/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
/*
 * MIPS specific definitions for NOLIBC
 * Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
 */

#ifndef _NOLIBC_ARCH_MIPS_H
#define _NOLIBC_ARCH_MIPS_H

/* O_* macros for fcntl/open are architecture-specific */
#define O_RDONLY            0
#define O_WRONLY            1
#define O_RDWR              2
#define O_APPEND       0x0008
#define O_NONBLOCK     0x0080
#define O_CREAT        0x0100
#define O_TRUNC        0x0200
#define O_EXCL         0x0400
#define O_NOCTTY       0x0800
#define O_DIRECTORY   0x10000

/* The struct returned by the stat() syscall. 88 bytes are returned by the
 * syscall.
 */
struct sys_stat_struct {
	unsigned int  st_dev;
	long          st_pad1[3];
	unsigned long st_ino;
	unsigned int  st_mode;
	unsigned int  st_nlink;
	unsigned int  st_uid;
	unsigned int  st_gid;
	unsigned int  st_rdev;
	long          st_pad2[2];
	long          st_size;
	long          st_pad3;

	long          st_atime;
	long          st_atime_nsec;
	long          st_mtime;
	long          st_mtime_nsec;

	long          st_ctime;
	long          st_ctime_nsec;
	long          st_blksize;
	long          st_blocks;
	long          st_pad4[14];
};

/* Syscalls for MIPS ABI O32 :
 *   - WARNING! there's always a delayed slot!
 *   - WARNING again, the syntax is different, registers take a '$' and numbers
 *     do not.
 *   - registers are 32-bit
 *   - stack is 8-byte aligned
 *   - syscall number is passed in v0 (starts at 0xfa0).
 *   - arguments are in a0, a1, a2, a3, then the stack. The caller needs to
 *     leave some room in the stack for the callee to save a0..a3 if needed.
 *   - Many registers are clobbered, in fact only a0..a2 and s0..s8 are
 *     preserved. See: https://www.linux-mips.org/wiki/Syscall as well as
 *     scall32-o32.S in the kernel sources.
 *   - the system call is performed by calling "syscall"
 *   - syscall return comes in v0, and register a3 needs to be checked to know
 *     if an error occurred, in which case errno is in v0.
 *   - the arguments are cast to long and assigned into the target registers
 *     which are then simply passed as registers to the asm code, so that we
 *     don't have to experience issues with register constraints.
 */

#define my_syscall0(num)                                                      \
({                                                                            \
	register long _num __asm__ ("v0") = (num);                            \
	register long _arg4 __asm__ ("a3");                                   \
	                                                                      \
	__asm__  volatile (                                                   \
		"addiu $sp, $sp, -32\n"                                       \
		"syscall\n"                                                   \
		"addiu $sp, $sp, 32\n"                                        \
		: "=r"(_num), "=r"(_arg4)                                     \
		: "r"(_num)                                                   \
		: "memory", "cc", "at", "v1", "hi", "lo",                     \
	          "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9"  \
	);                                                                    \
	_arg4 ? -_num : _num;                                                 \
})

#define my_syscall1(num, arg1)                                                \
({                                                                            \
	register long _num __asm__ ("v0") = (num);                            \
	register long _arg1 __asm__ ("a0") = (long)(arg1);                    \
	register long _arg4 __asm__ ("a3");                                   \
	                                                                      \
	__asm__  volatile (                                                   \
		"addiu $sp, $sp, -32\n"                                       \
		"syscall\n"                                                   \
		"addiu $sp, $sp, 32\n"                                        \
		: "=r"(_num), "=r"(_arg4)                                     \
		: "0"(_num),                                                  \
		  "r"(_arg1)                                                  \
		: "memory", "cc", "at", "v1", "hi", "lo",                     \
	          "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9"  \
	);                                                                    \
	_arg4 ? -_num : _num;                                                 \
})

#define my_syscall2(num, arg1, arg2)                                          \
({                                                                            \
	register long _num __asm__ ("v0") = (num);                            \
	register long _arg1 __asm__ ("a0") = (long)(arg1);                    \
	register long _arg2 __asm__ ("a1") = (long)(arg2);                    \
	register long _arg4 __asm__ ("a3");                                   \
	                                                                      \
	__asm__  volatile (                                                   \
		"addiu $sp, $sp, -32\n"                                       \
		"syscall\n"                                                   \
		"addiu $sp, $sp, 32\n"                                        \
		: "=r"(_num), "=r"(_arg4)                                     \
		: "0"(_num),                                                  \
		  "r"(_arg1), "r"(_arg2)                                      \
		: "memory", "cc", "at", "v1", "hi", "lo",                     \
	          "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9"  \
	);                                                                    \
	_arg4 ? -_num : _num;                                                 \
})

#define my_syscall3(num, arg1, arg2, arg3)                                    \
({                                                                            \
	register long _num __asm__ ("v0")  = (num);                           \
	register long _arg1 __asm__ ("a0") = (long)(arg1);                    \
	register long _arg2 __asm__ ("a1") = (long)(arg2);                    \
	register long _arg3 __asm__ ("a2") = (long)(arg3);                    \
	register long _arg4 __asm__ ("a3");                                   \
	                                                                      \
	__asm__  volatile (                                                   \
		"addiu $sp, $sp, -32\n"                                       \
		"syscall\n"                                                   \
		"addiu $sp, $sp, 32\n"                                        \
		: "=r"(_num), "=r"(_arg4)                                     \
		: "0"(_num),                                                  \
		  "r"(_arg1), "r"(_arg2), "r"(_arg3)                          \
		: "memory", "cc", "at", "v1", "hi", "lo",                     \
	          "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9"  \
	);                                                                    \
	_arg4 ? -_num : _num;                                                 \
})

#define my_syscall4(num, arg1, arg2, arg3, arg4)                              \
({                                                                            \
	register long _num __asm__ ("v0") = (num);                            \
	register long _arg1 __asm__ ("a0") = (long)(arg1);                    \
	register long _arg2 __asm__ ("a1") = (long)(arg2);                    \
	register long _arg3 __asm__ ("a2") = (long)(arg3);                    \
	register long _arg4 __asm__ ("a3") = (long)(arg4);                    \
	                                                                      \
	__asm__  volatile (                                                   \
		"addiu $sp, $sp, -32\n"                                       \
		"syscall\n"                                                   \
		"addiu $sp, $sp, 32\n"                                        \
		: "=r" (_num), "=r"(_arg4)                                    \
		: "0"(_num),                                                  \
		  "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4)              \
		: "memory", "cc", "at", "v1", "hi", "lo",                     \
	          "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9"  \
	);                                                                    \
	_arg4 ? -_num : _num;                                                 \
})

#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5)                        \
({                                                                            \
	register long _num __asm__ ("v0") = (num);                            \
	register long _arg1 __asm__ ("a0") = (long)(arg1);                    \
	register long _arg2 __asm__ ("a1") = (long)(arg2);                    \
	register long _arg3 __asm__ ("a2") = (long)(arg3);                    \
	register long _arg4 __asm__ ("a3") = (long)(arg4);                    \
	register long _arg5 = (long)(arg5);                                   \
	                                                                      \
	__asm__  volatile (                                                   \
		"addiu $sp, $sp, -32\n"                                       \
		"sw %7, 16($sp)\n"                                            \
		"syscall\n  "                                                 \
		"addiu $sp, $sp, 32\n"                                        \
		: "=r" (_num), "=r"(_arg4)                                    \
		: "0"(_num),                                                  \
		  "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5)  \
		: "memory", "cc", "at", "v1", "hi", "lo",                     \
	          "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9"  \
	);                                                                    \
	_arg4 ? -_num : _num;                                                 \
})

/* startup code, note that it's called __start on MIPS */
__asm__ (".section .text\n"
    ".weak __start\n"
    ".set nomips16\n"
    ".set    noreorder\n"
    ".option pic0\n"
    ".ent __start\n"
    "__start:\n"
    "lw $a0,($sp)\n"              // argc was in the stack
    "addiu  $a1, $sp, 4\n"        // argv = sp + 4
    "sll $a2, $a0, 2\n"           // a2 = argc * 4
    "add   $a2, $a2, $a1\n"       // envp = argv + 4*argc ...
    "addiu $a2, $a2, 4\n"         //        ... + 4
    "li $t0, -8\n"
    "and $sp, $sp, $t0\n"         // sp must be 8-byte aligned
    "addiu $sp,$sp,-16\n"         // the callee expects to save a0..a3 there!
    "jal main\n"                  // main() returns the status code, we'll exit with it.
    "nop\n"                       // delayed slot
    "move $a0, $v0\n"             // retrieve 32-bit exit code from v0
    "li $v0, 4001\n"              // NR_exit == 4001
    "syscall\n"
    ".end __start\n"
    "");

#endif // _NOLIBC_ARCH_MIPS_H