Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] fix ia64 kprobes compilation
[IA64] move gcc_intrin.h from header-y to unifdef-y
[IA64] workaround tiger ia64_sal_get_physical_id_info hang
[IA64] move defconfig to arch/ia64/configs/
[IA64] Fix irq migration in multiple vector domain
[IA64] signal(ia64_ia32): add a signal stack overflow check
[IA64] signal(ia64): add a signal stack overflow check
[IA64] CONFIG_SGI_SN2 - auto select NUMA and ACPI_NUMA
diff --git a/.gitignore b/.gitignore
index 8363e48..fdcce40 100644
--- a/.gitignore
+++ b/.gitignore
@@ -53,3 +53,5 @@
*.orig
*.rej
+*~
+\#*#
diff --git a/Documentation/controllers/memory.txt b/Documentation/controllers/memory.txt
index 6015347..866b9cd 100644
--- a/Documentation/controllers/memory.txt
+++ b/Documentation/controllers/memory.txt
@@ -1,4 +1,8 @@
-Memory Controller
+Memory Resource Controller
+
+NOTE: The Memory Resource Controller has been generically been referred
+to as the memory controller in this document. Do not confuse memory controller
+used here with the memory controller that is used in hardware.
Salient features
@@ -152,7 +156,7 @@
a. Enable CONFIG_CGROUPS
b. Enable CONFIG_RESOURCE_COUNTERS
-c. Enable CONFIG_CGROUP_MEM_CONT
+c. Enable CONFIG_CGROUP_MEM_RES_CTLR
1. Prepare the cgroups
# mkdir -p /cgroups
@@ -164,7 +168,7 @@
Since now we're in the 0 cgroup,
We can alter the memory limit:
-# echo -n 4M > /cgroups/0/memory.limit_in_bytes
+# echo 4M > /cgroups/0/memory.limit_in_bytes
NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
mega or gigabytes.
@@ -185,7 +189,7 @@
availability of memory on the system. The user is required to re-read
this file after a write to guarantee the value committed by the kernel.
-# echo -n 1 > memory.limit_in_bytes
+# echo 1 > memory.limit_in_bytes
# cat memory.limit_in_bytes
4096
@@ -197,7 +201,7 @@
The memory.force_empty gives an interface to drop *all* charges by force.
-# echo -n 1 > memory.force_empty
+# echo 1 > memory.force_empty
will drop all charges in cgroup. Currently, this is maintained for test.
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 8da724e..5463009 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -2,6 +2,9 @@
This provides an overview of GPIO access conventions on Linux.
+These calls use the gpio_* naming prefix. No other calls should use that
+prefix, or the related __gpio_* prefix.
+
What is a GPIO?
===============
@@ -69,11 +72,13 @@
not care how it's implemented.)
That said, if the convention is supported on their platform, drivers should
-use it when possible. Platforms should declare GENERIC_GPIO support in
-Kconfig (boolean true), which multi-platform drivers can depend on when
-using the include file:
+use it when possible. Platforms must declare GENERIC_GPIO support in their
+Kconfig (boolean true), and provide an <asm/gpio.h> file. Drivers that can't
+work without standard GPIO calls should have Kconfig entries which depend
+on GENERIC_GPIO. The GPIO calls are available, either as "real code" or as
+optimized-away stubs, when drivers use the include file:
- #include <asm/gpio.h>
+ #include <linux/gpio.h>
If you stick to this convention then it'll be easier for other developers to
see what your code is doing, and help maintain it.
@@ -316,6 +321,9 @@
or support them in the same way; and any given board might use external
pullups (or pulldowns) so that the on-chip ones should not be used.
(When a circuit needs 5 kOhm, on-chip 100 kOhm resistors won't do.)
+Likewise drive strength (2 mA vs 20 mA) and voltage (1.8V vs 3.3V) is a
+platform-specific issue, as are models like (not) having a one-to-one
+correspondence between configurable pins and GPIOs.
There are other system-specific mechanisms that are not specified here,
like the aforementioned options for input de-glitching and wire-OR output.
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 83f515c2..be89f39 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -192,7 +192,8 @@
The Kprobes API includes a "register" function and an "unregister"
function for each type of probe. Here are terse, mini-man-page
specifications for these functions and the associated probe handlers
-that you'll write. See the latter half of this document for examples.
+that you'll write. See the files in the samples/kprobes/ sub-directory
+for examples.
4.1 register_kprobe
@@ -420,249 +421,15 @@
8. Kprobes Example
-Here's a sample kernel module showing the use of kprobes to dump a
-stack trace and selected i386 registers when do_fork() is called.
------ cut here -----
-/*kprobe_example.c*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/kprobes.h>
-#include <linux/sched.h>
-
-/*For each probe you need to allocate a kprobe structure*/
-static struct kprobe kp;
-
-/*kprobe pre_handler: called just before the probed instruction is executed*/
-int handler_pre(struct kprobe *p, struct pt_regs *regs)
-{
- printk("pre_handler: p->addr=0x%p, eip=%lx, eflags=0x%lx\n",
- p->addr, regs->eip, regs->eflags);
- dump_stack();
- return 0;
-}
-
-/*kprobe post_handler: called after the probed instruction is executed*/
-void handler_post(struct kprobe *p, struct pt_regs *regs, unsigned long flags)
-{
- printk("post_handler: p->addr=0x%p, eflags=0x%lx\n",
- p->addr, regs->eflags);
-}
-
-/* fault_handler: this is called if an exception is generated for any
- * instruction within the pre- or post-handler, or when Kprobes
- * single-steps the probed instruction.
- */
-int handler_fault(struct kprobe *p, struct pt_regs *regs, int trapnr)
-{
- printk("fault_handler: p->addr=0x%p, trap #%dn",
- p->addr, trapnr);
- /* Return 0 because we don't handle the fault. */
- return 0;
-}
-
-static int __init kprobe_init(void)
-{
- int ret;
- kp.pre_handler = handler_pre;
- kp.post_handler = handler_post;
- kp.fault_handler = handler_fault;
- kp.symbol_name = "do_fork";
-
- ret = register_kprobe(&kp);
- if (ret < 0) {
- printk("register_kprobe failed, returned %d\n", ret);
- return ret;
- }
- printk("kprobe registered\n");
- return 0;
-}
-
-static void __exit kprobe_exit(void)
-{
- unregister_kprobe(&kp);
- printk("kprobe unregistered\n");
-}
-
-module_init(kprobe_init)
-module_exit(kprobe_exit)
-MODULE_LICENSE("GPL");
------ cut here -----
-
-You can build the kernel module, kprobe-example.ko, using the following
-Makefile:
------ cut here -----
-obj-m := kprobe-example.o
-KDIR := /lib/modules/$(shell uname -r)/build
-PWD := $(shell pwd)
-default:
- $(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
-clean:
- rm -f *.mod.c *.ko *.o
------ cut here -----
-
-$ make
-$ su -
-...
-# insmod kprobe-example.ko
-
-You will see the trace data in /var/log/messages and on the console
-whenever do_fork() is invoked to create a new process.
+See samples/kprobes/kprobe_example.c
9. Jprobes Example
-Here's a sample kernel module showing the use of jprobes to dump
-the arguments of do_fork().
------ cut here -----
-/*jprobe-example.c */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/uio.h>
-#include <linux/kprobes.h>
-
-/*
- * Jumper probe for do_fork.
- * Mirror principle enables access to arguments of the probed routine
- * from the probe handler.
- */
-
-/* Proxy routine having the same arguments as actual do_fork() routine */
-long jdo_fork(unsigned long clone_flags, unsigned long stack_start,
- struct pt_regs *regs, unsigned long stack_size,
- int __user * parent_tidptr, int __user * child_tidptr)
-{
- printk("jprobe: clone_flags=0x%lx, stack_size=0x%lx, regs=0x%p\n",
- clone_flags, stack_size, regs);
- /* Always end with a call to jprobe_return(). */
- jprobe_return();
- /*NOTREACHED*/
- return 0;
-}
-
-static struct jprobe my_jprobe = {
- .entry = jdo_fork
-};
-
-static int __init jprobe_init(void)
-{
- int ret;
- my_jprobe.kp.symbol_name = "do_fork";
-
- if ((ret = register_jprobe(&my_jprobe)) <0) {
- printk("register_jprobe failed, returned %d\n", ret);
- return -1;
- }
- printk("Planted jprobe at %p, handler addr %p\n",
- my_jprobe.kp.addr, my_jprobe.entry);
- return 0;
-}
-
-static void __exit jprobe_exit(void)
-{
- unregister_jprobe(&my_jprobe);
- printk("jprobe unregistered\n");
-}
-
-module_init(jprobe_init)
-module_exit(jprobe_exit)
-MODULE_LICENSE("GPL");
------ cut here -----
-
-Build and insert the kernel module as shown in the above kprobe
-example. You will see the trace data in /var/log/messages and on
-the console whenever do_fork() is invoked to create a new process.
-(Some messages may be suppressed if syslogd is configured to
-eliminate duplicate messages.)
+See samples/kprobes/jprobe_example.c
10. Kretprobes Example
-Here's a sample kernel module showing the use of return probes to
-report failed calls to sys_open().
------ cut here -----
-/*kretprobe-example.c*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/kprobes.h>
-#include <linux/ktime.h>
-
-/* per-instance private data */
-struct my_data {
- ktime_t entry_stamp;
-};
-
-static const char *probed_func = "sys_open";
-
-/* Timestamp function entry. */
-static int entry_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
-{
- struct my_data *data;
-
- if(!current->mm)
- return 1; /* skip kernel threads */
-
- data = (struct my_data *)ri->data;
- data->entry_stamp = ktime_get();
- return 0;
-}
-
-/* If the probed function failed, log the return value and duration.
- * Duration may turn out to be zero consistently, depending upon the
- * granularity of time accounting on the platform. */
-static int return_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
-{
- int retval = regs_return_value(regs);
- struct my_data *data = (struct my_data *)ri->data;
- s64 delta;
- ktime_t now;
-
- if (retval < 0) {
- now = ktime_get();
- delta = ktime_to_ns(ktime_sub(now, data->entry_stamp));
- printk("%s: return val = %d (duration = %lld ns)\n",
- probed_func, retval, delta);
- }
- return 0;
-}
-
-static struct kretprobe my_kretprobe = {
- .handler = return_handler,
- .entry_handler = entry_handler,
- .data_size = sizeof(struct my_data),
- .maxactive = 20, /* probe up to 20 instances concurrently */
-};
-
-static int __init kretprobe_init(void)
-{
- int ret;
- my_kretprobe.kp.symbol_name = (char *)probed_func;
-
- if ((ret = register_kretprobe(&my_kretprobe)) < 0) {
- printk("register_kretprobe failed, returned %d\n", ret);
- return -1;
- }
- printk("Kretprobe active on %s\n", my_kretprobe.kp.symbol_name);
- return 0;
-}
-
-static void __exit kretprobe_exit(void)
-{
- unregister_kretprobe(&my_kretprobe);
- printk("kretprobe unregistered\n");
- /* nmissed > 0 suggests that maxactive was set too low. */
- printk("Missed probing %d instances of %s\n",
- my_kretprobe.nmissed, probed_func);
-}
-
-module_init(kretprobe_init)
-module_exit(kretprobe_exit)
-MODULE_LICENSE("GPL");
------ cut here -----
-
-Build and insert the kernel module as shown in the above kprobe
-example. You will see the trace data in /var/log/messages and on the
-console whenever sys_open() returns a negative value. (Some messages
-may be suppressed if syslogd is configured to eliminate duplicate
-messages.)
+See samples/kprobes/kretprobe_example.c
For additional information on Kprobes, refer to the following URLs:
http://www-106.ibm.com/developerworks/library/l-kprobes.html?ca=dgr-lnxw42Kprobe
diff --git a/Documentation/pci.txt b/Documentation/pci.txt
index 72b20c6..bb7bd27 100644
--- a/Documentation/pci.txt
+++ b/Documentation/pci.txt
@@ -123,7 +123,8 @@
The ID table is an array of struct pci_device_id entries ending with an
-all-zero entry. Each entry consists of:
+all-zero entry; use of the macro DECLARE_PCI_DEVICE_TABLE is the preferred
+method of declaring the table. Each entry consists of:
vendor,device Vendor and device ID to match (or PCI_ANY_ID)
@@ -191,7 +192,8 @@
o Do not mark the struct pci_driver.
- o The ID table array should be marked __devinitdata.
+ o The ID table array should be marked __devinitconst; this is done
+ automatically if the table is declared with DECLARE_PCI_DEVICE_TABLE().
o The probe() and remove() functions should be marked __devinit
and __devexit respectively. All initialization functions
diff --git a/MAINTAINERS b/MAINTAINERS
index a0f78e7..558636e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1138,6 +1138,12 @@
W: http://accessrunner.sourceforge.net/
S: Maintained
+CONTROL GROUPS (CGROUPS)
+P: Paul Menage
+M: menage@google.com
+L: containers@lists.linux-foundation.org
+S: Maintained
+
CORETEMP HARDWARE MONITORING DRIVER
P: Rudolf Marek
M: r.marek@assembler.cz
@@ -2633,6 +2639,17 @@
W: http://www.linux-mm.org
S: Maintained
+MEMORY RESOURCE CONTROLLER
+P: Balbir Singh
+M: balbir@linux.vnet.ibm.com
+P: Pavel Emelyanov
+M: xemul@openvz.org
+P: KAMEZAWA Hiroyuki
+M: kamezawa.hiroyu@jp.fujitsu.com
+L: linux-mm@kvack.org
+L: linux-kernel@vger.kernel.org
+S: Maintained
+
MEI MN10300/AM33 PORT
P: David Howells
M: dhowells@redhat.com
diff --git a/arch/Kconfig b/arch/Kconfig
index 3d72dc3f..694c9af 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -27,5 +27,12 @@
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
+config KRETPROBES
+ def_bool y
+ depends on KPROBES && HAVE_KRETPROBES
+
config HAVE_KPROBES
def_bool n
+
+config HAVE_KRETPROBES
+ def_bool n
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 26d3789..be6fa10 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -31,7 +31,6 @@
#endif
#define DEBUG_NODIRECT 0
-#define DEBUG_FORCEDAC 0
#define ISA_DMA_MASK 0x00ffffff
@@ -126,39 +125,67 @@
return iommu_arena_new_node(0, hose, base, window_size, align);
}
+static inline int is_span_boundary(unsigned int index, unsigned int nr,
+ unsigned long shift,
+ unsigned long boundary_size)
+{
+ shift = (shift + index) & (boundary_size - 1);
+ return shift + nr > boundary_size;
+}
+
/* Must be called with the arena lock held */
static long
-iommu_arena_find_pages(struct pci_iommu_arena *arena, long n, long mask)
+iommu_arena_find_pages(struct device *dev, struct pci_iommu_arena *arena,
+ long n, long mask)
{
unsigned long *ptes;
long i, p, nent;
+ int pass = 0;
+ unsigned long base;
+ unsigned long boundary_size;
+
+ BUG_ON(arena->dma_base & ~PAGE_MASK);
+ base = arena->dma_base >> PAGE_SHIFT;
+ if (dev)
+ boundary_size = ALIGN(dma_get_max_seg_size(dev) + 1, PAGE_SIZE)
+ >> PAGE_SHIFT;
+ else
+ boundary_size = ALIGN(1UL << 32, PAGE_SIZE) >> PAGE_SHIFT;
+
+ BUG_ON(!is_power_of_2(boundary_size));
/* Search forward for the first mask-aligned sequence of N free ptes */
ptes = arena->ptes;
nent = arena->size >> PAGE_SHIFT;
- p = (arena->next_entry + mask) & ~mask;
+ p = ALIGN(arena->next_entry, mask + 1);
i = 0;
+
+again:
while (i < n && p+i < nent) {
+ if (!i && is_span_boundary(p, n, base, boundary_size)) {
+ p = ALIGN(p + 1, mask + 1);
+ goto again;
+ }
+
if (ptes[p+i])
- p = (p + i + 1 + mask) & ~mask, i = 0;
+ p = ALIGN(p + i + 1, mask + 1), i = 0;
else
i = i + 1;
}
if (i < n) {
- /* Reached the end. Flush the TLB and restart the
- search from the beginning. */
- alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
+ if (pass < 1) {
+ /*
+ * Reached the end. Flush the TLB and restart
+ * the search from the beginning.
+ */
+ alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
- p = 0, i = 0;
- while (i < n && p+i < nent) {
- if (ptes[p+i])
- p = (p + i + 1 + mask) & ~mask, i = 0;
- else
- i = i + 1;
- }
-
- if (i < n)
+ pass++;
+ p = 0;
+ i = 0;
+ goto again;
+ } else
return -1;
}
@@ -168,7 +195,8 @@
}
static long
-iommu_arena_alloc(struct pci_iommu_arena *arena, long n, unsigned int align)
+iommu_arena_alloc(struct device *dev, struct pci_iommu_arena *arena, long n,
+ unsigned int align)
{
unsigned long flags;
unsigned long *ptes;
@@ -179,7 +207,7 @@
/* Search for N empty ptes */
ptes = arena->ptes;
mask = max(align, arena->align_entry) - 1;
- p = iommu_arena_find_pages(arena, n, mask);
+ p = iommu_arena_find_pages(dev, arena, n, mask);
if (p < 0) {
spin_unlock_irqrestore(&arena->lock, flags);
return -1;
@@ -229,6 +257,7 @@
unsigned long paddr;
dma_addr_t ret;
unsigned int align = 0;
+ struct device *dev = pdev ? &pdev->dev : NULL;
paddr = __pa(cpu_addr);
@@ -276,7 +305,7 @@
/* Force allocation to 64KB boundary for ISA bridges. */
if (pdev && pdev == isa_bridge)
align = 8;
- dma_ofs = iommu_arena_alloc(arena, npages, align);
+ dma_ofs = iommu_arena_alloc(dev, arena, npages, align);
if (dma_ofs < 0) {
printk(KERN_WARNING "pci_map_single failed: "
"could not allocate dma page tables\n");
@@ -563,7 +592,7 @@
paddr &= ~PAGE_MASK;
npages = calc_npages(paddr + size);
- dma_ofs = iommu_arena_alloc(arena, npages, 0);
+ dma_ofs = iommu_arena_alloc(dev, arena, npages, 0);
if (dma_ofs < 0) {
/* If we attempted a direct map above but failed, die. */
if (leader->dma_address == 0)
@@ -830,7 +859,7 @@
/* Search for N empty ptes. */
ptes = arena->ptes;
- p = iommu_arena_find_pages(arena, pg_count, align_mask);
+ p = iommu_arena_find_pages(NULL, arena, pg_count, align_mask);
if (p < 0) {
spin_unlock_irqrestore(&arena->lock, flags);
return -1;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 16b82e1..955fc53 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,6 +12,7 @@
select SYS_SUPPORTS_APM_EMULATION
select HAVE_OPROFILE
select HAVE_KPROBES if (!XIP_KERNEL)
+ select HAVE_KRETPROBES if (HAVE_KPROBES)
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index 9310a7b4..525483f 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -13,7 +13,7 @@
#include <linux/swap.h>
#include <linux/sched.h>
#include <linux/init.h>
-#include <linux/vmstat.h>
+#include <linux/mm.h>
#include <asm/arch/svinto.h>
#include <asm/types.h>
#include <asm/signal.h>
diff --git a/arch/cris/arch-v10/lib/string.c b/arch/cris/arch-v10/lib/string.c
index 7161a2b..c7bd6eb 100644
--- a/arch/cris/arch-v10/lib/string.c
+++ b/arch/cris/arch-v10/lib/string.c
@@ -1,55 +1,59 @@
-/*#************************************************************************#*/
-/*#-------------------------------------------------------------------------*/
-/*# */
-/*# FUNCTION NAME: memcpy() */
-/*# */
-/*# PARAMETERS: void* dst; Destination address. */
-/*# void* src; Source address. */
-/*# int len; Number of bytes to copy. */
-/*# */
-/*# RETURNS: dst. */
-/*# */
-/*# DESCRIPTION: Copies len bytes of memory from src to dst. No guarantees */
-/*# about copying of overlapping memory areas. This routine is */
-/*# very sensitive to compiler changes in register allocation. */
-/*# Should really be rewritten to avoid this problem. */
-/*# */
-/*#-------------------------------------------------------------------------*/
-/*# */
-/*# HISTORY */
-/*# */
-/*# DATE NAME CHANGES */
-/*# ---- ---- ------- */
-/*# 941007 Kenny R Creation */
-/*# 941011 Kenny R Lots of optimizations and inlining. */
-/*# 941129 Ulf A Adapted for use in libc. */
-/*# 950216 HP N==0 forgotten if non-aligned src/dst. */
-/*# Added some optimizations. */
-/*# 001025 HP Make src and dst char *. Align dst to */
-/*# dword, not just word-if-both-src-and-dst- */
-/*# are-misaligned. */
-/*# */
-/*#-------------------------------------------------------------------------*/
+/* A memcpy for CRIS.
+ Copyright (C) 1994-2005 Axis Communications.
+ All rights reserved.
-#include <linux/types.h>
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
-void *memcpy(void *pdst,
- const void *psrc,
- size_t pn)
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ 2. Neither the name of Axis Communications nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS
+ COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE. */
+
+/* FIXME: This file should really only be used for reference, as the
+ result is somewhat depending on gcc generating what we expect rather
+ than what we describe. An assembly file should be used instead. */
+
+#include <stddef.h>
+
+/* Break even between movem and move16 is really at 38.7 * 2, but
+ modulo 44, so up to the next multiple of 44, we use ordinary code. */
+#define MEMCPY_BY_BLOCK_THRESHOLD (44 * 2)
+
+/* No name ambiguities in this file. */
+__asm__ (".syntax no_register_prefix");
+
+void *
+memcpy(void *pdst, const void *psrc, size_t pn)
{
- /* Ok. Now we want the parameters put in special registers.
+ /* Now we want the parameters put in special registers.
Make sure the compiler is able to make something useful of this.
- As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+ As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
- If gcc was alright, it really would need no temporaries, and no
- stack space to save stuff on. */
+ If gcc was allright, it really would need no temporaries, and no
+ stack space to save stuff on. */
register void *return_dst __asm__ ("r10") = pdst;
- register char *dst __asm__ ("r13") = pdst;
- register const char *src __asm__ ("r11") = psrc;
+ register unsigned char *dst __asm__ ("r13") = pdst;
+ register unsigned const char *src __asm__ ("r11") = psrc;
register int n __asm__ ("r12") = pn;
-
-
+
/* When src is aligned but not dst, this makes a few extra needless
cycles. I believe it would take as many to check that the
re-alignment was unnecessary. */
@@ -59,167 +63,174 @@
&& n >= 3)
{
if ((unsigned long) dst & 1)
- {
- n--;
- *(char*)dst = *(char*)src;
- src++;
- dst++;
- }
+ {
+ n--;
+ *dst = *src;
+ src++;
+ dst++;
+ }
if ((unsigned long) dst & 2)
+ {
+ n -= 2;
+ *(short *) dst = *(short *) src;
+ src += 2;
+ dst += 2;
+ }
+ }
+
+ /* Decide which copying method to use. */
+ if (n >= MEMCPY_BY_BLOCK_THRESHOLD)
{
- n -= 2;
- *(short*)dst = *(short*)src;
- src += 2;
- dst += 2;
- }
- }
-
- /* Decide which copying method to use. */
- if (n >= 44*2) /* Break even between movem and
- move16 is at 38.7*2, but modulo 44. */
- {
- /* For large copies we use 'movem' */
-
- /* It is not optimal to tell the compiler about clobbering any
- registers; that will move the saving/restoring of those registers
- to the function prologue/epilogue, and make non-movem sizes
- suboptimal.
-
- This method is not foolproof; it assumes that the "asm reg"
- declarations at the beginning of the function really are used
- here (beware: they may be moved to temporary registers).
- This way, we do not have to save/move the registers around into
- temporaries; we can safely use them straight away.
-
- If you want to check that the allocation was right; then
- check the equalities in the first comment. It should say
- "r13=r13, r11=r11, r12=r12" */
- __asm__ volatile ("\n\
- ;; Check that the following is true (same register names on \n\
- ;; both sides of equal sign, as in r8=r8): \n\
- ;; %0=r13, %1=r11, %2=r12 \n\
- ;; \n\
- ;; Save the registers we'll use in the movem process \n\
- ;; on the stack. \n\
- subq 11*4,$sp \n\
- movem $r10,[$sp] \n\
+ /* It is not optimal to tell the compiler about clobbering any
+ registers; that will move the saving/restoring of those registers
+ to the function prologue/epilogue, and make non-movem sizes
+ suboptimal. */
+ __asm__ volatile
+ ("\
+ ;; GCC does promise correct register allocations, but let's \n\
+ ;; make sure it keeps its promises. \n\
+ .ifnc %0-%1-%2,$r13-$r11-$r12 \n\
+ .error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\" \n\
+ .endif \n\
\n\
- ;; Now we've got this: \n\
- ;; r11 - src \n\
- ;; r13 - dst \n\
- ;; r12 - n \n\
+ ;; Save the registers we'll use in the movem process \n\
+ ;; on the stack. \n\
+ subq 11*4,sp \n\
+ movem r10,[sp] \n\
\n\
- ;; Update n for the first loop \n\
- subq 44,$r12 \n\
+ ;; Now we've got this: \n\
+ ;; r11 - src \n\
+ ;; r13 - dst \n\
+ ;; r12 - n \n\
+ \n\
+ ;; Update n for the first loop. \n\
+ subq 44,r12 \n\
0: \n\
- movem [$r11+],$r10 \n\
- subq 44,$r12 \n\
- bge 0b \n\
- movem $r10,[$r13+] \n\
+"
+#ifdef __arch_common_v10_v32
+ /* Cater to branch offset difference between v32 and v10. We
+ assume the branch below has an 8-bit offset. */
+" setf\n"
+#endif
+" movem [r11+],r10 \n\
+ subq 44,r12 \n\
+ bge 0b \n\
+ movem r10,[r13+] \n\
\n\
- addq 44,$r12 ;; compensate for last loop underflowing n \n\
+ ;; Compensate for last loop underflowing n. \n\
+ addq 44,r12 \n\
\n\
- ;; Restore registers from stack \n\
- movem [$sp+],$r10"
+ ;; Restore registers from stack. \n\
+ movem [sp+],r10"
- /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n)
- /* Inputs */ : "0" (dst), "1" (src), "2" (n));
-
- }
+ /* Outputs. */
+ : "=r" (dst), "=r" (src), "=r" (n)
- /* Either we directly starts copying, using dword copying
- in a loop, or we copy as much as possible with 'movem'
- and then the last block (<44 bytes) is copied here.
- This will work since 'movem' will have updated src,dst,n. */
+ /* Inputs. */
+ : "0" (dst), "1" (src), "2" (n));
+ }
- while ( n >= 16 )
- {
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- n -= 16;
- }
+ while (n >= 16)
+ {
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
- /* A switch() is definitely the fastest although it takes a LOT of code.
- * Particularly if you inline code this.
- */
+ n -= 16;
+ }
+
switch (n)
- {
+ {
case 0:
break;
- case 1:
- *(char*)dst = *(char*)src;
- break;
- case 2:
- *(short*)dst = *(short*)src;
- break;
- case 3:
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
- break;
- case 4:
- *((long*)dst)++ = *((long*)src)++;
- break;
- case 5:
- *((long*)dst)++ = *((long*)src)++;
- *(char*)dst = *(char*)src;
- break;
- case 6:
- *((long*)dst)++ = *((long*)src)++;
- *(short*)dst = *(short*)src;
- break;
- case 7:
- *((long*)dst)++ = *((long*)src)++;
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
- break;
- case 8:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- break;
- case 9:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(char*)dst = *(char*)src;
- break;
- case 10:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(short*)dst = *(short*)src;
- break;
- case 11:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
- break;
- case 12:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- break;
- case 13:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(char*)dst = *(char*)src;
- break;
- case 14:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(short*)dst = *(short*)src;
- break;
- case 15:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
- break;
- }
- return return_dst; /* destination pointer. */
-} /* memcpy() */
+ case 1:
+ *dst = *src;
+ break;
+
+ case 2:
+ *(short *) dst = *(short *) src;
+ break;
+
+ case 3:
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
+ break;
+
+ case 4:
+ *(long *) dst = *(long *) src;
+ break;
+
+ case 5:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *dst = *src;
+ break;
+
+ case 6:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src;
+ break;
+
+ case 7:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
+ break;
+
+ case 8:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src;
+ break;
+
+ case 9:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *dst = *src;
+ break;
+
+ case 10:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src;
+ break;
+
+ case 11:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
+ break;
+
+ case 12:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src;
+ break;
+
+ case 13:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *dst = *src;
+ break;
+
+ case 14:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src;
+ break;
+
+ case 15:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
+ break;
+ }
+
+ return return_dst;
+}
diff --git a/arch/cris/arch-v10/lib/usercopy.c b/arch/cris/arch-v10/lib/usercopy.c
index b8e6c04..b0a608d 100644
--- a/arch/cris/arch-v10/lib/usercopy.c
+++ b/arch/cris/arch-v10/lib/usercopy.c
@@ -193,7 +193,7 @@
inaccessible. */
unsigned long
-__copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
+__copy_user_zeroing(void *pdst, const void __user *psrc, unsigned long pn)
{
/* We want the parameters put in special registers.
Make sure the compiler is able to make something useful of this.
diff --git a/arch/cris/arch-v32/lib/string.c b/arch/cris/arch-v32/lib/string.c
index 6740b2c..c7bd6eb 100644
--- a/arch/cris/arch-v32/lib/string.c
+++ b/arch/cris/arch-v32/lib/string.c
@@ -1,55 +1,59 @@
-/*#************************************************************************#*/
-/*#-------------------------------------------------------------------------*/
-/*# */
-/*# FUNCTION NAME: memcpy() */
-/*# */
-/*# PARAMETERS: void* dst; Destination address. */
-/*# void* src; Source address. */
-/*# int len; Number of bytes to copy. */
-/*# */
-/*# RETURNS: dst. */
-/*# */
-/*# DESCRIPTION: Copies len bytes of memory from src to dst. No guarantees */
-/*# about copying of overlapping memory areas. This routine is */
-/*# very sensitive to compiler changes in register allocation. */
-/*# Should really be rewritten to avoid this problem. */
-/*# */
-/*#-------------------------------------------------------------------------*/
-/*# */
-/*# HISTORY */
-/*# */
-/*# DATE NAME CHANGES */
-/*# ---- ---- ------- */
-/*# 941007 Kenny R Creation */
-/*# 941011 Kenny R Lots of optimizations and inlining. */
-/*# 941129 Ulf A Adapted for use in libc. */
-/*# 950216 HP N==0 forgotten if non-aligned src/dst. */
-/*# Added some optimizations. */
-/*# 001025 HP Make src and dst char *. Align dst to */
-/*# dword, not just word-if-both-src-and-dst- */
-/*# are-misaligned. */
-/*# */
-/*#-------------------------------------------------------------------------*/
+/* A memcpy for CRIS.
+ Copyright (C) 1994-2005 Axis Communications.
+ All rights reserved.
-#include <linux/types.h>
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
-void *memcpy(void *pdst,
- const void *psrc,
- size_t pn)
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ 2. Neither the name of Axis Communications nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS
+ COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE. */
+
+/* FIXME: This file should really only be used for reference, as the
+ result is somewhat depending on gcc generating what we expect rather
+ than what we describe. An assembly file should be used instead. */
+
+#include <stddef.h>
+
+/* Break even between movem and move16 is really at 38.7 * 2, but
+ modulo 44, so up to the next multiple of 44, we use ordinary code. */
+#define MEMCPY_BY_BLOCK_THRESHOLD (44 * 2)
+
+/* No name ambiguities in this file. */
+__asm__ (".syntax no_register_prefix");
+
+void *
+memcpy(void *pdst, const void *psrc, size_t pn)
{
- /* Ok. Now we want the parameters put in special registers.
+ /* Now we want the parameters put in special registers.
Make sure the compiler is able to make something useful of this.
- As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+ As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
- If gcc was alright, it really would need no temporaries, and no
- stack space to save stuff on. */
+ If gcc was allright, it really would need no temporaries, and no
+ stack space to save stuff on. */
register void *return_dst __asm__ ("r10") = pdst;
- register char *dst __asm__ ("r13") = pdst;
- register const char *src __asm__ ("r11") = psrc;
+ register unsigned char *dst __asm__ ("r13") = pdst;
+ register unsigned const char *src __asm__ ("r11") = psrc;
register int n __asm__ ("r12") = pn;
-
/* When src is aligned but not dst, this makes a few extra needless
cycles. I believe it would take as many to check that the
re-alignment was unnecessary. */
@@ -59,161 +63,174 @@
&& n >= 3)
{
if ((unsigned long) dst & 1)
- {
- n--;
- *(char*)dst = *(char*)src;
- src++;
- dst++;
- }
+ {
+ n--;
+ *dst = *src;
+ src++;
+ dst++;
+ }
if ((unsigned long) dst & 2)
+ {
+ n -= 2;
+ *(short *) dst = *(short *) src;
+ src += 2;
+ dst += 2;
+ }
+ }
+
+ /* Decide which copying method to use. */
+ if (n >= MEMCPY_BY_BLOCK_THRESHOLD)
{
- n -= 2;
- *(short*)dst = *(short*)src;
- src += 2;
- dst += 2;
- }
- }
-
- /* Decide which copying method to use. Movem is dirt cheap, so the
- overheap is low enough to always use the minimum block size as the
- threshold. */
- if (n >= 44)
- {
- /* For large copies we use 'movem' */
-
- /* It is not optimal to tell the compiler about clobbering any
- registers; that will move the saving/restoring of those registers
- to the function prologue/epilogue, and make non-movem sizes
- suboptimal. */
- __asm__ volatile (" \n\
- ;; Check that the register asm declaration got right. \n\
- ;; The GCC manual explicitly says TRT will happen. \n\
- .ifnc %0-%1-%2,$r13-$r11-$r12 \n\
- .err \n\
- .endif \n\
+ /* It is not optimal to tell the compiler about clobbering any
+ registers; that will move the saving/restoring of those registers
+ to the function prologue/epilogue, and make non-movem sizes
+ suboptimal. */
+ __asm__ volatile
+ ("\
+ ;; GCC does promise correct register allocations, but let's \n\
+ ;; make sure it keeps its promises. \n\
+ .ifnc %0-%1-%2,$r13-$r11-$r12 \n\
+ .error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\" \n\
+ .endif \n\
\n\
- ;; Save the registers we'll use in the movem process \n\
+ ;; Save the registers we'll use in the movem process \n\
+ ;; on the stack. \n\
+ subq 11*4,sp \n\
+ movem r10,[sp] \n\
\n\
- ;; on the stack. \n\
- subq 11*4,$sp \n\
- movem $r10,[$sp] \n\
+ ;; Now we've got this: \n\
+ ;; r11 - src \n\
+ ;; r13 - dst \n\
+ ;; r12 - n \n\
\n\
- ;; Now we've got this: \n\
- ;; r11 - src \n\
- ;; r13 - dst \n\
- ;; r12 - n \n\
- \n\
- ;; Update n for the first loop \n\
- subq 44,$r12 \n\
+ ;; Update n for the first loop. \n\
+ subq 44,r12 \n\
0: \n\
- movem [$r11+],$r10 \n\
- subq 44,$r12 \n\
- bge 0b \n\
- movem $r10,[$r13+] \n\
+"
+#ifdef __arch_common_v10_v32
+ /* Cater to branch offset difference between v32 and v10. We
+ assume the branch below has an 8-bit offset. */
+" setf\n"
+#endif
+" movem [r11+],r10 \n\
+ subq 44,r12 \n\
+ bge 0b \n\
+ movem r10,[r13+] \n\
\n\
- addq 44,$r12 ;; compensate for last loop underflowing n \n\
+ ;; Compensate for last loop underflowing n. \n\
+ addq 44,r12 \n\
\n\
- ;; Restore registers from stack \n\
- movem [$sp+],$r10"
+ ;; Restore registers from stack. \n\
+ movem [sp+],r10"
- /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n)
- /* Inputs */ : "0" (dst), "1" (src), "2" (n));
+ /* Outputs. */
+ : "=r" (dst), "=r" (src), "=r" (n)
- }
+ /* Inputs. */
+ : "0" (dst), "1" (src), "2" (n));
+ }
- /* Either we directly starts copying, using dword copying
- in a loop, or we copy as much as possible with 'movem'
- and then the last block (<44 bytes) is copied here.
- This will work since 'movem' will have updated src,dst,n. */
+ while (n >= 16)
+ {
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
- while ( n >= 16 )
- {
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- n -= 16;
- }
+ n -= 16;
+ }
- /* A switch() is definitely the fastest although it takes a LOT of code.
- * Particularly if you inline code this.
- */
switch (n)
- {
+ {
case 0:
break;
- case 1:
- *(char*)dst = *(char*)src;
- break;
- case 2:
- *(short*)dst = *(short*)src;
- break;
- case 3:
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
- break;
- case 4:
- *((long*)dst)++ = *((long*)src)++;
- break;
- case 5:
- *((long*)dst)++ = *((long*)src)++;
- *(char*)dst = *(char*)src;
- break;
- case 6:
- *((long*)dst)++ = *((long*)src)++;
- *(short*)dst = *(short*)src;
- break;
- case 7:
- *((long*)dst)++ = *((long*)src)++;
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
- break;
- case 8:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- break;
- case 9:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(char*)dst = *(char*)src;
- break;
- case 10:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(short*)dst = *(short*)src;
- break;
- case 11:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
- break;
- case 12:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- break;
- case 13:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(char*)dst = *(char*)src;
- break;
- case 14:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(short*)dst = *(short*)src;
- break;
- case 15:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
- break;
- }
- return return_dst; /* destination pointer. */
-} /* memcpy() */
+ case 1:
+ *dst = *src;
+ break;
+
+ case 2:
+ *(short *) dst = *(short *) src;
+ break;
+
+ case 3:
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
+ break;
+
+ case 4:
+ *(long *) dst = *(long *) src;
+ break;
+
+ case 5:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *dst = *src;
+ break;
+
+ case 6:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src;
+ break;
+
+ case 7:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
+ break;
+
+ case 8:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src;
+ break;
+
+ case 9:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *dst = *src;
+ break;
+
+ case 10:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src;
+ break;
+
+ case 11:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
+ break;
+
+ case 12:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src;
+ break;
+
+ case 13:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *dst = *src;
+ break;
+
+ case 14:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src;
+ break;
+
+ case 15:
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
+ break;
+ }
+
+ return return_dst;
+}
diff --git a/arch/cris/arch-v32/lib/usercopy.c b/arch/cris/arch-v32/lib/usercopy.c
index 04d0cf3..0b5b70d 100644
--- a/arch/cris/arch-v32/lib/usercopy.c
+++ b/arch/cris/arch-v32/lib/usercopy.c
@@ -161,7 +161,7 @@
inaccessible. */
unsigned long
-__copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
+__copy_user_zeroing(void *pdst, const void __user *psrc, unsigned long pn)
{
/* We want the parameters put in special registers.
Make sure the compiler is able to make something useful of this.
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 17ef9b2..8fa3faf 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -18,6 +18,7 @@
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
default y
help
The Itanium Processor Family is Intel's 64-bit successor to
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5b8d838..1189d8d 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -90,6 +90,7 @@
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
config EARLY_PRINTK
bool
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index b21444b..9892827 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -61,6 +61,7 @@
def_bool y
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
source "init/Kconfig"
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 3af378d..463d1be 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -10,6 +10,7 @@
default y
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
config SPARC64
bool
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 53800b8..f41c953 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -21,6 +21,7 @@
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 9c0070b..7de543d 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -621,7 +621,8 @@
static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir)
{
/* see if we live in a "glue" directory */
- if (!dev->class || glue_dir->kset != &dev->class->class_dirs)
+ if (!glue_dir || !dev->class ||
+ glue_dir->kset != &dev->class->class_dirs)
return;
kobject_put(glue_dir);
@@ -770,17 +771,10 @@
struct class_interface *class_intf;
int error;
- error = pm_sleep_lock();
- if (error) {
- dev_warn(dev, "Suspicious %s during suspend\n", __FUNCTION__);
- dump_stack();
- return error;
- }
-
dev = get_device(dev);
if (!dev || !strlen(dev->bus_id)) {
error = -EINVAL;
- goto Error;
+ goto Done;
}
pr_debug("device: '%s': %s\n", dev->bus_id, __FUNCTION__);
@@ -843,11 +837,9 @@
}
Done:
put_device(dev);
- pm_sleep_unlock();
return error;
BusError:
device_pm_remove(dev);
- dpm_sysfs_remove(dev);
PMError:
if (dev->bus)
blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index ee9d1c8..d887d5c 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -48,7 +48,6 @@
*/
LIST_HEAD(dpm_active);
-static LIST_HEAD(dpm_locked);
static LIST_HEAD(dpm_off);
static LIST_HEAD(dpm_off_irq);
static LIST_HEAD(dpm_destroy);
@@ -81,28 +80,6 @@
*/
void device_pm_remove(struct device *dev)
{
- /*
- * If this function is called during a suspend, it will be blocked,
- * because we're holding the device's semaphore at that time, which may
- * lead to a deadlock. In that case we want to print a warning.
- * However, it may also be called by unregister_dropped_devices() with
- * the device's semaphore released, in which case the warning should
- * not be printed.
- */
- if (down_trylock(&dev->sem)) {
- if (down_read_trylock(&pm_sleep_rwsem)) {
- /* No suspend in progress, wait on dev->sem */
- down(&dev->sem);
- up_read(&pm_sleep_rwsem);
- } else {
- /* Suspend in progress, we may deadlock */
- dev_warn(dev, "Suspicious %s during suspend\n",
- __FUNCTION__);
- dump_stack();
- /* The user has been warned ... */
- down(&dev->sem);
- }
- }
pr_debug("PM: Removing info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
@@ -110,7 +87,6 @@
dpm_sysfs_remove(dev);
list_del_init(&dev->power.entry);
mutex_unlock(&dpm_list_mtx);
- up(&dev->sem);
}
/**
@@ -230,6 +206,8 @@
TRACE_DEVICE(dev);
TRACE_RESUME(0);
+ down(&dev->sem);
+
if (dev->bus && dev->bus->resume) {
dev_dbg(dev,"resuming\n");
error = dev->bus->resume(dev);
@@ -245,6 +223,8 @@
error = dev->class->resume(dev);
}
+ up(&dev->sem);
+
TRACE_RESUME(error);
return error;
}
@@ -266,7 +246,7 @@
struct list_head *entry = dpm_off.next;
struct device *dev = to_device(entry);
- list_move_tail(entry, &dpm_locked);
+ list_move_tail(entry, &dpm_active);
mutex_unlock(&dpm_list_mtx);
resume_device(dev);
mutex_lock(&dpm_list_mtx);
@@ -275,25 +255,6 @@
}
/**
- * unlock_all_devices - Release each device's semaphore
- *
- * Go through the dpm_off list. Put each device on the dpm_active
- * list and unlock it.
- */
-static void unlock_all_devices(void)
-{
- mutex_lock(&dpm_list_mtx);
- while (!list_empty(&dpm_locked)) {
- struct list_head *entry = dpm_locked.prev;
- struct device *dev = to_device(entry);
-
- list_move(entry, &dpm_active);
- up(&dev->sem);
- }
- mutex_unlock(&dpm_list_mtx);
-}
-
-/**
* unregister_dropped_devices - Unregister devices scheduled for removal
*
* Unregister all devices on the dpm_destroy list.
@@ -305,7 +266,6 @@
struct list_head *entry = dpm_destroy.next;
struct device *dev = to_device(entry);
- up(&dev->sem);
mutex_unlock(&dpm_list_mtx);
/* This also removes the device from the list */
device_unregister(dev);
@@ -324,7 +284,6 @@
{
might_sleep();
dpm_resume();
- unlock_all_devices();
unregister_dropped_devices();
up_write(&pm_sleep_rwsem);
}
@@ -388,18 +347,15 @@
struct list_head *entry = dpm_off.prev;
struct device *dev = to_device(entry);
- list_del_init(&dev->power.entry);
error = suspend_device_late(dev, state);
if (error) {
printk(KERN_ERR "Could not power down device %s: "
"error %d\n",
kobject_name(&dev->kobj), error);
- if (list_empty(&dev->power.entry))
- list_add(&dev->power.entry, &dpm_off);
break;
}
- if (list_empty(&dev->power.entry))
- list_add(&dev->power.entry, &dpm_off_irq);
+ if (!list_empty(&dev->power.entry))
+ list_move(&dev->power.entry, &dpm_off_irq);
}
if (!error)
@@ -419,6 +375,8 @@
{
int error = 0;
+ down(&dev->sem);
+
if (dev->power.power_state.event) {
dev_dbg(dev, "PM: suspend %d-->%d\n",
dev->power.power_state.event, state.event);
@@ -441,6 +399,9 @@
error = dev->bus->suspend(dev, state);
suspend_report_result(dev->bus->suspend, error);
}
+
+ up(&dev->sem);
+
return error;
}
@@ -461,13 +422,13 @@
int error = 0;
mutex_lock(&dpm_list_mtx);
- while (!list_empty(&dpm_locked)) {
- struct list_head *entry = dpm_locked.prev;
+ while (!list_empty(&dpm_active)) {
+ struct list_head *entry = dpm_active.prev;
struct device *dev = to_device(entry);
- list_del_init(&dev->power.entry);
mutex_unlock(&dpm_list_mtx);
error = suspend_device(dev, state);
+ mutex_lock(&dpm_list_mtx);
if (error) {
printk(KERN_ERR "Could not suspend device %s: "
"error %d%s\n",
@@ -476,14 +437,10 @@
(error == -EAGAIN ?
" (please convert to suspend_late)" :
""));
- mutex_lock(&dpm_list_mtx);
- if (list_empty(&dev->power.entry))
- list_add(&dev->power.entry, &dpm_locked);
break;
}
- mutex_lock(&dpm_list_mtx);
- if (list_empty(&dev->power.entry))
- list_add(&dev->power.entry, &dpm_off);
+ if (!list_empty(&dev->power.entry))
+ list_move(&dev->power.entry, &dpm_off);
}
mutex_unlock(&dpm_list_mtx);
@@ -491,36 +448,6 @@
}
/**
- * lock_all_devices - Acquire every device's semaphore
- *
- * Go through the dpm_active list. Carefully lock each device's
- * semaphore and put it in on the dpm_locked list.
- */
-static void lock_all_devices(void)
-{
- mutex_lock(&dpm_list_mtx);
- while (!list_empty(&dpm_active)) {
- struct list_head *entry = dpm_active.next;
- struct device *dev = to_device(entry);
-
- /* Required locking order is dev->sem first,
- * then dpm_list_mutex. Hence this awkward code.
- */
- get_device(dev);
- mutex_unlock(&dpm_list_mtx);
- down(&dev->sem);
- mutex_lock(&dpm_list_mtx);
-
- if (list_empty(entry))
- up(&dev->sem); /* Device was removed */
- else
- list_move_tail(entry, &dpm_locked);
- put_device(dev);
- }
- mutex_unlock(&dpm_list_mtx);
-}
-
-/**
* device_suspend - Save state and stop all devices in system.
* @state: new power management state
*
@@ -533,7 +460,6 @@
might_sleep();
down_write(&pm_sleep_rwsem);
- lock_all_devices();
error = dpm_suspend(state);
if (error)
device_resume();
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 674cd66..18feb1c 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -849,7 +849,8 @@
/*
* speed is given as the normal factor, e.g. 4 for 4x
*/
-static int pkt_set_speed(struct pktcdvd_device *pd, unsigned write_speed, unsigned read_speed)
+static noinline_for_stack int pkt_set_speed(struct pktcdvd_device *pd,
+ unsigned write_speed, unsigned read_speed)
{
struct packet_command cgc;
struct request_sense sense;
@@ -1776,7 +1777,8 @@
return pkt_generic_packet(pd, &cgc);
}
-static int pkt_get_last_written(struct pktcdvd_device *pd, long *last_written)
+static noinline_for_stack int pkt_get_last_written(struct pktcdvd_device *pd,
+ long *last_written)
{
disc_information di;
track_information ti;
@@ -1813,7 +1815,7 @@
/*
* write mode select package based on pd->settings
*/
-static int pkt_set_write_settings(struct pktcdvd_device *pd)
+static noinline_for_stack int pkt_set_write_settings(struct pktcdvd_device *pd)
{
struct packet_command cgc;
struct request_sense sense;
@@ -1972,7 +1974,7 @@
return 1;
}
-static int pkt_probe_settings(struct pktcdvd_device *pd)
+static noinline_for_stack int pkt_probe_settings(struct pktcdvd_device *pd)
{
struct packet_command cgc;
unsigned char buf[12];
@@ -2071,7 +2073,8 @@
/*
* enable/disable write caching on drive
*/
-static int pkt_write_caching(struct pktcdvd_device *pd, int set)
+static noinline_for_stack int pkt_write_caching(struct pktcdvd_device *pd,
+ int set)
{
struct packet_command cgc;
struct request_sense sense;
@@ -2116,7 +2119,8 @@
/*
* Returns drive maximum write speed
*/
-static int pkt_get_max_speed(struct pktcdvd_device *pd, unsigned *write_speed)
+static noinline_for_stack int pkt_get_max_speed(struct pktcdvd_device *pd,
+ unsigned *write_speed)
{
struct packet_command cgc;
struct request_sense sense;
@@ -2177,7 +2181,8 @@
/*
* reads the maximum media speed from ATIP
*/
-static int pkt_media_speed(struct pktcdvd_device *pd, unsigned *speed)
+static noinline_for_stack int pkt_media_speed(struct pktcdvd_device *pd,
+ unsigned *speed)
{
struct packet_command cgc;
struct request_sense sense;
@@ -2249,7 +2254,7 @@
}
}
-static int pkt_perform_opc(struct pktcdvd_device *pd)
+static noinline_for_stack int pkt_perform_opc(struct pktcdvd_device *pd)
{
struct packet_command cgc;
struct request_sense sense;
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 85d596a..eba2883 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -1527,7 +1527,7 @@
msleep(10);
portcount = inw(base + 0x2);
- if (!inw(base + 0xe) & 0x1 || (portcount != 0 && portcount != 4 &&
+ if (!(inw(base + 0xe) & 0x1) || (portcount != 0 && portcount != 4 &&
portcount != 8 && portcount != 16)) {
dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n",
card + 1);
diff --git a/drivers/char/pcmcia/ipwireless/network.c b/drivers/char/pcmcia/ipwireless/network.c
index ff35230..d793e68b 100644
--- a/drivers/char/pcmcia/ipwireless/network.c
+++ b/drivers/char/pcmcia/ipwireless/network.c
@@ -377,13 +377,16 @@
for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) {
struct ipw_tty *tty = network->associated_ttys[channel_idx][i];
+ if (!tty)
+ continue;
+
/*
* If it's associated with a tty (other than the RAS channel
* when we're online), then send the data to that tty. The RAS
* channel's data is handled above - it always goes through
* ppp_generic.
*/
- if (tty && channel_idx == IPW_CHANNEL_RAS
+ if (channel_idx == IPW_CHANNEL_RAS
&& (network->ras_control_lines &
IPW_CONTROL_LINE_DCD) != 0
&& ipwireless_tty_is_modem(tty)) {
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index c0e08c7..5ff83df 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -2109,7 +2109,6 @@
sx_out(bp, CD186x_CAR, port_No(port));
spin_unlock_irqrestore(&bp->lock, flags);
if (I_IXOFF(tty)) {
- spin_unlock_irqrestore(&bp->lock, flags);
sx_wait_CCR(bp);
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CCR, CCR_SSCH2);
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 367be91..9b58b89 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -702,6 +702,7 @@
if (is_switch) {
set_leds();
compute_shiftstate();
+ notify_update(vc);
}
}
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 8b10d9f..c5263d6 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -42,14 +42,14 @@
config INPUT_APANEL
tristate "Fujitsu Lifebook Application Panel buttons"
- depends on X86
- select I2C_I801
+ depends on X86 && I2C && LEDS_CLASS
select INPUT_POLLDEV
select CHECK_SIGNATURE
help
Say Y here for support of the Application Panel buttons, used on
Fujitsu Lifebook. These are attached to the mainboard through
- an SMBus interface managed by the I2C Intel ICH (i801) driver.
+ an SMBus interface managed by the I2C Intel ICH (i801) driver,
+ which you should also build for this kernel.
To compile this driver as a module, choose M here: the module will
be called apanel.
diff --git a/drivers/isdn/hisax/hisax_fcpcipnp.c b/drivers/isdn/hisax/hisax_fcpcipnp.c
index 7993e01..76043de 100644
--- a/drivers/isdn/hisax/hisax_fcpcipnp.c
+++ b/drivers/isdn/hisax/hisax_fcpcipnp.c
@@ -725,23 +725,6 @@
switch (adapter->type) {
case AVM_FRITZ_PCIV2:
- retval = request_irq(adapter->irq, fcpci2_irq, IRQF_SHARED,
- "fcpcipnp", adapter);
- break;
- case AVM_FRITZ_PCI:
- retval = request_irq(adapter->irq, fcpci_irq, IRQF_SHARED,
- "fcpcipnp", adapter);
- break;
- case AVM_FRITZ_PNP:
- retval = request_irq(adapter->irq, fcpci_irq, 0,
- "fcpcipnp", adapter);
- break;
- }
- if (retval)
- goto err_region;
-
- switch (adapter->type) {
- case AVM_FRITZ_PCIV2:
case AVM_FRITZ_PCI:
val = inl(adapter->io);
break;
@@ -796,6 +779,23 @@
switch (adapter->type) {
case AVM_FRITZ_PCIV2:
+ retval = request_irq(adapter->irq, fcpci2_irq, IRQF_SHARED,
+ "fcpcipnp", adapter);
+ break;
+ case AVM_FRITZ_PCI:
+ retval = request_irq(adapter->irq, fcpci_irq, IRQF_SHARED,
+ "fcpcipnp", adapter);
+ break;
+ case AVM_FRITZ_PNP:
+ retval = request_irq(adapter->irq, fcpci_irq, 0,
+ "fcpcipnp", adapter);
+ break;
+ }
+ if (retval)
+ goto err_region;
+
+ switch (adapter->type) {
+ case AVM_FRITZ_PCIV2:
fcpci2_init(adapter);
isacsx_setup(&adapter->isac);
break;
diff --git a/drivers/isdn/i4l/isdn_ttyfax.c b/drivers/isdn/i4l/isdn_ttyfax.c
index f93de4a..78f7660c 100644
--- a/drivers/isdn/i4l/isdn_ttyfax.c
+++ b/drivers/isdn/i4l/isdn_ttyfax.c
@@ -906,7 +906,8 @@
sprintf(rs, "\r\n0-2");
isdn_tty_at_cout(rs, info);
} else {
- if ((f->phase != ISDN_FAX_PHASE_D) || (!info->faxonline & 1))
+ if ((f->phase != ISDN_FAX_PHASE_D) ||
+ (!(info->faxonline & 1)))
PARSE_ERROR1;
par = isdn_getnum(p);
if ((par < 0) || (par > 2))
diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c
index 655ef9a..a335c85 100644
--- a/drivers/isdn/isdnloop/isdnloop.c
+++ b/drivers/isdn/isdnloop/isdnloop.c
@@ -1289,7 +1289,7 @@
}
break;
case ISDN_CMD_CLREAZ:
- if (!card->flags & ISDNLOOP_FLAGS_RUNNING)
+ if (!(card->flags & ISDNLOOP_FLAGS_RUNNING))
return -ENODEV;
if (card->leased)
break;
@@ -1333,7 +1333,7 @@
}
break;
case ISDN_CMD_SETL3:
- if (!card->flags & ISDNLOOP_FLAGS_RUNNING)
+ if (!(card->flags & ISDNLOOP_FLAGS_RUNNING))
return -ENODEV;
return 0;
default:
@@ -1380,7 +1380,7 @@
isdnloop_card *card = isdnloop_findcard(id);
if (card) {
- if (!card->flags & ISDNLOOP_FLAGS_RUNNING)
+ if (!(card->flags & ISDNLOOP_FLAGS_RUNNING))
return -ENODEV;
return (isdnloop_writecmd(buf, len, 1, card));
}
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 7aeceed..831aed9 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1047,6 +1047,11 @@
if (time_before(jiffies, bitmap->daemon_lastrun + bitmap->daemon_sleep*HZ))
return;
bitmap->daemon_lastrun = jiffies;
+ if (bitmap->allclean) {
+ bitmap->mddev->thread->timeout = MAX_SCHEDULE_TIMEOUT;
+ return;
+ }
+ bitmap->allclean = 1;
for (j = 0; j < bitmap->chunks; j++) {
bitmap_counter_t *bmc;
@@ -1068,8 +1073,10 @@
clear_page_attr(bitmap, page, BITMAP_PAGE_NEEDWRITE);
spin_unlock_irqrestore(&bitmap->lock, flags);
- if (need_write)
+ if (need_write) {
write_page(bitmap, page, 0);
+ bitmap->allclean = 0;
+ }
continue;
}
@@ -1098,6 +1105,9 @@
/*
if (j < 100) printk("bitmap: j=%lu, *bmc = 0x%x\n", j, *bmc);
*/
+ if (*bmc)
+ bitmap->allclean = 0;
+
if (*bmc == 2) {
*bmc=1; /* maybe clear the bit next time */
set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
@@ -1132,6 +1142,8 @@
}
}
+ if (bitmap->allclean == 0)
+ bitmap->mddev->thread->timeout = bitmap->daemon_sleep * HZ;
}
static bitmap_counter_t *bitmap_get_counter(struct bitmap *bitmap,
@@ -1226,6 +1238,7 @@
sectors -= blocks;
else sectors = 0;
}
+ bitmap->allclean = 0;
return 0;
}
@@ -1296,6 +1309,7 @@
}
}
spin_unlock_irq(&bitmap->lock);
+ bitmap->allclean = 0;
return rv;
}
@@ -1332,6 +1346,7 @@
}
unlock:
spin_unlock_irqrestore(&bitmap->lock, flags);
+ bitmap->allclean = 0;
}
void bitmap_close_sync(struct bitmap *bitmap)
@@ -1399,7 +1414,7 @@
set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
}
spin_unlock_irq(&bitmap->lock);
-
+ bitmap->allclean = 0;
}
/* dirty the memory and file bits for bitmap chunks "s" to "e" */
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 7da6ec2..827824a 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1105,7 +1105,11 @@
rdev->sb_size = le32_to_cpu(sb->max_dev) * 2 + 256;
bmask = queue_hardsect_size(rdev->bdev->bd_disk->queue)-1;
if (rdev->sb_size & bmask)
- rdev-> sb_size = (rdev->sb_size | bmask)+1;
+ rdev->sb_size = (rdev->sb_size | bmask) + 1;
+
+ if (minor_version
+ && rdev->data_offset < sb_offset + (rdev->sb_size/512))
+ return -EINVAL;
if (sb->level == cpu_to_le32(LEVEL_MULTIPATH))
rdev->desc_nr = -1;
@@ -1137,7 +1141,7 @@
else
ret = 0;
}
- if (minor_version)
+ if (minor_version)
rdev->size = ((rdev->bdev->bd_inode->i_size>>9) - le64_to_cpu(sb->data_offset)) / 2;
else
rdev->size = rdev->sb_offset;
@@ -1499,7 +1503,8 @@
free_disk_sb(rdev);
list_del_init(&rdev->same_set);
#ifndef MODULE
- md_autodetect_dev(rdev->bdev->bd_dev);
+ if (test_bit(AutoDetected, &rdev->flags))
+ md_autodetect_dev(rdev->bdev->bd_dev);
#endif
unlock_rdev(rdev);
kobject_put(&rdev->kobj);
@@ -1996,9 +2001,11 @@
char *e;
unsigned long long size = simple_strtoull(buf, &e, 10);
unsigned long long oldsize = rdev->size;
+ mddev_t *my_mddev = rdev->mddev;
+
if (e==buf || (*e && *e != '\n'))
return -EINVAL;
- if (rdev->mddev->pers)
+ if (my_mddev->pers)
return -EBUSY;
rdev->size = size;
if (size > oldsize && rdev->mddev->external) {
@@ -2011,7 +2018,7 @@
int overlap = 0;
struct list_head *tmp, *tmp2;
- mddev_unlock(rdev->mddev);
+ mddev_unlock(my_mddev);
for_each_mddev(mddev, tmp) {
mdk_rdev_t *rdev2;
@@ -2031,7 +2038,7 @@
break;
}
}
- mddev_lock(rdev->mddev);
+ mddev_lock(my_mddev);
if (overlap) {
/* Someone else could have slipped in a size
* change here, but doing so is just silly.
@@ -2043,8 +2050,8 @@
return -EBUSY;
}
}
- if (size < rdev->mddev->size || rdev->mddev->size == 0)
- rdev->mddev->size = size;
+ if (size < my_mddev->size || my_mddev->size == 0)
+ my_mddev->size = size;
return len;
}
@@ -2065,10 +2072,21 @@
{
struct rdev_sysfs_entry *entry = container_of(attr, struct rdev_sysfs_entry, attr);
mdk_rdev_t *rdev = container_of(kobj, mdk_rdev_t, kobj);
+ mddev_t *mddev = rdev->mddev;
+ ssize_t rv;
if (!entry->show)
return -EIO;
- return entry->show(rdev, page);
+
+ rv = mddev ? mddev_lock(mddev) : -EBUSY;
+ if (!rv) {
+ if (rdev->mddev == NULL)
+ rv = -EBUSY;
+ else
+ rv = entry->show(rdev, page);
+ mddev_unlock(mddev);
+ }
+ return rv;
}
static ssize_t
@@ -2077,15 +2095,19 @@
{
struct rdev_sysfs_entry *entry = container_of(attr, struct rdev_sysfs_entry, attr);
mdk_rdev_t *rdev = container_of(kobj, mdk_rdev_t, kobj);
- int rv;
+ ssize_t rv;
+ mddev_t *mddev = rdev->mddev;
if (!entry->store)
return -EIO;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- rv = mddev_lock(rdev->mddev);
+ rv = mddev ? mddev_lock(mddev): -EBUSY;
if (!rv) {
- rv = entry->store(rdev, page, length);
+ if (rdev->mddev == NULL)
+ rv = -EBUSY;
+ else
+ rv = entry->store(rdev, page, length);
mddev_unlock(rdev->mddev);
}
return rv;
@@ -5351,6 +5373,7 @@
mddev->ro = 0;
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(mddev->sync_thread);
}
atomic_inc(&mddev->writes_pending);
if (mddev->in_sync) {
@@ -6021,6 +6044,7 @@
MD_BUG();
continue;
}
+ set_bit(AutoDetected, &rdev->flags);
list_add(&rdev->same_set, &pending_raid_disks);
i_passed++;
}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 5c7fef0..ff61b30 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -592,6 +592,37 @@
}
+static int flush_pending_writes(conf_t *conf)
+{
+ /* Any writes that have been queued but are awaiting
+ * bitmap updates get flushed here.
+ * We return 1 if any requests were actually submitted.
+ */
+ int rv = 0;
+
+ spin_lock_irq(&conf->device_lock);
+
+ if (conf->pending_bio_list.head) {
+ struct bio *bio;
+ bio = bio_list_get(&conf->pending_bio_list);
+ blk_remove_plug(conf->mddev->queue);
+ spin_unlock_irq(&conf->device_lock);
+ /* flush any pending bitmap writes to
+ * disk before proceeding w/ I/O */
+ bitmap_unplug(conf->mddev->bitmap);
+
+ while (bio) { /* submit pending writes */
+ struct bio *next = bio->bi_next;
+ bio->bi_next = NULL;
+ generic_make_request(bio);
+ bio = next;
+ }
+ rv = 1;
+ } else
+ spin_unlock_irq(&conf->device_lock);
+ return rv;
+}
+
/* Barriers....
* Sometimes we need to suspend IO while we do something else,
* either some resync/recovery, or reconfigure the array.
@@ -673,15 +704,23 @@
/* stop syncio and normal IO and wait for everything to
* go quite.
* We increment barrier and nr_waiting, and then
- * wait until barrier+nr_pending match nr_queued+2
+ * wait until nr_pending match nr_queued+1
+ * This is called in the context of one normal IO request
+ * that has failed. Thus any sync request that might be pending
+ * will be blocked by nr_pending, and we need to wait for
+ * pending IO requests to complete or be queued for re-try.
+ * Thus the number queued (nr_queued) plus this request (1)
+ * must match the number of pending IOs (nr_pending) before
+ * we continue.
*/
spin_lock_irq(&conf->resync_lock);
conf->barrier++;
conf->nr_waiting++;
wait_event_lock_irq(conf->wait_barrier,
- conf->barrier+conf->nr_pending == conf->nr_queued+2,
+ conf->nr_pending == conf->nr_queued+1,
conf->resync_lock,
- raid1_unplug(conf->mddev->queue));
+ ({ flush_pending_writes(conf);
+ raid1_unplug(conf->mddev->queue); }));
spin_unlock_irq(&conf->resync_lock);
}
static void unfreeze_array(conf_t *conf)
@@ -907,6 +946,9 @@
blk_plug_device(mddev->queue);
spin_unlock_irqrestore(&conf->device_lock, flags);
+ /* In case raid1d snuck into freeze_array */
+ wake_up(&conf->wait_barrier);
+
if (do_sync)
md_wakeup_thread(mddev->thread);
#if 0
@@ -1473,28 +1515,14 @@
for (;;) {
char b[BDEVNAME_SIZE];
+
+ unplug += flush_pending_writes(conf);
+
spin_lock_irqsave(&conf->device_lock, flags);
-
- if (conf->pending_bio_list.head) {
- bio = bio_list_get(&conf->pending_bio_list);
- blk_remove_plug(mddev->queue);
+ if (list_empty(head)) {
spin_unlock_irqrestore(&conf->device_lock, flags);
- /* flush any pending bitmap writes to disk before proceeding w/ I/O */
- bitmap_unplug(mddev->bitmap);
-
- while (bio) { /* submit pending writes */
- struct bio *next = bio->bi_next;
- bio->bi_next = NULL;
- generic_make_request(bio);
- bio = next;
- }
- unplug = 1;
-
- continue;
- }
-
- if (list_empty(head))
break;
+ }
r1_bio = list_entry(head->prev, r1bio_t, retry_list);
list_del(head->prev);
conf->nr_queued--;
@@ -1590,7 +1618,6 @@
}
}
}
- spin_unlock_irqrestore(&conf->device_lock, flags);
if (unplug)
unplug_slaves(mddev);
}
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 017f581..32389d2 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -537,7 +537,8 @@
current_distance = abs(r10_bio->devs[slot].addr -
conf->mirrors[disk].head_position);
- /* Find the disk whose head is closest */
+ /* Find the disk whose head is closest,
+ * or - for far > 1 - find the closest to partition beginning */
for (nslot = slot; nslot < conf->copies; nslot++) {
int ndisk = r10_bio->devs[nslot].devnum;
@@ -557,8 +558,13 @@
slot = nslot;
break;
}
- new_distance = abs(r10_bio->devs[nslot].addr -
- conf->mirrors[ndisk].head_position);
+
+ /* for far > 1 always use the lowest address */
+ if (conf->far_copies > 1)
+ new_distance = r10_bio->devs[nslot].addr;
+ else
+ new_distance = abs(r10_bio->devs[nslot].addr -
+ conf->mirrors[ndisk].head_position);
if (new_distance < current_distance) {
current_distance = new_distance;
disk = ndisk;
@@ -629,7 +635,36 @@
return ret;
}
+static int flush_pending_writes(conf_t *conf)
+{
+ /* Any writes that have been queued but are awaiting
+ * bitmap updates get flushed here.
+ * We return 1 if any requests were actually submitted.
+ */
+ int rv = 0;
+ spin_lock_irq(&conf->device_lock);
+
+ if (conf->pending_bio_list.head) {
+ struct bio *bio;
+ bio = bio_list_get(&conf->pending_bio_list);
+ blk_remove_plug(conf->mddev->queue);
+ spin_unlock_irq(&conf->device_lock);
+ /* flush any pending bitmap writes to disk
+ * before proceeding w/ I/O */
+ bitmap_unplug(conf->mddev->bitmap);
+
+ while (bio) { /* submit pending writes */
+ struct bio *next = bio->bi_next;
+ bio->bi_next = NULL;
+ generic_make_request(bio);
+ bio = next;
+ }
+ rv = 1;
+ } else
+ spin_unlock_irq(&conf->device_lock);
+ return rv;
+}
/* Barriers....
* Sometimes we need to suspend IO while we do something else,
* either some resync/recovery, or reconfigure the array.
@@ -712,15 +747,23 @@
/* stop syncio and normal IO and wait for everything to
* go quiet.
* We increment barrier and nr_waiting, and then
- * wait until barrier+nr_pending match nr_queued+2
+ * wait until nr_pending match nr_queued+1
+ * This is called in the context of one normal IO request
+ * that has failed. Thus any sync request that might be pending
+ * will be blocked by nr_pending, and we need to wait for
+ * pending IO requests to complete or be queued for re-try.
+ * Thus the number queued (nr_queued) plus this request (1)
+ * must match the number of pending IOs (nr_pending) before
+ * we continue.
*/
spin_lock_irq(&conf->resync_lock);
conf->barrier++;
conf->nr_waiting++;
wait_event_lock_irq(conf->wait_barrier,
- conf->barrier+conf->nr_pending == conf->nr_queued+2,
+ conf->nr_pending == conf->nr_queued+1,
conf->resync_lock,
- raid10_unplug(conf->mddev->queue));
+ ({ flush_pending_writes(conf);
+ raid10_unplug(conf->mddev->queue); }));
spin_unlock_irq(&conf->resync_lock);
}
@@ -892,6 +935,9 @@
blk_plug_device(mddev->queue);
spin_unlock_irqrestore(&conf->device_lock, flags);
+ /* In case raid10d snuck in to freeze_array */
+ wake_up(&conf->wait_barrier);
+
if (do_sync)
md_wakeup_thread(mddev->thread);
@@ -1464,28 +1510,14 @@
for (;;) {
char b[BDEVNAME_SIZE];
+
+ unplug += flush_pending_writes(conf);
+
spin_lock_irqsave(&conf->device_lock, flags);
-
- if (conf->pending_bio_list.head) {
- bio = bio_list_get(&conf->pending_bio_list);
- blk_remove_plug(mddev->queue);
+ if (list_empty(head)) {
spin_unlock_irqrestore(&conf->device_lock, flags);
- /* flush any pending bitmap writes to disk before proceeding w/ I/O */
- bitmap_unplug(mddev->bitmap);
-
- while (bio) { /* submit pending writes */
- struct bio *next = bio->bi_next;
- bio->bi_next = NULL;
- generic_make_request(bio);
- bio = next;
- }
- unplug = 1;
-
- continue;
- }
-
- if (list_empty(head))
break;
+ }
r10_bio = list_entry(head->prev, r10bio_t, retry_list);
list_del(head->prev);
conf->nr_queued--;
@@ -1548,7 +1580,6 @@
}
}
}
- spin_unlock_irqrestore(&conf->device_lock, flags);
if (unplug)
unplug_slaves(mddev);
}
@@ -1787,6 +1818,8 @@
if (j == conf->copies) {
/* Cannot recover, so abort the recovery */
put_buf(r10_bio);
+ if (rb2)
+ atomic_dec(&rb2->remaining);
r10_bio = rb2;
if (!test_and_set_bit(MD_RECOVERY_ERR, &mddev->recovery))
printk(KERN_INFO "raid10: %s: insufficient working devices for recovery.\n",
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index afd8296..13bac53d 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -48,31 +48,13 @@
unsigned int pdev_id;
unsigned int irq;
void __iomem *regs;
+ unsigned int rev;
};
#define MHZ (1000 * 1000)
#ifdef DEBUG
-static const unsigned int misc_div[] = {
- [0] = 1,
- [1] = 2,
- [2] = 4,
- [3] = 8,
- [4] = 16,
- [5] = 32,
- [6] = 64,
- [7] = 128,
- [8] = 3,
- [9] = 6,
- [10] = 12,
- [11] = 24,
- [12] = 48,
- [13] = 96,
- [14] = 192,
- [15] = 384,
-};
-
-static const unsigned int px_div[] = {
+static const unsigned int div_tab[] = {
[0] = 1,
[1] = 2,
[2] = 4,
@@ -101,12 +83,12 @@
static unsigned long decode_div(unsigned long pll2, unsigned long val,
unsigned int lshft, unsigned int selbit,
- unsigned long mask, const unsigned int *dtab)
+ unsigned long mask)
{
if (val & selbit)
pll2 = 288 * MHZ;
- return pll2 / dtab[(val >> lshft) & mask];
+ return pll2 / div_tab[(val >> lshft) & mask];
}
#define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x)
@@ -141,10 +123,10 @@
}
sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ;
- sdclk0 /= misc_div[((misct >> 8) & 0xf)];
+ sdclk0 /= div_tab[((misct >> 8) & 0xf)];
sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ;
- sdclk1 /= misc_div[((misct >> 16) & 0xf)];
+ sdclk1 /= div_tab[((misct >> 16) & 0xf)];
dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n",
misct, pm0, pm1);
@@ -158,19 +140,19 @@
"P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
"M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
(pmc & 3 ) == 0 ? '*' : '-',
- fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31, px_div)),
- fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15, misc_div)),
- fmt_freq(decode_div(pll2, pm0, 8, 1<<12, 15, misc_div)),
- fmt_freq(decode_div(pll2, pm0, 0, 1<<4, 15, misc_div)));
+ fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31)),
+ fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15)),
+ fmt_freq(decode_div(pll2, pm0, 8, 1<<12, 15)),
+ fmt_freq(decode_div(pll2, pm0, 0, 1<<4, 15)));
dev_dbg(sm->dev, "PM1[%c]: "
"P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
"M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
(pmc & 3 ) == 1 ? '*' : '-',
- fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31, px_div)),
- fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15, misc_div)),
- fmt_freq(decode_div(pll2, pm1, 8, 1<<12, 15, misc_div)),
- fmt_freq(decode_div(pll2, pm1, 0, 1<<4, 15, misc_div)));
+ fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31)),
+ fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15)),
+ fmt_freq(decode_div(pll2, pm1, 8, 1<<12, 15)),
+ fmt_freq(decode_div(pll2, pm1, 0, 1<<4, 15)));
}
static void sm501_dump_regs(struct sm501_devdata *sm)
@@ -436,46 +418,108 @@
unsigned long mclk;
int divider;
int shift;
+ unsigned int m, n, k;
};
+/* sm501_calc_clock
+ *
+ * Calculates the nearest discrete clock frequency that
+ * can be achieved with the specified input clock.
+ * the maximum divisor is 3 or 5
+ */
+
+static int sm501_calc_clock(unsigned long freq,
+ struct sm501_clock *clock,
+ int max_div,
+ unsigned long mclk,
+ long *best_diff)
+{
+ int ret = 0;
+ int divider;
+ int shift;
+ long diff;
+
+ /* try dividers 1 and 3 for CRT and for panel,
+ try divider 5 for panel only.*/
+
+ for (divider = 1; divider <= max_div; divider += 2) {
+ /* try all 8 shift values.*/
+ for (shift = 0; shift < 8; shift++) {
+ /* Calculate difference to requested clock */
+ diff = sm501fb_round_div(mclk, divider << shift) - freq;
+ if (diff < 0)
+ diff = -diff;
+
+ /* If it is less than the current, use it */
+ if (diff < *best_diff) {
+ *best_diff = diff;
+
+ clock->mclk = mclk;
+ clock->divider = divider;
+ clock->shift = shift;
+ ret = 1;
+ }
+ }
+ }
+
+ return ret;
+}
+
+/* sm501_calc_pll
+ *
+ * Calculates the nearest discrete clock frequency that can be
+ * achieved using the programmable PLL.
+ * the maximum divisor is 3 or 5
+ */
+
+static unsigned long sm501_calc_pll(unsigned long freq,
+ struct sm501_clock *clock,
+ int max_div)
+{
+ unsigned long mclk;
+ unsigned int m, n, k;
+ long best_diff = 999999999;
+
+ /*
+ * The SM502 datasheet doesn't specify the min/max values for M and N.
+ * N = 1 at least doesn't work in practice.
+ */
+ for (m = 2; m <= 255; m++) {
+ for (n = 2; n <= 127; n++) {
+ for (k = 0; k <= 1; k++) {
+ mclk = (24000000UL * m / n) >> k;
+
+ if (sm501_calc_clock(freq, clock, max_div,
+ mclk, &best_diff)) {
+ clock->m = m;
+ clock->n = n;
+ clock->k = k;
+ }
+ }
+ }
+ }
+
+ /* Return best clock. */
+ return clock->mclk / (clock->divider << clock->shift);
+}
+
/* sm501_select_clock
*
- * selects nearest discrete clock frequency the SM501 can achive
+ * Calculates the nearest discrete clock frequency that can be
+ * achieved using the 288MHz and 336MHz PLLs.
* the maximum divisor is 3 or 5
*/
+
static unsigned long sm501_select_clock(unsigned long freq,
struct sm501_clock *clock,
int max_div)
{
unsigned long mclk;
- int divider;
- int shift;
- long diff;
long best_diff = 999999999;
/* Try 288MHz and 336MHz clocks. */
for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) {
- /* try dividers 1 and 3 for CRT and for panel,
- try divider 5 for panel only.*/
-
- for (divider = 1; divider <= max_div; divider += 2) {
- /* try all 8 shift values.*/
- for (shift = 0; shift < 8; shift++) {
- /* Calculate difference to requested clock */
- diff = sm501fb_round_div(mclk, divider << shift) - freq;
- if (diff < 0)
- diff = -diff;
-
- /* If it is less than the current, use it */
- if (diff < best_diff) {
- best_diff = diff;
-
- clock->mclk = mclk;
- clock->divider = divider;
- clock->shift = shift;
- }
- }
- }
+ sm501_calc_clock(freq, clock, max_div, mclk, &best_diff);
}
/* Return best clock. */
@@ -497,6 +541,7 @@
unsigned long gate = readl(sm->regs + SM501_CURRENT_GATE);
unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK);
unsigned char reg;
+ unsigned int pll_reg = 0;
unsigned long sm501_freq; /* the actual frequency acheived */
struct sm501_clock to;
@@ -511,14 +556,28 @@
* requested frequency the value must be multiplied by
* 2. This clock also has an additional pre divisor */
- sm501_freq = (sm501_select_clock(2 * req_freq, &to, 5) / 2);
- reg=to.shift & 0x07;/* bottom 3 bits are shift */
- if (to.divider == 3)
- reg |= 0x08; /* /3 divider required */
- else if (to.divider == 5)
- reg |= 0x10; /* /5 divider required */
- if (to.mclk != 288000000)
- reg |= 0x20; /* which mclk pll is source */
+ if (sm->rev >= 0xC0) {
+ /* SM502 -> use the programmable PLL */
+ sm501_freq = (sm501_calc_pll(2 * req_freq,
+ &to, 5) / 2);
+ reg = to.shift & 0x07;/* bottom 3 bits are shift */
+ if (to.divider == 3)
+ reg |= 0x08; /* /3 divider required */
+ else if (to.divider == 5)
+ reg |= 0x10; /* /5 divider required */
+ reg |= 0x40; /* select the programmable PLL */
+ pll_reg = 0x20000 | (to.k << 15) | (to.n << 8) | to.m;
+ } else {
+ sm501_freq = (sm501_select_clock(2 * req_freq,
+ &to, 5) / 2);
+ reg = to.shift & 0x07;/* bottom 3 bits are shift */
+ if (to.divider == 3)
+ reg |= 0x08; /* /3 divider required */
+ else if (to.divider == 5)
+ reg |= 0x10; /* /5 divider required */
+ if (to.mclk != 288000000)
+ reg |= 0x20; /* which mclk pll is source */
+ }
break;
case SM501_CLOCK_V2XCLK:
@@ -579,6 +638,10 @@
}
writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
+
+ if (pll_reg)
+ writel(pll_reg, sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
+
sm501_sync_regs(sm);
dev_info(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
@@ -599,15 +662,24 @@
* finds the closest available frequency for a given clock
*/
-unsigned long sm501_find_clock(int clksrc,
+unsigned long sm501_find_clock(struct device *dev,
+ int clksrc,
unsigned long req_freq)
{
+ struct sm501_devdata *sm = dev_get_drvdata(dev);
unsigned long sm501_freq; /* the frequency achiveable by the 501 */
struct sm501_clock to;
switch (clksrc) {
case SM501_CLOCK_P2XCLK:
- sm501_freq = (sm501_select_clock(2 * req_freq, &to, 5) / 2);
+ if (sm->rev >= 0xC0) {
+ /* SM502 -> use the programmable PLL */
+ sm501_freq = (sm501_calc_pll(2 * req_freq,
+ &to, 5) / 2);
+ } else {
+ sm501_freq = (sm501_select_clock(2 * req_freq,
+ &to, 5) / 2);
+ }
break;
case SM501_CLOCK_V2XCLK:
@@ -914,6 +986,8 @@
dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n",
sm->regs, devid, (unsigned long)mem_avail >> 20, sm->irq);
+ sm->rev = devid & SM501_DEVICEID_REVMASK;
+
sm501_dump_gate(sm);
ret = device_create_file(sm->dev, &dev_attr_dbg_regs);
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index bb269d0..6cb7812 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -1078,7 +1078,8 @@
if (!acpi_evalf(hkey_handle, &s, "MHKG", "d"))
return -EIO;
- return ((s & TP_HOTKEY_TABLET_MASK) != 0);
+ *status = ((s & TP_HOTKEY_TABLET_MASK) != 0);
+ return 0;
}
/*
diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig
index 1d3b84b..553a990 100644
--- a/drivers/parisc/Kconfig
+++ b/drivers/parisc/Kconfig
@@ -103,6 +103,11 @@
depends on PCI_LBA
default PCI_LBA
+config IOMMU_HELPER
+ bool
+ depends on IOMMU_SBA || IOMMU_CCIO
+ default y
+
#config PCI_EPIC
# bool "EPIC/SAGA PCI support"
# depends on PCI
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index d08b284..60d338c 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -43,6 +43,7 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/scatterlist.h>
+#include <linux/iommu-helper.h>
#include <asm/byteorder.h>
#include <asm/cache.h> /* for L1_CACHE_BYTES */
@@ -302,13 +303,17 @@
*/
#define CCIO_SEARCH_LOOP(ioc, res_idx, mask, size) \
for(; res_ptr < res_end; ++res_ptr) { \
- if(0 == (*res_ptr & mask)) { \
- *res_ptr |= mask; \
- res_idx = (unsigned int)((unsigned long)res_ptr - (unsigned long)ioc->res_map); \
- ioc->res_hint = res_idx + (size >> 3); \
- goto resource_found; \
- } \
- }
+ int ret;\
+ unsigned int idx;\
+ idx = (unsigned int)((unsigned long)res_ptr - (unsigned long)ioc->res_map); \
+ ret = iommu_is_span_boundary(idx << 3, pages_needed, 0, boundary_size);\
+ if ((0 == (*res_ptr & mask)) && !ret) { \
+ *res_ptr |= mask; \
+ res_idx = idx;\
+ ioc->res_hint = res_idx + (size >> 3); \
+ goto resource_found; \
+ } \
+ }
#define CCIO_FIND_FREE_MAPPING(ioa, res_idx, mask, size) \
u##size *res_ptr = (u##size *)&((ioc)->res_map[ioa->res_hint & ~((size >> 3) - 1)]); \
@@ -341,10 +346,11 @@
* of available pages for the requested size.
*/
static int
-ccio_alloc_range(struct ioc *ioc, size_t size)
+ccio_alloc_range(struct ioc *ioc, struct device *dev, size_t size)
{
unsigned int pages_needed = size >> IOVP_SHIFT;
unsigned int res_idx;
+ unsigned long boundary_size;
#ifdef CCIO_SEARCH_TIME
unsigned long cr_start = mfctl(16);
#endif
@@ -360,6 +366,9 @@
** ggg sacrifices another 710 to the computer gods.
*/
+ boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1, 1 << IOVP_SHIFT);
+ boundary_size >>= IOVP_SHIFT;
+
if (pages_needed <= 8) {
/*
* LAN traffic will not thrash the TLB IFF the same NIC
@@ -760,7 +769,7 @@
ioc->msingle_pages += size >> IOVP_SHIFT;
#endif
- idx = ccio_alloc_range(ioc, size);
+ idx = ccio_alloc_range(ioc, dev, size);
iovp = (dma_addr_t)MKIOVP(idx);
pdir_start = &(ioc->pdir_base[idx]);
diff --git a/drivers/parisc/iommu-helpers.h b/drivers/parisc/iommu-helpers.h
index 97ba828..a9c46cc 100644
--- a/drivers/parisc/iommu-helpers.h
+++ b/drivers/parisc/iommu-helpers.h
@@ -96,8 +96,8 @@
static inline unsigned int
iommu_coalesce_chunks(struct ioc *ioc, struct device *dev,
- struct scatterlist *startsg, int nents,
- int (*iommu_alloc_range)(struct ioc *, size_t))
+ struct scatterlist *startsg, int nents,
+ int (*iommu_alloc_range)(struct ioc *, struct device *, size_t))
{
struct scatterlist *contig_sg; /* contig chunk head */
unsigned long dma_offset, dma_len; /* start/len of DMA stream */
@@ -166,7 +166,7 @@
dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE);
sg_dma_address(contig_sg) =
PIDE_FLAG
- | (iommu_alloc_range(ioc, dma_len) << IOVP_SHIFT)
+ | (iommu_alloc_range(ioc, dev, dma_len) << IOVP_SHIFT)
| dma_offset;
n_mappings++;
}
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index d06627c..e834127 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -29,6 +29,7 @@
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/scatterlist.h>
+#include <linux/iommu-helper.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -313,6 +314,12 @@
#define RESMAP_MASK(n) (~0UL << (BITS_PER_LONG - (n)))
#define RESMAP_IDX_MASK (sizeof(unsigned long) - 1)
+unsigned long ptr_to_pide(struct ioc *ioc, unsigned long *res_ptr,
+ unsigned int bitshiftcnt)
+{
+ return (((unsigned long)res_ptr - (unsigned long)ioc->res_map) << 3)
+ + bitshiftcnt;
+}
/**
* sba_search_bitmap - find free space in IO PDIR resource bitmap
@@ -324,19 +331,36 @@
* Cool perf optimization: search for log2(size) bits at a time.
*/
static SBA_INLINE unsigned long
-sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted)
+sba_search_bitmap(struct ioc *ioc, struct device *dev,
+ unsigned long bits_wanted)
{
unsigned long *res_ptr = ioc->res_hint;
unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]);
- unsigned long pide = ~0UL;
+ unsigned long pide = ~0UL, tpide;
+ unsigned long boundary_size;
+ unsigned long shift;
+ int ret;
+
+ boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1, 1 << IOVP_SHIFT);
+ boundary_size >>= IOVP_SHIFT;
+
+#if defined(ZX1_SUPPORT)
+ BUG_ON(ioc->ibase & ~IOVP_MASK);
+ shift = ioc->ibase >> IOVP_SHIFT;
+#else
+ shift = 0;
+#endif
if (bits_wanted > (BITS_PER_LONG/2)) {
/* Search word at a time - no mask needed */
for(; res_ptr < res_end; ++res_ptr) {
- if (*res_ptr == 0) {
+ tpide = ptr_to_pide(ioc, res_ptr, 0);
+ ret = iommu_is_span_boundary(tpide, bits_wanted,
+ shift,
+ boundary_size);
+ if ((*res_ptr == 0) && !ret) {
*res_ptr = RESMAP_MASK(bits_wanted);
- pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
- pide <<= 3; /* convert to bit address */
+ pide = tpide;
break;
}
}
@@ -365,11 +389,13 @@
{
DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr);
WARN_ON(mask == 0);
- if(((*res_ptr) & mask) == 0) {
+ tpide = ptr_to_pide(ioc, res_ptr, bitshiftcnt);
+ ret = iommu_is_span_boundary(tpide, bits_wanted,
+ shift,
+ boundary_size);
+ if ((((*res_ptr) & mask) == 0) && !ret) {
*res_ptr |= mask; /* mark resources busy! */
- pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
- pide <<= 3; /* convert to bit address */
- pide += bitshiftcnt;
+ pide = tpide;
break;
}
mask >>= o;
@@ -404,7 +430,7 @@
* resource bit map.
*/
static int
-sba_alloc_range(struct ioc *ioc, size_t size)
+sba_alloc_range(struct ioc *ioc, struct device *dev, size_t size)
{
unsigned int pages_needed = size >> IOVP_SHIFT;
#ifdef SBA_COLLECT_STATS
@@ -412,9 +438,9 @@
#endif
unsigned long pide;
- pide = sba_search_bitmap(ioc, pages_needed);
+ pide = sba_search_bitmap(ioc, dev, pages_needed);
if (pide >= (ioc->res_size << 3)) {
- pide = sba_search_bitmap(ioc, pages_needed);
+ pide = sba_search_bitmap(ioc, dev, pages_needed);
if (pide >= (ioc->res_size << 3))
panic("%s: I/O MMU @ %p is out of mapping resources\n",
__FILE__, ioc->ioc_hpa);
@@ -710,7 +736,7 @@
ioc->msingle_calls++;
ioc->msingle_pages += size >> IOVP_SHIFT;
#endif
- pide = sba_alloc_range(ioc, size);
+ pide = sba_alloc_range(ioc, dev, size);
iovp = (dma_addr_t) pide << IOVP_SHIFT;
DBG_RUN("%s() 0x%p -> 0x%lx\n",
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index ef5a6a2..6a9403d 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -145,13 +145,15 @@
child_bus = dev->subordinate;
child_bus->dev.parent = child_bus->bridge;
retval = device_register(&child_bus->dev);
- if (!retval)
+ if (retval)
+ dev_err(&dev->dev, "Error registering pci_bus,"
+ " continuing...\n");
+ else
retval = device_create_file(&child_bus->dev,
&dev_attr_cpuaffinity);
if (retval)
- dev_err(&dev->dev, "Error registering pci_bus"
- " device bridge symlink,"
- " continuing...\n");
+ dev_err(&dev->dev, "Error creating cpuaffinity"
+ " file, continuing...\n");
}
}
}
diff --git a/drivers/pci/hotplug-pci.c b/drivers/pci/hotplug-pci.c
index a590ef6..4d4a6447 100644
--- a/drivers/pci/hotplug-pci.c
+++ b/drivers/pci/hotplug-pci.c
@@ -4,7 +4,7 @@
#include "pci.h"
-unsigned int pci_do_scan_bus(struct pci_bus *bus)
+unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus)
{
unsigned int max;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index cf22f9e..5e50008 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -1085,7 +1085,7 @@
* This function should be called per *physical slot*,
* not per each slot object in ACPI namespace.
*/
-static int enable_device(struct acpiphp_slot *slot)
+static int __ref enable_device(struct acpiphp_slot *slot)
{
struct pci_dev *dev;
struct pci_bus *bus = slot->bridge->pci_bus;
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index 5e9be44..b3515fc 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -250,7 +250,7 @@
* Device configuration functions
*/
-int cpci_configure_slot(struct slot* slot)
+int __ref cpci_configure_slot(struct slot *slot)
{
struct pci_bus *parent;
int fn;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 6eba9b2..698975a 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -711,7 +711,8 @@
retval = pcie_write_cmd(slot, slot_cmd, cmd_mask);
if (retval) {
err("%s: Write command failed!\n", __FUNCTION__);
- return -1;
+ retval = -1;
+ goto out;
}
dbg("%s: SLOTCTRL %x write cmd %x\n",
__FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
@@ -722,7 +723,7 @@
* removed from the slot/adapter.
*/
msleep(1000);
-
+ out:
if (changed)
pcie_unmask_bad_dllp(ctrl);
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index dd50713..9372a84 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -167,7 +167,7 @@
}
}
-static int pciehp_add_bridge(struct pci_dev *dev)
+static int __ref pciehp_add_bridge(struct pci_dev *dev)
{
struct pci_bus *parent = dev->bus;
int pass, busnr, start = parent->secondary;
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
index 0a6b25e..a69a215 100644
--- a/drivers/pci/hotplug/shpchp_pci.c
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -96,7 +96,7 @@
}
}
-int shpchp_configure_device(struct slot *p_slot)
+int __ref shpchp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 4d23b9f..2db2e4b 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -286,7 +286,7 @@
}
}
-void pci_read_bridge_bases(struct pci_bus *child)
+void __devinit pci_read_bridge_bases(struct pci_bus *child)
{
struct pci_dev *dev = child->self;
u8 io_base_lo, io_limit_lo;
@@ -472,7 +472,7 @@
* them, we proceed to assigning numbers to the remaining buses in
* order to avoid overlaps between old and new bus numbers.
*/
-int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass)
+int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
{
struct pci_bus *child;
int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
@@ -1008,7 +1008,7 @@
return nr;
}
-unsigned int pci_scan_child_bus(struct pci_bus *bus)
+unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus)
{
unsigned int devfn, pass, max = bus->secondary;
struct pci_dev *dev;
@@ -1116,7 +1116,7 @@
return NULL;
}
-struct pci_bus *pci_scan_bus_parented(struct device *parent,
+struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent,
int bus, struct pci_ops *ops, void *sysdata)
{
struct pci_bus *b;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bbad4a9..e9a333d98 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1652,9 +1652,8 @@
pci_write_config_byte(dev, 0x75, 0x1);
pci_write_config_byte(dev, 0x77, 0x0);
- printk(KERN_INFO
- "PCI: VIA CX700 PCI parking/caching fixup on %s\n",
- pci_name(dev));
+ dev_info(&dev->dev,
+ "Disabling VIA CX700 PCI parking/caching\n");
}
}
}
@@ -1726,32 +1725,6 @@
quirk_msi_ht_cap);
-/*
- * Force enable MSI mapping capability on HT bridges
- */
-static void __devinit quirk_msi_ht_cap_enable(struct pci_dev *dev)
-{
- int pos, ttl = 48;
-
- pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
- while (pos && ttl--) {
- u8 flags;
-
- if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, &flags) == 0) {
- printk(KERN_INFO "PCI: Enabling HT MSI Mapping on %s\n",
- pci_name(dev));
-
- pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
- flags | HT_MSI_FLAGS_ENABLE);
- }
- pos = pci_find_next_ht_capability(dev, pos,
- HT_CAPTYPE_MSI_MAPPING);
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS,
- PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
- quirk_msi_ht_cap_enable);
-
/* The nVidia CK804 chipset may have 2 HT MSI mappings.
* MSI are supported if the MSI capability set in any of these mappings.
*/
@@ -1778,9 +1751,8 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
quirk_nvidia_ck804_msi_ht_cap);
-/*
- * Force enable MSI mapping capability on HT bridges */
-static inline void ht_enable_msi_mapping(struct pci_dev *dev)
+/* Force enable MSI mapping capability on HT bridges */
+static void __devinit ht_enable_msi_mapping(struct pci_dev *dev)
{
int pos, ttl = 48;
@@ -1799,6 +1771,9 @@
HT_CAPTYPE_MSI_MAPPING);
}
}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
+ ht_enable_msi_mapping);
static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
{
@@ -1830,7 +1805,7 @@
if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
&flags) == 0) {
- dev_info(&dev->dev, "Quirk disabling HT MSI mapping");
+ dev_info(&dev->dev, "Disabling HT MSI mapping");
pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
flags & ~HT_MSI_FLAGS_ENABLE);
}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 6402d69..82f5ad9 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -250,6 +250,15 @@
platforms. The support is integrated with the rest of
the Menelaus driver; it's not separate module.
+config RTC_DRV_S35390A
+ tristate "Seiko Instruments S-35390A"
+ help
+ If you say yes here you will get support for the Seiko
+ Instruments S-35390A.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-s35390a.
+
endif # I2C
comment "SPI RTC drivers"
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index ec703f3..872f1218f 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -45,6 +45,7 @@
obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o
+obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o
obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o
obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o
obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o
diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
new file mode 100644
index 0000000..e8abc90
--- /dev/null
+++ b/drivers/rtc/rtc-s35390a.c
@@ -0,0 +1,316 @@
+/*
+ * Seiko Instruments S-35390A RTC Driver
+ *
+ * Copyright (c) 2007 Byron Bradley
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/i2c.h>
+#include <linux/bitrev.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+
+#define S35390A_CMD_STATUS1 0
+#define S35390A_CMD_STATUS2 1
+#define S35390A_CMD_TIME1 2
+
+#define S35390A_BYTE_YEAR 0
+#define S35390A_BYTE_MONTH 1
+#define S35390A_BYTE_DAY 2
+#define S35390A_BYTE_WDAY 3
+#define S35390A_BYTE_HOURS 4
+#define S35390A_BYTE_MINS 5
+#define S35390A_BYTE_SECS 6
+
+#define S35390A_FLAG_POC 0x01
+#define S35390A_FLAG_BLD 0x02
+#define S35390A_FLAG_24H 0x40
+#define S35390A_FLAG_RESET 0x80
+#define S35390A_FLAG_TEST 0x01
+
+struct s35390a {
+ struct i2c_client *client[8];
+ struct rtc_device *rtc;
+ int twentyfourhour;
+};
+
+static int s35390a_set_reg(struct s35390a *s35390a, int reg, char *buf, int len)
+{
+ struct i2c_client *client = s35390a->client[reg];
+ struct i2c_msg msg[] = {
+ { client->addr, 0, len, buf },
+ };
+
+ if ((i2c_transfer(client->adapter, msg, 1)) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len)
+{
+ struct i2c_client *client = s35390a->client[reg];
+ struct i2c_msg msg[] = {
+ { client->addr, I2C_M_RD, len, buf },
+ };
+
+ if ((i2c_transfer(client->adapter, msg, 1)) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int s35390a_reset(struct s35390a *s35390a)
+{
+ char buf[1];
+
+ if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)) < 0)
+ return -EIO;
+
+ if (!(buf[0] & (S35390A_FLAG_POC | S35390A_FLAG_BLD)))
+ return 0;
+
+ buf[0] |= (S35390A_FLAG_RESET | S35390A_FLAG_24H);
+ buf[0] &= 0xf0;
+ return s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
+}
+
+static int s35390a_disable_test_mode(struct s35390a *s35390a)
+{
+ char buf[1];
+
+ if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf)) < 0)
+ return -EIO;
+
+ if (!(buf[0] & S35390A_FLAG_TEST))
+ return 0;
+
+ buf[0] &= ~S35390A_FLAG_TEST;
+ return s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf));
+}
+
+static char s35390a_hr2reg(struct s35390a *s35390a, int hour)
+{
+ if (s35390a->twentyfourhour)
+ return BIN2BCD(hour);
+
+ if (hour < 12)
+ return BIN2BCD(hour);
+
+ return 0x40 | BIN2BCD(hour - 12);
+}
+
+static int s35390a_reg2hr(struct s35390a *s35390a, char reg)
+{
+ unsigned hour;
+
+ if (s35390a->twentyfourhour)
+ return BCD2BIN(reg & 0x3f);
+
+ hour = BCD2BIN(reg & 0x3f);
+ if (reg & 0x40)
+ hour += 12;
+
+ return hour;
+}
+
+static int s35390a_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+ struct s35390a *s35390a = i2c_get_clientdata(client);
+ int i, err;
+ char buf[7];
+
+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d mday=%d, "
+ "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
+ tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
+ tm->tm_wday);
+
+ buf[S35390A_BYTE_YEAR] = BIN2BCD(tm->tm_year - 100);
+ buf[S35390A_BYTE_MONTH] = BIN2BCD(tm->tm_mon + 1);
+ buf[S35390A_BYTE_DAY] = BIN2BCD(tm->tm_mday);
+ buf[S35390A_BYTE_WDAY] = BIN2BCD(tm->tm_wday);
+ buf[S35390A_BYTE_HOURS] = s35390a_hr2reg(s35390a, tm->tm_hour);
+ buf[S35390A_BYTE_MINS] = BIN2BCD(tm->tm_min);
+ buf[S35390A_BYTE_SECS] = BIN2BCD(tm->tm_sec);
+
+ /* This chip expects the bits of each byte to be in reverse order */
+ for (i = 0; i < 7; ++i)
+ buf[i] = bitrev8(buf[i]);
+
+ err = s35390a_set_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
+
+ return err;
+}
+
+static int s35390a_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+ struct s35390a *s35390a = i2c_get_clientdata(client);
+ char buf[7];
+ int i, err;
+
+ err = s35390a_get_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
+ if (err < 0)
+ return err;
+
+ /* This chip returns the bits of each byte in reverse order */
+ for (i = 0; i < 7; ++i)
+ buf[i] = bitrev8(buf[i]);
+
+ tm->tm_sec = BCD2BIN(buf[S35390A_BYTE_SECS]);
+ tm->tm_min = BCD2BIN(buf[S35390A_BYTE_MINS]);
+ tm->tm_hour = s35390a_reg2hr(s35390a, buf[S35390A_BYTE_HOURS]);
+ tm->tm_wday = BCD2BIN(buf[S35390A_BYTE_WDAY]);
+ tm->tm_mday = BCD2BIN(buf[S35390A_BYTE_DAY]);
+ tm->tm_mon = BCD2BIN(buf[S35390A_BYTE_MONTH]) - 1;
+ tm->tm_year = BCD2BIN(buf[S35390A_BYTE_YEAR]) + 100;
+
+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, mday=%d, "
+ "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
+ tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
+ tm->tm_wday);
+
+ return rtc_valid_tm(tm);
+}
+
+static int s35390a_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ return s35390a_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int s35390a_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ return s35390a_set_datetime(to_i2c_client(dev), tm);
+}
+
+static const struct rtc_class_ops s35390a_rtc_ops = {
+ .read_time = s35390a_rtc_read_time,
+ .set_time = s35390a_rtc_set_time,
+};
+
+static struct i2c_driver s35390a_driver;
+
+static int s35390a_probe(struct i2c_client *client)
+{
+ int err;
+ unsigned int i;
+ struct s35390a *s35390a;
+ struct rtc_time tm;
+ char buf[1];
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ s35390a = kzalloc(sizeof(struct s35390a), GFP_KERNEL);
+ if (!s35390a) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ s35390a->client[0] = client;
+ i2c_set_clientdata(client, s35390a);
+
+ /* This chip uses multiple addresses, use dummy devices for them */
+ for (i = 1; i < 8; ++i) {
+ s35390a->client[i] = i2c_new_dummy(client->adapter,
+ client->addr + i, "rtc-s35390a");
+ if (!s35390a->client[i]) {
+ dev_err(&client->dev, "Address %02x unavailable\n",
+ client->addr + i);
+ err = -EBUSY;
+ goto exit_dummy;
+ }
+ }
+
+ err = s35390a_reset(s35390a);
+ if (err < 0) {
+ dev_err(&client->dev, "error resetting chip\n");
+ goto exit_dummy;
+ }
+
+ err = s35390a_disable_test_mode(s35390a);
+ if (err < 0) {
+ dev_err(&client->dev, "error disabling test mode\n");
+ goto exit_dummy;
+ }
+
+ err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
+ if (err < 0) {
+ dev_err(&client->dev, "error checking 12/24 hour mode\n");
+ goto exit_dummy;
+ }
+ if (buf[0] & S35390A_FLAG_24H)
+ s35390a->twentyfourhour = 1;
+ else
+ s35390a->twentyfourhour = 0;
+
+ if (s35390a_get_datetime(client, &tm) < 0)
+ dev_warn(&client->dev, "clock needs to be set\n");
+
+ s35390a->rtc = rtc_device_register(s35390a_driver.driver.name,
+ &client->dev, &s35390a_rtc_ops, THIS_MODULE);
+
+ if (IS_ERR(s35390a->rtc)) {
+ err = PTR_ERR(s35390a->rtc);
+ goto exit_dummy;
+ }
+ return 0;
+
+exit_dummy:
+ for (i = 1; i < 8; ++i)
+ if (s35390a->client[i])
+ i2c_unregister_device(s35390a->client[i]);
+ kfree(s35390a);
+ i2c_set_clientdata(client, NULL);
+
+exit:
+ return err;
+}
+
+static int s35390a_remove(struct i2c_client *client)
+{
+ unsigned int i;
+
+ struct s35390a *s35390a = i2c_get_clientdata(client);
+ for (i = 1; i < 8; ++i)
+ if (s35390a->client[i])
+ i2c_unregister_device(s35390a->client[i]);
+
+ rtc_device_unregister(s35390a->rtc);
+ kfree(s35390a);
+ i2c_set_clientdata(client, NULL);
+
+ return 0;
+}
+
+static struct i2c_driver s35390a_driver = {
+ .driver = {
+ .name = "rtc-s35390a",
+ },
+ .probe = s35390a_probe,
+ .remove = s35390a_remove,
+};
+
+static int __init s35390a_rtc_init(void)
+{
+ return i2c_add_driver(&s35390a_driver);
+}
+
+static void __exit s35390a_rtc_exit(void)
+{
+ i2c_del_driver(&s35390a_driver);
+}
+
+MODULE_AUTHOR("Byron Bradley <byron.bbradley@gmail.com>");
+MODULE_DESCRIPTION("S35390A RTC driver");
+MODULE_LICENSE("GPL");
+
+module_init(s35390a_rtc_init);
+module_exit(s35390a_rtc_exit);
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 6f09cbd..97c68d02 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -91,6 +91,8 @@
/* Archtek America Corp. */
/* Archtek SmartLink Modem 3334BT Plug & Play */
{ "GVC000F", 0 },
+ /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */
+ { "GVC0303", 0 },
/* Hayes */
/* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */
{ "HAY0001", 0 },
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index 348ee2c..c2bb11c 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -421,7 +421,7 @@
up->port.icount.tx++;
if (uart_circ_empty(xmit))
break;
- while (!serial_in(up, UART_LSR) & UART_LSR_THRE);
+ while (!(serial_in(up, UART_LSR) & UART_LSR_THRE));
} while (--count > 0);
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 253ed56..a86315a 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -42,6 +42,7 @@
/* driver internal data */
struct mpc52xx_psc __iomem *psc;
+ struct mpc52xx_psc_fifo __iomem *fifo;
unsigned int irq;
u8 bits_per_word;
u8 busy;
@@ -139,6 +140,7 @@
{
struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master);
struct mpc52xx_psc __iomem *psc = mps->psc;
+ struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo;
unsigned rb = 0; /* number of bytes receieved */
unsigned sb = 0; /* number of bytes sent */
unsigned char *rx_buf = (unsigned char *)t->rx_buf;
@@ -190,11 +192,11 @@
out_8(&psc->mode, 0);
} else {
out_8(&psc->mode, MPC52xx_PSC_MODE_FFULL);
- out_be16(&psc->rfalarm, rfalarm);
+ out_be16(&fifo->rfalarm, rfalarm);
}
out_be16(&psc->mpc52xx_psc_imr, MPC52xx_PSC_IMR_RXRDY);
wait_for_completion(&mps->done);
- recv_at_once = in_be16(&psc->rfnum);
+ recv_at_once = in_be16(&fifo->rfnum);
dev_dbg(&spi->dev, "%d bytes received\n", recv_at_once);
send_at_once = recv_at_once;
@@ -331,6 +333,7 @@
static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
{
struct mpc52xx_psc __iomem *psc = mps->psc;
+ struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo;
u32 mclken_div;
int ret = 0;
@@ -346,7 +349,7 @@
/* Disable interrupts, interrupts are based on alarm level */
out_be16(&psc->mpc52xx_psc_imr, 0);
out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
- out_8(&psc->rfcntl, 0);
+ out_8(&fifo->rfcntl, 0);
out_8(&psc->mode, MPC52xx_PSC_MODE_FFULL);
/* Configure 8bit codec mode as a SPI master and use EOF flags */
@@ -419,6 +422,8 @@
ret = -EFAULT;
goto free_master;
}
+ /* On the 5200, fifo regs are immediately ajacent to the psc regs */
+ mps->fifo = ((void __iomem *)mps->psc) + sizeof(struct mpc52xx_psc);
ret = request_irq(mps->irq, mpc52xx_psc_spi_isr, 0, "mpc52xx-psc-spi",
mps);
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 5c33cdb..a2b0aa4 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -87,12 +87,13 @@
If you are unsure about this, say N here.
config USB_SUSPEND
- bool "USB selective suspend/resume and wakeup (EXPERIMENTAL)"
- depends on USB && PM && EXPERIMENTAL
+ bool "USB selective suspend/resume and wakeup"
+ depends on USB && PM
help
If you say Y here, you can use driver calls or the sysfs
- "power/state" file to suspend or resume individual USB
- peripherals.
+ "power/level" file to suspend or resume individual USB
+ peripherals and to enable or disable autosuspend (see
+ Documentation/usb/power-management.txt for more details).
Also, USB "remote wakeup" signaling is supported, whereby some
USB devices (like keyboards and network adapters) can wake up
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f90ab5e..d9d1eb1 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -28,35 +28,38 @@
* devices is broken...
*/
static const struct usb_device_id usb_quirk_list[] = {
- /* Action Semiconductor flash disk */
- { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255},
-
/* CBM - Flash disk */
{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* HP 5300/5370C scanner */
- { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 },
+ { USB_DEVICE(0x03f0, 0x0701), .driver_info =
+ USB_QUIRK_STRING_FETCH_255 },
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Philips PSC805 audio device */
+ { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
- /* INTEL VALUE SSD */
- { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
-
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Philips PSC805 audio device */
- { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Action Semiconductor flash disk */
+ { USB_DEVICE(0x10d6, 0x2200), .driver_info =
+ USB_QUIRK_STRING_FETCH_255 },
/* SKYMEDI USB_DRIVE */
{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* INTEL VALUE SSD */
+ { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
+
{ } /* terminating entry must be last */
};
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index f6f1990..1f0db51 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -233,7 +233,7 @@
* singlethreaded. Its job doesn't justify running on more
* than one CPU.
*/
- ksuspend_usb_wq = create_singlethread_workqueue("ksuspend_usbd");
+ ksuspend_usb_wq = create_freezeable_workqueue("ksuspend_usbd");
if (!ksuspend_usb_wq)
return -ENOMEM;
return 0;
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 4f6bfa1..2c32bd0 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -92,7 +92,6 @@
u8 *current_rx_buf;
u8 printer_status;
u8 reset_printer;
- struct class_device *printer_class_dev;
struct cdev printer_cdev;
struct device *pdev;
u8 printer_cdev_open;
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 4402d6f0..096c41cc 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -103,6 +103,12 @@
#error "Can't configure both IXP and PXA"
#endif
+/* IXP doesn't yet support <linux/clk.h> */
+#define clk_get(dev,name) NULL
+#define clk_enable(clk) do { } while (0)
+#define clk_disable(clk) do { } while (0)
+#define clk_put(clk) do { } while (0)
+
#endif
#include "pxa2xx_udc.h"
@@ -934,20 +940,31 @@
/* We disable the UDC -- and its 48 MHz clock -- whenever it's not
* in active use.
*/
-static int pullup(struct pxa2xx_udc *udc, int is_active)
+static int pullup(struct pxa2xx_udc *udc)
{
- is_active = is_active && udc->vbus && udc->pullup;
+ int is_active = udc->vbus && udc->pullup && !udc->suspended;
DMSG("%s\n", is_active ? "active" : "inactive");
- if (is_active)
- udc_enable(udc);
- else {
- if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
- DMSG("disconnect %s\n", udc->driver
- ? udc->driver->driver.name
- : "(no driver)");
- stop_activity(udc, udc->driver);
+ if (is_active) {
+ if (!udc->active) {
+ udc->active = 1;
+ /* Enable clock for USB device */
+ clk_enable(udc->clk);
+ udc_enable(udc);
}
- udc_disable(udc);
+ } else {
+ if (udc->active) {
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
+ DMSG("disconnect %s\n", udc->driver
+ ? udc->driver->driver.name
+ : "(no driver)");
+ stop_activity(udc, udc->driver);
+ }
+ udc_disable(udc);
+ /* Disable clock for USB device */
+ clk_disable(udc->clk);
+ udc->active = 0;
+ }
+
}
return 0;
}
@@ -958,9 +975,9 @@
struct pxa2xx_udc *udc;
udc = container_of(_gadget, struct pxa2xx_udc, gadget);
- udc->vbus = is_active = (is_active != 0);
+ udc->vbus = (is_active != 0);
DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
- pullup(udc, is_active);
+ pullup(udc);
return 0;
}
@@ -975,9 +992,8 @@
if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
return -EOPNOTSUPP;
- is_active = (is_active != 0);
- udc->pullup = is_active;
- pullup(udc, is_active);
+ udc->pullup = (is_active != 0);
+ pullup(udc);
return 0;
}
@@ -997,7 +1013,7 @@
#ifdef CONFIG_USB_GADGET_DEBUG_FS
static int
-udc_seq_show(struct seq_file *m, void *d)
+udc_seq_show(struct seq_file *m, void *_d)
{
struct pxa2xx_udc *dev = m->private;
unsigned long flags;
@@ -1146,11 +1162,6 @@
udc_clear_mask_UDCCR(UDCCR_UDE);
-#ifdef CONFIG_ARCH_PXA
- /* Disable clock for USB device */
- clk_disable(dev->clk);
-#endif
-
ep0_idle (dev);
dev->gadget.speed = USB_SPEED_UNKNOWN;
}
@@ -1191,11 +1202,6 @@
{
udc_clear_mask_UDCCR(UDCCR_UDE);
-#ifdef CONFIG_ARCH_PXA
- /* Enable clock for USB device */
- clk_enable(dev->clk);
-#endif
-
/* try to clear these bits before we enable the udc */
udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
@@ -1286,7 +1292,7 @@
* for set_configuration as well as eventual disconnect.
*/
DMSG("registered gadget driver '%s'\n", driver->driver.name);
- pullup(dev, 1);
+ pullup(dev);
dump_state(dev);
return 0;
}
@@ -1329,7 +1335,8 @@
return -EINVAL;
local_irq_disable();
- pullup(dev, 0);
+ dev->pullup = 0;
+ pullup(dev);
stop_activity(dev, driver);
local_irq_enable();
@@ -2131,13 +2138,11 @@
if (irq < 0)
return -ENODEV;
-#ifdef CONFIG_ARCH_PXA
dev->clk = clk_get(&pdev->dev, "UDCCLK");
if (IS_ERR(dev->clk)) {
retval = PTR_ERR(dev->clk);
goto err_clk;
}
-#endif
pr_debug("%s: IRQ %d%s%s\n", driver_name, irq,
dev->has_cfr ? "" : " (!cfr)",
@@ -2250,10 +2255,8 @@
if (dev->mach->gpio_vbus)
gpio_free(dev->mach->gpio_vbus);
err_gpio_vbus:
-#ifdef CONFIG_ARCH_PXA
clk_put(dev->clk);
err_clk:
-#endif
return retval;
}
@@ -2269,7 +2272,9 @@
if (dev->driver)
return -EBUSY;
- udc_disable(dev);
+ dev->pullup = 0;
+ pullup(dev);
+
remove_debug_files(dev);
if (dev->got_irq) {
@@ -2289,9 +2294,7 @@
if (dev->mach->gpio_pullup)
gpio_free(dev->mach->gpio_pullup);
-#ifdef CONFIG_ARCH_PXA
clk_put(dev->clk);
-#endif
platform_set_drvdata(pdev, NULL);
the_controller = NULL;
@@ -2317,10 +2320,15 @@
static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state)
{
struct pxa2xx_udc *udc = platform_get_drvdata(dev);
+ unsigned long flags;
if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
WARN("USB host won't detect disconnect!\n");
- pullup(udc, 0);
+ udc->suspended = 1;
+
+ local_irq_save(flags);
+ pullup(udc);
+ local_irq_restore(flags);
return 0;
}
@@ -2328,8 +2336,12 @@
static int pxa2xx_udc_resume(struct platform_device *dev)
{
struct pxa2xx_udc *udc = platform_get_drvdata(dev);
+ unsigned long flags;
- pullup(udc, 1);
+ udc->suspended = 0;
+ local_irq_save(flags);
+ pullup(udc);
+ local_irq_restore(flags);
return 0;
}
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
index b67e3ff..e2c19e8 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa2xx_udc.h
@@ -119,7 +119,9 @@
has_cfr : 1,
req_pending : 1,
req_std : 1,
- req_config : 1;
+ req_config : 1,
+ suspended : 1,
+ active : 1;
#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
struct timer_list timer;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 776a97f3..2e49de8 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -319,10 +319,10 @@
if (likely (last->urb != urb)) {
ehci_urb_done(ehci, last->urb, last_status);
count++;
+ last_status = -EINPROGRESS;
}
ehci_qtd_free (ehci, last);
last = NULL;
- last_status = -EINPROGRESS;
}
/* ignore urbs submitted during completions we reported */
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 0130fd8..d7071c8 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -911,8 +911,7 @@
buf[0] = 0;
for (i = 0; i < ports; i++) {
- u32 status = isp116x->rhport[i] =
- isp116x_read_reg32(isp116x, i ? HCRHPORT2 : HCRHPORT1);
+ u32 status = isp116x_read_reg32(isp116x, i ? HCRHPORT2 : HCRHPORT1);
if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
| RH_PS_OCIC | RH_PS_PRSC)) {
@@ -1031,7 +1030,9 @@
DBG("GetPortStatus\n");
if (!wIndex || wIndex > ports)
goto error;
- tmp = isp116x->rhport[--wIndex];
+ spin_lock_irqsave(&isp116x->lock, flags);
+ tmp = isp116x_read_reg32(isp116x, (--wIndex) ? HCRHPORT2 : HCRHPORT1);
+ spin_unlock_irqrestore(&isp116x->lock, flags);
*(__le32 *) buf = cpu_to_le32(tmp);
DBG("GetPortStatus: port[%d] %08x\n", wIndex + 1, tmp);
break;
@@ -1080,8 +1081,6 @@
spin_lock_irqsave(&isp116x->lock, flags);
isp116x_write_reg32(isp116x, wIndex
? HCRHPORT2 : HCRHPORT1, tmp);
- isp116x->rhport[wIndex] =
- isp116x_read_reg32(isp116x, wIndex ? HCRHPORT2 : HCRHPORT1);
spin_unlock_irqrestore(&isp116x->lock, flags);
break;
case SetPortFeature:
@@ -1095,24 +1094,22 @@
spin_lock_irqsave(&isp116x->lock, flags);
isp116x_write_reg32(isp116x, wIndex
? HCRHPORT2 : HCRHPORT1, RH_PS_PSS);
+ spin_unlock_irqrestore(&isp116x->lock, flags);
break;
case USB_PORT_FEAT_POWER:
DBG("USB_PORT_FEAT_POWER\n");
spin_lock_irqsave(&isp116x->lock, flags);
isp116x_write_reg32(isp116x, wIndex
? HCRHPORT2 : HCRHPORT1, RH_PS_PPS);
+ spin_unlock_irqrestore(&isp116x->lock, flags);
break;
case USB_PORT_FEAT_RESET:
DBG("USB_PORT_FEAT_RESET\n");
root_port_reset(isp116x, wIndex);
- spin_lock_irqsave(&isp116x->lock, flags);
break;
default:
goto error;
}
- isp116x->rhport[wIndex] =
- isp116x_read_reg32(isp116x, wIndex ? HCRHPORT2 : HCRHPORT1);
- spin_unlock_irqrestore(&isp116x->lock, flags);
break;
default:
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index b91e2ed..595b90a99 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -270,7 +270,6 @@
u32 rhdesca;
u32 rhdescb;
u32 rhstatus;
- u32 rhport[2];
/* async schedule: control, bulk */
struct list_head async;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 76db2fef..91dc433 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -92,6 +92,7 @@
};
static int ftdi_jtag_probe (struct usb_serial *serial);
+static int ftdi_mtxorb_hack_setup (struct usb_serial *serial);
static void ftdi_USB_UIRT_setup (struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv);
@@ -99,6 +100,10 @@
.probe = ftdi_jtag_probe,
};
+static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = {
+ .probe = ftdi_mtxorb_hack_setup,
+};
+
static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
.port_probe = ftdi_USB_UIRT_setup,
};
@@ -161,6 +166,8 @@
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+ { USB_DEVICE(MTXORB_VK_VID, MTXORB_VK_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
@@ -274,6 +281,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
@@ -1088,6 +1096,23 @@
return 0;
}
+/*
+ * The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
+ * We have to correct it if we want to read from it.
+ */
+static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
+{
+ struct usb_host_endpoint *ep = serial->dev->ep_in[1];
+ struct usb_endpoint_descriptor *ep_desc = &ep->desc;
+
+ if (ep->enabled && ep_desc->wMaxPacketSize == 0) {
+ ep_desc->wMaxPacketSize = 0x40;
+ info("Fixing invalid wMaxPacketSize on read pipe");
+ }
+
+ return 0;
+}
+
/* ftdi_shutdown is called from usbserial:usb_serial_disconnect
* it is called when the usb device is disconnected
*
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 6eee2ab..e1eb742 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -102,6 +102,13 @@
* (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
+/*
+ * The following are the values for the Matrix Orbital VK204-25-USB
+ * display, which use the FT232RL.
+ */
+#define MTXORB_VK_VID 0x1b3d
+#define MTXORB_VK_PID 0x0158
+
/* Interbiometrics USB I/O Board */
/* Developed for Interbiometrics by Rudolf Gugler */
#define INTERBIOMETRICS_VID 0x1209
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 869ecd3..aeeb9cb 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -110,11 +110,20 @@
/* vendor id and device id defines */
+/* The native mos7840/7820 component */
#define USB_VENDOR_ID_MOSCHIP 0x9710
#define MOSCHIP_DEVICE_ID_7840 0x7840
#define MOSCHIP_DEVICE_ID_7820 0x7820
+/* The native component can have its vendor/device id's overridden
+ * in vendor-specific implementations. Such devices can be handled
+ * by making a change here, in moschip_port_id_table, and in
+ * moschip_id_table_combined
+ */
+#define USB_VENDOR_ID_BANDB 0x0856
+#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
+#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
-/* Interrupt Rotinue Defines */
+/* Interrupt Routine Defines */
#define SERIAL_IIR_RLS 0x06
#define SERIAL_IIR_MS 0x00
@@ -159,12 +168,16 @@
static struct usb_device_id moschip_port_id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{} /* terminating entry */
};
static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{} /* terminating entry */
};
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index af2674c..828a437 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -120,6 +120,9 @@
#define ANYDATA_PRODUCT_ADU_E100A 0x6501
#define ANYDATA_PRODUCT_ADU_500A 0x6502
+#define AXESSTEL_VENDOR_ID 0x1726
+#define AXESSTEL_PRODUCT_MV110H 0x1000
+
#define BANDRICH_VENDOR_ID 0x1A8D
#define BANDRICH_PRODUCT_C100_1 0x1002
#define BANDRICH_PRODUCT_C100_2 0x1003
@@ -192,6 +195,7 @@
{ USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
+ { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index 958f5b1..b9b8ede 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -170,7 +170,6 @@
if (!sg)
sg = scsi_sglist(srb);
- buflen = min(buflen, scsi_bufflen(srb));
/* This loop handles a single s-g list entry, which may
* include multiple pages. Find the initial page structure
@@ -232,6 +231,7 @@
unsigned int offset = 0;
struct scatterlist *sg = NULL;
+ buflen = min(buflen, scsi_bufflen(srb));
buflen = usb_stor_access_xfer_buf(buffer, buflen, srb, &sg, &offset,
TO_XFER_BUF);
if (buflen < scsi_bufflen(srb))
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index e83dfba..742b5c6 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -237,12 +237,14 @@
/* check we can fit these values into the registers */
- if (var->hsync_len > 255 || var->vsync_len > 255)
+ if (var->hsync_len > 255 || var->vsync_len > 63)
return -EINVAL;
- if ((var->xres + var->right_margin) >= 4096)
+ /* hdisplay end and hsync start */
+ if ((var->xres + var->right_margin) > 4096)
return -EINVAL;
+ /* vdisplay end and vsync start */
if ((var->yres + var->lower_margin) > 2048)
return -EINVAL;
@@ -281,19 +283,21 @@
var->blue.length = var->bits_per_pixel;
var->blue.offset = 0;
var->transp.length = 0;
+ var->transp.offset = 0;
break;
case 16:
if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) {
- var->red.offset = 11;
- var->green.offset = 5;
- var->blue.offset = 0;
- } else {
var->blue.offset = 11;
var->green.offset = 5;
var->red.offset = 0;
+ } else {
+ var->red.offset = 11;
+ var->green.offset = 5;
+ var->blue.offset = 0;
}
+ var->transp.offset = 0;
var->red.length = 5;
var->green.length = 6;
@@ -397,7 +401,7 @@
break;
case 16:
- info->fix.visual = FB_VISUAL_DIRECTCOLOR;
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 32:
@@ -613,6 +617,7 @@
case 16:
control |= SM501_DC_CRT_CONTROL_16BPP;
+ sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE);
break;
case 32:
@@ -750,6 +755,7 @@
case 16:
control |= SM501_DC_PANEL_CONTROL_16BPP;
+ sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE);
break;
case 32:
diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 70fb4ee..919ce75 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -564,19 +564,46 @@
t_outb(val, 0x3CF);
}
-static inline void enable_mmio(void)
+static void enable_mmio(void)
{
+ unsigned char tmp;
+
/* Goto New Mode */
outb(0x0B, 0x3C4);
inb(0x3C5);
/* Unprotect registers */
outb(NewMode1, 0x3C4);
+ tmp = inb(0x3C5);
outb(0x80, 0x3C5);
/* Enable MMIO */
outb(PCIReg, 0x3D4);
outb(inb(0x3D5) | 0x01, 0x3D5);
+
+ t_outb(NewMode1, 0x3C4);
+ t_outb(tmp, 0x3C5);
+}
+
+static void disable_mmio(void)
+{
+ unsigned char tmp;
+
+ /* Goto New Mode */
+ t_outb(0x0B, 0x3C4);
+ t_inb(0x3C5);
+
+ /* Unprotect registers */
+ t_outb(NewMode1, 0x3C4);
+ tmp = t_inb(0x3C5);
+ t_outb(0x80, 0x3C5);
+
+ /* Disable MMIO */
+ t_outb(PCIReg, 0x3D4);
+ t_outb(t_inb(0x3D5) & ~0x01, 0x3D5);
+
+ outb(NewMode1, 0x3C4);
+ outb(tmp, 0x3C5);
}
#define crtc_unlock() write3X4(CRTVSyncEnd, read3X4(CRTVSyncEnd) & 0x7F)
@@ -1239,9 +1266,9 @@
default_par.io_virt = ioremap_nocache(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
if (!default_par.io_virt) {
- release_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
debug("ioremap failed\n");
- return -1;
+ err = -1;
+ goto out_unmap1;
}
enable_mmio();
@@ -1252,25 +1279,21 @@
if (!request_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len, "tridentfb")) {
debug("request_mem_region failed!\n");
+ disable_mmio();
err = -1;
- goto out_unmap;
+ goto out_unmap1;
}
fb_info.screen_base = ioremap_nocache(tridentfb_fix.smem_start,
tridentfb_fix.smem_len);
if (!fb_info.screen_base) {
- release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
debug("ioremap failed\n");
err = -1;
- goto out_unmap;
+ goto out_unmap2;
}
output("%s board found\n", pci_name(dev));
-#if 0
- output("Trident board found : mem = %X, io = %X, mem_v = %X, io_v = %X\n",
- tridentfb_fix.smem_start, tridentfb_fix.mmio_start, fb_info.screen_base, default_par.io_virt);
-#endif
displaytype = get_displaytype();
if (flatpanel)
@@ -1288,9 +1311,12 @@
if (!fb_find_mode(&default_var, &fb_info, mode, NULL, 0, NULL, bpp)) {
err = -EINVAL;
- goto out_unmap;
+ goto out_unmap2;
}
- fb_alloc_cmap(&fb_info.cmap, 256, 0);
+ err = fb_alloc_cmap(&fb_info.cmap, 256, 0);
+ if (err < 0)
+ goto out_unmap2;
+
if (defaultaccel && acc)
default_var.accel_flags |= FB_ACCELF_TEXT;
else
@@ -1300,19 +1326,24 @@
fb_info.device = &dev->dev;
if (register_framebuffer(&fb_info) < 0) {
printk(KERN_ERR "tridentfb: could not register Trident framebuffer\n");
+ fb_dealloc_cmap(&fb_info.cmap);
err = -EINVAL;
- goto out_unmap;
+ goto out_unmap2;
}
output("fb%d: %s frame buffer device %dx%d-%dbpp\n",
fb_info.node, fb_info.fix.id, default_var.xres,
default_var.yres, default_var.bits_per_pixel);
return 0;
-out_unmap:
- if (default_par.io_virt)
- iounmap(default_par.io_virt);
+out_unmap2:
if (fb_info.screen_base)
iounmap(fb_info.screen_base);
+ release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
+ disable_mmio();
+out_unmap1:
+ if (default_par.io_virt)
+ iounmap(default_par.io_virt);
+ release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
return err;
}
@@ -1323,7 +1354,7 @@
iounmap(par->io_virt);
iounmap(fb_info.screen_base);
release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
- release_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
+ release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
}
/* List of boards that we are trying to support */
diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c
index 688e435..10211e4 100644
--- a/drivers/w1/masters/ds1wm.c
+++ b/drivers/w1/masters/ds1wm.c
@@ -17,6 +17,7 @@
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/delay.h>
#include <linux/ds1wm.h>
@@ -102,12 +103,12 @@
static inline void ds1wm_write_register(struct ds1wm_data *ds1wm_data, u32 reg,
u8 val)
{
- __raw_writeb(val, ds1wm_data->map + (reg << ds1wm_data->bus_shift));
+ __raw_writeb(val, ds1wm_data->map + (reg << ds1wm_data->bus_shift));
}
static inline u8 ds1wm_read_register(struct ds1wm_data *ds1wm_data, u32 reg)
{
- return __raw_readb(ds1wm_data->map + (reg << ds1wm_data->bus_shift));
+ return __raw_readb(ds1wm_data->map + (reg << ds1wm_data->bus_shift));
}
@@ -149,8 +150,8 @@
timeleft = wait_for_completion_timeout(&reset_done, DS1WM_TIMEOUT);
ds1wm_data->reset_complete = NULL;
if (!timeleft) {
- dev_dbg(&ds1wm_data->pdev->dev, "reset failed\n");
- return 1;
+ dev_err(&ds1wm_data->pdev->dev, "reset failed\n");
+ return 1;
}
/* Wait for the end of the reset. According to the specs, the time
@@ -167,11 +168,11 @@
(ds1wm_data->active_high ? DS1WM_INTEN_IAS : 0));
if (!ds1wm_data->slave_present) {
- dev_dbg(&ds1wm_data->pdev->dev, "reset: no devices found\n");
- return 1;
- }
+ dev_dbg(&ds1wm_data->pdev->dev, "reset: no devices found\n");
+ return 1;
+ }
- return 0;
+ return 0;
}
static int ds1wm_write(struct ds1wm_data *ds1wm_data, u8 data)
@@ -334,7 +335,7 @@
if (!pdev)
return -ENODEV;
- ds1wm_data = kzalloc(sizeof (*ds1wm_data), GFP_KERNEL);
+ ds1wm_data = kzalloc(sizeof(*ds1wm_data), GFP_KERNEL);
if (!ds1wm_data)
return -ENOMEM;
@@ -374,8 +375,8 @@
goto err1;
ds1wm_data->clk = clk_get(&pdev->dev, "ds1wm");
- if (!ds1wm_data->clk) {
- ret = -ENOENT;
+ if (IS_ERR(ds1wm_data->clk)) {
+ ret = PTR_ERR(ds1wm_data->clk);
goto err2;
}
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 41a958a..5e1a4fb 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1424,6 +1424,18 @@
int thread_notes;
};
+/*
+ * When a regset has a writeback hook, we call it on each thread before
+ * dumping user memory. On register window machines, this makes sure the
+ * user memory backing the register data is up to date before we read it.
+ */
+static void do_thread_regset_writeback(struct task_struct *task,
+ const struct user_regset *regset)
+{
+ if (regset->writeback)
+ regset->writeback(task, regset, 1);
+}
+
static int fill_thread_core_info(struct elf_thread_core_info *t,
const struct user_regset_view *view,
long signr, size_t *total)
@@ -1445,6 +1457,8 @@
sizeof(t->prstatus), &t->prstatus);
*total += notesize(&t->notes[0]);
+ do_thread_regset_writeback(t->task, &view->regsets[0]);
+
/*
* Each other regset might generate a note too. For each regset
* that has no core_note_type or is inactive, we leave t->notes[i]
@@ -1452,6 +1466,7 @@
*/
for (i = 1; i < view->n; ++i) {
const struct user_regset *regset = &view->regsets[i];
+ do_thread_regset_writeback(t->task, regset);
if (regset->core_note_type &&
(!regset->active || regset->active(t->task, regset))) {
int ret;
diff --git a/fs/buffer.c b/fs/buffer.c
index 897cd74..ddfdd2c 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -835,7 +835,7 @@
smp_mb();
if (buffer_dirty(bh)) {
list_add(&bh->b_assoc_buffers,
- &bh->b_assoc_map->private_list);
+ &mapping->private_list);
bh->b_assoc_map = mapping;
}
spin_unlock(lock);
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index d26e282..e9602d8 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -29,10 +29,6 @@
#define DEBUGFS_MAGIC 0x64626720
-/* declared over in file.c */
-extern struct file_operations debugfs_file_operations;
-extern struct inode_operations debugfs_link_operations;
-
static struct vfsmount *debugfs_mount;
static int debugfs_mount_count;
diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c
index dc74b18..6df1deb 100644
--- a/fs/ecryptfs/mmap.c
+++ b/fs/ecryptfs/mmap.c
@@ -263,52 +263,102 @@
return 0;
}
-/* This function must zero any hole we create */
+/**
+ * ecryptfs_prepare_write
+ * @file: The eCryptfs file
+ * @page: The eCryptfs page
+ * @from: The start byte from which we will write
+ * @to: The end byte to which we will write
+ *
+ * This function must zero any hole we create
+ *
+ * Returns zero on success; non-zero otherwise
+ */
static int ecryptfs_prepare_write(struct file *file, struct page *page,
unsigned from, unsigned to)
{
- int rc = 0;
loff_t prev_page_end_size;
+ int rc = 0;
if (!PageUptodate(page)) {
- rc = ecryptfs_read_lower_page_segment(page, page->index, 0,
- PAGE_CACHE_SIZE,
- page->mapping->host);
- if (rc) {
- printk(KERN_ERR "%s: Error attemping to read lower "
- "page segment; rc = [%d]\n", __FUNCTION__, rc);
- ClearPageUptodate(page);
- goto out;
- } else
+ struct ecryptfs_crypt_stat *crypt_stat =
+ &ecryptfs_inode_to_private(
+ file->f_path.dentry->d_inode)->crypt_stat;
+
+ if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)
+ || (crypt_stat->flags & ECRYPTFS_NEW_FILE)) {
+ rc = ecryptfs_read_lower_page_segment(
+ page, page->index, 0, PAGE_CACHE_SIZE,
+ page->mapping->host);
+ if (rc) {
+ printk(KERN_ERR "%s: Error attemping to read "
+ "lower page segment; rc = [%d]\n",
+ __FUNCTION__, rc);
+ ClearPageUptodate(page);
+ goto out;
+ } else
+ SetPageUptodate(page);
+ } else if (crypt_stat->flags & ECRYPTFS_VIEW_AS_ENCRYPTED) {
+ if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR) {
+ rc = ecryptfs_copy_up_encrypted_with_header(
+ page, crypt_stat);
+ if (rc) {
+ printk(KERN_ERR "%s: Error attempting "
+ "to copy the encrypted content "
+ "from the lower file whilst "
+ "inserting the metadata from "
+ "the xattr into the header; rc "
+ "= [%d]\n", __FUNCTION__, rc);
+ ClearPageUptodate(page);
+ goto out;
+ }
+ SetPageUptodate(page);
+ } else {
+ rc = ecryptfs_read_lower_page_segment(
+ page, page->index, 0, PAGE_CACHE_SIZE,
+ page->mapping->host);
+ if (rc) {
+ printk(KERN_ERR "%s: Error reading "
+ "page; rc = [%d]\n",
+ __FUNCTION__, rc);
+ ClearPageUptodate(page);
+ goto out;
+ }
+ SetPageUptodate(page);
+ }
+ } else {
+ rc = ecryptfs_decrypt_page(page);
+ if (rc) {
+ printk(KERN_ERR "%s: Error decrypting page "
+ "at index [%ld]; rc = [%d]\n",
+ __FUNCTION__, page->index, rc);
+ ClearPageUptodate(page);
+ goto out;
+ }
SetPageUptodate(page);
+ }
}
-
prev_page_end_size = ((loff_t)page->index << PAGE_CACHE_SHIFT);
-
- /*
- * If creating a page or more of holes, zero them out via truncate.
- * Note, this will increase i_size.
- */
+ /* If creating a page or more of holes, zero them out via truncate.
+ * Note, this will increase i_size. */
if (page->index != 0) {
if (prev_page_end_size > i_size_read(page->mapping->host)) {
rc = ecryptfs_truncate(file->f_path.dentry,
prev_page_end_size);
if (rc) {
- printk(KERN_ERR "Error on attempt to "
+ printk(KERN_ERR "%s: Error on attempt to "
"truncate to (higher) offset [%lld];"
- " rc = [%d]\n", prev_page_end_size, rc);
+ " rc = [%d]\n", __FUNCTION__,
+ prev_page_end_size, rc);
goto out;
}
}
}
- /*
- * Writing to a new page, and creating a small hole from start of page?
- * Zero it out.
- */
- if ((i_size_read(page->mapping->host) == prev_page_end_size) &&
- (from != 0)) {
+ /* Writing to a new page, and creating a small hole from start
+ * of page? Zero it out. */
+ if ((i_size_read(page->mapping->host) == prev_page_end_size)
+ && (from != 0))
zero_user(page, 0, PAGE_CACHE_SIZE);
- }
out:
return rc;
}
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 18769cc..ad53606 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -806,8 +806,8 @@
{Opt_quota, "quota"},
{Opt_usrquota, "usrquota"},
{Opt_barrier, "barrier=%u"},
- {Opt_err, NULL},
{Opt_resize, "resize"},
+ {Opt_err, NULL},
};
static ext3_fsblk_t get_sb_block(void **data)
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 6841452..393cc22c 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -2031,7 +2031,7 @@
return -EXDEV;
}
/* We must not pack tails for quota files on reiserfs for quota IO to work */
- if (!REISERFS_I(nd.path.dentry->d_inode)->i_flags & i_nopack_mask) {
+ if (!(REISERFS_I(nd.path.dentry->d_inode)->i_flags & i_nopack_mask)) {
reiserfs_warning(sb,
"reiserfs: Quota file must have tail packing disabled.");
path_put(&nd.path);
diff --git a/include/asm-arm/kprobes.h b/include/asm-arm/kprobes.h
index 4e7bd32..c042194 100644
--- a/include/asm-arm/kprobes.h
+++ b/include/asm-arm/kprobes.h
@@ -20,7 +20,6 @@
#include <linux/ptrace.h>
#include <linux/percpu.h>
-#define ARCH_SUPPORTS_KRETPROBES
#define __ARCH_WANT_KPROBES_INSN_SLOT
#define MAX_INSN_SIZE 2
#define MAX_STACK_SIZE 64 /* 32 would probably be OK */
diff --git a/include/asm-cris/uaccess.h b/include/asm-cris/uaccess.h
index 69d48a2..ea11eaf 100644
--- a/include/asm-cris/uaccess.h
+++ b/include/asm-cris/uaccess.h
@@ -1,43 +1,6 @@
/*
* Authors: Bjorn Wesen (bjornw@axis.com)
* Hans-Peter Nilsson (hp@axis.com)
- *
- * $Log: uaccess.h,v $
- * Revision 1.8 2001/10/29 13:01:48 bjornw
- * Removed unused variable tmp2 in strnlen_user
- *
- * Revision 1.7 2001/10/02 12:44:52 hp
- * Add support for 64-bit put_user/get_user
- *
- * Revision 1.6 2001/10/01 14:51:17 bjornw
- * Added register prefixes and removed underscores
- *
- * Revision 1.5 2000/10/25 03:33:21 hp
- * - Provide implementation for everything else but get_user and put_user;
- * copying inline to/from user for constant length 0..16, 20, 24, and
- * clearing for 0..4, 8, 12, 16, 20, 24, strncpy_from_user and strnlen_user
- * always inline.
- * - Constraints for destination addr in get_user cannot be memory, only reg.
- * - Correct labels for PC at expected fault points.
- * - Nits with assembly code.
- * - Don't use statement expressions without value; use "do {} while (0)".
- * - Return correct values from __generic_... functions.
- *
- * Revision 1.4 2000/09/12 16:28:25 bjornw
- * * Removed comments from the get/put user asm code
- * * Constrains for destination addr in put_user cannot be memory, only reg
- *
- * Revision 1.3 2000/09/12 14:30:20 bjornw
- * MAX_ADDR_USER does not exist anymore
- *
- * Revision 1.2 2000/07/13 15:52:48 bjornw
- * New user-access functions
- *
- * Revision 1.1.1.1 2000/07/10 16:32:31 bjornw
- * CRIS architecture, working draft
- *
- *
- *
*/
/* Asm:s have been tweaked (within the domain of correctness) to give
@@ -209,9 +172,9 @@
/* More complex functions. Most are inline, but some call functions that
live in lib/usercopy.c */
-extern unsigned long __copy_user(void *to, const void *from, unsigned long n);
-extern unsigned long __copy_user_zeroing(void *to, const void *from, unsigned long n);
-extern unsigned long __do_clear_user(void *to, unsigned long n);
+extern unsigned long __copy_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __copy_user_zeroing(void *to, const void __user *from, unsigned long n);
+extern unsigned long __do_clear_user(void __user *to, unsigned long n);
static inline unsigned long
__generic_copy_to_user(void __user *to, const void *from, unsigned long n)
@@ -253,7 +216,7 @@
}
-/* Note that if these expand awfully if made into switch constructs, so
+/* Note that these expand awfully if made into switch constructs, so
don't do that. */
static inline unsigned long
@@ -407,19 +370,21 @@
*/
static inline unsigned long
-__generic_copy_from_user_nocheck(void *to, const void *from, unsigned long n)
+__generic_copy_from_user_nocheck(void *to, const void __user *from,
+ unsigned long n)
{
return __copy_user_zeroing(to,from,n);
}
static inline unsigned long
-__generic_copy_to_user_nocheck(void *to, const void *from, unsigned long n)
+__generic_copy_to_user_nocheck(void __user *to, const void *from,
+ unsigned long n)
{
return __copy_user(to,from,n);
}
static inline unsigned long
-__generic_clear_user_nocheck(void *to, unsigned long n)
+__generic_clear_user_nocheck(void __user *to, unsigned long n)
{
return __do_clear_user(to,n);
}
diff --git a/include/asm-cris/unistd.h b/include/asm-cris/unistd.h
index 007cb16a..76398ef 100644
--- a/include/asm-cris/unistd.h
+++ b/include/asm-cris/unistd.h
@@ -329,12 +329,12 @@
#define __NR_timerfd_create 322
#define __NR_eventfd 323
#define __NR_fallocate 324
-#define __NR_timerfd_settime 315
-#define __NR_timerfd_gettime 316
+#define __NR_timerfd_settime 325
+#define __NR_timerfd_gettime 326
#ifdef __KERNEL__
-#define NR_syscalls 325
+#define NR_syscalls 327
#include <asm/arch/unistd.h>
diff --git a/include/asm-ia64/kprobes.h b/include/asm-ia64/kprobes.h
index 49684b6..8233b3a 100644
--- a/include/asm-ia64/kprobes.h
+++ b/include/asm-ia64/kprobes.h
@@ -82,7 +82,6 @@
struct prev_kprobe prev_kprobe[ARCH_PREV_KPROBE_SZ];
};
-#define ARCH_SUPPORTS_KRETPROBES
#define kretprobe_blacklist_size 0
#define SLOT0_OPCODE_SHIFT (37)
diff --git a/include/asm-powerpc/kprobes.h b/include/asm-powerpc/kprobes.h
index afabad2..d0e7701 100644
--- a/include/asm-powerpc/kprobes.h
+++ b/include/asm-powerpc/kprobes.h
@@ -80,7 +80,6 @@
#define is_trap(instr) (IS_TW(instr) || IS_TWI(instr))
#endif
-#define ARCH_SUPPORTS_KRETPROBES
#define flush_insn_slot(p) do { } while (0)
#define kretprobe_blacklist_size 0
diff --git a/include/asm-s390/kprobes.h b/include/asm-s390/kprobes.h
index 948db3d..330f68c 100644
--- a/include/asm-s390/kprobes.h
+++ b/include/asm-s390/kprobes.h
@@ -46,7 +46,6 @@
? (MAX_STACK_SIZE) \
: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
-#define ARCH_SUPPORTS_KRETPROBES
#define kretprobe_blacklist_size 0
#define KPROBE_SWAP_INST 0x10
diff --git a/include/asm-sparc64/kprobes.h b/include/asm-sparc64/kprobes.h
index 7237dd8..5879d71 100644
--- a/include/asm-sparc64/kprobes.h
+++ b/include/asm-sparc64/kprobes.h
@@ -14,8 +14,6 @@
#define arch_remove_kprobe(p) do {} while (0)
-#define ARCH_SUPPORTS_KRETPROBES
-
#define flush_insn_slot(p) \
do { flushi(&(p)->ainsn.insn[0]); \
flushi(&(p)->ainsn.insn[1]); \
diff --git a/include/asm-x86/kprobes.h b/include/asm-x86/kprobes.h
index 143476a..61ad7b5 100644
--- a/include/asm-x86/kprobes.h
+++ b/include/asm-x86/kprobes.h
@@ -42,7 +42,6 @@
: (((unsigned long)current_thread_info()) + THREAD_SIZE \
- (unsigned long)(ADDR)))
-#define ARCH_SUPPORTS_KRETPROBES
#define flush_insn_slot(p) do { } while (0)
extern const int kretprobe_blacklist_size;
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index aada32f..994df37 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -61,6 +61,7 @@
header-y += elf-fdpic.h
header-y += elf-em.h
header-y += fadvise.h
+header-y += falloc.h
header-y += fd.h
header-y += fdreg.h
header-y += fib_rules.h
diff --git a/include/linux/cgroup_subsys.h b/include/linux/cgroup_subsys.h
index ac6aad9..1ddebfc 100644
--- a/include/linux/cgroup_subsys.h
+++ b/include/linux/cgroup_subsys.h
@@ -37,7 +37,7 @@
/* */
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
SUBSYS(mem_cgroup)
#endif
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index d0e17e1..dcae0c8 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -138,6 +138,12 @@
#define noinline
#endif
+/*
+ * Rather then using noinline to prevent stack consumption, use
+ * noinline_for_stack instead. For documentaiton reasons.
+ */
+#define noinline_for_stack noinline
+
#ifndef __always_inline
#define __always_inline inline
#endif
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index f592d6d..7266124 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -27,6 +27,11 @@
};
#if defined(CONFIG_DEBUG_FS)
+
+/* declared over in file.c */
+extern const struct file_operations debugfs_file_operations;
+extern const struct inode_operations debugfs_link_operations;
+
struct dentry *debugfs_create_file(const char *name, mode_t mode,
struct dentry *parent, void *data,
const struct file_operations *fops);
diff --git a/include/linux/delay.h b/include/linux/delay.h
index 17ddb55..54552d2 100644
--- a/include/linux/delay.h
+++ b/include/linux/delay.h
@@ -7,6 +7,8 @@
* Delay routines, using a pre-computed "loops_per_jiffy" value.
*/
+#include <linux/kernel.h>
+
extern unsigned long loops_per_jiffy;
#include <asm/delay.h>
@@ -32,7 +34,11 @@
#endif
#ifndef ndelay
-#define ndelay(x) udelay(((x)+999)/1000)
+static inline void ndelay(unsigned long x)
+{
+ udelay(DIV_ROUND_UP(x, 1000));
+}
+#define ndelay(x) ndelay(x)
#endif
void calibrate_delay(void);
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
new file mode 100644
index 0000000..4987a84
--- /dev/null
+++ b/include/linux/gpio.h
@@ -0,0 +1,95 @@
+#ifndef __LINUX_GPIO_H
+#define __LINUX_GPIO_H
+
+/* see Documentation/gpio.txt */
+
+#ifdef CONFIG_GENERIC_GPIO
+#include <asm/gpio.h>
+
+#else
+
+/*
+ * Some platforms don't support the GPIO programming interface.
+ *
+ * In case some driver uses it anyway (it should normally have
+ * depended on GENERIC_GPIO), these routines help the compiler
+ * optimize out much GPIO-related code ... or trigger a runtime
+ * warning when something is wrongly called.
+ */
+
+static inline int gpio_is_valid(int number)
+{
+ return 0;
+}
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ return -ENOSYS;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ return -ENOSYS;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ return -ENOSYS;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ /* GPIO can never have been requested or set as {in,out}put */
+ WARN_ON(1);
+ return 0;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ /* GPIO can never have been requested or set as output */
+ WARN_ON(1);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ /* GPIO can never have been requested or set as {in,out}put */
+ WARN_ON(1);
+ return 0;
+}
+
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+ /* GPIO can never have been requested or set as {in,out}put */
+ WARN_ON(1);
+ return 0;
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+ /* GPIO can never have been requested or set as output */
+ WARN_ON(1);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ /* GPIO can never have been requested or set as input */
+ WARN_ON(1);
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ /* irq can never have been returned from gpio_to_irq() */
+ WARN_ON(1);
+ return -EINVAL;
+}
+
+#endif
+
+#endif /* __LINUX_GPIO_H */
diff --git a/include/linux/iommu-helper.h b/include/linux/iommu-helper.h
index 4dd4c04..c975caf 100644
--- a/include/linux/iommu-helper.h
+++ b/include/linux/iommu-helper.h
@@ -1,3 +1,6 @@
+extern int iommu_is_span_boundary(unsigned int index, unsigned int nr,
+ unsigned long shift,
+ unsigned long boundary_size);
extern unsigned long iommu_area_alloc(unsigned long *map, unsigned long size,
unsigned long start, unsigned int nr,
unsigned long shift,
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index 4a6ce82..0f28486 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -125,11 +125,11 @@
DECLARE_PER_CPU(struct kprobe *, current_kprobe);
DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
-#ifdef ARCH_SUPPORTS_KRETPROBES
+#ifdef CONFIG_KRETPROBES
extern void arch_prepare_kretprobe(struct kretprobe_instance *ri,
struct pt_regs *regs);
extern int arch_trampoline_kprobe(struct kprobe *p);
-#else /* ARCH_SUPPORTS_KRETPROBES */
+#else /* CONFIG_KRETPROBES */
static inline void arch_prepare_kretprobe(struct kretprobe *rp,
struct pt_regs *regs)
{
@@ -138,7 +138,7 @@
{
return 0;
}
-#endif /* ARCH_SUPPORTS_KRETPROBES */
+#endif /* CONFIG_KRETPROBES */
/*
* Function-return probe -
* Note:
diff --git a/include/linux/marker.h b/include/linux/marker.h
index 5df879d..430f6ad 100644
--- a/include/linux/marker.h
+++ b/include/linux/marker.h
@@ -104,10 +104,16 @@
#define MARK_NOARGS " "
/* To be used for string format validity checking with gcc */
-static inline void __printf(1, 2) __mark_check_format(const char *fmt, ...)
+static inline void __printf(1, 2) ___mark_check_format(const char *fmt, ...)
{
}
+#define __mark_check_format(format, args...) \
+ do { \
+ if (0) \
+ ___mark_check_format(format, ## args); \
+ } while (0)
+
extern marker_probe_func __mark_empty_function;
extern void marker_probe_cb(const struct marker *mdata,
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 0407562..8b1c429 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -25,18 +25,20 @@
struct page;
struct mm_struct;
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
extern void mm_init_cgroup(struct mm_struct *mm, struct task_struct *p);
extern void mm_free_cgroup(struct mm_struct *mm);
-extern void page_assign_page_cgroup(struct page *page,
- struct page_cgroup *pc);
+
+#define page_reset_bad_cgroup(page) ((page)->page_cgroup = 0)
+
extern struct page_cgroup *page_get_page_cgroup(struct page *page);
extern int mem_cgroup_charge(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask);
-extern void mem_cgroup_uncharge(struct page_cgroup *pc);
+extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
+ gfp_t gfp_mask);
extern void mem_cgroup_uncharge_page(struct page *page);
-extern void mem_cgroup_move_lists(struct page_cgroup *pc, bool active);
+extern void mem_cgroup_move_lists(struct page *page, bool active);
extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
struct list_head *dst,
unsigned long *scanned, int order,
@@ -44,11 +46,9 @@
struct mem_cgroup *mem_cont,
int active);
extern void mem_cgroup_out_of_memory(struct mem_cgroup *mem, gfp_t gfp_mask);
-extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
- gfp_t gfp_mask);
int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *mem);
-#define vm_match_cgroup(mm, cgroup) \
+#define mm_match_cgroup(mm, cgroup) \
((cgroup) == rcu_dereference((mm)->mem_cgroup))
extern int mem_cgroup_prepare_migration(struct page *page);
@@ -72,7 +72,7 @@
extern long mem_cgroup_calc_reclaim_inactive(struct mem_cgroup *mem,
struct zone *zone, int priority);
-#else /* CONFIG_CGROUP_MEM_CONT */
+#else /* CONFIG_CGROUP_MEM_RES_CTLR */
static inline void mm_init_cgroup(struct mm_struct *mm,
struct task_struct *p)
{
@@ -82,8 +82,7 @@
{
}
-static inline void page_assign_page_cgroup(struct page *page,
- struct page_cgroup *pc)
+static inline void page_reset_bad_cgroup(struct page *page)
{
}
@@ -92,33 +91,27 @@
return NULL;
}
-static inline int mem_cgroup_charge(struct page *page, struct mm_struct *mm,
- gfp_t gfp_mask)
+static inline int mem_cgroup_charge(struct page *page,
+ struct mm_struct *mm, gfp_t gfp_mask)
{
return 0;
}
-static inline void mem_cgroup_uncharge(struct page_cgroup *pc)
+static inline int mem_cgroup_cache_charge(struct page *page,
+ struct mm_struct *mm, gfp_t gfp_mask)
{
+ return 0;
}
static inline void mem_cgroup_uncharge_page(struct page *page)
{
}
-static inline void mem_cgroup_move_lists(struct page_cgroup *pc,
- bool active)
+static inline void mem_cgroup_move_lists(struct page *page, bool active)
{
}
-static inline int mem_cgroup_cache_charge(struct page *page,
- struct mm_struct *mm,
- gfp_t gfp_mask)
-{
- return 0;
-}
-
-static inline int vm_match_cgroup(struct mm_struct *mm, struct mem_cgroup *mem)
+static inline int mm_match_cgroup(struct mm_struct *mm, struct mem_cgroup *mem)
{
return 1;
}
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 34023c6..af190ce 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -88,7 +88,7 @@
void *virtual; /* Kernel virtual address (NULL if
not kmapped, ie. highmem) */
#endif /* WANT_PAGE_VIRTUAL */
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
unsigned long page_cgroup;
#endif
};
@@ -222,7 +222,7 @@
/* aio bits */
rwlock_t ioctx_list_lock;
struct kioctx *ioctx_list;
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
struct mem_cgroup *mem_cgroup;
#endif
};
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 87195b6..f3165e7 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -389,6 +389,16 @@
#define to_pci_driver(drv) container_of(drv, struct pci_driver, driver)
/**
+ * DECLARE_PCI_DEVICE_TABLE - macro used to describe a pci device table
+ * @_table: device table name
+ *
+ * This macro is used to create a struct pci_device_id array (a device table)
+ * in a generic manner.
+ */
+#define DECLARE_PCI_DEVICE_TABLE(_table) \
+ const struct pci_device_id _table[] __devinitconst
+
+/**
* PCI_DEVICE - macro used to describe a specific pci device
* @vend: the 16 bit PCI Vendor ID
* @dev: the 16 bit PCI Device ID
diff --git a/include/linux/raid/bitmap.h b/include/linux/raid/bitmap.h
index e51b531..47fbcba 100644
--- a/include/linux/raid/bitmap.h
+++ b/include/linux/raid/bitmap.h
@@ -235,6 +235,8 @@
unsigned long flags;
+ int allclean;
+
unsigned long max_write_behind; /* write-behind mode */
atomic_t behind_writes;
diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h
index 85a068b..7bb6d1a 100644
--- a/include/linux/raid/md_k.h
+++ b/include/linux/raid/md_k.h
@@ -83,6 +83,7 @@
#define BarriersNotsupp 5 /* BIO_RW_BARRIER is not supported */
#define AllReserved 6 /* If whole device is reserved for
* one array */
+#define AutoDetected 7 /* added by auto-detect */
int desc_nr; /* descriptor index in the superblock */
int raid_disk; /* role of device in array */
diff --git a/include/linux/sm501-regs.h b/include/linux/sm501-regs.h
index 64236b7..d53642d 100644
--- a/include/linux/sm501-regs.h
+++ b/include/linux/sm501-regs.h
@@ -129,11 +129,14 @@
#define SM501_DEVICEID_SM501 (0x05010000)
#define SM501_DEVICEID_IDMASK (0xffff0000)
+#define SM501_DEVICEID_REVMASK (0x000000ff)
#define SM501_PLLCLOCK_COUNT (0x000064)
#define SM501_MISC_TIMING (0x000068)
#define SM501_CURRENT_SDRAM_CLOCK (0x00006C)
+#define SM501_PROGRAMMABLE_PLL_CONTROL (0x000074)
+
/* GPIO base */
#define SM501_GPIO (0x010000)
#define SM501_GPIO_DATA_LOW (0x00)
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
index 932a9ef..bca1345 100644
--- a/include/linux/sm501.h
+++ b/include/linux/sm501.h
@@ -24,7 +24,8 @@
extern unsigned long sm501_set_clock(struct device *dev,
int clksrc, unsigned long freq);
-extern unsigned long sm501_find_clock(int clksrc, unsigned long req_freq);
+extern unsigned long sm501_find_clock(struct device *dev,
+ int clksrc, unsigned long req_freq);
/* sm501_misc_control
*
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 5bd3ae8a..583e048 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -94,10 +94,9 @@
* @altsetting: array of interface structures, one for each alternate
* setting that may be selected. Each one includes a set of
* endpoint configurations. They will be in no particular order.
- * @num_altsetting: number of altsettings defined.
* @cur_altsetting: the current altsetting.
+ * @num_altsetting: number of altsettings defined.
* @intf_assoc: interface association descriptor
- * @driver: the USB driver that is bound to this interface.
* @minor: the minor number assigned to this interface, if this
* interface is bound to a driver that uses the USB major number.
* If this interface does not use the USB major, this field should
diff --git a/init/Kconfig b/init/Kconfig
index f698a5a..074ac97 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -366,10 +366,29 @@
infrastructure that works with cgroups
depends on CGROUPS
+config CGROUP_MEM_RES_CTLR
+ bool "Memory Resource Controller for Control Groups"
+ depends on CGROUPS && RESOURCE_COUNTERS
+ help
+ Provides a memory resource controller that manages both page cache and
+ RSS memory.
+
+ Note that setting this option increases fixed memory overhead
+ associated with each page of memory in the system by 4/8 bytes
+ and also increases cache misses because struct page on many 64bit
+ systems will not fit into a single cache line anymore.
+
+ Only enable when you're ok with these trade offs and really
+ sure you need the memory resource controller.
+
config SYSFS_DEPRECATED
+ bool
+
+config SYSFS_DEPRECATED_V2
bool "Create deprecated sysfs files"
depends on SYSFS
default y
+ select SYSFS_DEPRECATED
help
This option creates deprecated symlinks such as the
"device"-link, the <subsystem>:<name>-link, and the
@@ -382,25 +401,11 @@
If enabled, this option will also move any device structures
that belong to a class, back into the /sys/class hierarchy, in
- order to support older versions of udev.
+ order to support older versions of udev and some userspace
+ programs.
- If you are using a distro that was released in 2006 or later,
- it should be safe to say N here.
-
-config CGROUP_MEM_CONT
- bool "Memory controller for cgroups"
- depends on CGROUPS && RESOURCE_COUNTERS
- help
- Provides a memory controller that manages both page cache and
- RSS memory.
-
- Note that setting this option increases fixed memory overhead
- associated with each page of memory in the system by 4/8 bytes
- and also increases cache misses because struct page on many 64bit
- systems will not fit into a single cache line anymore.
-
- Only enable when you're ok with these trade offs and really
- sure you need the memory controller.
+ If you are using a distro with the most recent userspace
+ packages, it should be safe to say N here.
config PROC_PID_CPUSET
bool "Include legacy /proc/<pid>/cpuset file"
diff --git a/init/main.c b/init/main.c
index 8b19820..fbb0167 100644
--- a/init/main.c
+++ b/init/main.c
@@ -254,7 +254,7 @@
static int __init loglevel(char *str)
{
get_option(&str, &console_loglevel);
- return 1;
+ return 0;
}
early_param("loglevel", loglevel);
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index d8abe99..e9c2fb0 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2232,7 +2232,6 @@
mutex_lock(&cgroup_mutex);
- cgrp->flags = 0;
INIT_LIST_HEAD(&cgrp->sibling);
INIT_LIST_HEAD(&cgrp->children);
INIT_LIST_HEAD(&cgrp->css_sets);
@@ -2242,6 +2241,9 @@
cgrp->root = parent->root;
cgrp->top_cgroup = parent->top_cgroup;
+ if (notify_on_release(parent))
+ set_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
+
for_each_subsys(root, ss) {
struct cgroup_subsys_state *css = ss->create(ss, cgrp);
if (IS_ERR(css)) {
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 7a86e64..fcfb580 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -498,27 +498,36 @@
return 0;
}
+/*
+ * If we have a symbol_name argument, look it up and add the offset field
+ * to it. This way, we can specify a relative address to a symbol.
+ */
+static kprobe_opcode_t __kprobes *kprobe_addr(struct kprobe *p)
+{
+ kprobe_opcode_t *addr = p->addr;
+ if (p->symbol_name) {
+ if (addr)
+ return NULL;
+ kprobe_lookup_name(p->symbol_name, addr);
+ }
+
+ if (!addr)
+ return NULL;
+ return (kprobe_opcode_t *)(((char *)addr) + p->offset);
+}
+
static int __kprobes __register_kprobe(struct kprobe *p,
unsigned long called_from)
{
int ret = 0;
struct kprobe *old_p;
struct module *probed_mod;
+ kprobe_opcode_t *addr;
- /*
- * If we have a symbol_name argument look it up,
- * and add it to the address. That way the addr
- * field can either be global or relative to a symbol.
- */
- if (p->symbol_name) {
- if (p->addr)
- return -EINVAL;
- kprobe_lookup_name(p->symbol_name, p->addr);
- }
-
- if (!p->addr)
+ addr = kprobe_addr(p);
+ if (!addr)
return -EINVAL;
- p->addr = (kprobe_opcode_t *)(((char *)p->addr)+ p->offset);
+ p->addr = addr;
if (!kernel_text_address((unsigned long) p->addr) ||
in_kprobes_functions((unsigned long) p->addr))
@@ -678,8 +687,7 @@
unregister_kprobe(&jp->kp);
}
-#ifdef ARCH_SUPPORTS_KRETPROBES
-
+#ifdef CONFIG_KRETPROBES
/*
* This kprobe pre_handler is registered with every kretprobe. When probe
* hits it will set up the return probe.
@@ -722,12 +730,12 @@
int ret = 0;
struct kretprobe_instance *inst;
int i;
- void *addr = rp->kp.addr;
+ void *addr;
if (kretprobe_blacklist_size) {
- if (addr == NULL)
- kprobe_lookup_name(rp->kp.symbol_name, addr);
- addr += rp->kp.offset;
+ addr = kprobe_addr(&rp->kp);
+ if (!addr)
+ return -EINVAL;
for (i = 0; kretprobe_blacklist[i].name != NULL; i++) {
if (kretprobe_blacklist[i].addr == addr)
@@ -769,8 +777,7 @@
return ret;
}
-#else /* ARCH_SUPPORTS_KRETPROBES */
-
+#else /* CONFIG_KRETPROBES */
int __kprobes register_kretprobe(struct kretprobe *rp)
{
return -ENOSYS;
@@ -781,8 +788,7 @@
{
return 0;
}
-
-#endif /* ARCH_SUPPORTS_KRETPROBES */
+#endif /* CONFIG_KRETPROBES */
void __kprobes unregister_kretprobe(struct kretprobe *rp)
{
diff --git a/kernel/marker.c b/kernel/marker.c
index 50effc0..48a4ea5a 100644
--- a/kernel/marker.c
+++ b/kernel/marker.c
@@ -698,14 +698,12 @@
{
struct marker_entry *entry;
struct marker_probe_closure *old;
- int ret = 0;
+ int ret = -ENOENT;
mutex_lock(&markers_mutex);
entry = get_marker(name);
- if (!entry) {
- ret = -ENOENT;
+ if (!entry)
goto end;
- }
if (entry->rcu_pending)
rcu_barrier();
old = marker_entry_remove_probe(entry, probe, probe_private);
@@ -713,12 +711,15 @@
marker_update_probes(); /* may update entry */
mutex_lock(&markers_mutex);
entry = get_marker(name);
+ if (!entry)
+ goto end;
entry->oldptr = old;
entry->rcu_pending = 1;
/* write rcu_pending before calling the RCU callback */
smp_wmb();
call_rcu(&entry->rcu, free_old_closure);
remove_marker(name); /* Ignore busy error message */
+ ret = 0;
end:
mutex_unlock(&markers_mutex);
return ret;
diff --git a/kernel/res_counter.c b/kernel/res_counter.c
index 16cbec2..efbfc0f 100644
--- a/kernel/res_counter.c
+++ b/kernel/res_counter.c
@@ -113,6 +113,7 @@
ret = -EINVAL;
+ strstrip(buf);
if (write_strategy) {
if (write_strategy(buf, &tmp)) {
goto out_free;
diff --git a/lib/iommu-helper.c b/lib/iommu-helper.c
index 495575a..a3b8d4c 100644
--- a/lib/iommu-helper.c
+++ b/lib/iommu-helper.c
@@ -40,10 +40,12 @@
}
}
-static inline int is_span_boundary(unsigned int index, unsigned int nr,
- unsigned long shift,
- unsigned long boundary_size)
+int iommu_is_span_boundary(unsigned int index, unsigned int nr,
+ unsigned long shift,
+ unsigned long boundary_size)
{
+ BUG_ON(!is_power_of_2(boundary_size));
+
shift = (shift + index) & (boundary_size - 1);
return shift + nr > boundary_size;
}
@@ -57,7 +59,7 @@
again:
index = find_next_zero_area(map, size, start, nr, align_mask);
if (index != -1) {
- if (is_span_boundary(index, nr, shift, boundary_size)) {
+ if (iommu_is_span_boundary(index, nr, shift, boundary_size)) {
/* we could do more effectively */
start = index + 1;
goto again;
diff --git a/lib/kobject.c b/lib/kobject.c
index d784dae..0d03252 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -153,6 +153,10 @@
return;
kref_init(&kobj->kref);
INIT_LIST_HEAD(&kobj->entry);
+ kobj->state_in_sysfs = 0;
+ kobj->state_add_uevent_sent = 0;
+ kobj->state_remove_uevent_sent = 0;
+ kobj->state_initialized = 1;
}
@@ -289,13 +293,8 @@
dump_stack();
}
- kref_init(&kobj->kref);
- INIT_LIST_HEAD(&kobj->entry);
+ kobject_init_internal(kobj);
kobj->ktype = ktype;
- kobj->state_in_sysfs = 0;
- kobj->state_add_uevent_sent = 0;
- kobj->state_remove_uevent_sent = 0;
- kobj->state_initialized = 1;
return;
error:
diff --git a/mm/Makefile b/mm/Makefile
index 9f117ba..a5b0dd9 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -32,5 +32,5 @@
obj-$(CONFIG_MIGRATION) += migrate.o
obj-$(CONFIG_SMP) += allocpercpu.o
obj-$(CONFIG_QUICKLIST) += quicklist.o
-obj-$(CONFIG_CGROUP_MEM_CONT) += memcontrol.o
+obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o
diff --git a/mm/allocpercpu.c b/mm/allocpercpu.c
index 7e58322..b0012e2 100644
--- a/mm/allocpercpu.c
+++ b/mm/allocpercpu.c
@@ -6,6 +6,10 @@
#include <linux/mm.h>
#include <linux/module.h>
+#ifndef cache_line_size
+#define cache_line_size() L1_CACHE_BYTES
+#endif
+
/**
* percpu_depopulate - depopulate per-cpu data for given cpu
* @__pdata: per-cpu data to depopulate
@@ -52,6 +56,11 @@
struct percpu_data *pdata = __percpu_disguise(__pdata);
int node = cpu_to_node(cpu);
+ /*
+ * We should make sure each CPU gets private memory.
+ */
+ size = roundup(size, cache_line_size());
+
BUG_ON(pdata->ptrs[cpu]);
if (node_online(node))
pdata->ptrs[cpu] = kmalloc_node(size, gfp|__GFP_ZERO, node);
@@ -98,7 +107,11 @@
*/
void *__percpu_alloc_mask(size_t size, gfp_t gfp, cpumask_t *mask)
{
- void *pdata = kzalloc(nr_cpu_ids * sizeof(void *), gfp);
+ /*
+ * We allocate whole cache lines to avoid false sharing
+ */
+ size_t sz = roundup(nr_cpu_ids * sizeof(void *), cache_line_size());
+ void *pdata = kzalloc(sz, gfp);
void *__pdata = __percpu_disguise(pdata);
if (unlikely(!pdata))
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 89e6286..dcacc81 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -71,7 +71,25 @@
free_huge_pages_node[nid]++;
}
-static struct page *dequeue_huge_page(struct vm_area_struct *vma,
+static struct page *dequeue_huge_page(void)
+{
+ int nid;
+ struct page *page = NULL;
+
+ for (nid = 0; nid < MAX_NUMNODES; ++nid) {
+ if (!list_empty(&hugepage_freelists[nid])) {
+ page = list_entry(hugepage_freelists[nid].next,
+ struct page, lru);
+ list_del(&page->lru);
+ free_huge_pages--;
+ free_huge_pages_node[nid]--;
+ break;
+ }
+ }
+ return page;
+}
+
+static struct page *dequeue_huge_page_vma(struct vm_area_struct *vma,
unsigned long address)
{
int nid;
@@ -296,8 +314,10 @@
int needed, allocated;
needed = (resv_huge_pages + delta) - free_huge_pages;
- if (needed <= 0)
+ if (needed <= 0) {
+ resv_huge_pages += delta;
return 0;
+ }
allocated = 0;
INIT_LIST_HEAD(&surplus_list);
@@ -335,9 +355,12 @@
* The surplus_list now contains _at_least_ the number of extra pages
* needed to accomodate the reservation. Add the appropriate number
* of pages to the hugetlb pool and free the extras back to the buddy
- * allocator.
+ * allocator. Commit the entire reservation here to prevent another
+ * process from stealing the pages as they are added to the pool but
+ * before they are reserved.
*/
needed += allocated;
+ resv_huge_pages += delta;
ret = 0;
free:
list_for_each_entry_safe(page, tmp, &surplus_list, lru) {
@@ -371,6 +394,9 @@
struct page *page;
unsigned long nr_pages;
+ /* Uncommit the reservation */
+ resv_huge_pages -= unused_resv_pages;
+
nr_pages = min(unused_resv_pages, surplus_huge_pages);
while (nr_pages) {
@@ -402,7 +428,7 @@
struct page *page;
spin_lock(&hugetlb_lock);
- page = dequeue_huge_page(vma, addr);
+ page = dequeue_huge_page_vma(vma, addr);
spin_unlock(&hugetlb_lock);
return page ? page : ERR_PTR(-VM_FAULT_OOM);
}
@@ -417,7 +443,7 @@
spin_lock(&hugetlb_lock);
if (free_huge_pages > resv_huge_pages)
- page = dequeue_huge_page(vma, addr);
+ page = dequeue_huge_page_vma(vma, addr);
spin_unlock(&hugetlb_lock);
if (!page) {
page = alloc_buddy_huge_page(vma, addr);
@@ -570,7 +596,7 @@
min_count = max(count, min_count);
try_to_free_low(min_count);
while (min_count < persistent_huge_pages) {
- struct page *page = dequeue_huge_page(NULL, 0);
+ struct page *page = dequeue_huge_page();
if (!page)
break;
update_and_free_page(page);
@@ -1205,12 +1231,13 @@
if (gather_surplus_pages(delta) < 0)
goto out;
- if (delta > cpuset_mems_nr(free_huge_pages_node))
+ if (delta > cpuset_mems_nr(free_huge_pages_node)) {
+ return_unused_surplus_pages(delta);
goto out;
+ }
}
ret = 0;
- resv_huge_pages += delta;
if (delta < 0)
return_unused_surplus_pages((unsigned long) -delta);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 631002d..8b9f6ca 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -137,14 +137,21 @@
*/
struct mem_cgroup_stat stat;
};
+static struct mem_cgroup init_mem_cgroup;
/*
* We use the lower bit of the page->page_cgroup pointer as a bit spin
- * lock. We need to ensure that page->page_cgroup is atleast two
- * byte aligned (based on comments from Nick Piggin)
+ * lock. We need to ensure that page->page_cgroup is at least two
+ * byte aligned (based on comments from Nick Piggin). But since
+ * bit_spin_lock doesn't actually set that lock bit in a non-debug
+ * uniprocessor kernel, we should avoid setting it here too.
*/
#define PAGE_CGROUP_LOCK_BIT 0x0
-#define PAGE_CGROUP_LOCK (1 << PAGE_CGROUP_LOCK_BIT)
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+#define PAGE_CGROUP_LOCK (1 << PAGE_CGROUP_LOCK_BIT)
+#else
+#define PAGE_CGROUP_LOCK 0x0
+#endif
/*
* A page_cgroup page is associated with every page descriptor. The
@@ -154,37 +161,27 @@
struct list_head lru; /* per cgroup LRU list */
struct page *page;
struct mem_cgroup *mem_cgroup;
- atomic_t ref_cnt; /* Helpful when pages move b/w */
- /* mapped and cached states */
- int flags;
+ int ref_cnt; /* cached, mapped, migrating */
+ int flags;
};
#define PAGE_CGROUP_FLAG_CACHE (0x1) /* charged as cache */
#define PAGE_CGROUP_FLAG_ACTIVE (0x2) /* page is active in this cgroup */
-static inline int page_cgroup_nid(struct page_cgroup *pc)
+static int page_cgroup_nid(struct page_cgroup *pc)
{
return page_to_nid(pc->page);
}
-static inline enum zone_type page_cgroup_zid(struct page_cgroup *pc)
+static enum zone_type page_cgroup_zid(struct page_cgroup *pc)
{
return page_zonenum(pc->page);
}
-enum {
- MEM_CGROUP_TYPE_UNSPEC = 0,
- MEM_CGROUP_TYPE_MAPPED,
- MEM_CGROUP_TYPE_CACHED,
- MEM_CGROUP_TYPE_ALL,
- MEM_CGROUP_TYPE_MAX,
-};
-
enum charge_type {
MEM_CGROUP_CHARGE_TYPE_CACHE = 0,
MEM_CGROUP_CHARGE_TYPE_MAPPED,
};
-
/*
* Always modified under lru lock. Then, not necessary to preempt_disable()
*/
@@ -193,23 +190,21 @@
{
int val = (charge)? 1 : -1;
struct mem_cgroup_stat *stat = &mem->stat;
- VM_BUG_ON(!irqs_disabled());
+ VM_BUG_ON(!irqs_disabled());
if (flags & PAGE_CGROUP_FLAG_CACHE)
- __mem_cgroup_stat_add_safe(stat,
- MEM_CGROUP_STAT_CACHE, val);
+ __mem_cgroup_stat_add_safe(stat, MEM_CGROUP_STAT_CACHE, val);
else
__mem_cgroup_stat_add_safe(stat, MEM_CGROUP_STAT_RSS, val);
}
-static inline struct mem_cgroup_per_zone *
+static struct mem_cgroup_per_zone *
mem_cgroup_zoneinfo(struct mem_cgroup *mem, int nid, int zid)
{
- BUG_ON(!mem->info.nodeinfo[nid]);
return &mem->info.nodeinfo[nid]->zoneinfo[zid];
}
-static inline struct mem_cgroup_per_zone *
+static struct mem_cgroup_per_zone *
page_cgroup_zoneinfo(struct page_cgroup *pc)
{
struct mem_cgroup *mem = pc->mem_cgroup;
@@ -234,18 +229,14 @@
return total;
}
-static struct mem_cgroup init_mem_cgroup;
-
-static inline
-struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont)
+static struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont)
{
return container_of(cgroup_subsys_state(cont,
mem_cgroup_subsys_id), struct mem_cgroup,
css);
}
-static inline
-struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p)
+static struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p)
{
return container_of(task_subsys_state(p, mem_cgroup_subsys_id),
struct mem_cgroup, css);
@@ -267,83 +258,35 @@
static inline int page_cgroup_locked(struct page *page)
{
- return bit_spin_is_locked(PAGE_CGROUP_LOCK_BIT,
- &page->page_cgroup);
+ return bit_spin_is_locked(PAGE_CGROUP_LOCK_BIT, &page->page_cgroup);
}
-void page_assign_page_cgroup(struct page *page, struct page_cgroup *pc)
+static void page_assign_page_cgroup(struct page *page, struct page_cgroup *pc)
{
- int locked;
-
- /*
- * While resetting the page_cgroup we might not hold the
- * page_cgroup lock. free_hot_cold_page() is an example
- * of such a scenario
- */
- if (pc)
- VM_BUG_ON(!page_cgroup_locked(page));
- locked = (page->page_cgroup & PAGE_CGROUP_LOCK);
- page->page_cgroup = ((unsigned long)pc | locked);
+ VM_BUG_ON(!page_cgroup_locked(page));
+ page->page_cgroup = ((unsigned long)pc | PAGE_CGROUP_LOCK);
}
struct page_cgroup *page_get_page_cgroup(struct page *page)
{
- return (struct page_cgroup *)
- (page->page_cgroup & ~PAGE_CGROUP_LOCK);
+ return (struct page_cgroup *) (page->page_cgroup & ~PAGE_CGROUP_LOCK);
}
-static void __always_inline lock_page_cgroup(struct page *page)
+static void lock_page_cgroup(struct page *page)
{
bit_spin_lock(PAGE_CGROUP_LOCK_BIT, &page->page_cgroup);
- VM_BUG_ON(!page_cgroup_locked(page));
}
-static void __always_inline unlock_page_cgroup(struct page *page)
+static int try_lock_page_cgroup(struct page *page)
+{
+ return bit_spin_trylock(PAGE_CGROUP_LOCK_BIT, &page->page_cgroup);
+}
+
+static void unlock_page_cgroup(struct page *page)
{
bit_spin_unlock(PAGE_CGROUP_LOCK_BIT, &page->page_cgroup);
}
-/*
- * Tie new page_cgroup to struct page under lock_page_cgroup()
- * This can fail if the page has been tied to a page_cgroup.
- * If success, returns 0.
- */
-static int page_cgroup_assign_new_page_cgroup(struct page *page,
- struct page_cgroup *pc)
-{
- int ret = 0;
-
- lock_page_cgroup(page);
- if (!page_get_page_cgroup(page))
- page_assign_page_cgroup(page, pc);
- else /* A page is tied to other pc. */
- ret = 1;
- unlock_page_cgroup(page);
- return ret;
-}
-
-/*
- * Clear page->page_cgroup member under lock_page_cgroup().
- * If given "pc" value is different from one page->page_cgroup,
- * page->cgroup is not cleared.
- * Returns a value of page->page_cgroup at lock taken.
- * A can can detect failure of clearing by following
- * clear_page_cgroup(page, pc) == pc
- */
-
-static struct page_cgroup *clear_page_cgroup(struct page *page,
- struct page_cgroup *pc)
-{
- struct page_cgroup *ret;
- /* lock and clear */
- lock_page_cgroup(page);
- ret = page_get_page_cgroup(page);
- if (likely(ret == pc))
- page_assign_page_cgroup(page, NULL);
- unlock_page_cgroup(page);
- return ret;
-}
-
static void __mem_cgroup_remove_list(struct page_cgroup *pc)
{
int from = pc->flags & PAGE_CGROUP_FLAG_ACTIVE;
@@ -399,7 +342,7 @@
int ret;
task_lock(task);
- ret = task->mm && vm_match_cgroup(task->mm, mem);
+ ret = task->mm && mm_match_cgroup(task->mm, mem);
task_unlock(task);
return ret;
}
@@ -407,18 +350,30 @@
/*
* This routine assumes that the appropriate zone's lru lock is already held
*/
-void mem_cgroup_move_lists(struct page_cgroup *pc, bool active)
+void mem_cgroup_move_lists(struct page *page, bool active)
{
+ struct page_cgroup *pc;
struct mem_cgroup_per_zone *mz;
unsigned long flags;
- if (!pc)
+ /*
+ * We cannot lock_page_cgroup while holding zone's lru_lock,
+ * because other holders of lock_page_cgroup can be interrupted
+ * with an attempt to rotate_reclaimable_page. But we cannot
+ * safely get to page_cgroup without it, so just try_lock it:
+ * mem_cgroup_isolate_pages allows for page left on wrong list.
+ */
+ if (!try_lock_page_cgroup(page))
return;
- mz = page_cgroup_zoneinfo(pc);
- spin_lock_irqsave(&mz->lru_lock, flags);
- __mem_cgroup_move_lists(pc, active);
- spin_unlock_irqrestore(&mz->lru_lock, flags);
+ pc = page_get_page_cgroup(page);
+ if (pc) {
+ mz = page_cgroup_zoneinfo(pc);
+ spin_lock_irqsave(&mz->lru_lock, flags);
+ __mem_cgroup_move_lists(pc, active);
+ spin_unlock_irqrestore(&mz->lru_lock, flags);
+ }
+ unlock_page_cgroup(page);
}
/*
@@ -437,6 +392,7 @@
rss = (long)mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_RSS);
return (int)((rss * 100L) / total);
}
+
/*
* This function is called from vmscan.c. In page reclaiming loop. balance
* between active and inactive list is calculated. For memory controller
@@ -500,7 +456,6 @@
struct mem_cgroup_per_zone *mz = mem_cgroup_zoneinfo(mem, nid, zid);
nr_inactive = MEM_CGROUP_ZSTAT(mz, MEM_CGROUP_ZSTAT_INACTIVE);
-
return (nr_inactive >> priority);
}
@@ -586,26 +541,21 @@
* with it
*/
retry:
- if (page) {
- lock_page_cgroup(page);
- pc = page_get_page_cgroup(page);
- /*
- * The page_cgroup exists and
- * the page has already been accounted.
- */
- if (pc) {
- if (unlikely(!atomic_inc_not_zero(&pc->ref_cnt))) {
- /* this page is under being uncharged ? */
- unlock_page_cgroup(page);
- cpu_relax();
- goto retry;
- } else {
- unlock_page_cgroup(page);
- goto done;
- }
- }
+ lock_page_cgroup(page);
+ pc = page_get_page_cgroup(page);
+ /*
+ * The page_cgroup exists and
+ * the page has already been accounted.
+ */
+ if (pc) {
+ VM_BUG_ON(pc->page != page);
+ VM_BUG_ON(pc->ref_cnt <= 0);
+
+ pc->ref_cnt++;
unlock_page_cgroup(page);
+ goto done;
}
+ unlock_page_cgroup(page);
pc = kzalloc(sizeof(struct page_cgroup), gfp_mask);
if (pc == NULL)
@@ -623,16 +573,11 @@
rcu_read_lock();
mem = rcu_dereference(mm->mem_cgroup);
/*
- * For every charge from the cgroup, increment reference
- * count
+ * For every charge from the cgroup, increment reference count
*/
css_get(&mem->css);
rcu_read_unlock();
- /*
- * If we created the page_cgroup, we should free it on exceeding
- * the cgroup limit.
- */
while (res_counter_charge(&mem->res, PAGE_SIZE)) {
if (!(gfp_mask & __GFP_WAIT))
goto out;
@@ -641,12 +586,12 @@
continue;
/*
- * try_to_free_mem_cgroup_pages() might not give us a full
- * picture of reclaim. Some pages are reclaimed and might be
- * moved to swap cache or just unmapped from the cgroup.
- * Check the limit again to see if the reclaim reduced the
- * current usage of the cgroup before giving up
- */
+ * try_to_free_mem_cgroup_pages() might not give us a full
+ * picture of reclaim. Some pages are reclaimed and might be
+ * moved to swap cache or just unmapped from the cgroup.
+ * Check the limit again to see if the reclaim reduced the
+ * current usage of the cgroup before giving up
+ */
if (res_counter_check_under_limit(&mem->res))
continue;
@@ -657,14 +602,16 @@
congestion_wait(WRITE, HZ/10);
}
- atomic_set(&pc->ref_cnt, 1);
+ pc->ref_cnt = 1;
pc->mem_cgroup = mem;
pc->page = page;
pc->flags = PAGE_CGROUP_FLAG_ACTIVE;
if (ctype == MEM_CGROUP_CHARGE_TYPE_CACHE)
pc->flags |= PAGE_CGROUP_FLAG_CACHE;
- if (!page || page_cgroup_assign_new_page_cgroup(page, pc)) {
+ lock_page_cgroup(page);
+ if (page_get_page_cgroup(page)) {
+ unlock_page_cgroup(page);
/*
* Another charge has been added to this page already.
* We take lock_page_cgroup(page) again and read
@@ -673,17 +620,16 @@
res_counter_uncharge(&mem->res, PAGE_SIZE);
css_put(&mem->css);
kfree(pc);
- if (!page)
- goto done;
goto retry;
}
+ page_assign_page_cgroup(page, pc);
mz = page_cgroup_zoneinfo(pc);
spin_lock_irqsave(&mz->lru_lock, flags);
- /* Update statistics vector */
__mem_cgroup_add_list(pc);
spin_unlock_irqrestore(&mz->lru_lock, flags);
+ unlock_page_cgroup(page);
done:
return 0;
out:
@@ -693,70 +639,61 @@
return -ENOMEM;
}
-int mem_cgroup_charge(struct page *page, struct mm_struct *mm,
- gfp_t gfp_mask)
+int mem_cgroup_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask)
{
return mem_cgroup_charge_common(page, mm, gfp_mask,
- MEM_CGROUP_CHARGE_TYPE_MAPPED);
+ MEM_CGROUP_CHARGE_TYPE_MAPPED);
}
-/*
- * See if the cached pages should be charged at all?
- */
int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask)
{
- int ret = 0;
if (!mm)
mm = &init_mm;
-
- ret = mem_cgroup_charge_common(page, mm, gfp_mask,
+ return mem_cgroup_charge_common(page, mm, gfp_mask,
MEM_CGROUP_CHARGE_TYPE_CACHE);
- return ret;
}
/*
* Uncharging is always a welcome operation, we never complain, simply
- * uncharge. This routine should be called with lock_page_cgroup held
+ * uncharge.
*/
-void mem_cgroup_uncharge(struct page_cgroup *pc)
+void mem_cgroup_uncharge_page(struct page *page)
{
+ struct page_cgroup *pc;
struct mem_cgroup *mem;
struct mem_cgroup_per_zone *mz;
- struct page *page;
unsigned long flags;
/*
* Check if our page_cgroup is valid
*/
- if (!pc)
- return;
-
- if (atomic_dec_and_test(&pc->ref_cnt)) {
- page = pc->page;
- mz = page_cgroup_zoneinfo(pc);
- /*
- * get page->cgroup and clear it under lock.
- * force_empty can drop page->cgroup without checking refcnt.
- */
- unlock_page_cgroup(page);
- if (clear_page_cgroup(page, pc) == pc) {
- mem = pc->mem_cgroup;
- css_put(&mem->css);
- res_counter_uncharge(&mem->res, PAGE_SIZE);
- spin_lock_irqsave(&mz->lru_lock, flags);
- __mem_cgroup_remove_list(pc);
- spin_unlock_irqrestore(&mz->lru_lock, flags);
- kfree(pc);
- }
- lock_page_cgroup(page);
- }
-}
-
-void mem_cgroup_uncharge_page(struct page *page)
-{
lock_page_cgroup(page);
- mem_cgroup_uncharge(page_get_page_cgroup(page));
+ pc = page_get_page_cgroup(page);
+ if (!pc)
+ goto unlock;
+
+ VM_BUG_ON(pc->page != page);
+ VM_BUG_ON(pc->ref_cnt <= 0);
+
+ if (--(pc->ref_cnt) == 0) {
+ mz = page_cgroup_zoneinfo(pc);
+ spin_lock_irqsave(&mz->lru_lock, flags);
+ __mem_cgroup_remove_list(pc);
+ spin_unlock_irqrestore(&mz->lru_lock, flags);
+
+ page_assign_page_cgroup(page, NULL);
+ unlock_page_cgroup(page);
+
+ mem = pc->mem_cgroup;
+ res_counter_uncharge(&mem->res, PAGE_SIZE);
+ css_put(&mem->css);
+
+ kfree(pc);
+ return;
+ }
+
+unlock:
unlock_page_cgroup(page);
}
@@ -764,63 +701,59 @@
* Returns non-zero if a page (under migration) has valid page_cgroup member.
* Refcnt of page_cgroup is incremented.
*/
-
int mem_cgroup_prepare_migration(struct page *page)
{
struct page_cgroup *pc;
- int ret = 0;
+
lock_page_cgroup(page);
pc = page_get_page_cgroup(page);
- if (pc && atomic_inc_not_zero(&pc->ref_cnt))
- ret = 1;
+ if (pc)
+ pc->ref_cnt++;
unlock_page_cgroup(page);
- return ret;
+ return pc != NULL;
}
void mem_cgroup_end_migration(struct page *page)
{
- struct page_cgroup *pc;
-
- lock_page_cgroup(page);
- pc = page_get_page_cgroup(page);
- mem_cgroup_uncharge(pc);
- unlock_page_cgroup(page);
+ mem_cgroup_uncharge_page(page);
}
+
/*
- * We know both *page* and *newpage* are now not-on-LRU and Pg_locked.
+ * We know both *page* and *newpage* are now not-on-LRU and PG_locked.
* And no race with uncharge() routines because page_cgroup for *page*
* has extra one reference by mem_cgroup_prepare_migration.
*/
-
void mem_cgroup_page_migration(struct page *page, struct page *newpage)
{
struct page_cgroup *pc;
- struct mem_cgroup *mem;
- unsigned long flags;
struct mem_cgroup_per_zone *mz;
-retry:
- pc = page_get_page_cgroup(page);
- if (!pc)
- return;
- mem = pc->mem_cgroup;
- mz = page_cgroup_zoneinfo(pc);
- if (clear_page_cgroup(page, pc) != pc)
- goto retry;
- spin_lock_irqsave(&mz->lru_lock, flags);
+ unsigned long flags;
+ lock_page_cgroup(page);
+ pc = page_get_page_cgroup(page);
+ if (!pc) {
+ unlock_page_cgroup(page);
+ return;
+ }
+
+ mz = page_cgroup_zoneinfo(pc);
+ spin_lock_irqsave(&mz->lru_lock, flags);
__mem_cgroup_remove_list(pc);
spin_unlock_irqrestore(&mz->lru_lock, flags);
+ page_assign_page_cgroup(page, NULL);
+ unlock_page_cgroup(page);
+
pc->page = newpage;
lock_page_cgroup(newpage);
page_assign_page_cgroup(newpage, pc);
- unlock_page_cgroup(newpage);
mz = page_cgroup_zoneinfo(pc);
spin_lock_irqsave(&mz->lru_lock, flags);
__mem_cgroup_add_list(pc);
spin_unlock_irqrestore(&mz->lru_lock, flags);
- return;
+
+ unlock_page_cgroup(newpage);
}
/*
@@ -829,14 +762,13 @@
* *And* this routine doesn't reclaim page itself, just removes page_cgroup.
*/
#define FORCE_UNCHARGE_BATCH (128)
-static void
-mem_cgroup_force_empty_list(struct mem_cgroup *mem,
+static void mem_cgroup_force_empty_list(struct mem_cgroup *mem,
struct mem_cgroup_per_zone *mz,
int active)
{
struct page_cgroup *pc;
struct page *page;
- int count;
+ int count = FORCE_UNCHARGE_BATCH;
unsigned long flags;
struct list_head *list;
@@ -845,46 +777,36 @@
else
list = &mz->inactive_list;
- if (list_empty(list))
- return;
-retry:
- count = FORCE_UNCHARGE_BATCH;
spin_lock_irqsave(&mz->lru_lock, flags);
-
- while (--count && !list_empty(list)) {
+ while (!list_empty(list)) {
pc = list_entry(list->prev, struct page_cgroup, lru);
page = pc->page;
- /* Avoid race with charge */
- atomic_set(&pc->ref_cnt, 0);
- if (clear_page_cgroup(page, pc) == pc) {
- css_put(&mem->css);
- res_counter_uncharge(&mem->res, PAGE_SIZE);
- __mem_cgroup_remove_list(pc);
- kfree(pc);
- } else /* being uncharged ? ...do relax */
- break;
+ get_page(page);
+ spin_unlock_irqrestore(&mz->lru_lock, flags);
+ mem_cgroup_uncharge_page(page);
+ put_page(page);
+ if (--count <= 0) {
+ count = FORCE_UNCHARGE_BATCH;
+ cond_resched();
+ }
+ spin_lock_irqsave(&mz->lru_lock, flags);
}
spin_unlock_irqrestore(&mz->lru_lock, flags);
- if (!list_empty(list)) {
- cond_resched();
- goto retry;
- }
- return;
}
/*
* make mem_cgroup's charge to be 0 if there is no task.
* This enables deleting this mem_cgroup.
*/
-
-int mem_cgroup_force_empty(struct mem_cgroup *mem)
+static int mem_cgroup_force_empty(struct mem_cgroup *mem)
{
int ret = -EBUSY;
int node, zid;
+
css_get(&mem->css);
/*
* page reclaim code (kswapd etc..) will move pages between
-` * active_list <-> inactive_list while we don't take a lock.
+ * active_list <-> inactive_list while we don't take a lock.
* So, we have to do loop here until all lists are empty.
*/
while (mem->res.usage > 0) {
@@ -906,9 +828,7 @@
return ret;
}
-
-
-int mem_cgroup_write_strategy(char *buf, unsigned long long *tmp)
+static int mem_cgroup_write_strategy(char *buf, unsigned long long *tmp)
{
*tmp = memparse(buf, &buf);
if (*buf != '\0')
@@ -945,8 +865,7 @@
size_t nbytes, loff_t *ppos)
{
struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
- int ret;
- ret = mem_cgroup_force_empty(mem);
+ int ret = mem_cgroup_force_empty(mem);
if (!ret)
ret = nbytes;
return ret;
@@ -955,7 +874,6 @@
/*
* Note: This should be removed if cgroup supports write-only file.
*/
-
static ssize_t mem_force_empty_read(struct cgroup *cont,
struct cftype *cft,
struct file *file, char __user *userbuf,
@@ -964,7 +882,6 @@
return -EINVAL;
}
-
static const struct mem_cgroup_stat_desc {
const char *msg;
u64 unit;
@@ -1017,8 +934,6 @@
return single_open(file, mem_control_stat_show, cont);
}
-
-
static struct cftype mem_cgroup_files[] = {
{
.name = "usage_in_bytes",
@@ -1084,9 +999,6 @@
kfree(mem->info.nodeinfo[node]);
}
-
-static struct mem_cgroup init_mem_cgroup;
-
static struct cgroup_subsys_state *
mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
{
@@ -1176,7 +1088,6 @@
out:
mmput(mm);
- return;
}
struct cgroup_subsys mem_cgroup_subsys = {
diff --git a/mm/memory.c b/mm/memory.c
index ce3c9e4..0d14d1e 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1711,7 +1711,7 @@
}
return ret;
oom_free_new:
- __free_page(new_page);
+ page_cache_release(new_page);
oom:
if (old_page)
page_cache_release(old_page);
@@ -2093,12 +2093,9 @@
unlock_page(page);
if (write_access) {
- /* XXX: We could OR the do_wp_page code with this one? */
- if (do_wp_page(mm, vma, address,
- page_table, pmd, ptl, pte) & VM_FAULT_OOM) {
- mem_cgroup_uncharge_page(page);
- ret = VM_FAULT_OOM;
- }
+ ret |= do_wp_page(mm, vma, address, page_table, pmd, ptl, pte);
+ if (ret & VM_FAULT_ERROR)
+ ret &= VM_FAULT_ERROR;
goto out;
}
@@ -2163,7 +2160,7 @@
page_cache_release(page);
goto unlock;
oom_free_page:
- __free_page(page);
+ page_cache_release(page);
oom:
return VM_FAULT_OOM;
}
diff --git a/mm/migrate.c b/mm/migrate.c
index a73504f..4e0eccc 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -153,11 +153,6 @@
return;
}
- if (mem_cgroup_charge(new, mm, GFP_KERNEL)) {
- pte_unmap(ptep);
- return;
- }
-
ptl = pte_lockptr(mm, pmd);
spin_lock(ptl);
pte = *ptep;
@@ -169,6 +164,20 @@
if (!is_migration_entry(entry) || migration_entry_to_page(entry) != old)
goto out;
+ /*
+ * Yes, ignore the return value from a GFP_ATOMIC mem_cgroup_charge.
+ * Failure is not an option here: we're now expected to remove every
+ * migration pte, and will cause crashes otherwise. Normally this
+ * is not an issue: mem_cgroup_prepare_migration bumped up the old
+ * page_cgroup count for safety, that's now attached to the new page,
+ * so this charge should just be another incrementation of the count,
+ * to keep in balance with rmap.c's mem_cgroup_uncharging. But if
+ * there's been a force_empty, those reference counts may no longer
+ * be reliable, and this charge can actually fail: oh well, we don't
+ * make the situation any worse by proceeding as if it had succeeded.
+ */
+ mem_cgroup_charge(new, mm, GFP_ATOMIC);
+
get_page(new);
pte = pte_mkold(mk_pte(new, vma->vm_page_prot));
if (is_write_migration_entry(entry))
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 4194b9d..44b2da1 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -412,7 +412,7 @@
return oom_kill_task(p);
}
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
void mem_cgroup_out_of_memory(struct mem_cgroup *mem, gfp_t gfp_mask)
{
unsigned long points = 0;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 8896e87..402a504f 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -19,6 +19,7 @@
#include <linux/swap.h>
#include <linux/interrupt.h>
#include <linux/pagemap.h>
+#include <linux/jiffies.h>
#include <linux/bootmem.h>
#include <linux/compiler.h>
#include <linux/kernel.h>
@@ -221,13 +222,19 @@
static void bad_page(struct page *page)
{
- printk(KERN_EMERG "Bad page state in process '%s'\n"
- KERN_EMERG "page:%p flags:0x%0*lx mapping:%p mapcount:%d count:%d\n"
- KERN_EMERG "Trying to fix it up, but a reboot is needed\n"
- KERN_EMERG "Backtrace:\n",
+ void *pc = page_get_page_cgroup(page);
+
+ printk(KERN_EMERG "Bad page state in process '%s'\n" KERN_EMERG
+ "page:%p flags:0x%0*lx mapping:%p mapcount:%d count:%d\n",
current->comm, page, (int)(2*sizeof(unsigned long)),
(unsigned long)page->flags, page->mapping,
page_mapcount(page), page_count(page));
+ if (pc) {
+ printk(KERN_EMERG "cgroup:%p\n", pc);
+ page_reset_bad_cgroup(page);
+ }
+ printk(KERN_EMERG "Trying to fix it up, but a reboot is needed\n"
+ KERN_EMERG "Backtrace:\n");
dump_stack();
page->flags &= ~(1 << PG_lru |
1 << PG_private |
@@ -453,6 +460,7 @@
{
if (unlikely(page_mapcount(page) |
(page->mapping != NULL) |
+ (page_get_page_cgroup(page) != NULL) |
(page_count(page) != 0) |
(page->flags & (
1 << PG_lru |
@@ -602,6 +610,7 @@
{
if (unlikely(page_mapcount(page) |
(page->mapping != NULL) |
+ (page_get_page_cgroup(page) != NULL) |
(page_count(page) != 0) |
(page->flags & (
1 << PG_lru |
@@ -988,7 +997,6 @@
if (!PageHighMem(page))
debug_check_no_locks_freed(page_address(page), PAGE_SIZE);
- VM_BUG_ON(page_get_page_cgroup(page));
arch_free_page(page, 0);
kernel_map_pages(page, 1, 0);
@@ -1276,7 +1284,7 @@
if (!zlc)
return NULL;
- if (jiffies - zlc->last_full_zap > 1 * HZ) {
+ if (time_after(jiffies, zlc->last_full_zap + HZ)) {
bitmap_zero(zlc->fullzones, MAX_ZONES_PER_ZONELIST);
zlc->last_full_zap = jiffies;
}
@@ -2527,7 +2535,6 @@
set_page_links(page, zone, nid, pfn);
init_page_count(page);
reset_page_mapcount(page);
- page_assign_page_cgroup(page, NULL);
SetPageReserved(page);
/*
diff --git a/mm/rmap.c b/mm/rmap.c
index 8fd527c..0c9a2df 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -321,7 +321,7 @@
* counting on behalf of references from different
* cgroups
*/
- if (mem_cont && !vm_match_cgroup(vma->vm_mm, mem_cont))
+ if (mem_cont && !mm_match_cgroup(vma->vm_mm, mem_cont))
continue;
referenced += page_referenced_one(page, vma, &mapcount);
if (!mapcount)
@@ -382,7 +382,7 @@
* counting on behalf of references from different
* cgroups
*/
- if (mem_cont && !vm_match_cgroup(vma->vm_mm, mem_cont))
+ if (mem_cont && !mm_match_cgroup(vma->vm_mm, mem_cont))
continue;
if ((vma->vm_flags & (VM_LOCKED|VM_MAYSHARE))
== (VM_LOCKED|VM_MAYSHARE)) {
diff --git a/mm/shmem.c b/mm/shmem.c
index 90b576c..3372bc5 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1370,14 +1370,17 @@
shmem_swp_unmap(entry);
spin_unlock(&info->lock);
unlock_page(swappage);
- page_cache_release(swappage);
if (error == -ENOMEM) {
/* allow reclaim from this memory cgroup */
- error = mem_cgroup_cache_charge(NULL,
+ error = mem_cgroup_cache_charge(swappage,
current->mm, gfp & ~__GFP_HIGHMEM);
- if (error)
+ if (error) {
+ page_cache_release(swappage);
goto failed;
+ }
+ mem_cgroup_uncharge_page(swappage);
}
+ page_cache_release(swappage);
goto repeat;
}
} else if (sgp == SGP_READ && !filepage) {
diff --git a/mm/swap.c b/mm/swap.c
index 710a20b..d4ec59a 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -176,7 +176,7 @@
SetPageActive(page);
add_page_to_active_list(zone, page);
__count_vm_event(PGACTIVATE);
- mem_cgroup_move_lists(page_get_page_cgroup(page), true);
+ mem_cgroup_move_lists(page, true);
}
spin_unlock_irq(&zone->lru_lock);
}
diff --git a/mm/vmscan.c b/mm/vmscan.c
index a26dabd..4571158 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -126,7 +126,7 @@
static LIST_HEAD(shrinker_list);
static DECLARE_RWSEM(shrinker_rwsem);
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
#define scan_global_lru(sc) (!(sc)->mem_cgroup)
#else
#define scan_global_lru(sc) (1)
@@ -1128,7 +1128,7 @@
ClearPageActive(page);
list_move(&page->lru, &zone->inactive_list);
- mem_cgroup_move_lists(page_get_page_cgroup(page), false);
+ mem_cgroup_move_lists(page, false);
pgmoved++;
if (!pagevec_add(&pvec, page)) {
__mod_zone_page_state(zone, NR_INACTIVE, pgmoved);
@@ -1156,8 +1156,9 @@
VM_BUG_ON(PageLRU(page));
SetPageLRU(page);
VM_BUG_ON(!PageActive(page));
+
list_move(&page->lru, &zone->active_list);
- mem_cgroup_move_lists(page_get_page_cgroup(page), true);
+ mem_cgroup_move_lists(page, true);
pgmoved++;
if (!pagevec_add(&pvec, page)) {
__mod_zone_page_state(zone, NR_ACTIVE, pgmoved);
@@ -1427,7 +1428,7 @@
return do_try_to_free_pages(zones, gfp_mask, &sc);
}
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
gfp_t gfp_mask)
diff --git a/samples/Kconfig b/samples/Kconfig
index 74d97cc..e1fb471 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -22,5 +22,16 @@
If in doubt, say "N" here.
+config SAMPLE_KPROBES
+ tristate "Build kprobes examples -- loadable modules only"
+ depends on KPROBES && m
+ help
+ This build several kprobes example modules.
+
+config SAMPLE_KRETPROBES
+ tristate "Build kretprobes example -- loadable modules only"
+ default m
+ depends on SAMPLE_KPROBES && KRETPROBES
+
endif # SAMPLES
diff --git a/samples/Makefile b/samples/Makefile
index 8652d0f..2e02575 100644
--- a/samples/Makefile
+++ b/samples/Makefile
@@ -1,3 +1,3 @@
# Makefile for Linux samples code
-obj-$(CONFIG_SAMPLES) += markers/ kobject/
+obj-$(CONFIG_SAMPLES) += markers/ kobject/ kprobes/
diff --git a/samples/kprobes/Makefile b/samples/kprobes/Makefile
new file mode 100644
index 0000000..68739bc
--- /dev/null
+++ b/samples/kprobes/Makefile
@@ -0,0 +1,5 @@
+# builds the kprobes example kernel modules;
+# then to use one (as root): insmod <module_name.ko>
+
+obj-$(CONFIG_SAMPLE_KPROBES) += kprobe_example.o jprobe_example.o
+obj-$(CONFIG_SAMPLE_KRETPROBES) += kretprobe_example.o
diff --git a/samples/kprobes/jprobe_example.c b/samples/kprobes/jprobe_example.c
new file mode 100644
index 0000000..b754135
--- /dev/null
+++ b/samples/kprobes/jprobe_example.c
@@ -0,0 +1,68 @@
+/*
+ * Here's a sample kernel module showing the use of jprobes to dump
+ * the arguments of do_fork().
+ *
+ * For more information on theory of operation of jprobes, see
+ * Documentation/kprobes.txt
+ *
+ * Build and insert the kernel module as done in the kprobe example.
+ * You will see the trace data in /var/log/messages and on the
+ * console whenever do_fork() is invoked to create a new process.
+ * (Some messages may be suppressed if syslogd is configured to
+ * eliminate duplicate messages.)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+
+/*
+ * Jumper probe for do_fork.
+ * Mirror principle enables access to arguments of the probed routine
+ * from the probe handler.
+ */
+
+/* Proxy routine having the same arguments as actual do_fork() routine */
+static long jdo_fork(unsigned long clone_flags, unsigned long stack_start,
+ struct pt_regs *regs, unsigned long stack_size,
+ int __user *parent_tidptr, int __user *child_tidptr)
+{
+ printk(KERN_INFO "jprobe: clone_flags = 0x%lx, stack_size = 0x%lx,"
+ " regs = 0x%p\n",
+ clone_flags, stack_size, regs);
+
+ /* Always end with a call to jprobe_return(). */
+ jprobe_return();
+ return 0;
+}
+
+static struct jprobe my_jprobe = {
+ .entry = jdo_fork,
+ .kp = {
+ .symbol_name = "do_fork",
+ },
+};
+
+static int __init jprobe_init(void)
+{
+ int ret;
+
+ ret = register_jprobe(&my_jprobe);
+ if (ret < 0) {
+ printk(KERN_INFO "register_jprobe failed, returned %d\n", ret);
+ return -1;
+ }
+ printk(KERN_INFO "Planted jprobe at %p, handler addr %p\n",
+ my_jprobe.kp.addr, my_jprobe.entry);
+ return 0;
+}
+
+static void __exit jprobe_exit(void)
+{
+ unregister_jprobe(&my_jprobe);
+ printk(KERN_INFO "jprobe at %p unregistered\n", my_jprobe.kp.addr);
+}
+
+module_init(jprobe_init)
+module_exit(jprobe_exit)
+MODULE_LICENSE("GPL");
diff --git a/samples/kprobes/kprobe_example.c b/samples/kprobes/kprobe_example.c
new file mode 100644
index 0000000..a681998
--- /dev/null
+++ b/samples/kprobes/kprobe_example.c
@@ -0,0 +1,91 @@
+/*
+ * NOTE: This example is works on x86 and powerpc.
+ * Here's a sample kernel module showing the use of kprobes to dump a
+ * stack trace and selected registers when do_fork() is called.
+ *
+ * For more information on theory of operation of kprobes, see
+ * Documentation/kprobes.txt
+ *
+ * You will see the trace data in /var/log/messages and on the console
+ * whenever do_fork() is invoked to create a new process.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+
+/* For each probe you need to allocate a kprobe structure */
+static struct kprobe kp = {
+ .symbol_name = "do_fork",
+};
+
+/* kprobe pre_handler: called just before the probed instruction is executed */
+static int handler_pre(struct kprobe *p, struct pt_regs *regs)
+{
+#ifdef CONFIG_X86
+ printk(KERN_INFO "pre_handler: p->addr = 0x%p, ip = %lx,"
+ " flags = 0x%lx\n",
+ p->addr, regs->ip, regs->flags);
+#endif
+#ifdef CONFIG_PPC
+ printk(KERN_INFO "pre_handler: p->addr = 0x%p, nip = 0x%lx,"
+ " msr = 0x%lx\n",
+ p->addr, regs->nip, regs->msr);
+#endif
+
+ /* A dump_stack() here will give a stack backtrace */
+ return 0;
+}
+
+/* kprobe post_handler: called after the probed instruction is executed */
+static void handler_post(struct kprobe *p, struct pt_regs *regs,
+ unsigned long flags)
+{
+#ifdef CONFIG_X86
+ printk(KERN_INFO "post_handler: p->addr = 0x%p, flags = 0x%lx\n",
+ p->addr, regs->flags);
+#endif
+#ifdef CONFIG_PPC
+ printk(KERN_INFO "post_handler: p->addr = 0x%p, msr = 0x%lx\n",
+ p->addr, regs->msr);
+#endif
+}
+
+/*
+ * fault_handler: this is called if an exception is generated for any
+ * instruction within the pre- or post-handler, or when Kprobes
+ * single-steps the probed instruction.
+ */
+static int handler_fault(struct kprobe *p, struct pt_regs *regs, int trapnr)
+{
+ printk(KERN_INFO "fault_handler: p->addr = 0x%p, trap #%dn",
+ p->addr, trapnr);
+ /* Return 0 because we don't handle the fault. */
+ return 0;
+}
+
+static int __init kprobe_init(void)
+{
+ int ret;
+ kp.pre_handler = handler_pre;
+ kp.post_handler = handler_post;
+ kp.fault_handler = handler_fault;
+
+ ret = register_kprobe(&kp);
+ if (ret < 0) {
+ printk(KERN_INFO "register_kprobe failed, returned %d\n", ret);
+ return ret;
+ }
+ printk(KERN_INFO "Planted kprobe at %p\n", kp.addr);
+ return 0;
+}
+
+static void __exit kprobe_exit(void)
+{
+ unregister_kprobe(&kp);
+ printk(KERN_INFO "kprobe at %p unregistered\n", kp.addr);
+}
+
+module_init(kprobe_init)
+module_exit(kprobe_exit)
+MODULE_LICENSE("GPL");
diff --git a/samples/kprobes/kretprobe_example.c b/samples/kprobes/kretprobe_example.c
new file mode 100644
index 0000000..4e764b3
--- /dev/null
+++ b/samples/kprobes/kretprobe_example.c
@@ -0,0 +1,106 @@
+/*
+ * kretprobe_example.c
+ *
+ * Here's a sample kernel module showing the use of return probes to
+ * report the return value and total time taken for probed function
+ * to run.
+ *
+ * usage: insmod kretprobe_example.ko func=<func_name>
+ *
+ * If no func_name is specified, do_fork is instrumented
+ *
+ * For more information on theory of operation of kretprobes, see
+ * Documentation/kprobes.txt
+ *
+ * Build and insert the kernel module as done in the kprobe example.
+ * You will see the trace data in /var/log/messages and on the console
+ * whenever the probed function returns. (Some messages may be suppressed
+ * if syslogd is configured to eliminate duplicate messages.)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+#include <linux/ktime.h>
+#include <linux/limits.h>
+
+static char func_name[NAME_MAX] = "do_fork";
+module_param_string(func, func_name, NAME_MAX, S_IRUGO);
+MODULE_PARM_DESC(func, "Function to kretprobe; this module will report the"
+ " function's execution time");
+
+/* per-instance private data */
+struct my_data {
+ ktime_t entry_stamp;
+};
+
+/* Here we use the entry_hanlder to timestamp function entry */
+static int entry_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+ struct my_data *data;
+
+ if (!current->mm)
+ return 1; /* Skip kernel threads */
+
+ data = (struct my_data *)ri->data;
+ data->entry_stamp = ktime_get();
+ return 0;
+}
+
+/*
+ * Return-probe handler: Log the return value and duration. Duration may turn
+ * out to be zero consistently, depending upon the granularity of time
+ * accounting on the platform.
+ */
+static int ret_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+ int retval = regs_return_value(regs);
+ struct my_data *data = (struct my_data *)ri->data;
+ s64 delta;
+ ktime_t now;
+
+ now = ktime_get();
+ delta = ktime_to_ns(ktime_sub(now, data->entry_stamp));
+ printk(KERN_INFO "%s returned %d and took %lld ns to execute\n",
+ func_name, retval, (long long)delta);
+ return 0;
+}
+
+static struct kretprobe my_kretprobe = {
+ .handler = ret_handler,
+ .entry_handler = entry_handler,
+ .data_size = sizeof(struct my_data),
+ /* Probe up to 20 instances concurrently. */
+ .maxactive = 20,
+};
+
+static int __init kretprobe_init(void)
+{
+ int ret;
+
+ my_kretprobe.kp.symbol_name = func_name;
+ ret = register_kretprobe(&my_kretprobe);
+ if (ret < 0) {
+ printk(KERN_INFO "register_kretprobe failed, returned %d\n",
+ ret);
+ return -1;
+ }
+ printk(KERN_INFO "Planted return probe at %s: %p\n",
+ my_kretprobe.kp.symbol_name, my_kretprobe.kp.addr);
+ return 0;
+}
+
+static void __exit kretprobe_exit(void)
+{
+ unregister_kretprobe(&my_kretprobe);
+ printk(KERN_INFO "kretprobe at %p unregistered\n",
+ my_kretprobe.kp.addr);
+
+ /* nmissed > 0 suggests that maxactive was set too low. */
+ printk(KERN_INFO "Missed probing %d instances of %s\n",
+ my_kretprobe.nmissed, my_kretprobe.kp.symbol_name);
+}
+
+module_init(kretprobe_init)
+module_exit(kretprobe_exit)
+MODULE_LICENSE("GPL");
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 2086a85..2a7cef9 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -9,7 +9,7 @@
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.14';
+my $V = '0.15';
use Getopt::Long qw(:config no_auto_abbrev);
@@ -105,8 +105,7 @@
__iomem|
__must_check|
__init_refok|
- __kprobes|
- fastcall
+ __kprobes
}x;
our $Attribute = qr{
const|
@@ -158,7 +157,10 @@
\b
(?:const\s+)?
(?:unsigned\s+)?
- $all
+ (?:
+ $all|
+ (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)
+ )
(?:\s+$Sparse|\s+const)*
\b
}x;
@@ -362,6 +364,7 @@
my $type = '';
my $level = 0;
+ my $p;
my $c;
my $len = 0;
@@ -386,6 +389,7 @@
last;
}
}
+ $p = $c;
$c = substr($blk, $off, 1);
$remainder = substr($blk, $off);
@@ -397,8 +401,9 @@
}
# An else is really a conditional as long as its not else if
- if ($level == 0 && $remainder =~ /(\s+else)(?:\s|{)/ &&
- $remainder !~ /\s+else\s+if\b/) {
+ if ($level == 0 && (!defined($p) || $p =~ /(?:\s|\})/) &&
+ $remainder =~ /(else)(?:\s|{)/ &&
+ $remainder !~ /else\s+if\b/) {
$coff = $off + length($1);
}
@@ -445,21 +450,73 @@
$line, $remain + 1, $off - $loff + 1, $level);
}
+sub statement_lines {
+ my ($stmt) = @_;
+
+ # Strip the diff line prefixes and rip blank lines at start and end.
+ $stmt =~ s/(^|\n)./$1/g;
+ $stmt =~ s/^\s*//;
+ $stmt =~ s/\s*$//;
+
+ my @stmt_lines = ($stmt =~ /\n/g);
+
+ return $#stmt_lines + 2;
+}
+
+sub statement_rawlines {
+ my ($stmt) = @_;
+
+ my @stmt_lines = ($stmt =~ /\n/g);
+
+ return $#stmt_lines + 2;
+}
+
+sub statement_block_size {
+ my ($stmt) = @_;
+
+ $stmt =~ s/(^|\n)./$1/g;
+ $stmt =~ s/^\s*{//;
+ $stmt =~ s/}\s*$//;
+ $stmt =~ s/^\s*//;
+ $stmt =~ s/\s*$//;
+
+ my @stmt_lines = ($stmt =~ /\n/g);
+ my @stmt_statements = ($stmt =~ /;/g);
+
+ my $stmt_lines = $#stmt_lines + 2;
+ my $stmt_statements = $#stmt_statements + 1;
+
+ if ($stmt_lines > $stmt_statements) {
+ return $stmt_lines;
+ } else {
+ return $stmt_statements;
+ }
+}
+
sub ctx_statement_full {
my ($linenr, $remain, $off) = @_;
my ($statement, $condition, $level);
my (@chunks);
+ # Grab the first conditional/block pair.
($statement, $condition, $linenr, $remain, $off, $level) =
ctx_statement_block($linenr, $remain, $off);
#print "F: c<$condition> s<$statement>\n";
+ push(@chunks, [ $condition, $statement ]);
+ if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:if|else|do)\b/s)) {
+ return ($level, $linenr, @chunks);
+ }
+
+ # Pull in the following conditional/block pairs and see if they
+ # could continue the statement.
for (;;) {
- push(@chunks, [ $condition, $statement ]);
- last if (!($remain > 0 && $condition =~ /^.\s*(?:if|else|do)/));
($statement, $condition, $linenr, $remain, $off, $level) =
ctx_statement_block($linenr, $remain, $off);
- #print "C: c<$condition> s<$statement>\n";
+ #print "C: c<$condition> s<$statement> remain<$remain>\n";
+ last if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:else|do)\b/s));
+ #print "C: push\n";
+ push(@chunks, [ $condition, $statement ]);
}
return ($level, $linenr, @chunks);
@@ -593,13 +650,13 @@
}
my $av_preprocessor = 0;
-my $av_paren = 0;
+my $av_pending;
my @av_paren_type;
sub annotate_reset {
$av_preprocessor = 0;
- $av_paren = 0;
- @av_paren_type = ();
+ $av_pending = '_';
+ @av_paren_type = ('E');
}
sub annotate_values {
@@ -611,12 +668,13 @@
print "$stream\n" if ($dbg_values > 1);
while (length($cur)) {
- print " <$type> " if ($dbg_values > 1);
+ print " <" . join('', @av_paren_type) .
+ "> <$type> " if ($dbg_values > 1);
if ($cur =~ /^(\s+)/o) {
print "WS($1)\n" if ($dbg_values > 1);
if ($1 =~ /\n/ && $av_preprocessor) {
+ $type = pop(@av_paren_type);
$av_preprocessor = 0;
- $type = 'N';
}
} elsif ($cur =~ /^($Type)/) {
@@ -626,11 +684,33 @@
} elsif ($cur =~ /^(#\s*define\s*$Ident)(\(?)/o) {
print "DEFINE($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
- $av_paren_type[$av_paren] = 'N';
+ $av_pending = 'N';
- } elsif ($cur =~ /^(#\s*(?:ifdef|ifndef|if|else|elif|endif))/o) {
- print "PRE($1)\n" if ($dbg_values > 1);
+ } elsif ($cur =~ /^(#\s*(?:ifdef|ifndef|if))/o) {
+ print "PRE_START($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
+
+ push(@av_paren_type, $type);
+ push(@av_paren_type, $type);
+ $type = 'N';
+
+ } elsif ($cur =~ /^(#\s*(?:else|elif))/o) {
+ print "PRE_RESTART($1)\n" if ($dbg_values > 1);
+ $av_preprocessor = 1;
+
+ push(@av_paren_type, $av_paren_type[$#av_paren_type]);
+
+ $type = 'N';
+
+ } elsif ($cur =~ /^(#\s*(?:endif))/o) {
+ print "PRE_END($1)\n" if ($dbg_values > 1);
+
+ $av_preprocessor = 1;
+
+ # Assume all arms of the conditional end as this
+ # one does, and continue as if the #endif was not here.
+ pop(@av_paren_type);
+ push(@av_paren_type, $type);
$type = 'N';
} elsif ($cur =~ /^(\\\n)/o) {
@@ -639,13 +719,13 @@
} elsif ($cur =~ /^(sizeof)\s*(\()?/o) {
print "SIZEOF($1)\n" if ($dbg_values > 1);
if (defined $2) {
- $av_paren_type[$av_paren] = 'V';
+ $av_pending = 'V';
}
$type = 'N';
} elsif ($cur =~ /^(if|while|typeof|__typeof__|for)\b/o) {
print "COND($1)\n" if ($dbg_values > 1);
- $av_paren_type[$av_paren] = 'N';
+ $av_pending = 'N';
$type = 'N';
} elsif ($cur =~/^(return|case|else)/o) {
@@ -654,14 +734,14 @@
} elsif ($cur =~ /^(\()/o) {
print "PAREN('$1')\n" if ($dbg_values > 1);
- $av_paren++;
+ push(@av_paren_type, $av_pending);
+ $av_pending = '_';
$type = 'N';
} elsif ($cur =~ /^(\))/o) {
- $av_paren-- if ($av_paren > 0);
- if (defined $av_paren_type[$av_paren]) {
- $type = $av_paren_type[$av_paren];
- undef $av_paren_type[$av_paren];
+ my $new_type = pop(@av_paren_type);
+ if ($new_type ne '_') {
+ $type = $new_type;
print "PAREN('$1') -> $type\n"
if ($dbg_values > 1);
} else {
@@ -670,7 +750,7 @@
} elsif ($cur =~ /^($Ident)\(/o) {
print "FUNC($1)\n" if ($dbg_values > 1);
- $av_paren_type[$av_paren] = 'V';
+ $av_pending = 'V';
} elsif ($cur =~ /^($Ident|$Constant)/o) {
print "IDENT($1)\n" if ($dbg_values > 1);
@@ -680,11 +760,11 @@
print "ASSIGN($1)\n" if ($dbg_values > 1);
$type = 'N';
- } elsif ($cur =~/^(;)/) {
+ } elsif ($cur =~/^(;|{|})/) {
print "END($1)\n" if ($dbg_values > 1);
$type = 'E';
- } elsif ($cur =~ /^(;|{|}|\?|:|\[)/o) {
+ } elsif ($cur =~ /^(;|\?|:|\[)/o) {
print "CLOSE($1)\n" if ($dbg_values > 1);
$type = 'N';
@@ -988,7 +1068,7 @@
}
# check for RCS/CVS revision markers
- if ($rawline =~ /\$(Revision|Log|Id)(?:\$|)/) {
+ if ($rawline =~ /^\+.*\$(Revision|Log|Id)(?:\$|)/) {
WARN("CVS style keyword markers, these will _not_ be updated\n". $herecurr);
}
@@ -999,41 +1079,44 @@
# Check for potential 'bare' types
if ($realcnt) {
+ my ($s, $c) = ctx_statement_block($linenr, $realcnt, 0);
+ $s =~ s/\n./ /g;
+ $s =~ s/{.*$//;
+
# Ignore goto labels.
- if ($line =~ /$Ident:\*$/) {
+ if ($s =~ /$Ident:\*$/) {
# Ignore functions being called
- } elsif ($line =~ /^.\s*$Ident\s*\(/) {
+ } elsif ($s =~ /^.\s*$Ident\s*\(/) {
# definitions in global scope can only start with types
- } elsif ($line =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/) {
- possible($1, $line);
+ } elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/) {
+ possible($1, $s);
# declarations always start with types
- } elsif ($prev_values eq 'E' && $line =~ /^.\s*(?:$Storage\s+)?(?:const\s+)?($Ident)\b(:?\s+$Sparse)?\s*\**\s*$Ident\s*(?:;|=|,)/) {
- possible($1);
+ } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:const\s+)?($Ident)\b(:?\s+$Sparse)?\s*\**\s*$Ident\s*(?:;|=|,)/) {
+ possible($1, $s);
}
# any (foo ... *) is a pointer cast, and foo is a type
- while ($line =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/g) {
- possible($1, $line);
+ while ($s =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/g) {
+ possible($1, $s);
}
# Check for any sort of function declaration.
# int foo(something bar, other baz);
# void (*store_gdt)(x86_descr_ptr *);
- if ($prev_values eq 'E' && $line =~ /^(.(?:typedef\s*)?(?:(?:$Storage|$Inline)\s*)*\s*$Type\s*(?:\b$Ident|\(\*\s*$Ident\))\s*)\(/) {
+ if ($prev_values eq 'E' && $s =~ /^(.(?:typedef\s*)?(?:(?:$Storage|$Inline)\s*)*\s*$Type\s*(?:\b$Ident|\(\*\s*$Ident\))\s*)\(/) {
my ($name_len) = length($1);
- my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, $name_len);
- my $ctx = join("\n", @ctx);
- $ctx =~ s/\n.//;
+ my $ctx = $s;
substr($ctx, 0, $name_len + 1) = '';
$ctx =~ s/\)[^\)]*$//;
+
for my $arg (split(/\s*,\s*/, $ctx)) {
if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/ || $arg =~ /^($Ident)$/) {
- possible($1, $line);
+ possible($1, $s);
}
}
}
@@ -1100,8 +1183,8 @@
$curr_values = $prev_values . $curr_values;
if ($dbg_values) {
my $outline = $opline; $outline =~ s/\t/ /g;
- warn "--> .$outline\n";
- warn "--> $curr_values\n";
+ print "$linenr > .$outline\n";
+ print "$linenr > $curr_values\n";
}
$prev_values = substr($curr_values, -1);
@@ -1148,7 +1231,9 @@
if (($prevline !~ /^}/) &&
($prevline !~ /^\+}/) &&
($prevline !~ /^ }/) &&
- ($prevline !~ /\b\Q$name\E(?:\s+$Attribute)?\s*(?:;|=)/)) {
+ ($prevline !~ /^.DECLARE_$Ident\(\Q$name\E\)/) &&
+ ($prevline !~ /^.LIST_HEAD\(\Q$name\E\)/) &&
+ ($prevline !~ /\b\Q$name\E(?:\s+$Attribute)?\s*(?:;|=|\[)/)) {
WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
}
}
@@ -1266,7 +1351,7 @@
=>|->|<<|>>|<|>|=|!|~|
&&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%
}x;
- my @elements = split(/($;+|$ops|;)/, $opline);
+ my @elements = split(/($ops|;)/, $opline);
my $off = 0;
my $blank = copy_spacing($opline);
@@ -1277,6 +1362,7 @@
my $a = '';
$a = 'V' if ($elements[$n] ne '');
$a = 'W' if ($elements[$n] =~ /\s$/);
+ $a = 'C' if ($elements[$n] =~ /$;$/);
$a = 'B' if ($elements[$n] =~ /(\[|\()$/);
$a = 'O' if ($elements[$n] eq '');
$a = 'E' if ($elements[$n] eq '' && $n == 0);
@@ -1287,6 +1373,7 @@
if (defined $elements[$n + 2]) {
$c = 'V' if ($elements[$n + 2] ne '');
$c = 'W' if ($elements[$n + 2] =~ /^\s/);
+ $c = 'C' if ($elements[$n + 2] =~ /^$;/);
$c = 'B' if ($elements[$n + 2] =~ /^(\)|\]|;)/);
$c = 'O' if ($elements[$n + 2] eq '');
$c = 'E' if ($elements[$n + 2] =~ /\s*\\$/);
@@ -1330,13 +1417,13 @@
if ($op_type ne 'V' &&
$ca =~ /\s$/ && $cc =~ /^\s*,/) {
- # Ignore comments
- } elsif ($op =~ /^$;+$/) {
+# # Ignore comments
+# } elsif ($op =~ /^$;+$/) {
# ; should have either the end of line or a space or \ after it
} elsif ($op eq ';') {
- if ($ctx !~ /.x[WEB]/ && $cc !~ /^\\/ &&
- $cc !~ /^;/) {
+ if ($ctx !~ /.x[WEBC]/ &&
+ $cc !~ /^\\/ && $cc !~ /^;/) {
ERROR("need space after that '$op' $at\n" . $hereptr);
}
@@ -1351,7 +1438,7 @@
# , must have a space on the right.
} elsif ($op eq ',') {
- if ($ctx !~ /.xW|.xE/ && $cc !~ /^}/) {
+ if ($ctx !~ /.x[WEC]/ && $cc !~ /^}/) {
ERROR("need space after that '$op' $at\n" . $hereptr);
}
@@ -1364,7 +1451,7 @@
# unary operator, or a cast
} elsif ($op eq '!' || $op eq '~' ||
($is_unary && ($op eq '*' || $op eq '-' || $op eq '&'))) {
- if ($ctx !~ /[WEB]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
+ if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
ERROR("need space before that '$op' $at\n" . $hereptr);
}
if ($ctx =~ /.xW/) {
@@ -1373,7 +1460,7 @@
# unary ++ and unary -- are allowed no space on one side.
} elsif ($op eq '++' or $op eq '--') {
- if ($ctx !~ /[WOB]x[^W]/ && $ctx !~ /[^W]x[WOBE]/) {
+ if ($ctx !~ /[WOBC]x[^W]/ && $ctx !~ /[^W]x[WOBEC]/) {
ERROR("need space one side of that '$op' $at\n" . $hereptr);
}
if ($ctx =~ /WxB/ || ($ctx =~ /Wx./ && $cc =~ /^;/)) {
@@ -1387,13 +1474,13 @@
$op eq '*' or $op eq '/' or
$op eq '%')
{
- if ($ctx !~ /VxV|WxW|VxE|WxE|VxO/) {
+ if ($ctx !~ /VxV|WxW|VxE|WxE|VxO|Cx.|.xC/) {
ERROR("need consistent spacing around '$op' $at\n" .
$hereptr);
}
# All the others need spaces both sides.
- } elsif ($ctx !~ /[EW]x[WE]/) {
+ } elsif ($ctx !~ /[EWC]x[CWE]/) {
# Ignore email addresses <foo@bar>
if (!($op eq '<' && $cb =~ /$;\S+\@\S+>/) &&
!($op eq '>' && $cb =~ /<\S+\@\S+$;/)) {
@@ -1551,7 +1638,7 @@
# multi-statement macros should be enclosed in a do while loop, grab the
# first statement and ensure its the whole macro if its not enclosed
-# in a known goot container
+# in a known good container
if ($prevline =~ /\#define.*\\/ &&
$prevline !~/(?:do\s+{|\(\{|\{)/ &&
$line !~ /(?:do\s+{|\(\{|\{)/ &&
@@ -1599,84 +1686,95 @@
# check for redundant bracing round if etc
if ($line =~ /(^.*)\bif\b/ && $1 !~ /else\s*$/) {
my ($level, $endln, @chunks) =
- ctx_statement_full($linenr, $realcnt, 0);
+ ctx_statement_full($linenr, $realcnt, 1);
#print "chunks<$#chunks> linenr<$linenr> endln<$endln> level<$level>\n";
- if ($#chunks > 1 && $level == 0) {
+ #print "APW: <<$chunks[1][0]>><<$chunks[1][1]>>\n";
+ if ($#chunks > 0 && $level == 0) {
my $allowed = 0;
my $seen = 0;
+ my $herectx = $here . "\n";;
+ my $ln = $linenr - 1;
for my $chunk (@chunks) {
my ($cond, $block) = @{$chunk};
+ $herectx .= "$rawlines[$ln]\n[...]\n";
+ $ln += statement_rawlines($block) - 1;
+
substr($block, 0, length($cond)) = '';
$seen++ if ($block =~ /^\s*{/);
- $block =~ s/(^|\n)./$1/g;
- $block =~ s/^\s*{//;
- $block =~ s/}\s*$//;
- $block =~ s/^\s*//;
- $block =~ s/\s*$//;
-
- my @lines = ($block =~ /\n/g);
- my @statements = ($block =~ /;/g);
-
- #print "cond<$cond> block<$block> lines<" . scalar(@lines) . "> statements<" . scalar(@statements) . "> seen<$seen> allowed<$allowed>\n";
- if (scalar(@lines) != 0) {
+ #print "cond<$cond> block<$block> allowed<$allowed>\n";
+ if (statement_lines($cond) > 1) {
+ #print "APW: ALLOWED: cond<$cond>\n";
$allowed = 1;
}
if ($block =~/\b(?:if|for|while)\b/) {
+ #print "APW: ALLOWED: block<$block>\n";
$allowed = 1;
}
- if (scalar(@statements) > 1) {
+ if (statement_block_size($block) > 1) {
+ #print "APW: ALLOWED: lines block<$block>\n";
$allowed = 1;
}
}
if ($seen && !$allowed) {
- WARN("braces {} are not necessary for any arm of this statement\n" . $herecurr);
- $suppress_ifbraces = $endln;
+ WARN("braces {} are not necessary for any arm of this statement\n" . $herectx);
}
+ # Either way we have looked over this whole
+ # statement and said what needs to be said.
+ $suppress_ifbraces = $endln;
}
}
if ($linenr > $suppress_ifbraces &&
$line =~ /\b(if|while|for|else)\b/) {
- # Locate the end of the opening statement.
- my @control = ctx_statement($linenr, $realcnt, 0);
- my $nr = $linenr + (scalar(@control) - 1);
- my $cnt = $realcnt - (scalar(@control) - 1);
+ my ($level, $endln, @chunks) =
+ ctx_statement_full($linenr, $realcnt, $-[0]);
- my $off = $realcnt - $cnt;
- #print "$off: line<$line>end<" . $lines[$nr - 1] . ">\n";
+ my $allowed = 0;
- # If this is is a braced statement group check it
- if ($lines[$nr - 1] =~ /{\s*$/) {
- my ($lvl, @block) = ctx_block_level($nr, $cnt);
-
- my $stmt = join("\n", @block);
- # Drop the diff line leader.
- $stmt =~ s/\n./\n/g;
- # Drop the code outside the block.
- $stmt =~ s/(^[^{]*){\s*//;
- my $before = $1;
- $stmt =~ s/\s*}([^}]*$)//;
- my $after = $1;
-
- #print "block<" . join(' ', @block) . "><" . scalar(@block) . ">\n";
- #print "before<$before> stmt<$stmt> after<$after>\n\n";
-
- # Count the newlines, if there is only one
- # then the block should not have {}'s.
- my @lines = ($stmt =~ /\n/g);
- my @statements = ($stmt =~ /;/g);
- #print "lines<" . scalar(@lines) . ">\n";
- #print "statements<" . scalar(@statements) . ">\n";
- if ($lvl == 0 && scalar(@lines) == 0 &&
- scalar(@statements) < 2 &&
- $stmt !~ /{/ && $stmt !~ /\bif\b/ &&
- $before !~ /}/ && $after !~ /{/) {
- my $herectx = "$here\n" . join("\n", @control, @block[1 .. $#block]) . "\n";
- shift(@block);
- WARN("braces {} are not necessary for single statement blocks\n" . $herectx);
+ # Check the pre-context.
+ if (substr($line, 0, $-[0]) =~ /(\}\s*)$/) {
+ #print "APW: ALLOWED: pre<$1>\n";
+ $allowed = 1;
+ }
+ # Check the condition.
+ my ($cond, $block) = @{$chunks[0]};
+ if (defined $cond) {
+ substr($block, 0, length($cond)) = '';
+ }
+ if (statement_lines($cond) > 1) {
+ #print "APW: ALLOWED: cond<$cond>\n";
+ $allowed = 1;
+ }
+ if ($block =~/\b(?:if|for|while)\b/) {
+ #print "APW: ALLOWED: block<$block>\n";
+ $allowed = 1;
+ }
+ if (statement_block_size($block) > 1) {
+ #print "APW: ALLOWED: lines block<$block>\n";
+ $allowed = 1;
+ }
+ # Check the post-context.
+ if (defined $chunks[1]) {
+ my ($cond, $block) = @{$chunks[1]};
+ if (defined $cond) {
+ substr($block, 0, length($cond)) = '';
}
+ if ($block =~ /^\s*\{/) {
+ #print "APW: ALLOWED: chunk-1 block<$block>\n";
+ $allowed = 1;
+ }
+ }
+ if ($level == 0 && $block =~ /^\s*\{/ && !$allowed) {
+ my $herectx = $here . "\n";;
+ my $end = $linenr + statement_rawlines($block) - 1;
+
+ for (my $ln = $linenr - 1; $ln < $end; $ln++) {
+ $herectx .= $rawlines[$ln] . "\n";;
+ }
+
+ WARN("braces {} are not necessary for single statement blocks\n" . $herectx);
}
}
@@ -1828,15 +1926,6 @@
print "are false positives report them to the maintainer, see\n";
print "CHECKPATCH in MAINTAINERS.\n";
}
- print <<EOL if ($file == 1 && $quiet == 0);
-
-WARNING: Using --file mode. Please do not send patches to linux-kernel
-that change whole existing files if you did not significantly change most
-of the the file for other reasons anyways or just wrote the file newly
-from scratch. Pure code style patches have a significant cost in a
-quickly changing code base like Linux because they cause rejects
-with other changes.
-EOL
return $clean;
}
