = ioremap_nocache(mem_base, mem_len);
+ if (!denali->flash_mem) {
+ pr_err("Spectra: ioremap_nocache failed!");
+ ret = -ENOMEM;
+ goto failed_remap_reg;
+ }
+
+ ret = denali_init(denali);
+ if (ret)
+ goto failed_remap_mem;
+
+ pci_set_drvdata(dev, denali);
+
+ return 0;
+
+failed_remap_mem:
+ iounmap(denali->flash_mem);
+failed_remap_reg:
+ iounmap(denali->flash_reg);
+failed_req_regions:
+ pci_release_regions(dev);
+failed_enable_dev:
+ pci_disable_device(dev);
+failed_alloc_memery:
+ kfree(denali);
+
+ return ret;
+}
+
+/* driver exit point */
+static void denali_pci_remove(struct pci_dev *dev)
+{
+ struct denali_nand_info *denali = pci_get_drvdata(dev);
+
+ denali_remove(denali);
+ iounmap(denali->flash_reg);
+ iounmap(denali->flash_mem);
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ pci_set_drvdata(dev, NULL);
+ kfree(denali);
+}
+
+static struct pci_driver denali_pci_driver = {
+ .name = DENALI_NAND_NAME,
+ .id_table = denali_pci_ids,
+ .probe = denali_pci_probe,
+ .remove = denali_pci_remove,
+};
+
+static int denali_init_pci(void)
+{
+ pr_info("Spectra MTD driver built on %s @ %s\n", __DATE__, __TIME__);
+ return pci_register_driver(&denali_pci_driver);
+}
+module_init(denali_init_pci);
+
+static void denali_exit_pci(void)
+{
+ pci_unregister_driver(&denali_pci_driver);
+}
+module_exit(denali_exit_pci);
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 256eb30..81fa578 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -53,8 +53,6 @@
0xe0000, 0xe2000, 0xe4000, 0xe6000,
0xe8000, 0xea000, 0xec000, 0xee000,
#endif /* CONFIG_MTD_DOCPROBE_HIGH */
-#else
-#warning Unknown architecture for DiskOnChip. No default probe locations defined
#endif
0xffffffff };
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index 799da5d..18fa448 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -46,6 +46,25 @@
#include <linux/bitrev.h>
/*
+ * In "reliable mode" consecutive 2k pages are used in parallel (in some
+ * fashion) to store the same data. The data can be read back from the
+ * even-numbered pages in the normal manner; odd-numbered pages will appear to
+ * contain junk. Systems that boot from the docg4 typically write the secondary
+ * program loader (SPL) code in this mode. The SPL is loaded by the initial
+ * program loader (IPL, stored in the docg4's 2k NOR-like region that is mapped
+ * to the reset vector address). This module parameter enables you to use this
+ * driver to write the SPL. When in this mode, no more than 2k of data can be
+ * written at a time, because the addresses do not increment in the normal
+ * manner, and the starting offset must be within an even-numbered 2k region;
+ * i.e., invalid starting offsets are 0x800, 0xa00, 0xc00, 0xe00, 0x1800,
+ * 0x1a00, ... Reliable mode is a special case and should not be used unless
+ * you know what you're doing.
+ */
+static bool reliable_mode;
+module_param(reliable_mode, bool, 0);
+MODULE_PARM_DESC(reliable_mode, "pages are programmed in reliable mode");
+
+/*
* You'll want to ignore badblocks if you're reading a partition that contains
* data written by the TrueFFS library (i.e., by PalmOS, Windows, etc), since
* it does not use mtd nand's method for marking bad blocks (using oob area).
@@ -113,6 +132,7 @@
#define DOCG4_SEQ_PAGEWRITE 0x16
#define DOCG4_SEQ_PAGEPROG 0x1e
#define DOCG4_SEQ_BLOCKERASE 0x24
+#define DOCG4_SEQ_SETMODE 0x45
/* DOC_FLASHCOMMAND register commands */
#define DOCG4_CMD_PAGE_READ 0x00
@@ -122,6 +142,8 @@
#define DOC_CMD_PROG_BLOCK_ADDR 0x60
#define DOCG4_CMD_PAGEWRITE 0x80
#define DOC_CMD_PROG_CYCLE2 0x10
+#define DOCG4_CMD_FAST_MODE 0xa3 /* functionality guessed */
+#define DOC_CMD_RELIABLE_MODE 0x22
#define DOC_CMD_RESET 0xff
/* DOC_POWERMODE register bits */
@@ -190,17 +212,20 @@
#define DOCG4_T 4 /* BCH alg corrects up to 4 bit errors */
#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */
+#define DOCG4_REDUNDANT_BBT_PAGE 24 /* page where redundant factory bbt lives */
/*
- * Oob bytes 0 - 6 are available to the user.
- * Byte 7 is hamming ecc for first 7 bytes. Bytes 8 - 14 are hw-generated ecc.
+ * Bytes 0, 1 are used as badblock marker.
+ * Bytes 2 - 6 are available to the user.
+ * Byte 7 is hamming ecc for first 7 oob bytes only.
+ * Bytes 8 - 14 are hw-generated ecc covering entire page + oob bytes 0 - 14.
* Byte 15 (the last) is used by the driver as a "page written" flag.
*/
static struct nand_ecclayout docg4_oobinfo = {
.eccbytes = 9,
.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
- .oobavail = 7,
- .oobfree = { {0, 7} }
+ .oobavail = 5,
+ .oobfree = { {.offset = 2, .length = 5} }
};
/*
@@ -611,6 +636,14 @@
dev_dbg(doc->dev,
"docg4: %s: g4 addr: %x\n", __func__, docg4_addr);
sequence_reset(mtd);
+
+ if (unlikely(reliable_mode)) {
+ writew(DOCG4_SEQ_SETMODE, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_FAST_MODE, docptr + DOC_FLASHCOMMAND);
+ writew(DOC_CMD_RELIABLE_MODE, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ }
+
writew(DOCG4_SEQ_PAGEWRITE, docptr + DOC_FLASHSEQUENCE);
writew(DOCG4_CMD_PAGEWRITE, docptr + DOC_FLASHCOMMAND);
write_nop(docptr);
@@ -691,6 +724,15 @@
break;
case NAND_CMD_SEQIN:
+ if (unlikely(reliable_mode)) {
+ uint16_t g4_page = g4_addr >> 16;
+
+ /* writes to odd-numbered 2k pages are invalid */
+ if (g4_page & 0x01)
+ dev_warn(doc->dev,
+ "invalid reliable mode address\n");
+ }
+
write_page_prologue(mtd, g4_addr);
/* hack for deferred write of oob bytes */
@@ -979,16 +1021,15 @@
struct docg4_priv *doc = nand->priv;
uint32_t g4_addr = mtd_to_docg4_address(DOCG4_FACTORY_BBT_PAGE, 0);
uint8_t *buf;
- int i, block, status;
+ int i, block;
+ __u32 eccfailed_stats = mtd->ecc_stats.failed;
buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL);
if (buf == NULL)
return -ENOMEM;
read_page_prologue(mtd, g4_addr);
- status = docg4_read_page(mtd, nand, buf, 0, DOCG4_FACTORY_BBT_PAGE);
- if (status)
- goto exit;
+ docg4_read_page(mtd, nand, buf, 0, DOCG4_FACTORY_BBT_PAGE);
/*
* If no memory-based bbt was created, exit. This will happen if module
@@ -1000,6 +1041,20 @@
if (nand->bbt == NULL) /* no memory-based bbt */
goto exit;
+ if (mtd->ecc_stats.failed > eccfailed_stats) {
+ /*
+ * Whoops, an ecc failure ocurred reading the factory bbt.
+ * It is stored redundantly, so we get another chance.
+ */
+ eccfailed_stats = mtd->ecc_stats.failed;
+ docg4_read_page(mtd, nand, buf, 0, DOCG4_REDUNDANT_BBT_PAGE);
+ if (mtd->ecc_stats.failed > eccfailed_stats) {
+ dev_warn(doc->dev,
+ "The factory bbt could not be read!\n");
+ goto exit;
+ }
+ }
+
/*
* Parse factory bbt and update memory-based bbt. Factory bbt format is
* simple: one bit per block, block numbers increase left to right (msb
@@ -1019,7 +1074,7 @@
}
exit:
kfree(buf);
- return status;
+ return 0;
}
static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs)
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index cc1480a..2065720 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -109,20 +109,6 @@
};
/*
- * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset
- * 1, so we have to adjust bad block pattern. This pattern should be used for
- * x8 chips only. So far hardware does not support x16 chips anyway.
- */
-static u8 scan_ff_pattern[] = { 0xff, };
-
-static struct nand_bbt_descr largepage_memorybased = {
- .options = 0,
- .offs = 0,
- .len = 1,
- .pattern = scan_ff_pattern,
-};
-
-/*
* ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
* interfere with ECC positions, that's why we implement our own descriptors.
* OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
@@ -699,7 +685,6 @@
chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
&fsl_elbc_oob_lp_eccm1 :
&fsl_elbc_oob_lp_eccm0;
- chip->badblock_pattern = &largepage_memorybased;
}
} else {
dev_err(priv->dev,
@@ -814,7 +799,7 @@
static DEFINE_MUTEX(fsl_elbc_nand_mutex);
-static int __devinit fsl_elbc_nand_probe(struct platform_device *pdev)
+static int fsl_elbc_nand_probe(struct platform_device *pdev)
{
struct fsl_lbc_regs __iomem *lbc;
struct fsl_elbc_mtd *priv;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 3551a99..ad62226 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -389,7 +389,7 @@
timing = IFC_FIR_OP_RBCD;
out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
(timing << IFC_NAND_FIR0_OP2_SHIFT));
out_be32(&ifc->ifc_nand.nand_fcr0,
@@ -754,7 +754,7 @@
/* READID */
out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
out_be32(&ifc->ifc_nand.nand_fcr0,
@@ -922,7 +922,7 @@
static DEFINE_MUTEX(fsl_ifc_nand_mutex);
-static int __devinit fsl_ifc_nand_probe(struct platform_device *dev)
+static int fsl_ifc_nand_probe(struct platform_device *dev)
{
struct fsl_ifc_regs __iomem *ifc;
struct fsl_ifc_mtd *priv;
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 45df542..5a8f5c4 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -152,7 +152,7 @@
fun_wait_rnb(fun);
}
-static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
+static int fun_chip_init(struct fsl_upm_nand *fun,
const struct device_node *upm_np,
const struct resource *io_res)
{
@@ -201,7 +201,7 @@
return ret;
}
-static int __devinit fun_probe(struct platform_device *ofdev)
+static int fun_probe(struct platform_device *ofdev)
{
struct fsl_upm_nand *fun;
struct resource io_res;
@@ -318,7 +318,7 @@
return ret;
}
-static int __devexit fun_remove(struct platform_device *ofdev)
+static int fun_remove(struct platform_device *ofdev)
{
struct fsl_upm_nand *fun = dev_get_drvdata(&ofdev->dev);
int i;
@@ -350,7 +350,7 @@
.of_match_table = of_fun_match,
},
.probe = fun_probe,
- .remove = __devexit_p(fun_remove),
+ .remove = fun_remove,
};
module_platform_driver(of_fun_driver);
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 38d2624..1d74464 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -361,7 +361,7 @@
struct nand_chip *this = mtd->priv;
struct fsmc_nand_data *host = container_of(mtd,
struct fsmc_nand_data, mtd);
- void *__iomem *regs = host->regs_va;
+ void __iomem *regs = host->regs_va;
unsigned int bank = host->bank;
if (ctrl & NAND_CTRL_CHANGE) {
@@ -383,13 +383,13 @@
pc |= FSMC_ENABLE;
else
pc &= ~FSMC_ENABLE;
- writel(pc, FSMC_NAND_REG(regs, bank, PC));
+ writel_relaxed(pc, FSMC_NAND_REG(regs, bank, PC));
}
mb();
if (cmd != NAND_CMD_NONE)
- writeb(cmd, this->IO_ADDR_W);
+ writeb_relaxed(cmd, this->IO_ADDR_W);
}
/*
@@ -426,14 +426,18 @@
tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT;
if (busw)
- writel(value | FSMC_DEVWID_16, FSMC_NAND_REG(regs, bank, PC));
+ writel_relaxed(value | FSMC_DEVWID_16,
+ FSMC_NAND_REG(regs, bank, PC));
else
- writel(value | FSMC_DEVWID_8, FSMC_NAND_REG(regs, bank, PC));
+ writel_relaxed(value | FSMC_DEVWID_8,
+ FSMC_NAND_REG(regs, bank, PC));
- writel(readl(FSMC_NAND_REG(regs, bank, PC)) | tclr | tar,
+ writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | tclr | tar,
FSMC_NAND_REG(regs, bank, PC));
- writel(thiz | thold | twait | tset, FSMC_NAND_REG(regs, bank, COMM));
- writel(thiz | thold | twait | tset, FSMC_NAND_REG(regs, bank, ATTRIB));
+ writel_relaxed(thiz | thold | twait | tset,
+ FSMC_NAND_REG(regs, bank, COMM));
+ writel_relaxed(thiz | thold | twait | tset,
+ FSMC_NAND_REG(regs, bank, ATTRIB));
}
/*
@@ -446,11 +450,11 @@
void __iomem *regs = host->regs_va;
uint32_t bank = host->bank;
- writel(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCPLEN_256,
+ writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCPLEN_256,
FSMC_NAND_REG(regs, bank, PC));
- writel(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCEN,
+ writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCEN,
FSMC_NAND_REG(regs, bank, PC));
- writel(readl(FSMC_NAND_REG(regs, bank, PC)) | FSMC_ECCEN,
+ writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | FSMC_ECCEN,
FSMC_NAND_REG(regs, bank, PC));
}
@@ -470,7 +474,7 @@
unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT;
do {
- if (readl(FSMC_NAND_REG(regs, bank, STS)) & FSMC_CODE_RDY)
+ if (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) & FSMC_CODE_RDY)
break;
else
cond_resched();
@@ -481,25 +485,25 @@
return -ETIMEDOUT;
}
- ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC1));
+ ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
ecc[0] = (uint8_t) (ecc_tmp >> 0);
ecc[1] = (uint8_t) (ecc_tmp >> 8);
ecc[2] = (uint8_t) (ecc_tmp >> 16);
ecc[3] = (uint8_t) (ecc_tmp >> 24);
- ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC2));
+ ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2));
ecc[4] = (uint8_t) (ecc_tmp >> 0);
ecc[5] = (uint8_t) (ecc_tmp >> 8);
ecc[6] = (uint8_t) (ecc_tmp >> 16);
ecc[7] = (uint8_t) (ecc_tmp >> 24);
- ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC3));
+ ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3));
ecc[8] = (uint8_t) (ecc_tmp >> 0);
ecc[9] = (uint8_t) (ecc_tmp >> 8);
ecc[10] = (uint8_t) (ecc_tmp >> 16);
ecc[11] = (uint8_t) (ecc_tmp >> 24);
- ecc_tmp = readl(FSMC_NAND_REG(regs, bank, STS));
+ ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, STS));
ecc[12] = (uint8_t) (ecc_tmp >> 16);
return 0;
@@ -519,7 +523,7 @@
uint32_t bank = host->bank;
uint32_t ecc_tmp;
- ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC1));
+ ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
ecc[0] = (uint8_t) (ecc_tmp >> 0);
ecc[1] = (uint8_t) (ecc_tmp >> 8);
ecc[2] = (uint8_t) (ecc_tmp >> 16);
@@ -601,7 +605,7 @@
dma_async_issue_pending(chan);
ret =
- wait_for_completion_interruptible_timeout(&host->dma_access_complete,
+ wait_for_completion_timeout(&host->dma_access_complete,
msecs_to_jiffies(3000));
if (ret <= 0) {
chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
@@ -628,10 +632,10 @@
uint32_t *p = (uint32_t *)buf;
len = len >> 2;
for (i = 0; i < len; i++)
- writel(p[i], chip->IO_ADDR_W);
+ writel_relaxed(p[i], chip->IO_ADDR_W);
} else {
for (i = 0; i < len; i++)
- writeb(buf[i], chip->IO_ADDR_W);
+ writeb_relaxed(buf[i], chip->IO_ADDR_W);
}
}
@@ -651,10 +655,10 @@
uint32_t *p = (uint32_t *)buf;
len = len >> 2;
for (i = 0; i < len; i++)
- p[i] = readl(chip->IO_ADDR_R);
+ p[i] = readl_relaxed(chip->IO_ADDR_R);
} else {
for (i = 0; i < len; i++)
- buf[i] = readb(chip->IO_ADDR_R);
+ buf[i] = readb_relaxed(chip->IO_ADDR_R);
}
}
@@ -783,7 +787,7 @@
uint32_t num_err, i;
uint32_t ecc1, ecc2, ecc3, ecc4;
- num_err = (readl(FSMC_NAND_REG(regs, bank, STS)) >> 10) & 0xF;
+ num_err = (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) >> 10) & 0xF;
/* no bit flipping */
if (likely(num_err == 0))
@@ -826,10 +830,10 @@
* uint64_t array and error offset indexes are populated in err_idx
* array
*/
- ecc1 = readl(FSMC_NAND_REG(regs, bank, ECC1));
- ecc2 = readl(FSMC_NAND_REG(regs, bank, ECC2));
- ecc3 = readl(FSMC_NAND_REG(regs, bank, ECC3));
- ecc4 = readl(FSMC_NAND_REG(regs, bank, STS));
+ ecc1 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
+ ecc2 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2));
+ ecc3 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3));
+ ecc4 = readl_relaxed(FSMC_NAND_REG(regs, bank, STS));
err_idx[0] = (ecc1 >> 0) & 0x1FFF;
err_idx[1] = (ecc1 >> 13) & 0x1FFF;
@@ -860,7 +864,7 @@
}
#ifdef CONFIG_OF
-static int __devinit fsmc_nand_probe_config_dt(struct platform_device *pdev,
+static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
struct device_node *np)
{
struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -876,15 +880,13 @@
return -EINVAL;
}
}
- of_property_read_u32(np, "st,ale-off", &pdata->ale_off);
- of_property_read_u32(np, "st,cle-off", &pdata->cle_off);
if (of_get_property(np, "nand-skip-bbtscan", NULL))
pdata->options = NAND_SKIP_BBTSCAN;
return 0;
}
#else
-static int __devinit fsmc_nand_probe_config_dt(struct platform_device *pdev,
+static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
struct device_node *np)
{
return -ENOSYS;
@@ -935,41 +937,28 @@
if (!res)
return -EINVAL;
- if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
- pdev->name)) {
- dev_err(&pdev->dev, "Failed to get memory data resourse\n");
- return -ENOENT;
- }
-
- host->data_pa = (dma_addr_t)res->start;
- host->data_va = devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
+ host->data_va = devm_request_and_ioremap(&pdev->dev, res);
if (!host->data_va) {
dev_err(&pdev->dev, "data ioremap failed\n");
return -ENOMEM;
}
+ host->data_pa = (dma_addr_t)res->start;
- if (!devm_request_mem_region(&pdev->dev, res->start + pdata->ale_off,
- resource_size(res), pdev->name)) {
- dev_err(&pdev->dev, "Failed to get memory ale resourse\n");
- return -ENOENT;
- }
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
+ if (!res)
+ return -EINVAL;
- host->addr_va = devm_ioremap(&pdev->dev, res->start + pdata->ale_off,
- resource_size(res));
+ host->addr_va = devm_request_and_ioremap(&pdev->dev, res);
if (!host->addr_va) {
dev_err(&pdev->dev, "ale ioremap failed\n");
return -ENOMEM;
}
- if (!devm_request_mem_region(&pdev->dev, res->start + pdata->cle_off,
- resource_size(res), pdev->name)) {
- dev_err(&pdev->dev, "Failed to get memory cle resourse\n");
- return -ENOENT;
- }
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
+ if (!res)
+ return -EINVAL;
- host->cmd_va = devm_ioremap(&pdev->dev, res->start + pdata->cle_off,
- resource_size(res));
+ host->cmd_va = devm_request_and_ioremap(&pdev->dev, res);
if (!host->cmd_va) {
dev_err(&pdev->dev, "ale ioremap failed\n");
return -ENOMEM;
@@ -979,14 +968,7 @@
if (!res)
return -EINVAL;
- if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
- pdev->name)) {
- dev_err(&pdev->dev, "Failed to get memory regs resourse\n");
- return -ENOENT;
- }
-
- host->regs_va = devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
+ host->regs_va = devm_request_and_ioremap(&pdev->dev, res);
if (!host->regs_va) {
dev_err(&pdev->dev, "regs ioremap failed\n");
return -ENOMEM;
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index bc73bc5..e789e3f 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -90,14 +90,14 @@
{
struct nand_chip *this = mtd->priv;
- writesb(this->IO_ADDR_W, buf, len);
+ iowrite8_rep(this->IO_ADDR_W, buf, len);
}
static void gpio_nand_readbuf(struct mtd_info *mtd, u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
- readsb(this->IO_ADDR_R, buf, len);
+ ioread8_rep(this->IO_ADDR_R, buf, len);
}
static void gpio_nand_writebuf16(struct mtd_info *mtd, const u_char *buf,
@@ -106,7 +106,7 @@
struct nand_chip *this = mtd->priv;
if (IS_ALIGNED((unsigned long)buf, 2)) {
- writesw(this->IO_ADDR_W, buf, len>>1);
+ iowrite16_rep(this->IO_ADDR_W, buf, len>>1);
} else {
int i;
unsigned short *ptr = (unsigned short *)buf;
@@ -121,7 +121,7 @@
struct nand_chip *this = mtd->priv;
if (IS_ALIGNED((unsigned long)buf, 2)) {
- readsw(this->IO_ADDR_R, buf, len>>1);
+ ioread16_rep(this->IO_ADDR_R, buf, len>>1);
} else {
int i;
unsigned short *ptr = (unsigned short *)buf;
@@ -134,7 +134,11 @@
static int gpio_nand_devready(struct mtd_info *mtd)
{
struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
- return gpio_get_value(gpiomtd->plat.gpio_rdy);
+
+ if (gpio_is_valid(gpiomtd->plat.gpio_rdy))
+ return gpio_get_value(gpiomtd->plat.gpio_rdy);
+
+ return 1;
}
#ifdef CONFIG_OF
@@ -227,7 +231,7 @@
return platform_get_resource(pdev, IORESOURCE_MEM, 1);
}
-static int __devexit gpio_nand_remove(struct platform_device *dev)
+static int gpio_nand_remove(struct platform_device *dev)
{
struct gpiomtd *gpiomtd = platform_get_drvdata(dev);
struct resource *res;
@@ -252,7 +256,8 @@
gpio_free(gpiomtd->plat.gpio_nce);
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
gpio_free(gpiomtd->plat.gpio_nwp);
- gpio_free(gpiomtd->plat.gpio_rdy);
+ if (gpio_is_valid(gpiomtd->plat.gpio_rdy))
+ gpio_free(gpiomtd->plat.gpio_rdy);
kfree(gpiomtd);
@@ -277,7 +282,7 @@
return ptr;
}
-static int __devinit gpio_nand_probe(struct platform_device *dev)
+static int gpio_nand_probe(struct platform_device *dev)
{
struct gpiomtd *gpiomtd;
struct nand_chip *this;
@@ -336,10 +341,12 @@
if (ret)
goto err_cle;
gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
- ret = gpio_request(gpiomtd->plat.gpio_rdy, "NAND RDY");
- if (ret)
- goto err_rdy;
- gpio_direction_input(gpiomtd->plat.gpio_rdy);
+ if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) {
+ ret = gpio_request(gpiomtd->plat.gpio_rdy, "NAND RDY");
+ if (ret)
+ goto err_rdy;
+ gpio_direction_input(gpiomtd->plat.gpio_rdy);
+ }
this->IO_ADDR_W = this->IO_ADDR_R;
@@ -386,7 +393,8 @@
err_wp:
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
- gpio_free(gpiomtd->plat.gpio_rdy);
+ if (gpio_is_valid(gpiomtd->plat.gpio_rdy))
+ gpio_free(gpiomtd->plat.gpio_rdy);
err_rdy:
gpio_free(gpiomtd->plat.gpio_cle);
err_cle:
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 3502acc..d84699c 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -18,7 +18,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
-#include <linux/mtd/gpmi-nand.h>
#include <linux/delay.h>
#include <linux/clk.h>
@@ -166,6 +165,15 @@
if (ret)
goto err_out;
+ /*
+ * Reset BCH here, too. We got failures otherwise :(
+ * See later BCH reset for explanation of MX23 handling
+ */
+ ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
+ if (ret)
+ goto err_out;
+
+
/* Choose NAND mode. */
writel(BM_GPMI_CTRL1_GPMI_MODE, r->gpmi_regs + HW_GPMI_CTRL1_CLR);
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index d79696b..5cd141f 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -25,7 +25,6 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/module.h>
-#include <linux/mtd/gpmi-nand.h>
#include <linux/mtd/partitions.h>
#include <linux/pinctrl/consumer.h>
#include <linux/of.h>
@@ -33,6 +32,12 @@
#include <linux/of_mtd.h>
#include "gpmi-nand.h"
+/* Resource names for the GPMI NAND driver. */
+#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand"
+#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "bch"
+#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "bch"
+#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "gpmi-dma"
+
/* add our owner bbt descriptor */
static uint8_t scan_ff_pattern[] = { 0xff };
static struct nand_bbt_descr gpmi_bbt_descr = {
@@ -222,7 +227,7 @@
ret = dma_map_sg(this->dev, sgl, 1, dr);
if (ret == 0)
- pr_err("map failed.\n");
+ pr_err("DMA mapping failed.\n");
this->direct_dma_map_ok = false;
}
@@ -314,7 +319,7 @@
return 0;
}
-static int __devinit
+static int
acquire_register_block(struct gpmi_nand_data *this, const char *res_name)
{
struct platform_device *pdev = this->pdev;
@@ -355,7 +360,7 @@
res->bch_regs = NULL;
}
-static int __devinit
+static int
acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h)
{
struct platform_device *pdev = this->pdev;
@@ -422,7 +427,7 @@
}
}
-static int __devinit acquire_dma_channels(struct gpmi_nand_data *this)
+static int acquire_dma_channels(struct gpmi_nand_data *this)
{
struct platform_device *pdev = this->pdev;
struct resource *r_dma;
@@ -456,7 +461,7 @@
dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
if (!dma_chan) {
- pr_err("dma_request_channel failed.\n");
+ pr_err("Failed to request DMA channel.\n");
goto acquire_err;
}
@@ -487,7 +492,7 @@
"gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
};
-static int __devinit gpmi_get_clks(struct gpmi_nand_data *this)
+static int gpmi_get_clks(struct gpmi_nand_data *this)
{
struct resources *r = &this->resources;
char **extra_clks = NULL;
@@ -533,7 +538,7 @@
return -ENOMEM;
}
-static int __devinit acquire_resources(struct gpmi_nand_data *this)
+static int acquire_resources(struct gpmi_nand_data *this)
{
struct pinctrl *pinctrl;
int ret;
@@ -583,7 +588,7 @@
release_dma_channels(this);
}
-static int __devinit init_hardware(struct gpmi_nand_data *this)
+static int init_hardware(struct gpmi_nand_data *this)
{
int ret;
@@ -625,7 +630,8 @@
length, DMA_FROM_DEVICE);
if (dma_mapping_error(dev, dest_phys)) {
if (alt_size < length) {
- pr_err("Alternate buffer is too small\n");
+ pr_err("%s, Alternate buffer is too small\n",
+ __func__);
return -ENOMEM;
}
goto map_failed;
@@ -675,7 +681,8 @@
DMA_TO_DEVICE);
if (dma_mapping_error(dev, source_phys)) {
if (alt_size < length) {
- pr_err("Alternate buffer is too small\n");
+ pr_err("%s, Alternate buffer is too small\n",
+ __func__);
return -ENOMEM;
}
goto map_failed;
@@ -763,7 +770,7 @@
error_alloc:
gpmi_free_dma_buffer(this);
- pr_err("allocate DMA buffer ret!!\n");
+ pr_err("Error allocating DMA buffers!\n");
return -ENOMEM;
}
@@ -1474,7 +1481,7 @@
/* Set up the NFC geometry which is used by BCH. */
ret = bch_set_geometry(this);
if (ret) {
- pr_err("set geometry ret : %d\n", ret);
+ pr_err("Error setting BCH geometry : %d\n", ret);
return ret;
}
@@ -1535,7 +1542,7 @@
gpmi_free_dma_buffer(this);
}
-static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
+static int gpmi_nfc_init(struct gpmi_nand_data *this)
{
struct mtd_info *mtd = &this->mtd;
struct nand_chip *chip = &this->nand;
@@ -1618,7 +1625,7 @@
};
MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
-static int __devinit gpmi_nand_probe(struct platform_device *pdev)
+static int gpmi_nand_probe(struct platform_device *pdev)
{
struct gpmi_nand_data *this;
const struct of_device_id *of_id;
@@ -1668,7 +1675,7 @@
return ret;
}
-static int __devexit gpmi_nand_remove(struct platform_device *pdev)
+static int gpmi_nand_remove(struct platform_device *pdev)
{
struct gpmi_nand_data *this = platform_get_drvdata(pdev);
@@ -1685,7 +1692,7 @@
.of_match_table = gpmi_nand_id_table,
},
.probe = gpmi_nand_probe,
- .remove = __devexit_p(gpmi_nand_remove),
+ .remove = gpmi_nand_remove,
.id_table = gpmi_ids,
};
module_platform_driver(gpmi_nand_driver);
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 7ac25c1..3d93a5e 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -130,7 +130,6 @@
/* System Interface */
struct device *dev;
struct platform_device *pdev;
- struct gpmi_nand_platform_data *pdata;
/* Resources */
struct resources resources;
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index 100b677..8d415f01 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -316,13 +316,17 @@
return ret;
}
-static inline void jz_nand_iounmap_resource(struct resource *res, void __iomem *base)
+static inline void jz_nand_iounmap_resource(struct resource *res,
+ void __iomem *base)
{
iounmap(base);
release_mem_region(res->start, resource_size(res));
}
-static int __devinit jz_nand_detect_bank(struct platform_device *pdev, struct jz_nand *nand, unsigned char bank, size_t chipnr, uint8_t *nand_maf_id, uint8_t *nand_dev_id) {
+static int jz_nand_detect_bank(struct platform_device *pdev,
+ struct jz_nand *nand, unsigned char bank,
+ size_t chipnr, uint8_t *nand_maf_id,
+ uint8_t *nand_dev_id) {
int ret;
int gpio;
char gpio_name[9];
@@ -400,7 +404,7 @@
return ret;
}
-static int __devinit jz_nand_probe(struct platform_device *pdev)
+static int jz_nand_probe(struct platform_device *pdev)
{
int ret;
struct jz_nand *nand;
@@ -541,7 +545,7 @@
return ret;
}
-static int __devexit jz_nand_remove(struct platform_device *pdev)
+static int jz_nand_remove(struct platform_device *pdev)
{
struct jz_nand *nand = platform_get_drvdata(pdev);
struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
@@ -573,7 +577,7 @@
static struct platform_driver jz_nand_driver = {
.probe = jz_nand_probe,
- .remove = __devexit_p(jz_nand_remove),
+ .remove = jz_nand_remove,
.driver = {
.name = "jz4740-nand",
.owner = THIS_MODULE,
diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c
index c29b7ac..f182bef 100644
--- a/drivers/mtd/nand/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/lpc32xx_mlc.c
@@ -655,7 +655,7 @@
/*
* Probe for NAND controller
*/
-static int __devinit lpc32xx_nand_probe(struct platform_device *pdev)
+static int lpc32xx_nand_probe(struct platform_device *pdev)
{
struct lpc32xx_nand_host *host;
struct mtd_info *mtd;
@@ -845,7 +845,7 @@
/*
* Remove NAND device
*/
-static int __devexit lpc32xx_nand_remove(struct platform_device *pdev)
+static int lpc32xx_nand_remove(struct platform_device *pdev)
{
struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
struct mtd_info *mtd = &host->mtd;
@@ -907,7 +907,7 @@
static struct platform_driver lpc32xx_nand_driver = {
.probe = lpc32xx_nand_probe,
- .remove = __devexit_p(lpc32xx_nand_remove),
+ .remove = lpc32xx_nand_remove,
.resume = lpc32xx_nand_resume,
.suspend = lpc32xx_nand_suspend,
.driver = {
diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
index 32409c4..030b78c 100644
--- a/drivers/mtd/nand/lpc32xx_slc.c
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -755,7 +755,7 @@
/*
* Probe for NAND controller
*/
-static int __devinit lpc32xx_nand_probe(struct platform_device *pdev)
+static int lpc32xx_nand_probe(struct platform_device *pdev)
{
struct lpc32xx_nand_host *host;
struct mtd_info *mtd;
@@ -949,7 +949,7 @@
/*
* Remove NAND device.
*/
-static int __devexit lpc32xx_nand_remove(struct platform_device *pdev)
+static int lpc32xx_nand_remove(struct platform_device *pdev)
{
uint32_t tmp;
struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
@@ -1021,7 +1021,7 @@
static struct platform_driver lpc32xx_nand_driver = {
.probe = lpc32xx_nand_probe,
- .remove = __devexit_p(lpc32xx_nand_remove),
+ .remove = lpc32xx_nand_remove,
.resume = lpc32xx_nand_resume,
.suspend = lpc32xx_nand_suspend,
.driver = {
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index f776c85..3c9cdcb 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -626,7 +626,7 @@
iounmap(prv->csreg);
}
-static int __devinit mpc5121_nfc_probe(struct platform_device *op)
+static int mpc5121_nfc_probe(struct platform_device *op)
{
struct device_node *rootnode, *dn = op->dev.of_node;
struct device *dev = &op->dev;
@@ -827,7 +827,7 @@
return retval;
}
-static int __devexit mpc5121_nfc_remove(struct platform_device *op)
+static int mpc5121_nfc_remove(struct platform_device *op)
{
struct device *dev = &op->dev;
struct mtd_info *mtd = dev_get_drvdata(dev);
@@ -841,14 +841,14 @@
return 0;
}
-static struct of_device_id mpc5121_nfc_match[] __devinitdata = {
+static struct of_device_id mpc5121_nfc_match[] = {
{ .compatible = "fsl,mpc5121-nfc", },
{},
};
static struct platform_driver mpc5121_nfc_driver = {
.probe = mpc5121_nfc_probe,
- .remove = __devexit_p(mpc5121_nfc_remove),
+ .remove = mpc5121_nfc_remove,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 022dcdc..45204e4 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -266,7 +266,8 @@
}
};
-static const char *part_probes[] = { "RedBoot", "cmdlinepart", "ofpart", NULL };
+static const char const *part_probes[] = {
+ "cmdlinepart", "RedBoot", "ofpart", NULL };
static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size)
{
@@ -1378,7 +1379,7 @@
}
#endif
-static int __devinit mxcnd_probe(struct platform_device *pdev)
+static int mxcnd_probe(struct platform_device *pdev)
{
struct nand_chip *this;
struct mtd_info *mtd;
@@ -1556,12 +1557,13 @@
return 0;
escan:
- clk_disable_unprepare(host->clk);
+ if (host->clk_act)
+ clk_disable_unprepare(host->clk);
return err;
}
-static int __devexit mxcnd_remove(struct platform_device *pdev)
+static int mxcnd_remove(struct platform_device *pdev)
{
struct mxc_nand_host *host = platform_get_drvdata(pdev);
@@ -1580,7 +1582,7 @@
},
.id_table = mxcnd_devtype,
.probe = mxcnd_probe,
- .remove = __devexit_p(mxcnd_remove),
+ .remove = mxcnd_remove,
};
module_platform_driver(mxcnd_driver);
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 1a03b7f..8323ac9 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -93,8 +93,7 @@
.length = 78} }
};
-static int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd,
- int new_state);
+static int nand_get_device(struct mtd_info *mtd, int new_state);
static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops);
@@ -130,15 +129,12 @@
* nand_release_device - [GENERIC] release chip
* @mtd: MTD device structure
*
- * Deselect, release chip lock and wake up anyone waiting on the device.
+ * Release chip lock and wake up anyone waiting on the device.
*/
static void nand_release_device(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- /* De-select the NAND device */
- chip->select_chip(mtd, -1);
-
/* Release the controller and the chip */
spin_lock(&chip->controller->lock);
chip->controller->active = NULL;
@@ -160,7 +156,7 @@
}
/**
- * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
* nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
* @mtd: MTD device structure
*
@@ -303,7 +299,7 @@
if (getchip) {
chipnr = (int)(ofs >> chip->chip_shift);
- nand_get_device(chip, mtd, FL_READING);
+ nand_get_device(mtd, FL_READING);
/* Select the NAND device */
chip->select_chip(mtd, chipnr);
@@ -333,8 +329,10 @@
i++;
} while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE));
- if (getchip)
+ if (getchip) {
+ chip->select_chip(mtd, -1);
nand_release_device(mtd);
+ }
return res;
}
@@ -383,7 +381,7 @@
struct mtd_oob_ops ops;
loff_t wr_ofs = ofs;
- nand_get_device(chip, mtd, FL_WRITING);
+ nand_get_device(mtd, FL_WRITING);
ops.datbuf = NULL;
ops.oobbuf = buf;
@@ -492,7 +490,7 @@
void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- unsigned long timeo = jiffies + 2;
+ unsigned long timeo = jiffies + msecs_to_jiffies(20);
/* 400ms timeout */
if (in_interrupt() || oops_in_progress)
@@ -750,15 +748,15 @@
/**
* nand_get_device - [GENERIC] Get chip for selected access
- * @chip: the nand chip descriptor
* @mtd: MTD device structure
* @new_state: the state which is requested
*
* Get the device and lock it for exclusive access
*/
static int
-nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
+nand_get_device(struct mtd_info *mtd, int new_state)
{
+ struct nand_chip *chip = mtd->priv;
spinlock_t *lock = &chip->controller->lock;
wait_queue_head_t *wq = &chip->controller->wq;
DECLARE_WAITQUEUE(wait, current);
@@ -865,6 +863,8 @@
led_trigger_event(nand_led_trigger, LED_OFF);
status = (int)chip->read_byte(mtd);
+ /* This can happen if in case of timeout or buggy dev_ready */
+ WARN_ON(!(status & NAND_STATUS_READY));
return status;
}
@@ -899,7 +899,7 @@
/* Call wait ready function */
status = chip->waitfunc(mtd, chip);
/* See if device thinks it succeeded */
- if (status & 0x01) {
+ if (status & NAND_STATUS_FAIL) {
pr_debug("%s: error status = 0x%08x\n",
__func__, status);
ret = -EIO;
@@ -932,7 +932,7 @@
if (ofs + len == mtd->size)
len -= mtd->erasesize;
- nand_get_device(chip, mtd, FL_UNLOCKING);
+ nand_get_device(mtd, FL_UNLOCKING);
/* Shift to get chip number */
chipnr = ofs >> chip->chip_shift;
@@ -950,6 +950,7 @@
ret = __nand_unlock(mtd, ofs, len, 0);
out:
+ chip->select_chip(mtd, -1);
nand_release_device(mtd);
return ret;
@@ -981,7 +982,7 @@
if (check_offs_len(mtd, ofs, len))
ret = -EINVAL;
- nand_get_device(chip, mtd, FL_LOCKING);
+ nand_get_device(mtd, FL_LOCKING);
/* Shift to get chip number */
chipnr = ofs >> chip->chip_shift;
@@ -1004,7 +1005,7 @@
/* Call wait ready function */
status = chip->waitfunc(mtd, chip);
/* See if device thinks it succeeded */
- if (status & 0x01) {
+ if (status & NAND_STATUS_FAIL) {
pr_debug("%s: error status = 0x%08x\n",
__func__, status);
ret = -EIO;
@@ -1014,6 +1015,7 @@
ret = __nand_unlock(mtd, ofs, len, 0x1);
out:
+ chip->select_chip(mtd, -1);
nand_release_device(mtd);
return ret;
@@ -1550,6 +1552,7 @@
chip->select_chip(mtd, chipnr);
}
}
+ chip->select_chip(mtd, -1);
ops->retlen = ops->len - (size_t) readlen;
if (oob)
@@ -1577,11 +1580,10 @@
static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, uint8_t *buf)
{
- struct nand_chip *chip = mtd->priv;
struct mtd_oob_ops ops;
int ret;
- nand_get_device(chip, mtd, FL_READING);
+ nand_get_device(mtd, FL_READING);
ops.len = len;
ops.datbuf = buf;
ops.oobbuf = NULL;
@@ -1804,6 +1806,7 @@
chip->select_chip(mtd, chipnr);
}
}
+ chip->select_chip(mtd, -1);
ops->oobretlen = ops->ooblen - readlen;
@@ -1827,7 +1830,6 @@
static int nand_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
- struct nand_chip *chip = mtd->priv;
int ret = -ENOTSUPP;
ops->retlen = 0;
@@ -1839,7 +1841,7 @@
return -EINVAL;
}
- nand_get_device(chip, mtd, FL_READING);
+ nand_get_device(mtd, FL_READING);
switch (ops->mode) {
case MTD_OPS_PLACE_OOB:
@@ -2186,8 +2188,10 @@
chip->select_chip(mtd, chipnr);
/* Check, if it is write protected */
- if (nand_check_wp(mtd))
- return -EIO;
+ if (nand_check_wp(mtd)) {
+ ret = -EIO;
+ goto err_out;
+ }
realpage = (int)(to >> chip->page_shift);
page = realpage & chip->pagemask;
@@ -2199,8 +2203,10 @@
chip->pagebuf = -1;
/* Don't allow multipage oob writes with offset */
- if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
- return -EINVAL;
+ if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen)) {
+ ret = -EINVAL;
+ goto err_out;
+ }
while (1) {
int bytes = mtd->writesize;
@@ -2251,6 +2257,9 @@
ops->retlen = ops->len - writelen;
if (unlikely(oob))
ops->oobretlen = ops->ooblen;
+
+err_out:
+ chip->select_chip(mtd, -1);
return ret;
}
@@ -2302,11 +2311,10 @@
static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const uint8_t *buf)
{
- struct nand_chip *chip = mtd->priv;
struct mtd_oob_ops ops;
int ret;
- nand_get_device(chip, mtd, FL_WRITING);
+ nand_get_device(mtd, FL_WRITING);
ops.len = len;
ops.datbuf = (uint8_t *)buf;
ops.oobbuf = NULL;
@@ -2377,8 +2385,10 @@
chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
/* Check, if it is write protected */
- if (nand_check_wp(mtd))
+ if (nand_check_wp(mtd)) {
+ chip->select_chip(mtd, -1);
return -EROFS;
+ }
/* Invalidate the page cache, if we write to the cached page */
if (page == chip->pagebuf)
@@ -2391,6 +2401,8 @@
else
status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
+ chip->select_chip(mtd, -1);
+
if (status)
return status;
@@ -2408,7 +2420,6 @@
static int nand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
- struct nand_chip *chip = mtd->priv;
int ret = -ENOTSUPP;
ops->retlen = 0;
@@ -2420,7 +2431,7 @@
return -EINVAL;
}
- nand_get_device(chip, mtd, FL_WRITING);
+ nand_get_device(mtd, FL_WRITING);
switch (ops->mode) {
case MTD_OPS_PLACE_OOB:
@@ -2513,7 +2524,7 @@
return -EINVAL;
/* Grab the lock and see if the device is available */
- nand_get_device(chip, mtd, FL_ERASING);
+ nand_get_device(mtd, FL_ERASING);
/* Shift to get first page */
page = (int)(instr->addr >> chip->page_shift);
@@ -2623,6 +2634,7 @@
ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
/* Deselect and wake up anyone waiting on the device */
+ chip->select_chip(mtd, -1);
nand_release_device(mtd);
/* Do call back function */
@@ -2658,12 +2670,10 @@
*/
static void nand_sync(struct mtd_info *mtd)
{
- struct nand_chip *chip = mtd->priv;
-
pr_debug("%s: called\n", __func__);
/* Grab the lock and see if the device is available */
- nand_get_device(chip, mtd, FL_SYNCING);
+ nand_get_device(mtd, FL_SYNCING);
/* Release it and go back */
nand_release_device(mtd);
}
@@ -2749,9 +2759,7 @@
*/
static int nand_suspend(struct mtd_info *mtd)
{
- struct nand_chip *chip = mtd->priv;
-
- return nand_get_device(chip, mtd, FL_PM_SUSPENDED);
+ return nand_get_device(mtd, FL_PM_SUSPENDED);
}
/**
@@ -2849,6 +2857,8 @@
int i;
int val;
+ /* ONFI need to be probed in 8 bits mode */
+ WARN_ON(chip->options & NAND_BUSWIDTH_16);
/* Try ONFI for unknown chip or LP */
chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
@@ -2913,7 +2923,7 @@
*
* Check if an ID string is repeated within a given sequence of bytes at
* specific repetition interval period (e.g., {0x20,0x01,0x7F,0x20} has a
- * period of 2). This is a helper function for nand_id_len(). Returns non-zero
+ * period of 3). This is a helper function for nand_id_len(). Returns non-zero
* if the repetition has a period of @period; otherwise, returns zero.
*/
static int nand_id_has_period(u8 *id_data, int arrlen, int period)
@@ -3242,11 +3252,15 @@
break;
}
- /*
- * Check, if buswidth is correct. Hardware drivers should set
- * chip correct!
- */
- if (busw != (chip->options & NAND_BUSWIDTH_16)) {
+ if (chip->options & NAND_BUSWIDTH_AUTO) {
+ WARN_ON(chip->options & NAND_BUSWIDTH_16);
+ chip->options |= busw;
+ nand_set_defaults(chip, busw);
+ } else if (busw != (chip->options & NAND_BUSWIDTH_16)) {
+ /*
+ * Check, if buswidth is correct. Hardware drivers should set
+ * chip correct!
+ */
pr_info("NAND device: Manufacturer ID:"
" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
*dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
@@ -3285,10 +3299,10 @@
chip->cmdfunc = nand_command_lp;
pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s),"
- " page size: %d, OOB size: %d\n",
+ " %dMiB, page size: %d, OOB size: %d\n",
*maf_id, *dev_id, nand_manuf_ids[maf_idx].name,
chip->onfi_version ? chip->onfi_params.model : type->name,
- mtd->writesize, mtd->oobsize);
+ (int)(chip->chipsize >> 20), mtd->writesize, mtd->oobsize);
return type;
}
@@ -3327,6 +3341,8 @@
return PTR_ERR(type);
}
+ chip->select_chip(mtd, -1);
+
/* Check for a chip array */
for (i = 1; i < maxchips; i++) {
chip->select_chip(mtd, i);
@@ -3336,8 +3352,11 @@
chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
/* Read manufacturer and device IDs */
if (nand_maf_id != chip->read_byte(mtd) ||
- nand_dev_id != chip->read_byte(mtd))
+ nand_dev_id != chip->read_byte(mtd)) {
+ chip->select_chip(mtd, -1);
break;
+ }
+ chip->select_chip(mtd, -1);
}
if (i > 1)
pr_info("%d NAND chips detected\n", i);
@@ -3596,9 +3615,6 @@
/* Initialize state */
chip->state = FL_READY;
- /* De-select the device */
- chip->select_chip(mtd, -1);
-
/* Invalidate the pagebuffer reference */
chip->pagebuf = -1;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index c3c13e6..818b65c 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -42,6 +42,8 @@
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
/* Default simulator parameters values */
#if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE) || \
@@ -105,7 +107,6 @@
static char *weakpages = NULL;
static unsigned int bitflips = 0;
static char *gravepages = NULL;
-static unsigned int rptwear = 0;
static unsigned int overridesize = 0;
static char *cache_file = NULL;
static unsigned int bbt;
@@ -130,7 +131,6 @@
module_param(weakpages, charp, 0400);
module_param(bitflips, uint, 0400);
module_param(gravepages, charp, 0400);
-module_param(rptwear, uint, 0400);
module_param(overridesize, uint, 0400);
module_param(cache_file, charp, 0400);
module_param(bbt, uint, 0400);
@@ -162,7 +162,6 @@
MODULE_PARM_DESC(gravepages, "Pages that lose data [: maximum reads (defaults to 3)]"
" separated by commas e.g. 1401:2 means page 1401"
" can be read only twice before failing");
-MODULE_PARM_DESC(rptwear, "Number of erases between reporting wear, if not zero");
MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the ID bytes. "
"The size is specified in erase blocks and as the exponent of a power of two"
" e.g. 5 means a size of 32 erase blocks");
@@ -286,6 +285,11 @@
/* Maximum page cache pages needed to read or write a NAND page to the cache_file */
#define NS_MAX_HELD_PAGES 16
+struct nandsim_debug_info {
+ struct dentry *dfs_root;
+ struct dentry *dfs_wear_report;
+};
+
/*
* A union to represent flash memory contents and flash buffer.
*/
@@ -365,6 +369,8 @@
void *file_buf;
struct page *held_pages[NS_MAX_HELD_PAGES];
int held_cnt;
+
+ struct nandsim_debug_info dbg;
};
/*
@@ -442,11 +448,123 @@
static unsigned long *erase_block_wear = NULL;
static unsigned int wear_eb_count = 0;
static unsigned long total_wear = 0;
-static unsigned int rptwear_cnt = 0;
/* MTD structure for NAND controller */
static struct mtd_info *nsmtd;
+static int nandsim_debugfs_show(struct seq_file *m, void *private)
+{
+ unsigned long wmin = -1, wmax = 0, avg;
+ unsigned long deciles[10], decile_max[10], tot = 0;
+ unsigned int i;
+
+ /* Calc wear stats */
+ for (i = 0; i < wear_eb_count; ++i) {
+ unsigned long wear = erase_block_wear[i];
+ if (wear < wmin)
+ wmin = wear;
+ if (wear > wmax)
+ wmax = wear;
+ tot += wear;
+ }
+
+ for (i = 0; i < 9; ++i) {
+ deciles[i] = 0;
+ decile_max[i] = (wmax * (i + 1) + 5) / 10;
+ }
+ deciles[9] = 0;
+ decile_max[9] = wmax;
+ for (i = 0; i < wear_eb_count; ++i) {
+ int d;
+ unsigned long wear = erase_block_wear[i];
+ for (d = 0; d < 10; ++d)
+ if (wear <= decile_max[d]) {
+ deciles[d] += 1;
+ break;
+ }
+ }
+ avg = tot / wear_eb_count;
+
+ /* Output wear report */
+ seq_printf(m, "Total numbers of erases: %lu\n", tot);
+ seq_printf(m, "Number of erase blocks: %u\n", wear_eb_count);
+ seq_printf(m, "Average number of erases: %lu\n", avg);
+ seq_printf(m, "Maximum number of erases: %lu\n", wmax);
+ seq_printf(m, "Minimum number of erases: %lu\n", wmin);
+ for (i = 0; i < 10; ++i) {
+ unsigned long from = (i ? decile_max[i - 1] + 1 : 0);
+ if (from > decile_max[i])
+ continue;
+ seq_printf(m, "Number of ebs with erase counts from %lu to %lu : %lu\n",
+ from,
+ decile_max[i],
+ deciles[i]);
+ }
+
+ return 0;
+}
+
+static int nandsim_debugfs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, nandsim_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations dfs_fops = {
+ .open = nandsim_debugfs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/**
+ * nandsim_debugfs_create - initialize debugfs
+ * @dev: nandsim device description object
+ *
+ * This function creates all debugfs files for UBI device @ubi. Returns zero in
+ * case of success and a negative error code in case of failure.
+ */
+static int nandsim_debugfs_create(struct nandsim *dev)
+{
+ struct nandsim_debug_info *dbg = &dev->dbg;
+ struct dentry *dent;
+ int err;
+
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
+ return 0;
+
+ dent = debugfs_create_dir("nandsim", NULL);
+ if (IS_ERR_OR_NULL(dent)) {
+ int err = dent ? -ENODEV : PTR_ERR(dent);
+
+ NS_ERR("cannot create \"nandsim\" debugfs directory, err %d\n",
+ err);
+ return err;
+ }
+ dbg->dfs_root = dent;
+
+ dent = debugfs_create_file("wear_report", S_IRUSR,
+ dbg->dfs_root, dev, &dfs_fops);
+ if (IS_ERR_OR_NULL(dent))
+ goto out_remove;
+ dbg->dfs_wear_report = dent;
+
+ return 0;
+
+out_remove:
+ debugfs_remove_recursive(dbg->dfs_root);
+ err = dent ? PTR_ERR(dent) : -ENODEV;
+ return err;
+}
+
+/**
+ * nandsim_debugfs_remove - destroy all debugfs files
+ */
+static void nandsim_debugfs_remove(struct nandsim *ns)
+{
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ debugfs_remove_recursive(ns->dbg.dfs_root);
+}
+
/*
* Allocate array of page pointers, create slab allocation for an array
* and initialize the array by NULL pointers.
@@ -911,8 +1029,6 @@
{
size_t mem;
- if (!rptwear)
- return 0;
wear_eb_count = div_u64(mtd->size, mtd->erasesize);
mem = wear_eb_count * sizeof(unsigned long);
if (mem / sizeof(unsigned long) != wear_eb_count) {
@@ -929,64 +1045,18 @@
static void update_wear(unsigned int erase_block_no)
{
- unsigned long wmin = -1, wmax = 0, avg;
- unsigned long deciles[10], decile_max[10], tot = 0;
- unsigned int i;
-
if (!erase_block_wear)
return;
total_wear += 1;
+ /*
+ * TODO: Notify this through a debugfs entry,
+ * instead of showing an error message.
+ */
if (total_wear == 0)
NS_ERR("Erase counter total overflow\n");
erase_block_wear[erase_block_no] += 1;
if (erase_block_wear[erase_block_no] == 0)
NS_ERR("Erase counter overflow for erase block %u\n", erase_block_no);
- rptwear_cnt += 1;
- if (rptwear_cnt < rptwear)
- return;
- rptwear_cnt = 0;
- /* Calc wear stats */
- for (i = 0; i < wear_eb_count; ++i) {
- unsigned long wear = erase_block_wear[i];
- if (wear < wmin)
- wmin = wear;
- if (wear > wmax)
- wmax = wear;
- tot += wear;
- }
- for (i = 0; i < 9; ++i) {
- deciles[i] = 0;
- decile_max[i] = (wmax * (i + 1) + 5) / 10;
- }
- deciles[9] = 0;
- decile_max[9] = wmax;
- for (i = 0; i < wear_eb_count; ++i) {
- int d;
- unsigned long wear = erase_block_wear[i];
- for (d = 0; d < 10; ++d)
- if (wear <= decile_max[d]) {
- deciles[d] += 1;
- break;
- }
- }
- avg = tot / wear_eb_count;
- /* Output wear report */
- NS_INFO("*** Wear Report ***\n");
- NS_INFO("Total numbers of erases: %lu\n", tot);
- NS_INFO("Number of erase blocks: %u\n", wear_eb_count);
- NS_INFO("Average number of erases: %lu\n", avg);
- NS_INFO("Maximum number of erases: %lu\n", wmax);
- NS_INFO("Minimum number of erases: %lu\n", wmin);
- for (i = 0; i < 10; ++i) {
- unsigned long from = (i ? decile_max[i - 1] + 1 : 0);
- if (from > decile_max[i])
- continue;
- NS_INFO("Number of ebs with erase counts from %lu to %lu : %lu\n",
- from,
- decile_max[i],
- deciles[i]);
- }
- NS_INFO("*** End of Wear Report ***\n");
}
/*
@@ -2327,6 +2397,9 @@
if ((retval = setup_wear_reporting(nsmtd)) != 0)
goto err_exit;
+ if ((retval = nandsim_debugfs_create(nand)) != 0)
+ goto err_exit;
+
if ((retval = init_nandsim(nsmtd)) != 0)
goto err_exit;
@@ -2366,6 +2439,7 @@
struct nandsim *ns = ((struct nand_chip *)nsmtd->priv)->priv;
int i;
+ nandsim_debugfs_remove(ns);
free_nandsim(ns); /* Free nandsim private resources */
nand_release(nsmtd); /* Unregister driver */
for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i)
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 5fd3f01..8e148f14 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -197,7 +197,7 @@
return ret;
}
-static int __devinit ndfc_probe(struct platform_device *ofdev)
+static int ndfc_probe(struct platform_device *ofdev)
{
struct ndfc_controller *ndfc;
const __be32 *reg;
@@ -256,7 +256,7 @@
return 0;
}
-static int __devexit ndfc_remove(struct platform_device *ofdev)
+static int ndfc_remove(struct platform_device *ofdev)
{
struct ndfc_controller *ndfc = dev_get_drvdata(&ofdev->dev);
@@ -279,7 +279,7 @@
.of_match_table = ndfc_match,
},
.probe = ndfc_probe,
- .remove = __devexit_p(ndfc_remove),
+ .remove = ndfc_remove,
};
module_platform_driver(ndfc_driver);
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
deleted file mode 100644
index 9ee0c4e..0000000
--- a/drivers/mtd/nand/nomadik_nand.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * drivers/mtd/nand/nomadik_nand.c
- *
- * Overview:
- * Driver for on-board NAND flash on Nomadik Platforms
- *
- * Copyright © 2007 STMicroelectronics Pvt. Ltd.
- * Author: Sachin Verma <sachin.verma@st.com>
- *
- * Copyright © 2009 Alessandro Rubini
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/platform_data/mtd-nomadik-nand.h>
-#include <mach/fsmc.h>
-
-#include <mtd/mtd-abi.h>
-
-struct nomadik_nand_host {
- struct mtd_info mtd;
- struct nand_chip nand;
- void __iomem *data_va;
- void __iomem *cmd_va;
- void __iomem *addr_va;
- struct nand_bbt_descr *bbt_desc;
-};
-
-static struct nand_ecclayout nomadik_ecc_layout = {
- .eccbytes = 3 * 4,
- .eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */
- 0x02, 0x03, 0x04,
- 0x12, 0x13, 0x14,
- 0x22, 0x23, 0x24,
- 0x32, 0x33, 0x34},
- /* let's keep bytes 5,6,7 for us, just in case we change ECC algo */
- .oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} },
-};
-
-static void nomadik_ecc_control(struct mtd_info *mtd, int mode)
-{
- /* No need to enable hw ecc, it's on by default */
-}
-
-static void nomadik_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *nand = mtd->priv;
- struct nomadik_nand_host *host = nand->priv;
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- if (ctrl & NAND_CLE)
- writeb(cmd, host->cmd_va);
- else
- writeb(cmd, host->addr_va);
-}
-
-static int nomadik_nand_probe(struct platform_device *pdev)
-{
- struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
- struct nomadik_nand_host *host;
- struct mtd_info *mtd;
- struct nand_chip *nand;
- struct resource *res;
- int ret = 0;
-
- /* Allocate memory for the device structure (and zero it) */
- host = kzalloc(sizeof(struct nomadik_nand_host), GFP_KERNEL);
- if (!host) {
- dev_err(&pdev->dev, "Failed to allocate device structure.\n");
- return -ENOMEM;
- }
-
- /* Call the client's init function, if any */
- if (pdata->init)
- ret = pdata->init();
- if (ret < 0) {
- dev_err(&pdev->dev, "Init function failed\n");
- goto err;
- }
-
- /* ioremap three regions */
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
- if (!res) {
- ret = -EIO;
- goto err_unmap;
- }
- host->addr_va = ioremap(res->start, resource_size(res));
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
- if (!res) {
- ret = -EIO;
- goto err_unmap;
- }
- host->data_va = ioremap(res->start, resource_size(res));
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
- if (!res) {
- ret = -EIO;
- goto err_unmap;
- }
- host->cmd_va = ioremap(res->start, resource_size(res));
-
- if (!host->addr_va || !host->data_va || !host->cmd_va) {
- ret = -ENOMEM;
- goto err_unmap;
- }
-
- /* Link all private pointers */
- mtd = &host->mtd;
- nand = &host->nand;
- mtd->priv = nand;
- nand->priv = host;
-
- host->mtd.owner = THIS_MODULE;
- nand->IO_ADDR_R = host->data_va;
- nand->IO_ADDR_W = host->data_va;
- nand->cmd_ctrl = nomadik_cmd_ctrl;
-
- /*
- * This stanza declares ECC_HW but uses soft routines. It's because
- * HW claims to make the calculation but not the correction. However,
- * I haven't managed to get the desired data out of it until now.
- */
- nand->ecc.mode = NAND_ECC_SOFT;
- nand->ecc.layout = &nomadik_ecc_layout;
- nand->ecc.hwctl = nomadik_ecc_control;
- nand->ecc.size = 512;
- nand->ecc.bytes = 3;
-
- nand->options = pdata->options;
-
- /*
- * Scan to find existence of the device
- */
- if (nand_scan(&host->mtd, 1)) {
- ret = -ENXIO;
- goto err_unmap;
- }
-
- mtd_device_register(&host->mtd, pdata->parts, pdata->nparts);
-
- platform_set_drvdata(pdev, host);
- return 0;
-
- err_unmap:
- if (host->cmd_va)
- iounmap(host->cmd_va);
- if (host->data_va)
- iounmap(host->data_va);
- if (host->addr_va)
- iounmap(host->addr_va);
- err:
- kfree(host);
- return ret;
-}
-
-/*
- * Clean up routine
- */
-static int nomadik_nand_remove(struct platform_device *pdev)
-{
- struct nomadik_nand_host *host = platform_get_drvdata(pdev);
- struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
-
- if (pdata->exit)
- pdata->exit();
-
- if (host) {
- nand_release(&host->mtd);
- iounmap(host->cmd_va);
- iounmap(host->data_va);
- iounmap(host->addr_va);
- kfree(host);
- }
- return 0;
-}
-
-static int nomadik_nand_suspend(struct device *dev)
-{
- struct nomadik_nand_host *host = dev_get_drvdata(dev);
- int ret = 0;
- if (host)
- ret = mtd_suspend(&host->mtd);
- return ret;
-}
-
-static int nomadik_nand_resume(struct device *dev)
-{
- struct nomadik_nand_host *host = dev_get_drvdata(dev);
- if (host)
- mtd_resume(&host->mtd);
- return 0;
-}
-
-static const struct dev_pm_ops nomadik_nand_pm_ops = {
- .suspend = nomadik_nand_suspend,
- .resume = nomadik_nand_resume,
-};
-
-static struct platform_driver nomadik_nand_driver = {
- .probe = nomadik_nand_probe,
- .remove = nomadik_nand_remove,
- .driver = {
- .owner = THIS_MODULE,
- .name = "nomadik_nand",
- .pm = &nomadik_nand_pm_ops,
- },
-};
-
-module_platform_driver(nomadik_nand_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("ST Microelectronics (sachin.verma@st.com)");
-MODULE_DESCRIPTION("NAND driver for Nomadik Platform");
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
index 94dc46b..a619119 100644
--- a/drivers/mtd/nand/nuc900_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -246,7 +246,7 @@
spin_unlock(&nand->lock);
}
-static int __devinit nuc900_nand_probe(struct platform_device *pdev)
+static int nuc900_nand_probe(struct platform_device *pdev)
{
struct nuc900_nand *nuc900_nand;
struct nand_chip *chip;
@@ -317,7 +317,7 @@
return retval;
}
-static int __devexit nuc900_nand_remove(struct platform_device *pdev)
+static int nuc900_nand_remove(struct platform_device *pdev)
{
struct nuc900_nand *nuc900_nand = platform_get_drvdata(pdev);
struct resource *res;
@@ -340,7 +340,7 @@
static struct platform_driver nuc900_nand_driver = {
.probe = nuc900_nand_probe,
- .remove = __devexit_p(nuc900_nand_remove),
+ .remove = nuc900_nand_remove,
.driver = {
.name = "nuc900-fmi",
.owner = THIS_MODULE,
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 1f34ba1..0002d5e 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1323,7 +1323,7 @@
}
#endif /* CONFIG_MTD_NAND_OMAP_BCH */
-static int __devinit omap_nand_probe(struct platform_device *pdev)
+static int omap_nand_probe(struct platform_device *pdev)
{
struct omap_nand_info *info;
struct omap_nand_platform_data *pdata;
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index aefaf8c..cd72b92 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -194,7 +194,7 @@
return ret;
}
-static int __devexit orion_nand_remove(struct platform_device *pdev)
+static int orion_nand_remove(struct platform_device *pdev)
{
struct mtd_info *mtd = platform_get_drvdata(pdev);
struct nand_chip *nc = mtd->priv;
@@ -223,7 +223,7 @@
#endif
static struct platform_driver orion_nand_driver = {
- .remove = __devexit_p(orion_nand_remove),
+ .remove = orion_nand_remove,
.driver = {
.name = "orion_nand",
.owner = THIS_MODULE,
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 1440e51..5a67082 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -89,7 +89,7 @@
return !!(inl(lpcctl) & LBICTRL_LPCCTL_NR);
}
-static int __devinit pasemi_nand_probe(struct platform_device *ofdev)
+static int pasemi_nand_probe(struct platform_device *ofdev)
{
struct pci_dev *pdev;
struct device_node *np = ofdev->dev.of_node;
@@ -184,7 +184,7 @@
return err;
}
-static int __devexit pasemi_nand_remove(struct platform_device *ofdev)
+static int pasemi_nand_remove(struct platform_device *ofdev)
{
struct nand_chip *chip;
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index a47ee68..c004566 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -28,7 +28,7 @@
/*
* Probe for the NAND device.
*/
-static int __devinit plat_nand_probe(struct platform_device *pdev)
+static int plat_nand_probe(struct platform_device *pdev)
{
struct platform_nand_data *pdata = pdev->dev.platform_data;
struct mtd_part_parser_data ppdata;
@@ -134,7 +134,7 @@
/*
* Remove a NAND device.
*/
-static int __devexit plat_nand_remove(struct platform_device *pdev)
+static int plat_nand_remove(struct platform_device *pdev)
{
struct plat_nand_data *data = platform_get_drvdata(pdev);
struct platform_nand_data *pdata = pdev->dev.platform_data;
@@ -160,7 +160,7 @@
static struct platform_driver plat_nand_driver = {
.probe = plat_nand_probe,
- .remove = __devexit_p(plat_nand_remove),
+ .remove = plat_nand_remove,
.driver = {
.name = "gen_nand",
.owner = THIS_MODULE,
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 79ded48..df954b4 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -730,11 +730,14 @@
struct s3c2410_nand_mtd *mtd,
struct s3c2410_nand_set *set)
{
- if (set)
+ if (set) {
mtd->mtd.name = set->name;
- return mtd_device_parse_register(&mtd->mtd, NULL, NULL,
+ return mtd_device_parse_register(&mtd->mtd, NULL, NULL,
set->partitions, set->nr_partitions);
+ }
+
+ return -ENODEV;
}
/**
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index f48ac5d..57b3971 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -23,11 +23,18 @@
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/completion.h>
#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mtd.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/sh_dma.h>
#include <linux/slab.h>
#include <linux/string.h>
@@ -106,6 +113,84 @@
writeb(0x0, FLTRCR(flctl));
}
+static void flctl_dma_complete(void *param)
+{
+ struct sh_flctl *flctl = param;
+
+ complete(&flctl->dma_complete);
+}
+
+static void flctl_release_dma(struct sh_flctl *flctl)
+{
+ if (flctl->chan_fifo0_rx) {
+ dma_release_channel(flctl->chan_fifo0_rx);
+ flctl->chan_fifo0_rx = NULL;
+ }
+ if (flctl->chan_fifo0_tx) {
+ dma_release_channel(flctl->chan_fifo0_tx);
+ flctl->chan_fifo0_tx = NULL;
+ }
+}
+
+static void flctl_setup_dma(struct sh_flctl *flctl)
+{
+ dma_cap_mask_t mask;
+ struct dma_slave_config cfg;
+ struct platform_device *pdev = flctl->pdev;
+ struct sh_flctl_platform_data *pdata = pdev->dev.platform_data;
+ int ret;
+
+ if (!pdata)
+ return;
+
+ if (pdata->slave_id_fifo0_tx <= 0 || pdata->slave_id_fifo0_rx <= 0)
+ return;
+
+ /* We can only either use DMA for both Tx and Rx or not use it at all */
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ flctl->chan_fifo0_tx = dma_request_channel(mask, shdma_chan_filter,
+ (void *)pdata->slave_id_fifo0_tx);
+ dev_dbg(&pdev->dev, "%s: TX: got channel %p\n", __func__,
+ flctl->chan_fifo0_tx);
+
+ if (!flctl->chan_fifo0_tx)
+ return;
+
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.slave_id = pdata->slave_id_fifo0_tx;
+ cfg.direction = DMA_MEM_TO_DEV;
+ cfg.dst_addr = (dma_addr_t)FLDTFIFO(flctl);
+ cfg.src_addr = 0;
+ ret = dmaengine_slave_config(flctl->chan_fifo0_tx, &cfg);
+ if (ret < 0)
+ goto err;
+
+ flctl->chan_fifo0_rx = dma_request_channel(mask, shdma_chan_filter,
+ (void *)pdata->slave_id_fifo0_rx);
+ dev_dbg(&pdev->dev, "%s: RX: got channel %p\n", __func__,
+ flctl->chan_fifo0_rx);
+
+ if (!flctl->chan_fifo0_rx)
+ goto err;
+
+ cfg.slave_id = pdata->slave_id_fifo0_rx;
+ cfg.direction = DMA_DEV_TO_MEM;
+ cfg.dst_addr = 0;
+ cfg.src_addr = (dma_addr_t)FLDTFIFO(flctl);
+ ret = dmaengine_slave_config(flctl->chan_fifo0_rx, &cfg);
+ if (ret < 0)
+ goto err;
+
+ init_completion(&flctl->dma_complete);
+
+ return;
+
+err:
+ flctl_release_dma(flctl);
+}
+
static void set_addr(struct mtd_info *mtd, int column, int page_addr)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
@@ -225,7 +310,7 @@
for (i = 0; i < 3; i++) {
uint8_t org;
- int index;
+ unsigned int index;
data = readl(ecc_reg[i]);
@@ -261,6 +346,70 @@
timeout_error(flctl, __func__);
}
+static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
+ int len, enum dma_data_direction dir)
+{
+ struct dma_async_tx_descriptor *desc = NULL;
+ struct dma_chan *chan;
+ enum dma_transfer_direction tr_dir;
+ dma_addr_t dma_addr;
+ dma_cookie_t cookie = -EINVAL;
+ uint32_t reg;
+ int ret;
+
+ if (dir == DMA_FROM_DEVICE) {
+ chan = flctl->chan_fifo0_rx;
+ tr_dir = DMA_DEV_TO_MEM;
+ } else {
+ chan = flctl->chan_fifo0_tx;
+ tr_dir = DMA_MEM_TO_DEV;
+ }
+
+ dma_addr = dma_map_single(chan->device->dev, buf, len, dir);
+
+ if (dma_addr)
+ desc = dmaengine_prep_slave_single(chan, dma_addr, len,
+ tr_dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+
+ if (desc) {
+ reg = readl(FLINTDMACR(flctl));
+ reg |= DREQ0EN;
+ writel(reg, FLINTDMACR(flctl));
+
+ desc->callback = flctl_dma_complete;
+ desc->callback_param = flctl;
+ cookie = dmaengine_submit(desc);
+
+ dma_async_issue_pending(chan);
+ } else {
+ /* DMA failed, fall back to PIO */
+ flctl_release_dma(flctl);
+ dev_warn(&flctl->pdev->dev,
+ "DMA failed, falling back to PIO\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ ret =
+ wait_for_completion_timeout(&flctl->dma_complete,
+ msecs_to_jiffies(3000));
+
+ if (ret <= 0) {
+ chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+ dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n");
+ }
+
+out:
+ reg = readl(FLINTDMACR(flctl));
+ reg &= ~DREQ0EN;
+ writel(reg, FLINTDMACR(flctl));
+
+ dma_unmap_single(chan->device->dev, dma_addr, len, dir);
+
+ /* ret > 0 is success */
+ return ret;
+}
+
static void read_datareg(struct sh_flctl *flctl, int offset)
{
unsigned long data;
@@ -279,11 +428,20 @@
len_4align = (rlen + 3) / 4;
+ /* initiate DMA transfer */
+ if (flctl->chan_fifo0_rx && rlen >= 32 &&
+ flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_DEV_TO_MEM) > 0)
+ goto convert; /* DMA success */
+
+ /* do polling transfer */
for (i = 0; i < len_4align; i++) {
wait_rfifo_ready(flctl);
buf[i] = readl(FLDTFIFO(flctl));
- buf[i] = be32_to_cpu(buf[i]);
}
+
+convert:
+ for (i = 0; i < len_4align; i++)
+ buf[i] = be32_to_cpu(buf[i]);
}
static enum flctl_ecc_res_t read_ecfiforeg
@@ -305,28 +463,39 @@
return res;
}
-static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
+static void write_fiforeg(struct sh_flctl *flctl, int rlen,
+ unsigned int offset)
{
int i, len_4align;
- unsigned long *data = (unsigned long *)&flctl->done_buff[offset];
- void *fifo_addr = (void *)FLDTFIFO(flctl);
+ unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
len_4align = (rlen + 3) / 4;
for (i = 0; i < len_4align; i++) {
wait_wfifo_ready(flctl);
- writel(cpu_to_be32(data[i]), fifo_addr);
+ writel(cpu_to_be32(buf[i]), FLDTFIFO(flctl));
}
}
-static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
+static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
+ unsigned int offset)
{
int i, len_4align;
- unsigned long *data = (unsigned long *)&flctl->done_buff[offset];
+ unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
len_4align = (rlen + 3) / 4;
+
+ for (i = 0; i < len_4align; i++)
+ buf[i] = cpu_to_be32(buf[i]);
+
+ /* initiate DMA transfer */
+ if (flctl->chan_fifo0_tx && rlen >= 32 &&
+ flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_MEM_TO_DEV) > 0)
+ return; /* DMA success */
+
+ /* do polling transfer */
for (i = 0; i < len_4align; i++) {
wait_wecfifo_ready(flctl);
- writel(cpu_to_be32(data[i]), FLECFIFO(flctl));
+ writel(buf[i], FLECFIFO(flctl));
}
}
@@ -750,41 +919,35 @@
static void flctl_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int index = flctl->index;
- memcpy(&flctl->done_buff[index], buf, len);
+ memcpy(&flctl->done_buff[flctl->index], buf, len);
flctl->index += len;
}
static uint8_t flctl_read_byte(struct mtd_info *mtd)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int index = flctl->index;
uint8_t data;
- data = flctl->done_buff[index];
+ data = flctl->done_buff[flctl->index];
flctl->index++;
return data;
}
static uint16_t flctl_read_word(struct mtd_info *mtd)
{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int index = flctl->index;
- uint16_t data;
- uint16_t *buf = (uint16_t *)&flctl->done_buff[index];
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ uint16_t *buf = (uint16_t *)&flctl->done_buff[flctl->index];
- data = *buf;
- flctl->index += 2;
- return data;
+ flctl->index += 2;
+ return *buf;
}
static void flctl_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int index = flctl->index;
- memcpy(buf, &flctl->done_buff[index], len);
+ memcpy(buf, &flctl->done_buff[flctl->index], len);
flctl->index += len;
}
@@ -858,7 +1021,74 @@
return IRQ_HANDLED;
}
-static int __devinit flctl_probe(struct platform_device *pdev)
+#ifdef CONFIG_OF
+struct flctl_soc_config {
+ unsigned long flcmncr_val;
+ unsigned has_hwecc:1;
+ unsigned use_holden:1;
+};
+
+static struct flctl_soc_config flctl_sh7372_config = {
+ .flcmncr_val = CLK_16B_12L_4H | TYPESEL_SET | SHBUSSEL,
+ .has_hwecc = 1,
+ .use_holden = 1,
+};
+
+static const struct of_device_id of_flctl_match[] = {
+ { .compatible = "renesas,shmobile-flctl-sh7372",
+ .data = &flctl_sh7372_config },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_flctl_match);
+
+static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
+{
+ const struct of_device_id *match;
+ struct flctl_soc_config *config;
+ struct sh_flctl_platform_data *pdata;
+ struct device_node *dn = dev->of_node;
+ int ret;
+
+ match = of_match_device(of_flctl_match, dev);
+ if (match)
+ config = (struct flctl_soc_config *)match->data;
+ else {
+ dev_err(dev, "%s: no OF configuration attached\n", __func__);
+ return NULL;
+ }
+
+ pdata = devm_kzalloc(dev, sizeof(struct sh_flctl_platform_data),
+ GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "%s: failed to allocate config data\n", __func__);
+ return NULL;
+ }
+
+ /* set SoC specific options */
+ pdata->flcmncr_val = config->flcmncr_val;
+ pdata->has_hwecc = config->has_hwecc;
+ pdata->use_holden = config->use_holden;
+
+ /* parse user defined options */
+ ret = of_get_nand_bus_width(dn);
+ if (ret == 16)
+ pdata->flcmncr_val |= SEL_16BIT;
+ else if (ret != 8) {
+ dev_err(dev, "%s: invalid bus width\n", __func__);
+ return NULL;
+ }
+
+ return pdata;
+}
+#else /* CONFIG_OF */
+#define of_flctl_match NULL
+static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
+{
+ return NULL;
+}
+#endif /* CONFIG_OF */
+
+static int flctl_probe(struct platform_device *pdev)
{
struct resource *res;
struct sh_flctl *flctl;
@@ -867,12 +1097,7 @@
struct sh_flctl_platform_data *pdata;
int ret = -ENXIO;
int irq;
-
- pdata = pdev->dev.platform_data;
- if (pdata == NULL) {
- dev_err(&pdev->dev, "no platform data defined\n");
- return -EINVAL;
- }
+ struct mtd_part_parser_data ppdata = {};
flctl = kzalloc(sizeof(struct sh_flctl), GFP_KERNEL);
if (!flctl) {
@@ -904,6 +1129,17 @@
goto err_flste;
}
+ if (pdev->dev.of_node)
+ pdata = flctl_parse_dt(&pdev->dev);
+ else
+ pdata = pdev->dev.platform_data;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "no setup data defined\n");
+ ret = -EINVAL;
+ goto err_pdata;
+ }
+
platform_set_drvdata(pdev, flctl);
flctl_mtd = &flctl->mtd;
nand = &flctl->chip;
@@ -932,6 +1168,8 @@
pm_runtime_enable(&pdev->dev);
pm_runtime_resume(&pdev->dev);
+ flctl_setup_dma(flctl);
+
ret = nand_scan_ident(flctl_mtd, 1, NULL);
if (ret)
goto err_chip;
@@ -944,12 +1182,16 @@
if (ret)
goto err_chip;
- mtd_device_register(flctl_mtd, pdata->parts, pdata->nr_parts);
+ ppdata.of_node = pdev->dev.of_node;
+ ret = mtd_device_parse_register(flctl_mtd, NULL, &ppdata, pdata->parts,
+ pdata->nr_parts);
return 0;
err_chip:
+ flctl_release_dma(flctl);
pm_runtime_disable(&pdev->dev);
+err_pdata:
free_irq(irq, flctl);
err_flste:
iounmap(flctl->reg);
@@ -958,10 +1200,11 @@
return ret;
}
-static int __devexit flctl_remove(struct platform_device *pdev)
+static int flctl_remove(struct platform_device *pdev)
{
struct sh_flctl *flctl = platform_get_drvdata(pdev);
+ flctl_release_dma(flctl);
nand_release(&flctl->mtd);
pm_runtime_disable(&pdev->dev);
free_irq(platform_get_irq(pdev, 0), flctl);
@@ -976,6 +1219,7 @@
.driver = {
.name = "sh_flctl",
.owner = THIS_MODULE,
+ .of_match_table = of_flctl_match,
},
};
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 3421e37..127bc42 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -106,7 +106,7 @@
/*
* Main initialization routine
*/
-static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
+static int sharpsl_nand_probe(struct platform_device *pdev)
{
struct nand_chip *this;
struct resource *r;
@@ -205,7 +205,7 @@
/*
* Clean up routine
*/
-static int __devexit sharpsl_nand_remove(struct platform_device *pdev)
+static int sharpsl_nand_remove(struct platform_device *pdev)
{
struct sharpsl_nand *sharpsl = platform_get_drvdata(pdev);
@@ -228,7 +228,7 @@
.owner = THIS_MODULE,
},
.probe = sharpsl_nand_probe,
- .remove = __devexit_p(sharpsl_nand_remove),
+ .remove = sharpsl_nand_remove,
};
module_platform_driver(sharpsl_nand_driver);
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index f3f28fa..09dde7d 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -140,7 +140,7 @@
/*
* Probe for the NAND device.
*/
-static int __devinit socrates_nand_probe(struct platform_device *ofdev)
+static int socrates_nand_probe(struct platform_device *ofdev)
{
struct socrates_nand_host *host;
struct mtd_info *mtd;
@@ -220,7 +220,7 @@
/*
* Remove a NAND device.
*/
-static int __devexit socrates_nand_remove(struct platform_device *ofdev)
+static int socrates_nand_remove(struct platform_device *ofdev)
{
struct socrates_nand_host *host = dev_get_drvdata(&ofdev->dev);
struct mtd_info *mtd = &host->mtd;
@@ -251,7 +251,7 @@
.of_match_table = socrates_nand_match,
},
.probe = socrates_nand_probe,
- .remove = __devexit_p(socrates_nand_remove),
+ .remove = socrates_nand_remove,
};
module_platform_driver(socrates_nand_driver);
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index d9127e2..dbd3aa5 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -71,7 +71,10 @@
(*pparts)[i].name = (char *)partname;
if (of_get_property(pp, "read-only", &len))
- (*pparts)[i].mask_flags = MTD_WRITEABLE;
+ (*pparts)[i].mask_flags |= MTD_WRITEABLE;
+
+ if (of_get_property(pp, "lock", &len))
+ (*pparts)[i].mask_flags |= MTD_POWERUP_LOCK;
i++;
}
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index 1c4f97c..9f11562 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -35,7 +35,7 @@
struct onenand_chip onenand;
};
-static int __devinit generic_onenand_probe(struct platform_device *pdev)
+static int generic_onenand_probe(struct platform_device *pdev)
{
struct onenand_info *info;
struct onenand_platform_data *pdata = pdev->dev.platform_data;
@@ -88,7 +88,7 @@
return err;
}
-static int __devexit generic_onenand_remove(struct platform_device *pdev)
+static int generic_onenand_remove(struct platform_device *pdev)
{
struct onenand_info *info = platform_get_drvdata(pdev);
struct resource *res = pdev->resource;
@@ -112,7 +112,7 @@
.owner = THIS_MODULE,
},
.probe = generic_onenand_probe,
- .remove = __devexit_p(generic_onenand_remove),
+ .remove = generic_onenand_remove,
};
module_platform_driver(generic_onenand_driver);
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 00cd3da..065f3fe 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -630,7 +630,7 @@
return ret;
}
-static int __devinit omap2_onenand_probe(struct platform_device *pdev)
+static int omap2_onenand_probe(struct platform_device *pdev)
{
struct omap_onenand_platform_data *pdata;
struct omap2_onenand *c;
@@ -799,7 +799,7 @@
return r;
}
-static int __devexit omap2_onenand_remove(struct platform_device *pdev)
+static int omap2_onenand_remove(struct platform_device *pdev)
{
struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
@@ -822,7 +822,7 @@
static struct platform_driver omap2_onenand_driver = {
.probe = omap2_onenand_probe,
- .remove = __devexit_p(omap2_onenand_remove),
+ .remove = omap2_onenand_remove,
.shutdown = omap2_onenand_shutdown,
.driver = {
.name = DRIVER_NAME,
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index 8e4b3f2..33f2a8f 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -1053,7 +1053,7 @@
return err;
}
-static int __devexit s3c_onenand_remove(struct platform_device *pdev)
+static int s3c_onenand_remove(struct platform_device *pdev)
{
struct mtd_info *mtd = platform_get_drvdata(pdev);
@@ -1130,7 +1130,7 @@
},
.id_table = s3c_onenand_driver_ids,
.probe = s3c_onenand_probe,
- .remove = __devexit_p(s3c_onenand_remove),
+ .remove = s3c_onenand_remove,
};
module_platform_driver(s3c_onenand_driver);
diff --git a/drivers/mtd/tests/mtd_nandbiterrs.c b/drivers/mtd/tests/mtd_nandbiterrs.c
index cc8d62c..207bf9a 100644
--- a/drivers/mtd/tests/mtd_nandbiterrs.c
+++ b/drivers/mtd/tests/mtd_nandbiterrs.c
@@ -39,6 +39,9 @@
* this program; see the file COPYING. If not, write to the Free Software
* Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -47,8 +50,6 @@
#include <linux/mtd/nand.h>
#include <linux/slab.h>
-#define msg(FMT, VA...) pr_info("mtd_nandbiterrs: "FMT, ##VA)
-
static int dev;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -103,7 +104,7 @@
struct erase_info ei;
loff_t addr = eraseblock * mtd->erasesize;
- msg("erase_block\n");
+ pr_info("erase_block\n");
memset(&ei, 0, sizeof(struct erase_info));
ei.mtd = mtd;
@@ -112,7 +113,7 @@
err = mtd_erase(mtd, &ei);
if (err || ei.state == MTD_ERASE_FAILED) {
- msg("error %d while erasing\n", err);
+ pr_err("error %d while erasing\n", err);
if (!err)
err = -EIO;
return err;
@@ -128,11 +129,11 @@
size_t written;
if (log)
- msg("write_page\n");
+ pr_info("write_page\n");
err = mtd_write(mtd, offset, mtd->writesize, &written, wbuffer);
if (err || written != mtd->writesize) {
- msg("error: write failed at %#llx\n", (long long)offset);
+ pr_err("error: write failed at %#llx\n", (long long)offset);
if (!err)
err = -EIO;
}
@@ -147,7 +148,7 @@
struct mtd_oob_ops ops;
if (log)
- msg("rewrite page\n");
+ pr_info("rewrite page\n");
ops.mode = MTD_OPS_RAW; /* No ECC */
ops.len = mtd->writesize;
@@ -160,7 +161,7 @@
err = mtd_write_oob(mtd, offset, &ops);
if (err || ops.retlen != mtd->writesize) {
- msg("error: write_oob failed (%d)\n", err);
+ pr_err("error: write_oob failed (%d)\n", err);
if (!err)
err = -EIO;
}
@@ -177,7 +178,7 @@
struct mtd_ecc_stats oldstats;
if (log)
- msg("read_page\n");
+ pr_info("read_page\n");
/* Saving last mtd stats */
memcpy(&oldstats, &mtd->ecc_stats, sizeof(oldstats));
@@ -187,7 +188,7 @@
err = mtd->ecc_stats.corrected - oldstats.corrected;
if (err < 0 || read != mtd->writesize) {
- msg("error: read failed at %#llx\n", (long long)offset);
+ pr_err("error: read failed at %#llx\n", (long long)offset);
if (err >= 0)
err = -EIO;
}
@@ -201,11 +202,11 @@
unsigned i, errs = 0;
if (log)
- msg("verify_page\n");
+ pr_info("verify_page\n");
for (i = 0; i < mtd->writesize; i++) {
if (rbuffer[i] != hash(i+seed)) {
- msg("Error: page offset %u, expected %02x, got %02x\n",
+ pr_err("Error: page offset %u, expected %02x, got %02x\n",
i, hash(i+seed), rbuffer[i]);
errs++;
}
@@ -230,13 +231,13 @@
for (bit = 7; bit >= 0; bit--) {
if (CBIT(wbuffer[byte], bit)) {
BCLR(wbuffer[byte], bit);
- msg("Inserted biterror @ %u/%u\n", byte, bit);
+ pr_info("Inserted biterror @ %u/%u\n", byte, bit);
return 0;
}
}
byte++;
}
- msg("biterror: Failed to find a '1' bit\n");
+ pr_err("biterror: Failed to find a '1' bit\n");
return -EIO;
}
@@ -248,7 +249,7 @@
unsigned i;
unsigned errs_per_subpage = 0;
- msg("incremental biterrors test\n");
+ pr_info("incremental biterrors test\n");
for (i = 0; i < mtd->writesize; i++)
wbuffer[i] = hash(i+seed);
@@ -265,9 +266,9 @@
err = read_page(1);
if (err > 0)
- msg("Read reported %d corrected bit errors\n", err);
+ pr_info("Read reported %d corrected bit errors\n", err);
if (err < 0) {
- msg("After %d biterrors per subpage, read reported error %d\n",
+ pr_err("After %d biterrors per subpage, read reported error %d\n",
errs_per_subpage, err);
err = 0;
goto exit;
@@ -275,11 +276,11 @@
err = verify_page(1);
if (err) {
- msg("ECC failure, read data is incorrect despite read success\n");
+ pr_err("ECC failure, read data is incorrect despite read success\n");
goto exit;
}
- msg("Successfully corrected %d bit errors per subpage\n",
+ pr_info("Successfully corrected %d bit errors per subpage\n",
errs_per_subpage);
for (i = 0; i < subcount; i++) {
@@ -311,7 +312,7 @@
memset(bitstats, 0, sizeof(bitstats));
- msg("overwrite biterrors test\n");
+ pr_info("overwrite biterrors test\n");
for (i = 0; i < mtd->writesize; i++)
wbuffer[i] = hash(i+seed);
@@ -329,18 +330,18 @@
err = read_page(0);
if (err >= 0) {
if (err >= MAXBITS) {
- msg("Implausible number of bit errors corrected\n");
+ pr_info("Implausible number of bit errors corrected\n");
err = -EIO;
break;
}
bitstats[err]++;
if (err > max_corrected) {
max_corrected = err;
- msg("Read reported %d corrected bit errors\n",
+ pr_info("Read reported %d corrected bit errors\n",
err);
}
} else { /* err < 0 */
- msg("Read reported error %d\n", err);
+ pr_info("Read reported error %d\n", err);
err = 0;
break;
}
@@ -348,7 +349,7 @@
err = verify_page(0);
if (err) {
bitstats[max_corrected] = opno;
- msg("ECC failure, read data is incorrect despite read success\n");
+ pr_info("ECC failure, read data is incorrect despite read success\n");
break;
}
@@ -357,9 +358,9 @@
/* At this point bitstats[0] contains the number of ops with no bit
* errors, bitstats[1] the number of ops with 1 bit error, etc. */
- msg("Bit error histogram (%d operations total):\n", opno);
+ pr_info("Bit error histogram (%d operations total):\n", opno);
for (i = 0; i < max_corrected; i++)
- msg("Page reads with %3d corrected bit errors: %d\n",
+ pr_info("Page reads with %3d corrected bit errors: %d\n",
i, bitstats[i]);
exit:
@@ -370,36 +371,36 @@
{
int err = 0;
- msg("\n");
- msg("==================================================\n");
- msg("MTD device: %d\n", dev);
+ printk("\n");
+ printk(KERN_INFO "==================================================\n");
+ pr_info("MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
- msg("error: cannot get MTD device\n");
+ pr_err("error: cannot get MTD device\n");
goto exit_mtddev;
}
if (mtd->type != MTD_NANDFLASH) {
- msg("this test requires NAND flash\n");
+ pr_info("this test requires NAND flash\n");
err = -ENODEV;
goto exit_nand;
}
- msg("MTD device size %llu, eraseblock=%u, page=%u, oob=%u\n",
+ pr_info("MTD device size %llu, eraseblock=%u, page=%u, oob=%u\n",
(unsigned long long)mtd->size, mtd->erasesize,
mtd->writesize, mtd->oobsize);
subsize = mtd->writesize >> mtd->subpage_sft;
subcount = mtd->writesize / subsize;
- msg("Device uses %d subpages of %d bytes\n", subcount, subsize);
+ pr_info("Device uses %d subpages of %d bytes\n", subcount, subsize);
offset = page_offset * mtd->writesize;
eraseblock = mtd_div_by_eb(offset, mtd);
- msg("Using page=%u, offset=%llu, eraseblock=%u\n",
+ pr_info("Using page=%u, offset=%llu, eraseblock=%u\n",
page_offset, offset, eraseblock);
wbuffer = kmalloc(mtd->writesize, GFP_KERNEL);
@@ -432,8 +433,8 @@
goto exit_error;
err = -EIO;
- msg("finished successfully.\n");
- msg("==================================================\n");
+ pr_info("finished successfully.\n");
+ printk(KERN_INFO "==================================================\n");
exit_error:
kfree(rbuffer);
diff --git a/drivers/mtd/tests/mtd_nandecctest.c b/drivers/mtd/tests/mtd_nandecctest.c
index b437fa4..1eee264 100644
--- a/drivers/mtd/tests/mtd_nandecctest.c
+++ b/drivers/mtd/tests/mtd_nandecctest.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/list.h>
@@ -264,13 +266,13 @@
correct_data, size);
if (err) {
- pr_err("mtd_nandecctest: not ok - %s-%zd\n",
+ pr_err("not ok - %s-%zd\n",
nand_ecc_test[i].name, size);
dump_data_ecc(error_data, error_ecc,
correct_data, correct_ecc, size);
break;
}
- pr_info("mtd_nandecctest: ok - %s-%zd\n",
+ pr_info("ok - %s-%zd\n",
nand_ecc_test[i].name, size);
}
error:
diff --git a/drivers/mtd/tests/mtd_oobtest.c b/drivers/mtd/tests/mtd_oobtest.c
index ed9b628..e827fa8 100644
--- a/drivers/mtd/tests/mtd_oobtest.c
+++ b/drivers/mtd/tests/mtd_oobtest.c
@@ -19,6 +19,8 @@
* Author: Adrian Hunter <ext-adrian.hunter@nokia.com>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <asm/div64.h>
#include <linux/init.h>
#include <linux/module.h>
@@ -28,8 +30,6 @@
#include <linux/slab.h>
#include <linux/sched.h>
-#define PRINT_PREF KERN_INFO "mtd_oobtest: "
-
static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -80,13 +80,12 @@
err = mtd_erase(mtd, &ei);
if (err) {
- printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum);
+ pr_err("error %d while erasing EB %d\n", err, ebnum);
return err;
}
if (ei.state == MTD_ERASE_FAILED) {
- printk(PRINT_PREF "some erase error occurred at EB %d\n",
- ebnum);
+ pr_err("some erase error occurred at EB %d\n", ebnum);
return -EIO;
}
@@ -98,7 +97,7 @@
int err;
unsigned int i;
- printk(PRINT_PREF "erasing whole device\n");
+ pr_info("erasing whole device\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
@@ -107,7 +106,7 @@
return err;
cond_resched();
}
- printk(PRINT_PREF "erased %u eraseblocks\n", i);
+ pr_info("erased %u eraseblocks\n", i);
return 0;
}
@@ -141,9 +140,9 @@
ops.oobbuf = writebuf;
err = mtd_write_oob(mtd, addr, &ops);
if (err || ops.oobretlen != use_len) {
- printk(PRINT_PREF "error: writeoob failed at %#llx\n",
+ pr_err("error: writeoob failed at %#llx\n",
(long long)addr);
- printk(PRINT_PREF "error: use_len %d, use_offset %d\n",
+ pr_err("error: use_len %d, use_offset %d\n",
use_len, use_offset);
errcnt += 1;
return err ? err : -1;
@@ -160,7 +159,7 @@
int err;
unsigned int i;
- printk(PRINT_PREF "writing OOBs of whole device\n");
+ pr_info("writing OOBs of whole device\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
@@ -168,10 +167,10 @@
if (err)
return err;
if (i % 256 == 0)
- printk(PRINT_PREF "written up to eraseblock %u\n", i);
+ pr_info("written up to eraseblock %u\n", i);
cond_resched();
}
- printk(PRINT_PREF "written %u eraseblocks\n", i);
+ pr_info("written %u eraseblocks\n", i);
return 0;
}
@@ -194,17 +193,17 @@
ops.oobbuf = readbuf;
err = mtd_read_oob(mtd, addr, &ops);
if (err || ops.oobretlen != use_len) {
- printk(PRINT_PREF "error: readoob failed at %#llx\n",
+ pr_err("error: readoob failed at %#llx\n",
(long long)addr);
errcnt += 1;
return err ? err : -1;
}
if (memcmp(readbuf, writebuf, use_len)) {
- printk(PRINT_PREF "error: verify failed at %#llx\n",
+ pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
if (errcnt > 1000) {
- printk(PRINT_PREF "error: too many errors\n");
+ pr_err("error: too many errors\n");
return -1;
}
}
@@ -221,29 +220,28 @@
ops.oobbuf = readbuf;
err = mtd_read_oob(mtd, addr, &ops);
if (err || ops.oobretlen != mtd->ecclayout->oobavail) {
- printk(PRINT_PREF "error: readoob failed at "
- "%#llx\n", (long long)addr);
+ pr_err("error: readoob failed at %#llx\n",
+ (long long)addr);
errcnt += 1;
return err ? err : -1;
}
if (memcmp(readbuf + use_offset, writebuf, use_len)) {
- printk(PRINT_PREF "error: verify failed at "
- "%#llx\n", (long long)addr);
+ pr_err("error: verify failed at %#llx\n",
+ (long long)addr);
errcnt += 1;
if (errcnt > 1000) {
- printk(PRINT_PREF "error: too many "
- "errors\n");
+ pr_err("error: too many errors\n");
return -1;
}
}
for (k = 0; k < use_offset; ++k)
if (readbuf[k] != 0xff) {
- printk(PRINT_PREF "error: verify 0xff "
+ pr_err("error: verify 0xff "
"failed at %#llx\n",
(long long)addr);
errcnt += 1;
if (errcnt > 1000) {
- printk(PRINT_PREF "error: too "
+ pr_err("error: too "
"many errors\n");
return -1;
}
@@ -251,12 +249,12 @@
for (k = use_offset + use_len;
k < mtd->ecclayout->oobavail; ++k)
if (readbuf[k] != 0xff) {
- printk(PRINT_PREF "error: verify 0xff "
+ pr_err("error: verify 0xff "
"failed at %#llx\n",
(long long)addr);
errcnt += 1;
if (errcnt > 1000) {
- printk(PRINT_PREF "error: too "
+ pr_err("error: too "
"many errors\n");
return -1;
}
@@ -286,17 +284,17 @@
ops.oobbuf = readbuf;
err = mtd_read_oob(mtd, addr, &ops);
if (err || ops.oobretlen != len) {
- printk(PRINT_PREF "error: readoob failed at %#llx\n",
+ pr_err("error: readoob failed at %#llx\n",
(long long)addr);
errcnt += 1;
return err ? err : -1;
}
if (memcmp(readbuf, writebuf, len)) {
- printk(PRINT_PREF "error: verify failed at %#llx\n",
+ pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
if (errcnt > 1000) {
- printk(PRINT_PREF "error: too many errors\n");
+ pr_err("error: too many errors\n");
return -1;
}
}
@@ -309,7 +307,7 @@
int err;
unsigned int i;
- printk(PRINT_PREF "verifying all eraseblocks\n");
+ pr_info("verifying all eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
@@ -317,10 +315,10 @@
if (err)
return err;
if (i % 256 == 0)
- printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+ pr_info("verified up to eraseblock %u\n", i);
cond_resched();
}
- printk(PRINT_PREF "verified %u eraseblocks\n", i);
+ pr_info("verified %u eraseblocks\n", i);
return 0;
}
@@ -331,7 +329,7 @@
ret = mtd_block_isbad(mtd, addr);
if (ret)
- printk(PRINT_PREF "block %d is bad\n", ebnum);
+ pr_info("block %d is bad\n", ebnum);
return ret;
}
@@ -341,18 +339,18 @@
bbt = kmalloc(ebcnt, GFP_KERNEL);
if (!bbt) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
return -ENOMEM;
}
- printk(PRINT_PREF "scanning for bad eraseblocks\n");
+ pr_info("scanning for bad eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
bbt[i] = is_block_bad(i) ? 1 : 0;
if (bbt[i])
bad += 1;
cond_resched();
}
- printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
+ pr_info("scanned %d eraseblocks, %d are bad\n", i, bad);
return 0;
}
@@ -368,22 +366,22 @@
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
- printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
- printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
+ pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
- printk(PRINT_PREF "MTD device: %d\n", dev);
+ pr_info("MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
- printk(PRINT_PREF "error: cannot get MTD device\n");
+ pr_err("error: cannot get MTD device\n");
return err;
}
if (mtd->type != MTD_NANDFLASH) {
- printk(PRINT_PREF "this test requires NAND flash\n");
+ pr_info("this test requires NAND flash\n");
goto out;
}
@@ -392,7 +390,7 @@
ebcnt = tmp;
pgcnt = mtd->erasesize / mtd->writesize;
- printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
+ pr_info("MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
"eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
@@ -401,12 +399,12 @@
err = -ENOMEM;
readbuf = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!readbuf) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
goto out;
}
writebuf = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!writebuf) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
goto out;
}
@@ -420,7 +418,7 @@
vary_offset = 0;
/* First test: write all OOB, read it back and verify */
- printk(PRINT_PREF "test 1 of 5\n");
+ pr_info("test 1 of 5\n");
err = erase_whole_device();
if (err)
@@ -440,7 +438,7 @@
* Second test: write all OOB, a block at a time, read it back and
* verify.
*/
- printk(PRINT_PREF "test 2 of 5\n");
+ pr_info("test 2 of 5\n");
err = erase_whole_device();
if (err)
@@ -453,7 +451,7 @@
/* Check all eraseblocks */
simple_srand(3);
- printk(PRINT_PREF "verifying all eraseblocks\n");
+ pr_info("verifying all eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
@@ -461,16 +459,16 @@
if (err)
goto out;
if (i % 256 == 0)
- printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+ pr_info("verified up to eraseblock %u\n", i);
cond_resched();
}
- printk(PRINT_PREF "verified %u eraseblocks\n", i);
+ pr_info("verified %u eraseblocks\n", i);
/*
* Third test: write OOB at varying offsets and lengths, read it back
* and verify.
*/
- printk(PRINT_PREF "test 3 of 5\n");
+ pr_info("test 3 of 5\n");
err = erase_whole_device();
if (err)
@@ -503,7 +501,7 @@
vary_offset = 0;
/* Fourth test: try to write off end of device */
- printk(PRINT_PREF "test 4 of 5\n");
+ pr_info("test 4 of 5\n");
err = erase_whole_device();
if (err)
@@ -522,14 +520,14 @@
ops.ooboffs = mtd->ecclayout->oobavail;
ops.datbuf = NULL;
ops.oobbuf = writebuf;
- printk(PRINT_PREF "attempting to start write past end of OOB\n");
- printk(PRINT_PREF "an error is expected...\n");
+ pr_info("attempting to start write past end of OOB\n");
+ pr_info("an error is expected...\n");
err = mtd_write_oob(mtd, addr0, &ops);
if (err) {
- printk(PRINT_PREF "error occurred as expected\n");
+ pr_info("error occurred as expected\n");
err = 0;
} else {
- printk(PRINT_PREF "error: can write past end of OOB\n");
+ pr_err("error: can write past end of OOB\n");
errcnt += 1;
}
@@ -542,19 +540,19 @@
ops.ooboffs = mtd->ecclayout->oobavail;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
- printk(PRINT_PREF "attempting to start read past end of OOB\n");
- printk(PRINT_PREF "an error is expected...\n");
+ pr_info("attempting to start read past end of OOB\n");
+ pr_info("an error is expected...\n");
err = mtd_read_oob(mtd, addr0, &ops);
if (err) {
- printk(PRINT_PREF "error occurred as expected\n");
+ pr_info("error occurred as expected\n");
err = 0;
} else {
- printk(PRINT_PREF "error: can read past end of OOB\n");
+ pr_err("error: can read past end of OOB\n");
errcnt += 1;
}
if (bbt[ebcnt - 1])
- printk(PRINT_PREF "skipping end of device tests because last "
+ pr_info("skipping end of device tests because last "
"block is bad\n");
else {
/* Attempt to write off end of device */
@@ -566,14 +564,14 @@
ops.ooboffs = 0;
ops.datbuf = NULL;
ops.oobbuf = writebuf;
- printk(PRINT_PREF "attempting to write past end of device\n");
- printk(PRINT_PREF "an error is expected...\n");
+ pr_info("attempting to write past end of device\n");
+ pr_info("an error is expected...\n");
err = mtd_write_oob(mtd, mtd->size - mtd->writesize, &ops);
if (err) {
- printk(PRINT_PREF "error occurred as expected\n");
+ pr_info("error occurred as expected\n");
err = 0;
} else {
- printk(PRINT_PREF "error: wrote past end of device\n");
+ pr_err("error: wrote past end of device\n");
errcnt += 1;
}
@@ -586,14 +584,14 @@
ops.ooboffs = 0;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
- printk(PRINT_PREF "attempting to read past end of device\n");
- printk(PRINT_PREF "an error is expected...\n");
+ pr_info("attempting to read past end of device\n");
+ pr_info("an error is expected...\n");
err = mtd_read_oob(mtd, mtd->size - mtd->writesize, &ops);
if (err) {
- printk(PRINT_PREF "error occurred as expected\n");
+ pr_info("error occurred as expected\n");
err = 0;
} else {
- printk(PRINT_PREF "error: read past end of device\n");
+ pr_err("error: read past end of device\n");
errcnt += 1;
}
@@ -610,14 +608,14 @@
ops.ooboffs = 1;
ops.datbuf = NULL;
ops.oobbuf = writebuf;
- printk(PRINT_PREF "attempting to write past end of device\n");
- printk(PRINT_PREF "an error is expected...\n");
+ pr_info("attempting to write past end of device\n");
+ pr_info("an error is expected...\n");
err = mtd_write_oob(mtd, mtd->size - mtd->writesize, &ops);
if (err) {
- printk(PRINT_PREF "error occurred as expected\n");
+ pr_info("error occurred as expected\n");
err = 0;
} else {
- printk(PRINT_PREF "error: wrote past end of device\n");
+ pr_err("error: wrote past end of device\n");
errcnt += 1;
}
@@ -630,20 +628,20 @@
ops.ooboffs = 1;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
- printk(PRINT_PREF "attempting to read past end of device\n");
- printk(PRINT_PREF "an error is expected...\n");
+ pr_info("attempting to read past end of device\n");
+ pr_info("an error is expected...\n");
err = mtd_read_oob(mtd, mtd->size - mtd->writesize, &ops);
if (err) {
- printk(PRINT_PREF "error occurred as expected\n");
+ pr_info("error occurred as expected\n");
err = 0;
} else {
- printk(PRINT_PREF "error: read past end of device\n");
+ pr_err("error: read past end of device\n");
errcnt += 1;
}
}
/* Fifth test: write / read across block boundaries */
- printk(PRINT_PREF "test 5 of 5\n");
+ pr_info("test 5 of 5\n");
/* Erase all eraseblocks */
err = erase_whole_device();
@@ -652,7 +650,7 @@
/* Write all eraseblocks */
simple_srand(11);
- printk(PRINT_PREF "writing OOBs of whole device\n");
+ pr_info("writing OOBs of whole device\n");
for (i = 0; i < ebcnt - 1; ++i) {
int cnt = 2;
int pg;
@@ -674,17 +672,16 @@
if (err)
goto out;
if (i % 256 == 0)
- printk(PRINT_PREF "written up to eraseblock "
- "%u\n", i);
+ pr_info("written up to eraseblock %u\n", i);
cond_resched();
addr += mtd->writesize;
}
}
- printk(PRINT_PREF "written %u eraseblocks\n", i);
+ pr_info("written %u eraseblocks\n", i);
/* Check all eraseblocks */
simple_srand(11);
- printk(PRINT_PREF "verifying all eraseblocks\n");
+ pr_info("verifying all eraseblocks\n");
for (i = 0; i < ebcnt - 1; ++i) {
if (bbt[i] || bbt[i + 1])
continue;
@@ -702,28 +699,28 @@
if (err)
goto out;
if (memcmp(readbuf, writebuf, mtd->ecclayout->oobavail * 2)) {
- printk(PRINT_PREF "error: verify failed at %#llx\n",
+ pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
if (errcnt > 1000) {
- printk(PRINT_PREF "error: too many errors\n");
+ pr_err("error: too many errors\n");
goto out;
}
}
if (i % 256 == 0)
- printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+ pr_info("verified up to eraseblock %u\n", i);
cond_resched();
}
- printk(PRINT_PREF "verified %u eraseblocks\n", i);
+ pr_info("verified %u eraseblocks\n", i);
- printk(PRINT_PREF "finished with %d errors\n", errcnt);
+ pr_info("finished with %d errors\n", errcnt);
out:
kfree(bbt);
kfree(writebuf);
kfree(readbuf);
put_mtd_device(mtd);
if (err)
- printk(PRINT_PREF "error %d occurred\n", err);
+ pr_info("error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
diff --git a/drivers/mtd/tests/mtd_pagetest.c b/drivers/mtd/tests/mtd_pagetest.c
index 252ddb0..f93a76f 100644
--- a/drivers/mtd/tests/mtd_pagetest.c
+++ b/drivers/mtd/tests/mtd_pagetest.c
@@ -19,6 +19,8 @@
* Author: Adrian Hunter <ext-adrian.hunter@nokia.com>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <asm/div64.h>
#include <linux/init.h>
#include <linux/module.h>
@@ -28,8 +30,6 @@
#include <linux/slab.h>
#include <linux/sched.h>
-#define PRINT_PREF KERN_INFO "mtd_pagetest: "
-
static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -79,12 +79,12 @@
err = mtd_erase(mtd, &ei);
if (err) {
- printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum);
+ pr_err("error %d while erasing EB %d\n", err, ebnum);
return err;
}
if (ei.state == MTD_ERASE_FAILED) {
- printk(PRINT_PREF "some erase error occurred at EB %d\n",
+ pr_err("some erase error occurred at EB %d\n",
ebnum);
return -EIO;
}
@@ -102,7 +102,7 @@
cond_resched();
err = mtd_write(mtd, addr, mtd->erasesize, &written, writebuf);
if (err || written != mtd->erasesize)
- printk(PRINT_PREF "error: write failed at %#llx\n",
+ pr_err("error: write failed at %#llx\n",
(long long)addr);
return err;
@@ -131,7 +131,7 @@
if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr0);
return err;
}
@@ -139,7 +139,7 @@
if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)(addrn - bufsize));
return err;
}
@@ -148,12 +148,12 @@
if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr);
break;
}
if (memcmp(twopages, writebuf + (j * pgsize), bufsize)) {
- printk(PRINT_PREF "error: verify failed at %#llx\n",
+ pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
}
@@ -166,7 +166,7 @@
if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr0);
return err;
}
@@ -174,7 +174,7 @@
if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)(addrn - bufsize));
return err;
}
@@ -183,14 +183,14 @@
if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr);
return err;
}
memcpy(boundary, writebuf + mtd->erasesize - pgsize, pgsize);
set_random_data(boundary + pgsize, pgsize);
if (memcmp(twopages, boundary, bufsize)) {
- printk(PRINT_PREF "error: verify failed at %#llx\n",
+ pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
}
@@ -206,10 +206,10 @@
loff_t addr, addr0, addrn;
unsigned char *pp1, *pp2, *pp3, *pp4;
- printk(PRINT_PREF "crosstest\n");
+ pr_info("crosstest\n");
pp1 = kmalloc(pgsize * 4, GFP_KERNEL);
if (!pp1) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
return -ENOMEM;
}
pp2 = pp1 + pgsize;
@@ -231,7 +231,7 @@
if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr);
kfree(pp1);
return err;
@@ -243,7 +243,7 @@
if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr);
kfree(pp1);
return err;
@@ -251,12 +251,12 @@
/* Read first page to pp2 */
addr = addr0;
- printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
+ pr_info("reading page at %#llx\n", (long long)addr);
err = mtd_read(mtd, addr, pgsize, &read, pp2);
if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr);
kfree(pp1);
return err;
@@ -264,12 +264,12 @@
/* Read last page to pp3 */
addr = addrn - pgsize;
- printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
+ pr_info("reading page at %#llx\n", (long long)addr);
err = mtd_read(mtd, addr, pgsize, &read, pp3);
if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr);
kfree(pp1);
return err;
@@ -277,25 +277,25 @@
/* Read first page again to pp4 */
addr = addr0;
- printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
+ pr_info("reading page at %#llx\n", (long long)addr);
err = mtd_read(mtd, addr, pgsize, &read, pp4);
if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr);
kfree(pp1);
return err;
}
/* pp2 and pp4 should be the same */
- printk(PRINT_PREF "verifying pages read at %#llx match\n",
+ pr_info("verifying pages read at %#llx match\n",
(long long)addr0);
if (memcmp(pp2, pp4, pgsize)) {
- printk(PRINT_PREF "verify failed!\n");
+ pr_err("verify failed!\n");
errcnt += 1;
} else if (!err)
- printk(PRINT_PREF "crosstest ok\n");
+ pr_info("crosstest ok\n");
kfree(pp1);
return err;
}
@@ -307,7 +307,7 @@
loff_t addr0;
char *readbuf = twopages;
- printk(PRINT_PREF "erasecrosstest\n");
+ pr_info("erasecrosstest\n");
ebnum = 0;
addr0 = 0;
@@ -320,79 +320,79 @@
while (ebnum2 && bbt[ebnum2])
ebnum2 -= 1;
- printk(PRINT_PREF "erasing block %d\n", ebnum);
+ pr_info("erasing block %d\n", ebnum);
err = erase_eraseblock(ebnum);
if (err)
return err;
- printk(PRINT_PREF "writing 1st page of block %d\n", ebnum);
+ pr_info("writing 1st page of block %d\n", ebnum);
set_random_data(writebuf, pgsize);
strcpy(writebuf, "There is no data like this!");
err = mtd_write(mtd, addr0, pgsize, &written, writebuf);
if (err || written != pgsize) {
- printk(PRINT_PREF "error: write failed at %#llx\n",
+ pr_info("error: write failed at %#llx\n",
(long long)addr0);
return err ? err : -1;
}
- printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
+ pr_info("reading 1st page of block %d\n", ebnum);
memset(readbuf, 0, pgsize);
err = mtd_read(mtd, addr0, pgsize, &read, readbuf);
if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr0);
return err ? err : -1;
}
- printk(PRINT_PREF "verifying 1st page of block %d\n", ebnum);
+ pr_info("verifying 1st page of block %d\n", ebnum);
if (memcmp(writebuf, readbuf, pgsize)) {
- printk(PRINT_PREF "verify failed!\n");
+ pr_err("verify failed!\n");
errcnt += 1;
return -1;
}
- printk(PRINT_PREF "erasing block %d\n", ebnum);
+ pr_info("erasing block %d\n", ebnum);
err = erase_eraseblock(ebnum);
if (err)
return err;
- printk(PRINT_PREF "writing 1st page of block %d\n", ebnum);
+ pr_info("writing 1st page of block %d\n", ebnum);
set_random_data(writebuf, pgsize);
strcpy(writebuf, "There is no data like this!");
err = mtd_write(mtd, addr0, pgsize, &written, writebuf);
if (err || written != pgsize) {
- printk(PRINT_PREF "error: write failed at %#llx\n",
+ pr_err("error: write failed at %#llx\n",
(long long)addr0);
return err ? err : -1;
}
- printk(PRINT_PREF "erasing block %d\n", ebnum2);
+ pr_info("erasing block %d\n", ebnum2);
err = erase_eraseblock(ebnum2);
if (err)
return err;
- printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
+ pr_info("reading 1st page of block %d\n", ebnum);
memset(readbuf, 0, pgsize);
err = mtd_read(mtd, addr0, pgsize, &read, readbuf);
if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr0);
return err ? err : -1;
}
- printk(PRINT_PREF "verifying 1st page of block %d\n", ebnum);
+ pr_info("verifying 1st page of block %d\n", ebnum);
if (memcmp(writebuf, readbuf, pgsize)) {
- printk(PRINT_PREF "verify failed!\n");
+ pr_err("verify failed!\n");
errcnt += 1;
return -1;
}
if (!err)
- printk(PRINT_PREF "erasecrosstest ok\n");
+ pr_info("erasecrosstest ok\n");
return err;
}
@@ -402,7 +402,7 @@
int err = 0, i, ebnum, ok = 1;
loff_t addr0;
- printk(PRINT_PREF "erasetest\n");
+ pr_info("erasetest\n");
ebnum = 0;
addr0 = 0;
@@ -411,40 +411,40 @@
ebnum += 1;
}
- printk(PRINT_PREF "erasing block %d\n", ebnum);
+ pr_info("erasing block %d\n", ebnum);
err = erase_eraseblock(ebnum);
if (err)
return err;
- printk(PRINT_PREF "writing 1st page of block %d\n", ebnum);
+ pr_info("writing 1st page of block %d\n", ebnum);
set_random_data(writebuf, pgsize);
err = mtd_write(mtd, addr0, pgsize, &written, writebuf);
if (err || written != pgsize) {
- printk(PRINT_PREF "error: write failed at %#llx\n",
+ pr_err("error: write failed at %#llx\n",
(long long)addr0);
return err ? err : -1;
}
- printk(PRINT_PREF "erasing block %d\n", ebnum);
+ pr_info("erasing block %d\n", ebnum);
err = erase_eraseblock(ebnum);
if (err)
return err;
- printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
+ pr_info("reading 1st page of block %d\n", ebnum);
err = mtd_read(mtd, addr0, pgsize, &read, twopages);
if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr0);
return err ? err : -1;
}
- printk(PRINT_PREF "verifying 1st page of block %d is all 0xff\n",
+ pr_info("verifying 1st page of block %d is all 0xff\n",
ebnum);
for (i = 0; i < pgsize; ++i)
if (twopages[i] != 0xff) {
- printk(PRINT_PREF "verifying all 0xff failed at %d\n",
+ pr_err("verifying all 0xff failed at %d\n",
i);
errcnt += 1;
ok = 0;
@@ -452,7 +452,7 @@
}
if (ok && !err)
- printk(PRINT_PREF "erasetest ok\n");
+ pr_info("erasetest ok\n");
return err;
}
@@ -464,7 +464,7 @@
ret = mtd_block_isbad(mtd, addr);
if (ret)
- printk(PRINT_PREF "block %d is bad\n", ebnum);
+ pr_info("block %d is bad\n", ebnum);
return ret;
}
@@ -474,18 +474,18 @@
bbt = kzalloc(ebcnt, GFP_KERNEL);
if (!bbt) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
return -ENOMEM;
}
- printk(PRINT_PREF "scanning for bad eraseblocks\n");
+ pr_info("scanning for bad eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
bbt[i] = is_block_bad(i) ? 1 : 0;
if (bbt[i])
bad += 1;
cond_resched();
}
- printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
+ pr_info("scanned %d eraseblocks, %d are bad\n", i, bad);
return 0;
}
@@ -499,22 +499,22 @@
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
- printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
- printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
+ pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
- printk(PRINT_PREF "MTD device: %d\n", dev);
+ pr_info("MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
- printk(PRINT_PREF "error: cannot get MTD device\n");
+ pr_err("error: cannot get MTD device\n");
return err;
}
if (mtd->type != MTD_NANDFLASH) {
- printk(PRINT_PREF "this test requires NAND flash\n");
+ pr_info("this test requires NAND flash\n");
goto out;
}
@@ -524,7 +524,7 @@
pgcnt = mtd->erasesize / mtd->writesize;
pgsize = mtd->writesize;
- printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
+ pr_info("MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
"eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
@@ -534,17 +534,17 @@
bufsize = pgsize * 2;
writebuf = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!writebuf) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
goto out;
}
twopages = kmalloc(bufsize, GFP_KERNEL);
if (!twopages) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
goto out;
}
boundary = kmalloc(bufsize, GFP_KERNEL);
if (!boundary) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
goto out;
}
@@ -553,7 +553,7 @@
goto out;
/* Erase all eraseblocks */
- printk(PRINT_PREF "erasing whole device\n");
+ pr_info("erasing whole device\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
@@ -562,11 +562,11 @@
goto out;
cond_resched();
}
- printk(PRINT_PREF "erased %u eraseblocks\n", i);
+ pr_info("erased %u eraseblocks\n", i);
/* Write all eraseblocks */
simple_srand(1);
- printk(PRINT_PREF "writing whole device\n");
+ pr_info("writing whole device\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
@@ -574,14 +574,14 @@
if (err)
goto out;
if (i % 256 == 0)
- printk(PRINT_PREF "written up to eraseblock %u\n", i);
+ pr_info("written up to eraseblock %u\n", i);
cond_resched();
}
- printk(PRINT_PREF "written %u eraseblocks\n", i);
+ pr_info("written %u eraseblocks\n", i);
/* Check all eraseblocks */
simple_srand(1);
- printk(PRINT_PREF "verifying all eraseblocks\n");
+ pr_info("verifying all eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
@@ -589,10 +589,10 @@
if (err)
goto out;
if (i % 256 == 0)
- printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+ pr_info("verified up to eraseblock %u\n", i);
cond_resched();
}
- printk(PRINT_PREF "verified %u eraseblocks\n", i);
+ pr_info("verified %u eraseblocks\n", i);
err = crosstest();
if (err)
@@ -606,7 +606,7 @@
if (err)
goto out;
- printk(PRINT_PREF "finished with %d errors\n", errcnt);
+ pr_info("finished with %d errors\n", errcnt);
out:
kfree(bbt);
@@ -615,7 +615,7 @@
kfree(writebuf);
put_mtd_device(mtd);
if (err)
- printk(PRINT_PREF "error %d occurred\n", err);
+ pr_info("error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
diff --git a/drivers/mtd/tests/mtd_readtest.c b/drivers/mtd/tests/mtd_readtest.c
index 121aba1..266de04 100644
--- a/drivers/mtd/tests/mtd_readtest.c
+++ b/drivers/mtd/tests/mtd_readtest.c
@@ -19,6 +19,8 @@
* Author: Adrian Hunter <ext-adrian.hunter@nokia.com>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -27,8 +29,6 @@
#include <linux/slab.h>
#include <linux/sched.h>
-#define PRINT_PREF KERN_INFO "mtd_readtest: "
-
static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -51,12 +51,12 @@
void *oobbuf = iobuf1;
for (i = 0; i < pgcnt; i++) {
- memset(buf, 0 , pgcnt);
+ memset(buf, 0 , pgsize);
ret = mtd_read(mtd, addr, pgsize, &read, buf);
if (ret == -EUCLEAN)
ret = 0;
if (ret || read != pgsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr);
if (!err)
err = ret;
@@ -77,7 +77,7 @@
ret = mtd_read_oob(mtd, addr, &ops);
if ((ret && !mtd_is_bitflip(ret)) ||
ops.oobretlen != mtd->oobsize) {
- printk(PRINT_PREF "error: read oob failed at "
+ pr_err("error: read oob failed at "
"%#llx\n", (long long)addr);
if (!err)
err = ret;
@@ -99,7 +99,7 @@
char line[128];
int pg, oob;
- printk(PRINT_PREF "dumping eraseblock %d\n", ebnum);
+ pr_info("dumping eraseblock %d\n", ebnum);
n = mtd->erasesize;
for (i = 0; i < n;) {
char *p = line;
@@ -112,7 +112,7 @@
}
if (!mtd->oobsize)
return;
- printk(PRINT_PREF "dumping oob from eraseblock %d\n", ebnum);
+ pr_info("dumping oob from eraseblock %d\n", ebnum);
n = mtd->oobsize;
for (pg = 0, i = 0; pg < pgcnt; pg++)
for (oob = 0; oob < n;) {
@@ -134,7 +134,7 @@
ret = mtd_block_isbad(mtd, addr);
if (ret)
- printk(PRINT_PREF "block %d is bad\n", ebnum);
+ pr_info("block %d is bad\n", ebnum);
return ret;
}
@@ -144,21 +144,21 @@
bbt = kzalloc(ebcnt, GFP_KERNEL);
if (!bbt) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
return -ENOMEM;
}
if (!mtd_can_have_bb(mtd))
return 0;
- printk(PRINT_PREF "scanning for bad eraseblocks\n");
+ pr_info("scanning for bad eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
bbt[i] = is_block_bad(i) ? 1 : 0;
if (bbt[i])
bad += 1;
cond_resched();
}
- printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
+ pr_info("scanned %d eraseblocks, %d are bad\n", i, bad);
return 0;
}
@@ -171,21 +171,21 @@
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
- printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
return -EINVAL;
}
- printk(PRINT_PREF "MTD device: %d\n", dev);
+ pr_info("MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
- printk(PRINT_PREF "error: Cannot get MTD device\n");
+ pr_err("error: Cannot get MTD device\n");
return err;
}
if (mtd->writesize == 1) {
- printk(PRINT_PREF "not NAND flash, assume page size is 512 "
+ pr_info("not NAND flash, assume page size is 512 "
"bytes.\n");
pgsize = 512;
} else
@@ -196,7 +196,7 @@
ebcnt = tmp;
pgcnt = mtd->erasesize / pgsize;
- printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
+ pr_info("MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
"eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
@@ -205,12 +205,12 @@
err = -ENOMEM;
iobuf = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!iobuf) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
goto out;
}
iobuf1 = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!iobuf1) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
goto out;
}
@@ -219,7 +219,7 @@
goto out;
/* Read all eraseblocks 1 page at a time */
- printk(PRINT_PREF "testing page read\n");
+ pr_info("testing page read\n");
for (i = 0; i < ebcnt; ++i) {
int ret;
@@ -235,9 +235,9 @@
}
if (err)
- printk(PRINT_PREF "finished with errors\n");
+ pr_info("finished with errors\n");
else
- printk(PRINT_PREF "finished\n");
+ pr_info("finished\n");
out:
@@ -246,7 +246,7 @@
kfree(bbt);
put_mtd_device(mtd);
if (err)
- printk(PRINT_PREF "error %d occurred\n", err);
+ pr_info("error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
diff --git a/drivers/mtd/tests/mtd_speedtest.c b/drivers/mtd/tests/mtd_speedtest.c
index 42b0f74..596cbea 100644
--- a/drivers/mtd/tests/mtd_speedtest.c
+++ b/drivers/mtd/tests/mtd_speedtest.c
@@ -19,6 +19,8 @@
* Author: Adrian Hunter <adrian.hunter@nokia.com>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -28,8 +30,6 @@
#include <linux/sched.h>
#include <linux/random.h>
-#define PRINT_PREF KERN_INFO "mtd_speedtest: "
-
static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -70,12 +70,12 @@
err = mtd_erase(mtd, &ei);
if (err) {
- printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum);
+ pr_err("error %d while erasing EB %d\n", err, ebnum);
return err;
}
if (ei.state == MTD_ERASE_FAILED) {
- printk(PRINT_PREF "some erase error occurred at EB %d\n",
+ pr_err("some erase error occurred at EB %d\n",
ebnum);
return -EIO;
}
@@ -96,13 +96,13 @@
err = mtd_erase(mtd, &ei);
if (err) {
- printk(PRINT_PREF "error %d while erasing EB %d, blocks %d\n",
+ pr_err("error %d while erasing EB %d, blocks %d\n",
err, ebnum, blocks);
return err;
}
if (ei.state == MTD_ERASE_FAILED) {
- printk(PRINT_PREF "some erase error occurred at EB %d,"
+ pr_err("some erase error occurred at EB %d,"
"blocks %d\n", ebnum, blocks);
return -EIO;
}
@@ -134,7 +134,7 @@
err = mtd_write(mtd, addr, mtd->erasesize, &written, iobuf);
if (err || written != mtd->erasesize) {
- printk(PRINT_PREF "error: write failed at %#llx\n", addr);
+ pr_err("error: write failed at %#llx\n", addr);
if (!err)
err = -EINVAL;
}
@@ -152,7 +152,7 @@
for (i = 0; i < pgcnt; i++) {
err = mtd_write(mtd, addr, pgsize, &written, buf);
if (err || written != pgsize) {
- printk(PRINT_PREF "error: write failed at %#llx\n",
+ pr_err("error: write failed at %#llx\n",
addr);
if (!err)
err = -EINVAL;
@@ -175,7 +175,7 @@
for (i = 0; i < n; i++) {
err = mtd_write(mtd, addr, sz, &written, buf);
if (err || written != sz) {
- printk(PRINT_PREF "error: write failed at %#llx\n",
+ pr_err("error: write failed at %#llx\n",
addr);
if (!err)
err = -EINVAL;
@@ -187,7 +187,7 @@
if (pgcnt % 2) {
err = mtd_write(mtd, addr, pgsize, &written, buf);
if (err || written != pgsize) {
- printk(PRINT_PREF "error: write failed at %#llx\n",
+ pr_err("error: write failed at %#llx\n",
addr);
if (!err)
err = -EINVAL;
@@ -208,7 +208,7 @@
if (mtd_is_bitflip(err))
err = 0;
if (err || read != mtd->erasesize) {
- printk(PRINT_PREF "error: read failed at %#llx\n", addr);
+ pr_err("error: read failed at %#llx\n", addr);
if (!err)
err = -EINVAL;
}
@@ -229,7 +229,7 @@
if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
addr);
if (!err)
err = -EINVAL;
@@ -255,7 +255,7 @@
if (mtd_is_bitflip(err))
err = 0;
if (err || read != sz) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
addr);
if (!err)
err = -EINVAL;
@@ -270,7 +270,7 @@
if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
addr);
if (!err)
err = -EINVAL;
@@ -287,7 +287,7 @@
ret = mtd_block_isbad(mtd, addr);
if (ret)
- printk(PRINT_PREF "block %d is bad\n", ebnum);
+ pr_info("block %d is bad\n", ebnum);
return ret;
}
@@ -321,21 +321,21 @@
bbt = kzalloc(ebcnt, GFP_KERNEL);
if (!bbt) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
return -ENOMEM;
}
if (!mtd_can_have_bb(mtd))
goto out;
- printk(PRINT_PREF "scanning for bad eraseblocks\n");
+ pr_info("scanning for bad eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
bbt[i] = is_block_bad(i) ? 1 : 0;
if (bbt[i])
bad += 1;
cond_resched();
}
- printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
+ pr_info("scanned %d eraseblocks, %d are bad\n", i, bad);
out:
goodebcnt = ebcnt - bad;
return 0;
@@ -351,25 +351,25 @@
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
- printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
- printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
+ pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
if (count)
- printk(PRINT_PREF "MTD device: %d count: %d\n", dev, count);
+ pr_info("MTD device: %d count: %d\n", dev, count);
else
- printk(PRINT_PREF "MTD device: %d\n", dev);
+ pr_info("MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
- printk(PRINT_PREF "error: cannot get MTD device\n");
+ pr_err("error: cannot get MTD device\n");
return err;
}
if (mtd->writesize == 1) {
- printk(PRINT_PREF "not NAND flash, assume page size is 512 "
+ pr_info("not NAND flash, assume page size is 512 "
"bytes.\n");
pgsize = 512;
} else
@@ -380,7 +380,7 @@
ebcnt = tmp;
pgcnt = mtd->erasesize / pgsize;
- printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
+ pr_info("MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
"eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
@@ -392,7 +392,7 @@
err = -ENOMEM;
iobuf = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!iobuf) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
goto out;
}
@@ -407,7 +407,7 @@
goto out;
/* Write all eraseblocks, 1 eraseblock at a time */
- printk(PRINT_PREF "testing eraseblock write speed\n");
+ pr_info("testing eraseblock write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
@@ -419,10 +419,10 @@
}
stop_timing();
speed = calc_speed();
- printk(PRINT_PREF "eraseblock write speed is %ld KiB/s\n", speed);
+ pr_info("eraseblock write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 1 eraseblock at a time */
- printk(PRINT_PREF "testing eraseblock read speed\n");
+ pr_info("testing eraseblock read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
@@ -434,14 +434,14 @@
}
stop_timing();
speed = calc_speed();
- printk(PRINT_PREF "eraseblock read speed is %ld KiB/s\n", speed);
+ pr_info("eraseblock read speed is %ld KiB/s\n", speed);
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 1 page at a time */
- printk(PRINT_PREF "testing page write speed\n");
+ pr_info("testing page write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
@@ -453,10 +453,10 @@
}
stop_timing();
speed = calc_speed();
- printk(PRINT_PREF "page write speed is %ld KiB/s\n", speed);
+ pr_info("page write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 1 page at a time */
- printk(PRINT_PREF "testing page read speed\n");
+ pr_info("testing page read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
@@ -468,14 +468,14 @@
}
stop_timing();
speed = calc_speed();
- printk(PRINT_PREF "page read speed is %ld KiB/s\n", speed);
+ pr_info("page read speed is %ld KiB/s\n", speed);
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 2 pages at a time */
- printk(PRINT_PREF "testing 2 page write speed\n");
+ pr_info("testing 2 page write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
@@ -487,10 +487,10 @@
}
stop_timing();
speed = calc_speed();
- printk(PRINT_PREF "2 page write speed is %ld KiB/s\n", speed);
+ pr_info("2 page write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 2 pages at a time */
- printk(PRINT_PREF "testing 2 page read speed\n");
+ pr_info("testing 2 page read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
@@ -502,10 +502,10 @@
}
stop_timing();
speed = calc_speed();
- printk(PRINT_PREF "2 page read speed is %ld KiB/s\n", speed);
+ pr_info("2 page read speed is %ld KiB/s\n", speed);
/* Erase all eraseblocks */
- printk(PRINT_PREF "Testing erase speed\n");
+ pr_info("Testing erase speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
@@ -517,12 +517,12 @@
}
stop_timing();
speed = calc_speed();
- printk(PRINT_PREF "erase speed is %ld KiB/s\n", speed);
+ pr_info("erase speed is %ld KiB/s\n", speed);
/* Multi-block erase all eraseblocks */
for (k = 1; k < 7; k++) {
blocks = 1 << k;
- printk(PRINT_PREF "Testing %dx multi-block erase speed\n",
+ pr_info("Testing %dx multi-block erase speed\n",
blocks);
start_timing();
for (i = 0; i < ebcnt; ) {
@@ -541,16 +541,16 @@
}
stop_timing();
speed = calc_speed();
- printk(PRINT_PREF "%dx multi-block erase speed is %ld KiB/s\n",
+ pr_info("%dx multi-block erase speed is %ld KiB/s\n",
blocks, speed);
}
- printk(PRINT_PREF "finished\n");
+ pr_info("finished\n");
out:
kfree(iobuf);
kfree(bbt);
put_mtd_device(mtd);
if (err)
- printk(PRINT_PREF "error %d occurred\n", err);
+ pr_info("error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
diff --git a/drivers/mtd/tests/mtd_stresstest.c b/drivers/mtd/tests/mtd_stresstest.c
index cb268ce..3729f67 100644
--- a/drivers/mtd/tests/mtd_stresstest.c
+++ b/drivers/mtd/tests/mtd_stresstest.c
@@ -19,6 +19,8 @@
* Author: Adrian Hunter <ext-adrian.hunter@nokia.com>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -29,8 +31,6 @@
#include <linux/vmalloc.h>
#include <linux/random.h>
-#define PRINT_PREF KERN_INFO "mtd_stresstest: "
-
static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -94,12 +94,12 @@
err = mtd_erase(mtd, &ei);
if (unlikely(err)) {
- printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum);
+ pr_err("error %d while erasing EB %d\n", err, ebnum);
return err;
}
if (unlikely(ei.state == MTD_ERASE_FAILED)) {
- printk(PRINT_PREF "some erase error occurred at EB %d\n",
+ pr_err("some erase error occurred at EB %d\n",
ebnum);
return -EIO;
}
@@ -114,7 +114,7 @@
ret = mtd_block_isbad(mtd, addr);
if (ret)
- printk(PRINT_PREF "block %d is bad\n", ebnum);
+ pr_info("block %d is bad\n", ebnum);
return ret;
}
@@ -137,7 +137,7 @@
if (mtd_is_bitflip(err))
err = 0;
if (unlikely(err || read != len)) {
- printk(PRINT_PREF "error: read failed at 0x%llx\n",
+ pr_err("error: read failed at 0x%llx\n",
(long long)addr);
if (!err)
err = -EINVAL;
@@ -174,7 +174,7 @@
addr = eb * mtd->erasesize + offs;
err = mtd_write(mtd, addr, len, &written, writebuf);
if (unlikely(err || written != len)) {
- printk(PRINT_PREF "error: write failed at 0x%llx\n",
+ pr_err("error: write failed at 0x%llx\n",
(long long)addr);
if (!err)
err = -EINVAL;
@@ -203,21 +203,21 @@
bbt = kzalloc(ebcnt, GFP_KERNEL);
if (!bbt) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
return -ENOMEM;
}
if (!mtd_can_have_bb(mtd))
return 0;
- printk(PRINT_PREF "scanning for bad eraseblocks\n");
+ pr_info("scanning for bad eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
bbt[i] = is_block_bad(i) ? 1 : 0;
if (bbt[i])
bad += 1;
cond_resched();
}
- printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
+ pr_info("scanned %d eraseblocks, %d are bad\n", i, bad);
return 0;
}
@@ -231,22 +231,22 @@
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
- printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
- printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
+ pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
- printk(PRINT_PREF "MTD device: %d\n", dev);
+ pr_info("MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
- printk(PRINT_PREF "error: cannot get MTD device\n");
+ pr_err("error: cannot get MTD device\n");
return err;
}
if (mtd->writesize == 1) {
- printk(PRINT_PREF "not NAND flash, assume page size is 512 "
+ pr_info("not NAND flash, assume page size is 512 "
"bytes.\n");
pgsize = 512;
} else
@@ -257,14 +257,14 @@
ebcnt = tmp;
pgcnt = mtd->erasesize / pgsize;
- printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
+ pr_info("MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
"eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
pgsize, ebcnt, pgcnt, mtd->oobsize);
if (ebcnt < 2) {
- printk(PRINT_PREF "error: need at least 2 eraseblocks\n");
+ pr_err("error: need at least 2 eraseblocks\n");
err = -ENOSPC;
goto out_put_mtd;
}
@@ -277,7 +277,7 @@
writebuf = vmalloc(bufsize);
offsets = kmalloc(ebcnt * sizeof(int), GFP_KERNEL);
if (!readbuf || !writebuf || !offsets) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
goto out;
}
for (i = 0; i < ebcnt; i++)
@@ -290,16 +290,16 @@
goto out;
/* Do operations */
- printk(PRINT_PREF "doing operations\n");
+ pr_info("doing operations\n");
for (op = 0; op < count; op++) {
if ((op & 1023) == 0)
- printk(PRINT_PREF "%d operations done\n", op);
+ pr_info("%d operations done\n", op);
err = do_operation();
if (err)
goto out;
cond_resched();
}
- printk(PRINT_PREF "finished, %d operations done\n", op);
+ pr_info("finished, %d operations done\n", op);
out:
kfree(offsets);
@@ -309,7 +309,7 @@
out_put_mtd:
put_mtd_device(mtd);
if (err)
- printk(PRINT_PREF "error %d occurred\n", err);
+ pr_info("error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
diff --git a/drivers/mtd/tests/mtd_subpagetest.c b/drivers/mtd/tests/mtd_subpagetest.c
index 9667bf5..c880c22 100644
--- a/drivers/mtd/tests/mtd_subpagetest.c
+++ b/drivers/mtd/tests/mtd_subpagetest.c
@@ -19,6 +19,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -27,8 +29,6 @@
#include <linux/slab.h>
#include <linux/sched.h>
-#define PRINT_PREF KERN_INFO "mtd_subpagetest: "
-
static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -82,12 +82,12 @@
err = mtd_erase(mtd, &ei);
if (err) {
- printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum);
+ pr_err("error %d while erasing EB %d\n", err, ebnum);
return err;
}
if (ei.state == MTD_ERASE_FAILED) {
- printk(PRINT_PREF "some erase error occurred at EB %d\n",
+ pr_err("some erase error occurred at EB %d\n",
ebnum);
return -EIO;
}
@@ -100,7 +100,7 @@
int err;
unsigned int i;
- printk(PRINT_PREF "erasing whole device\n");
+ pr_info("erasing whole device\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
@@ -109,7 +109,7 @@
return err;
cond_resched();
}
- printk(PRINT_PREF "erased %u eraseblocks\n", i);
+ pr_info("erased %u eraseblocks\n", i);
return 0;
}
@@ -122,11 +122,11 @@
set_random_data(writebuf, subpgsize);
err = mtd_write(mtd, addr, subpgsize, &written, writebuf);
if (unlikely(err || written != subpgsize)) {
- printk(PRINT_PREF "error: write failed at %#llx\n",
+ pr_err("error: write failed at %#llx\n",
(long long)addr);
if (written != subpgsize) {
- printk(PRINT_PREF " write size: %#x\n", subpgsize);
- printk(PRINT_PREF " written: %#zx\n", written);
+ pr_err(" write size: %#x\n", subpgsize);
+ pr_err(" written: %#zx\n", written);
}
return err ? err : -1;
}
@@ -136,11 +136,11 @@
set_random_data(writebuf, subpgsize);
err = mtd_write(mtd, addr, subpgsize, &written, writebuf);
if (unlikely(err || written != subpgsize)) {
- printk(PRINT_PREF "error: write failed at %#llx\n",
+ pr_err("error: write failed at %#llx\n",
(long long)addr);
if (written != subpgsize) {
- printk(PRINT_PREF " write size: %#x\n", subpgsize);
- printk(PRINT_PREF " written: %#zx\n", written);
+ pr_err(" write size: %#x\n", subpgsize);
+ pr_err(" written: %#zx\n", written);
}
return err ? err : -1;
}
@@ -160,12 +160,12 @@
set_random_data(writebuf, subpgsize * k);
err = mtd_write(mtd, addr, subpgsize * k, &written, writebuf);
if (unlikely(err || written != subpgsize * k)) {
- printk(PRINT_PREF "error: write failed at %#llx\n",
+ pr_err("error: write failed at %#llx\n",
(long long)addr);
if (written != subpgsize) {
- printk(PRINT_PREF " write size: %#x\n",
+ pr_err(" write size: %#x\n",
subpgsize * k);
- printk(PRINT_PREF " written: %#08zx\n",
+ pr_err(" written: %#08zx\n",
written);
}
return err ? err : -1;
@@ -198,23 +198,23 @@
err = mtd_read(mtd, addr, subpgsize, &read, readbuf);
if (unlikely(err || read != subpgsize)) {
if (mtd_is_bitflip(err) && read == subpgsize) {
- printk(PRINT_PREF "ECC correction at %#llx\n",
+ pr_info("ECC correction at %#llx\n",
(long long)addr);
err = 0;
} else {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr);
return err ? err : -1;
}
}
if (unlikely(memcmp(readbuf, writebuf, subpgsize))) {
- printk(PRINT_PREF "error: verify failed at %#llx\n",
+ pr_err("error: verify failed at %#llx\n",
(long long)addr);
- printk(PRINT_PREF "------------- written----------------\n");
+ pr_info("------------- written----------------\n");
print_subpage(writebuf);
- printk(PRINT_PREF "------------- read ------------------\n");
+ pr_info("------------- read ------------------\n");
print_subpage(readbuf);
- printk(PRINT_PREF "-------------------------------------\n");
+ pr_info("-------------------------------------\n");
errcnt += 1;
}
@@ -225,23 +225,23 @@
err = mtd_read(mtd, addr, subpgsize, &read, readbuf);
if (unlikely(err || read != subpgsize)) {
if (mtd_is_bitflip(err) && read == subpgsize) {
- printk(PRINT_PREF "ECC correction at %#llx\n",
+ pr_info("ECC correction at %#llx\n",
(long long)addr);
err = 0;
} else {
- printk(PRINT_PREF "error: read failed at %#llx\n",
+ pr_err("error: read failed at %#llx\n",
(long long)addr);
return err ? err : -1;
}
}
if (unlikely(memcmp(readbuf, writebuf, subpgsize))) {
- printk(PRINT_PREF "error: verify failed at %#llx\n",
+ pr_info("error: verify failed at %#llx\n",
(long long)addr);
- printk(PRINT_PREF "------------- written----------------\n");
+ pr_info("------------- written----------------\n");
print_subpage(writebuf);
- printk(PRINT_PREF "------------- read ------------------\n");
+ pr_info("------------- read ------------------\n");
print_subpage(readbuf);
- printk(PRINT_PREF "-------------------------------------\n");
+ pr_info("-------------------------------------\n");
errcnt += 1;
}
@@ -262,17 +262,17 @@
err = mtd_read(mtd, addr, subpgsize * k, &read, readbuf);
if (unlikely(err || read != subpgsize * k)) {
if (mtd_is_bitflip(err) && read == subpgsize * k) {
- printk(PRINT_PREF "ECC correction at %#llx\n",
+ pr_info("ECC correction at %#llx\n",
(long long)addr);
err = 0;
} else {
- printk(PRINT_PREF "error: read failed at "
+ pr_err("error: read failed at "
"%#llx\n", (long long)addr);
return err ? err : -1;
}
}
if (unlikely(memcmp(readbuf, writebuf, subpgsize * k))) {
- printk(PRINT_PREF "error: verify failed at %#llx\n",
+ pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
}
@@ -295,17 +295,17 @@
err = mtd_read(mtd, addr, subpgsize, &read, readbuf);
if (unlikely(err || read != subpgsize)) {
if (mtd_is_bitflip(err) && read == subpgsize) {
- printk(PRINT_PREF "ECC correction at %#llx\n",
+ pr_info("ECC correction at %#llx\n",
(long long)addr);
err = 0;
} else {
- printk(PRINT_PREF "error: read failed at "
+ pr_err("error: read failed at "
"%#llx\n", (long long)addr);
return err ? err : -1;
}
}
if (unlikely(memcmp(readbuf, writebuf, subpgsize))) {
- printk(PRINT_PREF "error: verify 0xff failed at "
+ pr_err("error: verify 0xff failed at "
"%#llx\n", (long long)addr);
errcnt += 1;
}
@@ -320,7 +320,7 @@
int err;
unsigned int i;
- printk(PRINT_PREF "verifying all eraseblocks for 0xff\n");
+ pr_info("verifying all eraseblocks for 0xff\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
@@ -328,10 +328,10 @@
if (err)
return err;
if (i % 256 == 0)
- printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+ pr_info("verified up to eraseblock %u\n", i);
cond_resched();
}
- printk(PRINT_PREF "verified %u eraseblocks\n", i);
+ pr_info("verified %u eraseblocks\n", i);
return 0;
}
@@ -342,7 +342,7 @@
ret = mtd_block_isbad(mtd, addr);
if (ret)
- printk(PRINT_PREF "block %d is bad\n", ebnum);
+ pr_info("block %d is bad\n", ebnum);
return ret;
}
@@ -352,18 +352,18 @@
bbt = kzalloc(ebcnt, GFP_KERNEL);
if (!bbt) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
return -ENOMEM;
}
- printk(PRINT_PREF "scanning for bad eraseblocks\n");
+ pr_info("scanning for bad eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
bbt[i] = is_block_bad(i) ? 1 : 0;
if (bbt[i])
bad += 1;
cond_resched();
}
- printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
+ pr_info("scanned %d eraseblocks, %d are bad\n", i, bad);
return 0;
}
@@ -377,22 +377,22 @@
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
- printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
- printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
+ pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
- printk(PRINT_PREF "MTD device: %d\n", dev);
+ pr_info("MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
- printk(PRINT_PREF "error: cannot get MTD device\n");
+ pr_err("error: cannot get MTD device\n");
return err;
}
if (mtd->type != MTD_NANDFLASH) {
- printk(PRINT_PREF "this test requires NAND flash\n");
+ pr_info("this test requires NAND flash\n");
goto out;
}
@@ -402,7 +402,7 @@
ebcnt = tmp;
pgcnt = mtd->erasesize / mtd->writesize;
- printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
+ pr_info("MTD device size %llu, eraseblock size %u, "
"page size %u, subpage size %u, count of eraseblocks %u, "
"pages per eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
@@ -412,12 +412,12 @@
bufsize = subpgsize * 32;
writebuf = kmalloc(bufsize, GFP_KERNEL);
if (!writebuf) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_info("error: cannot allocate memory\n");
goto out;
}
readbuf = kmalloc(bufsize, GFP_KERNEL);
if (!readbuf) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_info("error: cannot allocate memory\n");
goto out;
}
@@ -429,7 +429,7 @@
if (err)
goto out;
- printk(PRINT_PREF "writing whole device\n");
+ pr_info("writing whole device\n");
simple_srand(1);
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
@@ -438,13 +438,13 @@
if (unlikely(err))
goto out;
if (i % 256 == 0)
- printk(PRINT_PREF "written up to eraseblock %u\n", i);
+ pr_info("written up to eraseblock %u\n", i);
cond_resched();
}
- printk(PRINT_PREF "written %u eraseblocks\n", i);
+ pr_info("written %u eraseblocks\n", i);
simple_srand(1);
- printk(PRINT_PREF "verifying all eraseblocks\n");
+ pr_info("verifying all eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
@@ -452,10 +452,10 @@
if (unlikely(err))
goto out;
if (i % 256 == 0)
- printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+ pr_info("verified up to eraseblock %u\n", i);
cond_resched();
}
- printk(PRINT_PREF "verified %u eraseblocks\n", i);
+ pr_info("verified %u eraseblocks\n", i);
err = erase_whole_device();
if (err)
@@ -467,7 +467,7 @@
/* Write all eraseblocks */
simple_srand(3);
- printk(PRINT_PREF "writing whole device\n");
+ pr_info("writing whole device\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
@@ -475,14 +475,14 @@
if (unlikely(err))
goto out;
if (i % 256 == 0)
- printk(PRINT_PREF "written up to eraseblock %u\n", i);
+ pr_info("written up to eraseblock %u\n", i);
cond_resched();
}
- printk(PRINT_PREF "written %u eraseblocks\n", i);
+ pr_info("written %u eraseblocks\n", i);
/* Check all eraseblocks */
simple_srand(3);
- printk(PRINT_PREF "verifying all eraseblocks\n");
+ pr_info("verifying all eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
@@ -490,10 +490,10 @@
if (unlikely(err))
goto out;
if (i % 256 == 0)
- printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+ pr_info("verified up to eraseblock %u\n", i);
cond_resched();
}
- printk(PRINT_PREF "verified %u eraseblocks\n", i);
+ pr_info("verified %u eraseblocks\n", i);
err = erase_whole_device();
if (err)
@@ -503,7 +503,7 @@
if (err)
goto out;
- printk(PRINT_PREF "finished with %d errors\n", errcnt);
+ pr_info("finished with %d errors\n", errcnt);
out:
kfree(bbt);
@@ -511,7 +511,7 @@
kfree(writebuf);
put_mtd_device(mtd);
if (err)
- printk(PRINT_PREF "error %d occurred\n", err);
+ pr_info("error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
diff --git a/drivers/mtd/tests/mtd_torturetest.c b/drivers/mtd/tests/mtd_torturetest.c
index b65861b..c4cde1e 100644
--- a/drivers/mtd/tests/mtd_torturetest.c
+++ b/drivers/mtd/tests/mtd_torturetest.c
@@ -23,6 +23,8 @@
* damage caused by this program.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -31,7 +33,6 @@
#include <linux/slab.h>
#include <linux/sched.h>
-#define PRINT_PREF KERN_INFO "mtd_torturetest: "
#define RETRIES 3
static int eb = 8;
@@ -107,12 +108,12 @@
err = mtd_erase(mtd, &ei);
if (err) {
- printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum);
+ pr_err("error %d while erasing EB %d\n", err, ebnum);
return err;
}
if (ei.state == MTD_ERASE_FAILED) {
- printk(PRINT_PREF "some erase error occurred at EB %d\n",
+ pr_err("some erase error occurred at EB %d\n",
ebnum);
return -EIO;
}
@@ -139,40 +140,40 @@
retry:
err = mtd_read(mtd, addr, len, &read, check_buf);
if (mtd_is_bitflip(err))
- printk(PRINT_PREF "single bit flip occurred at EB %d "
+ pr_err("single bit flip occurred at EB %d "
"MTD reported that it was fixed.\n", ebnum);
else if (err) {
- printk(PRINT_PREF "error %d while reading EB %d, "
+ pr_err("error %d while reading EB %d, "
"read %zd\n", err, ebnum, read);
return err;
}
if (read != len) {
- printk(PRINT_PREF "failed to read %zd bytes from EB %d, "
+ pr_err("failed to read %zd bytes from EB %d, "
"read only %zd, but no error reported\n",
len, ebnum, read);
return -EIO;
}
if (memcmp(buf, check_buf, len)) {
- printk(PRINT_PREF "read wrong data from EB %d\n", ebnum);
+ pr_err("read wrong data from EB %d\n", ebnum);
report_corrupt(check_buf, buf);
if (retries++ < RETRIES) {
/* Try read again */
yield();
- printk(PRINT_PREF "re-try reading data from EB %d\n",
+ pr_info("re-try reading data from EB %d\n",
ebnum);
goto retry;
} else {
- printk(PRINT_PREF "retried %d times, still errors, "
+ pr_info("retried %d times, still errors, "
"give-up\n", RETRIES);
return -EINVAL;
}
}
if (retries != 0)
- printk(PRINT_PREF "only attempt number %d was OK (!!!)\n",
+ pr_info("only attempt number %d was OK (!!!)\n",
retries);
return 0;
@@ -191,12 +192,12 @@
}
err = mtd_write(mtd, addr, len, &written, buf);
if (err) {
- printk(PRINT_PREF "error %d while writing EB %d, written %zd"
+ pr_err("error %d while writing EB %d, written %zd"
" bytes\n", err, ebnum, written);
return err;
}
if (written != len) {
- printk(PRINT_PREF "written only %zd bytes of %zd, but no error"
+ pr_info("written only %zd bytes of %zd, but no error"
" reported\n", written, len);
return -EIO;
}
@@ -211,64 +212,64 @@
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
- printk(PRINT_PREF "Warning: this program is trying to wear out your "
+ pr_info("Warning: this program is trying to wear out your "
"flash, stop it if this is not wanted.\n");
if (dev < 0) {
- printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
- printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
+ pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
- printk(PRINT_PREF "MTD device: %d\n", dev);
- printk(PRINT_PREF "torture %d eraseblocks (%d-%d) of mtd%d\n",
+ pr_info("MTD device: %d\n", dev);
+ pr_info("torture %d eraseblocks (%d-%d) of mtd%d\n",
ebcnt, eb, eb + ebcnt - 1, dev);
if (pgcnt)
- printk(PRINT_PREF "torturing just %d pages per eraseblock\n",
+ pr_info("torturing just %d pages per eraseblock\n",
pgcnt);
- printk(PRINT_PREF "write verify %s\n", check ? "enabled" : "disabled");
+ pr_info("write verify %s\n", check ? "enabled" : "disabled");
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
- printk(PRINT_PREF "error: cannot get MTD device\n");
+ pr_err("error: cannot get MTD device\n");
return err;
}
if (mtd->writesize == 1) {
- printk(PRINT_PREF "not NAND flash, assume page size is 512 "
+ pr_info("not NAND flash, assume page size is 512 "
"bytes.\n");
pgsize = 512;
} else
pgsize = mtd->writesize;
if (pgcnt && (pgcnt > mtd->erasesize / pgsize || pgcnt < 0)) {
- printk(PRINT_PREF "error: invalid pgcnt value %d\n", pgcnt);
+ pr_err("error: invalid pgcnt value %d\n", pgcnt);
goto out_mtd;
}
err = -ENOMEM;
patt_5A5 = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!patt_5A5) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
goto out_mtd;
}
patt_A5A = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!patt_A5A) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
goto out_patt_5A5;
}
patt_FF = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!patt_FF) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
goto out_patt_A5A;
}
check_buf = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!check_buf) {
- printk(PRINT_PREF "error: cannot allocate memory\n");
+ pr_err("error: cannot allocate memory\n");
goto out_patt_FF;
}
@@ -295,13 +296,13 @@
err = mtd_block_isbad(mtd, (loff_t)i * mtd->erasesize);
if (err < 0) {
- printk(PRINT_PREF "block_isbad() returned %d "
+ pr_info("block_isbad() returned %d "
"for EB %d\n", err, i);
goto out;
}
if (err) {
- printk("EB %d is bad. Skip it.\n", i);
+ pr_err("EB %d is bad. Skip it.\n", i);
bad_ebs[i - eb] = 1;
}
}
@@ -329,7 +330,7 @@
continue;
err = check_eraseblock(i, patt_FF);
if (err) {
- printk(PRINT_PREF "verify failed"
+ pr_info("verify failed"
" for 0xFF... pattern\n");
goto out;
}
@@ -362,7 +363,7 @@
patt = patt_A5A;
err = check_eraseblock(i, patt);
if (err) {
- printk(PRINT_PREF "verify failed for %s"
+ pr_info("verify failed for %s"
" pattern\n",
((eb + erase_cycles) & 1) ?
"0x55AA55..." : "0xAA55AA...");
@@ -380,7 +381,7 @@
stop_timing();
ms = (finish.tv_sec - start.tv_sec) * 1000 +
(finish.tv_usec - start.tv_usec) / 1000;
- printk(PRINT_PREF "%08u erase cycles done, took %lu "
+ pr_info("%08u erase cycles done, took %lu "
"milliseconds (%lu seconds)\n",
erase_cycles, ms, ms / 1000);
start_timing();
@@ -391,7 +392,7 @@
}
out:
- printk(PRINT_PREF "finished after %u erase cycles\n",
+ pr_info("finished after %u erase cycles\n",
erase_cycles);
kfree(check_buf);
out_patt_FF:
@@ -403,7 +404,7 @@
out_mtd:
put_mtd_device(mtd);
if (err)
- printk(PRINT_PREF "error %d occurred during torturing\n", err);
+ pr_info("error %d occurred during torturing\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
@@ -441,9 +442,9 @@
&bits) >= 0)
pages++;
- printk(PRINT_PREF "verify fails on %d pages, %d bytes/%d bits\n",
+ pr_info("verify fails on %d pages, %d bytes/%d bits\n",
pages, bytes, bits);
- printk(PRINT_PREF "The following is a list of all differences between"
+ pr_info("The following is a list of all differences between"
" what was read from flash and what was expected\n");
for (i = 0; i < check_len; i += pgsize) {
@@ -457,7 +458,7 @@
printk("-------------------------------------------------------"
"----------------------------------\n");
- printk(PRINT_PREF "Page %zd has %d bytes/%d bits failing verify,"
+ pr_info("Page %zd has %d bytes/%d bits failing verify,"
" starting at offset 0x%x\n",
(mtd->erasesize - check_len + i) / pgsize,
bytes, bits, first);
diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index adb3a4b..6ba047f 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -239,44 +239,37 @@
int uV;
/* If there is no battery, it cannot be charged */
- if (!is_batt_present(cm)) {
- val.intval = 0;
- goto out;
- }
+ if (!is_batt_present(cm))
+ return false;
if (cm->fuel_gauge && desc->fullbatt_full_capacity > 0) {
+ val.intval = 0;
+
/* Not full if capacity of fuel gauge isn't full */
ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
POWER_SUPPLY_PROP_CHARGE_FULL, &val);
- if (!ret && val.intval > desc->fullbatt_full_capacity) {
- val.intval = 1;
- goto out;
- }
+ if (!ret && val.intval > desc->fullbatt_full_capacity)
+ return true;
}
/* Full, if it's over the fullbatt voltage */
if (desc->fullbatt_uV > 0) {
ret = get_batt_uV(cm, &uV);
- if (!ret && uV >= desc->fullbatt_uV) {
- val.intval = 1;
- goto out;
- }
+ if (!ret && uV >= desc->fullbatt_uV)
+ return true;
}
/* Full, if the capacity is more than fullbatt_soc */
if (cm->fuel_gauge && desc->fullbatt_soc > 0) {
+ val.intval = 0;
+
ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
POWER_SUPPLY_PROP_CAPACITY, &val);
- if (!ret && val.intval >= desc->fullbatt_soc) {
- val.intval = 1;
- goto out;
- }
+ if (!ret && val.intval >= desc->fullbatt_soc)
+ return true;
}
- val.intval = 0;
-
-out:
- return val.intval ? true : false;
+ return false;
}
/**
@@ -489,8 +482,9 @@
return;
}
- diff = desc->fullbatt_uV;
- diff -= batt_uV;
+ diff = desc->fullbatt_uV - batt_uV;
+ if (diff < 0)
+ return;
dev_info(cm->dev, "VBATT dropped %duV after full-batt.\n", diff);
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index ed81720..e513cd9 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -112,6 +112,17 @@
To compile this driver as a module, choose M here: the module
will be called pwm-samsung.
+config PWM_SPEAR
+ tristate "STMicroelectronics SPEAr PWM support"
+ depends on PLAT_SPEAR
+ depends on OF
+ help
+ Generic PWM framework driver for the PWM controller on ST
+ SPEAr SoCs.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-spear.
+
config PWM_TEGRA
tristate "NVIDIA Tegra PWM support"
depends on ARCH_TEGRA
@@ -125,6 +136,7 @@
config PWM_TIECAP
tristate "ECAP PWM support"
depends on SOC_AM33XX
+ select PWM_TIPWMSS
help
PWM driver support for the ECAP APWM controller found on AM33XX
TI SOC
@@ -135,6 +147,7 @@
config PWM_TIEHRPWM
tristate "EHRPWM PWM support"
depends on SOC_AM33XX
+ select PWM_TIPWMSS
help
PWM driver support for the EHRPWM controller found on AM33XX
TI SOC
@@ -142,14 +155,32 @@
To compile this driver as a module, choose M here: the module
will be called pwm-tiehrpwm.
-config PWM_TWL6030
- tristate "TWL6030 PWM support"
+config PWM_TIPWMSS
+ bool
+ depends on SOC_AM33XX && (PWM_TIEHRPWM || PWM_TIECAP)
+ help
+ PWM Subsystem driver support for AM33xx SOC.
+
+ PWM submodules require PWM config space access from submodule
+ drivers and require common parent driver support.
+
+config PWM_TWL
+ tristate "TWL4030/6030 PWM support"
depends on TWL4030_CORE
help
- Generic PWM framework driver for TWL6030.
+ Generic PWM framework driver for TWL4030/6030.
To compile this driver as a module, choose M here: the module
- will be called pwm-twl6030.
+ will be called pwm-twl.
+
+config PWM_TWL_LED
+ tristate "TWL4030/6030 PWM support for LED drivers"
+ depends on TWL4030_CORE
+ help
+ Generic PWM framework driver for TWL4030/6030 LED terminals.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-twl-led.
config PWM_VT8500
tristate "vt8500 pwm support"
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index acfe482..62a2963 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -8,8 +8,11 @@
obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o
obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
+obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o
obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o
-obj-$(CONFIG_PWM_TWL6030) += pwm-twl6030.o
+obj-$(CONFIG_PWM_TIPWMSS) += pwm-tipwmss.o
+obj-$(CONFIG_PWM_TWL) += pwm-twl.o
+obj-$(CONFIG_PWM_TWL_LED) += pwm-twl-led.o
obj-$(CONFIG_PWM_VT8500) += pwm-vt8500.o
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index f5acdaa..903138b 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -32,6 +32,9 @@
#define MAX_PWMS 1024
+/* flags in the third cell of the DT PWM specifier */
+#define PWM_SPEC_POLARITY (1 << 0)
+
static DEFINE_MUTEX(pwm_lookup_lock);
static LIST_HEAD(pwm_lookup_list);
static DEFINE_MUTEX(pwm_lock);
@@ -129,6 +132,32 @@
return 0;
}
+struct pwm_device *
+of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
+{
+ struct pwm_device *pwm;
+
+ if (pc->of_pwm_n_cells < 3)
+ return ERR_PTR(-EINVAL);
+
+ if (args->args[0] >= pc->npwm)
+ return ERR_PTR(-EINVAL);
+
+ pwm = pwm_request_from_chip(pc, args->args[0], NULL);
+ if (IS_ERR(pwm))
+ return pwm;
+
+ pwm_set_period(pwm, args->args[1]);
+
+ if (args->args[2] & PWM_SPEC_POLARITY)
+ pwm_set_polarity(pwm, PWM_POLARITY_INVERSED);
+ else
+ pwm_set_polarity(pwm, PWM_POLARITY_NORMAL);
+
+ return pwm;
+}
+EXPORT_SYMBOL_GPL(of_pwm_xlate_with_flags);
+
static struct pwm_device *
of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
{
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index 8f26e9f..65a86bd 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -235,7 +235,7 @@
{
const struct of_device_id *of_id =
of_match_device(imx_pwm_dt_ids, &pdev->dev);
- struct imx_pwm_data *data;
+ const struct imx_pwm_data *data;
struct imx_chip *imx;
struct resource *r;
int ret = 0;
diff --git a/drivers/pwm/pwm-lpc32xx.c b/drivers/pwm/pwm-lpc32xx.c
index 015a822..1410644 100644
--- a/drivers/pwm/pwm-lpc32xx.c
+++ b/drivers/pwm/pwm-lpc32xx.c
@@ -49,9 +49,24 @@
c = 0; /* 0 set division by 256 */
period_cycles = c;
+ /* The duty-cycle value is as follows:
+ *
+ * DUTY-CYCLE HIGH LEVEL
+ * 1 99.9%
+ * 25 90.0%
+ * 128 50.0%
+ * 220 10.0%
+ * 255 0.1%
+ * 0 0.0%
+ *
+ * In other words, the register value is duty-cycle % 256 with
+ * duty-cycle in the range 1-256.
+ */
c = 256 * duty_ns;
do_div(c, period_ns);
- duty_cycles = c;
+ if (c > 255)
+ c = 255;
+ duty_cycles = 256 - c;
writel(PWM_ENABLE | PWM_RELOADV(period_cycles) | PWM_DUTY(duty_cycles),
lpc32xx->base + (pwm->hwpwm << 2));
@@ -106,6 +121,7 @@
lpc32xx->chip.dev = &pdev->dev;
lpc32xx->chip.ops = &lpc32xx_pwm_ops;
lpc32xx->chip.npwm = 2;
+ lpc32xx->chip.base = -1;
ret = pwmchip_add(&lpc32xx->chip);
if (ret < 0) {
@@ -121,8 +137,11 @@
static int lpc32xx_pwm_remove(struct platform_device *pdev)
{
struct lpc32xx_pwm_chip *lpc32xx = platform_get_drvdata(pdev);
+ unsigned int i;
- clk_disable(lpc32xx->clk);
+ for (i = 0; i < lpc32xx->chip.npwm; i++)
+ pwm_disable(&lpc32xx->chip.pwms[i]);
+
return pwmchip_remove(&lpc32xx->chip);
}
diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c
index e9b15d0..5207e6c 100644
--- a/drivers/pwm/pwm-samsung.c
+++ b/drivers/pwm/pwm-samsung.c
@@ -222,6 +222,7 @@
/* calculate base of control bits in TCON */
s3c->tcon_base = id == 0 ? 0 : (id * 4) + 4;
+ s3c->pwm_id = id;
s3c->chip.dev = &pdev->dev;
s3c->chip.ops = &s3c_pwm_ops;
s3c->chip.base = -1;
diff --git a/drivers/pwm/pwm-spear.c b/drivers/pwm/pwm-spear.c
new file mode 100644
index 0000000..83b21d9
--- /dev/null
+++ b/drivers/pwm/pwm-spear.c
@@ -0,0 +1,276 @@
+/*
+ * ST Microelectronics SPEAr Pulse Width Modulator driver
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define NUM_PWM 4
+
+/* PWM registers and bits definitions */
+#define PWMCR 0x00 /* Control Register */
+#define PWMCR_PWM_ENABLE 0x1
+#define PWMCR_PRESCALE_SHIFT 2
+#define PWMCR_MIN_PRESCALE 0x00
+#define PWMCR_MAX_PRESCALE 0x3FFF
+
+#define PWMDCR 0x04 /* Duty Cycle Register */
+#define PWMDCR_MIN_DUTY 0x0001
+#define PWMDCR_MAX_DUTY 0xFFFF
+
+#define PWMPCR 0x08 /* Period Register */
+#define PWMPCR_MIN_PERIOD 0x0001
+#define PWMPCR_MAX_PERIOD 0xFFFF
+
+/* Following only available on 13xx SoCs */
+#define PWMMCR 0x3C /* Master Control Register */
+#define PWMMCR_PWM_ENABLE 0x1
+
+/**
+ * struct spear_pwm_chip - struct representing pwm chip
+ *
+ * @mmio_base: base address of pwm chip
+ * @clk: pointer to clk structure of pwm chip
+ * @chip: linux pwm chip representation
+ * @dev: pointer to device structure of pwm chip
+ */
+struct spear_pwm_chip {
+ void __iomem *mmio_base;
+ struct clk *clk;
+ struct pwm_chip chip;
+ struct device *dev;
+};
+
+static inline struct spear_pwm_chip *to_spear_pwm_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct spear_pwm_chip, chip);
+}
+
+static inline u32 spear_pwm_readl(struct spear_pwm_chip *chip, unsigned int num,
+ unsigned long offset)
+{
+ return readl_relaxed(chip->mmio_base + (num << 4) + offset);
+}
+
+static inline void spear_pwm_writel(struct spear_pwm_chip *chip,
+ unsigned int num, unsigned long offset,
+ unsigned long val)
+{
+ writel_relaxed(val, chip->mmio_base + (num << 4) + offset);
+}
+
+static int spear_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
+ u64 val, div, clk_rate;
+ unsigned long prescale = PWMCR_MIN_PRESCALE, pv, dc;
+ int ret;
+
+ /*
+ * Find pv, dc and prescale to suit duty_ns and period_ns. This is done
+ * according to formulas described below:
+ *
+ * period_ns = 10^9 * (PRESCALE + 1) * PV / PWM_CLK_RATE
+ * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ *
+ * PV = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
+ * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
+ */
+ clk_rate = clk_get_rate(pc->clk);
+ while (1) {
+ div = 1000000000;
+ div *= 1 + prescale;
+ val = clk_rate * period_ns;
+ pv = div64_u64(val, div);
+ val = clk_rate * duty_ns;
+ dc = div64_u64(val, div);
+
+ /* if duty_ns and period_ns are not achievable then return */
+ if (pv < PWMPCR_MIN_PERIOD || dc < PWMDCR_MIN_DUTY)
+ return -EINVAL;
+
+ /*
+ * if pv and dc have crossed their upper limit, then increase
+ * prescale and recalculate pv and dc.
+ */
+ if (pv > PWMPCR_MAX_PERIOD || dc > PWMDCR_MAX_DUTY) {
+ if (++prescale > PWMCR_MAX_PRESCALE)
+ return -EINVAL;
+ continue;
+ }
+ break;
+ }
+
+ /*
+ * NOTE: the clock to PWM has to be enabled first before writing to the
+ * registers.
+ */
+ ret = clk_enable(pc->clk);
+ if (ret)
+ return ret;
+
+ spear_pwm_writel(pc, pwm->hwpwm, PWMCR,
+ prescale << PWMCR_PRESCALE_SHIFT);
+ spear_pwm_writel(pc, pwm->hwpwm, PWMDCR, dc);
+ spear_pwm_writel(pc, pwm->hwpwm, PWMPCR, pv);
+ clk_disable(pc->clk);
+
+ return 0;
+}
+
+static int spear_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
+ int rc = 0;
+ u32 val;
+
+ rc = clk_enable(pc->clk);
+ if (!rc)
+ return rc;
+
+ val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
+ val |= PWMCR_PWM_ENABLE;
+ spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
+
+ return 0;
+}
+
+static void spear_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
+ u32 val;
+
+ val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
+ val &= ~PWMCR_PWM_ENABLE;
+ spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
+
+ clk_disable(pc->clk);
+}
+
+static const struct pwm_ops spear_pwm_ops = {
+ .config = spear_pwm_config,
+ .enable = spear_pwm_enable,
+ .disable = spear_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int spear_pwm_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct spear_pwm_chip *pc;
+ struct resource *r;
+ int ret;
+ u32 val;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no memory resources defined\n");
+ return -ENODEV;
+ }
+
+ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r);
+ if (!pc->mmio_base)
+ return -EADDRNOTAVAIL;
+
+ pc->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pc->clk))
+ return PTR_ERR(pc->clk);
+
+ pc->dev = &pdev->dev;
+ platform_set_drvdata(pdev, pc);
+
+ pc->chip.dev = &pdev->dev;
+ pc->chip.ops = &spear_pwm_ops;
+ pc->chip.base = -1;
+ pc->chip.npwm = NUM_PWM;
+
+ ret = clk_prepare(pc->clk);
+ if (!ret)
+ return ret;
+
+ if (of_device_is_compatible(np, "st,spear1340-pwm")) {
+ ret = clk_enable(pc->clk);
+ if (!ret) {
+ clk_unprepare(pc->clk);
+ return ret;
+ }
+ /*
+ * Following enables PWM chip, channels would still be
+ * enabled individually through their control register
+ */
+ val = readl_relaxed(pc->mmio_base + PWMMCR);
+ val |= PWMMCR_PWM_ENABLE;
+ writel_relaxed(val, pc->mmio_base + PWMMCR);
+
+ clk_disable(pc->clk);
+ }
+
+ ret = pwmchip_add(&pc->chip);
+ if (!ret) {
+ clk_unprepare(pc->clk);
+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+ }
+
+ return ret;
+}
+
+static int spear_pwm_remove(struct platform_device *pdev)
+{
+ struct spear_pwm_chip *pc = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < NUM_PWM; i++)
+ pwm_disable(&pc->chip.pwms[i]);
+
+ /* clk was prepared in probe, hence unprepare it here */
+ clk_unprepare(pc->clk);
+ return pwmchip_remove(&pc->chip);
+}
+
+static struct of_device_id spear_pwm_of_match[] = {
+ { .compatible = "st,spear320-pwm" },
+ { .compatible = "st,spear1340-pwm" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, spear_pwm_of_match);
+
+static struct platform_driver spear_pwm_driver = {
+ .driver = {
+ .name = "spear-pwm",
+ .of_match_table = spear_pwm_of_match,
+ },
+ .probe = spear_pwm_probe,
+ .remove = spear_pwm_remove,
+};
+
+module_platform_driver(spear_pwm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Shiraz Hashim <shiraz.hashim@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.com>");
+MODULE_ALIAS("platform:spear-pwm");
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index 87c091b..5cf016d 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -25,6 +25,10 @@
#include <linux/clk.h>
#include <linux/pm_runtime.h>
#include <linux/pwm.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+
+#include "pwm-tipwmss.h"
/* ECAP registers and bits definitions */
#define CAP1 0x08
@@ -184,12 +188,24 @@
.owner = THIS_MODULE,
};
+static const struct of_device_id ecap_of_match[] = {
+ { .compatible = "ti,am33xx-ecap" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ecap_of_match);
+
static int ecap_pwm_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
struct clk *clk;
struct ecap_pwm_chip *pc;
+ u16 status;
+ struct pinctrl *pinctrl;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&pdev->dev, "unable to select pin group\n");
pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
if (!pc) {
@@ -211,6 +227,8 @@
pc->chip.dev = &pdev->dev;
pc->chip.ops = &ecap_pwm_ops;
+ pc->chip.of_xlate = of_pwm_xlate_with_flags;
+ pc->chip.of_pwm_n_cells = 3;
pc->chip.base = -1;
pc->chip.npwm = 1;
@@ -231,14 +249,40 @@
}
pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+
+ status = pwmss_submodule_state_change(pdev->dev.parent,
+ PWMSS_ECAPCLK_EN);
+ if (!(status & PWMSS_ECAPCLK_EN_ACK)) {
+ dev_err(&pdev->dev, "PWMSS config space clock enable failed\n");
+ ret = -EINVAL;
+ goto pwmss_clk_failure;
+ }
+
+ pm_runtime_put_sync(&pdev->dev);
+
platform_set_drvdata(pdev, pc);
return 0;
+
+pwmss_clk_failure:
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pwmchip_remove(&pc->chip);
+ return ret;
}
static int ecap_pwm_remove(struct platform_device *pdev)
{
struct ecap_pwm_chip *pc = platform_get_drvdata(pdev);
+ pm_runtime_get_sync(&pdev->dev);
+ /*
+ * Due to hardware misbehaviour, acknowledge of the stop_req
+ * is missing. Hence checking of the status bit skipped.
+ */
+ pwmss_submodule_state_change(pdev->dev.parent, PWMSS_ECAPCLK_STOP_REQ);
+ pm_runtime_put_sync(&pdev->dev);
+
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return pwmchip_remove(&pc->chip);
@@ -246,7 +290,9 @@
static struct platform_driver ecap_pwm_driver = {
.driver = {
- .name = "ecap",
+ .name = "ecap",
+ .owner = THIS_MODULE,
+ .of_match_table = ecap_of_match,
},
.probe = ecap_pwm_probe,
.remove = ecap_pwm_remove,
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index 9ffd389..72a6dd4 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -25,6 +25,10 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/pm_runtime.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+
+#include "pwm-tipwmss.h"
/* EHRPWM registers and bits definitions */
@@ -115,6 +119,7 @@
void __iomem *mmio_base;
unsigned long period_cycles[NUM_PWM_CHANNEL];
enum pwm_polarity polarity[NUM_PWM_CHANNEL];
+ struct clk *tbclk;
};
static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
@@ -335,6 +340,9 @@
/* Channels polarity can be configured from action qualifier module */
configure_polarity(pc, pwm->hwpwm);
+ /* Enable TBCLK before enabling PWM device */
+ clk_enable(pc->tbclk);
+
/* Enable time counter for free_run */
ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN);
return 0;
@@ -363,6 +371,9 @@
ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
+ /* Disabling TBCLK on PWM disable */
+ clk_disable(pc->tbclk);
+
/* Stop Time base counter */
ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_STOP_NEXT);
@@ -392,12 +403,24 @@
.owner = THIS_MODULE,
};
+static const struct of_device_id ehrpwm_of_match[] = {
+ { .compatible = "ti,am33xx-ehrpwm" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ehrpwm_of_match);
+
static int ehrpwm_pwm_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
struct clk *clk;
struct ehrpwm_pwm_chip *pc;
+ u16 status;
+ struct pinctrl *pinctrl;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&pdev->dev, "unable to select pin group\n");
pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
if (!pc) {
@@ -419,6 +442,8 @@
pc->chip.dev = &pdev->dev;
pc->chip.ops = &ehrpwm_pwm_ops;
+ pc->chip.of_xlate = of_pwm_xlate_with_flags;
+ pc->chip.of_pwm_n_cells = 3;
pc->chip.base = -1;
pc->chip.npwm = NUM_PWM_CHANNEL;
@@ -432,6 +457,13 @@
if (!pc->mmio_base)
return -EADDRNOTAVAIL;
+ /* Acquire tbclk for Time Base EHRPWM submodule */
+ pc->tbclk = devm_clk_get(&pdev->dev, "tbclk");
+ if (IS_ERR(pc->tbclk)) {
+ dev_err(&pdev->dev, "Failed to get tbclk\n");
+ return PTR_ERR(pc->tbclk);
+ }
+
ret = pwmchip_add(&pc->chip);
if (ret < 0) {
dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
@@ -439,14 +471,40 @@
}
pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+
+ status = pwmss_submodule_state_change(pdev->dev.parent,
+ PWMSS_EPWMCLK_EN);
+ if (!(status & PWMSS_EPWMCLK_EN_ACK)) {
+ dev_err(&pdev->dev, "PWMSS config space clock enable failed\n");
+ ret = -EINVAL;
+ goto pwmss_clk_failure;
+ }
+
+ pm_runtime_put_sync(&pdev->dev);
+
platform_set_drvdata(pdev, pc);
return 0;
+
+pwmss_clk_failure:
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pwmchip_remove(&pc->chip);
+ return ret;
}
static int ehrpwm_pwm_remove(struct platform_device *pdev)
{
struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev);
+ pm_runtime_get_sync(&pdev->dev);
+ /*
+ * Due to hardware misbehaviour, acknowledge of the stop_req
+ * is missing. Hence checking of the status bit skipped.
+ */
+ pwmss_submodule_state_change(pdev->dev.parent, PWMSS_EPWMCLK_STOP_REQ);
+ pm_runtime_put_sync(&pdev->dev);
+
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return pwmchip_remove(&pc->chip);
@@ -454,7 +512,9 @@
static struct platform_driver ehrpwm_pwm_driver = {
.driver = {
- .name = "ehrpwm",
+ .name = "ehrpwm",
+ .owner = THIS_MODULE,
+ .of_match_table = ehrpwm_of_match,
},
.probe = ehrpwm_pwm_probe,
.remove = ehrpwm_pwm_remove,
diff --git a/drivers/pwm/pwm-tipwmss.c b/drivers/pwm/pwm-tipwmss.c
new file mode 100644
index 0000000..3448a1c88
--- /dev/null
+++ b/drivers/pwm/pwm-tipwmss.c
@@ -0,0 +1,139 @@
+/*
+ * TI PWM Subsystem driver
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/of_device.h>
+
+#include "pwm-tipwmss.h"
+
+#define PWMSS_CLKCONFIG 0x8 /* Clock gating reg */
+#define PWMSS_CLKSTATUS 0xc /* Clock gating status reg */
+
+struct pwmss_info {
+ void __iomem *mmio_base;
+ struct mutex pwmss_lock;
+ u16 pwmss_clkconfig;
+};
+
+u16 pwmss_submodule_state_change(struct device *dev, int set)
+{
+ struct pwmss_info *info = dev_get_drvdata(dev);
+ u16 val;
+
+ mutex_lock(&info->pwmss_lock);
+ val = readw(info->mmio_base + PWMSS_CLKCONFIG);
+ val |= set;
+ writew(val , info->mmio_base + PWMSS_CLKCONFIG);
+ mutex_unlock(&info->pwmss_lock);
+
+ return readw(info->mmio_base + PWMSS_CLKSTATUS);
+}
+EXPORT_SYMBOL(pwmss_submodule_state_change);
+
+static const struct of_device_id pwmss_of_match[] = {
+ { .compatible = "ti,am33xx-pwmss" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pwmss_of_match);
+
+static int pwmss_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct resource *r;
+ struct pwmss_info *info;
+ struct device_node *node = pdev->dev.of_node;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ mutex_init(&info->pwmss_lock);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ return -ENODEV;
+ }
+
+ info->mmio_base = devm_request_and_ioremap(&pdev->dev, r);
+ if (!info->mmio_base)
+ return -EADDRNOTAVAIL;
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+ platform_set_drvdata(pdev, info);
+
+ /* Populate all the child nodes here... */
+ ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
+ if (ret)
+ dev_err(&pdev->dev, "no child node found\n");
+
+ return ret;
+}
+
+static int pwmss_remove(struct platform_device *pdev)
+{
+ struct pwmss_info *info = platform_get_drvdata(pdev);
+
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ mutex_destroy(&info->pwmss_lock);
+ return 0;
+}
+
+static int pwmss_suspend(struct device *dev)
+{
+ struct pwmss_info *info = dev_get_drvdata(dev);
+
+ info->pwmss_clkconfig = readw(info->mmio_base + PWMSS_CLKCONFIG);
+ pm_runtime_put_sync(dev);
+ return 0;
+}
+
+static int pwmss_resume(struct device *dev)
+{
+ struct pwmss_info *info = dev_get_drvdata(dev);
+
+ pm_runtime_get_sync(dev);
+ writew(info->pwmss_clkconfig, info->mmio_base + PWMSS_CLKCONFIG);
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pwmss_pm_ops, pwmss_suspend, pwmss_resume);
+
+static struct platform_driver pwmss_driver = {
+ .driver = {
+ .name = "pwmss",
+ .owner = THIS_MODULE,
+ .pm = &pwmss_pm_ops,
+ .of_match_table = pwmss_of_match,
+ },
+ .probe = pwmss_probe,
+ .remove = pwmss_remove,
+};
+
+module_platform_driver(pwmss_driver);
+
+MODULE_DESCRIPTION("PWM Subsystem driver");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-tipwmss.h b/drivers/pwm/pwm-tipwmss.h
new file mode 100644
index 0000000..11f76a1
--- /dev/null
+++ b/drivers/pwm/pwm-tipwmss.h
@@ -0,0 +1,39 @@
+/*
+ * TI PWM Subsystem driver
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __TIPWMSS_H
+#define __TIPWMSS_H
+
+#ifdef CONFIG_PWM_TIPWMSS
+/* PWM substem clock gating */
+#define PWMSS_ECAPCLK_EN BIT(0)
+#define PWMSS_ECAPCLK_STOP_REQ BIT(1)
+#define PWMSS_EPWMCLK_EN BIT(8)
+#define PWMSS_EPWMCLK_STOP_REQ BIT(9)
+
+#define PWMSS_ECAPCLK_EN_ACK BIT(0)
+#define PWMSS_EPWMCLK_EN_ACK BIT(8)
+
+extern u16 pwmss_submodule_state_change(struct device *dev, int set);
+#else
+static inline u16 pwmss_submodule_state_change(struct device *dev, int set)
+{
+ /* return success status value */
+ return 0xFFFF;
+}
+#endif
+#endif /* __TIPWMSS_H */
diff --git a/drivers/pwm/pwm-twl-led.c b/drivers/pwm/pwm-twl-led.c
new file mode 100644
index 0000000..9dfa0f3
--- /dev/null
+++ b/drivers/pwm/pwm-twl-led.c
@@ -0,0 +1,344 @@
+/*
+ * Driver for TWL4030/6030 Pulse Width Modulator used as LED driver
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * This driver is a complete rewrite of the former pwm-twl6030.c authorded by:
+ * Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/i2c/twl.h>
+#include <linux/slab.h>
+
+/*
+ * This driver handles the PWM driven LED terminals of TWL4030 and TWL6030.
+ * To generate the signal on TWL4030:
+ * - LEDA uses PWMA
+ * - LEDB uses PWMB
+ * TWL6030 has one LED pin with dedicated LEDPWM
+ */
+
+#define TWL4030_LED_MAX 0x7f
+#define TWL6030_LED_MAX 0xff
+
+/* Registers, bits and macro for TWL4030 */
+#define TWL4030_LEDEN_REG 0x00
+#define TWL4030_PWMA_REG 0x01
+
+#define TWL4030_LEDXON (1 << 0)
+#define TWL4030_LEDXPWM (1 << 4)
+#define TWL4030_LED_PINS (TWL4030_LEDXON | TWL4030_LEDXPWM)
+#define TWL4030_LED_TOGGLE(led, x) ((x) << (led))
+
+/* Register, bits and macro for TWL6030 */
+#define TWL6030_LED_PWM_CTRL1 0xf4
+#define TWL6030_LED_PWM_CTRL2 0xf5
+
+#define TWL6040_LED_MODE_HW 0x00
+#define TWL6040_LED_MODE_ON 0x01
+#define TWL6040_LED_MODE_OFF 0x02
+#define TWL6040_LED_MODE_MASK 0x03
+
+struct twl_pwmled_chip {
+ struct pwm_chip chip;
+ struct mutex mutex;
+};
+
+static inline struct twl_pwmled_chip *to_twl(struct pwm_chip *chip)
+{
+ return container_of(chip, struct twl_pwmled_chip, chip);
+}
+
+static int twl4030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ int duty_cycle = DIV_ROUND_UP(duty_ns * TWL4030_LED_MAX, period_ns) + 1;
+ u8 pwm_config[2] = { 1, 0 };
+ int base, ret;
+
+ /*
+ * To configure the duty period:
+ * On-cycle is set to 1 (the minimum allowed value)
+ * The off time of 0 is not configurable, so the mapping is:
+ * 0 -> off cycle = 2,
+ * 1 -> off cycle = 2,
+ * 2 -> off cycle = 3,
+ * 126 - > off cycle 127,
+ * 127 - > off cycle 1
+ * When on cycle == off cycle the PWM will be always on
+ */
+ if (duty_cycle == 1)
+ duty_cycle = 2;
+ else if (duty_cycle > TWL4030_LED_MAX)
+ duty_cycle = 1;
+
+ base = pwm->hwpwm * 2 + TWL4030_PWMA_REG;
+
+ pwm_config[1] = duty_cycle;
+
+ ret = twl_i2c_write(TWL4030_MODULE_LED, pwm_config, base, 2);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
+
+ return ret;
+}
+
+static int twl4030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwmled_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
+ goto out;
+ }
+
+ val |= TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+ return ret;
+}
+
+static void twl4030_pwmled_disable(struct pwm_chip *chip,
+ struct pwm_device *pwm)
+{
+ struct twl_pwmled_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
+ goto out;
+ }
+
+ val &= ~TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+}
+
+static int twl6030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ int duty_cycle = (duty_ns * TWL6030_LED_MAX) / period_ns;
+ u8 on_time;
+ int ret;
+
+ on_time = duty_cycle & 0xff;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, on_time,
+ TWL6030_LED_PWM_CTRL1);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
+
+ return ret;
+}
+
+static int twl6030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwmled_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+ pwm->label);
+ goto out;
+ }
+
+ val &= ~TWL6040_LED_MODE_MASK;
+ val |= TWL6040_LED_MODE_ON;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+ return ret;
+}
+
+static void twl6030_pwmled_disable(struct pwm_chip *chip,
+ struct pwm_device *pwm)
+{
+ struct twl_pwmled_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+ pwm->label);
+ goto out;
+ }
+
+ val &= ~TWL6040_LED_MODE_MASK;
+ val |= TWL6040_LED_MODE_OFF;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+}
+
+static int twl6030_pwmled_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwmled_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+ pwm->label);
+ goto out;
+ }
+
+ val &= ~TWL6040_LED_MODE_MASK;
+ val |= TWL6040_LED_MODE_OFF;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+ return ret;
+}
+
+static void twl6030_pwmled_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwmled_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+ pwm->label);
+ goto out;
+ }
+
+ val &= ~TWL6040_LED_MODE_MASK;
+ val |= TWL6040_LED_MODE_HW;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+}
+
+static const struct pwm_ops twl4030_pwmled_ops = {
+ .enable = twl4030_pwmled_enable,
+ .disable = twl4030_pwmled_disable,
+ .config = twl4030_pwmled_config,
+};
+
+static const struct pwm_ops twl6030_pwmled_ops = {
+ .enable = twl6030_pwmled_enable,
+ .disable = twl6030_pwmled_disable,
+ .config = twl6030_pwmled_config,
+ .request = twl6030_pwmled_request,
+ .free = twl6030_pwmled_free,
+};
+
+static int twl_pwmled_probe(struct platform_device *pdev)
+{
+ struct twl_pwmled_chip *twl;
+ int ret;
+
+ twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
+ if (!twl)
+ return -ENOMEM;
+
+ if (twl_class_is_4030()) {
+ twl->chip.ops = &twl4030_pwmled_ops;
+ twl->chip.npwm = 2;
+ } else {
+ twl->chip.ops = &twl6030_pwmled_ops;
+ twl->chip.npwm = 1;
+ }
+
+ twl->chip.dev = &pdev->dev;
+ twl->chip.base = -1;
+
+ mutex_init(&twl->mutex);
+
+ ret = pwmchip_add(&twl->chip);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, twl);
+
+ return 0;
+}
+
+static int twl_pwmled_remove(struct platform_device *pdev)
+{
+ struct twl_pwmled_chip *twl = platform_get_drvdata(pdev);
+
+ return pwmchip_remove(&twl->chip);
+}
+
+#ifdef CONFIG_OF
+static struct of_device_id twl_pwmled_of_match[] = {
+ { .compatible = "ti,twl4030-pwmled" },
+ { .compatible = "ti,twl6030-pwmled" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, twl_pwmled_of_match);
+#endif
+
+static struct platform_driver twl_pwmled_driver = {
+ .driver = {
+ .name = "twl-pwmled",
+ .of_match_table = of_match_ptr(twl_pwmled_of_match),
+ },
+ .probe = twl_pwmled_probe,
+ .remove = twl_pwmled_remove,
+};
+module_platform_driver(twl_pwmled_driver);
+
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
+MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030 LED outputs");
+MODULE_ALIAS("platform:twl-pwmled");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-twl.c b/drivers/pwm/pwm-twl.c
new file mode 100644
index 0000000..e65db95
--- /dev/null
+++ b/drivers/pwm/pwm-twl.c
@@ -0,0 +1,359 @@
+/*
+ * Driver for TWL4030/6030 Generic Pulse Width Modulator
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/i2c/twl.h>
+#include <linux/slab.h>
+
+/*
+ * This driver handles the PWMs of TWL4030 and TWL6030.
+ * The TRM names for the PWMs on TWL4030 are: PWM0, PWM1
+ * TWL6030 also have two PWMs named in the TRM as PWM1, PWM2
+ */
+
+#define TWL_PWM_MAX 0x7f
+
+/* Registers, bits and macro for TWL4030 */
+#define TWL4030_GPBR1_REG 0x0c
+#define TWL4030_PMBR1_REG 0x0d
+
+/* GPBR1 register bits */
+#define TWL4030_PWMXCLK_ENABLE (1 << 0)
+#define TWL4030_PWMX_ENABLE (1 << 2)
+#define TWL4030_PWMX_BITS (TWL4030_PWMX_ENABLE | TWL4030_PWMXCLK_ENABLE)
+#define TWL4030_PWM_TOGGLE(pwm, x) ((x) << (pwm))
+
+/* PMBR1 register bits */
+#define TWL4030_GPIO6_PWM0_MUTE_MASK (0x03 << 2)
+#define TWL4030_GPIO6_PWM0_MUTE_PWM0 (0x01 << 2)
+#define TWL4030_GPIO7_VIBRASYNC_PWM1_MASK (0x03 << 4)
+#define TWL4030_GPIO7_VIBRASYNC_PWM1_PWM1 (0x03 << 4)
+
+/* Register, bits and macro for TWL6030 */
+#define TWL6030_TOGGLE3_REG 0x92
+
+#define TWL6030_PWMXR (1 << 0)
+#define TWL6030_PWMXS (1 << 1)
+#define TWL6030_PWMXEN (1 << 2)
+#define TWL6030_PWM_TOGGLE(pwm, x) ((x) << (pwm * 3))
+
+struct twl_pwm_chip {
+ struct pwm_chip chip;
+ struct mutex mutex;
+ u8 twl6030_toggle3;
+ u8 twl4030_pwm_mux;
+};
+
+static inline struct twl_pwm_chip *to_twl(struct pwm_chip *chip)
+{
+ return container_of(chip, struct twl_pwm_chip, chip);
+}
+
+static int twl_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ int duty_cycle = DIV_ROUND_UP(duty_ns * TWL_PWM_MAX, period_ns) + 1;
+ u8 pwm_config[2] = { 1, 0 };
+ int base, ret;
+
+ /*
+ * To configure the duty period:
+ * On-cycle is set to 1 (the minimum allowed value)
+ * The off time of 0 is not configurable, so the mapping is:
+ * 0 -> off cycle = 2,
+ * 1 -> off cycle = 2,
+ * 2 -> off cycle = 3,
+ * 126 - > off cycle 127,
+ * 127 - > off cycle 1
+ * When on cycle == off cycle the PWM will be always on
+ */
+ if (duty_cycle == 1)
+ duty_cycle = 2;
+ else if (duty_cycle > TWL_PWM_MAX)
+ duty_cycle = 1;
+
+ base = pwm->hwpwm * 3;
+
+ pwm_config[1] = duty_cycle;
+
+ ret = twl_i2c_write(TWL_MODULE_PWM, pwm_config, base, 2);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
+
+ return ret;
+}
+
+static int twl4030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwm_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_GPBR1_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read GPBR1\n", pwm->label);
+ goto out;
+ }
+
+ val |= TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMXCLK_ENABLE);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+ val |= TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMX_ENABLE);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+ return ret;
+}
+
+static void twl4030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwm_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_GPBR1_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read GPBR1\n", pwm->label);
+ goto out;
+ }
+
+ val &= ~TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMX_ENABLE);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+ val &= ~TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMXCLK_ENABLE);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+}
+
+static int twl4030_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwm_chip *twl = to_twl(chip);
+ int ret;
+ u8 val, mask, bits;
+
+ if (pwm->hwpwm == 1) {
+ mask = TWL4030_GPIO7_VIBRASYNC_PWM1_MASK;
+ bits = TWL4030_GPIO7_VIBRASYNC_PWM1_PWM1;
+ } else {
+ mask = TWL4030_GPIO6_PWM0_MUTE_MASK;
+ bits = TWL4030_GPIO6_PWM0_MUTE_PWM0;
+ }
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_PMBR1_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read PMBR1\n", pwm->label);
+ goto out;
+ }
+
+ /* Save the current MUX configuration for the PWM */
+ twl->twl4030_pwm_mux &= ~mask;
+ twl->twl4030_pwm_mux |= (val & mask);
+
+ /* Select PWM functionality */
+ val &= ~mask;
+ val |= bits;
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_PMBR1_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+ return ret;
+}
+
+static void twl4030_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwm_chip *twl = container_of(chip, struct twl_pwm_chip,
+ chip);
+ int ret;
+ u8 val, mask;
+
+ if (pwm->hwpwm == 1)
+ mask = TWL4030_GPIO7_VIBRASYNC_PWM1_MASK;
+ else
+ mask = TWL4030_GPIO6_PWM0_MUTE_MASK;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_PMBR1_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read PMBR1\n", pwm->label);
+ goto out;
+ }
+
+ /* Restore the MUX configuration for the PWM */
+ val &= ~mask;
+ val |= (twl->twl4030_pwm_mux & mask);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_PMBR1_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+}
+
+static int twl6030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwm_chip *twl = container_of(chip, struct twl_pwm_chip,
+ chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ val = twl->twl6030_toggle3;
+ val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN);
+ val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXR);
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+ goto out;
+ }
+
+ twl->twl6030_toggle3 = val;
+out:
+ mutex_unlock(&twl->mutex);
+ return 0;
+}
+
+static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwm_chip *twl = container_of(chip, struct twl_pwm_chip,
+ chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ val = twl->twl6030_toggle3;
+ val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXR);
+ val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN);
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read TOGGLE3\n", pwm->label);
+ goto out;
+ }
+
+ val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN);
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+ goto out;
+ }
+
+ twl->twl6030_toggle3 = val;
+out:
+ mutex_unlock(&twl->mutex);
+}
+
+static const struct pwm_ops twl4030_pwm_ops = {
+ .config = twl_pwm_config,
+ .enable = twl4030_pwm_enable,
+ .disable = twl4030_pwm_disable,
+ .request = twl4030_pwm_request,
+ .free = twl4030_pwm_free,
+};
+
+static const struct pwm_ops twl6030_pwm_ops = {
+ .config = twl_pwm_config,
+ .enable = twl6030_pwm_enable,
+ .disable = twl6030_pwm_disable,
+};
+
+static int twl_pwm_probe(struct platform_device *pdev)
+{
+ struct twl_pwm_chip *twl;
+ int ret;
+
+ twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
+ if (!twl)
+ return -ENOMEM;
+
+ if (twl_class_is_4030())
+ twl->chip.ops = &twl4030_pwm_ops;
+ else
+ twl->chip.ops = &twl6030_pwm_ops;
+
+ twl->chip.dev = &pdev->dev;
+ twl->chip.base = -1;
+ twl->chip.npwm = 2;
+
+ mutex_init(&twl->mutex);
+
+ ret = pwmchip_add(&twl->chip);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, twl);
+
+ return 0;
+}
+
+static int twl_pwm_remove(struct platform_device *pdev)
+{
+ struct twl_pwm_chip *twl = platform_get_drvdata(pdev);
+
+ return pwmchip_remove(&twl->chip);
+}
+
+#ifdef CONFIG_OF
+static struct of_device_id twl_pwm_of_match[] = {
+ { .compatible = "ti,twl4030-pwm" },
+ { .compatible = "ti,twl6030-pwm" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, twl_pwm_of_match);
+#endif
+
+static struct platform_driver twl_pwm_driver = {
+ .driver = {
+ .name = "twl-pwm",
+ .of_match_table = of_match_ptr(twl_pwm_of_match),
+ },
+ .probe = twl_pwm_probe,
+ .remove = twl_pwm_remove,
+};
+module_platform_driver(twl_pwm_driver);
+
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
+MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030");
+MODULE_ALIAS("platform:twl-pwm");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-twl6030.c b/drivers/pwm/pwm-twl6030.c
deleted file mode 100644
index 378a7e2..0000000
--- a/drivers/pwm/pwm-twl6030.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * twl6030_pwm.c
- * Driver for PHOENIX (TWL6030) Pulse Width Modulator
- *
- * Copyright (C) 2010 Texas Instruments
- * Author: Hemanth V <hemanthv@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/i2c/twl.h>
-#include <linux/slab.h>
-
-#define LED_PWM_CTRL1 0xF4
-#define LED_PWM_CTRL2 0xF5
-
-/* Max value for CTRL1 register */
-#define PWM_CTRL1_MAX 255
-
-/* Pull down disable */
-#define PWM_CTRL2_DIS_PD (1 << 6)
-
-/* Current control 2.5 milli Amps */
-#define PWM_CTRL2_CURR_02 (2 << 4)
-
-/* LED supply source */
-#define PWM_CTRL2_SRC_VAC (1 << 2)
-
-/* LED modes */
-#define PWM_CTRL2_MODE_HW (0 << 0)
-#define PWM_CTRL2_MODE_SW (1 << 0)
-#define PWM_CTRL2_MODE_DIS (2 << 0)
-
-#define PWM_CTRL2_MODE_MASK 0x3
-
-struct twl6030_pwm_chip {
- struct pwm_chip chip;
-};
-
-static int twl6030_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- int ret;
- u8 val;
-
- /* Configure PWM */
- val = PWM_CTRL2_DIS_PD | PWM_CTRL2_CURR_02 | PWM_CTRL2_SRC_VAC |
- PWM_CTRL2_MODE_HW;
-
- ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
- if (ret < 0) {
- dev_err(chip->dev, "%s: Failed to configure PWM, Error %d\n",
- pwm->label, ret);
- return ret;
- }
-
- return 0;
-}
-
-static int twl6030_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns)
-{
- u8 duty_cycle = (duty_ns * PWM_CTRL1_MAX) / period_ns;
- int ret;
-
- ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, duty_cycle, LED_PWM_CTRL1);
- if (ret < 0) {
- pr_err("%s: Failed to configure PWM, Error %d\n",
- pwm->label, ret);
- return ret;
- }
-
- return 0;
-}
-
-static int twl6030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- int ret;
- u8 val;
-
- ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
- if (ret < 0) {
- dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
- pwm->label, ret);
- return ret;
- }
-
- /* Change mode to software control */
- val &= ~PWM_CTRL2_MODE_MASK;
- val |= PWM_CTRL2_MODE_SW;
-
- ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
- if (ret < 0) {
- dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
- pwm->label, ret);
- return ret;
- }
-
- twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
- return 0;
-}
-
-static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- int ret;
- u8 val;
-
- ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
- if (ret < 0) {
- dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
- pwm->label, ret);
- return;
- }
-
- val &= ~PWM_CTRL2_MODE_MASK;
- val |= PWM_CTRL2_MODE_HW;
-
- ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
- if (ret < 0) {
- dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
- pwm->label, ret);
- }
-}
-
-static const struct pwm_ops twl6030_pwm_ops = {
- .request = twl6030_pwm_request,
- .config = twl6030_pwm_config,
- .enable = twl6030_pwm_enable,
- .disable = twl6030_pwm_disable,
-};
-
-static int twl6030_pwm_probe(struct platform_device *pdev)
-{
- struct twl6030_pwm_chip *twl6030;
- int ret;
-
- twl6030 = devm_kzalloc(&pdev->dev, sizeof(*twl6030), GFP_KERNEL);
- if (!twl6030)
- return -ENOMEM;
-
- twl6030->chip.dev = &pdev->dev;
- twl6030->chip.ops = &twl6030_pwm_ops;
- twl6030->chip.base = -1;
- twl6030->chip.npwm = 1;
-
- ret = pwmchip_add(&twl6030->chip);
- if (ret < 0)
- return ret;
-
- platform_set_drvdata(pdev, twl6030);
-
- return 0;
-}
-
-static int twl6030_pwm_remove(struct platform_device *pdev)
-{
- struct twl6030_pwm_chip *twl6030 = platform_get_drvdata(pdev);
-
- return pwmchip_remove(&twl6030->chip);
-}
-
-static struct platform_driver twl6030_pwm_driver = {
- .driver = {
- .name = "twl6030-pwm",
- },
- .probe = twl6030_pwm_probe,
- .remove = twl6030_pwm_remove,
-};
-module_platform_driver(twl6030_pwm_driver);
-
-MODULE_ALIAS("platform:twl6030-pwm");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c
index ad14389..b0ba2d4 100644
--- a/drivers/pwm/pwm-vt8500.c
+++ b/drivers/pwm/pwm-vt8500.c
@@ -1,7 +1,8 @@
/*
* drivers/pwm/pwm-vt8500.c
*
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -21,14 +22,24 @@
#include <linux/io.h>
#include <linux/pwm.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <asm/div64.h>
-#define VT8500_NR_PWMS 4
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+/*
+ * SoC architecture allocates register space for 4 PWMs but only
+ * 2 are currently implemented.
+ */
+#define VT8500_NR_PWMS 2
struct vt8500_chip {
struct pwm_chip chip;
void __iomem *base;
+ struct clk *clk;
};
#define to_vt8500_chip(chip) container_of(chip, struct vt8500_chip, chip)
@@ -51,8 +62,15 @@
struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
unsigned long long c;
unsigned long period_cycles, prescale, pv, dc;
+ int err;
- c = 25000000/2; /* wild guess --- need to implement clocks */
+ err = clk_enable(vt8500->clk);
+ if (err < 0) {
+ dev_err(chip->dev, "failed to enable clock\n");
+ return err;
+ }
+
+ c = clk_get_rate(vt8500->clk);
c = c * period_ns;
do_div(c, 1000000000);
period_cycles = c;
@@ -64,8 +82,10 @@
if (pv > 4095)
pv = 4095;
- if (prescale > 1023)
+ if (prescale > 1023) {
+ clk_disable(vt8500->clk);
return -EINVAL;
+ }
c = (unsigned long long)pv * duty_ns;
do_div(c, period_ns);
@@ -80,13 +100,21 @@
pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 3));
writel(dc, vt8500->base + 0xc + (pwm->hwpwm << 4));
+ clk_disable(vt8500->clk);
return 0;
}
static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
+ int err;
struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+ err = clk_enable(vt8500->clk);
+ if (err < 0) {
+ dev_err(chip->dev, "failed to enable clock\n");
+ return err;
+ }
+
pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
writel(5, vt8500->base + (pwm->hwpwm << 4));
return 0;
@@ -98,6 +126,8 @@
pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
writel(0, vt8500->base + (pwm->hwpwm << 4));
+
+ clk_disable(vt8500->clk);
}
static struct pwm_ops vt8500_pwm_ops = {
@@ -107,12 +137,24 @@
.owner = THIS_MODULE,
};
-static int __devinit pwm_probe(struct platform_device *pdev)
+static const struct of_device_id vt8500_pwm_dt_ids[] = {
+ { .compatible = "via,vt8500-pwm", },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);
+
+static int vt8500_pwm_probe(struct platform_device *pdev)
{
struct vt8500_chip *chip;
struct resource *r;
+ struct device_node *np = pdev->dev.of_node;
int ret;
+ if (!np) {
+ dev_err(&pdev->dev, "invalid devicetree node\n");
+ return -EINVAL;
+ }
+
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
if (chip == NULL) {
dev_err(&pdev->dev, "failed to allocate memory\n");
@@ -124,6 +166,12 @@
chip->chip.base = -1;
chip->chip.npwm = VT8500_NR_PWMS;
+ chip->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(chip->clk)) {
+ dev_err(&pdev->dev, "clock source not specified\n");
+ return PTR_ERR(chip->clk);
+ }
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
dev_err(&pdev->dev, "no memory resource defined\n");
@@ -131,18 +179,26 @@
}
chip->base = devm_request_and_ioremap(&pdev->dev, r);
- if (chip->base == NULL)
+ if (!chip->base)
return -EADDRNOTAVAIL;
- ret = pwmchip_add(&chip->chip);
- if (ret < 0)
+ ret = clk_prepare(chip->clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to prepare clock\n");
return ret;
+ }
+
+ ret = pwmchip_add(&chip->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add PWM chip\n");
+ return ret;
+ }
platform_set_drvdata(pdev, chip);
return ret;
}
-static int __devexit pwm_remove(struct platform_device *pdev)
+static int vt8500_pwm_remove(struct platform_device *pdev)
{
struct vt8500_chip *chip;
@@ -150,28 +206,22 @@
if (chip == NULL)
return -ENODEV;
+ clk_unprepare(chip->clk);
+
return pwmchip_remove(&chip->chip);
}
-static struct platform_driver pwm_driver = {
+static struct platform_driver vt8500_pwm_driver = {
+ .probe = vt8500_pwm_probe,
+ .remove = vt8500_pwm_remove,
.driver = {
.name = "vt8500-pwm",
.owner = THIS_MODULE,
+ .of_match_table = vt8500_pwm_dt_ids,
},
- .probe = pwm_probe,
- .remove = __devexit_p(pwm_remove),
};
+module_platform_driver(vt8500_pwm_driver);
-static int __init pwm_init(void)
-{
- return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
- platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VT8500 PWM Driver");
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 75c0c4f..ab34497 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -20,6 +20,7 @@
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/platform_data/atmel.h>
+#include <linux/of.h>
#include <asm/io.h>
#include <asm/gpio.h>
@@ -768,6 +769,10 @@
/* chipselect must have been muxed as GPIO (e.g. in board setup) */
npcs_pin = (unsigned int)spi->controller_data;
+
+ if (gpio_is_valid(spi->cs_gpio))
+ npcs_pin = spi->cs_gpio;
+
asd = spi->controller_state;
if (!asd) {
asd = kzalloc(sizeof(struct atmel_spi_device), GFP_KERNEL);
@@ -937,8 +942,9 @@
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->dev.of_node = pdev->dev.of_node;
master->bus_num = pdev->id;
- master->num_chipselect = 4;
+ master->num_chipselect = master->dev.of_node ? 0 : 4;
master->setup = atmel_spi_setup;
master->transfer = atmel_spi_transfer;
master->cleanup = atmel_spi_cleanup;
@@ -1064,11 +1070,20 @@
#define atmel_spi_resume NULL
#endif
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_spi_dt_ids[] = {
+ { .compatible = "atmel,at91rm9200-spi" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_spi_dt_ids);
+#endif
static struct platform_driver atmel_spi_driver = {
.driver = {
.name = "atmel_spi",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(atmel_spi_dt_ids),
},
.suspend = atmel_spi_suspend,
.resume = atmel_spi_resume,
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 4dd7b7c..ad93231 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -215,6 +215,10 @@
writel(0, regs + S3C64XX_SPI_PACKET_CNT);
val = readl(regs + S3C64XX_SPI_CH_CFG);
+ val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON);
+ writel(val, regs + S3C64XX_SPI_CH_CFG);
+
+ val = readl(regs + S3C64XX_SPI_CH_CFG);
val |= S3C64XX_SPI_CH_SW_RST;
val &= ~S3C64XX_SPI_CH_HS_EN;
writel(val, regs + S3C64XX_SPI_CH_CFG);
@@ -248,10 +252,6 @@
val = readl(regs + S3C64XX_SPI_MODE_CFG);
val &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
writel(val, regs + S3C64XX_SPI_MODE_CFG);
-
- val = readl(regs + S3C64XX_SPI_CH_CFG);
- val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON);
- writel(val, regs + S3C64XX_SPI_CH_CFG);
}
static void s3c64xx_spi_dmacb(void *data)
@@ -771,8 +771,6 @@
if (list_is_last(&xfer->transfer_list,
&msg->transfers))
cs_toggle = 1;
- else
- disable_cs(sdd, spi);
}
msg->actual_length += xfer->len;
diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c
index 32f7b55..60cfae5 100644
--- a/drivers/spi/spi-sh-hspi.c
+++ b/drivers/spi/spi-sh-hspi.c
@@ -290,7 +290,7 @@
}
clk = clk_get(NULL, "shyway_clk");
- if (!clk) {
+ if (IS_ERR(clk)) {
dev_err(&pdev->dev, "shyway_clk is required\n");
ret = -EINVAL;
goto error0;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ab095ac..19ee901 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -824,6 +824,7 @@
struct spi_device *spi;
struct device_node *nc;
const __be32 *prop;
+ char modalias[SPI_NAME_SIZE + 4];
int rc;
int len;
@@ -887,7 +888,9 @@
spi->dev.of_node = nc;
/* Register the new device */
- request_module(spi->modalias);
+ snprintf(modalias, sizeof(modalias), "%s%s", SPI_MODULE_PREFIX,
+ spi->modalias);
+ request_module(modalias);
rc = spi_add_device(spi);
if (rc) {
dev_err(&master->dev, "spi_device register error %s\n",
diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c
index 0c96eb5..0331072 100644
--- a/fs/jffs2/nodemgmt.c
+++ b/fs/jffs2/nodemgmt.c
@@ -417,14 +417,16 @@
spin_unlock(&c->erase_completion_lock);
ret = jffs2_prealloc_raw_node_refs(c, jeb, 1);
- if (ret)
- return ret;
+
/* Just lock it again and continue. Nothing much can change because
we hold c->alloc_sem anyway. In fact, it's not entirely clear why
we hold c->erase_completion_lock in the majority of this function...
but that's a question for another (more caffeine-rich) day. */
spin_lock(&c->erase_completion_lock);
+ if (ret)
+ return ret;
+
waste = jeb->free_size;
jffs2_link_node_ref(c, jeb,
(jeb->offset + c->sector_size - waste) | REF_OBSOLETE,
diff --git a/include/linux/asn1.h b/include/linux/asn1.h
index 5c3f4e4b..eed6982 100644
--- a/include/linux/asn1.h
+++ b/include/linux/asn1.h
@@ -64,4 +64,6 @@
ASN1_LONG_TAG = 31 /* Long form tag */
};
+#define ASN1_INDEFINITE_LENGTH 0x80
+
#endif /* _LINUX_ASN1_H */
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 93b1e09..e0ce311 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -350,6 +350,7 @@
enum bcma_clkmode clkmode);
extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
bool on);
+extern u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset);
#define BCMA_DMA_TRANSLATION_MASK 0xC0000000
#define BCMA_DMA_TRANSLATION_NONE 0x00000000
#define BCMA_DMA_TRANSLATION_DMA32_CMT 0x40000000 /* Client Mode Translation for 32-bit DMA */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index acb4f7b..f94bc83 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1188,14 +1188,25 @@
static inline int queue_limit_discard_alignment(struct queue_limits *lim, sector_t sector)
{
- sector_t alignment = sector << 9;
- alignment = sector_div(alignment, lim->discard_granularity);
+ unsigned int alignment, granularity, offset;
if (!lim->max_discard_sectors)
return 0;
- alignment = lim->discard_granularity + lim->discard_alignment - alignment;
- return sector_div(alignment, lim->discard_granularity);
+ /* Why are these in bytes, not sectors? */
+ alignment = lim->discard_alignment >> 9;
+ granularity = lim->discard_granularity >> 9;
+ if (!granularity)
+ return 0;
+
+ /* Offset of the partition start in 'granularity' sectors */
+ offset = sector_div(sector, granularity);
+
+ /* And why do we do this modulus *again* in blkdev_issue_discard()? */
+ offset = (granularity + alignment - offset) % granularity;
+
+ /* Turn it back into bytes, gaah */
+ return offset << 9;
}
static inline int bdev_discard_alignment(struct block_device *bdev)
diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h
index 412bc6c..662fd1b 100644
--- a/include/linux/compiler-gcc4.h
+++ b/include/linux/compiler-gcc4.h
@@ -31,6 +31,8 @@
#define __linktime_error(message) __attribute__((__error__(message)))
+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
+
#if __GNUC_MINOR__ >= 5
/*
* Mark a position in code as unreachable. This can be used to
@@ -63,3 +65,13 @@
#define __compiletime_warning(message) __attribute__((warning(message)))
#define __compiletime_error(message) __attribute__((error(message)))
#endif
+
+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
+#if __GNUC_MINOR__ >= 4
+#define __HAVE_BUILTIN_BSWAP32__
+#define __HAVE_BUILTIN_BSWAP64__
+#endif
+#if __GNUC_MINOR__ >= 8 || (defined(__powerpc__) && __GNUC_MINOR__ >= 6)
+#define __HAVE_BUILTIN_BSWAP16__
+#endif
+#endif
diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h
index d8e636e..973ce10 100644
--- a/include/linux/compiler-intel.h
+++ b/include/linux/compiler-intel.h
@@ -29,3 +29,10 @@
#endif
#define uninitialized_var(x) x
+
+#ifndef __HAVE_BUILTIN_BSWAP16__
+/* icc has this, but it's called _bswap16 */
+#define __HAVE_BUILTIN_BSWAP16__
+#define __builtin_bswap16 _bswap16
+#endif
+
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index b121554..dd852b7 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -44,6 +44,10 @@
# define __rcu
#endif
+/* Indirect macros required for expanded argument pasting, eg. __LINE__. */
+#define ___PASTE(a,b) a##b
+#define __PASTE(a,b) ___PASTE(a,b)
+
#ifdef __KERNEL__
#ifdef __GNUC__
@@ -166,6 +170,11 @@
(typeof(ptr)) (__ptr + (off)); })
#endif
+/* Not-quite-unique ID. */
+#ifndef __UNIQUE_ID
+# define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __LINE__)
+#endif
+
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
diff --git a/include/linux/ima.h b/include/linux/ima.h
index 2c7223d..86c361e 100644
--- a/include/linux/ima.h
+++ b/include/linux/ima.h
@@ -18,6 +18,7 @@
extern int ima_file_check(struct file *file, int mask);
extern void ima_file_free(struct file *file);
extern int ima_file_mmap(struct file *file, unsigned long prot);
+extern int ima_module_check(struct file *file);
#else
static inline int ima_bprm_check(struct linux_binprm *bprm)
@@ -40,6 +41,11 @@
return 0;
}
+static inline int ima_module_check(struct file *file)
+{
+ return 0;
+}
+
#endif /* CONFIG_IMA_H */
#ifdef CONFIG_IMA_APPRAISE
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index d6a5806..137b419 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -16,17 +16,15 @@
/* Chosen so that structs with an unsigned long line up. */
#define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long))
-#define ___module_cat(a,b) __mod_ ## a ## b
-#define __module_cat(a,b) ___module_cat(a,b)
#ifdef MODULE
#define __MODULE_INFO(tag, name, info) \
-static const char __module_cat(name,__LINE__)[] \
+static const char __UNIQUE_ID(name)[] \
__used __attribute__((section(".modinfo"), unused, aligned(1))) \
= __stringify(tag) "=" info
#else /* !MODULE */
/* This struct is here for syntactic coherency, it is not used */
#define __MODULE_INFO(tag, name, info) \
- struct __module_cat(name,__LINE__) {}
+ struct __UNIQUE_ID(name) {}
#endif
#define __MODULE_PARM_TYPE(name, _type) \
__MODULE_INFO(parmtype, name##type, #name ":" _type)
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
index ed270bd..4eb0a50 100644
--- a/include/linux/mtd/blktrans.h
+++ b/include/linux/mtd/blktrans.h
@@ -23,6 +23,7 @@
#include <linux/mutex.h>
#include <linux/kref.h>
#include <linux/sysfs.h>
+#include <linux/workqueue.h>
struct hd_geometry;
struct mtd_info;
@@ -43,7 +44,8 @@
struct kref ref;
struct gendisk *disk;
struct attribute_group *disk_attributes;
- struct task_struct *thread;
+ struct workqueue_struct *wq;
+ struct work_struct work;
struct request_queue *rq;
spinlock_t queue_lock;
void *priv;
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index 0f6fea7..407d1e5 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -92,12 +92,26 @@
* Others use readb/writeb
*/
#if defined(__arm__)
-#define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u32 *)(((unsigned long)adr)+((reg)<<2))))
-#define WriteDOC_(d, adr, reg) do{ *(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)) = (__u32)d; wmb();} while(0)
+static inline u8 ReadDOC_(u32 __iomem *addr, unsigned long reg)
+{
+ return __raw_readl(addr + reg);
+}
+static inline void WriteDOC_(u8 data, u32 __iomem *addr, unsigned long reg)
+{
+ __raw_writel(data, addr + reg);
+ wmb();
+}
#define DOC_IOREMAP_LEN 0x8000
#elif defined(__ppc__)
-#define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u16 *)(((unsigned long)adr)+((reg)<<1))))
-#define WriteDOC_(d, adr, reg) do{ *(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)) = (__u16)d; wmb();} while(0)
+static inline u8 ReadDOC_(u16 __iomem *addr, unsigned long reg)
+{
+ return __raw_readw(addr + reg);
+}
+static inline void WriteDOC_(u8 data, u16 __iomem *addr, unsigned long reg)
+{
+ __raw_writew(data, addr + reg);
+ wmb();
+}
#define DOC_IOREMAP_LEN 0x4000
#else
#define ReadDOC_(adr, reg) readb((void __iomem *)(adr) + (reg))
diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h
index b200292..d6ed61e 100644
--- a/include/linux/mtd/fsmc.h
+++ b/include/linux/mtd/fsmc.h
@@ -155,9 +155,6 @@
unsigned int width;
unsigned int bank;
- /* CLE, ALE offsets */
- unsigned int cle_off;
- unsigned int ale_off;
enum access_mode mode;
void (*select_bank)(uint32_t bank, uint32_t busw);
diff --git a/include/linux/mtd/gpmi-nand.h b/include/linux/mtd/gpmi-nand.h
deleted file mode 100644
index ed3c4e0..0000000
--- a/include/linux/mtd/gpmi-nand.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MXS_GPMI_NAND_H__
-#define __MACH_MXS_GPMI_NAND_H__
-
-/* The size of the resources is fixed. */
-#define GPMI_NAND_RES_SIZE 6
-
-/* Resource names for the GPMI NAND driver. */
-#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand"
-#define GPMI_NAND_GPMI_INTERRUPT_RES_NAME "GPMI NAND GPMI Interrupt"
-#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "bch"
-#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "bch"
-#define GPMI_NAND_DMA_CHANNELS_RES_NAME "GPMI NAND DMA Channels"
-#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "gpmi-dma"
-
-/**
- * struct gpmi_nand_platform_data - GPMI NAND driver platform data.
- *
- * This structure communicates platform-specific information to the GPMI NAND
- * driver that can't be expressed as resources.
- *
- * @platform_init: A pointer to a function the driver will call to
- * initialize the platform (e.g., set up the pin mux).
- * @min_prop_delay_in_ns: Minimum propagation delay of GPMI signals to and
- * from the NAND Flash device, in nanoseconds.
- * @max_prop_delay_in_ns: Maximum propagation delay of GPMI signals to and
- * from the NAND Flash device, in nanoseconds.
- * @max_chip_count: The maximum number of chips for which the driver
- * should configure the hardware. This value most
- * likely reflects the number of pins that are
- * connected to a NAND Flash device. If this is
- * greater than the SoC hardware can support, the
- * driver will print a message and fail to initialize.
- * @partitions: An optional pointer to an array of partition
- * descriptions.
- * @partition_count: The number of elements in the partitions array.
- */
-struct gpmi_nand_platform_data {
- /* SoC hardware information. */
- int (*platform_init)(void);
-
- /* NAND Flash information. */
- unsigned int min_prop_delay_in_ns;
- unsigned int max_prop_delay_in_ns;
- unsigned int max_chip_count;
-
- /* Medium information. */
- struct mtd_partition *partitions;
- unsigned partition_count;
-};
-#endif
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index 3595a02..f6eb4332 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -328,7 +328,7 @@
static inline map_word map_word_load(struct map_info *map, const void *ptr)
{
- map_word r;
+ map_word r = {{0} };
if (map_bankwidth_is_1(map))
r.x[0] = *(unsigned char *)ptr;
@@ -391,7 +391,7 @@
static inline map_word inline_map_read(struct map_info *map, unsigned long ofs)
{
- map_word r;
+ map_word uninitialized_var(r);
if (map_bankwidth_is_1(map))
r.x[0] = __raw_readb(map->virt + ofs);
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 81d61e7..f9ac289 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -98,7 +98,7 @@
};
#define MTD_MAX_OOBFREE_ENTRIES_LARGE 32
-#define MTD_MAX_ECCPOS_ENTRIES_LARGE 448
+#define MTD_MAX_ECCPOS_ENTRIES_LARGE 640
/*
* Internal ECC layout control structure. For historical reasons, there is a
* similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 24e9159..7ccb3c5 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -219,6 +219,13 @@
#define NAND_OWN_BUFFERS 0x00020000
/* Chip may not exist, so silence any errors in scan */
#define NAND_SCAN_SILENT_NODEV 0x00040000
+/*
+ * Autodetect nand buswidth with readid/onfi.
+ * This suppose the driver will configure the hardware in 8 bits mode
+ * when calling nand_scan_ident, and update its configuration
+ * before calling nand_scan_tail.
+ */
+#define NAND_BUSWIDTH_AUTO 0x00080000
/* Options set by nand scan */
/* Nand scan has allocated controller struct */
@@ -471,8 +478,8 @@
* non 0 if ONFI supported.
* @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
* supported, 0 otherwise.
- * @onfi_set_features [REPLACEABLE] set the features for ONFI nand
- * @onfi_get_features [REPLACEABLE] get the features for ONFI nand
+ * @onfi_set_features: [REPLACEABLE] set the features for ONFI nand
+ * @onfi_get_features: [REPLACEABLE] get the features for ONFI nand
* @ecclayout: [REPLACEABLE] the default ECC placement scheme
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
index 01e4b15..1c28f88 100644
--- a/include/linux/mtd/sh_flctl.h
+++ b/include/linux/mtd/sh_flctl.h
@@ -20,6 +20,7 @@
#ifndef __SH_FLCTL_H__
#define __SH_FLCTL_H__
+#include <linux/completion.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
@@ -107,6 +108,7 @@
#define ESTERINTE (0x1 << 24) /* ECC error interrupt enable */
#define AC1CLR (0x1 << 19) /* ECC FIFO clear */
#define AC0CLR (0x1 << 18) /* Data FIFO clear */
+#define DREQ0EN (0x1 << 16) /* FLDTFIFODMA Request Enable */
#define ECERB (0x1 << 9) /* ECC error */
#define STERB (0x1 << 8) /* Status error */
#define STERINTE (0x1 << 4) /* Status error enable */
@@ -138,6 +140,8 @@
FL_TIMEOUT
};
+struct dma_chan;
+
struct sh_flctl {
struct mtd_info mtd;
struct nand_chip chip;
@@ -147,7 +151,7 @@
uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */
int read_bytes;
- int index;
+ unsigned int index;
int seqin_column; /* column in SEQIN cmd */
int seqin_page_addr; /* page_addr in SEQIN cmd */
uint32_t seqin_read_cmd; /* read cmd in SEQIN cmd */
@@ -161,6 +165,11 @@
unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */
unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */
unsigned qos_request:1; /* QoS request to prevent deep power shutdown */
+
+ /* DMA related objects */
+ struct dma_chan *chan_fifo0_rx;
+ struct dma_chan *chan_fifo0_tx;
+ struct completion dma_complete;
};
struct sh_flctl_platform_data {
@@ -170,6 +179,9 @@
unsigned has_hwecc:1;
unsigned use_holden:1;
+
+ unsigned int slave_id_fifo0_tx;
+ unsigned int slave_id_fifo0_rx;
};
static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
diff --git a/include/linux/platform_data/mtd-nomadik-nand.h b/include/linux/platform_data/mtd-nomadik-nand.h
deleted file mode 100644
index c3c8254..0000000
--- a/include/linux/platform_data/mtd-nomadik-nand.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-struct nomadik_nand_platform_data {
- struct mtd_partition *parts;
- int nparts;
- int options;
- int (*init) (void);
- int (*exit) (void);
-};
-
-#define NAND_IO_DATA 0x40000000
-#define NAND_IO_CMD 0x40800000
-#define NAND_IO_ADDR 0x41000000
-
-#endif /* __ASM_ARCH_NAND_H */
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index 112b314..6d661f3 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -171,6 +171,9 @@
unsigned int index,
const char *label);
+struct pwm_device *of_pwm_xlate_with_flags(struct pwm_chip *pc,
+ const struct of_phandle_args *args);
+
struct pwm_device *pwm_get(struct device *dev, const char *consumer);
void pwm_put(struct pwm_device *pwm);
diff --git a/include/linux/security.h b/include/linux/security.h
index 05e88bd..0f6afc6 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -694,6 +694,12 @@
* userspace to load a kernel module with the given name.
* @kmod_name name of the module requested by the kernel
* Return 0 if successful.
+ * @kernel_module_from_file:
+ * Load a kernel module from userspace.
+ * @file contains the file structure pointing to the file containing
+ * the kernel module to load. If the module is being loaded from a blob,
+ * this argument will be NULL.
+ * Return 0 if permission is granted.
* @task_fix_setuid:
* Update the module's state after setting one or more of the user
* identity attributes of the current process. The @flags parameter
@@ -1508,6 +1514,7 @@
int (*kernel_act_as)(struct cred *new, u32 secid);
int (*kernel_create_files_as)(struct cred *new, struct inode *inode);
int (*kernel_module_request)(char *kmod_name);
+ int (*kernel_module_from_file)(struct file *file);
int (*task_fix_setuid) (struct cred *new, const struct cred *old,
int flags);
int (*task_setpgid) (struct task_struct *p, pid_t pgid);
@@ -1765,6 +1772,7 @@
int security_kernel_act_as(struct cred *new, u32 secid);
int security_kernel_create_files_as(struct cred *new, struct inode *inode);
int security_kernel_module_request(char *kmod_name);
+int security_kernel_module_from_file(struct file *file);
int security_task_fix_setuid(struct cred *new, const struct cred *old,
int flags);
int security_task_setpgid(struct task_struct *p, pid_t pgid);
@@ -2278,6 +2286,11 @@
return 0;
}
+static inline int security_kernel_module_from_file(struct file *file)
+{
+ return 0;
+}
+
static inline int security_task_fix_setuid(struct cred *new,
const struct cred *old,
int flags)
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 36c3b07c5..6caee34 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -880,4 +880,5 @@
asmlinkage long sys_kcmp(pid_t pid1, pid_t pid2, int type,
unsigned long idx1, unsigned long idx2);
+asmlinkage long sys_finit_module(int fd, const char __user *uargs, int flags);
#endif
diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
index 6e595ba..2c531f4 100644
--- a/include/uapi/asm-generic/unistd.h
+++ b/include/uapi/asm-generic/unistd.h
@@ -690,9 +690,11 @@
compat_sys_process_vm_writev)
#define __NR_kcmp 272
__SYSCALL(__NR_kcmp, sys_kcmp)
+#define __NR_finit_module 273
+__SYSCALL(__NR_finit_module, sys_finit_module)
#undef __NR_syscalls
-#define __NR_syscalls 273
+#define __NR_syscalls 274
/*
* All syscalls below here should go away really,
diff --git a/include/uapi/linux/module.h b/include/uapi/linux/module.h
new file mode 100644
index 0000000..38da4258
--- /dev/null
+++ b/include/uapi/linux/module.h
@@ -0,0 +1,8 @@
+#ifndef _UAPI_LINUX_MODULE_H
+#define _UAPI_LINUX_MODULE_H
+
+/* Flags for sys_finit_module: */
+#define MODULE_INIT_IGNORE_MODVERSIONS 1
+#define MODULE_INIT_IGNORE_VERMAGIC 2
+
+#endif /* _UAPI_LINUX_MODULE_H */
diff --git a/include/uapi/linux/swab.h b/include/uapi/linux/swab.h
index e811474..0e011eb 100644
--- a/include/uapi/linux/swab.h
+++ b/include/uapi/linux/swab.h
@@ -45,7 +45,9 @@
static inline __attribute_const__ __u16 __fswab16(__u16 val)
{
-#ifdef __arch_swab16
+#ifdef __HAVE_BUILTIN_BSWAP16__
+ return __builtin_bswap16(val);
+#elif defined (__arch_swab16)
return __arch_swab16(val);
#else
return ___constant_swab16(val);
@@ -54,7 +56,9 @@
static inline __attribute_const__ __u32 __fswab32(__u32 val)
{
-#ifdef __arch_swab32
+#ifdef __HAVE_BUILTIN_BSWAP32__
+ return __builtin_bswap32(val);
+#elif defined(__arch_swab32)
return __arch_swab32(val);
#else
return ___constant_swab32(val);
@@ -63,7 +67,9 @@
static inline __attribute_const__ __u64 __fswab64(__u64 val)
{
-#ifdef __arch_swab64
+#ifdef __HAVE_BUILTIN_BSWAP64__
+ return __builtin_bswap64(val);
+#elif defined (__arch_swab64)
return __arch_swab64(val);
#elif defined(__SWAB_64_THRU_32__)
__u32 h = val >> 32;
diff --git a/kernel/Makefile b/kernel/Makefile
index ac0d533..6c072b6 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -54,7 +54,7 @@
obj-$(CONFIG_PROVE_LOCKING) += spinlock.o
obj-$(CONFIG_UID16) += uid16.o
obj-$(CONFIG_MODULES) += module.o
-obj-$(CONFIG_MODULE_SIG) += module_signing.o modsign_pubkey.o
+obj-$(CONFIG_MODULE_SIG) += module_signing.o modsign_pubkey.o modsign_certificate.o
obj-$(CONFIG_KALLSYMS) += kallsyms.o
obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
obj-$(CONFIG_KEXEC) += kexec.o
@@ -137,10 +137,14 @@
#
# Pull the signing certificate and any extra certificates into the kernel
#
-extra_certificates:
- touch $@
-kernel/modsign_pubkey.o: signing_key.x509 extra_certificates
+quiet_cmd_touch = TOUCH $@
+ cmd_touch = touch $@
+
+extra_certificates:
+ $(call cmd,touch)
+
+kernel/modsign_certificate.o: signing_key.x509 extra_certificates
###############################################################################
#
diff --git a/kernel/modsign_certificate.S b/kernel/modsign_certificate.S
new file mode 100644
index 0000000..246b4c6
--- /dev/null
+++ b/kernel/modsign_certificate.S
@@ -0,0 +1,19 @@
+/* SYMBOL_PREFIX defined on commandline from CONFIG_SYMBOL_PREFIX */
+#ifndef SYMBOL_PREFIX
+#define ASM_SYMBOL(sym) sym
+#else
+#define PASTE2(x,y) x##y
+#define PASTE(x,y) PASTE2(x,y)
+#define ASM_SYMBOL(sym) PASTE(SYMBOL_PREFIX, sym)
+#endif
+
+#define GLOBAL(name) \
+ .globl ASM_SYMBOL(name); \
+ ASM_SYMBOL(name):
+
+ .section ".init.data","aw"
+
+GLOBAL(modsign_certificate_list)
+ .incbin "signing_key.x509"
+ .incbin "extra_certificates"
+GLOBAL(modsign_certificate_list_end)
diff --git a/kernel/modsign_pubkey.c b/kernel/modsign_pubkey.c
index 767e559..045504f 100644
--- a/kernel/modsign_pubkey.c
+++ b/kernel/modsign_pubkey.c
@@ -20,12 +20,6 @@
extern __initdata const u8 modsign_certificate_list[];
extern __initdata const u8 modsign_certificate_list_end[];
-asm(".section .init.data,\"aw\"\n"
- SYMBOL_PREFIX "modsign_certificate_list:\n"
- ".incbin \"signing_key.x509\"\n"
- ".incbin \"extra_certificates\"\n"
- SYMBOL_PREFIX "modsign_certificate_list_end:"
- );
/*
* We need to make sure ccache doesn't cache the .o file as it doesn't notice
diff --git a/kernel/module.c b/kernel/module.c
index 808bd62..250092c 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -21,6 +21,7 @@
#include <linux/ftrace_event.h>
#include <linux/init.h>
#include <linux/kallsyms.h>
+#include <linux/file.h>
#include <linux/fs.h>
#include <linux/sysfs.h>
#include <linux/kernel.h>
@@ -28,6 +29,7 @@
#include <linux/vmalloc.h>
#include <linux/elf.h>
#include <linux/proc_fs.h>
+#include <linux/security.h>
#include <linux/seq_file.h>
#include <linux/syscalls.h>
#include <linux/fcntl.h>
@@ -59,6 +61,7 @@
#include <linux/pfn.h>
#include <linux/bsearch.h>
#include <linux/fips.h>
+#include <uapi/linux/module.h>
#include "module-internal.h"
#define CREATE_TRACE_POINTS
@@ -2279,7 +2282,7 @@
Elf_Shdr *symsect = info->sechdrs + info->index.sym;
Elf_Shdr *strsect = info->sechdrs + info->index.str;
const Elf_Sym *src;
- unsigned int i, nsrc, ndst, strtab_size;
+ unsigned int i, nsrc, ndst, strtab_size = 0;
/* Put symbol section at end of init part of module. */
symsect->sh_flags |= SHF_ALLOC;
@@ -2290,9 +2293,6 @@
src = (void *)info->hdr + symsect->sh_offset;
nsrc = symsect->sh_size / sizeof(*src);
- /* strtab always starts with a nul, so offset 0 is the empty string. */
- strtab_size = 1;
-
/* Compute total space required for the core symbols' strtab. */
for (ndst = i = 0; i < nsrc; i++) {
if (i == 0 ||
@@ -2334,7 +2334,6 @@
mod->core_symtab = dst = mod->module_core + info->symoffs;
mod->core_strtab = s = mod->module_core + info->stroffs;
src = mod->symtab;
- *s++ = 0;
for (ndst = i = 0; i < mod->num_symtab; i++) {
if (i == 0 ||
is_core_symbol(src+i, info->sechdrs, info->hdr->e_shnum)) {
@@ -2375,7 +2374,7 @@
void * __weak module_alloc(unsigned long size)
{
- return size == 0 ? NULL : vmalloc_exec(size);
+ return vmalloc_exec(size);
}
static void *module_alloc_update_bounds(unsigned long size)
@@ -2422,18 +2421,17 @@
#endif
#ifdef CONFIG_MODULE_SIG
-static int module_sig_check(struct load_info *info,
- const void *mod, unsigned long *_len)
+static int module_sig_check(struct load_info *info)
{
int err = -ENOKEY;
- unsigned long markerlen = sizeof(MODULE_SIG_STRING) - 1;
- unsigned long len = *_len;
+ const unsigned long markerlen = sizeof(MODULE_SIG_STRING) - 1;
+ const void *mod = info->hdr;
- if (len > markerlen &&
- memcmp(mod + len - markerlen, MODULE_SIG_STRING, markerlen) == 0) {
+ if (info->len > markerlen &&
+ memcmp(mod + info->len - markerlen, MODULE_SIG_STRING, markerlen) == 0) {
/* We truncate the module to discard the signature */
- *_len -= markerlen;
- err = mod_verify_sig(mod, _len);
+ info->len -= markerlen;
+ err = mod_verify_sig(mod, &info->len);
}
if (!err) {
@@ -2451,59 +2449,107 @@
return err;
}
#else /* !CONFIG_MODULE_SIG */
-static int module_sig_check(struct load_info *info,
- void *mod, unsigned long *len)
+static int module_sig_check(struct load_info *info)
{
return 0;
}
#endif /* !CONFIG_MODULE_SIG */
-/* Sets info->hdr, info->len and info->sig_ok. */
-static int copy_and_check(struct load_info *info,
- const void __user *umod, unsigned long len,
- const char __user *uargs)
+/* Sanity checks against invalid binaries, wrong arch, weird elf version. */
+static int elf_header_check(struct load_info *info)
{
- int err;
- Elf_Ehdr *hdr;
-
- if (len < sizeof(*hdr))
+ if (info->len < sizeof(*(info->hdr)))
return -ENOEXEC;
+ if (memcmp(info->hdr->e_ident, ELFMAG, SELFMAG) != 0
+ || info->hdr->e_type != ET_REL
+ || !elf_check_arch(info->hdr)
+ || info->hdr->e_shentsize != sizeof(Elf_Shdr))
+ return -ENOEXEC;
+
+ if (info->hdr->e_shoff >= info->len
+ || (info->hdr->e_shnum * sizeof(Elf_Shdr) >
+ info->len - info->hdr->e_shoff))
+ return -ENOEXEC;
+
+ return 0;
+}
+
+/* Sets info->hdr and info->len. */
+static int copy_module_from_user(const void __user *umod, unsigned long len,
+ struct load_info *info)
+{
+ int err;
+
+ info->len = len;
+ if (info->len < sizeof(*(info->hdr)))
+ return -ENOEXEC;
+
+ err = security_kernel_module_from_file(NULL);
+ if (err)
+ return err;
+
/* Suck in entire file: we'll want most of it. */
- if ((hdr = vmalloc(len)) == NULL)
+ info->hdr = vmalloc(info->len);
+ if (!info->hdr)
return -ENOMEM;
- if (copy_from_user(hdr, umod, len) != 0) {
- err = -EFAULT;
- goto free_hdr;
+ if (copy_from_user(info->hdr, umod, info->len) != 0) {
+ vfree(info->hdr);
+ return -EFAULT;
}
- err = module_sig_check(info, hdr, &len);
- if (err)
- goto free_hdr;
-
- /* Sanity checks against insmoding binaries or wrong arch,
- weird elf version */
- if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
- || hdr->e_type != ET_REL
- || !elf_check_arch(hdr)
- || hdr->e_shentsize != sizeof(Elf_Shdr)) {
- err = -ENOEXEC;
- goto free_hdr;
- }
-
- if (hdr->e_shoff >= len ||
- hdr->e_shnum * sizeof(Elf_Shdr) > len - hdr->e_shoff) {
- err = -ENOEXEC;
- goto free_hdr;
- }
-
- info->hdr = hdr;
- info->len = len;
return 0;
+}
-free_hdr:
- vfree(hdr);
+/* Sets info->hdr and info->len. */
+static int copy_module_from_fd(int fd, struct load_info *info)
+{
+ struct file *file;
+ int err;
+ struct kstat stat;
+ loff_t pos;
+ ssize_t bytes = 0;
+
+ file = fget(fd);
+ if (!file)
+ return -ENOEXEC;
+
+ err = security_kernel_module_from_file(file);
+ if (err)
+ goto out;
+
+ err = vfs_getattr(file->f_vfsmnt, file->f_dentry, &stat);
+ if (err)
+ goto out;
+
+ if (stat.size > INT_MAX) {
+ err = -EFBIG;
+ goto out;
+ }
+ info->hdr = vmalloc(stat.size);
+ if (!info->hdr) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ pos = 0;
+ while (pos < stat.size) {
+ bytes = kernel_read(file, pos, (char *)(info->hdr) + pos,
+ stat.size - pos);
+ if (bytes < 0) {
+ vfree(info->hdr);
+ err = bytes;
+ goto out;
+ }
+ if (bytes == 0)
+ break;
+ pos += bytes;
+ }
+ info->len = pos;
+
+out:
+ fput(file);
return err;
}
@@ -2512,7 +2558,7 @@
vfree(info->hdr);
}
-static int rewrite_section_headers(struct load_info *info)
+static int rewrite_section_headers(struct load_info *info, int flags)
{
unsigned int i;
@@ -2540,7 +2586,10 @@
}
/* Track but don't keep modinfo and version sections. */
- info->index.vers = find_sec(info, "__versions");
+ if (flags & MODULE_INIT_IGNORE_MODVERSIONS)
+ info->index.vers = 0; /* Pretend no __versions section! */
+ else
+ info->index.vers = find_sec(info, "__versions");
info->index.info = find_sec(info, ".modinfo");
info->sechdrs[info->index.info].sh_flags &= ~(unsigned long)SHF_ALLOC;
info->sechdrs[info->index.vers].sh_flags &= ~(unsigned long)SHF_ALLOC;
@@ -2555,7 +2604,7 @@
* Return the temporary module pointer (we'll replace it with the final
* one when we move the module sections around).
*/
-static struct module *setup_load_info(struct load_info *info)
+static struct module *setup_load_info(struct load_info *info, int flags)
{
unsigned int i;
int err;
@@ -2566,7 +2615,7 @@
info->secstrings = (void *)info->hdr
+ info->sechdrs[info->hdr->e_shstrndx].sh_offset;
- err = rewrite_section_headers(info);
+ err = rewrite_section_headers(info, flags);
if (err)
return ERR_PTR(err);
@@ -2604,11 +2653,14 @@
return mod;
}
-static int check_modinfo(struct module *mod, struct load_info *info)
+static int check_modinfo(struct module *mod, struct load_info *info, int flags)
{
const char *modmagic = get_modinfo(info, "vermagic");
int err;
+ if (flags & MODULE_INIT_IGNORE_VERMAGIC)
+ modmagic = NULL;
+
/* This is allowed: modprobe --force will invalidate it. */
if (!modmagic) {
err = try_to_force_load(mod, "bad vermagic");
@@ -2738,20 +2790,23 @@
memset(ptr, 0, mod->core_size);
mod->module_core = ptr;
- ptr = module_alloc_update_bounds(mod->init_size);
- /*
- * The pointer to this block is stored in the module structure
- * which is inside the block. This block doesn't need to be
- * scanned as it contains data and code that will be freed
- * after the module is initialized.
- */
- kmemleak_ignore(ptr);
- if (!ptr && mod->init_size) {
- module_free(mod, mod->module_core);
- return -ENOMEM;
- }
- memset(ptr, 0, mod->init_size);
- mod->module_init = ptr;
+ if (mod->init_size) {
+ ptr = module_alloc_update_bounds(mod->init_size);
+ /*
+ * The pointer to this block is stored in the module structure
+ * which is inside the block. This block doesn't need to be
+ * scanned as it contains data and code that will be freed
+ * after the module is initialized.
+ */
+ kmemleak_ignore(ptr);
+ if (!ptr) {
+ module_free(mod, mod->module_core);
+ return -ENOMEM;
+ }
+ memset(ptr, 0, mod->init_size);
+ mod->module_init = ptr;
+ } else
+ mod->module_init = NULL;
/* Transfer each section which specifies SHF_ALLOC */
pr_debug("final section addresses:\n");
@@ -2844,18 +2899,18 @@
return 0;
}
-static struct module *layout_and_allocate(struct load_info *info)
+static struct module *layout_and_allocate(struct load_info *info, int flags)
{
/* Module within temporary copy. */
struct module *mod;
Elf_Shdr *pcpusec;
int err;
- mod = setup_load_info(info);
+ mod = setup_load_info(info, flags);
if (IS_ERR(mod))
return mod;
- err = check_modinfo(mod, info);
+ err = check_modinfo(mod, info, flags);
if (err)
return ERR_PTR(err);
@@ -2942,156 +2997,6 @@
return ret;
}
-/* Allocate and load the module: note that size of section 0 is always
- zero, and we rely on this for optional sections. */
-static struct module *load_module(void __user *umod,
- unsigned long len,
- const char __user *uargs)
-{
- struct load_info info = { NULL, };
- struct module *mod, *old;
- long err;
-
- pr_debug("load_module: umod=%p, len=%lu, uargs=%p\n",
- umod, len, uargs);
-
- /* Copy in the blobs from userspace, check they are vaguely sane. */
- err = copy_and_check(&info, umod, len, uargs);
- if (err)
- return ERR_PTR(err);
-
- /* Figure out module layout, and allocate all the memory. */
- mod = layout_and_allocate(&info);
- if (IS_ERR(mod)) {
- err = PTR_ERR(mod);
- goto free_copy;
- }
-
-#ifdef CONFIG_MODULE_SIG
- mod->sig_ok = info.sig_ok;
- if (!mod->sig_ok)
- add_taint_module(mod, TAINT_FORCED_MODULE);
-#endif
-
- /* Now module is in final location, initialize linked lists, etc. */
- err = module_unload_init(mod);
- if (err)
- goto free_module;
-
- /* Now we've got everything in the final locations, we can
- * find optional sections. */
- find_module_sections(mod, &info);
-
- err = check_module_license_and_versions(mod);
- if (err)
- goto free_unload;
-
- /* Set up MODINFO_ATTR fields */
- setup_modinfo(mod, &info);
-
- /* Fix up syms, so that st_value is a pointer to location. */
- err = simplify_symbols(mod, &info);
- if (err < 0)
- goto free_modinfo;
-
- err = apply_relocations(mod, &info);
- if (err < 0)
- goto free_modinfo;
-
- err = post_relocation(mod, &info);
- if (err < 0)
- goto free_modinfo;
-
- flush_module_icache(mod);
-
- /* Now copy in args */
- mod->args = strndup_user(uargs, ~0UL >> 1);
- if (IS_ERR(mod->args)) {
- err = PTR_ERR(mod->args);
- goto free_arch_cleanup;
- }
-
- /* Mark state as coming so strong_try_module_get() ignores us. */
- mod->state = MODULE_STATE_COMING;
-
- /* Now sew it into the lists so we can get lockdep and oops
- * info during argument parsing. No one should access us, since
- * strong_try_module_get() will fail.
- * lockdep/oops can run asynchronous, so use the RCU list insertion
- * function to insert in a way safe to concurrent readers.
- * The mutex protects against concurrent writers.
- */
-again:
- mutex_lock(&module_mutex);
- if ((old = find_module(mod->name)) != NULL) {
- if (old->state == MODULE_STATE_COMING) {
- /* Wait in case it fails to load. */
- mutex_unlock(&module_mutex);
- err = wait_event_interruptible(module_wq,
- finished_loading(mod->name));
- if (err)
- goto free_arch_cleanup;
- goto again;
- }
- err = -EEXIST;
- goto unlock;
- }
-
- /* This has to be done once we're sure module name is unique. */
- dynamic_debug_setup(info.debug, info.num_debug);
-
- /* Find duplicate symbols */
- err = verify_export_symbols(mod);
- if (err < 0)
- goto ddebug;
-
- module_bug_finalize(info.hdr, info.sechdrs, mod);
- list_add_rcu(&mod->list, &modules);
- mutex_unlock(&module_mutex);
-
- /* Module is ready to execute: parsing args may do that. */
- err = parse_args(mod->name, mod->args, mod->kp, mod->num_kp,
- -32768, 32767, &ddebug_dyndbg_module_param_cb);
- if (err < 0)
- goto unlink;
-
- /* Link in to syfs. */
- err = mod_sysfs_setup(mod, &info, mod->kp, mod->num_kp);
- if (err < 0)
- goto unlink;
-
- /* Get rid of temporary copy. */
- free_copy(&info);
-
- /* Done! */
- trace_module_load(mod);
- return mod;
-
- unlink:
- mutex_lock(&module_mutex);
- /* Unlink carefully: kallsyms could be walking list. */
- list_del_rcu(&mod->list);
- module_bug_cleanup(mod);
- wake_up_all(&module_wq);
- ddebug:
- dynamic_debug_remove(info.debug);
- unlock:
- mutex_unlock(&module_mutex);
- synchronize_sched();
- kfree(mod->args);
- free_arch_cleanup:
- module_arch_cleanup(mod);
- free_modinfo:
- free_modinfo(mod);
- free_unload:
- module_unload_free(mod);
- free_module:
- module_deallocate(mod, &info);
- free_copy:
- free_copy(&info);
- return ERR_PTR(err);
-}
-
/* Call module constructors. */
static void do_mod_ctors(struct module *mod)
{
@@ -3104,21 +3009,10 @@
}
/* This is where the real work happens */
-SYSCALL_DEFINE3(init_module, void __user *, umod,
- unsigned long, len, const char __user *, uargs)
+static int do_init_module(struct module *mod)
{
- struct module *mod;
int ret = 0;
- /* Must have permission */
- if (!capable(CAP_SYS_MODULE) || modules_disabled)
- return -EPERM;
-
- /* Do all the hard work */
- mod = load_module(umod, len, uargs);
- if (IS_ERR(mod))
- return PTR_ERR(mod);
-
blocking_notifier_call_chain(&module_notify_list,
MODULE_STATE_COMING, mod);
@@ -3188,6 +3082,205 @@
return 0;
}
+static int may_init_module(void)
+{
+ if (!capable(CAP_SYS_MODULE) || modules_disabled)
+ return -EPERM;
+
+ return 0;
+}
+
+/* Allocate and load the module: note that size of section 0 is always
+ zero, and we rely on this for optional sections. */
+static int load_module(struct load_info *info, const char __user *uargs,
+ int flags)
+{
+ struct module *mod, *old;
+ long err;
+
+ err = module_sig_check(info);
+ if (err)
+ goto free_copy;
+
+ err = elf_header_check(info);
+ if (err)
+ goto free_copy;
+
+ /* Figure out module layout, and allocate all the memory. */
+ mod = layout_and_allocate(info, flags);
+ if (IS_ERR(mod)) {
+ err = PTR_ERR(mod);
+ goto free_copy;
+ }
+
+#ifdef CONFIG_MODULE_SIG
+ mod->sig_ok = info->sig_ok;
+ if (!mod->sig_ok)
+ add_taint_module(mod, TAINT_FORCED_MODULE);
+#endif
+
+ /* Now module is in final location, initialize linked lists, etc. */
+ err = module_unload_init(mod);
+ if (err)
+ goto free_module;
+
+ /* Now we've got everything in the final locations, we can
+ * find optional sections. */
+ find_module_sections(mod, info);
+
+ err = check_module_license_and_versions(mod);
+ if (err)
+ goto free_unload;
+
+ /* Set up MODINFO_ATTR fields */
+ setup_modinfo(mod, info);
+
+ /* Fix up syms, so that st_value is a pointer to location. */
+ err = simplify_symbols(mod, info);
+ if (err < 0)
+ goto free_modinfo;
+
+ err = apply_relocations(mod, info);
+ if (err < 0)
+ goto free_modinfo;
+
+ err = post_relocation(mod, info);
+ if (err < 0)
+ goto free_modinfo;
+
+ flush_module_icache(mod);
+
+ /* Now copy in args */
+ mod->args = strndup_user(uargs, ~0UL >> 1);
+ if (IS_ERR(mod->args)) {
+ err = PTR_ERR(mod->args);
+ goto free_arch_cleanup;
+ }
+
+ /* Mark state as coming so strong_try_module_get() ignores us. */
+ mod->state = MODULE_STATE_COMING;
+
+ /* Now sew it into the lists so we can get lockdep and oops
+ * info during argument parsing. No one should access us, since
+ * strong_try_module_get() will fail.
+ * lockdep/oops can run asynchronous, so use the RCU list insertion
+ * function to insert in a way safe to concurrent readers.
+ * The mutex protects against concurrent writers.
+ */
+again:
+ mutex_lock(&module_mutex);
+ if ((old = find_module(mod->name)) != NULL) {
+ if (old->state == MODULE_STATE_COMING) {
+ /* Wait in case it fails to load. */
+ mutex_unlock(&module_mutex);
+ err = wait_event_interruptible(module_wq,
+ finished_loading(mod->name));
+ if (err)
+ goto free_arch_cleanup;
+ goto again;
+ }
+ err = -EEXIST;
+ goto unlock;
+ }
+
+ /* This has to be done once we're sure module name is unique. */
+ dynamic_debug_setup(info->debug, info->num_debug);
+
+ /* Find duplicate symbols */
+ err = verify_export_symbols(mod);
+ if (err < 0)
+ goto ddebug;
+
+ module_bug_finalize(info->hdr, info->sechdrs, mod);
+ list_add_rcu(&mod->list, &modules);
+ mutex_unlock(&module_mutex);
+
+ /* Module is ready to execute: parsing args may do that. */
+ err = parse_args(mod->name, mod->args, mod->kp, mod->num_kp,
+ -32768, 32767, &ddebug_dyndbg_module_param_cb);
+ if (err < 0)
+ goto unlink;
+
+ /* Link in to syfs. */
+ err = mod_sysfs_setup(mod, info, mod->kp, mod->num_kp);
+ if (err < 0)
+ goto unlink;
+
+ /* Get rid of temporary copy. */
+ free_copy(info);
+
+ /* Done! */
+ trace_module_load(mod);
+
+ return do_init_module(mod);
+
+ unlink:
+ mutex_lock(&module_mutex);
+ /* Unlink carefully: kallsyms could be walking list. */
+ list_del_rcu(&mod->list);
+ module_bug_cleanup(mod);
+ wake_up_all(&module_wq);
+ ddebug:
+ dynamic_debug_remove(info->debug);
+ unlock:
+ mutex_unlock(&module_mutex);
+ synchronize_sched();
+ kfree(mod->args);
+ free_arch_cleanup:
+ module_arch_cleanup(mod);
+ free_modinfo:
+ free_modinfo(mod);
+ free_unload:
+ module_unload_free(mod);
+ free_module:
+ module_deallocate(mod, info);
+ free_copy:
+ free_copy(info);
+ return err;
+}
+
+SYSCALL_DEFINE3(init_module, void __user *, umod,
+ unsigned long, len, const char __user *, uargs)
+{
+ int err;
+ struct load_info info = { };
+
+ err = may_init_module();
+ if (err)
+ return err;
+
+ pr_debug("init_module: umod=%p, len=%lu, uargs=%p\n",
+ umod, len, uargs);
+
+ err = copy_module_from_user(umod, len, &info);
+ if (err)
+ return err;
+
+ return load_module(&info, uargs, 0);
+}
+
+SYSCALL_DEFINE3(finit_module, int, fd, const char __user *, uargs, int, flags)
+{
+ int err;
+ struct load_info info = { };
+
+ err = may_init_module();
+ if (err)
+ return err;
+
+ pr_debug("finit_module: fd=%d, uargs=%p, flags=%i\n", fd, uargs, flags);
+
+ if (flags & ~(MODULE_INIT_IGNORE_MODVERSIONS
+ |MODULE_INIT_IGNORE_VERMAGIC))
+ return -EINVAL;
+
+ err = copy_module_from_fd(fd, &info);
+ if (err)
+ return err;
+
+ return load_module(&info, uargs, flags);
+}
+
static inline int within(unsigned long addr, void *start, unsigned long size)
{
return ((void *)addr >= start && (void *)addr < start + size);
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index d738402..a278cad 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -9,6 +9,7 @@
#include <asm/uaccess.h>
#include <linux/kernel_stat.h>
#include <trace/events/timer.h>
+#include <linux/random.h>
/*
* Called after updating RLIMIT_CPU to run cpu timer and update
@@ -470,6 +471,8 @@
*/
void posix_cpu_timers_exit(struct task_struct *tsk)
{
+ add_device_randomness((const void*) &tsk->se.sum_exec_runtime,
+ sizeof(unsigned long long));
cleanup_timers(tsk->cpu_timers,
tsk->utime, tsk->stime, tsk->se.sum_exec_runtime);
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index dbff751..395084d 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -25,6 +25,7 @@
cond_syscall(sys_kexec_load);
cond_syscall(compat_sys_kexec_load);
cond_syscall(sys_init_module);
+cond_syscall(sys_finit_module);
cond_syscall(sys_delete_module);
cond_syscall(sys_socketpair);
cond_syscall(sys_bind);
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 997c6a1..75a2ab3 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -344,6 +344,10 @@
{
struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
+ /* kick off the timer for the hardlockup detector */
+ hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ hrtimer->function = watchdog_timer_fn;
+
if (!watchdog_enabled) {
kthread_park(current);
return;
@@ -352,10 +356,6 @@
/* Enable the perf event */
watchdog_nmi_enable(cpu);
- /* kick off the timer for the hardlockup detector */
- hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- hrtimer->function = watchdog_timer_fn;
-
/* done here because hrtimer_start can only pin to smp_processor_id() */
hrtimer_start(hrtimer, ns_to_ktime(sample_period),
HRTIMER_MODE_REL_PINNED);
@@ -369,9 +369,6 @@
{
struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
- if (!watchdog_enabled)
- return;
-
watchdog_set_prio(SCHED_NORMAL, 0);
hrtimer_cancel(hrtimer);
/* disable the perf event */
diff --git a/lib/asn1_decoder.c b/lib/asn1_decoder.c
index 5293d24..11b9b01 100644
--- a/lib/asn1_decoder.c
+++ b/lib/asn1_decoder.c
@@ -81,7 +81,7 @@
goto next_tag;
}
- if (unlikely((tag & 0x1f) == 0x1f)) {
+ if (unlikely((tag & 0x1f) == ASN1_LONG_TAG)) {
do {
if (unlikely(datalen - dp < 2))
goto data_overrun_error;
@@ -96,7 +96,7 @@
goto next_tag;
}
- if (unlikely(len == 0x80)) {
+ if (unlikely(len == ASN1_INDEFINITE_LENGTH)) {
/* Indefinite length */
if (unlikely((tag & ASN1_CONS_BIT) == ASN1_PRIM << 5))
goto indefinite_len_primitive;
@@ -222,7 +222,7 @@
if (unlikely(dp >= datalen - 1))
goto data_overrun_error;
tag = data[dp++];
- if (unlikely((tag & 0x1f) == 0x1f))
+ if (unlikely((tag & 0x1f) == ASN1_LONG_TAG))
goto long_tag_not_supported;
if (op & ASN1_OP_MATCH__ANY) {
@@ -254,7 +254,7 @@
len = data[dp++];
if (len > 0x7f) {
- if (unlikely(len == 0x80)) {
+ if (unlikely(len == ASN1_INDEFINITE_LENGTH)) {
/* Indefinite length */
if (unlikely(!(tag & ASN1_CONS_BIT)))
goto indefinite_len_primitive;
diff --git a/scripts/Makefile.modsign b/scripts/Makefile.modsign
new file mode 100644
index 0000000..abfda62
--- /dev/null
+++ b/scripts/Makefile.modsign
@@ -0,0 +1,32 @@
+# ==========================================================================
+# Signing modules
+# ==========================================================================
+
+PHONY := __modsign
+__modsign:
+
+include scripts/Kbuild.include
+
+__modules := $(sort $(shell grep -h '\.ko' /dev/null $(wildcard $(MODVERDIR)/*.mod)))
+modules := $(patsubst %.o,%.ko,$(wildcard $(__modules:.ko=.o)))
+
+PHONY += $(modules)
+__modsign: $(modules)
+ @:
+
+quiet_cmd_sign_ko = SIGN [M] $(2)/$(notdir $@)
+ cmd_sign_ko = $(mod_sign_cmd) $(2)/$(notdir $@)
+
+# Modules built outside the kernel source tree go into extra by default
+INSTALL_MOD_DIR ?= extra
+ext-mod-dir = $(INSTALL_MOD_DIR)$(subst $(patsubst %/,%,$(KBUILD_EXTMOD)),,$(@D))
+
+modinst_dir = $(if $(KBUILD_EXTMOD),$(ext-mod-dir),kernel/$(@D))
+
+$(modules):
+ $(call cmd,sign_ko,$(MODLIB)/$(modinst_dir))
+
+# Declare the contents of the .PHONY variable as phony. We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
diff --git a/security/capability.c b/security/capability.c
index b14a30c..0fe5a02 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -395,6 +395,11 @@
return 0;
}
+static int cap_kernel_module_from_file(struct file *file)
+{
+ return 0;
+}
+
static int cap_task_setpgid(struct task_struct *p, pid_t pgid)
{
return 0;
@@ -967,6 +972,7 @@
set_to_cap_if_null(ops, kernel_act_as);
set_to_cap_if_null(ops, kernel_create_files_as);
set_to_cap_if_null(ops, kernel_module_request);
+ set_to_cap_if_null(ops, kernel_module_from_file);
set_to_cap_if_null(ops, task_fix_setuid);
set_to_cap_if_null(ops, task_setpgid);
set_to_cap_if_null(ops, task_getpgid);
diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
index 6ee8826..3b2adb7 100644
--- a/security/integrity/ima/ima.h
+++ b/security/integrity/ima/ima.h
@@ -127,7 +127,7 @@
struct integrity_iint_cache *integrity_iint_find(struct inode *inode);
/* IMA policy related functions */
-enum ima_hooks { FILE_CHECK = 1, FILE_MMAP, BPRM_CHECK, POST_SETATTR };
+enum ima_hooks { FILE_CHECK = 1, FILE_MMAP, BPRM_CHECK, MODULE_CHECK, POST_SETATTR };
int ima_match_policy(struct inode *inode, enum ima_hooks func, int mask,
int flags);
diff --git a/security/integrity/ima/ima_api.c b/security/integrity/ima/ima_api.c
index b356884..0cea3db 100644
--- a/security/integrity/ima/ima_api.c
+++ b/security/integrity/ima/ima_api.c
@@ -100,12 +100,12 @@
* ima_get_action - appraise & measure decision based on policy.
* @inode: pointer to inode to measure
* @mask: contains the permission mask (MAY_READ, MAY_WRITE, MAY_EXECUTE)
- * @function: calling function (FILE_CHECK, BPRM_CHECK, FILE_MMAP)
+ * @function: calling function (FILE_CHECK, BPRM_CHECK, FILE_MMAP, MODULE_CHECK)
*
* The policy is defined in terms of keypairs:
* subj=, obj=, type=, func=, mask=, fsmagic=
* subj,obj, and type: are LSM specific.
- * func: FILE_CHECK | BPRM_CHECK | FILE_MMAP
+ * func: FILE_CHECK | BPRM_CHECK | FILE_MMAP | MODULE_CHECK
* mask: contains the permission mask
* fsmagic: hex value
*
diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index 73c9a26..45de18e 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -280,6 +280,27 @@
}
EXPORT_SYMBOL_GPL(ima_file_check);
+/**
+ * ima_module_check - based on policy, collect/store/appraise measurement.
+ * @file: pointer to the file to be measured/appraised
+ *
+ * Measure/appraise kernel modules based on policy.
+ *
+ * Always return 0 and audit dentry_open failures.
+ * Return code is based upon measurement appraisal.
+ */
+int ima_module_check(struct file *file)
+{
+ int rc;
+
+ if (!file)
+ rc = INTEGRITY_UNKNOWN;
+ else
+ rc = process_measurement(file, file->f_dentry->d_name.name,
+ MAY_EXEC, MODULE_CHECK);
+ return (ima_appraise & IMA_APPRAISE_ENFORCE) ? rc : 0;
+}
+
static int __init init_ima(void)
{
int error;
diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c
index c7dacd2..af7d182 100644
--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -80,6 +80,7 @@
.flags = IMA_FUNC | IMA_MASK},
{.action = MEASURE,.func = FILE_CHECK,.mask = MAY_READ,.uid = GLOBAL_ROOT_UID,
.flags = IMA_FUNC | IMA_MASK | IMA_UID},
+ {.action = MEASURE,.func = MODULE_CHECK, .flags = IMA_FUNC},
};
static struct ima_rule_entry default_appraise_rules[] = {
@@ -401,6 +402,8 @@
/* PATH_CHECK is for backwards compat */
else if (strcmp(args[0].from, "PATH_CHECK") == 0)
entry->func = FILE_CHECK;
+ else if (strcmp(args[0].from, "MODULE_CHECK") == 0)
+ entry->func = MODULE_CHECK;
else if (strcmp(args[0].from, "FILE_MMAP") == 0)
entry->func = FILE_MMAP;
else if (strcmp(args[0].from, "BPRM_CHECK") == 0)
diff --git a/security/security.c b/security/security.c
index 8dcd4ae..daa97f4 100644
--- a/security/security.c
+++ b/security/security.c
@@ -820,6 +820,16 @@
return security_ops->kernel_module_request(kmod_name);
}
+int security_kernel_module_from_file(struct file *file)
+{
+ int ret;
+
+ ret = security_ops->kernel_module_from_file(file);
+ if (ret)
+ return ret;
+ return ima_module_check(file);
+}
+
int security_task_fix_setuid(struct cred *new, const struct cred *old,
int flags)
{
