USB: ftdi_sio.c: remove dbg() tracing calls
dbg() was used a lot a long time ago to trace code flow. Now that we have
ftrace, this isn't needed at all, so remove these calls.
CC: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
CC: Simon Arlott <simon@fire.lp0.eu>
CC: Andrew Worsley <amworsley@gmail.com>
CC: "Michał Wróbel" <michal.wrobel@flytronic.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 02e7f2d..5691b8b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1285,8 +1285,6 @@
unsigned char *buf;
int rv;
- dbg("%s", __func__);
-
buf = kmalloc(1, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -1593,8 +1591,6 @@
struct ftdi_private *priv = usb_get_serial_port_data(port);
int retval = 0;
- dbg("%s", __func__);
-
/* XXX I've no idea if the original SIO supports the event_char
* sysfs parameter, so I'm playing it safe. */
if (priv->chip_type != SIO) {
@@ -1619,8 +1615,6 @@
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- dbg("%s", __func__);
-
/* XXX see create_sysfs_attrs */
if (priv->chip_type != SIO) {
device_remove_file(&port->dev, &dev_attr_event_char);
@@ -1667,8 +1661,6 @@
struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
- dbg("%s", __func__);
-
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
if (!priv) {
dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
@@ -1704,8 +1696,6 @@
/* Called from usbserial:serial_probe */
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
{
- dbg("%s", __func__);
-
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 77;
priv->force_baud = 38400;
@@ -1716,8 +1706,6 @@
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
{
- dbg("%s", __func__);
-
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 240;
priv->force_baud = 38400;
@@ -1767,8 +1755,6 @@
struct usb_device *udev = serial->dev;
struct usb_interface *interface = serial->interface;
- dbg("%s", __func__);
-
if (interface == udev->actconfig->interface[0]) {
dev_info(&udev->dev,
"Ignoring serial port reserved for JTAG\n");
@@ -1782,8 +1768,6 @@
{
struct usb_device *udev = serial->dev;
- dbg("%s", __func__);
-
if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
(udev->product && !strcmp(udev->product, "BeagleBone/XDS100")))
return ftdi_jtag_probe(serial);
@@ -1800,8 +1784,6 @@
struct usb_device *udev = serial->dev;
struct usb_interface *interface = serial->interface;
- dbg("%s", __func__);
-
if (interface == udev->actconfig->interface[2])
return 0;
@@ -1839,8 +1821,6 @@
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- dbg("%s", __func__);
-
priv->dev_gone = true;
wake_up_interruptible_all(&priv->delta_msr_wait);
@@ -1858,8 +1838,6 @@
struct ftdi_private *priv = usb_get_serial_port_data(port);
int result;
- dbg("%s", __func__);
-
/* No error checking for this (will get errors later anyway) */
/* See ftdi_sio.h for description of what is reset */
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -1918,8 +1896,6 @@
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- dbg("%s", __func__);
-
usb_serial_generic_close(port);
kref_put(&priv->kref, ftdi_sio_priv_release);
}
@@ -1976,8 +1952,6 @@
char flag;
char *ch;
- dbg("%s - port %d", __func__, port->number);
-
if (len < 2) {
dbg("malformed packet");
return 0;
@@ -2121,8 +2095,6 @@
unsigned char vstop;
unsigned char vstart;
- dbg("%s", __func__);
-
/* Force baud rate if this device requires it, unless it is set to
B0. */
if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
@@ -2295,8 +2267,6 @@
int len;
int ret;
- dbg("%s TIOCMGET", __func__);
-
buf = kmalloc(2, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -2346,7 +2316,7 @@
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s TIOCMSET", __func__);
+
return update_mctrl(port, set, clear);
}
@@ -2435,7 +2405,6 @@
{
int retval;
- dbg("%s", __func__);
if (vendor > 0 && product > 0) {
/* Add user specified VID/PID to reserved element of table. */
int i;
@@ -2454,8 +2423,6 @@
static void __exit ftdi_exit(void)
{
- dbg("%s", __func__);
-
usb_serial_deregister_drivers(&ftdi_driver, serial_drivers);
}
