[media] em28xx: enable support for the drx-d on the HVR-900 R2
Add the required board initialization required for the drx-d to work with
the 900R2.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 69fcea8..5bdecb3 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -859,6 +859,8 @@
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900_digital,
.ir_codes = RC_MAP_HAUPPAUGE,
.decoder = EM28XX_TVP5150,
.input = { {
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index c7c04bf..bdbdb1b 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -38,6 +38,7 @@
#include "tda1002x.h"
#include "tda18271.h"
#include "s921.h"
+#include "drxd.h"
MODULE_DESCRIPTION("driver for em28xx based DVB cards");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -285,12 +286,12 @@
.if2 = 45600,
};
-#ifdef EM28XX_DRX397XD_SUPPORT
-/* [TODO] djh - not sure yet what the device config needs to contain */
-static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
- .demod_address = (0xe0 >> 1),
+static struct drxd_config em28xx_drxd = {
+ .index = 0, .demod_address = 0x70, .demod_revision = 0xa2,
+ .demoda_address = 0x00, .pll_address = 0x00,
+ .pll_type = DRXD_PLL_NONE, .clock = 12000, .insert_rs_byte = 1,
+ .pll_set = NULL, .osc_deviation = NULL, .IF = 42800000,
};
-#endif
static int mt352_terratec_xs_init(struct dvb_frontend *fe)
{
@@ -588,18 +589,13 @@
}
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
-#ifdef EM28XX_DRX397XD_SUPPORT
- /* We don't have the config structure properly populated, so
- this is commented out for now */
- dvb->frontend = dvb_attach(drx397xD_attach,
- &em28xx_drx397xD_with_xc3028,
- &dev->i2c_adap);
+ dvb->frontend = dvb_attach(drxd_attach, &em28xx_drxd, NULL,
+ &dev->i2c_adap, &dev->udev->dev);
if (attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
}
break;
-#endif
case EM2870_BOARD_REDDO_DVB_C_USB_BOX:
/* Philips CU1216L NIM (Philips TDA10023 + Infineon TUA6034) */
dvb->frontend = dvb_attach(tda10023_attach,
