| /* Copyright (c) 2010, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/usb/msm_hsusb_hw.h> |
| #include <linux/usb/ulpi.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/chipidea.h> |
| |
| #include "ci.h" |
| |
| #define MSM_USB_BASE (udc->hw_bank.abs) |
| |
| static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event) |
| { |
| struct device *dev = udc->gadget.dev.parent; |
| int val; |
| |
| switch (event) { |
| case CI13XXX_CONTROLLER_RESET_EVENT: |
| dev_dbg(dev, "CI13XXX_CONTROLLER_RESET_EVENT received\n"); |
| writel(0, USB_AHBBURST); |
| writel(0, USB_AHBMODE); |
| break; |
| case CI13XXX_CONTROLLER_STOPPED_EVENT: |
| dev_dbg(dev, "CI13XXX_CONTROLLER_STOPPED_EVENT received\n"); |
| /* |
| * Put the transceiver in non-driving mode. Otherwise host |
| * may not detect soft-disconnection. |
| */ |
| val = usb_phy_io_read(udc->transceiver, ULPI_FUNC_CTRL); |
| val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; |
| val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; |
| usb_phy_io_write(udc->transceiver, val, ULPI_FUNC_CTRL); |
| break; |
| default: |
| dev_dbg(dev, "unknown ci13xxx_udc event\n"); |
| break; |
| } |
| } |
| |
| static struct ci13xxx_udc_driver ci13xxx_msm_udc_driver = { |
| .name = "ci13xxx_msm", |
| .flags = CI13XXX_REGS_SHARED | |
| CI13XXX_REQUIRE_TRANSCEIVER | |
| CI13XXX_PULLUP_ON_VBUS | |
| CI13XXX_DISABLE_STREAMING, |
| |
| .notify_event = ci13xxx_msm_notify_event, |
| }; |
| |
| static int ci13xxx_msm_probe(struct platform_device *pdev) |
| { |
| struct platform_device *plat_ci; |
| int ret; |
| |
| dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n"); |
| |
| plat_ci = platform_device_alloc("ci_hdrc", -1); |
| if (!plat_ci) { |
| dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n"); |
| return -ENOMEM; |
| } |
| |
| ret = platform_device_add_resources(plat_ci, pdev->resource, |
| pdev->num_resources); |
| if (ret) { |
| dev_err(&pdev->dev, "can't add resources to platform device\n"); |
| goto put_platform; |
| } |
| |
| ret = platform_device_add_data(plat_ci, &ci13xxx_msm_udc_driver, |
| sizeof(ci13xxx_msm_udc_driver)); |
| if (ret) |
| goto put_platform; |
| |
| ret = platform_device_add(plat_ci); |
| if (ret) |
| goto put_platform; |
| |
| pm_runtime_no_callbacks(&pdev->dev); |
| pm_runtime_enable(&pdev->dev); |
| |
| return 0; |
| |
| put_platform: |
| platform_device_put(plat_ci); |
| |
| return ret; |
| } |
| |
| static struct platform_driver ci13xxx_msm_driver = { |
| .probe = ci13xxx_msm_probe, |
| .driver = { .name = "msm_hsusb", }, |
| }; |
| MODULE_ALIAS("platform:msm_hsusb"); |
| |
| static int __init ci13xxx_msm_init(void) |
| { |
| return platform_driver_register(&ci13xxx_msm_driver); |
| } |
| module_init(ci13xxx_msm_init); |
| |
| MODULE_LICENSE("GPL v2"); |