/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 ******************************************************************************/
/*****************************************************************************
 *
 * Module:	__RTW_MP_PHY_REGDEF_H_
 *
 *
 * Note:	1. Define PMAC/BB register map
 *			2. Define RF register map
 *			3. PMAC/BB register bit mask.
 *			4. RF reg bit mask.
 *			5. Other BB/RF relative definition.
 *
 *
 * Export:	Constants, macro, functions(API), global variables(None).
 *
 * Abbrev:
 *
 * History:
 *	Data			Who		Remark
 *	08/07/2007	MHC		1. Porting from 9x series PHYCFG.h.
 *						2. Reorganize code architecture.
 *	09/25/2008	MH		1. Add RL6052 register definition
 *
 *****************************************************************************/
#ifndef __RTW_MP_PHY_REGDEF_H_
#define __RTW_MP_PHY_REGDEF_H_


/*--------------------------Define Parameters-------------------------------*/

/*  */
/*	8192S Regsiter offset definition */
/*  */

/*  */
/*  BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF */
/*  1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
/*  2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
/*  3. RF register 0x00-2E */
/*  4. Bit Mask for BB/RF register */
/*  5. Other definition for BB/RF R/W */
/*  */


/*  */
/*  1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
/*  1. Page1(0x100) */
/*  */
#define	rPMAC_Reset		0x100
#define	rPMAC_TxStart		0x104
#define	rPMAC_TxLegacySIG	0x108
#define	rPMAC_TxHTSIG1		0x10c
#define	rPMAC_TxHTSIG2		0x110
#define	rPMAC_PHYDebug		0x114
#define	rPMAC_TxPacketNum	0x118
#define	rPMAC_TxIdle		0x11c
#define	rPMAC_TxMACHeader0	0x120
#define	rPMAC_TxMACHeader1	0x124
#define	rPMAC_TxMACHeader2	0x128
#define	rPMAC_TxMACHeader3	0x12c
#define	rPMAC_TxMACHeader4	0x130
#define	rPMAC_TxMACHeader5	0x134
#define	rPMAC_TxDataType	0x138
#define	rPMAC_TxRandomSeed	0x13c
#define	rPMAC_CCKPLCPPreamble	0x140
#define	rPMAC_CCKPLCPHeader	0x144
#define	rPMAC_CCKCRC16		0x148
#define	rPMAC_OFDMRxCRC32OK	0x170
#define	rPMAC_OFDMRxCRC32Er	0x174
#define	rPMAC_OFDMRxParityEr	0x178
#define	rPMAC_OFDMRxCRC8Er	0x17c
#define	rPMAC_CCKCRxRC16Er	0x180
#define	rPMAC_CCKCRxRC32Er	0x184
#define	rPMAC_CCKCRxRC32OK	0x188
#define	rPMAC_TxStatus		0x18c

/*  */
/*  2. Page2(0x200) */
/*  */
/*  The following two definition are only used for USB interface. */
/* define	RF_BB_CMD_ADDR	0x02c0	 RF/BB read/write command address. */
/* define	RF_BB_CMD_DATA	0x02c4	 RF/BB read/write command data. */

/*  */
/*  3. Page8(0x800) */
/*  */
#define	rFPGA0_RFMOD		0x800	/* RF mode & CCK TxSC RF BW Setting?? */

#define	rFPGA0_TxInfo		0x804	/*  Status report?? */
#define	rFPGA0_PSDFunction	0x808

#define	rFPGA0_TxGainStage	0x80c	/*  Set TX PWR init gain? */

#define	rFPGA0_RFTiming1	0x810	/*  Useless now */
#define	rFPGA0_RFTiming2	0x814
/* define rFPGA0_XC_RFTiming		0x818 */
/* define rFPGA0_XD_RFTiming		0x81c */

#define rFPGA0_XA_HSSIParameter1	0x820	/*  RF 3 wire register */
#define rFPGA0_XA_HSSIParameter2	0x824
#define rFPGA0_XB_HSSIParameter1	0x828
#define rFPGA0_XB_HSSIParameter2	0x82c
#define rFPGA0_XC_HSSIParameter1	0x830
#define rFPGA0_XC_HSSIParameter2	0x834
#define rFPGA0_XD_HSSIParameter1	0x838
#define rFPGA0_XD_HSSIParameter2	0x83c
#define	rFPGA0_XA_LSSIParameter		0x840
#define	rFPGA0_XB_LSSIParameter		0x844
#define	rFPGA0_XC_LSSIParameter		0x848
#define	rFPGA0_XD_LSSIParameter		0x84c

#define	rFPGA0_RFWakeUpParameter		0x850	/*  Useless now */
#define	rFPGA0_RFSleepUpParameter		0x854

#define	rFPGA0_XAB_SwitchControl		0x858	/*  RF Channel switch */
#define	rFPGA0_XCD_SwitchControl		0x85c

#define	rFPGA0_XA_RFInterfaceOE		0x860	/*  RF Channel switch */
#define	rFPGA0_XB_RFInterfaceOE		0x864
#define	rFPGA0_XC_RFInterfaceOE		0x868
#define	rFPGA0_XD_RFInterfaceOE		0x86c

#define	rFPGA0_XAB_RFInterfaceSW		0x870	/*  RF Interface Software Control */
#define	rFPGA0_XCD_RFInterfaceSW		0x874

#define	rFPGA0_XAB_RFParameter		0x878	/*  RF Parameter */
#define	rFPGA0_XCD_RFParameter		0x87c

#define	rFPGA0_AnalogParameter1		0x880	/*  Crystal cap setting RF-R/W protection for parameter4?? */
#define	rFPGA0_AnalogParameter2		0x884
#define	rFPGA0_AnalogParameter3		0x888	/*  Useless now */
#define	rFPGA0_AnalogParameter4		0x88c

#define	rFPGA0_XA_LSSIReadBack		0x8a0	/*  Tranceiver LSSI Readback */
#define	rFPGA0_XB_LSSIReadBack		0x8a4
#define	rFPGA0_XC_LSSIReadBack		0x8a8
#define	rFPGA0_XD_LSSIReadBack		0x8ac

#define	rFPGA0_PSDReport				0x8b4	/*  Useless now */
#define	rFPGA0_XAB_RFInterfaceRB		0x8e0	/*  Useless now RF Interface Readback Value */
#define	rFPGA0_XCD_RFInterfaceRB		0x8e4	/*  Useless now */

/*  */
/*  4. Page9(0x900) */
/*  */
#define	rFPGA1_RFMOD				0x900	/* RF mode & OFDM TxSC RF BW Setting?? */

#define	rFPGA1_TxBlock				0x904	/*  Useless now */
#define	rFPGA1_DebugSelect			0x908	/*  Useless now */
#define	rFPGA1_TxInfo				0x90c	/*  Useless now Status report?? */

/*  */
/*  5. PageA(0xA00) */
/*  */
/*  Set Control channel to upper or lower. These settings are required only for 40MHz */
#define	rCCK0_System				0xa00

#define	rCCK0_AFESetting			0xa04	/*  Disable init gain now Select RX path by RSSI */
#define	rCCK0_CCA					0xa08	/*  Disable init gain now Init gain */

#define	rCCK0_RxAGC1			0xa0c	/* AGC default value, saturation level Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series */
#define	rCCK0_RxAGC2			0xa10	/* AGC & DAGC */

#define	rCCK0_RxHP			0xa14

#define	rCCK0_DSPParameter1		0xa18	/* Timing recovery & Channel estimation threshold */
#define	rCCK0_DSPParameter2		0xa1c	/* SQ threshold */

#define	rCCK0_TxFilter1			0xa20
#define	rCCK0_TxFilter2			0xa24
#define	rCCK0_DebugPort			0xa28	/* debug port and Tx filter3 */
#define	rCCK0_FalseAlarmReport		0xa2c	/* 0xa2d	useless now 0xa30-a4f channel report */
#define	rCCK0_TRSSIReport		0xa50
#define	rCCK0_RxReport			0xa54  /* 0xa57 */
#define	rCCK0_FACounterLower		0xa5c  /* 0xa5b */
#define	rCCK0_FACounterUpper		0xa58  /* 0xa5c */

/*  */
/*  6. PageC(0xC00) */
/*  */
#define	rOFDM0_LSTF			0xc00

#define	rOFDM0_TRxPathEnable		0xc04
#define	rOFDM0_TRMuxPar			0xc08
#define	rOFDM0_TRSWIsolation		0xc0c

#define	rOFDM0_XARxAFE			0xc10  /* RxIQ DC offset, Rx digital filter, DC notch filter */
#define	rOFDM0_XARxIQImbalance		0xc14  /* RxIQ imbalance matrix */
#define	rOFDM0_XBRxAFE			0xc18
#define	rOFDM0_XBRxIQImbalance		0xc1c
#define	rOFDM0_XCRxAFE			0xc20
#define	rOFDM0_XCRxIQImbalance		0xc24
#define	rOFDM0_XDRxAFE			0xc28
#define	rOFDM0_XDRxIQImbalance		0xc2c

#define	rOFDM0_RxDetector1		0xc30  /* PD,BW & SBD	DM tune init gain */
#define	rOFDM0_RxDetector2		0xc34  /* SBD & Fame Sync. */
#define	rOFDM0_RxDetector3		0xc38  /* Frame Sync. */
#define	rOFDM0_RxDetector4		0xc3c  /* PD, SBD, Frame Sync & Short-GI */

#define	rOFDM0_RxDSP			0xc40  /* Rx Sync Path */
#define	rOFDM0_CFOandDAGC		0xc44  /* CFO & DAGC */
#define	rOFDM0_CCADropThreshold		0xc48 /* CCA Drop threshold */
#define	rOFDM0_ECCAThreshold		0xc4c /*  energy CCA */

#define	rOFDM0_XAAGCCore1		0xc50	/*  DIG */
#define	rOFDM0_XAAGCCore2		0xc54
#define	rOFDM0_XBAGCCore1		0xc58
#define	rOFDM0_XBAGCCore2		0xc5c
#define	rOFDM0_XCAGCCore1		0xc60
#define	rOFDM0_XCAGCCore2		0xc64
#define	rOFDM0_XDAGCCore1		0xc68
#define	rOFDM0_XDAGCCore2		0xc6c

#define	rOFDM0_AGCParameter1		0xc70
#define	rOFDM0_AGCParameter2		0xc74
#define	rOFDM0_AGCRSSITable		0xc78
#define	rOFDM0_HTSTFAGC			0xc7c

#define	rOFDM0_XATxIQImbalance		0xc80	/*  TX PWR TRACK and DIG */
#define	rOFDM0_XATxAFE			0xc84
#define	rOFDM0_XBTxIQImbalance		0xc88
#define	rOFDM0_XBTxAFE			0xc8c
#define	rOFDM0_XCTxIQImbalance		0xc90
#define	rOFDM0_XCTxAFE			0xc94
#define	rOFDM0_XDTxIQImbalance		0xc98
#define	rOFDM0_XDTxAFE			0xc9c
#define	rOFDM0_RxIQExtAnta		0xca0

#define	rOFDM0_RxHPParameter		0xce0
#define	rOFDM0_TxPseudoNoiseWgt		0xce4
#define	rOFDM0_FrameSync		0xcf0
#define	rOFDM0_DFSReport		0xcf4
#define	rOFDM0_TxCoeff1			0xca4
#define	rOFDM0_TxCoeff2			0xca8
#define	rOFDM0_TxCoeff3			0xcac
#define	rOFDM0_TxCoeff4			0xcb0
#define	rOFDM0_TxCoeff5			0xcb4
#define	rOFDM0_TxCoeff6			0xcb8

/*  7. PageD(0xD00) */
#define	rOFDM1_LSTF			0xd00
#define	rOFDM1_TRxPathEnable		0xd04

#define	rOFDM1_CFO			0xd08	/*  No setting now */
#define	rOFDM1_CSI1			0xd10
#define	rOFDM1_SBD			0xd14
#define	rOFDM1_CSI2			0xd18
#define	rOFDM1_CFOTracking		0xd2c
#define	rOFDM1_TRxMesaure1		0xd34
#define	rOFDM1_IntfDet			0xd3c
#define	rOFDM1_PseudoNoiseStateAB	0xd50
#define	rOFDM1_PseudoNoiseStateCD	0xd54
#define	rOFDM1_RxPseudoNoiseWgt		0xd58

#define	rOFDM_PHYCounter1		0xda0  /* cca, parity fail */
#define	rOFDM_PHYCounter2		0xda4  /* rate illegal, crc8 fail */
#define	rOFDM_PHYCounter3		0xda8  /* MCS not support */

#define	rOFDM_ShortCFOAB		0xdac	/*  No setting now */
#define	rOFDM_ShortCFOCD		0xdb0
#define	rOFDM_LongCFOAB			0xdb4
#define	rOFDM_LongCFOCD			0xdb8
#define	rOFDM_TailCFOAB			0xdbc
#define	rOFDM_TailCFOCD			0xdc0
#define	rOFDM_PWMeasure1		0xdc4
#define	rOFDM_PWMeasure2		0xdc8
#define	rOFDM_BWReport			0xdcc
#define	rOFDM_AGCReport			0xdd0
#define	rOFDM_RxSNR			0xdd4
#define	rOFDM_RxEVMCSI			0xdd8
#define	rOFDM_SIGReport			0xddc


/*  */
/*  8. PageE(0xE00) */
/*  */
#define	rTxAGC_Rate18_06		0xe00
#define	rTxAGC_Rate54_24		0xe04
#define	rTxAGC_CCK_Mcs32		0xe08
#define	rTxAGC_Mcs03_Mcs00		0xe10
#define	rTxAGC_Mcs07_Mcs04		0xe14
#define	rTxAGC_Mcs11_Mcs08		0xe18
#define	rTxAGC_Mcs15_Mcs12		0xe1c

/*  Analog- control in RX_WAIT_CCA : REG: EE0 [Analog- Power & Control Register] */
#define		rRx_Wait_CCCA		0xe70
#define	rAnapar_Ctrl_BB			0xee0

/*  */
/*  7. RF Register 0x00-0x2E (RF 8256) */
/*     RF-0222D 0x00-3F */
/*  */
/* Zebra1 */
#define RTL92SE_FPGA_VERIFY 0
#define	rZebra1_HSSIEnable		0x0	/*  Useless now */
#define	rZebra1_TRxEnable1		0x1
#define	rZebra1_TRxEnable2		0x2
#define	rZebra1_AGC			0x4
#define	rZebra1_ChargePump		0x5
/* if (RTL92SE_FPGA_VERIFY == 1) */
#define	rZebra1_Channel			0x7	/*  RF channel switch */
/* else */

/* endif */
#define	rZebra1_TxGain			0x8	/*  Useless now */
#define	rZebra1_TxLPF			0x9
#define	rZebra1_RxLPF			0xb
#define	rZebra1_RxHPFCorner		0xc

/* Zebra4 */
#define	rGlobalCtrl			0	/*  Useless now */
#define	rRTL8256_TxLPF			19
#define	rRTL8256_RxLPF			11

/* RTL8258 */
#define	rRTL8258_TxLPF			0x11	/*  Useless now */
#define	rRTL8258_RxLPF			0x13
#define	rRTL8258_RSSILPF		0xa

/*  */
/*  RL6052 Register definition */
#define	RF_AC				0x00	/*  */

#define	RF_IQADJ_G1			0x01	/*  */
#define	RF_IQADJ_G2			0x02	/*  */
#define	RF_POW_TRSW			0x05	/*  */

#define	RF_GAIN_RX			0x06	/*  */
#define	RF_GAIN_TX			0x07	/*  */

#define	RF_TXM_IDAC			0x08	/*  */
#define	RF_BS_IQGEN			0x0F	/*  */

#define	RF_MODE1			0x10	/*  */
#define	RF_MODE2			0x11	/*  */

#define	RF_RX_AGC_HP			0x12	/*  */
#define	RF_TX_AGC			0x13	/*  */
#define	RF_BIAS				0x14	/*  */
#define	RF_IPA				0x15	/*  */
#define	RF_TXBIAS			0x16 /*  */
#define	RF_POW_ABILITY			0x17	/*  */
#define	RF_MODE_AG			0x18	/*  */
#define	rRfChannel			0x18	/*  RF channel and BW switch */
#define	RF_CHNLBW			0x18	/*  RF channel and BW switch */
#define	RF_TOP				0x19	/*  */

#define	RF_RX_G1			0x1A	/*  */
#define	RF_RX_G2			0x1B	/*  */

#define	RF_RX_BB2			0x1C	/*  */
#define	RF_RX_BB1			0x1D	/*  */

#define	RF_RCK1				0x1E	/*  */
#define	RF_RCK2				0x1F	/*  */

#define	RF_TX_G1			0x20	/*  */
#define	RF_TX_G2			0x21	/*  */
#define	RF_TX_G3			0x22	/*  */

#define	RF_TX_BB1			0x23	/*  */

#define	RF_T_METER			0x24	/*  */

#define	RF_SYN_G1			0x25	/*  RF TX Power control */
#define	RF_SYN_G2			0x26	/*  RF TX Power control */
#define	RF_SYN_G3			0x27	/*  RF TX Power control */
#define	RF_SYN_G4			0x28	/*  RF TX Power control */
#define	RF_SYN_G5			0x29	/*  RF TX Power control */
#define	RF_SYN_G6			0x2A	/*  RF TX Power control */
#define	RF_SYN_G7			0x2B	/*  RF TX Power control */
#define	RF_SYN_G8			0x2C	/*  RF TX Power control */

#define	RF_RCK_OS			0x30	/*  RF TX PA control */
#define	RF_TXPA_G1			0x31	/*  RF TX PA control */
#define	RF_TXPA_G2			0x32	/*  RF TX PA control */
#define	RF_TXPA_G3			0x33	/*  RF TX PA control */

/*  */
/* Bit Mask */
/*  */
/*  1. Page1(0x100) */
#define	bBBResetB			0x100	/*  Useless now? */
#define	bGlobalResetB			0x200
#define	bOFDMTxStart			0x4
#define	bCCKTxStart			0x8
#define	bCRC32Debug			0x100
#define	bPMACLoopback			0x10
#define	bTxLSIG				0xffffff
#define	bOFDMTxRate			0xf
#define	bOFDMTxReserved			0x10
#define	bOFDMTxLength			0x1ffe0
#define	bOFDMTxParity			0x20000
#define	bTxHTSIG1			0xffffff
#define	bTxHTMCSRate			0x7f
#define	bTxHTBW				0x80
#define	bTxHTLength			0xffff00
#define	bTxHTSIG2			0xffffff
#define	bTxHTSmoothing			0x1
#define	bTxHTSounding			0x2
#define	bTxHTReserved			0x4
#define	bTxHTAggreation			0x8
#define	bTxHTSTBC			0x30
#define	bTxHTAdvanceCoding		0x40
#define	bTxHTShortGI			0x80
#define	bTxHTNumberHT_LTF		0x300
#define	bTxHTCRC8			0x3fc00
#define	bCounterReset			0x10000
#define	bNumOfOFDMTx			0xffff
#define	bNumOfCCKTx			0xffff0000
#define	bTxIdleInterval			0xffff
#define	bOFDMService			0xffff0000
#define	bTxMACHeader			0xffffffff
#define	bTxDataInit			0xff
#define	bTxHTMode			0x100
#define	bTxDataType			0x30000
#define	bTxRandomSeed			0xffffffff
#define	bCCKTxPreamble			0x1
#define	bCCKTxSFD			0xffff0000
#define	bCCKTxSIG			0xff
#define	bCCKTxService			0xff00
#define	bCCKLengthExt			0x8000
#define	bCCKTxLength			0xffff0000
#define	bCCKTxCRC16			0xffff
#define	bCCKTxStatus			0x1
#define	bOFDMTxStatus			0x2

#define		IS_BB_REG_OFFSET_92S(_Offset)		((_Offset >= 0x800) && (_Offset <= 0xfff))

/*  2. Page8(0x800) */
#define	bRFMOD				0x1	/*  Reg 0x800 rFPGA0_RFMOD */
#define	bJapanMode			0x2
#define	bCCKTxSC			0x30
#define	bCCKEn				0x1000000
#define	bOFDMEn				0x2000000

#define	bOFDMRxADCPhase			0x10000	/*  Useless now */
#define	bOFDMTxDACPhase			0x40000
#define	bXATxAGC			0x3f

#define	bXBTxAGC			0xf00	/*  Reg 80c rFPGA0_TxGainStage */
#define	bXCTxAGC			0xf000
#define	bXDTxAGC			0xf0000

#define	bPAStart			0xf0000000	/*  Useless now */
#define	bTRStart			0x00f00000
#define	bRFStart			0x0000f000
#define	bBBStart			0x000000f0
#define	bBBCCKStart			0x0000000f
#define	bPAEnd				0xf	  /* Reg0x814 */
#define	bTREnd				0x0f000000
#define	bRFEnd				0x000f0000
#define	bCCAMask			0x000000f0   /* T2R */
#define	bR2RCCAMask			0x00000f00
#define	bHSSI_R2TDelay			0xf8000000
#define	bHSSI_T2RDelay			0xf80000
#define	bContTxHSSI			0x400     /* chane gain at continue Tx */
#define	bIGFromCCK			0x200
#define	bAGCAddress			0x3f
#define	bRxHPTx				0x7000
#define	bRxHPT2R			0x38000
#define	bRxHPCCKIni			0xc0000
#define	bAGCTxCode			0xc00000
#define	bAGCRxCode			0x300000

#define	b3WireDataLength		0x800	/*  Reg 0x820~84f rFPGA0_XA_HSSIParameter1 */
#define	b3WireAddressLength		0x400

#define	b3WireRFPowerDown		0x1	/*  Useless now */
/* define bHWSISelect			0x8 */
#define	b5GPAPEPolarity			0x40000000
#define	b2GPAPEPolarity			0x80000000
#define	bRFSW_TxDefaultAnt		0x3
#define	bRFSW_TxOptionAnt		0x30
#define	bRFSW_RxDefaultAnt		0x300
#define	bRFSW_RxOptionAnt		0x3000
#define	bRFSI_3WireData			0x1
#define	bRFSI_3WireClock		0x2
#define	bRFSI_3WireLoad			0x4
#define	bRFSI_3WireRW			0x8
#define	bRFSI_3Wire			0xf

#define	bRFSI_RFENV			0x10	/*  Reg 0x870 rFPGA0_XAB_RFInterfaceSW */

#define	bRFSI_TRSW			0x20	/*  Useless now */
#define	bRFSI_TRSWB			0x40
#define	bRFSI_ANTSW			0x100
#define	bRFSI_ANTSWB			0x200
#define	bRFSI_PAPE			0x400
#define	bRFSI_PAPE5G			0x800
#define	bBandSelect			0x1
#define	bHTSIG2_GI			0x80
#define	bHTSIG2_Smoothing		0x01
#define	bHTSIG2_Sounding		0x02
#define	bHTSIG2_Aggreaton		0x08
#define	bHTSIG2_STBC			0x30
#define	bHTSIG2_AdvCoding		0x40
#define	bHTSIG2_NumOfHTLTF		0x300
#define	bHTSIG2_CRC8			0x3fc
#define	bHTSIG1_MCS			0x7f
#define	bHTSIG1_BandWidth		0x80
#define	bHTSIG1_HTLength		0xffff
#define	bLSIG_Rate			0xf
#define	bLSIG_Reserved			0x10
#define	bLSIG_Length			0x1fffe
#define	bLSIG_Parity			0x20
#define	bCCKRxPhase			0x4
#if (RTL92SE_FPGA_VERIFY == 1)
#define	bLSSIReadAddress		0x3f000000   /* LSSI "Read" Address
						      * Reg 0x824 rFPGA0_XA_HSSIParameter2
						      */
#else
#define	bLSSIReadAddress		0x7f800000   /*  T65 RF */
#endif
#define	bLSSIReadEdge			0x80000000   /* LSSI "Read" edge signal */
#if (RTL92SE_FPGA_VERIFY == 1)
#define	bLSSIReadBackData		0xfff	/*  Reg 0x8a0
						 * rFPGA0_XA_LSSIReadBack
						 */
#else
#define	bLSSIReadBackData		0xfffff	/*  T65 RF */
#endif
#define	bLSSIReadOKFlag			0x1000	/*  Useless now */
#define	bCCKSampleRate			0x8       /* 0: 44MHz, 1:88MHz */
#define	bRegulator0Standby		0x1
#define	bRegulatorPLLStandby		0x2
#define	bRegulator1Standby		0x4
#define	bPLLPowerUp			0x8
#define	bDPLLPowerUp			0x10
#define	bDA10PowerUp			0x20
#define	bAD7PowerUp			0x200
#define	bDA6PowerUp			0x2000
#define	bXtalPowerUp			0x4000
#define	b40MDClkPowerUP			0x8000
#define	bDA6DebugMode			0x20000
#define	bDA6Swing			0x380000

#define	bADClkPhase			0x4000000	/*  Reg 0x880
							 * rFPGA0_AnalogParameter1 20/40 CCK
							 * support switch 40/80 BB MHZ
							 */

#define	b80MClkDelay			0x18000000	/*  Useless */
#define	bAFEWatchDogEnable		0x20000000

#define	bXtalCap01			0xc0000000	/*  Reg 0x884
							 * rFPGA0_AnalogParameter2 Crystal cap
							 */
#define	bXtalCap23			0x3
#define	bXtalCap92x			0x0f000000
#define		bXtalCap		0x0f000000

#define	bIntDifClkEnable		0x400	/*  Useless */
#define	bExtSigClkEnable		0x800
#define	bBandgapMbiasPowerUp		0x10000
#define	bAD11SHGain			0xc0000
#define	bAD11InputRange			0x700000
#define	bAD11OPCurrent			0x3800000
#define	bIPathLoopback			0x4000000
#define	bQPathLoopback			0x8000000
#define	bAFELoopback			0x10000000
#define	bDA10Swing			0x7e0
#define	bDA10Reverse			0x800
#define	bDAClkSource			0x1000
#define	bAD7InputRange			0x6000
#define	bAD7Gain			0x38000
#define	bAD7OutputCMMode		0x40000
#define	bAD7InputCMMode			0x380000
#define	bAD7Current			0xc00000
#define	bRegulatorAdjust		0x7000000
#define	bAD11PowerUpAtTx		0x1
#define	bDA10PSAtTx			0x10
#define	bAD11PowerUpAtRx		0x100
#define	bDA10PSAtRx			0x1000
#define	bCCKRxAGCFormat			0x200
#define	bPSDFFTSamplepPoint		0xc000
#define	bPSDAverageNum			0x3000
#define	bIQPathControl			0xc00
#define	bPSDFreq			0x3ff
#define	bPSDAntennaPath			0x30
#define	bPSDIQSwitch			0x40
#define	bPSDRxTrigger			0x400000
#define	bPSDTxTrigger			0x80000000
#define	bPSDSineToneScale		0x7f000000
#define	bPSDReport			0xffff

/*  3. Page9(0x900) */
#define	bOFDMTxSC			0x30000000	/*  Useless */
#define	bCCKTxOn			0x1
#define	bOFDMTxOn			0x2
#define	bDebugPage			0xfff  /* reset debug page and HWord,
						* LWord
						*/
#define	bDebugItem			0xff   /* reset debug page and LWord */
#define	bAntL				0x10
#define	bAntNonHT			0x100
#define	bAntHT1				0x1000
#define	bAntHT2				0x10000
#define	bAntHT1S1			0x100000
#define	bAntNonHTS1			0x1000000

/*  4. PageA(0xA00) */
#define	bCCKBBMode			0x3	/*  Useless */
#define	bCCKTxPowerSaving		0x80
#define	bCCKRxPowerSaving		0x40

#define	bCCKSideBand			0x10	/* Reg 0xa00 rCCK0 20/40 sw */

#define	bCCKScramble			0x8	/*  Useless */
#define	bCCKAntDiversity		0x8000
#define	bCCKCarrierRecovery		0x4000
#define	bCCKTxRate			0x3000
#define	bCCKDCCancel			0x0800
#define	bCCKISICancel			0x0400
#define	bCCKMatchFilter			0x0200
#define	bCCKEqualizer			0x0100
#define	bCCKPreambleDetect		0x800000
#define	bCCKFastFalseCCA		0x400000
#define	bCCKChEstStart			0x300000
#define	bCCKCCACount			0x080000
#define	bCCKcs_lim			0x070000
#define	bCCKBistMode			0x80000000
#define	bCCKCCAMask			0x40000000
#define	bCCKTxDACPhase			0x4
#define	bCCKRxADCPhase			0x20000000   /* r_rx_clk */
#define	bCCKr_cp_mode0			0x0100
#define	bCCKTxDCOffset			0xf0
#define	bCCKRxDCOffset			0xf
#define	bCCKCCAMode			0xc000
#define	bCCKFalseCS_lim			0x3f00
#define	bCCKCS_ratio			0xc00000
#define	bCCKCorgBit_sel			0x300000
#define	bCCKPD_lim			0x0f0000
#define	bCCKNewCCA			0x80000000
#define	bCCKRxHPofIG			0x8000
#define	bCCKRxIG			0x7f00
#define	bCCKLNAPolarity			0x800000
#define	bCCKRx1stGain			0x7f0000
#define	bCCKRFExtend			0x20000000 /* CCK Rx init gain polar */
#define	bCCKRxAGCSatLevel		0x1f000000
#define	bCCKRxAGCSatCount		0xe0
#define	bCCKRxRFSettle			0x1f       /* AGCsamp_dly */
#define	bCCKFixedRxAGC			0x8000
#define	bCCKAntennaPolarity		0x2000
#define	bCCKTxFilterType		0x0c00
#define	bCCKRxAGCReportType		0x0300
#define	bCCKRxDAGCEn			0x80000000
#define	bCCKRxDAGCPeriod		0x20000000
#define	bCCKRxDAGCSatLevel		0x1f000000
#define	bCCKTimingRecovery		0x800000
#define	bCCKTxC0			0x3f0000
#define	bCCKTxC1			0x3f000000
#define	bCCKTxC2			0x3f
#define	bCCKTxC3			0x3f00
#define	bCCKTxC4			0x3f0000
#define	bCCKTxC5			0x3f000000
#define	bCCKTxC6			0x3f
#define	bCCKTxC7			0x3f00
#define	bCCKDebugPort			0xff0000
#define	bCCKDACDebug			0x0f000000
#define	bCCKFalseAlarmEnable		0x8000
#define	bCCKFalseAlarmRead		0x4000
#define	bCCKTRSSI			0x7f
#define	bCCKRxAGCReport			0xfe
#define	bCCKRxReport_AntSel		0x80000000
#define	bCCKRxReport_MFOff		0x40000000
#define	bCCKRxRxReport_SQLoss		0x20000000
#define	bCCKRxReport_Pktloss		0x10000000
#define	bCCKRxReport_Lockedbit		0x08000000
#define	bCCKRxReport_RateError		0x04000000
#define	bCCKRxReport_RxRate		0x03000000
#define	bCCKRxFACounterLower		0xff
#define	bCCKRxFACounterUpper		0xff000000
#define	bCCKRxHPAGCStart		0xe000
#define	bCCKRxHPAGCFinal		0x1c00
#define	bCCKRxFalseAlarmEnable		0x8000
#define	bCCKFACounterFreeze		0x4000
#define	bCCKTxPathSel			0x10000000
#define	bCCKDefaultRxPath		0xc000000
#define	bCCKOptionRxPath		0x3000000

/*  5. PageC(0xC00) */
#define	bNumOfSTF			0x3	/*  Useless */
#define	bShift_L			0xc0
#define	bGI_TH				0xc
#define	bRxPathA			0x1
#define	bRxPathB			0x2
#define	bRxPathC			0x4
#define	bRxPathD			0x8
#define	bTxPathA			0x1
#define	bTxPathB			0x2
#define	bTxPathC			0x4
#define	bTxPathD			0x8
#define	bTRSSIFreq			0x200
#define	bADCBackoff			0x3000
#define	bDFIRBackoff			0xc000
#define	bTRSSILatchPhase		0x10000
#define	bRxIDCOffset			0xff
#define	bRxQDCOffset			0xff00
#define	bRxDFIRMode			0x1800000
#define	bRxDCNFType			0xe000000
#define	bRXIQImb_A			0x3ff
#define	bRXIQImb_B			0xfc00
#define	bRXIQImb_C			0x3f0000
#define	bRXIQImb_D			0xffc00000
#define	bDC_dc_Notch			0x60000
#define	bRxNBINotch			0x1f000000
#define	bPD_TH				0xf
#define	bPD_TH_Opt2			0xc000
#define	bPWED_TH			0x700
#define	bIfMF_Win_L			0x800
#define	bPD_Option			0x1000
#define	bMF_Win_L			0xe000
#define	bBW_Search_L			0x30000
#define	bwin_enh_L			0xc0000
#define	bBW_TH				0x700000
#define	bED_TH2				0x3800000
#define	bBW_option			0x4000000
#define	bRatio_TH			0x18000000
#define	bWindow_L			0xe0000000
#define	bSBD_Option			0x1
#define	bFrame_TH			0x1c
#define	bFS_Option			0x60
#define	bDC_Slope_check			0x80
#define	bFGuard_Counter_DC_L		0xe00
#define	bFrame_Weight_Short		0x7000
#define	bSub_Tune			0xe00000
#define	bFrame_DC_Length		0xe000000
#define	bSBD_start_offset		0x30000000
#define	bFrame_TH_2			0x7
#define	bFrame_GI2_TH			0x38
#define	bGI2_Sync_en			0x40
#define	bSarch_Short_Early		0x300
#define	bSarch_Short_Late		0xc00
#define	bSarch_GI2_Late			0x70000
#define	bCFOAntSum			0x1
#define	bCFOAcc				0x2
#define	bCFOStartOffset			0xc
#define	bCFOLookBack			0x70
#define	bCFOSumWeight			0x80
#define	bDAGCEnable			0x10000
#define	bTXIQImb_A			0x3ff
#define	bTXIQImb_B			0xfc00
#define	bTXIQImb_C			0x3f0000
#define	bTXIQImb_D			0xffc00000
#define	bTxIDCOffset			0xff
#define	bTxQDCOffset			0xff00
#define	bTxDFIRMode			0x10000
#define	bTxPesudoNoiseOn		0x4000000
#define	bTxPesudoNoise_A		0xff
#define	bTxPesudoNoise_B		0xff00
#define	bTxPesudoNoise_C		0xff0000
#define	bTxPesudoNoise_D		0xff000000
#define	bCCADropOption			0x20000
#define	bCCADropThres			0xfff00000
#define	bEDCCA_H			0xf
#define	bEDCCA_L			0xf0
#define	bLambda_ED			0x300
#define	bRxInitialGain			0x7f
#define	bRxAntDivEn			0x80
#define	bRxAGCAddressForLNA		0x7f00
#define	bRxHighPowerFlow		0x8000
#define	bRxAGCFreezeThres		0xc0000
#define	bRxFreezeStep_AGC1		0x300000
#define	bRxFreezeStep_AGC2		0xc00000
#define	bRxFreezeStep_AGC3		0x3000000
#define	bRxFreezeStep_AGC0		0xc000000
#define	bRxRssi_Cmp_En			0x10000000
#define	bRxQuickAGCEn			0x20000000
#define	bRxAGCFreezeThresMode		0x40000000
#define	bRxOverFlowCheckType		0x80000000
#define	bRxAGCShift			0x7f
#define	bTRSW_Tri_Only			0x80
#define	bPowerThres			0x300
#define	bRxAGCEn			0x1
#define	bRxAGCTogetherEn		0x2
#define	bRxAGCMin			0x4
#define	bRxHP_Ini			0x7
#define	bRxHP_TRLNA			0x70
#define	bRxHP_RSSI			0x700
#define	bRxHP_BBP1			0x7000
#define	bRxHP_BBP2			0x70000
#define	bRxHP_BBP3			0x700000
#define	bRSSI_H				0x7f0000     /* thresh for hi power */
#define	bRSSI_Gen			0x7f000000   /* thresh for ant div */
#define	bRxSettle_TRSW			0x7
#define	bRxSettle_LNA			0x38
#define	bRxSettle_RSSI			0x1c0
#define	bRxSettle_BBP			0xe00
#define	bRxSettle_RxHP			0x7000
#define	bRxSettle_AntSW_RSSI		0x38000
#define	bRxSettle_AntSW			0xc0000
#define	bRxProcessTime_DAGC		0x300000
#define	bRxSettle_HSSI			0x400000
#define	bRxProcessTime_BBPPW		0x800000
#define	bRxAntennaPowerShift    0x3000000
#define	bRSSITableSelect	0xc000000
#define	bRxHP_Final	     0x7000000
#define	bRxHTSettle_BBP	 0x7
#define	bRxHTSettle_HSSI	0x8
#define	bRxHTSettle_RxHP	0x70
#define	bRxHTSettle_BBPPW       0x80
#define	bRxHTSettle_Idle	0x300
#define	bRxHTSettle_Reserved    0x1c00
#define	bRxHTRxHPEn	     0x8000
#define	bRxHTAGCFreezeThres     0x30000
#define	bRxHTAGCTogetherEn      0x40000
#define	bRxHTAGCMin	     0x80000
#define	bRxHTAGCEn	      0x100000
#define	bRxHTDAGCEn	     0x200000
#define	bRxHTRxHP_BBP	   0x1c00000
#define	bRxHTRxHP_Final	 0xe0000000
#define	bRxPWRatioTH	    0x3
#define	bRxPWRatioEn	    0x4
#define	bRxMFHold	       0x3800
#define	bRxPD_Delay_TH1	 0x38
#define	bRxPD_Delay_TH2	 0x1c0
#define	bRxPD_DC_COUNT_MAX      0x600
/* define bRxMF_Hold	     0x3800 */
#define	bRxPD_Delay_TH	  0x8000
#define	bRxProcess_Delay	0xf0000
#define	bRxSearchrange_GI2_Early 0x700000
#define	bRxFrame_Guard_Counter_L 0x3800000
#define	bRxSGI_Guard_L	  0xc000000
#define	bRxSGI_Search_L	 0x30000000
#define	bRxSGI_TH	       0xc0000000
#define	bDFSCnt0		0xff
#define	bDFSCnt1		0xff00
#define	bDFSFlag		0xf0000
#define	bMFWeightSum	    0x300000
#define	bMinIdxTH	       0x7f000000
#define	bDAFormat	       0x40000
#define	bTxChEmuEnable	  0x01000000
#define	bTRSWIsolation_A	0x7f
#define	bTRSWIsolation_B	0x7f00
#define	bTRSWIsolation_C	0x7f0000
#define	bTRSWIsolation_D	0x7f000000
#define	bExtLNAGain	     0x7c00

/*  6. PageE(0xE00) */
#define	bSTBCEn			0x4	/*  Useless */
#define	bAntennaMapping	  0x10
#define	bNss		     0x20
#define	bCFOAntSumD	      0x200
#define	bPHYCounterReset	 0x8000000
#define	bCFOReportGet	    0x4000000
#define	bOFDMContinueTx	  0x10000000
#define	bOFDMSingleCarrier       0x20000000
#define	bOFDMSingleTone	  0x40000000
/* define bRxPath1		 0x01 */
/* define bRxPath2		 0x02 */
/* define bRxPath3		 0x04 */
/* define bRxPath4		 0x08 */
/* define bTxPath1		 0x10 */
/* define bTxPath2		 0x20 */
#define	bHTDetect		0x100
#define	bCFOEn		   0x10000
#define	bCFOValue		0xfff00000
#define	bSigTone_Re	      0x3f
#define	bSigTone_Im	      0x7f00
#define	bCounter_CCA	     0xffff
#define	bCounter_ParityFail      0xffff0000
#define	bCounter_RateIllegal     0xffff
#define	bCounter_CRC8Fail	0xffff0000
#define	bCounter_MCSNoSupport    0xffff
#define	bCounter_FastSync	0xffff
#define	bShortCFO		0xfff
#define	bShortCFOTLength	 12   /* total */
#define	bShortCFOFLength	 11   /* fraction */
#define	bLongCFO		 0x7ff
#define	bLongCFOTLength	  11
#define	bLongCFOFLength	  11
#define	bTailCFO		 0x1fff
#define	bTailCFOTLength	  13
#define	bTailCFOFLength	  12
#define	bmax_en_pwdB	     0xffff
#define	bCC_power_dB	     0xffff0000
#define	bnoise_pwdB	      0xffff
#define	bPowerMeasTLength	10
#define	bPowerMeasFLength	3
#define	bRx_HT_BW		0x1
#define	bRxSC		    0x6
#define	bRx_HT		   0x8
#define	bNB_intf_det_on	  0x1
#define	bIntf_win_len_cfg	0x30
#define	bNB_Intf_TH_cfg	  0x1c0
#define	bRFGain		  0x3f
#define	bTableSel		0x40
#define	bTRSW		    0x80
#define	bRxSNR_A		 0xff
#define	bRxSNR_B		 0xff00
#define	bRxSNR_C		 0xff0000
#define	bRxSNR_D		 0xff000000
#define	bSNREVMTLength	   8
#define	bSNREVMFLength	   1
#define	bCSI1st		  0xff
#define	bCSI2nd		  0xff00
#define	bRxEVM1st		0xff0000
#define	bRxEVM2nd		0xff000000
#define	bSIGEVM		  0xff
#define	bPWDB		    0xff00
#define	bSGIEN		   0x10000

#define	bSFactorQAM1	     0xf	/*  Useless */
#define	bSFactorQAM2	     0xf0
#define	bSFactorQAM3	     0xf00
#define	bSFactorQAM4	     0xf000
#define	bSFactorQAM5	     0xf0000
#define	bSFactorQAM6	     0xf0000
#define	bSFactorQAM7	     0xf00000
#define	bSFactorQAM8	     0xf000000
#define	bSFactorQAM9	     0xf0000000
#define	bCSIScheme	       0x100000

#define	bNoiseLvlTopSet	  0x3	/*  Useless */
#define	bChSmooth		0x4
#define	bChSmoothCfg1	    0x38
#define	bChSmoothCfg2	    0x1c0
#define	bChSmoothCfg3	    0xe00
#define	bChSmoothCfg4	    0x7000
#define	bMRCMode		 0x800000
#define	bTHEVMCfg		0x7000000

#define	bLoopFitType	     0x1	/*  Useless */
#define	bUpdCFO		  0x40
#define	bUpdCFOOffData	   0x80
#define	bAdvUpdCFO	       0x100
#define	bAdvTimeCtrl	     0x800
#define	bUpdClko		 0x1000
#define	bFC		      0x6000
#define	bTrackingMode	    0x8000
#define	bPhCmpEnable	     0x10000
#define	bUpdClkoLTF	      0x20000
#define	bComChCFO		0x40000
#define	bCSIEstiMode	     0x80000
#define	bAdvUpdEqz	       0x100000
#define	bUChCfg		  0x7000000
#define	bUpdEqz		  0x8000000

#define	bTxAGCRate18_06			0x7f7f7f7f	/*  Useless */
#define	bTxAGCRate54_24			0x7f7f7f7f
#define	bTxAGCRateMCS32			0x7f
#define	bTxAGCRateCCK			0x7f00
#define	bTxAGCRateMCS3_MCS0		0x7f7f7f7f
#define	bTxAGCRateMCS7_MCS4		0x7f7f7f7f
#define	bTxAGCRateMCS11_MCS8	0x7f7f7f7f
#define	bTxAGCRateMCS15_MCS12	0x7f7f7f7f

/* Rx Pseduo noise */
#define	bRxPesudoNoiseOn	 0x20000000	/*  Useless */
#define	bRxPesudoNoise_A	 0xff
#define	bRxPesudoNoise_B	 0xff00
#define	bRxPesudoNoise_C	 0xff0000
#define	bRxPesudoNoise_D	 0xff000000
#define	bPesudoNoiseState_A      0xffff
#define	bPesudoNoiseState_B      0xffff0000
#define	bPesudoNoiseState_C      0xffff
#define	bPesudoNoiseState_D      0xffff0000

/* 7. RF Register */
/* Zebra1 */
#define	bZebra1_HSSIEnable	0x8		/*  Useless */
#define	bZebra1_TRxControl	0xc00
#define	bZebra1_TRxGainSetting    0x07f
#define	bZebra1_RxCorner	  0xc00
#define	bZebra1_TxChargePump      0x38
#define	bZebra1_RxChargePump      0x7
#define	bZebra1_ChannelNum	0xf80
#define	bZebra1_TxLPFBW	   0x400
#define	bZebra1_RxLPFBW	   0x600

/* Zebra4 */
#define	bRTL8256RegModeCtrl1      0x100	/*  Useless */
#define	bRTL8256RegModeCtrl0      0x40
#define	bRTL8256_TxLPFBW	  0x18
#define	bRTL8256_RxLPFBW	  0x600

/* RTL8258 */
#define	bRTL8258_TxLPFBW	  0xc	/*  Useless */
#define	bRTL8258_RxLPFBW	  0xc00
#define	bRTL8258_RSSILPFBW	0xc0


/*  */
/*  Other Definition */
/*  */

/* byte endable for sb_write */
#define	bByte0		    0x1	/*  Useless */
#define	bByte1		    0x2
#define	bByte2		    0x4
#define	bByte3		    0x8
#define	bWord0		    0x3
#define	bWord1		    0xc
#define	bDWord		    0xf

/* for PutRegsetting & GetRegSetting BitMask */
#define	bMaskByte0		0xff	/*  Reg 0xc50 rOFDM0_XAAGCCore~0xC6f */
#define	bMaskByte1		0xff00
#define	bMaskByte2		0xff0000
#define	bMaskByte3		0xff000000
#define	bMaskHWord		0xffff0000
#define	bMaskLWord		0x0000ffff
#define	bMaskDWord		0xffffffff
#define	bMaskH4Bits		0xf0000000
#define	bMaskOFDM_D		0xffc00000
#define	bMaskCCK		0x3f3f3f3f
#define	bMask12Bits		0xfff

/* for PutRFRegsetting & GetRFRegSetting BitMask */
#if (RTL92SE_FPGA_VERIFY == 1)
#define		bRFRegOffsetMask	0xfff
#else
#define		bRFRegOffsetMask	0xfffff
#endif
#define	bEnable		0x1	/*  Useless */
#define	bDisabl		0x0

#define	LeftAntenna	0x0	/*  Useless */
#define	RightAntenna	0x1

#define	tCheckTxStatus	500   /* 500ms Useless */
#define	tUpdateRxCounter 100   /* 100ms */

#define	rateCCK     0	/*  Useless */
#define	rateOFDM    1
#define	rateHT      2

/* define Register-End */
#define	bPMAC_End	 0x1ff	/*  Useless */
#define	bFPGAPHY0_End	 0x8ff
#define	bFPGAPHY1_End	 0x9ff
#define	bCCKPHY0_End	 0xaff
#define	bOFDMPHY0_End	 0xcff
#define	bOFDMPHY1_End	 0xdff

/* define max debug item in each debug page */
/* define bMaxItem_FPGA_PHY0	0x9 */
/* define bMaxItem_FPGA_PHY1	0x3 */
/* define bMaxItem_PHY_11B	  0x16 */
/* define bMaxItem_OFDM_PHY0	0x29 */
/* define bMaxItem_OFDM_PHY1	0x0 */

#define	bPMACControl	0x0		/*  Useless */
#define	bWMACControl	0x1
#define	bWNICControl	0x2

#define RCR_AAP		BIT(0)		/*  accept all physical address */
#define RCR_APM		BIT(1)		/*  accept physical match */
#define RCR_AM		BIT(2)		/*  accept multicast */
#define RCR_AB		BIT(3)		/*  accept broadcast */
#define RCR_ACRC32	BIT(5)		/*  accept error packet */
#define RCR_9356SEL	BIT(6)
#define RCR_AICV	BIT(12)		/*  Accept ICV error packet */
#define RCR_RXFTH0	(BIT(13)|BIT(14)|BIT(15))	/*  Rx FIFO threshold */
#define RCR_ADF		BIT(18)		/*  Accept Data(frame type) frame */
#define RCR_ACF		BIT(19)		/*  Accept control frame */
#define RCR_AMF		BIT(20)		/*  Accept management frame */
#define RCR_ADD3	BIT(21)
#define RCR_APWRMGT	BIT(22)		/*  Accept power management packet */
#define RCR_CBSSID	BIT(23)		/*  Accept BSSID match packet */
#define RCR_ENMARP	BIT(28)		/*  enable mac auto reset phy */
#define RCR_EnCS1	BIT(29)		/*  enable carrier sense method 1 */
#define RCR_EnCS2	BIT(30)		/*  enable carrier sense method 2 */
#define RCR_OnlyErlPkt	BIT(31)		/*  Rx Early mode is performed for
					 *  packet size greater than 1536
					 */

/*--------------------------Define Parameters-------------------------------*/


#endif	/* __INC_HAL8192SPHYREG_H */